The product is 100% complete and prepared for shipment.
|
|
- Cathleen Hines
- 6 years ago
- Views:
Transcription
1 LAND RIG 650 t
2 GENERAL INFORMATION To whom it may concern, Discovery Drilling Equipment offers Swing Lift Substructure (SL 650) and Cantilever Mast (CM 650) of 650t load capacity. The product is 100% complete and prepared for shipment. The product was completed on the 30 th of October and is available for the first buyer. The product contains mast, substructure, crown block, crown frame, raising line equalizer and dead line anchor. All the parts are manufactured on the Discovery Drilling Equipment (Ukraine) facility in Stryi and come fully API monogrammed. The product quality is guaranteed by complete compliance with various international standards including API 4F, API 8C, ISO9001, etc. The product was tested by all relating measurement of nondestructive control. Moreover, 100% of critical welds were tested by ultrasonic and MPC. The critical parts are made of the top-quality steel from major EU steel manufacturers. Please see the specification, pricing, pictures and drawings of the product below. More technical details as well as more pictures and standard warranty you may find at our web: Discovery Drilling Equipment has extensive experience in drilling rig manufacturing. For many years DDE rigs are successfully operated by major drilling companies and contractors like BP, Shell, Weatherford, etc on 5 continents. More information about our clients and projects you may find at Any prospective visitors are welcome to visit us at Stryi, Ukraine, we will be happy to arrange the car transfer and provide you with any logistic support needed. Please do not hesitate to contact us in case of any further questions or clarifications. Sincerely, Ralph John Vice President - Global Business Development DISCOVERY INDUSTRIAL SERVICES Cell: (UAE Mobile) sales@discoveryde.com 1
3 RIG SPECIFICATION Section 1 - CM 650 Mast 1,1 Mast Assembly Manufacturer: Model Number: Design Compliance Ambient temperature design Type DDE CM650 API 4F, 3rd Edition -40 C thru +55 o C Open face, Cantilever 1,2 Static Hook Load Capacity, Tons (Metric Tons) 10 lines 507 (460) 12 lines 584 (530) 14 lines 650 (590) 1,3 General Dimensions, feet (mm) Clear working height Clear width at base Dimensions at Crown 9 X 7.5 (2400 X 2400) 1,4 Pipe handling Range II, Triples Racking Capacity - Drill Pipe, feet (meters) 5" (127 mm) Drill Pipe (8846) 5 1/2" (140 mm) Drill Pipe (7485) 5 7/8" (149 mm) Drill Pipe (7485) 6 5/8" (168 mm) Drill Pipe (5671) Racking Capacity - Drill Collars, stands 12 Racking board adjustable range, feet (mm) 82 to 87 (25000 to 26520) Racking board fingers One size only furnished, client to specify 1,5 Belly Board Distance from Rig Floor, feet (mm) 45 (13716) 1,6 Tong counter weights Quantity 4 (2) Manual Tongs (1) Spinning Wrench (1) Spare 1,7 Ladder Floor to Crown - Drillers side Rung or Cage type Client to specify 1,8 Crown Block Manufacturer: DDE Model Number: CB Sheave Design Compliance API 8C Configuration Skewed Capacity, Tons/Metric Tons 780 (708) Drilling Line Size, inches/mm 1,5 (38) Fastline Sheave, inches/mm 60 (1524) Cluster Sheaves, quantity 7 Size, inches/mm 60 (1524) 2
