EZH2O TM In-Wall Recessed Bottle Filling Station with Soft Sides
|
|
|
- Leon Peters
- 5 years ago
- Views:
Transcription
1 PRODUCT FEATURES EZH2O TM In-Wall Recessed Bottle Filling Station with Soft Sides Models LZWS-SS8K & LZWS-SS28K IMAGES Complete with EZH2O In-Wall and Soft Sides models including ECH8 chiller ADA compliant design Sanitary, no-touch, sensor activation with automatic 20 - second shut - off timer WaterSentry Plus 000 gallon filter included Bi-level models include two ECH8 chillers and additional WaterSentry VII filter Silver ion anti-microbial protection Quick fill rate of. gpm Visual user interface display includes: Filter Monitor indicating when replacement is necessary Green Ticker counts the quantity of plastic bottles saved from waste Includes mounting frame for quick and simple installation Hinged door for easy servicing Model LZWS-SS8K Model LZWS-SS28K 0 LZWS-SS models shall provide 8.0 gph of 50 F 0 water at 90 F ambient and 80 0 inlet water. Bottle Filling station shall be recess design and constructed of 8 gauge Type 00 series stainless steel and ABS plastic. Shall include electronic sensor for no-touch activation with automatic 20-second shut-off timer. Shall provide. gpm flow rate with laminar flow to minimize splashing. Shall include anti-microbial protected plastic components. Fountain constructed of stainless steel and includes chilling system. Shall include WaterSentry Plus and VII filters, certified to NSF/ANSI 42 and 52 for lead reduction, with visual monitor to indicate when replacement is necessary. Shall meet ADA guidelines when properly installed. Shall be lead-free design which meets Safe Drinking Water Act and is certified to NSF/ANSI 6 and the California AB95. Unit shall be certified to UL99 and CAN/CSA 22.2 No C Replacement filter (available as single or packs of, 2, 24 or 48) 6292C Receptacle Adaptor Plug OPTIONAL ACCESSORIES Educational facilities Healthcare facilities Sport and fitness centers Airports Office buildings Other commercial buildings SUGGESTED SPECIFICATION APPLICATIONS Phone: Third Party Certified to: UL99 and CAN/CSA 22.2 No. 20 Lead-free compliance including NSF/ANSI 6 and CA AB95 NSF/ANSI 42 and 5 (Filter) In keeping with our policy of continuing product improvement, Elkay reserves the right to change specifications without notice. Please visit elkayusa.com for the most current version. 20 Elkay 4-70 (9/20)
2 40" 06mm FLOOR LINE ELKAY EZH2O In-Wall Non-Refrigerated 5/6" SCREWS OR BOLTS (0 REQ'D-NOT PROVIDED) SCREWS OR BOLTS 4 /2 4mm INSTALL (2) SCREWS (P/N ) IN BEFORE INSTALLING IN OPENING 8 /4" 476mm Phone:
3 " (25mm) 5-/8" (0mm) SHOWN ELECTRICAL INLET LOCATION ON 8" (20mm) TO FLOOR LINE BACK OF WALL TO BE 2" (05mm) MIN DEPTH ELKAY Filtered Single Soft Sides Refrigerated (80mm) ( WATER OUTLET) Filter mounted at chiller SHUT OFF VALVE BY OTHERS (28mm) OUTLET (206mm) WATER INLET (OPTIONAL) WALL LINE 4" (02mm) (502mm) (08mm) MINIMUM DEPTH BACK WALL LINE (42mm) (457mm) TRAP FURNISHED 5/6" SCREWS OR BOLTS (0 REQ'D-NOT PROVIDED) 7-/4" (959mm) (57mm) (59mm) (85mm) 27" (686mm) (79mm) ELECTRICAL INLET (794mm) HOOK RODS (2) P/N SCREWS OR BOLTS 4-/2 (4mm) FINISHED FLOOR (89mm) (4mm) INSTALL (2) SCREWS (P/N ) IN BEFORE INSTALLING IN OPENING SHELF P/N 2768C 8-/4" FLOOR LINE *A.D.A. REQUIREMENT NOTE:SERVICE STOP NOT INCLUDED. (279mm) Phone:
