COSTUMIZED INNOVATION
|
|
|
- Suzan Lane
- 6 years ago
- Views:
Transcription
1
2 COSTUMIZED INNOVATION Pankl Aerospace specializes to be the one stop shop for the aviation business by offering the complete range from the design of customized aircraft products to the EASA design certification and the delivery of the parts with EASA Form 1.
3 PART 21J ENGINEERING SERVICES Being an EASA Part 21J approved Design Organisation, Pankl Aerospace offers Engineering Services for a variety of projects. The Engineering Services ranges from designing any components based on customer requirements up to the full EASA certification including any testing required. Pankl staff has experience on more than 400 completed certification projects.
4 PART 21G PRODUCTION SERVICES Being an EASA Part 21G approved Production Organisation, Pankl Aerospace offers Production Services for a variety of projects. Pankl Aerospace is the only approved Production Organisation for Flight Safety Parts in Austria. The production services cover metal and composite components based on customer needs. Parts delivered from Pankl Aerospace are used in Turbine Engines, Helicopter Drive Lines and Aircraft Cabins.
5 EXAMPLES ON PANKL AEROSPACE PRODUCTS
6 CABIN CLASS DIVIDER Being a supplier of all main cabin components, Pankl has developed a Cabin Class Divider for the installation in the passenger compartment. The Cabin Class Divider can be fully customized according to customer demands and there are no limitations on dimensions, color, aircraft type etc. The units are available either made out of a specific carbon made panel or as a phenolic made panel depending on the customer needs. The weight of the Class Divider will be fully optimized on the customer requirements to achieve the lowest possible weight.
7 CABIN STOWAGES Being a supplier of all main cabin components, Pankl has developed different types of Cabin Stowages for the installation in the passenger compartment. The Cabin Stowages can be fully customized according to customer demands and there are no limitations on dimensions, color, aircraft type etc. The units are available either made out of a specific carbon made panel or as a phenolic made panel depending on the customer needs. The weight of the Stowages will be fully optimized on the customer requirements to achieve the lowest possible weight. If you are interested in our services and/or products contact
8 LIGHT WEIGHT CARBON LITERATURE POCKET Being a supplier of all main cabin components, Pankl has developed a light weight Literature Pocket for the installation in the passenger compartment. Literature Pockets are fixed on rigid furnishings to allow the stowage of emergency instructions and any advertising material for passengers. The Carbon made Literature Pocket can be fully customized according to customer demands and there are no limitations on dimensions, color, type of leather, etc. The standard Carbon made Literature Pocket shows with ~175 g approximately half the weight of typically used Literature Pockets with a comparable price. Standard Option:
9 COSMETIC HOLDER Being a supplier of all main cabin components, Pankl has developed a Cosmetic Holder for the installation in the Lavatory. The aluminum made Cosmetic Holder can be fully customized according to customer demands and there are no limitations on dimensions, color, surface finish, etc. The Cosmetic Holder design can also be adapted to already installed provisions. Airline names can be painted on specific areas upon request. The standard Cosmetic Holder shows with ~30 g approximately one third of the weight of typically used Cosmetic Holders with a comparable price. Standard Option:
10 CABIN / EXTERIOR PLACARDS Being a supplier of all main cabin components, Pankl is able to offer the production of any cabin and exterior placard required by the customer. Special materials will be used based on the installation location / environment. All cabin placards meets the flammability requirements of EASA CS 25 / FAR 25.