4 RIG SPECIFICATION 1,9 Crown Frame Manufacturer: DDE Frame Design Compliance API 4F, 3rd edition Bumper blocks Quantity 2 Size, inches (mm) 10 X 10 (254 X 254) Certified Pad Eyes Certified counter weight Pad Eyes Quantity 4 SWL, lbs (kgs) 5000 (2268) Certified Tugger Pad Eyes Quantity 2 SWL, lbs (kgs) (5443) Certified Man Rider Pad Eye Quantity 1 SWL, lbs (kgs) 1000 (454) Certified Coreline Sheave Pad Eye, number Quantity 1 SWL, Tons (Metric Tons) 25 (23) Certified Block Hanging Pad Eye, number Quantity 1 SWL, Tons (Metric Tons) 40 (36) 1,10 Raising Line equalizer Manufacturer: DDE Model Number: RLE 375 Design Compliance API 8C Capacity, Tons/Metric Tons 375 (340) 1,11 Deadline Anchor Manufacturer DDE Model DLA115 Design Compliance API 8C Drum diameter, inches/mm 33 (838) Standard clamp assembly, inches/mm 1,5 (38) Mounting Floor or leg Deadline load rating, Tons/Metric Tons 63 (28) Load Cell Type Compression, by Client 3
5 RIG SPECIFICATION Section 2 - SL 650 Substructure 2,1 Substructure Assembly Manufacturer Model Design Compliance Type DDE SL650 API 4F, 3rd Edition Parallelogram type, slingshot Capacities, Tons (Metric Tons) Casing capacity 650 (590) Setback capacity 430 (390) Simultaneous capacity 1080 (980) General Dimensions, Feet (mm) Floor Height 36 (11000) Clear height under rotary beams 30 (9130) Drill Floor Dimensions Length 39 (12000) Width 40 (12100) Top Plate Girder Box Dimensions Length 39 (12000) Width 8 (2380) Hieght 4 (1350) Bottom Plate Girder Box Dimensions Length 70 (21300) Width 8 (2380) Hieght 7 (2000) Designed for retro fit to: Rolling systems Walking systems Skidding systems Base Dimensions Length 70 (21300) Width 40 (12100) BOP Handling Beams Quantity 2 Rating, each, Tons (Metric Tons) 50 (45) 4
6 RIG SPECIFICATION Section 3 - Documentation and Manuals 3,1 Documentation DDE Standard Data Book CM 650 and SL 650 Section 1 Equipment Name Purchase Order Sales Order Serial Number Part Numbers Purchaser Section 2 DDE Certificate of Conformance Section 3 DDE Certificate of Compliance Section 4 Material Test Reports Section 5 Non Destructive Testing Reports Section 6 Material traceability as per API 4F. 3,2 Operations and Maintenance Manuals Model CM 650 and SL 650 No. of Hard copies 3 No. of Electronic copies 1 Contents Operation Manuals Maintenance Manuals Recommended spares list Manufacturer's Data books Manufacturing testing documents Manufacturing Commissioning documents Section 4 - Coating System 4,1 Coating System Total Coating Area CM 650 and SL 650 Procedure DDE Standard Sandblast SA 2 1/2 Primer 160 Microns minimum Topcoat 60 Microns minimum Colors Client specified RAL codes 5
7 RIG SPECIFICATION Section 5 - Optional Items 5,1 Racking Board Winch Price $ Type Air Manufacturer: Ingersol Rand, or similar Maximum pull, lbs (kgs) 1500 (680) Line size, inches (mm) 0,375 (10) 5,2 Escape and fall arrest equipment Price $2 160 Emergency Escape Line, type Geronimo Line size, inches (mm) 0,5625 (14) Derrickman Fall Arrest, type DBI Sala Line size, inches (mm) 0,375 (10) 5,3 Mast Raising Lines Price $ Manufacturer: Various Line size, inches/mm 2,75 (70) Type 6 X 36 IWRC, EIPS Nominal Strength, Tons/Metric Tons 368 (334) 5,4 Casing Stabbing Board Price $ Manufacturer: Discovery Drilling Equipment Model Number: CSB Adjustable range, feet (mm) 25 to 40 (7600 to 12000) 5,5 Hydraulic Winches for Substructure Raising Price $ Manufacturer Lantec Industries Drum Diameter, inches (mm) 14 (356) Drum Length, inches (mm) 30 (762) Single line pull Bare drum, lbs (dan) (32648) Full drum, lbs/dan (18148) 5,6 Substructure Raising Lines Price $ Manufacturer Various Line size, inches/mm 1,25 (32) Type 6 X 36 IWRC, EIPS Nominal Strength, Tons (Metric Tons) 80 (73) 5,7 HPU Assembly Price $ Manufacturer Discovery Drilling Equipment Model HPUCR375 Power Electric Motor HP (kw) 75 (56) Output Volume, GPM (LPM) 30 (114) Output Pressure, psi (kpa) 3000 (21000) Oil reservoir, gallons/liters 400 (1520) Price $ ,8 Stairs Quantity 4 Rolling stairs raised with sub Drawworks side and V-Door side Fixed stairs Drillers side to ground Off drillers side as per customers specifications 6
