2018 Iowa Energy Efficiency Program Updates

Transcription

1 2018 Iowa Energy Efficiency Program Updates New Measures Equipment LED Replacement for Pin-based CFL Lamps New $5.00/lamp Lamps must be listed on the DLC QPL as "LED Replacement for Pin-Based CFL Lamps (UL Type A). UL Type B pin-based lamps do not qualify for prescriptive rebates but can be reviewed through the Custom option. Transitioning to a prescriptive incentive after a large quantity of custom projects reviewed through the Equipment and Commercial Energy Solutions programs. Existing Program/Measure Updates All Assessment Programs Insulation Measures Cap The insulation rebate payment cannot exceed 50 percent of the install cost (equipment + reasonable contractor labor only). All Programs Custom Projects and Project Installation Notification Submittal s based on first year savings and calculated according to improvements made. Electric improvements HVAC - $0.12/kWh saved Lighting - $0.10/kWh saved Process/Other - $0.08/kWh saved Gas improvements All improvement types - $2.00/therm saved Projects must be completed within six months of preapproval letter unless otherwise noted within preapproval letter. 1

2 2018 Iowa Energy Efficiency Program Updates All Residential and All Residential and Cap Prescriptive Programs Prescriptive Rebates All Residential and Prescriptive Programs Commercial Energy Solutions All Residential and Prescriptive Rebates Building Optimization Services Application Submittal Deadline cap For prescriptive rebates, the rebate payment cannot exceed 50 percent of the install cost (equipment + reasonable contractor labor only). N/A Total incentive cannot exceed 65 percent of total study and implementation cost. All rebate applications, required documentation and invoices must be submitted by Dec. 31, HomeCheck Assessments Assessment Deadline N/A HomeCheck on-site energy assessment must be completed by Oct. 1, HomeCheck Assessment Measure Eligibility N/A Facility must be built before Jan. 1, HomeCheck Bonus Rebate Application Submittal Deadline N/A Upgrades must be installed and rebate applications must be submitted by Nov. 30, 2018, to be eligible for the bonus payment. Industrial Partners cap Total incentive cannot exceed 65 percent of eligible project costs. Multifamily Assessments Measure Eligibility N/A Facility must be built before Jan. 1, New Homes Application Submittal Deadline N/A Application must be submitted by Mar. 1, 2019, if pre-enrolled by Dec. 31, 2018, to be eligible for the 2

3 2018 Iowa Energy Efficiency Program Updates Equipment - Commercial Kitchen Equipment LED Refrigerated Case Lighting 5- and 6-foot doors $45/door Adjusting incentives to market conditions. Air Source Heat Pumps $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive Central Air Conditioner Small < 65 MBtuh Ductless Minisplit Heat Pumps Electronically Commutated Furnace Fan Motors $50/ton for SEER, $100/ton for SEER, $300/ton for 17 SEER and $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive $50/unit Reduction in Natural Gas Boiler $4/MBTU for AFUE, $5/MBTU for AFUE, $6.50/MBTU for.95 AFUE and Increase in Natural Gas Furnace $300/unit Reduction in Packaged Terminal Air Conditioners New Construction - EER 13.8 $35/ton Reduction in rebate 3

4 2018 Iowa Energy Efficiency Program Updates Packaged Terminal Air Conditioners Replacement units - $35/ton Reduction in rebate Equipment - Lighting Equipment Lighting Equipment Lighting Equipment - Lighting Equipment - Lighting Equipment VSD EER 10.9 LED Hanging/Suspended Fixtures $30/fixture Adjusting incentives to market conditions. LED Refrigerated Case Lighting 5- and 6-foot doors $45/door Adjusting incentives to market conditions. LED Traffic Lights Rebate N/A Measure eliminated. LED Troffer and Wrap Fixture LED Troffer and Wrap Fixture Retrofit Variable Speed Drives $30/fixture Adjusting incentives to market conditions. $15/fixture Adjusting incentives to market conditions. Measure Eligibility & $60/HP of motor driven Residential Equipment Air Source Heat Pump $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive Residential Equipment Central Air Conditioner $50/ton for 15 to 15.9 SEER, $100/ton for SEER, $300/ton for 17 SEER and Increase in Rebates are available for VSDs controlling 1-75 horsepower motors driving fans or centrifugal pumps for process applications. 4

5 2018 Iowa Energy Efficiency Program Updates Residential Equipment Central Air Conditioner Application Submittal Deadline Residential Equipment Ductless Minisplit Air Conditioner N/A $50/ton for 15 to 15.9 SEER, $100/ton for SEER, $300/ton for 17 SEER and Rebate applications for central air conditioners installed after Oct. 1, 2018 but not SAVE tested before Dec. 31, 2018 can be submitted up to Sept. 30, 2019, if preenrolled by Dec. 31, However, will receive the 2019 Residential Equipment Ductless Minisplit Air Source Heat Pump $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive Residential Equipment Furnace Fans $50/unit Reduction in Residential Equipment Natural Gas Furnace $300/unit Reduction in Pilot Programs Multifamily Air Infiltration Reduction Pilot CES Small Business Direct Install Lighting Attic Insulation and Air Sealing New Direct install - no cost to customer Lighting /Eligibility $0.16 per kwh saved Eliminating bonus rebates for LED linear lamps and troffers This pilot is expected to begin late 2017 and is available to multifamily properties in the Des Moines metro area. The pilot is limited to 500,000 square feet. Expanding the pilot offering statewide. 5