11 Pankl Aerospace Systems Inc. A member of Pankl Racing Systems Edwards Road Cerritos, CA 90703, USA Pankl Aerospace Systems Europe GmbH A member of Pankl Racing Systems Industriestraße West 4 A-8605 Kapfenberg
Safety Risks in an Airworthiness Organisation
Safety Risks in an Airworthiness Organisation Belinda Swain Chief Airworthiness Engineer Rolls-Royce Plc May 2016 2016 Rolls-Royce plc The information in this document is the property of Rolls-Royce plc
Company Profile PRODUCTS SERVICES OPERATIONS
Company Profile PRODUCTS SERVICES OPERATIONS Who we are E.I.S. Aircraft is a well-established product and service provider focused on the aerospace market with more than 60 years of experience. Our three
Aerospace / Aviation Services Sample Proposal
Aerospace / Aviation Services Sample Proposal Scroll down to read the first part of this sample. When purchased, the complete sample is 13 pages long and is written using these Proposal Pack chapters:
Aerospace Engineering Solutions
Aerospace Engineering Solutions AIRCRAFT DESIGN AND CERTIFICATION SPECIALISTS AIRCRAFT WEIGHING AND LOADING SYSTEM MANAGEMENT FLEET TECHNICAL MANAGEMENT SERVICES PROUDLY SUPPORTING THE ASIA PACIFIC AVIATION
Interior Adhesive Solutions
3M Automotive and Aerospace Solutions Division Interior Adhesive Solutions Meet OEM specifications and aviation regulations with weight-saving, time-saving, strong-bonding interior solutions. 1 Solutions
Solutions in Motion Control and Vibration Isolation
Solutions in Motion Control and Vibration Isolation Application Solutions Global Presence ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions
COMMISSION OF THE EUROPEAN COMMUNITIES. Draft. COMMISSION REGULATION (EU) No /
EN EN EN COMMISSION OF THE EUROPEAN COMMUNITIES Brussels, C Draft COMMISSION REGULATION (EU) No / of [ ] amending Commission Regulation (EC) No 1702/2003 laying down implementing rules for the airworthiness
COMMERCIAL PRESENTATION
WHO WE ARE KP Air Division is the division of KontraProduções, Lda. focused on general and commercial aviation. We use our 15-year know-how in outdoor advertisement and event management, combined with
easyjet s experience of our first safety culture survey Future Sky Safety Public Workshop, 2017 Siân Blanchard and David Cross
easyjet s experience of our first safety culture survey Future Sky Safety Public Workshop, 2017 Siân Blanchard and David Cross something about us > What we do: We are a low-cost European point-topoint
European Aviation Safety Agency. European Technical Standard Order (ETSO) Subject: COCKPIT VOICE RECORDER SYSTEMS
European Aviation Safety Agency ED Decision 2010/010/R Date: 21.12.2010 European Technical Standard Order (ETSO) Subject: COCKPIT VOICE RECORDER SYSTEMS 1 Applicability This ETSO gives the requirements
AEROSPACE. Where ideas take shape. Get to know the Pexco way.
Get to know the Pexco way. Pexco is a North American leader in the design, manufacturing and delivery of custom plastics solutions. Our team of engineers and proven experience in several specialty segments
European Aviation Safety Agency Doc # UG.CAO Approval Date 22/10/2015 UG.CAO Name Validation Date
UG.CAO.00120-003 Name Validation Date Prepared by: Marc GRAGNOLI Validated 19/10/2015 Verified by: Karl SPECHT Validated 22/10/2015 Reviewed by: Dominique PERRON Validated 22/10/2015 Approved by: Wilfried
35,000 EMPLOYEES WORLDWIDE. 18 countries
WELCOME ABOARD A WORLD-CLASS SUPPLIER OF AEROSPACE EQUIPMENT AND SYSTEMS Zodiac Aerospace is a world leader in aerospace equipment and onboard systems for commercial, regional and business aircraft and
DEVELOPEMENT OF A PRODUCTION ORGANIZATION EXPOSITION SCHEME TAKING INTO ACCOUNT EN9100 REQUIREMENTS
