PRIMAL SF-208ER Binder

Transcription

1 Technical Data Sheet PRIMAL SF-208ER Binder Based on Formashield Technology For Functional Interior Wall Paints Regional availability Product Description EMEA PRIMAL SF-208ER is an aqueous, styrene-acrylic binder designed for the formulation of semi-gloss to matt paints which can contribute to the reduction of the formaldehyde (and other aldehydes) content present in an indoor atmosphere. Key Features Low odour No coalescing agent required for film formation Ambient cross linking technology Wide formulating window with good balance of dry film properties Typical Physical Properties (Not to be used as specifications) Property Typical Values Appearance Milky liquid Solids content % % ph Viscosity (LVT, 2#,60rpm,25 ) 500 cps max. Minimum film formation temperature ~4 C Specific gravity (wet polymer) 1.04 g/cm 3 Specific gravity (dry polymer) 1.09 g/cm 3 Page: 1 of 5 PRIMAL SF-208ER Binder / Dow Coating Materials Rev 1: Feb. 2018

2 Formulation Guidelines PRIMAL SF-208ER Binder can be formulated like many other conventional self film forming styrene-acrylic binders. It is compatible with many types of pigments, extenders, dispersing agents and rheology modifiers. However aldehyde releasing raw materials should be avoided since they can affect the performance of paint films based on PRIMAL SF-208ER. Dispersants DOW hydrophobically modified dispersing agent OROTAN 731A ER Dispersant is our recommendation for high quality interior paints based on PRIMAL SF-208ER Binder in order to provide best paint stability and film performance. Defoamers In semi-gloss to satin paints formulations, the best results were achieved by using DOWSIL 108F Additive in the grind. Addition of ~0.1% weight of DOWSIL 108F or DOWSIL 8590 in the letdown can be done if needed. For matt paints, addition of 0.2% DOWSIL 111F in the grind was found to provide very good efficiency. Rheology Modifiers and Thickeners HEUR thickeners like ACRYSOL RM-5000 or ACRYSOL RM-2020E Rheology Modifiers were found to be the most suitable to achieve application properties and provide good film resistance such as wet scrub and stain resistance. If higher low shear viscosity is required, the addition of low level of ACRYSOL RM-8W / ACRYSOL RM-8WE or ACRYSOL RM-855 can be done. Coalescents and Co-solvents Primal SF-208ER has a low film forming temperature so does not require addition of any coalescing agent. Extenders and Opaque Polymer Primal SF-208ER can be formulated with any common extenders in a broad range of PVC s. The use of ROPAQUE Ultra E Organic Opacifier can help reduce the amount of titanium dioxide, thus formulation cost without affecting dry film appearance and resistance characteristics. Biocides Although standard in can preservatives could be used in paint formulations, it is always recommended to test them for compatibility and efficacy. As in can preservatives, we recommend the use of ROCIMA MB2X Biocide. If PRIMAL SF-208ER Binder is used in wet rooms, it is suggested to use a film preservative like BIOBAN 350 Polymer Shielded Technology. Aldehyde releasing biocides should be avoided since they can affect the performance of paint films based on PRIMAL SF-208ER. Page: 2 of 5 PRIMAL SF-208ER Binder / Dow Coating Materials Rev 1. Feb 2018

3 Semi-gloss paint based on PRIMAL SF-208ER Binder IWP Material name Kilograms Liters PVC Grind Water DOWSIL 108F Additive OROTAN 731A ER Dispersant ACRYSOL RM-5000 Rheology Modifier Ti-Pure R-706 Titanium dioxide % Minex S6 Extender % Let Down Grind Sub-total PRIMAL SF-208ER Binder ACRYSOL RM-5000 Rheology Modifier ACRYSOL RM-8WE Rheology Modifier Water Totals % Paint Properties Total PVC: 34.0% Volume Solids: 38.1% Weight Solids: 52.5% Wet Density: 1.31 Dry Density 1.80 Viscosities Krebs Stormer (KU): ICI Cone & Plate (Poise): Film Properties Gloss 20 : 1.7 Gloss 60 : 8.4 Gloss 85 : 11.3 Page: 3 of 5 PRIMAL SF-208ER Binder / Dow Coating Materials Rev 1. Feb 2018

4 Matt paint based on PRIMAL SF-208ER Binder IWP Material name Kilograms Liters PVC Grind Water CELLOSIZE QP 4400H HEC OROTAN N-4045 Dispersing Agent KTPP Dispersing Agent DOWSIL 111F Additive Tioxide TR-92 Titanium pigment % Finntalc M15 Extender % Durcal 5 Extender % Durcal 2 Extender % Let Down Grind Sub-total PRIMAL SF-208ER Binder ACRYSOL RM-2020E Rheology Modifier Water Totals % Paint Properties Total PVC: 69.9% Volume Solids: 39.9% Weight Solids: 61.0% Wet Density: 1.55 Dry Density 2.36 Viscosities Krebs Stormer (KU): ICI Cone & Plate (Poise): Film Properties Gloss 20 : 1.0 Gloss 60 : 1.8 Gloss 85 : 2.4 Page: 4 of 5 PRIMAL SF-208ER Binder / Dow Coating Materials Rev 1. Feb 2018

5 Handling Precautions Storage Disposal Considerations Before using this product, consult the Material Safety Data Sheet (MSDS)/Safety Data Sheet (SDS) for details on product hazards, recommended handling precautions and product storage. CAUTION! Failure to maintain proper volume level when using immersion heaters can expose tank and solution to excessive heat resulting in a possible combustion hazard, particularly when plastic tanks are used. Store products in tightly closed original containers at temperatures recommended on the product label. Dispose in accordance with all local, state (provincial) and federal regulations. Empty containers may contain hazardous residues. This material and its container must be disposed in a safe and legal manner. It is the user's responsibility to verify that treatment and disposal procedures comply with local, state (provincial) and federal regulations. Contact your Dow Coating Materials Technical Representative for more information. Chemical Registration Note on EMEA Product Line Product Stewardship Customer Notice For more information visit our website: To contact us, call: Europe, Middle East & Africa: India: Or visit our page: contact-us Many countries within EMEA require the registration of chemicals, either imported or produced locally, prior to their commercial use. Violation of these regulations may lead to substantial penalties imposed upon the user, the importer or manufacturer, and/or cessation of supply. It is in your interests to ensure that all chemicals used by you are registered. Dow does not supply unregistered products unless permitted under limited sampling procedures as a precursor to registration. Product availability and grades vary throughout the countries in EMEA. Please contact your local Dow Coating Materials representative for further information and samples. Dow has a fundamental concern for all who make, distribute, and use its products, and for the environment in which we live. This concern is the basis for our product stewardship philosophy by which we assess the safety, health, and environmental information on our products and then take appropriate steps to protect employee and public health and our environment. The success of our product stewardship program rests with each and every individual involved with Dow products - from the initial concept and research, to manufacture, use, sale, disposal, and recycle of each product. Dow strongly encourages its customers to review both their manufacturing processes and their applications of Dow products from the standpoint of human health and environmental quality to ensure that Dow products are not used in ways for which they are not intended or tested. Dow personnel are available to answer your questions and to provide reasonable technical support. Dow product literature, including safety data sheets, should be consulted prior to use of Dow products. Current safety data sheets are available from Dow. Notice: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries. Dow assumes no obligation or liability for the information in this document. References to Dow or the Company mean the Dow legal entity selling the products to Customer unless otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. Page: 5 of 5 PRIMAL SF-208ER Binder / Dow Coating Materials Rev 1. Feb 2018