4 ROU GH -I N DI M EN SI ON S ELKAY Phone: EZH2O In-Wall Refrigerated
5 FLOOR LINE (0mm) SHOWN (20mm) TO FLOOR LINE MIN. DEPTH ELKAY Filtered Bi-Level Soft Sides Refrigerated Filter mounted at chiller (80mm) OUTLET WATER INLET ( WATER OUTLET) SHUT OFF VALVE BY OTHERS (206mm) 9 (28mm) (OPTIONAL) WALL LINE (02mm) (08mm) (978mm) (68mm) (08mm) (4mm) (457mm) (mm) MINIMUM DEPTH BACK WALL LINE TRAPS FURNISHED (2 REQ'D- NOT FURNISHED) (959mm) (57mm) 6 (65mm) (4mm) (00mm) (79mm) (59mm) (686mm) ELECTRICAL INLET (89mm) (946mm) (794mm) P/N (95mm) FINISHED FLOOR (4mm) *A.D.A. REQUIREMENT NOTE:SERVICE STOP NOT INCLUDED. (279mm) INSTALLING IN OPENING P/N P/N Phone:
EZH2O TM In-Wall Recessed Bottle Filling Station with Soft Sides (Filterless)
PRODUCT FEATURES EZH2O TM In-Wall Recessed Bottle Filling Station with Soft Sides (Filterless) Models EZWS-SS8K & EZWS-SS28K IMAGES Complete with EZH2O In-Wall and Soft Sides models including ECH8 chiller
STUDENT ORGANIZATION SUSTAINABILITY INITIATIVE (GREEN RFP) FUNDING PROPOSAL. Environmental Coalition. Przybylo
2013-14 STUDENT ORGANIZATION SUSTAINABILITY INITIATIVE (GREEN RFP) FUNDING PROPOSAL Part I- General Information: Name of Student Organization Contact/Responsible Person Contact Office Held/Title Contact
MODELS: SM & SMSS
Most Dependable Fountains, Inc. OPERATIONS MANUAL MODELS: 410-18 SM & 410-18 SMSS Most Dependable Fountains, Inc 5705 Commander Drive Arlington, TN 38002 800-552-6331 FOUNTAINS, MOST DEPENDABLE FOUNTAINS,
The City Of Winnipeg R1. St. Vital Park Pavilion Page 1 of 9
St. Vital Park Pavilion Page 1 of 9 Part 1 General 1.1 SECTION INCLUDES.1 Water closets..2 Urinals..3 Lavatories..4 Service sinks..5 Flush mounted wall box.6 Drinking Fountains 1.2 RELATED SECTIONS.1 Division
University of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 40 00_PLUMBING FIXTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5.
SPECIFICATION OPTICAL TERMINATION BOX for FTTx
SPECIFICATION OPTICAL TERMINATION BOX for FTTx Model Spec. No. VSOF-OUTLET-2C VSS-1106-OUTLET-2C-01A Quality Assurance Team Distribution Depts. Manufacturing Division Sales Division Management Division
SIGNAGE UGA DESIGN & CONSTRUCTION SUPPLEMENTAL GENERAL REQUIREMENTS & STANDARDS SEPTEMBER 16,
10 14 00 SIGNAGE 1. GENERAL A. Related sections: i. 00 00 09 - Room & Space Numbering ii. 26 56 00 Exterior Lighting (for requirements regarding exterior signage.) B. For projects at the University of
SYSTEM 1E LIQUID CHEMICAL STERILANT PROCESSING SYSTEM
SYSTEM 1E LIQUID CHEMICAL STERILANT PROCESSING SYSTEM APPLICATION For rapid, safe, standardized low-temperature liquid chemical sterilization of heat-sensitive critical and semi-critical devices. DESCRIPTION
MODELS: 475 WM & 475 WMSS
Most Dependable Fountains, Inc. OPERATIONS MANUAL MODELS: 475 WM & 475 WMSS Most Dependable Fountains, Inc 5705 Commander Drive Arlington, TN 38002 800-552-6331 FOUNTAINS, MOST DEPENDABLE FOUNTAINS, INC.
