Thermal Imaging Report
|
|
|
- Lorin Crawford
- 5 years ago
- Views:
Transcription
1 Thermal Imaging Report Inspection Ref. TI BUILDING DEMO (BUILDING) TI LTD / TI BUILD DEMO 17 Feb 2014 Client Site TI LTD TI BUILD DEMO Suite 118, Trident Court 1 Oakcroft Road Chessington KT9 1BD Contacts Demo Demo demo@demo.co.uk
2 Inspection Data Purpose of Survey Reason for Survey Applicable Formulas INTEGRITY ASSESSMENT OF BUILDING ENVELOPE AND ENERGY LOSS INVESTIGATION BREEAM ASSESSMENT YES - THERMAL INDEXING Inspection Commencing 07:00 Weaer Wind Speed DRY <5MPH M/S Mean Ambient Temperature Internal 17.0 Mean Ambient Temperature External 6.0 Temperature Delta between Internal and External 11.0 Thermographer, Certification and ID RICHARD WALLACE - LEVEL 2 THERMOGRAPHY Camera FLIR THERMACAM P640 Software TICOR ANDROID DATA CAPTURE AND REPORTING APPLICATION LINKED TO WEBCOR ONLINE CAMPAIGN MANAGER - BUILDING MODULE Company Accreditation Building Reference Documents Survey BS Accordance ISO GB IP1/06, BRE443, BSRIA BG39/2100 BS EN 13187:1999 THERMAL PERFORMANCE OF BUILDINGS
3 Summary Problems Associated Wi This Inspection 1) PATHS OF AIR LEAKAGE AROUND BUILDING FENESTRATIONS 2) INSULATION INCONTINUITY FOUND WITHIN THE BUILDING ENVELOPE ELEVATIONS 3) THERMAL/COLD BRIDGING ACROSS AREAS OF THE BUILDING ENVELOPE Remedial Recommendations 2) ADD OR REFIT EXISITNG INSULATION IN THE EFFECTED AREAS 3) UTILISE INSULATION AROUND THE THERMAL/COLD BRIDGE WITH A HIGH R-RATING REDUCING THE THERMAL CONDUCTIVITY OF THE AFFECTED AREA 1) IMPROVE SEALS AROUND DOORS AND WINDOWS TO MINIMISE AIR LEAKAGE Suspected Fault Found - Incorrect use of central heating Suspected Fault Found - Insulation Incontinuity Suspected Fault Found - Energy loss rough windows/doors Suspected Fault Found - Spectral found in glazing Suspected Fault Found - Pas of air leakage Suspected Fault Found - Thermal/cold bridging unrelated to window/door frames Suspected Fault Found - Thermal/cold bridging found at window/door frames Suspected Fault Found - Damp Suspected Fault Found - Delamination Oer Problems EITHER ADD ADDITIONAL INSULATION TO THE AREA IF FOUND TO BE MISSING. OLD OR DAMAGED INSULATION MAY REQUIRE REPAIR OR REPLACEMENT DEPENDING ON ECONOMIC ASSESSMENT SHOWING THE MOST COST EFFICIENT AND EFFECTIVE FORM OF ACTION IF THE BUILDING HAS PASSED AN AIR TEST THEN PATHS OF AIR LEAKAGE ARE FOR INFORMATION PURPOSES ONLY AND CAN BE USED FOR REFERENCE AT A LATER DATE IF REQUIRED. SEALS SHOULD BE ASSESSED FOR THEIR INTEGRITY AND THEN EITHER REPAIRED, REPLACED OR ADDED IF THEY ARE FOUND TO BE NOT PRESENT. ANY DAMAGE FOUND SHOULD BE REPAIRED ACCORDINGLY OR PARTS REPLACED IF FOUND TO BE DEFECTIVE OR BEYOND REPAIR IF THE WINDOWS/DOOR FRAMES ARE WITHIN SPECIFICATION THEN THE MANUFACTURERS SPECIFICATION SHOULD BE REFERRED TO FOR U-VALUES AND THE FAULT IS DEEMED IRRELEVANT AND FOR INFORMATION PURPOSES ONLY. IF NOT WITHIN SPECIFICATION, ASSESSMENT MUST BE CARRIED OUT TO DETERMINE IF THE WINDOWS/DOORS CAN BE ADJUSTED TO REDUCE ENERGY LOSSES VIA THE THERMAL BRIDGE OR OF A COMPLETE REPLACEMENT IS REQUIRED
4 Introduction to your Thermographic Building Inspection Welcome to your ermographic building inspection which is designed to assist wi problem identification and diagnostics asscociated wi building energy performance and oer commonly found building defects. This inspection closely follows protocols and surpasses standards required to satisfy e demands of e most stringent ermographic guidelines. The specification utilised includes high resolution ermal imaging cameras, advanced level II ermographic certifications, bespoke Android based tablet software TICOR for instantaneous report generation and delivery rough our online portal WEBCOR. This is a guide which should help you to fully understand how e inspection was performed and how e results were achieved The framework to is inspection can eier be generated onsite during e inspection, building e list during e survey or a list exported to MS Excel can be imported into e Android tablet to provide comprehensive information such as item locations, tag numbers, work orders etc. Images are captured of all areas wiin e specified remit and a record is kept of temperature data to enable a trending or comparitive programme to begin. Subsequent inspections will see e addition of a new image for each inspection so at temperatures can be monitored. Anomalous items have been recorded as problems categorised as one of two types of problem: Thermal This covers temperature related anomalies Visual This covers all visual findings only All item trending images are taken in e same inspection period so at temperatures are relatively stable for e inspection. A complete inventory will be built of e equipment giving Test Status at e time of e inspection allowing transparency to e inspection and what occurred wi each piece of equipment. These Test Status include: TBT To Be Tested These appear in bold on e ermographers tablet to identify which items are still to be tested TESTED Tested Marked as Tested once images and faults have been documented NTLO Not Tested Locked Out Selected if e item could not be opened safely NTNL Not Tested No Load Selected if e item was offline at e time of inspection and could not be started NTNA Not Tested Not Available Selected if e item is no longer available NTNS Not Tested Not Specified Selected if an item is found to be unspecified NTUR Not Tested Under Repair Selected if an item is currently under a repair procedure NSFI Not Scheduled For Inspection Selected if an item is not due or needed to be tested NTTC Not Tested Time Constraint Selected if e inspection has not been allocated enough time or access problems have cause it to overrun. Emissivity is e value in which an object emits it s infra-red radiation and is also directly proportional to it s reflectivity. For example if an item had 0.9 emissivity en it s reflectivity would be 0.1. This inspection uses an emissivity set between 0.8 and 0.96 because is is found to be suitable when assessing e temperatures of most building materials. Emissivity is only changed were absolutely necessary. An example of is would be for brickwork which has a lower emisiivity value known to be Anomalous items are assessed using specific equations. 1. External inspection: Wi e use ermal indexing formula which relates internal and external surface temperature togeer wi a critical temperature factor wi a known value which can be subject to change based on changeable environmental conditions.