25 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES DEVELOPEMENT OF A PRODUCTION ORGANIZATION EXPOSITION SCHEME TAKING INTO ACCOUNT REQUIREMENTS Reyhaneh SAYFI*, Florence Leblond** * Civil Aviation
Helping a Commercial Hangar Reach New Heights
October 2013 King County International Airport Seattle, Washington, USA Helping a Commercial Hangar Reach New Heights Location Seattle, Washington, USA Wall Products KS Series Micro Rib Finishes Custom
TRAINING PROGRAM Overview
1. Overview ADSE Consulting and Engineering BV (ADSE) is proud to announce the collaboration with Co-Guard GmbH (CoG) in the new extended seminar program for the year 2018. The focus of the seminars will
CARRIAGE OF DANGEROUS GOODS BY AIR
IRELAND SAFETY REGULATION DIVISION IRISH AVIATION AUTHORITY The Times Building 11-12 D Olier Street Dublin 2 Tel +353 1 6718655 Fax +353 1 6774068 AFTN EIDWYOYX CARRIAGE OF DANGEROUS GOODS BY AIR AERONAUTICAL
BEECHJET 400. Beechjet Products & Services Catalog
Beechjet Products & Services Catalog 3-Place Divan 3-Place Divan Part Number: 32-0396 3 place divan Applicable Aircraft: Beechjet 400A Hawker Beechcraft 400A Hawker 400XP (400A) 400XT, 400A/XP Features:
EASA Part 21 Compliance Matrix
Weston Aerospace CE8 Issue 2 EASA Part 21 Compliance Matrix Approved By: Peter Rush, Quality Director Date: 31 March 2011 This document is maintained on digital media. The current issue is located on the
KING AIR. Medical Stretchers & Attendant Seats
Medical Stretchers & Attendant Seats Medical Stretchers Description: Kit includes stretcher unit and cover, Ferno model 12-C portable aero (folding) litter, mattress, mattress cover (conforms to FAR 23.853
Safety Regulation A Risked Based Approach To Surveillance
Safety Regulation A Risked Based Approach To Surveillance Surveillance function CASA s surveillance function as set out in section 9 (1)(f) of the Civil Aviation Act: Conducting comprehensive aviation
DANGEROUS GOODS PANEL (DGP) MEETING OF THE WORKING GROUP OF THE WHOLE
International Civil Aviation Organization DGP-WG/10-WP/25 6/10/10 WORKING PAPER DANGEROUS GOODS PANEL (DGP) MEETING OF THE WORKING GROUP OF THE WHOLE Abu Dhabi, United Arab Emirates, 7 to 11 November 2010
DANGEROUS GOODS PANEL (DGP) MEETING OF THE WORKING GROUP OF THE WHOLE
International Civil Aviation Organization DGP-WG/11-WP/66 30/3/11 WORKING PAPER DANGEROUS GOODS PANEL (DGP) MEETING OF THE WORKING GROUP OF THE WHOLE Atlantic City, United States, 4 to 8 April 2011 Agenda
Part 7 OPERATOR S RESPONSIBILITIES
International Civil Aviation Organization DGP/21-WP/11 30/8/07 WORKING PAPER DANGEROUS GOODS PANEL (DGP) TWENTY-FIRST MEETING Montréal, 5 to 16 November 2007 Agenda Item 2: Development of recommendations
Recticel Aviation. Recticel Group. Recticel Aviation in-house product design, engineering and project management. Leader in flexible PU foam
Leader in flexible PU foam Recticel Group Recticel is market leader in the manufacturing and conversion of polyurethane foam and cellular materials in Europe. Our products are used in many varied and diverse
PART K SECTION 2 TRAINING STRATEGY
K-2-1 AIRPORT OPERATIONS MANUAL AIRFIELD OPERATIONS 31 January 2011 PART K SECTION 2 TRAINING STRATEGY 1. for Ground Handling s 1.1 The aircraft ground handling are primarily responsible for the training
A Look back on the EIS of the H175
A Look back on the EIS of the H175 Eric Van Hal CEO OGUK Aviation Seminar 2017 H175 Entry Into Service Table of Contents 1. About NHV 2. NHV s choice for the H175 3. H175 Spec & highlights 4. Entry Into
CASE STUDY TWO IMPLEMENTING A SAFETY MANAGEMENT SYSTEM INDUSTRY CASE STUDIES OCEANIA AVIATION GROUP