6 2018 Illinois Energy Efficiency Program Updates New Measures Equipment LED Replacement for Pin-based CFL Lamps New $5.00/lamp Lamps must be listed on the DLC QPL as "LED Replacement for Pin-Based CFL Lamps (UL Type A). UL Type B pin-based lamps do not qualify for prescriptive rebates but can be reviewed through the Custom option. Transitioning to a prescriptive incentive after a large quantity of custom projects reviewed through the Equipment and Commercial Energy Solutions programs. Existing Program/Measure Updates All Assessment Programs Insulation Measures Cap The insulation rebate payment cannot exceed 50 percent of the install cost (equipment + reasonable contractor labor only). All Programs Custom Projects and Project Installation Notification Submittal s based on first year savings and calculated according to improvements made. Electric improvements HVAC - $0.12/kWh saved Lighting - $0.10/kWh saved Process/Other - $0.08/kWh saved Gas improvements All improvement types - $2.00/therm saved Projects must be completed within six months of preapproval letter unless otherwise noted within preapproval letter. 1

7 2018 Illinois Energy Efficiency Program Updates All Residential and All Residential and Cap Prescriptive Programs Prescriptive Rebates All Residential and Prescriptive Programs Commercial Energy Solutions All Residential and Prescriptive Rebates Building Optimization Services Application Submittal Deadline cap For prescriptive rebates, the rebate payment cannot exceed 50 percent of the install cost (equipment + reasonable contractor labor only). N/A Total incentive cannot exceed 65 percent of total study and implementation cost All rebate applications, required documentation and invoices must be submitted by Dec. 31, HomeCheck Assessments Assessment Deadline N/A HomeCheck on-site energy assessment must be completed by Oct. 1, 2018 HomeCheck Assessment Measure Eligibility N/A Facility must be built before Jan. 1, HomeCheck Bonus Rebate Application Submittal Deadline N/A Upgrades must be installed and rebate applications must be submitted by Nov. 30, 2018, to be eligible for the bonus payment. Industrial Partners cap Total incentive cannot exceed 65 percent of eligible project costs. Equipment - Commercial Kitchen Equipment LED Refrigerated Case Lighting 5- and 6-foot doors $45/door Adjusting incentives to market conditions. 2

8 2018 Illinois Energy Efficiency Program Updates Air Source Heat Pumps $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and Central Air Conditioner Small < 65 MBtuh Ductless Minisplit Heat Pumps Electronically Commutated Furnace Fan Motors No HSPF incentive $50/ton for SEER, $100/ton for SEER, $300/ton for 17 SEER and $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive $50/unit Reduction in rebate Natural Gas Boiler $4/MBTU for AFUE, $5/MBTU for AFUE, $6.50/MBTU for.95 AFUE and Increase in rebate Natural Gas Furnace $300/unit Reduction in rebate Packaged Terminal Air Conditioners New Construction - EER 13.8 Packaged Terminal Air Conditioners Replacement units - EER 10.9 $35/ton Reduction in rebate $35/ton Reduction in rebate 3

9 2018 Illinois Energy Efficiency Program Updates Equipment - Lighting LED Hanging/Suspended Fixtures $30/fixture Adjusting incentives to market conditions Equipment Lighting Equipment - Lighting Equipment - Lighting Equipment VSD LED Refrigerated Case Lighting 5- and 6-foot doors LED Troffer and Wrap Fixture LED Troffer and Wrap Fixture Retrofit Variable Speed Drives $45/door Adjusting incentives to market conditions. $30/fixture Adjusting incentives to market conditions. $15/fixture Adjusting incentives to market conditions. Measure Eligibility & $60/HP of motor driven Residential Equipment Air Source Heat Pump $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive Residential Equipment Central Air Conditioner $50/ton for 15 to 15.9 SEER, $100/ton for SEER, $300/ton for 17 SEER and Residential Equipment Central Air Conditioner Application Submittal Deadline N/A Increase in Rebates are available for VSDs controlling 1-75 horsepower motors driving fans or centrifugal pumps for process applications. Rebate applications for central air conditioners installed after Oct. 1, 2018 but not SAVE tested before Dec. 31, 2018 can be submitted up to Sept. 30, 2019, if preenrolled by Dec. 31, However, will receive the

10 2018 Illinois Energy Efficiency Program Updates Residential Equipment Ductless Minisplit Air Conditioner $50/ton for 15 to 15.9 SEER, $100/ton for SEER, $300/ton for 17 SEER and Residential Equipment Ductless Minisplit Air Source Heat Pump $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive Residential Equipment Furnace Fans $50/unit Reduction in Residential Equipment Natural Gas Furnace $300/unit Reduction in 5

11 2018 Illinois Energy Efficiency Program Updates New Measures Equipment LED Replacement for Pin-based CFL Lamps New $5.00/lamp Lamps must be listed on the DLC QPL as "LED Replacement for Pin-Based CFL Lamps (UL Type A). UL Type B pin-based lamps do not qualify for prescriptive rebates but can be reviewed through the Custom option. Transitioning to a prescriptive incentive after a large quantity of custom projects reviewed through the Equipment and Commercial Energy Solutions programs. Existing Program/Measure Updates All Assessment Programs Insulation Measures Cap The insulation rebate payment cannot exceed 50 percent of the install cost (equipment + reasonable contractor labor only). All Programs Custom Projects and Project Installation Notification Submittal s based on first year savings and calculated according to improvements made. Electric improvements HVAC - $0.12/kWh saved Lighting - $0.10/kWh saved Process/Other - $0.08/kWh saved Gas improvements All improvement types - $2.00/therm saved Projects must be completed within six months of preapproval letter unless otherwise noted within preapproval letter. 1