HALSEY TAYLOR OWNERS MANUAL Classic TM Series Barrier-Free Water Coolers Refrigerated Fountains with Back Panel
HALSEY TAYLOR OWNERS MANUAL Classic TM Series BarrierFree Water Coolers Refrigerated Fountains with Back Panel Figure HTERQ Figure HTSRQ Figure 3 HTSERQ Figure HTESRQ Figure 3 Model HTERQ HTSRQ HTSERQ
HALSEY TAYLOR OWNERS MANUAL Classic TM Series Barrier-Free Water Coolers Refrigerated Fountains with Back Panel
HALSEY TAYLOR OWNERS MANUAL Classic TM Series BarrierFree Water Coolers Refrigerated Fountains with Back Panel Figure HTERQ Figure HTSRQ Figure 3 HTSERQ Figure HTESRQ Figure 3 Model HTERQ HTSRQ HTSERQ
Australia s largest and leading manufacturer of drinking water coolers and industrial process water chillers
Australia s largest and leading manufacturer of drinking water coolers and industrial process water chillers About Us Aqua Cooler is a proudly Australian-based and -owned manufacturer of drinking water
recycle water reuse it save up to from showers & baths for flushing toilets 30% of water use
Residential recycle - Water reuse Recovery - save recycle water from showers & baths reuse it for flushing toilets save up to 30% of water use www.recoverwater.com How it works Greywater is lightly soiled
UNPARALLELED PERFORMANCE
UNPARALLELED PERFORMANCE PRODUCT CATALOGUE Section 02 SLOT DRAIN SYSTEM DESIGN PRODUCT CATALOGUE 23 02.1 System Design SLOT DRAIN PROFILES STAINLESS STEEL SLOT DRAIN FIBERGLASS SLOT DRAIN The Slot Drain
SCO Series - Air Jacketed Units. SHEL LAB CO2 Incubators
SCO Series - Air Jacketed Units SHEL LAB CO2 Incubators Ideal for Clinical, Analytical, and General Laboratory Applications SCO air jacketed CO2 incubators provides an optimized culturing environment with
Nairobi Funeral Home and Forensics BOREHOLE BILLS OF QUANTITIES
Nairobi Funeral Home and Forensics BOREHOLE BILLS OF QUANTITIES 26/10/2015 Item Description Qty Unit Supply, deliver, install, test and commission the following borehole equipment including all materials
Grease Interceptors. Design & Operation. Material & Characteristics
Grease Interceptors Dormont offers a full line of grease interceptors for installation on cooking/prep sinks, pot, pan & scullery sinks and dishwasher applications. Dormont offers a variety of interceptor
NEW FUELTEC MODEL 1025SS-UL
Overview The Model 1025SS-UL is a fuel oil filtration and maintenance system that automatically removes particulates and water from fuels in storage. A stand alone system that can be used indoors or outdoors
SECTION TOILET COMPARTMENTS. A. Section Metal Fabrications: Concealed steel support members.
SECTION 10155 TOILET COMPARTMENTS PART 1 GENERAL 1.1 SECTION INCLUDES A. Plastic laminate partitions. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Concealed steel support members. B. Section
SECTION MEDICATION CABINET. 1.1 SUMMARY A. Section Includes: 1. Medication cabinets with self-contained refrigerator and fixtures.
SECTION 12 35 70.21 MEDICATION CABINET SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Medication
B. System Design and Performance Requirements
15625 Water Chillers This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or in notes
SECTION PLUMBING FIXTURES. A. This specification describes the requirements for plumbing fixtures and their installation.