CASE STUDY TWO IMPLEMENTING A SAFETY MANAGEMENT SYSTEM INDUSTRY CASE STUDIES OCEANIA AVIATION GROUP Civil AVIATION AuthORITY of New Zealand IMPLEMENTING A SAFETY MANAGEMENT SYSTEM INDUSTRY CASE STUDIES
GORE SKYFLEX aerospace materials
GORE SKYFLEX aerospace materials Tapes and Gaskets Proven materials for sealing and surface protection challenges GORE SKYFLEX Aerospace Materials are a portfolio of unique, commercially-available material
Notice of Proposed Amendment Instructions for continued airworthiness
European Aviation Safety Agency Notice of Proposed Amendment 2018-01 Instructions for continued airworthiness RMT.0252 (MDM.056) EXECUTIVE SUMMARY The objective of this Notice of Proposed Amendment (NPA)
EASA POA update. Jiří NOVÝ POA section manager. CAA UK POA meeting Gatwick 21th March 2017 TE.GEN
EASA POA update Jiří NOVÝ POA section manager CAA UK POA meeting Gatwick 21th March 2017 TE.GEN.00409-001 Production in EASA 21 March 2017 CAA UK POA meeting Gatwick 2 Production in EASA Flight Standards
CEE-BEE CLEANER A-7X7 by Cee-Bee
by Cee-Bee d a t a s h e e t CEE-BEE CLEANER A-7X7 is a concentrated liquid emulsion cleaner that effectively removes greases and oils in immersion, ultrasonic and spray-on cleaning applications. Cee-Bee
The Acceptance of Aircraft Components
Leaflet B-110 The Acceptance of Aircraft Components 1 Purpose The purpose of this Leaflet is to provide guidance on the acceptance of aircraft components, so that responsibilities under the applicable
Seychelles Civil Aviation Authority
Seychelles Civil Aviation Authority Aircraft Maintenance Programmes Checklist The purpose of the Maintenance Programmes Checklist is to assist operators with a view to ensuring that Maintenance Programmes
EASA Compliant Regulatory Consulting & Training
EASA Compliant Regulatory Consulting & Training SAS operates in a very specific market. We are passionate about our customers and are working to meet their needs. Our vision is to deliver, reliable, quality
american airlines terminal 9, jfk international airport Three months before its grand opening, the American Airlines flagship World Gateway Terminal at New York s John F. Kennedy Airport was missing a
Regulatory Inspector Human Factors Competency Framework. Version 1.0 September 2014
Regulatory Inspector Human Factors Competency Framework Version 1.0 September 2014 Regulatory Inspector Human Factors Competency Framework What Are Competencies? Competencies are observable and measurable
Transport and Aerospace Engineering. Oļegs Gorbačovs
ISSN 2255-9876 (online) ISSN 2255-968X (print) December 2016, vol. 3, pp. 62 70 doi: 10.1515/tae-2016-0008 https://www.degruyter.com/view/j/tae Education as a Basic Element of Improving Professional Important
NPA No NOTICE OF PROPOSED AMENDMENT (NPA) No 22/2005 DRAFT DECISION OF THE EXECUTIVE DIRECTOR OF THE AGENCY
NOTICE OF PROPOSED AMENDMENT (NPA) No 22/2005 DRAFT DECISION OF THE EXECUTIVE DIRECTOR OF THE AGENCY AMENDING DECISION NO. 2003/19/RM OF THE EXECUTIVE DIRECTOR OF THE AGENCY of 28 November 2003 on acceptable
6.0B CARRIER REQUIREMENTS AIR
6.0B CARRIER REQUIREMENTS AIR STUDENT WORKBOOK Table of Contents Table of Contents... 2 Module 6.0b: Carrier Requirements Air... 4 Introduction... 4 Introduction... 4 Objectives... 4 Part 175 - Carriage
Paperless Aircraft Operations; IATA s Vision
Paperless Aircraft Operations; IATA s Vision Chris MARKOU IATA Operational Costs Management MRO IT Conference 1 March 24-25, 2015 IATA s paperless initiatives Passenger Reservations, Ticketing, and Airport
SEMAE3009 Producing aircraft detail assemblies