12 2018 Illinois Energy Efficiency Program Updates All Residential and All Residential and Cap Prescriptive Programs Prescriptive Rebates All Residential and Prescriptive Programs Commercial Energy Solutions All Residential and Prescriptive Rebates Building Optimization Services Application Submittal Deadline cap For prescriptive rebates, the rebate payment cannot exceed 50 percent of the install cost (equipment + reasonable contractor labor only). N/A Total incentive cannot exceed 65 percent of total study and implementation cost All rebate applications, required documentation and invoices must be submitted by Dec. 31, HomeCheck Assessments Assessment Deadline N/A HomeCheck on-site energy assessment must be completed by Oct. 1, 2018 HomeCheck Assessment Measure Eligibility N/A Facility must be built before Jan. 1, HomeCheck Bonus Rebate Application Submittal Deadline N/A Upgrades must be installed and rebate applications must be submitted by Nov. 30, 2018, to be eligible for the bonus payment. Industrial Partners cap Total incentive cannot exceed 65 percent of eligible project costs. Equipment - Commercial Kitchen Equipment LED Refrigerated Case Lighting 5- and 6-foot doors $45/door Adjusting incentives to market conditions. 2

13 2018 Illinois Energy Efficiency Program Updates Air Source Heat Pumps $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and Central Air Conditioner Small < 65 MBtuh Ductless Minisplit Heat Pumps Electronically Commutated Furnace Fan Motors No HSPF incentive $50/ton for SEER, $100/ton for SEER, $300/ton for 17 SEER and $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive $50/unit Reduction in rebate Natural Gas Boiler $4/MBTU for AFUE, $5/MBTU for AFUE, $6.50/MBTU for.95 AFUE and Increase in rebate Natural Gas Furnace $300/unit Reduction in rebate Packaged Terminal Air Conditioners New Construction - EER 13.8 Packaged Terminal Air Conditioners Replacement units - EER 10.9 $35/ton Reduction in rebate $35/ton Reduction in rebate 3

14 2018 Illinois Energy Efficiency Program Updates Equipment - Lighting LED Hanging/Suspended Fixtures $30/fixture Adjusting incentives to market conditions Equipment Lighting Equipment - Lighting Equipment - Lighting Equipment VSD LED Refrigerated Case Lighting 5- and 6-foot doors LED Troffer and Wrap Fixture LED Troffer and Wrap Fixture Retrofit Variable Speed Drives $45/door Adjusting incentives to market conditions. $30/fixture Adjusting incentives to market conditions. $15/fixture Adjusting incentives to market conditions. Measure Eligibility & $60/HP of motor driven Residential Equipment Air Source Heat Pump $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive Residential Equipment Central Air Conditioner $50/ton for 15 to 15.9 SEER, $100/ton for SEER, $300/ton for 17 SEER and Residential Equipment Central Air Conditioner Application Submittal Deadline N/A Increase in Rebates are available for VSDs controlling 1-75 horsepower motors driving fans or centrifugal pumps for process applications. Rebate applications for central air conditioners installed after Oct. 1, 2018 but not SAVE tested before Dec. 31, 2018 can be submitted up to Sept. 30, 2019, if preenrolled by Dec. 31, However, will receive the

15 2018 Illinois Energy Efficiency Program Updates Residential Equipment Ductless Minisplit Air Conditioner $50/ton for 15 to 15.9 SEER, $100/ton for SEER, $300/ton for 17 SEER and Residential Equipment Ductless Minisplit Air Source Heat Pump $150/ton for SEER, $200/ton for SEER, $350/ton for 17 SEER and No HSPF incentive Residential Equipment Furnace Fans $50/unit Reduction in Residential Equipment Natural Gas Furnace $300/unit Reduction in 5

16 Custom HVAC Project Checklist Existing Information Total facility square footage Year building was constructed Existing Equipment Installation Year Building use and occupancy schedule Equipment operation hours List and/or drawings of heating, ventilation, and cooling equipment (type, age, quantity, capacity, sequence of operations, efficiency, model numbers) Existing control type (pneumatic, electro-pneumatic, combination of pneumatic and DDC, or DDC) Explanation of sequences of operation: Outdoor air, mixed air, supply air, and space temperature Space temperature setpoints, including occupied and unoccupied Hydronic or air pressure and temperature Data file containing measurements of energy efficiency variables before implementation (air pressure, temperature, flow rate, kw, etc.) Proposed Project Information Project description briefly summarize how energy is being saved Potential changes in building use or occupancy schedule List/drawings/spec sheets of proposed heating, cooling, and ventilation equipment (type, capacity, model numbers, sequence of operations, efficiency) Explanation of proposed sequences of operation: Outdoor air, mixed air, supply air, and space temperature Space temperature setpoints, including occupied and unoccupied Hydronic or air pressure and temperature Data file containing measurements of energy efficiency variables after implementation (air pressure, temperature, flow rate, kw, etc.) Cost Information Itemized material and labor project cost breakdown, as follows: Proposed project cost Baseline project cost lower efficiency alternative to the proposed project (Minimum cost to implement code-compliance) Documentation Needed Custom Preapproval Application (refer to example provided) Signed Project Completion Notice Write-up on any changes in project scope Project Invoices that break out labor and materials Trend data to verify the equipment is operating as planned (if applicable) THIS LIST IS NOT ALL-INCLUSIVE AND ADDITIONAL INFORMATION MAY BE REQUESTED AS NEEDED