5 This adjustable value takes into account e variation in external boundry resistance layer at e building envelope. The value arrived at is known as e External Threshold Temperature or TCse. Any temperature found above is level will be shown by an isoerm included in e fault ermogram. 2. Internal Inspection: Wi e use ermal indexing formula which relates internal and external ambient temperature togeer wi a critical temperature factor wi a known constant of This rises to 0.9 for environments which are particularly humid such as swimming pools. The value arrived at is known as e Internal Threshold Temperature or TCsi. Any temperature found below is level will be shown by an isoerm included in e fault ermogram. Importnat Note: These formulae are not solely relied upon. They are used as guidelines to assist in fault finding. Image interpretation is also used to assess oer ermal anomalies discovered during e survey. Using e above formula values it is possible to use a fault rating system to grade e severity of e fault. The following fault ratings and colour coding have been used: Fault Ratings Minor Important Serious Critical Temperature found eier above TCse or below TCsi Trending images are also supplied of all areas of e building envelope or of e required areas and ese are unencumbered from e isoerms which can cover areas and reduce e ability for e reader to identify where e temperature anomalies lie. Scales are set to a single level for Internal and a single level for external images which allows for a comparison of e ermograms between areas relating to is inspection only. For example, if a ermogram is showing a Formulas: TCsi - fcrsi(ti-te)+te TCse - fcrsi(tse-tsi)+tsi TCsi - Internal Threshold Temperature TCse - External Threshold Temperature fcrsi - Critical Temperature Factor Ti - Average Internal Air Temperature - Mean temperature taken from multiple surface temperature readings Te - Average External Air Temperature - Mean temperature taken from multiple surface temperature readings Tsi - Average Internal Surface Temperature - Mean temperature taken from multiple surface temperature readings Tse - Average External Surface Temperature - Mean temperature taken from multiple surface temperature readings Example: fcrsi (constant) fcrse Ti - 21 Te - 6 Tsi - 20 Tse (21-6)+6=17.25
6 0.93(6-21)+21=7.05 In is example e ermal indexing formula has calculated at e internal reshold temperature is 17.25C and e external reshold temperature is 7.05C. This means at internal measurements should not fall benea 17.25C and external measurements should not exceed 7.05C. Those areas at breach ese resholds will be marked wi a coloured isoerm. This is a colour not relevant to e InfraRed colour palette utilised for e ermogram, usually depicted by e colour green or grey. For furer information on any of e above information please contact our offices. Summary
7 Summary The Infrared Inspection was performed by TI Thermal Imaging, by a certified infrared Thermographer. All of e items inspected are listed in is TICOR report. Any anomalies are listed in order of priority based on e component's temperature rise, as from a reference component of equal type and load at e time of e inspection. TI Thermal Imaging assumes no liability directly or indirectly as a result of is inspection. Priority Current Inspection Prior Inspection Percent of Change Thermal Not Specified 10 = 100% 0 Minor 0 = 0% 0 Important 0 = 0% 0 Serious 0 = 0% 0 Critical 0 = 0% 0 Visual Not Specified 0 0 Minor 0 0 Important 0 0 Serious 0 0 Critical 0 0 Ultrasonic Not Specified 0 0 Minor 0 0 Important 0 0 Serious 0 0 Critical 0 0 I hereby certify e project was inspected by myself or under my direction and at e enclosed data is e result of is inspection. TICOR Wallace, Rich Inventory
8 Inventory Equipment Description Problem #s Status FOUR STOREY REFURB EAST 9 T WEST 10 T MAIN BUILDING NORTH BLOCK A T BLOCK B T BLOCK C T SOUTH BLOCK A 4 T BLOCK B 3 T BLOCK C 2 T BLOCK C STAIRWELL 1 T WEST WEST END 5 T BLOCK C STAIRWELL 6 T EAST T NORTH EAST CORNER T THREE STOREY REFURB EAST 8 T WEST 7 T Problems
9 Problems Problem # Equipment Item ID Area Specific Root Cause Internal Surface Temp. (Tsi) External Surface Temp (Tse) Type Fault Rating Status 1 MAIN BUILDING > SOUTH - BLOCK C STAIRWELL SUSPECTED THERMAL BRIDGE FROM INTERNAL DETAIL 7.0 THERMAL NO ISSUE OPEN 2 MAIN BUILDING > SOUTH - BLOCK C SUSPECTED AIR LEAKAGE AND INSULATION INCONTINUITY 6.0 THERMAL NO ISSUE OPEN 3 MAIN BUILDING > SOUTH - BLOCK B Component: AT SOFFIT AND WINDOWS SUSPECTED AIR LEAKAGE AND INSULATION INCONTINUITY 6.0 THERMAL NO ISSUE OPEN 4 MAIN BUILDING > SOUTH - BLOCK A SUSPECTED AIR LEAKAGE 6.0 THERMAL NO ISSUE OPEN 5 MAIN BUILDING > WEST - WEST END SUSPECTED INSULATION INCONTINUITY 5.0 THERMAL NO ISSUE OPEN 6 MAIN BUILDING > WEST - BLOCK C STAIRWELL SUSPECTED THERMAL BRIDGE FROM INTERNAL DETAIL 11.0 THERMAL NO ISSUE OPEN 7 THREE STOREY REFURB - WEST SUSPECTED THERMAL BRIDGE FROM INTERNAL DETAIL 8.0 THERMAL NO ISSUE OPEN 8 THREE STOREY REFURB - EAST SUSPECTED AIR LEAKAGE, INSULATION INCONTINUITY AND THERMAL BRIDGE 7.0 THERMAL NO ISSUE OPEN 9 FOUR STOREY SUSPECTED AIR LEAKAGE AND 5.3 THERMAL NO ISSUE OPEN
10 REFURB - EAST INSULATION INCONTINUITY 10 FOUR STOREY REFURB - WEST ENERGY LOSS THROUGH WINDOWS 8 THERMAL NO ISSUE OPEN Fault Pages
11 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_44992A.jpg Photo Date: 17/02/2014 File: DC_44993.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description MAIN BUILDING > SOUTH BLOCK C STAIRWELL T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 SUSPECTED THERMAL BRIDGE FROM INTERNAL DETAIL CHECK DETAIL IS TO PRESCRIBED STANDARD, IF REQUIRED ADD APPROPRIATE INSULATION TO REDUCE THERMAL/COLD BRIDGE Calculated External Temp. (Isoerm above) 4.3 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 7.0 Fault Pages
12 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_44996A.jpg Photo Date: 17/02/2014 File: DC_44997.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description MAIN BUILDING > SOUTH BLOCK C T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 SUSPECTED AIR LEAKAGE AND INSULATION INCONTINUITY CHECK SEALS AND REPAIR OR REPLACE WHERE NECESSARY Calculated External Temp. (Isoerm above) 4.4 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 6.0 Fault Pages
13 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_44998A.jpg Photo Date: 17/02/2014 File: DC_44999.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description MAIN BUILDING > SOUTH BLOCK B T AT SOFFIT AND WINDOWS Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 AND AR2 SUSPECTED AIR LEAKAGE AND INSULATION INCONTINUITY CHECK SEALS AND REPAIR OR REPLACE WHERE NECESSARY Calculated External Temp. (Isoerm above) 4.4 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 6.0 Fault Pages