Overview This standard identifies the competences you need to assemble components to produce aircraft detail assemblies, in accordance with approved procedures. It covers both fixed wing and rotary winged
Topic 1 - Recruitment and Selection. N5 Business Management
Topic 1 - Recruitment and Selection N5 Business Management 1 Learning Intentions / Success Criteria Learning Intentions Recruitment and selection Success Criteria By end of this topic you will be able
DG HHeliHHe. FOCA Certification Leaflet (CL) Dangerous Goods Helicopters. Document Reference 54-00_CL_Dangerous_Goods_Helicopters
Federal Department of the Environment, Transport, Energy and Communications DETEC Federal Office of Civil Aviation FOCA FOCA Certification Leaflet (CL) Dangerous Goods Helicopters HHeliHHe Document Reference
AMC and GM to Part 21 Issue 2 Change Information
1. Introduction AMC and GM to Part 21 Issue 2 Change Information The Agency has adopted issue 2 of AMC and GM to Part 21 by ED Decision 2012/020/R of 30 October 2012 as a clean version consolidating the
ANYBODY'S MAINTENANCE ORGANISATION. Part 145 EXPOSITION
ANYBODY'S MAINTENANCE ORGANISATION Part 145 EXPOSITION Reference : Specimen / Expo / 1 Issue : 1 Copy Number : Holder : Date : Sept 2003 THE SPECIMEN EXPOSITION This specimen Exposition has been prepared
Practical Crew Resource Management (CRM) Standards: The Handy Guide
Practical Crew Resource Management (CRM) Standards: The Handy Guide This guide is a standardisation tool, developed by the Flight Crew Human Factors Advisory Panel (FCHF), to help National Aviation Authority
2.2. The Seller shall be responsible for achieving and maintaining a quality performance level of either:
2.0. Supplier Quality Performance: 2.1. When requested by Boeing, Seller agrees to work with Boeing to develop and implement processes designed at improving Seller s quality performance. Process will include
Aviation Legislation. Credit value: 10 Guided learning hours: 60. Aim and purpose. Unit introduction. Learning outcomes
Unit 78: Aviation Legislation Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose H/600/7245 BTEC Nationals This unit gives learners an understanding of the legislation and
3M Scotch-Weld Epoxy Adhesive EC-3542 B/A FR Technical Data Sheet
June 2017 EC-3542 B/A FR Technical Data Sheet Product Description EC-3542 B/A FR is a two-component epoxy adhesive with cure at room temperature or with additional heat to form a tough bond. It has excellent
A CASA Cabin Safety Inspector perspective for the Asia Pacific Cabin Safety Working Group Sue Rice School of Aviation UNSW 03 July 2012
The Australian Aviation Audit Function A CASA Cabin Safety Inspector perspective for the Asia Pacific Cabin Safety Working Group Sue Rice School of Aviation UNSW 03 July 2012 International Civil Aviation
PAL-V Starts Selling Its Commercial Models
PAL-V Starts Selling Its Commercial Models 13 th of February 2017 This week, flying car manufacturer PAL-V has officially started the sales of its commercial models, the Liberty Pioneer and Liberty Sport.
Regulation Air Operations. Acceptable Means of Compliance (AMC) and Guidance Material (GM) Annex III Part-ORO
European Aviation Safety Agency EXPLANATORY NOTE Regulation Air Operations Acceptable Means of Compliance (AMC) and Guidance Material (GM) to Annex III Part-ORO Table of contents EXECUTIVE SUMMARY... 3
Initial and recurrent training programmes must be established and maintained by or on behalf of:
1.5 Training Requirements STATE VARIATIONS: AEG-02 CAG-18 HKG-01 NLG-06 1.5.0 General 1.5.0.1 The successful application of regulations concerning the transport of dangerous goods and the achievement of
Shaping a better future. Part Production for the aerospace industry.