PART 1 - GENERAL 1.01 DESCRIPTION OF WORK: SECTION 15440 - PLUMBING FIXTURES A. This specification describes the requirements for plumbing fixtures and their installation. 1.02 SUBMITTALS: A. Submittals
SYSTEMS LTD. Leader in Linear Drain Solutions. A Publication of. Page 1. Randy Franzke. Cellar Master Supplies. Phone:
Page 1 SYSTEMS LTD. Leader in Linear Drain Solutions www.slotdrainsystems.com A Publication of Randy Franzke Cellar Master Supplies Phone: 707-307-8250 http://cellarmastersupplies.com Table of Contents
API 675 Evaluation. Section 1 General. 1.5 Referenced Publications. 1.1 Scope. 1.6 Unit Conversion. 1.2 Alternative Designs
API 675 Evaluation Evaluation of Pumps for Conformity to the Requirements of API Standard 675: Positive Displacement Pumps Controlled Volume. Second Edition, October 1994 Section 1 General 1.1 Scope API
6 10ES COMBITHERM ITEM NO. additional product color. oven function. SHORT FORM SPECIFICATIONS: MODELS: STANDARD FEATURES AND ACCESSORIES
COMBITHERM 6 10ES ITEM NO. Cook by internal product temperature or time with temperature variable steam, convection heat, or a combination of both to roast, steam, bake, or oven-fry in a single piece of
SECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
The factory assembled air handler shall conform to the requirements outlined ASHRAE 90.1.
PAGE 1 of 5 1.1. REFERENCE STANDARDS 1.1.1. The factory assembled air handler shall conform to the requirements outlined ASHRAE 90.1. 1.1.2. Unit shall be designed to conform to ASHRAE 15. 1.1.3. Unit
Gas Station & C Store SECTION CWM Job No
SECTION 22 4000 - PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide labor, materials, equipment and services to perform operations required for the complete installation and related Work as required in Contract
SECTION COOLING TOWER
PART 1 GENERAL 1.1 SECTION INCLUDES A. Mechanical induced draft Cooling Tower B. Controls C. Ladder and handrails 1.2 REFERENCES SECTION 23 65 00 COOLING TOWER A. ANSI/AFBMA 9 - Load Rating and Fatigue
Fiberglass Cooling Towers
Fiberglass Cooling Towers Available in sizes from 100 to 240 tons. FC Series 700 Fiberglass Cooling Tower Available in sizes from 170 to 240 tons. No other fiberglass cooling tower comes with as many high-quality
ultra The Ultimate Sensor Faucet
ultra The Ultimate Sensor Faucet ultra First Choice for Any Application When it comes to meeting the highest hygiene standards, water and energy-saving requirements, and ensuring safety against vandalism,
Welcome: What is U-Drain? Drain Materials. Flow
Welcome: Thank you for looking into the U-Drain floor drain system. This paper will explore the functional features of the U-Drain and why it is superior to other grated systems in the marketplace. We
SECTION PLUMBING SPECIALTIES
PART 1 GENERAL 1.1 SCOPE SECTION 22 20 00 PLUMBING SPECIALTIES A. Work consists of all plumbing work indicated on drawings and specified herein. B. Also included are all fees and permits for installation
SECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
Welcome: What is U Drain? Drain Materials. Cost Comparisons
Welcome: Thank you for looking into the U Drain floor drain system. This paper will explore the functional features of the U Drain and why it is superior to other grated systems in the marketplace. We
SECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION
SECTION 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 - GENERAL 1.1 SUMMARY A. This section supplements all sections in this division, including pipe, fittings, valves, and connections for sprinkler
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
PUBLIC RESTROOMS, DESIGN INTENT Los Angeles World Airports
1.1 STRUCTURAL A. To the extent possible, metal stud partitions will be constructed on a 6 high concrete curb. B. Plumbing chase and Custodial Rooms will have 6 high concrete curb at all perimeter walls.
499AOZ. Features and Applications. Dissolved Ozone Sensor. Product Data Sheet LIQ-PDS-499-AOZ March Rugged construction.