14 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_45002A.jpg Photo Date: 17/02/2014 File: DC_45003.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description MAIN BUILDING > SOUTH BLOCK A T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 SUSPECTED AIR LEAKAGE CHECK SEALS AND REPAIR OR REPLACE WHERE NECESSARY Calculated External Temp. (Isoerm above) 4.4 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 6.0 Fault Pages
15 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_45018A.jpg Photo Date: 17/02/2014 File: DC_45019.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description MAIN BUILDING > WEST WEST END T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 SUSPECTED INSULATION INCONTINUITY REPAIR, ADD OR REPLACE INSULATION AS REQUIRED FOLLOWING INVESTIGATION Calculated External Temp. (Isoerm above) 4.4 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 5.0 Fault Pages
16 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_44994A.jpg Photo Date: 17/02/2014 File: DC_44995.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description MAIN BUILDING > WEST BLOCK C STAIRWELL T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 SUSPECTED THERMAL BRIDGE FROM INTERNAL DETAIL REPAIR, ADD OR REPLACE INSULATION AS REQUIRED FOLLOWING INVESTIGATION Calculated External Temp. (Isoerm above) 4.4 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 11.0 Fault Pages
17 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_44986a.jpg Photo Date: 17/02/2014 File: DC_44987.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description THREE STOREY REFURB WEST T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.6 External Ambient Temp (Te) External Surface Temp (Tse) 3.0 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 AND AR2 SUSPECTED THERMAL BRIDGE FROM INTERNAL DETAIL CHECK SEALS AND REPAIR OR REPLACE WHERE NECESSARY Calculated External Temp. (Isoerm above) 4.0 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 8.0 Fault Pages
18 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_45006A.jpg Photo Date: 17/02/2014 File: DC_45007.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description THREE STOREY REFURB EAST T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 AND AR2 SUSPECTED AIR LEAKAGE, INSULATION INCONTINUITY AND THERMAL BRIDGE REPAIR, ADD OR REPLACE INSULATION AS REQUIRED FOLLOWING INVESTIGATION Calculated External Temp. (Isoerm above) 4.4 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 7.0 Fault Pages
19 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_44988a.jpg Photo Date: 17/02/2014 File: DC_44989.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description FOUR STOREY REFURB EAST T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 15.9 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial DECREASED AR1 AND AR2 SUSPECTED AIR LEAKAGE AND INSULATION INCONTINUITY CHECK SEALS AND REPAIR OR REPLACE WHERE NECESSARY Calculated External Temp. (Isoerm above) 4.4 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 5.3 Fault Pages
20 Fault Pages Client Asset Report Date Problem # Problem Type Fault Rating Problem Status TI LTD TI BUILD DEMO 18/06/ THERMAL NO ISSUE OPEN File: IR_45004A.jpg Photo Date: 17/02/2014 File: DC_45005.jpg Photo Date: 17/02/2014 Location/Equipment Information Trending Data Location Component Status Fault Item/Description FOUR STOREY REFURB WEST T Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) External Ambient Temp (Te) External Surface Temp (Tse) 3.47 Calculated Internal Temp. (Isoerm below) Problem Anomaly Root Cause Remedial ELEVATED AR1 ENERGY LOSS THROUGH WINDOWS CONSIDER UPGRADING TO MORE ENERGY EFFICIENT GLAZING Calculated External Temp. (Isoerm above) 4.3 Internal Surface Temp. (Tsi) External Surface Temp (Tse) 8 Trending Data
21 Trending Data Current Inspection No TI BUILDING DEMO File: DC_44993.jpg Report Date 18 Jun 2015 Item No 1 Status T MAIN BUILDING > SOUTH - BLOCK C STAIRWELL File: IR_44992.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
22 Trending Data Current Inspection No TI BUILDING DEMO File: DC_44997.jpg Report Date 18 Jun 2015 Item No 2 Status T MAIN BUILDING > SOUTH - BLOCK C File: IR_44996.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
23 Trending Data Current Inspection No TI BUILDING DEMO File: DC_44999.jpg Report Date 18 Jun 2015 Item No 3 Status T MAIN BUILDING > SOUTH - BLOCK B File: IR_44998.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
24 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45003.jpg Report Date 18 Jun 2015 Item No 4 Status T MAIN BUILDING > SOUTH - BLOCK A File: IR_45002.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
25 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45017.jpg Report Date 18 Jun 2015 Item No 5 Status T MAIN BUILDING > NORTH - BLOCK A File: IR_45016.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb 2014 Trending Data
26 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45015.jpg Report Date 18 Jun 2015 Item No 6 Status T MAIN BUILDING > NORTH - BLOCK B File: IR_45014.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb 2014 Trending Data
27 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45013.jpg Report Date 18 Jun 2015 Item No 7 Status T MAIN BUILDING > NORTH - BLOCK C File: IR_45012.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb 2014 Trending Data
28 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45019.jpg Report Date 18 Jun 2015 Item No 8 Status T MAIN BUILDING > WEST - WEST END File: IR_45018.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
29 Trending Data Current Inspection No TI BUILDING DEMO File: DC_44995.jpg Report Date 18 Jun 2015 Item No 9 Status T MAIN BUILDING > WEST - BLOCK C STAIRWELL File: IR_44994.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
30 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45009.jpg Report Date 18 Jun 2015 Item No 10 Status T MAIN BUILDING - EAST File: IR_45008.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb 2014 Trending Data
31 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45011.jpg Report Date 18 Jun 2015 Item No 11 Status T MAIN BUILDING - NORTH EAST CORNER File: IR_45010.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb 2014 Trending Data
32 Trending Data Current Inspection No TI BUILDING DEMO File: DC_44987.jpg Report Date 18 Jun 2015 Item No 12 Status T THREE STOREY REFURB - WEST File: IR_44986.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
33 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45005.jpg Report Date 18 Jun 2015 Item No 13 Status T THREE STOREY REFURB - EAST File: IR_45006.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
