BV Lab Number: Technician Name: Test Date: Reviewed By/Date: DILLARD S TEST PROTOCOL FOR DILR US GIFTWARE (V1) Criteria Results Rating

Size: px

Start display at page:

Download "BV Lab Number: Technician Name: Test Date: Reviewed By/Date: DILLARD S TEST PROTOCOL FOR DILR US GIFTWARE (V1) Criteria Results Rating"

Darlene McGee
6 years ago
Views:

Test Date: Reviewed By/Date: DILLARD S TEST PROTOCOL FOR SCOPE: Included but not limited to battery operated decorative figurine, coaster set, picture frame with or without wall mounting, wall plaque

decorations, other wooden/ ceramic/ glassware decorations) as well as Christmas stocking holders and decorative ceramic.

1 Test Date: Reviewed By/Date: DILLARD S TEST PROTOCOL FOR SCOPE: Included but not limited to battery operated decorative figurine, coaster set, picture frame with or without wall mounting, wall plaque resin, tissue box, napkin ring, decorative rack, decorative wall hanging, decorative basket, decorative gift box, vase, photo box, and seasonal decorations (including nutcrackers and hanging decorations, other wooden/ ceramic/ glassware decorations) as well as Christmas stocking holders and decorative ceramic. SUPPLEMENTAL PROTOCOLS *CA Prop 65 *Primary battery powered product - module *Children's products safety CPSD-AN-PTCL US CPSD-EL-PTCL NA DILR-TY-PTCL US -- The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or labeling is required. -- [If applicable] Shall pass Primary Battery Powered Product module -- [If applicable to children] Compliance to standard (attach children's products testing protocol) Note: Additional cost, sample size & TAT may be required if testing to 1 or more supplemental protocols is necessary. Please refer to the above referenced supplemental protocol(s) for additional information. LABELING One Time Use Products **Fair Packaging and Labeling Act OR All Other Products **Uniform Packaging and Labeling Regulations F.P. & L. Act (16 CFR 500) OR NIST Uniform Laws and Regulations Handbook Manufacturer, Packer, or Distributor s Name & Address (City, State & Zip) Product Identification Net quantity of contents shall be expressed in terms of weight or mass, measure, numerical count, or combination so as to give accurate information to facilitate consumer comparison (U.S. and metric units). **Country of origin marking 19 CFR Shall indicate country of origin legibly, permanently, and in comparable size and close proximity to any mention of country other than country in which the article was manufactured or produced. Must be visible at point of purchase. Use labeling Accuracy or adequacy of instructions Warning or cautionary statements Battery labeling - on product 1 Use / care instructions that are clear and understandable shall be provided in language appropriate to destination countries. 1 Shall include assembly, use, maintenance, and safety information as required with no errors or spelling mistakes 1 Provides cautionary labeling as appropriate in language of countries of distribution. 1 Shall provide below information on product Batteries styles / voltage Direction polarity Page 1 of 6

2 Battery labeling - packaging or instruction Battery labeling - packaging Warning label or hangtag Non-food use warnings for ceramics items 1 For products with more than one battery, must include: Do not mix old and new batteries. Do not mix alkaline, standard (carbon - zinc), or rechargeable (nickel cadmium) batteries 1 Shall provide below information on packaging Number of batteries required. Batteries styles / voltage. Batteries included or not. 1 [For decorative items or if applicable] Shall be labeled This is not a toy. For decorative use only. 21 CFR [Only if truly decorative or ornamental and could be used with food - as alternative to meeting lead leaching requirements] Stating one of the following: -"Not for Food Use. May Poison Food", -"Not for Food Use. Glaze Contains Lead. Food Use May Result in Lead Poisoning", -"Not for Food Use - Food Consumed from this Vessel May be Harmful"; And this message must be present in two forms: 1. A conspicuous stick-on label must be on the surface that is clearly visible to the consumer. 2. A conspicuous and legible permanent statement on the exterior surface of the base of the ceramicware. The letters shall be at least 3.2 millimeters (0.125 inch) in height or as provided in the regulation. Page 2 of 6

3 Claim verification - level 2 CPSD-GB All Examine the retail packaging (or submitted artwork). Record each objective (factual) claim which can be substantiated by the testing within the protocols and rate accordingly. ANALYTICAL *Total lead content in surface coatings PHYSICAL CHARACTERISTICS Dimensions - overall Dimensions - internal volume Dimensions - functional parts Parts inventory AOAC (modified) / CPSD-AN CPSD-GB CPSD-GB CPSD-GB Record testing that extend beyond existing net quantity / dimensional testing on this protocol. Record all other objective (factual) and subjective (opinion) claims as NT and rate as DATA. Record information evaluated between the graphic imagery and the product. Record disclaimers on datasheet. 1 All accessible surface coatings in the as received state on items outside of the scope of 16 CFR 1303 shall not contain lead or lead components in which the lead content is in excess of 0.009% (90ppm) of the weight of the total content. Report actual results or include data table within report. Component testing is allowed. Compositing up to 3 like materials is allowed. Client Requirement 1 Report overall dimensions; shall meet label claims. (If applicable) (-0% / +5%). 1 Report internal volume; shall meet label claims. (If applicable) (-0% / +5%). 1 Report overall dimensions of functional parts; shall meet label claims. (If applicable) (-0% / +5%). 1 Shall meet label claims. Page 3 of 6