17 CUSTOM SYSTEMS 2017 IOWA FOR YOUR BUSINESS PROJECT PREAPPROVAL REQUEST APPLICATION Instructions: This Preapproval Request Application is required for custom projects; no equipment can be purchased or any work initiated prior to receiving a formal preapproval letter. Please call MidAmerican Energy at or rebateapplications@midamerican.com with questions about application procedures, qualifying projects, incentives or verification procedures. Program preapproval is not required for prescriptive projects. SECTION 1 (REQUIRED) Name on account Customer Information address* *This address only will be used for communication regarding this rebate application. Your address never will be shared and you can unsubscribe at anytime Installation address City State ZIP Customer phone MidAmerican Energy Company account number (found on bill; first seven digits only) Contact name Contact title Contact primary phone number Contact secondary phone number Contact address* Sample Business name@samplebusiness.com 123 Main St Des Moines IA John Doe jdoe@samplebusiness.com President *This address only will be used for communication regarding this rebate application. Your address never will be shared and you can unsubscribe at anytime SECTION 2 (REQUIRED) My facility had an energy assessment in the following program (check if applicable): Industrial Multifamily Housing No assessment has been completed X Commercial Agribusiness Date assessment completed (month/year) 7/17 This project will be (check one): Part of a new facility Addition to an existing facility X Replacement for existing equipment New equipment Expected completion date (month/year) 12/17 This new equipment is for: X Replacement New installation Is existing equipment operational? X Yes No Page 1 of

18 SECTION 2 CONT. (REQUIRED) Equipment installed in what type of facility? (check one) Industrial MEC Use Only Commercial MEC Use Only Apparel manufacturing Apartment, halfway house MF Chemical manufacturing Condo MF Computer/electronic product manufacturing Convenience store/gasoline station CN Electrical equipment, appliance/component manufacturing Dealership RS Food/beverage/tobacco product manufacturing Financial institution OF Furniture and related product manufacturing Grocery store and supermarket GR Large refrigerated warehouse Healthcare (outpatient) HC Leather and allied product manufacturing Healthcare (inpatient) HS Machinery manufacturing Health club/exercise facility FC Nonmetallic mineral product manufacturing Library ED Oil and gas extraction; mining Lodging - hotel HO Paper manufacturing; printing and related support activities Lodging - motel MO Personal and laundry services Mixed use O Petroleum and coal products manufacturing Office small OS Plastics and rubber products manufacturing Office - government - small OS Primary metal/fabricated metal product manufacturing Office public order and safety small OS Textile mill and textile product mill X Office large OL Transportation equipment manufacturing Office government - large OL Utility Office - public order and safety - large OL Warehouse and storage WH Pharmacy and drug store RT Warehouse - large refrigerated Public assembly HY Wood product manufacturing Religious worship/church RL Miscellaneous manufacturing Restaurant - fast food RSF Other O Restaurant full service RSS Retail - small RS Agriculture MEC Use Only Retail - large RL Corn farming AG Retail department store RL Dairy cattle and milk production DF Retirement home, nursing home, assisted living MF Hog facility HF School - elementary SE Soybean farming AG School - jr. high SJH All other animal production AF School - high school SJH All other miscellaneous crop farming AG School - college, university and professional school ED School - lodging (school/dorm) MF Service RS Truck stop CV Page 2 of

19 Proposed Energy Efficiency Project: Describe equipment/system to be replaced/upgraded and attach documentation (i.e., replace 4-lamp T-12 fluorescent fixtures with LED fixtures). Written description Remove the following existing equipment: Two (2) 80% efficient gas fired hot water boilers Two (2) based mounted hot water pumps Boiler flues, intake ducting, electrical hookups, piping and pipe insulation Existing controls Replace with: Three (3) 87% efficient gas fired hot water boilers Three (3) B&G 1 HP boiler pumps Two (2) B&G 20 HP distribution pumps with variable speed drives (VSD) Individual boiler flues, intakes, electrical hookups, piping and pipe insulation Pipe new system in a primary secondary configuration New Controls: o Master control panel connected to existing BACnet master controller o Sequence and control boilers according to manufacturer s recommendations o Include hot water reset control; variable speed control signal for hot water pumps; point monitoring of hot water supply and return temperatures; outdoor air temperatures; start/stop condition of all newly provided equipment If you provide a detailed project quote or proposal that provides this information, it does not need to be included here. Custom Equipment/Project Information for Preapproval (Complete if not included in written description or attached proposal. Use additional sheets if necessary.) Project Data Existing Less-Efficient Alternative Proposed High-Efficiency Option Equipment type Manufacturer/model Efficiency Units: kw, MBtuh, tons, HP, etc. Quantity Equipment Hours of Operation: (circle a.m. or p.m.) Monday - Friday 12 a.m./p.m. to 12 a.m./p.m. Saturday 12 a.m./p.m. to 12 a.m./p.m. Sunday 12 a.m./p.m. to 12 a.m./p.m. Additional data Hot Water Boilers Hot Water Boilers Boilers & More / B1234 Boiler King / BK999 TE 80% TE 87% 4,000 MBH input nat. gas 3,000 MBH input nat. gas two - installed 1990 three Additional data Equipment/materials Installation/labor Sales tax Freight/shipping Other Total: Project Cost Details (Complete if not included in written description or attached proposal. Use additional sheets if necessary.) $210,500 $150,000 $0 tax exempt $2,000 $3,000 flue roofing $2,000 sprinkler relocating $367,500 Disclaimer MidAmerican Energy Company does not guarantee that installation and operation of high-efficiency equipment will result in reduced usage or in cost savings. MidAmerican Energy Company makes no warranties, expressed or implied, with respect to any equipment purchased or installed, including, but not limited to, any warranty of merchantability or fitness for a particular purpose. In no event shall MidAmerican Energy Company be held liable for any incidental or consequential damages or injuries resulting from defective equipment or installation. MidAmerican Energy Company reserves the right to cancel or change these programs at any time. MidAmerican Energy Company s acceptance of this application does not guarantee payment of REMEMBER TO SIGN THE NEXT PAGE Page 3 of