34 Trending Data Current Inspection No TI BUILDING DEMO File: DC_44989.jpg Report Date 18 Jun 2015 Item No 14 Status T FOUR STOREY REFURB - EAST File: IR_44988.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Trending Data
35 Trending Data Current Inspection No TI BUILDING DEMO File: DC_45005.jpg Report Date 18 Jun 2015 Item No 15 Status T FOUR STOREY REFURB - WEST File: IR_45004.jpg Photo Date: 17/02/2014 Inspection History Inspection Reference Date Inspected Area Specific Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) Internal Surface Temp. (Tsi) External Surface Temp (Tse) TI BUILDING DEMO 17 Feb Forms
36 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Location/Equipment Information Location MAIN BUILDING > SOUTH Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.3 Component Problem BLOCK C STAIRWELL Internal Surface Temp. (Tsi) External Surface Temp (Tse) 7.0 File: IR_44992A.jpg Photo Date: 17/02/2014 File: DC_44993.jpg Photo Date: 17/02/2014
37 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
38 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Location/Equipment Information Location MAIN BUILDING > SOUTH Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.4 Component Problem BLOCK C Internal Surface Temp. (Tsi) External Surface Temp (Tse) 6.0 File: IR_44996A.jpg Photo Date: 17/02/2014 File: DC_44997.jpg Photo Date: 17/02/2014
39 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
40 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Location/Equipment Information Location MAIN BUILDING > SOUTH Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.4 Component Problem BLOCK B AT SOFFIT AND WINDOWS Internal Surface Temp. (Tsi) External Surface Temp (Tse) 6.0 File: IR_44998A.jpg Photo Date: 17/02/2014 File: DC_44999.jpg Photo Date: 17/02/2014
41 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
42 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Location/Equipment Information Location MAIN BUILDING > SOUTH Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.4 Component Problem BLOCK A Internal Surface Temp. (Tsi) External Surface Temp (Tse) 6.0 File: IR_45002A.jpg Photo Date: 17/02/2014 File: DC_45003.jpg Photo Date: 17/02/2014
43 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
44 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Location/Equipment Information Location MAIN BUILDING > WEST Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.4 Component Problem WEST END Internal Surface Temp. (Tsi) External Surface Temp (Tse) 5.0 File: IR_45018A.jpg Photo Date: 17/02/2014 File: DC_45019.jpg Photo Date: 17/02/2014
45 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
46 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Location/Equipment Information Location MAIN BUILDING > WEST Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.4 Component Problem BLOCK C STAIRWELL Internal Surface Temp. (Tsi) External Surface Temp (Tse) 11.0 File: IR_44994A.jpg Photo Date: 17/02/2014 File: DC_44995.jpg Photo Date: 17/02/2014
47 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
48 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.6 External Ambient Temp (Te) External Surface Temp (Tse) 3.0 Location/Equipment Information Location THREE STOREY REFURB Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.0 Component Problem WEST Internal Surface Temp. (Tsi) External Surface Temp (Tse) 8.0 File: IR_44986a.jpg Photo Date: 17/02/2014 File: DC_44987.jpg Photo Date: 17/02/2014
49 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
50 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 16.0 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Location/Equipment Information Location THREE STOREY REFURB Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.4 Component Problem EAST Internal Surface Temp. (Tsi) External Surface Temp (Tse) 7.0 File: IR_45006A.jpg Photo Date: 17/02/2014 File: DC_45007.jpg Photo Date: 17/02/2014
51 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
52 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) 15.9 External Ambient Temp (Te) External Surface Temp (Tse) 3.5 Location/Equipment Information Location FOUR STOREY REFURB Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.4 Component Problem EAST Internal Surface Temp. (Tsi) External Surface Temp (Tse) 5.3 File: IR_44988a.jpg Photo Date: 17/02/2014 File: DC_44989.jpg Photo Date: 17/02/2014
53 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Forms
54 Forms Current Inspection No TI BUILDING DEMO Report Date 18 Jun 2015 # Corrective # PLEASE ADD CORRECTIVE WORK ORDER ABOVE Thermal Information Internal Ambient Temp (Ti) Internal Surface Temp (Tsi) External Ambient Temp (Te) External Surface Temp (Tse) 3.47 Location/Equipment Information Location FOUR STOREY REFURB Calculated Internal Temp. (Isoerm below) Calculated External Temp. (Isoerm above) 4.3 Component Problem WEST Internal Surface Temp. (Tsi) External Surface Temp (Tse) 8 File: IR_45004A.jpg Photo Date: 17/02/2014 File: DC_45005.jpg Photo Date: 17/02/2014
55 Repair Information Loss to Production Yes No Unknown Consequences of Failure Repair Date Repaired By Parts Req. Before Failure Root Cause Parts Req. After Failure Repair Procedure Repair Recommendation Repair Action Client Work Appraisal
56 Client Work Appraisal We are continually trying to improve our service and ensure at our inspections are carried out to e highest standards. Please use e form below to add your comments, anonymously if you prefer, and send back to us at e address above or: demo@demo.co.uk Service Excellent Good Mediocre Poor Comments Office Response time to enquiry Content of information sent on enquiry Telephone and manner Price Value Engineer Time keeping Appearance Code of conduct Subject knowledge Meod of work Engineer flexibility Inspection Specification Equipment and software Report content Report delivery time Report retrieval Oer comments
Thermal Imaging Report
Thermal Imaging Report Inspection Ref. (PIPE WORK) TI LTD / 10 th Mar 2014 Client Site Contacts TI LTD Suite 118, Trident Court 1 Oakcroft Road Chessington Surrey KT9 1BD Demo Demo demo@demo.co.uk Inspection
Infrared Thermographic Inspection Provided for
Infrared Thermographic Inspection Provided for Sonoco Sonoco, Sonoco Protective Protective Solutions Solutions - Putnam - Putnam CT CT Infrared Thermography Electrical Inspections Mechanical Inspections
Thermal Imaging. By Colin Pearson Head of Condition Monitoring BSRIA
Thermal Imaging In Association with Anderson Mechanical Services Loughgall, Armagh BT61 8HZ www.andersonmechanical.net Email: info@andersonmechanical.net By Colin Pearson Head of Condition Monitoring BSRIA
DryScan Limited was engaged to complete a Pre-Purchase Scan only moisture ingress thermal imaging inspection for Joe Blogs at 8 Anywhere, Auckland.