Shaping a better future Part Production for the aerospace industry www.aries-manufacturing.com Aries Manufacturing is Aries Alliance international business brand dedicated to the production of complex
October This document is available to the public through the National Technical Information Service Springfield, Virginia 22161
DOT/FAA/AR-95/14 Office of Aviation Research Washington, D.C. 20591 TP 12570 Proposed Cabin Safety Research Program (Transport Category Airplanes) Transport Canada Aviation 330 Sparks St. Ottawa Ontario
PIA TS 135. Parachute Industry Association (PIA) TECHNICAL STANDARD 135
Parachute Industry Association (PIA) TECHNICAL STANDARD 135 MINIMUM PERFORMANCE STANDARDS FOR PERSONNEL PARACHUTE ASSEMBLIES AND COMPONENTS 1. SCOPE: This document defines the minimum performance standards
Guidance for those nominated as Accountable Manager
Flight Division Flight Operations Information Letter FOI002EN Subject: Guidance for those nominated as Accountable Manager Málsnúmer / code: FMS10080096 Applicable legislation: Aviation Act No. 60/1998
Developments and Challenges for Aluminum A Boeing Perspective
Proceedings of the 9 th International Conference on Aluminium Alloys (2004) Edited by J.F. Nie, A.J. Morton and B.C. Muddle Institute of Materials Engineering Australasia Ltd 24 Developments and Challenges
John Courtright, Structural Integrity Engineering
Impact of Regulations on Cabin Systems Installations John Courtright, Structural Integrity Engineering APEX TC Meeting 22-23 February 2011 Huntington Beach, CA USA 1 Agenda Points The STC process "briefly"
Aviation & Industrial Work Stands and Lifts
Aviation & Industrial Work Stands and Lifts Aviation & Industrial Work Stands Introduction...1 In-House Engineering.....2 C-5 Variable Height Engine Work Stand. 5 Multi-Height Maintenance Platform..8 FireScout
New Technology Implementation at Delta TechOps
at Delta TechOps Eri Hokura RFID Program Manager Cabin Maintenance IATA 10 th Maintenance Cost Conference Athens, Greece September 11, 2014 Contents 1. Delta Air Lines Overview 2. Delta TechOps - Cabin
High Density Seating
High Density Seating High Density Seating Choices Our attractive airline style High Density commuter seats allow you to get the maximum seating capacity in any King Air at the best value. The seats are
Integrated Design & Certifi cation Services
Integrated Design & Certifi cation Services EASA.21J.536 Integrated Design & Certification Services Engineering Design & Certification CDG, a Boeing Company can help you at any point during your engineering
An advisory circular may also include technical information that is relevant to the standards or requirements.
Advisory Circular AC21-8 Appendix A Revision 0 Project Specific Certification Plan Template General Civil Aviation Authority advisory circulars contain guidance and information about standards, practices,
Voluntary Industry Distributor Accreditation Program (AC 00-56)
U.S. Department of Transportation Federal Aviation Administration Voluntary Industry Distributor Accreditation Program (AC 00-56) FY 2004 Audit Report Prepared by Aircraft Certification Service & Flight
DANGEROUS GOODS INSPECTOR S HANDBOOK
DANGEROUS GOODS INSPECTOR S HANDBOOK Edition - 2010 Dangerous Goods Division, New Delhi EDITION 2010, Revision 4 Dangerous Goods Division, New Delhi EDITION 2010, Revision 4 TABLE OF CONTENTS RECORD OF
Knoll and Sustainable Design. Life Chair LEED Credits
Life Chair Overview Life is a light, flexible ergonomic chair designed by Formway Design for Knoll that includes among its multiple awards a Best of NeoCon Gold for Office Seating. Environmental characteristics
The World s First Flying Car Production Model Comes to Life
The World s First Flying Car Production Model Comes to Life 31 st of January 2018 On the 6th & 7th of March (press only) and between the 8th and 18th of March (public days) at the Geneva Motor Show at
Planned Procurement Opportunities Report. February 2018
HILLSBOROUGH COUNTY AVIATION AUTHORITY Planned Procurement Opportunities Report Prepared by the Procurement Department Overview The Planned Procurement Opportunities Report is updated and posted on the
SECTION 6 WEIGHT AND BALANCE CONTENTS. Page General Weight and Balance Record Loading Instructions
CONTENTS Page General..................................... 6-1 Weight and Balance Record...................... 6-2 Loading Instructions........................... 6-4 ISSUED: 29 APR 2016 6-i INTENTIONALLY
MSC NASTRAN AEROELASTICITY FOR AIRCRAFT CERTIFICATION
SESSION TITLE WILL BE COMPLETED BY MSC SOFTWARE MSC NASTRAN AEROELASTICITY FOR AIRCRAFT Robert Lind (TLG Aerospace, USA); Steve Muenzberg (TLG Aerospace, USA) Robert Lind, Engineering Manager SUMMARY MSC
Certification Specifications. and. Guidance Material. for Simulator Data CS-SIMD
Annex to ED Decision 2014/033/R European Aviation Safety Agency Certification Specifications and Guidance Material for Simulator Data CS-SIMD Initial Issue 2 December 2014 1 1 For the date of entry into
It is a great pleasure and honour to be here today and to have the opportunity to address you!