8 RIG SPECIFICATION 5,9 Pullback/Snubbing posts Price $3 000 Number 2 Size, inches (mm) 6 (152) Wall thickness XXH 5,10 V-Door Ramp Price $ Manufacturer Discovery Drilling Equipment Model Number VDRSL650 Dimensions, L X W, feet (mm) 39 X 5 (11887 X 1524) Pipe stop Size, inches (mm) 6 (152) Wall Thickness XXH Type Hinged 5,11 Handrails Price $7 500 Manufacturer Discovery Drilling Equipment Type Square tubing Size, inches (mm) 1,5 (38) Height, inches (mm) 42 (1067) Safety kick plate, size inches (mm) 6 (152) Length Perimter of floor Open, dog house side Open, v-door and exiats 5,12 Flooring, compatible with customers Drawworks and Rotary Manufacturer Discovery Drilling Equipment Type Checker plate Plate thickness, inches (mm) 0,375 (10) Price $ Section 6 - Freight FOB Odessa port CIF Dubai port Price $95 000* Price $ * Delivery to customer provided destination can be quoted upon request *Delivery prices are estimated as of November 1 st and shall be revised as of the shipment date 7
9 PRICING Pricing Summary Section 1 - CM 650 Mast $ Section 2 - SL 650 Substructure $ Section 3 - Documentation and Manuals Included Section 4 - Coating $ Sub Total (FCA Stryi) $ Section 5 - Optional Items $ Sub Total (FCA Stryi) $ Section 6 - Freight Optional Total Quotation $
10 DELIVERY TERMS & CONDITIONS Delivery: 1) Delivery FCA is estimated to be 10 to 15 days from receipt of down payment. 2) Delivery FCA shall be from Striy, Ukraine. 3) Delivery timing is based upon known conditions at the time of this quotation. 4) Delivery timing can change without notice due to actual delivery of outsourced and/or client furnished components. Conditions: 1) Any deviations shall be agreed to as per change order with price decrease/increase and delivery changes based on client's specific requirements. 2) All structural steel will be European weights, grades, and shapes. 3) All prices quoted are ex-works, Striy, Ukraine unless other terms are agreed to. 4) Sales price does not include VAT. 5) Quotation valid for 30 days. 6) All PO s shall be addressed as follows: Discovery Industrial Services Limited 16 Hanover Square Mayfair, London W1S 1HT United Kingdom 7) Standard Warranty attached. Payment Terms - Initial Purchase Order: 1) 40% Down payment 2) 40% upon acceptance. 3) 15% Prior to shipment 4) 5% Upon receipt of Documentation Payment Terms - Change Orders during manufacturing period: 1) 100% due upon receipt of Change Order invoice 9
11 13
12 14
13 15
14 12 16
15 RIG PICTURES AS OF
16 RIG PICTURES AS OF
17 RIG PICTURES AS OF
18 OUR CERTIFICATES 17
Mobile Rigs. The core of drilling innovation
Mobile Rigs The core of drilling innovation Mobile Rigs 1 MR Series Drillmec MR Series mobile trailer and self-propelled rigs are used for conventional drilling, workover and well service applications.
More informationMobile Rigs. The core of drilling innovation
Mobile Rigs The core of drilling innovation Mobile Rigs 1 MR Series Drillmec MR Series mobile trailer and self-propelled rigs are used for conventional drilling, workover and well service applications.
More informationRP 3.0: INSPECTION AND CERTIFICATION OF MASTS. A Recommended Practice (RP) for the Canadian Well Servicing Industry
RP 3.0: INSPECTION AND CERTIFICATION OF MASTS A Recommended Practice (RP) for the Canadian Well Servicing Industry EDITION: 5 RELEASE DATE: October 2016 CANADIAN ASSOCIATION OF OILWELL DRILLING CONTRACTORS
More informationIndex Page No. 1. Power Frame. Page: 7. Page: 2. Special Features. Page: 3 Page: 8. Page: 9. Page: 4. Page: 10. Page: 5. Page: 11.