Infrared Inspections DryScan Limited PO Box 869, Whangaparoa, Auckland 0943 Free phone: 0800-DRYSCAN ~ Mobile: 021 892 056 ~ Fax: 0064 9 421 1792 Email: bryce@dryscan.co.nz 6 th March 2012 Joe Blogs 8
Building Performance Evaluation in Domestic Buildings
BG 64-2016 BPE Domestic_D3-2010 Legislation cover.qxd 07/10/2016 12:21 Page 1 A BSRIA Guide www.bsria.co.uk SA M PL E Building Performance Evaluation in Domestic Buildings A guide to effective learning
Thermal Imaging Inspection. Report Commissioned By:
Thermal Imaging Inspection Report Commissioned By: Sample Property Address: Sample: Inspection Reference: Sample 1/11 Contact Information: Report Master Inspections Fax: 1300 725 743 Email: Web: ivan@reportmaster.com.au
Infrared Energy Report
Infrared Energy Report John Jones 5 Anytown Rd. Anytown, NJ 08892 Prepared by: www.njamerispec.com Richard Roshak 3 Derbyshire Lane Somerset, NJ 08873 njamerispec@verizon.net 732-356-6840 Sunday, September
Energy Auditing Home inspections & Weatherization. withthermal Imagers
Energy Auditing Home inspections & Weatherization withthermal Imagers Peter Hachey Fluke Electronics Canada LP Agenda General Introduction Thermography Principles Inspecting with IR Thermal Imaging in
Structural Performance Tests of VHB Structural Glazing Tapes
3 Performance Tests of VHB Glazing Tapes Technical Bulletin September, 2010 Introduction 3M VHB Acrylic Foam Bonding Tapes have been used worldwide in a variety of applications in the construction industry.
Stucco Moisture Inspection Report
Website:www.ibgoodinspector.com E-Mail:support@ibgoodinspector.com January 11, 2006 Stucco Moisture Inspection Report Property Address 123 Our Street OurTown, USA 12345 Report Ordered By: Mr. & Mrs. Client
Document Ref: AM P&S 1009 INNOVATIVE UK DESIGNED COMPOSITE WINDOWS, DOORS & CURTAIN WALL. Products & Services Guide.
Document Ref: AM P&S 1009 INNOVATIVE UK DESIGNED COMPOSITE WINDOWS, DOORS & CURTAIN WALL Products & Services Guide www.amprofiles.com Design-5 Composite / Timber Aluminium Clad Design-5 is a high quality
Infrared Technology application in Building Envelopes: Applications, ASTM Standards, and Limitations
Infrared Technology application in Building Envelopes: Applications, ASTM Standards, and Limitations Christopher N. Grey, Emily C. Wartman Simpson Gumpertz & Heger, 41 Seyon Street, Building 1, Suite 500,
Infrared Inspection Report
Infrared Inspection Report 716 Glen Oaks Dr., Franklin, TN. David A. Andersen & Associates Building Science Thermographer #33784 TN HI Lic#40 4772 Chester Harris Rd Woodlawn Tennessee 37191 (615)406-6808
Mario D. Gonçalves, Patenaude-Trempe 1 Pierre Gendron, Patenaude-Trempe 2 Tony Colantonio, PWGSC 3. Abstract
Commissioning of Exterior Building Envelopes of Large Buildings for Air Leakage and Resultant Moisture Accumulation using Infrared Thermography and Other Diagnostic Tools Mario D. Gonçalves, Patenaude-Trempe
Tilt and turn hardware
Turn-only hardware and Tilt and turn hardware Quality assurance RAL-GZ 607/3 February 2009 Preface The quality assurance of turn-only hardware and tilt and turn hardware has been a voluntary commitment
Thermal Patterns Created By Moisture Accumulation Within Exterior Masonry Walls by A. Colantonio* and G. Desroches ** * Public Works And Government Services Canada, Ottawa, Canada ** Public Works And Government
ASTATT1 Prepare to carry out air tightness testing
ASTATT1 Prepare to carry out air tightness testing Overview This standard is for those who carry out air tightness and/or air change rate testing of buildings of any size or complexity. It covers those
Module number 6 provides an on-line, self-paced training seminar on energy efficiency and energy conservation for residential buildings.
Module number 6 provides an on-line, self-paced training seminar on energy efficiency and energy conservation for residential buildings. 1 This chapter sets forth the requirements for energy efficiency
Loss Prevention Standard
Loss Prevention Standard LPS 1208: Issue 2.2 This Loss Prevention Standard is the property of BRE Global Ltd. and is made publicly available for information purposes only. Its use for testing, assessment,
Homesol Passive House Design Process
Homesol Passive House Design Process Passive Houses are residential, commercial and institutional buildings in which a comfortable temperature can be achieved year round with a 75% 85% reduction in energy
Weathertightness test to BS 6375: Part 1: 2009 on a Beaufort Secure Design Ltd open outward, single door with side screen
Weathertightness test to BS 6375: Part 1: 2009 on a Beaufort Secure Design Ltd open outward, single door with side screen Prepared for: Mr. Dale Pegler Beaufort Secure Design Ltd 19 October 2009 0578 Page
SOLTIUS MyPM: Mobile Plant Maintenance
SOLTIUS MyPM: Mobile Plant Maintenance NEW ZEALAND S MOST TRUSTED SAP PROVIDER MyPM is a user-focused, comprehensive, affordable solution for mobilising SAP Plant Maintenance, developed by Soltius New
Infrared Inspection Report
Infrared Inspection Report 1234 Sample St, Anywhere Inspection Date/Time: 3/12/2007-11:00 AM Prepared For: Dave Smith Prepared By: Norton Inspection Co. 6632 Telegraph Rd, #346 Bloomfield Hills, MI 48301
IR Cameras and Building Insulation Performance
IR Cameras and Building Insulation Performance Jay Bowen Infrared Training Center FLIR Systems, Inc All images are property of ITC and FLIR Systems, Inc Outline Infrared Inspection of Building Envelopes
WARRANTY CONDITIONS FOR upvc WINDOWS/DOORS
WARRANTY CONDITIONS FOR upvc WINDOWS/DOORS A. upvc WINDOWS AND DOORS UAB WINDEX (hereinafter called Seller ) ensures to the original customer that the sold upvc windows and doors (hereinafter called Windows
Contact Details: Phone Fax . Work Description: New Building Extensions Refurbishment Change of Use. Yes No Method:
BCA Section J- Energy Efficiency Deemed- to- Satisfy Provisions Assessment Sheet 1. Project Overview Client Name: Address: Contact Person: Contact Details: Phone Fax Email Project: Work Description: New
Glass and Building Regulations: Thermal Insulation and Energy Efficiency.