Ladies and Gentlemen, dear Friends, It is a great pleasure and honour to be here today and to have the opportunity to address you! This year we are celebrating the 25 th years of EU aviation internal market.
ADVANCED COMPOSITES. Selector guide AIRCRAFT INTERIORS
ADVANCED COMPOSITES Selector guide AIRCRAFT INTERIORS Introduction SHAPING THE FUTURE OF COMMERCIAL AND CORPORATE AIRCRAFT INTERIOR COMPOSITES TenCate Advanced Composites offers market leading fire-retardant
Innovation on the move Engineered fastening solutions for the Aerospace Industry.
Innovation on the move Engineered fastening solutions for the Aerospace Industry. 1 Expertise in many areas Benefit from the synergies of cross know-how Transportation Automotive Electronics Cutting Tools
Chapter 14 Improving Service Quality and Productivity
GENERAL CONTENT Multiple Choice Questions Chapter 14 Improving Service Quality and Productivity 1. In broad terms, focuses on benefits created for the customer s side of the equation, and addresses the
You count on availability. We provide reliable solutions.
You count on availability. We provide reliable solutions. Your global partner for military aviation Customers around the globe are faced with challenges every day, including increased demands on fleet
1. Introduction. The core part of the EASA management system framework focuses on the following elements:
EASA survey to RMT.0251 Phase II SMS for EASA Part-21 design organisations, EASA Part-21 production organisations and EASA Part-145 maintenance organisations Fields marked with * are mandatory. 1. Introduction
4.0 PLACARDING STUDENT WORKBOOK
4.0 PLACARDING STUDENT WORKBOOK Table of Contents Table of Contents... 2 Module 4: Placarding... 4 Pre-Introduction... 4 Placarding... 4 Objectives... 4 General Rule for Placarding... 4 Placarding Applicability...