Product Data Sheet LIQ-PDS-499-AOZ March 2016 Dissolved Ozone Sensor Rugged construction. Easily replaceable membrane; no special tools required. Automatic compensation for changes in membrane permeability
UFR+L FILTER REGULATOR + LUBRICATOR
FEATURES The UFR+L filter regulator + lubricator is intended for the treatment of compressed air or compressed gas. Its function is that of supplying filtered, lubricated air at the desired pressure for
Bathrooms for Behavioral Healthcare Facilities
Bathrooms for Behavioral Healthcare Facilities Intersan Manufacturing 1 Behavioral Bathroom DESIGNING FOR BEHAVIO- RAL HEALTHCARE A safe environment is critical; however, no environment can be entirely
ALBERTA INFRASTRUCTURE CORROSION RATE MONITORING PROGRAM
ALBERTA INFRASTRUCTURE CORROSION RATE MONITORING PROGRAM Presented at Alberta Infrastructure Property Management Water Treatment Co-ordinators' Meeting #37 Sam Livingston Fish Hatchery Calgary, Alberta
Ambient Dust Sampling
Air/ Dust Ambient Dust Sampling Dust Deposit Gauge A low cost dust gauge that measures dust deposition, i.e. dust falling from the sky and is measured in milligrams per square meter per day (mg/m 2 /day)
t y p e V S A S E W A G E P U M P
Pe r fo r m a n ce C h a r t 65 6 55 45 4 35 3 25 2 12 11 1 / 2 11 1 1 / 2 1 9 1 / 2 6% 7% 76% 7 1 HP 1/2 HP HP 76% 7% 6% C u r v e P a g e V S A - 5 1 1 5 R P M M O D E L : V S A - 6 H D I S C H A R G
Construction Standards PAGE
Construction Standards PAGE 102810-1 SECTION 102810 - PART 1 - GENERAL 1.1 M.S.U. ISSUES A. Mirrors will normally be provided at all lavatory locations. Provide full-length mirror on adjacent wall for
SECTION ROTARY SCREW WATER CHILLERS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
special male. Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions
82-200 special male Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder end, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft
SECTION PLUMBING DRAINAGE AND CONTAINMENT. Copyright Specialloy Industries Inc. dba Slot Drain Systems - All rights reserved
SECTION 22 14 00 - PLUMBING DRAINAGE AND CONTAINMENT Copyright 1998-2017 Specialloy Industries Inc. dba Slot Drain Systems - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. SLOT shaped, non-grated,
RESIDENTIAL WATER FILTRATION GUIDE
RESIDENTIAL WATER FILTRATION GUIDE LET S MAKE ONE THING PERFECTLY CLEAR Common disinfection methods can cause undesirable tastes and odors in tap water. And even water that meets all applicable standards
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
SPACE TYPE: PHYSICAL FITNESS (EXERCISE ROOM)
SPACE TYPE: PHYSICAL FITNESS (EXERCISE ROOM) Construction Criteria The unit costs for the Physical Fitness Center (Exercise Room) space type are based on the construction quality and design features in
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88L-F40 SERIES Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
SECTION The specification section is organized by placing information in three standard parts:
SECTION 14244 LIMITED USE HYDRAULIC ELEVATOR ***** Since 1982 Liftavator, Inc. has provided limited use/limited application (LU/LA) elevators, residential elevators, hydraulic vertical platform wheelchair
SECTION SHOWER AND DRESSING COMPARTMENTS
SECTION 10 21 16 SHOWER AND DRESSING COMPARTMENTS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes:
BuildingName The Description of the Project P DOCUMENTS
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
INSTALLATION MANUAL RECTANGULAR COLUMN
INSTALLATION MANUAL RECTANGULAR COLUMN Model # 5502 OVERVIEW The Rectangular Column is a UL-listed, multi-sided, vertical hospital modular service assembly. This system uses vertical and/or horizontal
88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE THRU 2
CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5 THRU 2 STANDARD LIST 2 Retainer ASTM A108 Type 1215 9 Gland Plate 302 or 304 SS 10 Stem Nut 316 SS ASTM A108, Carbon Steel, Chrome Plated
03.01 DESIGN REQUIREMENTS
03.01 DESIGN REQUIREMENTS A. OVERALL CONSIDERATIONS 1. Design using forms and materials that are "harmonious and timeless" and that blend with neighboring buildings and the campus as a whole. 2. Achieve
KEYSTONE SLIDE GATE VALVES FIGURE 215
Slide through, O-port gate design for severe service applications FEATURES GENERAL APPLICATION For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining
Figure 215. Slide through, O-port gate design for severe service applications. Features
Slide through, O-port gate design for severe service applications Features General Application For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining
SPECIFICATIONS - DETAILED PROVISIONS SECTION EMERGENCY EYEWASH/SHOWER UNITS TABLE OF C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS SECTION 15430 EMERGENCY EYEWASH/SHOWER UNITS TABLE OF C O N T E N T S PART 1 GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 SUBMITTALS... 1 1.04 QUALITY ASSURANCE...