Pilkington Activ TM CI/SfB (31) Ro5 (A3j) March 2003 ENERGY SPECIAL MANAGEMENT APPLICATIONS Glass and Building Regulations: Thermal Insulation and Energy Efficiency. England and Wales Approved Documents
Determination 2015/048
Determination 2015/048 Regarding the compliance with the Building Code of proposed retrofitted urea formaldehyde foam wall insulation in a 60-year-old weatherboard clad house at 26 Porritt Street, Paeroa
Procurement and Asset Management
Standard Operating Procedure 3 (SOP 3) Procurement and Asset Management Why we have a procedure? This document is applicable to any ICT related asset. An ICT asset is any piece of equipment that can be
Thermal imaging of the outer surface of the Laboratory for engines and vehicles at the Faculty of mechanical engineering and naval architecture
Thermal imaging of the outer surface of the Laboratory for engines and vehicles at the Faculty of mechanical engineering and naval architecture Doris Županić, Antonio Bolarić, Mia Stančić, Denis Piljek,
April Section 3.3. Built-up Metal Walls
April 2012 Section Built-up Metal Walls Built-up Metal Walls Built-up metal walls Built-up metal wall design Thermal insulation Built-up metal walls can be installed on all types of residential and non-residential
Sample Report, Auckland
Building and Infrared Inspections Sample Report, Auckland REPORT TYPE: DATE OF INSPECTION: 11th April 2015 DRYSCAN LIMITED PO Box 869, Whangaparaoa, Auckland 0932 Free phone: 0800-DRYSCAN Mobile: 021 892
A GUIDE TO ENERGY EFFICIENCY COMPLIANCE
AUSTRALIAN WINDOW ASSOCIATION GUIDE SERIES A GUIDE TO ENERGY EFFICIENCY COMPLIANCE AN INDUSTRY GUIDE TO COMPLIANCE WITH ENERGY EFFICIENCY AND THERMAL COMFORT REQUIREMENTS FOR WINDOWS AND DOORS VERSION
UNDERSTANDING SOUTH AFRICAN
Coming Soon Book and pay before [date] and get a discount per delegate. i The body of knowledge necessary to thoroughly inspect a typical South African building is vast. This 3-day workshop has been designed
HILTI CP 657 Firestop Brick
Data Sheet HILTI CP 657 Firestop Brick The enclosed pages are taken from the Hilti Firestop Systems Manual Edition April 2011 Supported by additional standard details For Material Safety data sheets visit
Refusal to issue a building consent for a house with insulated concrete walls at 11 York Road, Riversdale, Southland
Determination 2009/104 Refusal to issue a building consent for a house with insulated concrete walls at 11 York Road, Riversdale, Southland 1. The matters to be determined 1.1 This is a determination under
High Insulation (Hi+) Window and Door Systems
High Insulation (Hi+) Window and Door Systems Since its inception in 1985 Metal Technology is now one of the UK and Ireland s leading designers and suppliers of bespoke architectural aluminium window,
Influence of design and leakages of the window-wall connection on the sound insulation.
Influence of design and leakages of the window-wall connection on the sound insulation. Heinz FERK 1 ; Blasius BUCHEGGER 2 ; Marlon MEISSNITZER 3 1, 2, 3 Graz University of Technology, Austria ABSTRACT
The Fundamentals of Refractory Inspection with Infrared Thermography
The Fundamentals of Refractory Inspection with Infrared Thermography Sonny James Level I, II & III Certified Infrared Thermographer Managing Director Thermal Diagnostics Ltd 15 Robertson Street, Les Efforts
Using Infrared Thermography as an Added Diagnostic Tool in Building Inspections
Using Infrared Thermography as an Added Diagnostic Tool in Building Inspections Roy Chan Consumers Choice Property Consultants Inc. ABSTRACT When performing most common building inspections, the methodology
Non Destructive Energy Evaluation
Non Destructive Energy Evaluation Prepared for: DoubleTree Hilton Baltimore North Pikesville 1726 Reisterstown Rd Pikesville, MD 21208 Prepared by: Thomas Hurley and Jeremy Moore HurleyIR, Inc. 4757 Buffalo
High Insulation (Hi+) Window and Door Systems
High Insulation (Hi+) Window and Door Systems Since its inception in 1985 Metal Technology is now one of the UK and Ireland s leading designers and suppliers of bespoke architectural aluminium window,
AHERA ASBESTOS INSPECTION & MANAGEMENT PLAN. for. Administration Building Parkland Drive Shaker Heights, Ohio
AHERA ASBESTOS INSPECTION & MANAGEMENT PLAN for Administration Building 15600 Parkland Drive Shaker Heights, Ohio March 2017 CONTENTS OF INSPECTION REPORT AND MANAGEMENT PLAN PART I BUILDING INSPECTION/REINSPECTION
Skill Set CPCSS00004 Provide Building Surveying Services for Residential Buildings up to Three Storeys
Skill Set CPCSS00004 Provide Building Surveying Services for Residential Buildings up to Three Storeys Candidate Coaching & RPL Pack 2018 Table of Contents Introduction... 3 What pathways are available
From Planning to Reporting: How to Properly Conduct Infrared Inspections of Electrical Systems
From Planning to Reporting: How to Properly Conduct Infrared Inspections of Electrical Systems Mary F. Molle, Vice President of Operations Level III Certified Infrared Thermographer Jersey Infrared Consultants
Window Labelling Program for India
Window Labelling Program for India Stakeholder consultation meeting : October 13, 2012, New Delhi Centre for Advanced Research in Building Science and Energy, CEPT University, Ahmedabad INDIA Rajan Rawal,
Report on the Decamex cleaning of two fin fan banks. Trial at Australian oil refinery. Prepared by Neil Mahoney. May-09
Report on the cleaning of two fin fan banks Trial at Australian oil refinery Prepared by Neil Mahoney May09 Table of Contents Table of Contents... 2 Summary... 3 Introduction... 3 Results... 4 First fin
WinMark Performance of Curtain Walling and Rainscreen Cladding
WinMark Performance of Curtain Walling and Rainscreen Cladding 1.0 Introduction 1.1 The scheme is owned and operated by Wintech Engineering Limited (WEL) in accordance with the requirements of BS EN ISO/IEC
Weathertightness test to BS 6375: Part 1: 2009 on a Beaufort Secure Design Ltd open outward, Bi-folding/ sliding door with standard threshold
Weathertightness test to BS 637: Part 1: 2009 on a Beaufort Secure Design Ltd open outward, Bi-folding/ sliding door with standard threshold Prepared for: Mr. Dale Pegler Beaufort Secure Design Ltd 26
11 June h00 Closing date for delivery of quote 19 June Contact Person
Transnet Port Terminals Request for Quotation No REF 11108113 Page 1 of 7 PROVISION OF CANTEEN SERVICES FOR TRANSNET SOC LTD (REG. NO 1990/000900/30) OPERATING AS TRANSNET PORT TERMINALS (HEREINAFTER REFERRED
Storm Damage Assessment Report For: 1234 Example Street., Houston, TX 77002
Storm Damage Assessment Report For: 1234 Example Street., Houston, TX 77002 Prepared For: Miriam Saliba nspection Date: 9/6/2017 Prepared By: Adam Wells TREC License # 21140 105 E Spreading Oaks Ave, Friendswood,
Guideline for Building Envelope Commissioning: New Buildings
Guideline for Building Envelope Commissioning: New Buildings Introduction Building envelope failures may arise from inadequacies in the design, construction and operation of buildings and appear to be
Thermal Imaging Report
Thermal Imaging Report 123 Renovation Street Manalapan, NJ 07726 Prepared for: Mr. and Mrs. Homeowner Prepared by: A Full House Inspection Co. LLC 530 Prospect Avenue Little Silver, NJ 07739 Prepared by
Weathertightness test to BS EN :2006 +A1:2010 clauses 4.2, 4.5 and 4.14 on a Smart Architectural Aluminium Alitherm 700 reversible window
Weathertightness test to BS EN 14351-1:2006 +A1:2010 clauses 4.2, 4.5 and 4.14 on a Smart Architectural Aluminium Alitherm 700 reversible window Prepared for: Mr. M. Walford Smart Architectural Aluminium
WALLTITE ECO Air Barrier System. Welcome
WALLTITE ECO Air Barrier System Welcome Program WALLTITE ECO air barrier system Assembly and installation Evaluation and compliance Program and support 2 Design System components sealant WALLTITE ECO spray
Certified Thermal Details and Products Scheme
Certified Thermal Details and Products Scheme Marmox Thermoblock (100 mm and 140 mm blocks) Prepared for: Date: 13 August 2015 Report Number: Mark Bowman, UK technical manager HPR357-1002 BRE Scotland
Please complete the questionnaire and fax it to
Partners in Protection / C-TPAT Supply Chain Security Questionnaire Dear: Supply Trade Partner As you are aware there have been several changes in the transportation industry over the past few years. One
For building inspections
Thermal imaging basics For building inspections An infrared building inspection guidebook Fluke Thermal Imaging Infrared Building Inspection Guidebook Contents Page Section 3 4 5 6 9 10 12 Introduction
BRE Global. Guidelines to use Schedule 1, Form Q and to use Staged warrants in Certification for Approved Certifiers of Design.