Index Page No. 1 Page: 2 BSO BSO Square Page: 3 Page: 8 BSST Performer Page: 7 Premiere Power Frame Special Features Page: 4 Star Base Multi-Stand Page: 5 Prestige Side Stand Page: 6 Swing stand Page:
More informationNew Vision In Drilling
HWD Horizontal Well Drillers New Vision In Drilling Newsletter Date - 01/01/09 News Flash: Recent studies have shown that 43.16% of all hydrocarbons are at a depth of 3,000lf and less Special points of
More informationDesigned with the capabilities required to continue to push the boundaries of drilling performance on extended lateral wells and optimized for
Designed with the capabilities required to continue to push the boundaries of drilling performance on extended lateral wells and optimized for faster, safer rig moves The latest in Nabors successful PACE
More informationSMART CUSHION INNOVATIONS SCI100GM General Specifications
SMART CUSHION INNOVATIONS SCI100GM General Specifications DESCRIPTION: The SCI100GM is a redirective, non-gating crash attenuator that consists of a base, supporting frames, a sled, side panels, a wire
More informationWork Order Number *************************************************************************** SECTION C20 STAIRS 02/18
NAVFAC PTS-C20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-C20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION C20 STAIRS 02/18 NOTE: This section
More informationTEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION
TEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION SPECIFICATION NO. MES NO.: AMENDED: NOVEMBER 2004 * LIFT, 4-POST, TRUCK, ELECTRIC/HYDRAULIC, 30,000 POUND LIFT CAPACITY PUBLICATION This specification
More informationSECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM
Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING
More informationPIP STF05521 Details for Angle Railings for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05521 Details for Angle Railings for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of
More informationHIGH MAST CAMERA POLE ASSEMBLY GENERAL
10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera
More informationSECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationMATERIAL STANDARD FOR GANTRY AND OVERHEAD CRANES ORIGINAL EDITION MAY. 1997
IPS-M-GM- 350 MATERIAL STANDARD FOR GANTRY AND OVERHEAD CRANES ORIGINAL EDITION MAY. 1997 This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole
More informationPUSH-BUTTON SERIES SELF-CLEANING LIP LUG DESIGN CLOSED BUMPER BLOCKS
PUSH-BUTTON SERIES EDGE MOUNT HYDRAULIC DOCKLEVELER SELF-CLEANING LIP LUG DESIGN Self Cleaning Lug Style Lip Hinge Zinc Plated Deck & Lip Rods Available Deck Widths 66, 72, 78, 83 Available Capacities:
More information8 Design Specification
This document is not an API Standard; it is under consideration within an API technical committee but has not received all approvals required to become an API Standard. It shall not be reproduced or circulated
More informationProduct Evaluation Report
Product Evaluation Report PER-09040 Page 1 of 5 This Document Published By: Initial Listing Re-Approved 5/12/2010 Progressive Engineering Inc. 58640 State Road 15 Goshen, Indiana 46528 574-533-0337 www.p-e-i.com
More informationInstallation Instructions
CELEBRATING 50YEARS HIGH PERFORMANCE COMPOSITE SOLUTIONS Installation Instructions Dynarail Safety Ladder System Building the World to Last Simplified Ladder Instructions The Dynarail Safety Ladder System
More informationNATIONAL CENTER FOR COMBUSTION RESEARCH AND DEVELOPMENT (NCCRD) INDIAN INSTITUTE OF TECHNOLOGY MADRAS CHENNAI , INDIA
NATIONAL CENTER FOR COMBUSTION RESEARCH AND DEVELOPMENT (NCCRD) INDIAN INSTITUTE OF TECHNOLOGY MADRAS CHENNAI 600036, INDIA Ref. No. ICS/11-12/013/DSTX/TSUN Date: 24 Aug. 2016 Due date: 14 Sep. 2016 Item
More informationITEM 442 METALS FOR STRUCTURES
AFTER NOVEMBER 1, 2008 ITEM 442 METALS FOR STRUCTURES 442.1 Description. These specifications shall govern for materials such as structural steel, wrought iron, bronze, and other metals used in structures,
More informationCOLD DEFORMATION: A STRONGER ALTERNATIVE
COLD DEFORMATION: A STRONGER ALTERNATIVE LOAD TEST: ALUFASE Vs WELDING Load (Tons) / Deformation (mm) 7 6 The cold deformation system has been proven to be 3 times stronger than the traditional welding
More informationSECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationSECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationCEILING MOUNTED ARTICULATING JIB CRANE
SECTION 14657 CEILING MOUNTED ARTICULATING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station
More informationSPECIFICATION SECTION 05515: LADDERS O Keeffe s Aluminum Ladders
Welcome to the O Keeffe s Guide Specification System prepared as an aid to specify in preparing written construction documents. For specification assistance with specific product applications, please contact
More information8 Design Specification
This document is not an API Standard; it is under consideration within an API technical committee but has not received all approvals required to become an API Standard. It shall not be reproduced or circulated
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationINSULATED JOINTS. Monolithic Joints for Electrically Isolating Pipelines
