Sho-Rate TM "50" Model 1350E and Sho-Rate TM "150" Model 1355E

Transcription

1 Data Sheet Sho-Rate TM "50" Model 1350E and Sho-Rate TM "150" Model 1355E Ten-to-one rangeability Heavy-wall, precision bore, borosilicate glass metering tubes A wide range of scales on the metering tube with contrasting background for easy readability Tubes sealed on compression gasket by threaded seal spindle Tubes removable without disconnecting instrument Integral float stops prevent loss of float during tube removal Interchangeable tubes and floats Models 1350E and 1355E DESCRIPTION The Sho-Rate 1350 and 1355 Series of low flow indicators provides a cost-effective means of flow indication for both 5% (Model 1355) and 10% (Model 1350) accuracy requirements. Available options include the Standard or NRS TM integral needle control valves, as well as flow controllers on the inlet or outlet. SPECIFICATIONS Model 1350E Sho-Rate "50" (No valve) Model 1350E-8800 Sho-Rate "50" with optional integral flow controller Model 1350E Sho-Rate "50" with optional needle valve Capacities 1350 Series: Refer to Tables 1 or 2, or 3 and Series: Refer to Tables 3 and 4, or 5 Accuracy 1350 Series Standard: Accuracy of ±10% of full scale from 100% to 10% of scale reading 1355 Series Standard: ±5% of full scale from 100% to 10% of scale reading Repeatability 0.5% full scale Rangeability 10 to 1 Pressure 200 psig at temperatures up to 250 F Pressure Drop Inquire at factory Flow Meter Assembly Pressure Equipment Directive (97/23/EC) Note: Equipment falls under Sound Engineering Practice (SEP) according to the directive. Model 1355E Sho-Rate "150" (No valve) Model 1355E-8800 Sho-Rate "150" with optional integral flow controller Model 1353E Sho-Rate "150" with optional needle valve 1

2 Models 1350E and 1355E Data Sheet Side Plates: Standard: Black anodized aluminum Optional: 316 stainless steel Window: Clear polycarbonate; Back Window: Milk white polycarbonate Float Stops: Standard: Teflon Optional: 316 Stainless Steel Tube Packing: Standard: Buna-N (Brass and aluminum meters), Viton-A fluoroelastomers (316 stainless steel meters) Optional: Teflon, EPM (also known as EPR) (Cartridge Open) O-rings: Standard: Buna-N (Brass and aluminum meters), Viton-A fluoroelastomers (316 stainless steel meters) Optional: Teflon (not available with needle valves), EPM, Kalrez Connections Standard: Horizontal female 1/8" NPT threaded adapters with locknuts for front of panel mounting Figure 1 Dimensions - Sho-Rate 1350E Scales 1350 Series: Length: 65 mm, nominal Graduations: Standard: 0-65mm, or linear reference scale with air or water calibration table Series: Length: 150mm, nominal Graduations: Standard: mm, or linear reference scale with air or water calibration table. Optional: for either 65 mm or 150 mm direct reading scale, ceramic ink fused on glass tube or metal scale plate mounted beside tube Type: Standard: Ceramic ink fused on meter tube with contrasting yellow background Materials of Construction Metering Tubes: Borosilicate glass Floats: Glass, 316 stainless steel, sapphire, Carboloy, tantalum Structural Members: End fittings: Chrome plated brass, black anodized aluminum, 316 stainless steel Dimensions Refer to Figures 1, 2 and 4 OPTIONAL EQUIPMENT Standard integral flow control valve on inlet or outlet (See DS-VA-CART-eng). NRS integral flow control valve on inlet or outlet (See DS-VA-8503-eng). These valves are particularly suitable for precise control requirements, and are recommended for flow rates below 500 sccm of Air (@STP) or 10 cc/min water. Flush mounting bezels in aluminum Threaded adapters and locknuts for front of panel mounting (standard with 1/8" NPT) 1/8" and 1/4" compression fittings 1/4" female NPT connections 1/4" ID serrated hose connections Base plates, with or without level ORDERING INFORMATION (Refer to Table 6) 1.Model 2.Size, connections, type 3. Quantity required 4.Fluid 5. Minimum, normal and maximum operating temperature 2

3 Data Sheet Models 1350E and 1355E Model 1350E Sho-Rate "50" with optional needle valve and flush mounting bezel Figure 3 Optional Equipment (Cartridge IV Open) Figure 2 Dimensions - Sho-Rate 1355E 6.Minimum, normal and maximum operating pressure (inlet and outlet) 7.Minimum, normal and maximum flow rate 8.Materials of construction a.end fittings b.side plates c.bezel d.elastomers 9.Fluid 10.Fluid specific gravity 11.Fluid viscosity 12.Unusual system conditions (For ranges and pressure drops other than those listed, consult factory). 13.Optional equipment a.valve type and location b.flow controller and type 3