.1 Capped for future connection by others. .2 Section Waste Management and Disposal.
Reissued 2006/03/01 Section 15411 Plumbing Fixtures and Trim Page 1 of 7 PART 1 GENERAL 1.1 PRODUCTS INSTALLED BUT NOT SUPPLIED UNDER THIS SECTION.1 Install rough-in for equipment supplied by others, complete
About Us. In business since JC Carter designed the first cryogenic submerged motor pump in of 4 Large Test Facilities in the World
Welcome! About Us In business since 1947 JC Carter designed the first cryogenic submerged motor pump in 1961 1 of 4 Large Test Facilities in the World ISO 9001 Certified James Coolidge Carter (JC Carter)
PART 1- General LULA Elevator Section 14200
PART 1- General LULA Elevator Section 14200 1.1 Scope To furnish all labour, materials and equipment necessary or required to fully complete the installation of the lift as indicated on the drawings and
MODELS: 24 SM & 24 SMSS
Most Dependable Fountains, Inc. OPERATIONS MANUAL MODELS: 24 SM & 24 SMSS Most Dependable Fountains, Inc 5705 Commander Drive Arlington, TN 38002 800-552-6331 FOUNTAINS, MOST DEPENDABLE FOUNTAINS, INC.
SECTION TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS. A. Solid composite phenolic toilet compartments and urinal screens.
SECTION 102113 TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Solid composite phenolic toilet compartments and urinal screens. 1.02 RELATED SECTIONS
87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
.1 Capped for future connection by others. .2 Section Waste Management and Disposal.
Reissued 2006/08/01 Section 15411 Plumbing Fixtures and Trim Page 1 of 7 PART 1 GENERAL 1.1 PRODUCTS INSTALLED BUT NOT SUPPLIED UNDER THIS SECTION.1 Install rough in for equipment supplied by others, complete
87A-100 SERIES. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
87A-100 SERIES Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
DESIGN AND CONSTRUCTION STANDARDS SPECIFICATION GUIDELINES
SECTION 08 70 00 - HARDWARE SCOPE OF WORK The Architect shall specify for the provision and installation of all items known commercially as builders hardware or door hardware. This shall include, but is
SECTION METAL STUDENT LOCKERS
SECTION 10 51 13 - METAL STUDENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES 1. DESCRIPTION: Furnish and install Heavy-Duty Ventilated (HDV) ELITE Metal Lockers, complete, as shown and specified per contract
88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
For ADA Lever Locks. Uni Force Door Edge Guard. For Door Locks with Large Backsets. For Standard Door Locks. For Schlage Deadbolts DOOR REINFORCERS
General Features Protects home and family Saves door replacement Uni Force Door Edge Guard For deadbolt & key in knob locks For all backsets Makes door as strong as lock Long screws provide maximum strength
Thermostatic expansion valves for R290 Product type TUB / TUBE and TCBE
Data sheet Thermostatic expansion valves for R290 Product type and TUB/ and valves are made of stainless steel and are therefore very suitable for refrigeration systems in the food industry. Applications:
Water headers are made of reinforced plastic and the design of the spray tree ensures uniform water distribution.
COOLING TOWERS Main features of CT series cooling towers Standard Modural design Towers are constructed of standardized panels fabricated from heavy gauge hot-dip galvanized steel. Final assembly is made
SPACE TYPE: ENHANCED OFFICE
SPACE TYPE: ENHANCED OFFICE Construction Criteria The unit costs for Enhanced Office space types are based on the construction quality and design features in the following table. This information has been
SYSTEM 600 BILL CHANGER INSTALLATION INSTRUCTIONS Congratulations...