20 Specific Terms and Conditions Participants must be commercial or industrial business customers with facilities located in MidAmerican Energy Company s Iowa service territory. MidAmerican Energy Company must provide the primary electricity and/or natural gas to the equipment at the facility for which the rebate is being paid. Transportation gas customers with daily metering are ineligible for natural gas incentives. However, customers with monthly metering under the Monthly Metered Transportation Service natural gas tariff are eligible for energy incentives. All custom systems must specify a less-efficient, commercially available alternative for baseline comparison purposes. Custom projects require preapproval by MidAmerican Energy Company prior to purchase and installation of equipment or systems. Projects must be completed within 12 months of preapproval. All custom projects must be deemed cost-effective by MidAmerican Energy Company in order to be eligible for a Eligibility is based on the qualifying equipment or system s energy savings, peak demand savings, usage profile and incremental cost. Equipment must be new. Rebates will equal 25 percent of the incremental cost of the project or an amount which will buy down the payback period to 25 percent of the project s useful life, whichever is greater, not to exceed 60 percent of the eligible project cost. You will receive the lesser of the calculated custom rebate or 60 percent of the eligible project cost, and the incentive may not reduce the simple payback period for the project to less than two years. Allow 4 6 weeks for analysis to be completed and for preapproval to be granted/denied. General Terms and Conditions Important: Before completing and signing this form, please read the General Terms and Conditions located in the 2017 Iowa For Your Business rebate booklet or at Customer Agreement (Signature required before application is processed.) I, the undersigned, agree that to the best of my knowledge, the energy efficiency measure listed herein is representative of the project we expect to implement. I understand that incentive amounts are determined from the project-specific data submitted with this application and provided during the review process, and that incentives for similar measures may vary from program participant to program participant based upon specific costs and savings. s awarded are subject to available program funds. MidAmerican Energy Company may conduct a pre- and/or post-installation inspection to verify savings. I am authorized by the customer organization listed to submit this summary on its behalf. My signature indicates consent to and agreement with all program terms and conditions, certifies that all information on this application is correct, and that all the listed new equipment has not been purchased and/or installed at the indicated location. Customer signature Date 10/15/17 Installing contractor company name Heating Solutions, Inc Contractor/Trade Ally Information (engineer; architect; mechanical/electrical contractor; dealer; etc.) Installing contractor contact name Company address City State ZIP Contact phone Project desired start date Joe Smith 456 1st Ave Des Moines IA Contact jsmith@heatingsolutions.com Expected completion date 11/10/ /12/2017 Contractor/Trade Ally Agreement I certify that all equipment and installation information provided on this application is correct and accurate. Specifier/contractor signature Date 10/16/2017 Before you submit your form: X Fill out this form completely. X Include documentation listed in the instructions. X Sign the Customer Agreement section. Send completed forms to: Mail: MidAmerican Energy Company P.O. Box Des Moines, IA Fax: Call: with questions about the program rebateapplications@midamerican.com For more information call or go to Page 4 of

21 CUSTOM SYSTEMS 2017 IOWA FOR YOUR BUSINESS PROJECT PREAPPROVAL REQUEST APPLICATION Instructions: This Preapproval Request Application is required for custom projects; no equipment can be purchased or any work initiated prior to receiving a formal preapproval letter. Please call MidAmerican Energy at or rebateapplications@midamerican.com with questions about application procedures, qualifying projects, incentives or verification procedures. Program preapproval is not required for prescriptive projects. SECTION 1 (REQUIRED) Name on account Customer Information address* *This address only will be used for communication regarding this rebate application. Your address never will be shared and you can unsubscribe at anytime Installation address City State ZIP Customer phone Contact name MidAmerican Energy Company account number (found on bill; first seven digits only) Contact title Contact primary phone number Contact secondary phone number Contact address* Sample Business name@samplebusiness.com 123 Main St Des Moines IA John Doe jdoe@samplebusiness.com President *This address only will be used for communication regarding this rebate application. Your address never will be shared and you can unsubscribe at anytime SECTION 2 (REQUIRED) My facility had an energy assessment in the following program (check if applicable): Industrial Multifamily Housing No assessment has been completed X Commercial Agribusiness Date assessment completed (month/year) 7/17 This project will be (check one): Part of a new facility Addition to an existing facility X Replacement for existing equipment New equipment Expected completion date (month/year) 12/17 This new equipment is for: X Replacement New installation Is existing equipment operational? X Yes No Additional Documentation: - Project Scope - Estimate or Quote - Spec Sheets for LED equipment - DLC listing or LM-79 sheets Page 1 of

