International Accreditation Service, Inc. CERTIFICATE OF ACCREDITATION This is to signify that

Transcription

1 CERTIFICATE OF ACCREDITATION This is to signify that APPLIED TESTING & GEOSCIENCES, LLC 401 EAST FOURTH STREET, BUILDING 12B BRIDGEPORT, PENNSYLVANIA Testing Laboratory TL-292 has demonstrated compliance with ANS/ISO/IEC Standard 17025:2005, General criteria for the competence of testing and calibration laboratories, and has been accredited, commencing July 1, 2007, for the test methods listed in the approved scope of accreditation. Patrick V. McCullen C. P. Ramani, P.E. Vice (see attached scope of accreditation for fields of testing and accredited test methods) information, or contact IAS directly at (562) Print Date: 07/30/2007 Page 1 of 3

2 Applied Testing & Geosciences, LLC TL-292 Applied Testing & Geosciences, LLC Craig J. Joss 401 E Fourth St, Bldg 12B Technical Manager Bridgeport, PA (610) Testing and Inspection under ASTM E 329 FIELDS OF TESTING Concrete Masonry ACCREDITED TEST METHODS ASTM Standards C 29, C 31, C 39, C 40, C 42, C 70, C 78, C 88, C 114, C 117, C 127, C 128, C 131, C 136, C 138, C 142, C 143, C 157, C 172, C 173, C 174, C 192, C 231, C 232, C 293, C 403, C 457, C 469, C 495, C 496/496M, C 511, C 512, C 531, C 535, C 566, C 567, C 666, C 702, C 803, C 805, C 823, C 873, C 900, C 1040, C 1064, C 1084, C 1152, C 1218 and C 1399 ASTM Standards C 25, C 50, C 67, C 109, C 110, C 114, C 140, C 157, C 183, C 184, C 185, C 187, C 188, C 191, C 204, C 207, C 266, C 270, C 305, C 348, C 349, C 359, C 404, C 476, C 780, C 1006, C 1019, C 1314, C 1437, E 518 and E 519 Asphalt ASTM Standards C 128, D 5, D 70, D 127, D 1074, D 1075, D 2041, D 2950, D 3142 and D 5361 Soils and Rock ASTM Standards D 422, D 698, D 854, D 1140, D 1557, D 1883, D 2166, D 2434, D 2216, D 2435, D 2487, D 2850, D 2922, D 2936, D 2974, D 3038, D 3080, D 4250, D 4318, D 4525, D 4630, D 4767, D 4791, D 4972, D 5084, D 5268 and D 6951 Steel ASTM Standards E 8, E 9, E 18, E 164, E 165, E 543, E 1417, E 1444 and F 606 July 1, 2007 information, or contact IAS directly at (562) Print Date: 07/30/2007 Page 2 of 3

3 FIELDS OF TESTING Applied Testing & Geosciences, LLC TL-292 ACCREDITED TEST METHODS Physical Testing ASTM Standards A 370, E 8, E 72, E 330, E 331, E 564, E 605, E 661, E 736, E1155, E1190, E 1803, F 1869 ; ICC-ES Acceptance Criteria AC04, AC 17, AC 43(only 3.2.1), AC 170, AC 210(Only Sections 4.3 and 4.6), AC 213(Only Section 4.4) and AC 323 Fasteners ASTM E 488, E 1512 (only Section ); ICC ES Acceptance Criteria AC 01 (only tension and Shear tests), AC 58 (Only section ), AC 13, AC 70, AC 106, AC 116, AC 118 and AC 193 (Only Table 4.1 except test numbers 8 and 15 July 1, 2007 information, or contact IAS directly at (562) Print Date: 07/30/2007 Page 3 of 3

4 CERTIFICATE OF ACCREDITATION This is to signify that APPLIED TESTING & GEOSCIENCES, LLC 401 EAST FOURTH STREET, BUILDING 12-B BRIDGEPORT, PENNSYLVANIA Inspection Agency AA-672 Type A (Third-Party) Body (Revised January 10, 2008) has demonstrated compliance with ISO/IEC Standard 17020, General criteria for the operation of various types of bodies performing inspection, and has been accredited, commencing August 24, 2007, to provide inspection services in the approved scope of accreditation. Patrick V. McCullen C. P. Ramani, P.E. Vice (see attached scope of accreditation for field(s) of inspection, including type, range, methods or procedures) information, or contact IAS directly at (562) Print Date: 01/18/2008 Page 1 of 3

5 Applied Testing & Geosciences, LLC AA-672 Type A (Third-Party) Body (Revised: January 10, 2008) Applied Testing & Geosciences, LLC Craig J. Joss 401 E. Fourth St., Bldg. 12-B Technical Manager Bridgeport, PA FIELDS OF Panel walls, Skylights, Exterior Doors and windows, Roofing Products, Shutters and Structural Components TYPE AND RANGE OF In-Plant INSPECTION METHODS AND PROCEDURES Follow-up Service Procedure and Appendix 2 of the Applied Procedures per ICC ES Acceptance Criteria AC04, AC 17, AC 210, AC 213, AC 323 and AC 340 Joist Hangers and Similar Devices In-Plant Follow-up Service Procedure and Appendix 2 of the Applied Procedures per ICC ES Acceptance Criteria AC 13 Nails, Spikes, Tapping Screw Fasteners, Mechanical Anchors and Adhesive Anchors In-Plant Follow-up Service Procedure and Appendix 2 of the Applied Procedures per ICC ES Acceptance Criteria AC 01, AC 58, AC 70, AC 106, AC 116, AC 118, AC 193 and AC 308 August 24, 2007 information, or contact IAS directly at (562) Print Date: 01/18/2008 Page 2 of 3

6 FIELDS OF Applied Testing & Geosciences, LLC AA-672 Type A (Third-Party) Body (Revised: January 10, 2008) TYPE AND RANGE OF INSPECTION METHODS AND PROCEDURES Structural Steel In-Plant Follow-up Service Procedure and Appendix 2 of the Applied Procedures per ICC ES Acceptance Criteria AC 43, AC 170 and AC 300; and IAS Accreditation Criteria AC 172 Deck Board and Handrail Systems In-Plant Follow-up Service Procedure and Appendix 2 of the Applied Procedures per ICC ES Acceptance Criteria AC 174 Concrete with Synthetic Fiber In-Plant/ In-Situ Follow-up Service Procedure and Appendix 2 of the Applied Procedures per ICC ES Acceptance Criteria AC 32. Manufacturing in fields specified above Qualification and Follow-up Inplant ICC-ES Acceptance Criteria AC304 August 24, 2007 information, or contact IAS directly at (562) Print Date: 01/18/2008 Page 3 of 3