4 Material type 1 Shall meet label claims. WORKMANSHIP Sharp points and sharp edges 16 CFR / modified All Shall have no sharp points / edges, other than those required for function. Defects Workmanship PERFORMANCE * Fit properties CPSD-GB * Balance CPSD-GB * Wall mount CPSD-GB * Static load CPSD-HL * Resistance to hot water Federal specification AA-H B-80 modified / CPSD-HL * Dishwasher safe CPSD-HL * Effects of hand washing CPSD-HL All All Modification = expanded scope to other products Shall have no discernible surface degradation, including crazing, shivering, denting, bubbles, cracks, stains, deformations, chips, fractures, heavy lines, waves, shear marks, scratches, scuff marks, indentations, or blisters. Shall have no components missing, malformed, and / or fractured. Shall fit various components for which item is intended. 1 [Applicable for wall mounting or hanging items only] Shall be secure, level, and not off balance when hung or mounted as instructed or intended 1 [Applicable for wall mounting or hanging items only] Shall be able to support 2 times actual product weight supported by attachment hardware. 1 [Applicable for wall mounting or hanging items only] Shall withstand loads from appropriately sized items Pour 25 mils. of boiling water and allow to cool. dry surface shall have no graying or spotting Shall exhibit no surface degradation such as cracks, color fading, scratches, or deformation such as warping after 5 cycles. Shall exhibit no exterior surface degradation after being hand washed 10 times using a national brand liquid detergent at peak of 110 F, followed by rinse in cold water. Page 4 of 6

5 * Surfaces scratching CPSD-HL Slide the sample 6 in. (± 1/4 in) forward, in the most unfavorable orientation to make the worst effect, at a rate of approximately 1 in/s and then repeat in reverse direction. Apply force as close to the base of the sample as possible to maintain contact between the sample base and the test surface during sliding. * Durability CPSD-GB * Cycle test - moving components CPSD-GB * Animated performance CPSD-GB * Sound function CPSD-GB * Water leakage resistance CPSD-GB * Effects of hand polishing CPSD-HL * Hanging strength CPSD-GB * Handle strength - loaded CPSD-HL * 3 oz. impact resistance test CPSD-HL Repeat for a total of 3 cycles over the same area. 1 cycle include a 6 inch forward and backward movement. Record and report any observations such as scratching or gouging Shall be functional after 100 times of operations 100 times / cycles use of moving components - no failure and all components must have and maintain a smooth uniform movement throughout each cycle. Shall perform as claimed Suitable for use. 1 [If intended to hold liquid] Shall have no leakage when filled with water up to 8 hours 1 [Silver plate only] No visible change after 1,000 cycles - polishing with medium abrasive sponge, polish (i.e. Wrights brand) at two different spots using moderate pressure. Shall be able to support 2 times actual product weight with no failure. Hold for 24 hours 10 lb static load or 2 times stated capacity. If no handles exist lift container by top edges. Shall provide good holding with no failure or permanent deformation. 1 [Glass and ceramic handle] Attach 3 Oz. steel ball to plastic dowel with loop of string. Hold dowel 3" away and at 90 angle to handle. pull and release ball to impact. No breakage or separation at min 3 oz. impact force Page 5 of 6

6 CPSD-GB * Adhesive performance / ease of removal Tilt resistance Effects of humidity Effects of extreme temperature CPSD-HL CPSD-HL CPSD-HL [Christmas stocking holder only] Must not leave mark or adhesive when removed (wood surface) 1 Shall not tip over at 8 incline plane in the direction of least stability 1 No visual change or failure after 24 hours at 95%RH at 100ºF 1 No visual change or failure after 24 hours at 120 F and 24 hours at 0 F Key: * Additional Charge For This Test ** Mandatory Requirement Results Key: Rating Key: M Meets NM Does Not Meet Good Good NA Not Applicable NT Not Tested Fail Fail C Claimed R Recorded No. Of Required For Complete Testing: 7 No. Of (Fully Packed) Cartons For Transit Testing: 1 Creation Date: OCTOBER 8, 2012 No. Of Working Days For Complete Testing: 7 Editorial Revision Date: OCTOBER 8, 2012 Pricing Review Date: Technical Review Date: OCTOBER 8, 2012 Page 6 of 6

1 Use/care instructions that are clear and understandable shall be provided in language appropriate to destination countries.

1 Use/care instructions that are clear and understandable shall be provided in language appropriate to destination countries. Test Date: Reviewed By/Date: DILLARD S TEST PROTOCOL FOR SCOPE: This protocol is applicable for testing beverage dispenser with stand. SUPPLEMENTAL PROTOCOLS * California Proposition 65 CPSD-AN-PTCL- 06572-US