BRE Global Guidelines to use Schedule 1, Form Q and to use Staged warrants in Certification for Approved Certifiers of Design August 2010 Section 6 Energy Staged Warrants and the Use of Schedule 1 / Form
General Product & Quality Specification
Date: 25/09/2017 Revision: 06 General Product & Quality Specification Exterior Paint Grade FX Range Introduction: The flush paint grade FX doors are designed for exterior use, however to maintain product
Using Prometheus weather files. Andrew Cripps Sustainable Development Group AECOM
Using Prometheus weather files Andrew Cripps Sustainable Development Group AECOM Contents AECOM SDG Our work on Climate Change Adaptation Modelling approach and weather data summary Wellcome Trust Building
ORDINANCE NO. An ordinance amending Chapter 59, Dallas Energy Conservation Code, of the Dallas City
12-19-16 ORDINANCE NO. 3 0 32 5 An ordinance amending Chapter 59, Dallas Energy Conservation Code, of the Dallas City Code, as amended; adopting with certain changes the 2015 Edition of International Energy
Exterior Elevated Elements Inspection Guidelines
Exterior Elevated Elements Inspection Guidelines Planning and Development 1. Guideline Purpose These guidelines are intended to assist practicing professionals in complying with Berkeley Municipal Code
RAE Offshore PO Box 4930, Sheffield S8 2JU Office: Portergate, 257 ecclesall Rd, Sheffield, United Kingdom, S11 8nx Telephone: +44 (0)
10053518 RAE Offshore PO Box 4930, Sheffield S8 2JU Office: Portergate, 257 ecclesall Rd, Sheffield, United Kingdom, S11 8nx Telephone: +44 (0) 1142 096 284 Fax: +44 (0) 1142 096 001 Email: enquiries@raeoffshore.com
BC Energy Efficiency Act - Regulatory Proposal for Window and Door Products
BC Energy Efficiency Act - Regulatory Proposal for Window and Door Products A number of regulations for window and door products are currently included in the Energy Efficiency Standards Regulation that
ADVANTAGES & QUALITIES OF upvc WINDOW SYSTEMS
ADVANTAGES & QUALITIES OF upvc WINDOW SYSTEMS S worldwide presence! WINDOWS OF THE FUTURE Nowadays, windows are the decisive factor when it comes to a building s comfort, cost and also its appearance.
Plant Integrity. Hertel Plant Integrity. save energy
Plant Integrity 1 Hertel Plant Integrity The power to save energy Strength in partnership 2 Plant Integrity 3 Rapid payback Tailor-made expertise maintenance. In addition, safety standards n investigation
Sterling Accreditation Energy Assessor Guidance QA Auditing of EPCs
Sterling Accreditation Energy Assessor Guidance QA Auditing of EPCs Practices and Procedures Manual Version 1.1 The Sterling Accreditation quality auditing manual has been created to support Energy Assessors
5. Vacuum Insulated Panels (VIPs) 5.1 INTRODUCTION TO THE TECHNOLOGY AVAILABLE TYPES OF THIS TECHNOLOGY...3
Case Study July 2012 5. Vacuum Insulated Panels (VIPs) Table of Contents 5.1 INTRODUCTION TO THE TECHNOLOGY...2 5.2 AVAILABLE TYPES OF THIS TECHNOLOGY...3 5.3 STRENGTHS, WEAKNESSES, OPPORTUNITIES AND THREATS...4
Thermal Evaluation Report
1234 Madison Rd. Anywhere, US, 12345 Prepared for: John Smith Prepared by: Your Company Name Here 1234 Any Street Anywhere, US 12345 Visual report of findings. Energy losses and moisture infiltration.
MAJOR DEFECTS BUILDING SURVEY REPORT
MAJOR DEFECTS BUILDING SURVEY REPORT XXXXXX Road Bedminster Bristol BS3 XXX Prepared for Mr XXXXXXX July 2017 T J Maggs MRICS MAGGS AND ALLEN 22 Richmond Hill Clifton Bristol BS8 1BA 0117 973 4049 survey@maggsandallen.co.uk
Sure (Isle of Man) Limited Managed Networks Essential Level Support Service Terms and Conditions
The Sure (Isle of Man) Limited ( Sure ) Managed Networks Essential Level Support Service Terms and Conditions should be read in conjunction with the: General Terms and Conditions, all of which apply. Where
1. Name of work Repairing and Renovation works Institute s building (Basement, GF+3 Floors) at Plot No.C -37,Sector 62,Noida, UP.