22 SECTION 2 CONT. (REQUIRED) Equipment installed in what type of facility? (check one) Industrial MEC Use Only Commercial MEC Use Only Apparel manufacturing Apartment, halfway house MF Chemical manufacturing Condo MF Computer/electronic product manufacturing Convenience store/gasoline station CN Electrical equipment, appliance/component manufacturing Dealership RS Food/beverage/tobacco product manufacturing Financial institution OF Furniture and related product manufacturing Grocery store and supermarket GR Large refrigerated warehouse Healthcare (outpatient) HC Leather and allied product manufacturing Healthcare (inpatient) HS Machinery manufacturing Health club/exercise facility FC Nonmetallic mineral product manufacturing Library ED Oil and gas extraction; mining Lodging - hotel HO Paper manufacturing; printing and related support activities Lodging - motel MO Personal and laundry services Mixed use O Petroleum and coal products manufacturing Office small OS Plastics and rubber products manufacturing Office - government - small OS Primary metal/fabricated metal product manufacturing Office public order and safety small OS Textile mill and textile product mill X Office large OL Transportation equipment manufacturing Office government - large OL Utility Office - public order and safety - large OL Warehouse and storage WH Pharmacy and drug store RT Warehouse - large refrigerated Public assembly HY Wood product manufacturing Religious worship/church RL Miscellaneous manufacturing Restaurant - fast food RSF Other O Restaurant full service RSS Retail - small RS Agriculture MEC Use Only Retail - large RL Corn farming AG Retail department store RL Dairy cattle and milk production DF Retirement home, nursing home, assisted living MF Hog facility HF School - elementary SE Soybean farming AG School - jr. high SJH All other animal production AF School - high school SJH All other miscellaneous crop farming AG School - college, university and professional school ED School - lodging (school/dorm) MF Service RS Truck stop CV Page 2 of

23 Proposed Energy Efficiency Project: Describe equipment/system to be replaced/upgraded and attach documentation (i.e., replace 4-lamp T-12 fluorescent fixtures with LED fixtures). Written description Replace 26 8 ft T8 lamps w/ 8 ft LED lamps Replace 3 2 ft U-bend lamps w/ 9 2 ft LED lamps Replace 8 4 ft 6 lamp T-5 high bay fixtures w/ 8 4 ft LED high bay fixtures If you provide a detailed project quote or proposal that provides this information, it does not need to be included here. Custom Equipment/Project Information for Preapproval (Complete if not included in written description or attached proposal. Use additional sheets if necessary.) Project Data Existing Less-Efficient Alternative Proposed High-Efficiency Option Equipment type Manufacturer/model T8-8 ft/t8 U-bend/T5 HB LED Efficiency Units: kw, MBtuh, tons, HP, etc. Quantity 59 W / 32 W / 324 W 25 W / 17 W / 100 W 26 / 3 / 8 26 / 9 / 8 Equipment Hours of Operation: (circle a.m. or p.m.) Monday - Friday 4 a.m./p.m. to 6:30 a.m./p.m. Saturday - a.m./p.m. to - a.m./p.m. Sunday - a.m./p.m. to - a.m./p.m. Additional data Additional data Equipment/materials Installation/labor Sales tax Freight/shipping Project Cost Details (Complete if not included in written description or attached proposal. Use additional sheets if necessary.) $3,247 $1,428 $0 Other Total: $4,675 Disclaimer MidAmerican Energy Company does not guarantee that installation and operation of high-efficiency equipment will result in reduced usage or in cost savings. MidAmerican Energy Company makes no warranties, expressed or implied, with respect to any equipment purchased or installed, including, but not limited to, any warranty of merchantability or fitness for a particular purpose. In no event shall MidAmerican Energy Company be held liable for any incidental or consequential damages or injuries resulting from defective equipment or installation. MidAmerican Energy Company reserves the right to cancel or change these programs at any time. MidAmerican Energy Company s acceptance of this application does not guarantee payment of REMEMBER TO SIGN THE NEXT PAGE Page 3 of