INSULATED JOINTS Monolithic Joints for Electrically Isolating Pipelines INSULATED JOINTS TUBE TURNS INSULATED JOINTS are a pre-fabricated, non-separable, union used to isolate specific sections of pipelines
More informationDesigned specifically to meet Saudi Aramco s requirement for gas and oil drilling; with built-in capabilities to continue to push the boundaries of
Designed specifically to meet Saudi Aramco s requirement for gas and oil drilling; with built-in capabilities to continue to push the boundaries of drilling performance. The latest in Nabors successful
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS
PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment
More informationINVITATION TO BID B I D F O R M. Please submit bid on or before 1:15 pm 101 North Halagueno Street May 30, 2014, at the office of the
BID NO.: 2014-37 INVITATION TO BID B I D F O R M Refuse Containers, Roll-Out Refuse Containers, Lids, Lid Assemblies, Front & Rear Replacement Lids, Piano and Loop Hinges City of Carlsbad Please submit
More informationSECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationPIPE GUIDES SLIDES AND ANCHORS
$4.00 PIPE GUIDES SLIDES AND ANCHORS See Expansion Joint Catalog Guiding Your Piping Decisions 2315 W. HUBBARD ST. CHICAGO, IL 60612 800-533-1024 312-738-3588 FAX 312-421-6327 2 PIPE GUIDES - For Use With
More informationLEADING IN WELDING SAFETY CATALOGUE 2014 CONSTRUCTION. Version 14/01
LEADING IN WELDING SAFETY CATALOGUE 2014 CONSTRUCTION Version 14/01 CONSTRUCTION Table of contents TABLE OF CONTENTS General information 3 Quality 4 Swivel arms 5 Swivel arms supports 16 Poles 18 Columns
More informationMAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE
ELECTRICAL SPECIFICATION 1453 DIVISION OF ENGINEERING DEPARTMENT OF TRANSPORTATION CITY OF CHICAGO REVISED MARCH 14, 2013 MAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE SUBJECT 1. This specification covers
More informationINVITATION TO BID B I D F O R M. Please submit bid on or before 2:15 pm 101 North Halagueno Street June 6, 2013, at the office of the
BID NO.: 2013-30 INVITATION TO BID B I D F O R M Refuse Containers, Roll-Out Refuse Containers, Lids, Lid Assemblies, Front & Rear Replacement Lids, Piano and Loop Hinges City of Carlsbad Please submit
More informationSECTION GROUND STORAGE TANK
SECTION 13210 GROUND STORAGE TANK PART 1 GENERAL 1.01 Summary A. Section Includes: Provision for welded steel storage tank design, fabrication, construction and erection, including tank accessories. B.
More informationAdvantages. - They are quick, clean and. sizes, floor types and construction systems mean the mezzanines can be adapted to meet specific client needs.
Mezzanine Floors Mezzanine floors enable the working height of a space to be utilised to its full potential by doubling or tripling the surface area. They can be designed as storage areas, changing rooms
More informationCORRIGENDUM. ADDENDUM No.02 Dated To Tender No. SDG7515P18/09
MATERIALS DEPARTMENT P.O. DULIAJAN 786 602 DIST. DIBRUGARH ASSAM, INDIA PHONE : 0374 2808724 FAX : 0374 2800533 EMAIL: mmfd1@oilindia.in CORRIGENDUM ADDENDUM No.02 Dated 19.06.2018 To Tender No. SDG7515P18/09
More informationUpstream Midstream Downstream
Upstream Midstream Downstream We Are Your Single Source Solution Provider. Main Headquarters: 1084 Cruse Ave., Broussard, LA 70518 Corporate Office: 1300 West Sam Houston Parkway South, Suite 345, Houston,
More informationTENDER FOR INVITING QUOTATIONS
भ रत य प र द य ग क स स थ न प लक क ड द रभ षस ख य / Phone no: Indian Institute of Technology Palakkad 04923 226300/590/586 अहगलआ एक क त क म पस, क ज़ ह प र Ahalia Integrated Campus, Kozhipara ईम ल/ Email :
More informationCONTENTS SALES POLICY LITERATURE SAMPLES INSTALLATION DVDs
CONTENTS LITERATURE SAMPLES INSTALLATION DVDs This catalog covers most products manufactured and sold by Ameristar Fence Products in Tulsa, Oklahoma. The following general policy statements and terms apply
More informationWALL MOUNTED ARTICULATING JIB CRANE
SECTION 14656 WALL MOUNTED ARTICULATING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and
More informationResidential Deck Safety, Construction and Repair. Juneau Permit Center, 4 th Floor Marine View Center,(907) February 2016
February 2016 Residential Deck Safety, Construction and Repair Juneau Permit Center, 4 th Floor Marine View Center,(907)586-0770 This handout is designed to help you build your deck to comply with the
More informationEquipment Catalog. Most Cost Effective Longest Lasting. Manufactured by
Equipment Catalog Most Cost Effective Longest Lasting www.benkoproducts.com --------- www.g-raffsystems.com Table of Contents Since the invention of the G-Raff Elevating Platform, G-RAFF Safety Systems
More informationSST-II HYDRAULIC BI-FOLD SPECIFICATIONS
PART 1 GENERAL 1.01 DESCRIPTION A. General 1. Furnish SST-II Hydraulic Bi-Fold System complete from one manufacturer. Provide all labor, materials, tools and equipment to furnish the SST-II Bi-Fold System
More informationThe following document can be provided to an Engineer, Contractor, or Owner to allow them to properly specify MESAN s MXR-KM series Cooling Towers.