Info Package Cockpit
V13102017 Info Package Cockpit Base Vienna (VIE) / Salzburg (SZG) ********** IMPORTANT ********** The information contained in this document is only a non-binding provision of information and does not
Civil Helicopter Capabilities Vector Aerospace - UK
SETTING THE STANDARD OF CUSTOMER SERVICE Civil Helicopter Capabilities Vector Aerospace - UK Civil Helicopter Overview A complete package of helicopter support services across civil and military platforms
Operator Dangerous Goods Inspections
Operator Dangerous Goods Inspections Regional Seminar/Workshop on the Safe Transport of Dangerous Goods 1 OBJECTIVES Explain Inspector Roles Explain Inspection Process 2 REGULATIONS Inspectors Assess Air
Total global performance. Zero compromise. High-speed business aviation connectivity
Total global performance. Zero compromise. High-speed business aviation connectivity High-speed business connectivity in any corner of the globe When your destinations are limitless, your inflight experience
FAA APPROVED ROTORCRAFT FLIGHT MANUAL SUPPLEMENT
FAA APPROVED ROTORCRAFT FLIGHT MANUAL SUPPLEMENT STC SR00713SE for the Bell 204B, 205A, 205A-1, 205B, 210, 212, 412, 412EP, 412CF Agusta AB412, AB412EP Rotorcraft Dev. Corp. UH-1H, Northwest Rotorcraft
The Civil Aviation Authority of Thailand ADVISORY CIRCULAR
The Civil Aviation Authority of Thailand ADVISORY CIRCULAR FOR OPERATIONS MANUAL CONTAINS DANGEROUS GOODS SECTION (OM-A CONTAINS DANGEROUS GOODS AND WEAPONS SECTION OM-D CONTAINS DANGEROUS GOODS TRANING
(Non-legislative acts) REGULATIONS
9.11.2013 Official Journal of the European Union L 299/1 II (Non-legislative acts) REGULATIONS COMMISSION IMPLEMENTING REGULATION (EU) No 1116/2013 of 6 November 2013 amending Regulation (EU) No 185/2010
Title 49: Transportation
Title 49: Transportation PART 175 CARRIAGE BY AIRCRAFT Section Contents Subpart A General Information and Regulations 175.1 Purpose, scope and applicability. 175.3 Unacceptable hazardous materials shipments.
HELICOPTER MAINTENANCE TOOLKIT
HELICOPTER MAINTENANCE TOOLKIT European Helicopter Safety Team 1 st Edition An Official Publication of the International Helicopter Safety Team March 2011 1 All information in this publication has been
Guinness World Record OFFICIAL ATTEMPT MOST PAPER PLANE LAUNCHED SIMULTANEOUSLY
MOST PAPER PLANE LAUNCHED SIMULTANEOUSLY MAKE A DIFFERENCE... and have fun doing it. WE LL FIND THE RIGHT FIT. Looking for the opportunity to become a part of one of the biggest events of the year beginning?
MPL Program Requirements & Lessons Learned
MPL Program Requirements & Lessons Learned 57 th Annual ALPA Safety Forum August 15-18, 2011 Rick Current Manager MPL, ATPL, CPL Programs Training Solutions - Civil & Military, CAE Annex 1 & PANS Training
helicopter lubrication pumps by PM aluminium alloys
Weight reduction of high performance helicopter lubrication pumps by PM aluminium alloys R. Gradinger 1, H. Kilian 1, M. Schuller 2, M. Tauscher 2, P. Schäffler 3 1 LKR Leichtmetallkompetenzzentrum Ranshofen
PTC Service Parts Management for Aerospace and Defense
PTC Service Parts Management for Aerospace and Defense PTC Service Parts Management for Aerospace and Defense Increase System Availability while Reducing Inventory Cost PTC s Service Parts Management for
S1000D User Forum & S-Day 2013
S1000D User Forum & S-Day 2013 Keynote from industry senior Walter A. Stephan (CEO FACC, President of AAI) Page 1 Consider everything. Implement the best. Only the sky is the limit. What sets us apart
UHF RFID Technology on the Front Line RFID in MRO Processes
UHF RFID Technology on the Front Line RFID in MRO Processes Agenda Introduction LHT s RFID Approach Permanent Parts Marking Current Situation & Outlook Lufthansa Aviation Group Company Profile Revenue
1. If I know that airline X has the same seats as I do, will the FAA/EASA apply their data to me?
Koito Seats PAD Question and Answer Summary From the Briefing Sessions held in Köln on the 14 th October and in Singapore on the 21 st October below is a summary of the general questions raised. 1. If
Sub Title. ISAGO and IGOM Alignment Workshop
Sub Title ISAGO and IGOM Alignment Workshop 28 April 2014 ISAGO and IGOM Alignment Speakers Max Corsi, Manager Airport Operations & Safety Chef, Air Transat Sharif Hassan, Manager Quality, Safety, Security,
3.2 Direction, Management, Implementation and Review
STF Safety Management Standards 3 Safety Management Standards The Standards in this section identify the minimum health and safety provision that STF members shall implement. It is recommended that appropriate