SHORT LISTING OF CONTRACTORS FOR REPAIRING AND RENOVATION OF THE BUILDING OF THE INSTITUTE AT PLOT NO C- 37, SECTOR -62,NOIDA WITH REGARD TO PRESS NOTICE ISSUED IN HINDUSTAN TIMES, HINDUSTAN & MINT ON
**Section C and R ; change to read as follows:
Recommended Amendments to the 2012 International Energy Conservation Code North Central Texas Council of Governments Region (Climate Zone 3 of the IECC) The following sections, paragraphs, and sentences
IDBI Bank Limited Regd. Office : IDBI Tower, WTC Complex, Cuffe Parade, Mumbai CIN: L65190MH2004GOI148838
Regd. Office : IDBI Tower, WTC Complex, Cuffe Parade, Mumbai 400005 CIN: L65190MH2004GOI148838 Supply of Packaged Drinking Water at IDBI Tower, Mumbai Applications are invited for prequalification of vendors
BULLETIN 34: BUILDING ENVELOPE SERVICES APPROPRIATE PROFESSIONAL PRACTICE
200-4010 Regent Street Burnaby BC V5C 6N2 Canada Telephone: (604) 430-8035 Toll Free Canada-wide: 1-888-430-8035 Facsimile: (604) 430-8085 BULLETIN 34: BUILDING ENVELOPE SERVICES APPROPRIATE PROFESSIONAL
PassiveDesign.org. Passive Construction. Name:...
PassiveDesign.org Passive Construction About: This handout contains the information from the Passive Construction topic pages on passivedesign.org. Name:... Passive Construction A Passivhaus is a super-insulated,
Building elements. Guideline for SINTEF Technical Approval
Building elements. Guideline for SINTEF Technical Approval 23.08.2018 1. Scope This guideline concerns application for SINTEF Technical Approval (TG) for prefabricated building elements. The guideline
ENERGY STAR Technical Specification for Residential Windows, Doors, and Skylights Sold in Canada Version 4.0 February 1, 2015
ENERGY STAR Technical Specification for Residential Windows, Doors, and Skylights Sold in Canada This technical specification determines how residential windows, doors, and skylights sold in Canada qualify
High Insulation (Hi+) Window and Door Systems
High Insulation (Hi+) Window and Door Systems Since its inception in 1985 Metal Technology is now one of the UK and Ireland s leading designers and suppliers of bespoke architectural aluminium window,
BBA Information Bulletin No 3
BBA Information Bulletin No 3 APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS FOR CONSTRUCTION Reflective foil insulation Conventions for U value calculations Introduction Reflective foil
Residential Energy Code Update
Residential Energy Code Update www.phrc.psu.edu August 28 th, 2018 Brian Wolfgang Provider # 60114115 PPP ID: 1562 Description On May 1, 2018, the PA Uniform Construction Code (PA UCC) Review and Advisory
Requirements Specification for the Selection of Manufacturers of Photovoltaic (PV) Modules
Requirements Specification for the Selection of Manufacturers of Photovoltaic (PV) Modules Company information Company name: Address: Telephone no.: Fax no.: E-mail: Internet: Legal status: Formation:
Sub-Contractors Questionnaire
Sub-Contractors Questionnaire 1 General Company Information 1.1 Company Name: 1.2 Address: 1.3 Main Contact Details Name: Telephone Number: Email Address: 1.4 Please list all the services your company
WILL THE REAL R-VALUE PLEASE STAND UP
WILL THE REAL R-VALUE PLEASE STAND UP Joe J. Johnson Department of Architecture University of Oregon Eugene, Oregon jjohnson@uoregon.edu ABSTRACT This paper describes an approach to determine actual R-
Documentation of the component 25. May 2011 Thermal transmittance (U-value) according to BS EN ISO 6946
Thermal transmittance (U-value) according to BS EN ISO 6946 Page 1/6 OUTSIDE INSIDE Assignment: External wall Manufacturer Name Thickness [m], number Lambda [W/(mK)] R [m²k/w] Rse 0.0400 1 Generic Building
Enhance Power Equipment Reliability with Predictive Maintenance Technologies
Enhance Power Equipment Reliability with Predictive Maintenance Technologies November 2012/1910DB1208 by S. Frank Waterer, Electrical Engineerinig, Fellow Schneider Electric USA, Inc. Make the most of
The following are the final results of the ballot:
Results of Electronic Ballot of RESNET Board of Directors on Adopting Proposed Revised Interim Guidelines for Thermographic Inspections of Buildings April 18, 2012 The following are the final results of
ENERGY STAR Technical Specification for Residential Windows, Doors, and Skylights Sold in Canada Version 5.0 January 1, 2020 FINAL
ENERGY STAR Technical Specification for Residential Windows, Doors, and Skylights Sold in Canada Version 5.0 January 1, 2020 FINAL This technical specification determines how residential windows, doors,
EIFS Moisture Inspection Report
EIFS Inspection Report Property Address: 417 Palace Cir. Trussville, AL 35173 Inspection ordered by: Joshua Bollinger PH: (205) 683-6484 (866) 435-4985 FA: (205) 278-5301 500 Southland Drive, Ste. 134,
InterNACHI Home Energy Survey Provider Operation Policies and Procedures
InterNACHI Home Energy Survey Provider Operation Policies and Procedures Mission of the InterNACHI HESP Training and Certification Program To establish and maintain excellence of our energy inspections
UK Product Guide. Security Doors.
UK Product Guide. Security Doors. We are committed to compliance at all times with statutory and mandatory requirements of UK Building Standards and Harmonized Product Norms Teckentrup Security Doors Perfect
CEN/TC 89 - Thermal performance of buildings and building components
CEN/TC 89 - Thermal performance of buildings and building components Standard reference EN 1934:1998 EN 1946-1:1999 EN 1946-2:1999 EN 1946-3:1999 EN 1946-4:2000 EN 1946-5:2000 6946:2007 7345:1995 8497:1996
April Section 5. Basements
April 2012 Section 5 Basements Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice for protection of structures against water from the ground, gives three categories of waterproofing
ENERGY STAR Technical Specification for Residential Windows, Doors, and Skylights Sold in Canada Version 5.0 January 1, 2020 FINAL
ENERGY STAR Technical Specification for Residential Windows, Doors, and Skylights Sold in Canada Version 5.0 January 1, 2020 FINAL This technical specification determines how residential windows, doors,
High Performance. System THE BEST WINDOWS ARE MADE FROM PROFILE 22
High Performance High Curtain Performance Wall Curtain System Wall System THE BEST WINDOWS ARE MADE FROM PROFILE 22 High Performance Curtain Wall System The Best Windows Are Made From Profile 22 As part
The next generation in housing management solutions
The next generation in housing management solutions Welcome to the next generation Contents 02 The next generation in Housing Management Systems 03 Customer focus 06 Managing your property assets 06 Flexible
Great Ocean Rd Ice Creamery
Great Ocean Rd Ice Creamery BCA Section J - JV3 Compliance Report Revision: 01 Job No: 2171 Date: 7 July 2015 ADP Consulting Pty Ltd Level 10, 10 Queens Rd, Melbourne Vic 3004 www.adpconsulting.com.au
The following is the result of the electronic ballot of the RESNET Board:
Results of Electronic Ballot of RESNET Board of Directors on proposed RESNET Standard for Performance Testing to Undergo the RESNET Amendment Public Review and Comment Process June 15, 2009 The following