MESAN MXR-KM Engineering Guide Specifications The following document can be provided to an Engineer, Contractor, or Owner to allow them to properly specify MESAN s MXR-KM series Cooling Towers. 15XXX-
More informationMODEL SPECIFICATIONS: Hydraulically Driven Steel Underpinning Pile Specifications
MODEL SPECIFICATIONS: Hydraulically Driven Steel Underpinning Pile Specifications Mar/2008 v1.0 SECTION 02255 HYDRAULICLY DRIVEN STEEL UNDERPINNING PILES PART 1 GENERAL 1.01 SCOPE OF WORK The work shall
More informationTin mill products. USA schedule of price extras
Tin mill products USA schedule of price extras PRODUCTS OFFERED Black plate - as rolled, single and double reduced Electrolytic chromium coated steel, single and double reduced Electrolytic tin plate,
More informationSECTION VEHICLE LIFTS. B. Section Basic Electrical Materials and Methods: Power and controls wiring.
SECTION 14450 VEHICLE LIFTS PART 1 GENERAL 1.1 SECTION INCLUDES A. Skylifts. 1.2 RELATED SECTIONS A. Section 03300 - Concrete: Footings and foundations. B. Section 16050 - Basic Electrical Materials and
More informationDO NOT INSTALL, OPERATE OR SERVICE PRODUCT WITHOUT HAVING READ AND FULLY UNDERSTAND ALL SAFETY PROCEDURES, WARNINGS, INSTALLATION AND OPERATING
DO NOT INSTALL, OPERATE OR SERVICE PRODUCT WITHOUT HAVING READ AND FULLY UNDERSTAND ALL SAFETY PROCEDURES, WARNINGS, INSTALLATION AND OPERATING INSTRUCTIONS ENCLOSED IN THIS OWNER S MANUAL. 2 SAFETY PROCEDURES
More informationModel # BARK /26/2012 Page 1 of 5
Model # BARK-430 6/26/2012 Page 1 of 5 6/26/2012 Page 2 of 5 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic/Canine
More informationItem 442 Metal for Structures
Item 442 Metal for Structures 1. DESCRIPTION 2. MATERIALS Provide structural steel, high-strength bolts, forgings, steel castings, iron castings, wrought iron, steel pipe and tubing, aluminum castings
More informationSuperior Aluminum Guide Specification 10/4/2016 Non-Welded Aluminum Pipe Railing
The following specification has been developed by: Superior Aluminum Products 555 East Main Street Russia, Ohio 45363-0430 to assist Architects and Designers in the specification of Non Welded Concealed
More informationInstallation Instructions
Installation Instructions Dynarail Safety Ladder System Corrosion Resistant Nonconductive Fire Retardant High Strength-To-Weight Ratio Long, Low Maintenance Life Meets OSHA, BOCA & Other Building Code
More informationPIP STF05520 Details for Pipe Railing for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05520 Details for Pipe Railing for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More information1.0 INTRODUCTION GENERAL SUPPLIER S RESPONSIBILITY CODES AND STANDARDS... 4
TABLE OF CONTENTS 1.0 INTRODUCTION... 3 1.1 GENERAL... 3 1.2 SUPPLIER S RESPONSIBILITY... 3 2.0 CODES AND STANDARDS... 4 2.1 CODES, STANDARDS AND REGULATIONS... 4 2.2 NEPTUNE ENERGY NETHERLANDS B.V. SPECIFICATIONS...
More informationThe following document can be provided to an Engineer, Contractor, or Owner to allow them to
MESAN series MXL Engineering Guide Specifications The following document can be provided to an Engineer, Contractor, or Owner to allow them to properly specify MESAN s MXL series Cooling Towers. 15XXX-
More informationRegardless of any alternative pricing provided, a quotation for the items specified herein shall be provided.