24 Specific Terms and Conditions Participants must be commercial or industrial business customers with facilities located in MidAmerican Energy Company s Iowa service territory. MidAmerican Energy Company must provide the primary electricity and/or natural gas to the equipment at the facility for which the rebate is being paid. Transportation gas customers with daily metering are ineligible for natural gas incentives. However, customers with monthly metering under the Monthly Metered Transportation Service natural gas tariff are eligible for energy incentives. All custom systems must specify a less-efficient, commercially available alternative for baseline comparison purposes. Custom projects require preapproval by MidAmerican Energy Company prior to purchase and installation of equipment or systems. Projects must be completed within 12 months of preapproval. All custom projects must be deemed cost-effective by MidAmerican Energy Company in order to be eligible for a Eligibility is based on the qualifying equipment or system s energy savings, peak demand savings, usage profile and incremental cost. Equipment must be new. Rebates will equal 25 percent of the incremental cost of the project or an amount which will buy down the payback period to 25 percent of the project s useful life, whichever is greater, not to exceed 60 percent of the eligible project cost. You will receive the lesser of the calculated custom rebate or 60 percent of the eligible project cost, and the incentive may not reduce the simple payback period for the project to less than two years. Allow 4 6 weeks for analysis to be completed and for preapproval to be granted/denied. General Terms and Conditions Important: Before completing and signing this form, please read the General Terms and Conditions located in the 2017 Iowa For Your Business rebate booklet or at Customer Agreement (Signature required before application is processed.) I, the undersigned, agree that to the best of my knowledge, the energy efficiency measure listed herein is representative of the project we expect to implement. I understand that incentive amounts are determined from the project-specific data submitted with this application and provided during the review process, and that incentives for similar measures may vary from program participant to program participant based upon specific costs and savings. s awarded are subject to available program funds. MidAmerican Energy Company may conduct a pre- and/or post-installation inspection to verify savings. I am authorized by the customer organization listed to submit this summary on its behalf. My signature indicates consent to and agreement with all program terms and conditions, certifies that all information on this application is correct, and that all the listed new equipment has not been purchased and/or installed at the indicated location. Customer signature Date 10/15/17 Installing contractor company name Lighting Solutions, Inc Contractor/Trade Ally Information (engineer; architect; mechanical/electrical contractor; dealer; etc.) Installing contractor contact name Company address City State ZIP Contact phone Project desired start date Joe Smith 456 1st Ave Des Moines IA Contact jsmith@lightingsolutions.com Expected completion date 11/10/ /12/2017 Contractor/Trade Ally Agreement I certify that all equipment and installation information provided on this application is correct and accurate. Specifier/contractor contractor signature Date 10/16/2017 Before you submit your form: X Fill out this form completely. X Include documentation listed in the instructions. X Sign the Customer Agreement section. Send completed forms to: Mail: MidAmerican Energy Company P.O. Box Des Moines, IA Fax: Call: with questions about the program rebateapplications@midamerican.com For more information call or go to Page 4 of

25 CUSTOM SYSTEMS 2017 IOWA FOR YOUR BUSINESS PROJECT PREAPPROVAL REQUEST APPLICATION Instructions: This Preapproval Request Application is required for custom projects; no equipment can be purchased or any work initiated prior to receiving a formal preapproval letter. Please call MidAmerican Energy at or rebateapplications@midamerican.com with questions about application procedures, qualifying projects, incentives or verification procedures. Program preapproval is not required for prescriptive projects. SECTION 1 (REQUIRED) Name on account Sample Business Customer Information address* *This address only will be used for communication regarding this rebate application. Your address never will be shared and you can unsubscribe at anytime Installation address City State ZIP Customer phone Contact name Contact primary phone number Contact address* MidAmerican Energy Company account number (found on bill; first seven digits only) Contact title name@samplebusiness.com 123 Main Street Des Moines IA John Doe President Contact secondary phone number jdoe@samplebusiness.com *This address only will be used for communication regarding this rebate application. Your address never will be shared and you can unsubscribe at anytime SECTION 2 (REQUIRED) My facility had an energy assessment in the following program (check if applicable): q Industrial q Multifamily Housing q No assessment has been completed q Commercial q Agribusiness Date assessment completed (month/year) 7/17 This project will be (check one): q Part of a new facility q Addition to an existing facility q Replacement for existing equipment q New equipment Expected completion date (month/year) 12/17 This new equipment is for: q Replacement q New installation Is existing equipment operational? q Yes q No Page 1 of

26 SECTION 2 CONT. (REQUIRED) Equipment installed in what type of facility? (check one) Industrial MEC Use Only Commercial MEC Use Only q Apparel manufacturing q Apartment, halfway house MF q Chemical manufacturing q Condo MF q Computer/electronic product manufacturing q Convenience store/gasoline station CN q Electrical equipment, appliance/component manufacturing q Dealership RS q Food/beverage/tobacco product manufacturing q Financial institution OF q Furniture and related product manufacturing q Grocery store and supermarket GR q Large refrigerated warehouse q Healthcare (outpatient) HC q Leather and allied product manufacturing q Healthcare (inpatient) HS q Machinery manufacturing q Health club/exercise facility FC q Nonmetallic mineral product manufacturing q Library ED q Oil and gas extraction; mining q Lodging - hotel HO q Paper manufacturing; printing and related support activities q Lodging - motel MO q Personal and laundry services q Mixed use O q Petroleum and coal products manufacturing q Office small OS q Plastics and rubber products manufacturing q Office - government - small OS q Primary metal/fabricated metal product manufacturing q Office public order and safety small OS q Textile mill and textile product mill q Office large OL q Transportation equipment manufacturing q Office government - large OL q Utility q Office - public order and safety - large OL q Warehouse and storage WH q Pharmacy and drug store RT q Warehouse - large refrigerated q Public assembly HY q Wood product manufacturing q Religious worship/church RL q Miscellaneous manufacturing q Restaurant - fast food RSF q Other O q Restaurant full service RSS q Retail - small RS Agriculture MEC Use Only q Retail - large RL q Corn farming AG q Retail department store RL q Dairy cattle and milk production DF q Retirement home, nursing home, assisted living MF q Hog facility HF q School - elementary SE q Soybean farming AG q School - jr. high SJH q All other animal production AF q School - high school SJH q All other miscellaneous crop farming AG q School - college, university and professional school ED q School - lodging (school/dorm) MF q Service RS q Truck stop CV Page 2 of