www.standardchange.com 1-800-968-6955 Technical Phone Support is from 8:00AM to 7:30PM E.S.T., Monday-Friday Walk-in Service is from 8:00AM to 4:30PM E.S.T., Monday-Friday Parts Department is from 8:00AM
CRITICAL FUEL FILTRATION SYSTEM For Fuel Storage Up To 10,000 Gallons (38,000 liters)
CRITICAL FUEL FILTRATION SYSTEM For Fuel Storage Up To 10,000 Gallons (38,000 liters) Overview Model CF4.0-PLC The Model 4.0-PLC is a fuel oil filtration and maintenance system that automatically removes
Mobile Storage Solutions. Presentation LIT-PD-0059-R01
Mobile Storage Solutions Presentation LIT-PD-0059-R01 Providing High-Density storage solutions since 1972. Industry leader in efficient and economic storage systems in Office, Industrial, Warehouse, Retail,
7 14ESG COMBITHERM ITEM NO. Gold-n-Brown feature provides the operator with the ability to add additional product color. oven function.
COMBITHERM 7 14ESG ITEM NO. MODEL 7 14ESG DELUXE CAPACITY OF FOURTEEN (14) FULL-SIZE OR GN 1/1 PANS, SEVEN (7) FULL-SIZE SHEET OR GN 2/1 PANS Flash-steam generation makes conventional steam generator obsolete:
DESIGN PACKAGE. COMMONS PARK Twin Falls, Idaho
DESIGN PACKAGE A WATER FEATURE HYDRAULIC DESIGN FOR COMMONS PARK Twin Falls, Idaho P16375-R5 6-16-17 Prepared by FOUNTAIN PEOPLE P.O. Box 807 4600 Highway 123 San Marcos, Texas 78666 SPECIAL DESIGN CONSIDERATIONS
SECTION HEALTHCARE CASEWORK (SYNTHESIS CASEWORK COLLECTION BY MIDMARK)
Midmark is more than just a manufacturer of healthcare products. We are a provider of innovation solutions that work for you. We have an experienced staff that coordinates projects for custom casework
Fun Industries Inc. G100D Grabber Deluxe Operation Instructions
Fun Industries Inc. G100D Grabber Deluxe Operation Instructions After removing all protective film from the machines walls and decals, the following pages will guide you through the process of assembling,
13 Lock tab washer 304 SS 14 Lever and grip Stl-zinc plt-w/vinyl PRODUCT NUMBER
83R-240 SERIES Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1.5 & 2 Socket Weld, 800 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
VSS S U B M E R S I B L E S E W A G E P U M P S
7 2 9 8 / 2 3 HP % % 64% 7 5 HP HP 5 HP % % C u r v e P a g e V S S - 4 5 R P M M O D E L : V S S - 4 E I M P E L L E R : V S A - 4 C - 2-5 A l s o a p p l i e s t o V S S - 5 E & V S S - 6 E 7 7 65 55
SECTION STANDPIPE AND HOSE SYSTEMS
SECTION 15375 STANDPIPE AND HOSE SYSTEMS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: A complete fire protection standpipe system including necessary accessories as indicated on Construction Documents,
1. Section "Residential Plumbing Fixtures" for residential sinks.
SECTION 224216.16 - COMMERCIAL SINKS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
SECTION PLUMBING FIXTURES
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
Melhart Music Center Modular Music Practice Rooms - E3 Ready Specifications Section 13034
Melhart Music Center Modular Music Practice Rooms - E3 Ready Specifications Section 13034 PART 1 - General 1.01 Summary A. Section includes labor, material, equipment, and other considerations required
SECTION METAL EQUIPMENT LOCKERS
SECTION 10 51 13 - METAL EQUIPMENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
MODELS: 36 DB & 36 DBSS
Most Dependable Fountains, Inc. OPERATIONS MANUAL MODELS: 36 DB & 36 DBSS Most Dependable Fountains, Inc 5705 Commander Drive Arlington, TN 38002 800-552-6331 FOUNTAINS, MOST DEPENDABLE FOUNTAINS, INC.
Laboratory Evaluation Report Form for: Trap Seal Primer Valves Drainage Types and Electronic Design Types
American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report Form for: Trap Seal Primer Valves Drainage Types and Electronic Design Types Tested for compliance to