1/5 1.0 PURPOSE This specification describes the minimum requirements for design, material and construction requirements for air receivers. Ensure the design and fabrication of equipment and associated
More information1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
More information1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
More informationTENDER DOCUMENT FOR MANUFACTURING & SUPPLY OF OFFICE CUM STORE CONTAINER
TENDER DOCUMENT FOR MANUFACTURING & SUPPLY OF OFFICE CUM STORE CONTAINER TENDER NO: ROFS/CAPEX/14-15/CON/M-05 DUE DATE : 21. 11. 2014 Issued by: Balmer Lawrie & Co. Ltd. (A Government of India Enterprise)
More informationLAYHER EVENT SYSTEMS CATALOGUE
LAYHER EVENT SYSTEMS CATALOGUE Edition 04.2015 Ref. No. 8111.227 Quality management certified according to ISO 9001:2008 by German TÜV-CERT Layher QUALITY MADE BY LAYHER Headquarters in Eibensbach Plant
More informationK. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.
DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:
More informationOperation & Service Manual
Operation & Service Manual Model: 13-6609-6610 Ground Test Tool Boeing 787 Ram Air Turbine 10/2009 Rev. 01 Includes Illustrated Parts Lists DEVELOPED IN CONJUNCTION WITH HAMILTON-SUNDSTRAND 1740 Eber Rd
More informationMade in U.S.A. Moai Bike Rack Submittal Sheet. Materials: Finishes: Mount Options: Capacity: Setbacks: 2 Bikes
Submittal Sheet Materials: 1. 5 Schedule 40 Steel Pipe (1.90 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available. Powder Coat Our powder coat finish assures a high level
More informationSECTION METAL EQUIPMENT LOCKERS
SECTION 10 51 13 - METAL EQUIPMENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationmodular scaffolding R+
modular scaffolding R+ 1. Stand 6. Transverse U-transom Stand is the main element of modular scaffolding. Made of 48.2x3.2 mm steel pipe. Every 0,5m on the whole stand length are installed steel plates
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More information05510: TAPERED STEEL TROLLEY POLES AND ACCESSORIES
PART 1 GENERAL 1.01 DESCRIPTION A. The Vendor shall fabricate, furnish, test and deliver tapered steel trolley poles, including base plates, reinforced hand holes, anchor bolts, nuts and washers, and accessories
More informationOIL & GAS DIVISION Efficient and effective Project Management is the key to the sucessfull delivery of all our projects and services.
(member of Hidramar Group) OIL & GAS DIVISION Efficient and effective Project Management is the key to the sucessfull delivery of all our projects and services. ABOUT TENERIFE SHIPYARDS Tenerife Shipyards
More informationTable of contents Our products We are offering three product groups: Quality and Service Our product groups Basic products-panels EURO, Light Version, Compensatory, Round Top Gates and Pedestrian Gates
More informationREQUIREMENTS FOR INDOOR INSTALLATION OF PADMOUNTED TRANSFORMERS
REQUIREMENTS FOR INDOOR INSTALLATION OF PADMOUNTED TRANSFORMERS Introduction An applicant applying for permanent electric service who opts to have the padmounted transformers installed inside his building
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
More informationLight Duty Ramps. Loadingdocksupply.com PHONE:
Light Duty Ramps Light Duty Aluminum Dockplates Designed for use by pallet trucks, carts, and foot traffic the A & B model Aluminum Dockplate is lightweight and portable. Accomodates differentials up to
More informationSECTION METAL STUDENT LOCKERS
SECTION 10 51 13 - METAL STUDENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES 1. DESCRIPTION: Furnish and install Heavy-Duty Ventilated (HDV) ELITE Metal Lockers, complete, as shown and specified per contract
More informationSECTION SOUND CONTROL DOORS
SECTION 08380 SOUND CONTROL DOORS 1.0 GENERAL 1.1 DESCRIPTION OF WORK A. Furnish and install Sound Control Doors specified herein and per the locations and orientations shown on the Contract Documents.
More informationSECTION CHAIN LINK FENCES AND GATES (PARK)
SECTION 02821 CHAIN LINK FENCES AND GATES (PARK) PART I GENERAL 1.1 SECTION INCLUDES A. Installation of chain link fences, and gate units provided by single source including erection accessories, fittings,
More informationOffshore Handling Equipment.
Offshore Handling Equipment www.canrig.com 2013 CANRIG s OFFSHORE PRODUCTS Product Jack-Up Semi / Drillship Page / Ref Derrick See Page 3 Top Drive / Dolly Retract Drawworks Torque Wrench DRILLING CONTROLS
More informationMulti-Fab sells to registered dealers only; however, we can assist in finding you a dealer.