27 Proposed Energy Efficiency Project: Describe equipment/system to be replaced/upgraded and attach documentation (i.e., replace 4-lamp T-12 fluorescent fixtures with LED fixtures). Written description A wash line pump circulates water from a tank to spray heads to clean a product. Control type: The pump is controlled by a two-way throttling valve. Current operation sequence: The pump discharges water at 50 psig, the discharged water is throttled to match the end-use pressure requirement of 10 psig. Proposed operation sequence: Install a VSD on the pump and manually set the VSD speed to meet the end-use pressure requirement of 10 psig. Custom Equipment/Project Information for Preapproval (Complete if not included in written description or attached proposal. Use additional sheets if necessary.) Project Data Existing Less-Efficient Alternative Proposed High-Efficiency Option Equipment type Manufacturer/model Efficiency Units: kw, MBtuh, tons, HP, etc. Quantity Equipment Hours of Operation: (circle a.m. or p.m.) Monday - Friday 4:30 a.m./p.m. to 11:00 a.m./p.m. Saturday 4:30 a.m./p.m. to 11:00 a.m./p.m. Sunday 4:30 a.m./p.m. to 11:00 a.m./p.m. Additional data Additional data Controlled by two-way valve Dayton S % 20 HP 1 Load factor - 80% Controlled by VSD Equipment/materials Installation/labor Sales tax Freight/shipping Project Cost Details (Complete if not included in written description or attached proposal. Use additional sheets if necessary.) $5000 $1500 $500 Other Total: $7000 Disclaimer MidAmerican Energy Company does not guarantee that installation and operation of high-efficiency equipment will result in reduced usage or in cost savings. MidAmerican Energy Company makes no warranties, expressed or implied, with respect to any equipment purchased or installed, including, but not limited to, any warranty of merchantability or fitness for a particular purpose. In no event shall MidAmerican Energy Company be held liable for any incidental or consequential damages or injuries resulting from defective equipment or installation. MidAmerican Energy Company reserves the right to cancel or change these programs at any time. MidAmerican Energy Company s acceptance of this application does not guarantee payment of REMEMBER TO SIGN THE NEXT PAGE Page 3 of

28 Specific Terms and Conditions nparticipants must be commercial or industrial business customers with facilities located in MidAmerican Energy Company s Iowa service territory. nmidamerican Energy Company must provide the primary electricity and/or natural gas to the equipment at the facility for which the rebate is being paid. ntransportation gas customers with daily metering are ineligible for natural gas incentives. However, customers with monthly metering under the Monthly Metered Transportation Service natural gas tariff are eligible for energy incentives. nall custom systems must specify a less-efficient, commercially available alternative for baseline comparison purposes. ncustom projects require preapproval by MidAmerican Energy Company prior to purchase and installation of equipment or systems. Projects must be completed within 12 months of preapproval. All custom projects must be deemed cost-effective by MidAmerican Energy Company in order to be eligible for a neligibility is based on the qualifying equipment or system s energy savings, peak demand savings, usage profile and incremental cost. nequipment must be new. nrebates will equal 25 percent of the incremental cost of the project or an amount which will buy down the payback period to 25 percent of the project s useful life, whichever is greater, not to exceed 60 percent of the eligible project cost. nyou will receive the lesser of the calculated custom rebate or 60 percent of the eligible project cost, and the incentive may not reduce the simple payback period for the project to less than two years. nallow 4 6 weeks for analysis to be completed and for preapproval to be granted/denied. General Terms and Conditions Important: Before completing and signing this form, please read the General Terms and Conditions located in the 2017 Iowa For Your Business rebate booklet or at Customer Agreement (Signature required before application is processed.) I, the undersigned, agree that to the best of my knowledge, the energy efficiency measure listed herein is representative of the project we expect to implement. I understand that incentive amounts are determined from the project-specific data submitted with this application and provided during the review process, and that incentives for similar measures may vary from program participant to program participant based upon specific costs and savings. s awarded are subject to available program funds. MidAmerican Energy Company may conduct a pre- and/or post-installation inspection to verify savings. I am authorized by the customer organization listed to submit this summary on its behalf. My signature indicates consent to and agreement with all program terms and conditions, certifies that all information on this application is correct, and that all the listed new equipment has not been purchased and/or installed at the indicated location. John Doe Customer signature Installing contractor company name Heating Solutions Contractor/Trade Ally Information (engineer; architect; mechanical/electrical contractor; dealer; etc.) Installing contractor contact name Company address City State ZIP Contact phone Project desired start date Joe Smith Contact Expected completion date Contractor/Trade Ally Agreement I certify that all equipment and installation information provided on this application is correct and accurate. Date 10/15/ st Avenue Des Moines IA jdoe@samplebusiness.com 11/10/ /12/2017 Joe Smith Specifier/contractor signature Before you submit your form: o ofill out this form completely. o oinclude documentation listed in the instructions. o osign the Customer Agreement section. Date 10/16/2017 Send completed forms to: Mail: MidAmerican Energy Company P.O. Box Des Moines, IA Fax: Call: with questions about the program rebateapplications@midamerican.com For more information call or go to Page 4 of