ATTACHMENTS This term refers to implements that can be added to a fork truck for handling a load. Attachments such as clamps, slip sheet forks and carpet poles can have an effect on capacity and should
More informationDynarail Safety Ladders & Cages
CELEBRATING 50YEARS Building the World to Last HIGH PERFORMANCE COMPOSITE SOLUTIONS Dynarail Safety Ladders & Cages Dynarail Safety Ladder & Cages Combining corrosion resistance, long life and a low maintenance
More informationMATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2471 NOVEMBER 2008 MATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES TABLE OF CONTENTS 2471.01 SCOPE 2471.02 REFERENCES 2471.03 DEFINITIONS
More informationMade in U.S.A. Wave Style Bike Rack Submittal Sheet. Materials: 1.5 Schedule 40 Steel Pipe (1.
Submittal Sheet Materials: 1.5 Schedule 40 Steel Pipe (1.9 OD) Finishes: Powder Coat Our powder coat finish assures a high level of adhesion and durability by following these steps: 1. Sanded down 2. Washed
More informationMATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 2471 November 2016 MATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES TABLE OF CONTENTS 2471.01 SCOPE 2471.02 REFERENCES 2471.03
More informationModel TS-100 Tubing Spider Installation, Operation, Service and Parts Book Manual
Model TS-100 Tubing Spider Installation, Operation, Service and Parts Book Manual WPI WELLKIN Inc. 8401 Industrial Dr. Pearland, TX 77584 PH: (281) 992-2064 FX: (281) 992-2076 E-mail: sales@wpiwellkin.com
More informationRapid Axial Load Testing of Drilled Shafts
Supplemental Technical Specification for Rapid Axial Load Testing of Drilled Shafts SCDOT Designation: SC-M-712 (9/15) September 4, 2015 1.0 GENERAL This work shall consist of performing a rapid axial
More informationLOADING DOCK EQUIPMENT. A. Section Concrete Forms and Accessories: Placement of anchors into concrete.
LOADING DOCK EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Loading dock equipment of the following types: 1. Dock bumpers. 2. Dock safety packages. 3. Control stations. 1.2 RELATED SECTIONS A. Section
More informationCITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS
CITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS PART 1 - GENERAL 1.01 SUMMARY A. Section Includes furnishing and installing chain-link fabric fence, gate, and appurtenances. 1.02
More informationMade in U.S.A. Sunrise Bike Rack Submittal Sheet. Materials: Finishes: Mount Options: Capacity: Setbacks:
Submittal Sheet Materials: 1.5 Schedule 40 Steel Pipe (1.9 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level
More informationSTANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS
SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107 STANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS REVISION DATE SPECIFICATION # F-S-304_
More informationSECTION MISCELLANEOUS METALS
PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications
More informationOSHA Title 8 General Industry Safety Orders Floor Openings, Floor Holes, Skylights and Roofs
OSHA Title 8 General Industry Safety Orders Floor Openings, Floor Holes, Skylights and Roofs Maximum Static Concentrated Center Load 400 lb. Drop to Failure TEST REPORT REPORT TO: VELUX America LLC. 1418
More informationSECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
More informationResponsibility Check List Sheet Item Description Responsibility Additional
Responsibility Check List Sheet Item Description Responsibility Additional A B C Sketch Brief Layout for the position of the mezzanine. Advise whether requirement to remove intermediate columns to provide
More informationSTANDARD SHELTER SPECIFICATIONS ATTACHMENT A
STANDARD SHELTER SPECIFICATIONS 16-04 ATTACHMENT A Issued: November 2, 2015 Technical Specifications ---------------------------------------------------------------------------------------------------------------
More informationPreventative Maintenance Program
2012 Preventative Maintenance Program Chinook Drilling 8/10/2012 2 3 Table of Contents 117.0 Preventative Maintenance Program...4 118.0 Mission Statement...5 119.0 Overall Objectives...5 120.0 Manufactures
More information# 3: KMI Pulp Moulding System # KMI
# 3: KMI Pulp Moulding System # KMI-400-600 Moulder #M400-600, Process #P400-600, Dryer #- D400-600, stacker and packing table, Estimated Delivery: 7 months from receipt of deposit for machine On site
More informationIndustrial Containers
Industrial Containers Steel King Strength. Innovation. Integrity. Steel King leads the way in rack technology with innovation and draws on more than 40 years of experience in the materials handling industry.
More informationUniversal Panels & Accessories
Universal Panels & Accessories Erection Procedures INTRODUCTION Use common sense when working with Scaffold Your Safety is our #1 Concern Universal Scaffolds are designed with your safety in mind every
More informationITEM 555 CHAIN LINK FENCING
ITEM 555 AFTER MARCH 1, 2012 CHAIN LINK FENCING 555.1 Description. This item shall govern for furnishing the quantities of chain link fencing and gates as shown on the plans, including all posts, bracing
More information