4 Models 1350E and 1355E Data Sheet Model 1350E-8800 Controller on Inlet Model 1350E-8900 (Controller on Outlet) Figure 4 Dimensions - Sho-Rate 1350E & 1355E with Integral Flow Controller 4

5 Data Sheet Models 1350E and 1355E Table 1 Capacities for Sho-Rate Model 1350E Rib Guided Tubes, Spherical Floats RIBBED TUBES, SPHERICAL FLOATS M ETER TUBE FLOAT MAXIM UM FLOW RATE SIZE NO. MATERIAL WATER AIR* GPH CODE LPH CODE SCFH CODE NLPH CODE GLASS JB JB JB7 3.4 JB8 SAPPHIRE JC JC JC3 5.0 JC1 R-2-65-A STN. STL JC JC JC7 9.0 JC6 CARBOLOY 0.10 JB JB JB JB3 TANTALUM 0.11 JD JC JD JD3 GLASS KB KB KB7 4.0 KB9 SAPPHIRE KC KD KC2 5.5 KC3 R-2-65-B STN. STL KC KC KC KC8 CARBOLOY 0.12 KB KB KB KB6 TANTALUM 0.13 KD KD KD KD1 2 GLASS 0.11 LB LB LB LB8 SAPPHIRE 0.15 LC1 0.6 LC2 1.3 LC LC4 R-2-65-C STN. STL LC7 1.4 LC8 2.0 LC LC6 CARBOLOY 0.65 LB3 2.4 LB2 3.0 LB LB5 TANTALUM 0.65 LD1 2.6 LD2 3.2 LD LD4 GLASS 0.65 M B9 2.4 MB7 3.8 MB8 100 M C1 SAPPHIRE 0.95 MC2 3.6 MC3 5.0 MC4 130 MC5 R-2-65-D STN. STL MC7 6.0 MD1 7.5 MC6 200 MC8 CARBOLOY 2.40 M B5 9.0 MB MB3 280 M B4 TANTALUM 2.60 MD MD MD2 300 MD4 GLASS 2.40 NB8 8.5 NB NC1 340 NB9 SAPPHIRE 3.40 NC NC NC6 460 NC5 R-6-65-A STN. STL ND ND NC9 650 ND2 CARBOLOY 8.50 NB NB NB5 950 NB6 TANTALUM 9.0 ND ND ND ND4 6 GLASS 8.0 PB PB PC PB7 SAPPHIRE 12.0 PC PC PC PC2 R-6-65-B STN. STL PD PC PC PC6 CARBOLOY 28.0 PB3 100 PB2 130 PB PB4 TANTALUM 30.0 PD7 110 PD6 140 PD PD4 * FLOW RATES GIVEN ARE MAXIMUM VALUES. AIR FLOWS ARE AT 14.7 PSIA AND 70 DEGREES F. Table 2 Capacities for Sho-Rate Model 1350E Plain Tapered Tubes, Spherical Floats PLAIN TAPER TUBES, SPHERICAL FLOATS SCFH Press. Drop ** GPH Press. Drop ** TUBE AND FLOAT AIR* Inches W.C. CODE TUBE AND FLOAT WATER Inches W.C. CODE 1-65A GLASS AB4 1-65C GLASS AB5 2-65A GLASS BA7 2-65C STN. STL DA5 2-65B STN. STL CA4 2-65D STN. STL CA8 3-65A GLASS EB4 3-65C GLASS EB9 3-65B STN. STL EB8 3-65D STN. STL EC1 4-65A GLASS FC3 4-65C GLASS FD3 4-65B STN. STL FC8 4-65D STN. STL FD6 5-65A GLASS GB6 5-65C GLASS GC4 5-65B STN. STL GC1 5-65D STN. STL GC5 6-65A GLASS HB8 6-65C GLASS HC7 6-65B STN. STL HC5 6-65D STN. STL HD1 6-65E CARBOLOY HD3 6-65F CARBOLOY HD4 * FLOW RATES ARE MAXIMUM VALUES. AIR FLOWS ARE AT 14.7 PSIA AND 70 DEGREES F ** PRESSURE DROPS ARE APPROXIMATE TRADEMARKS Carboloy... General Electric Co. Kalrez... DuPont Performance Elastomers NRS... Brooks Instrument, LLC Sho-Rate... Brooks Instrument, LLC Teflon... E.I. DuPont de Nemours & Co. Viton-A... DuPont Performance Elastomers 5

6 Models 1350E and 1355E Data Sheet Table 3 Tube and Float Code, Detachable Scale Option, 1st Digit CODE MODEL 1350 TUBE MODEL 1355 TUBE A 1-65 R-2-15-A B 2-65A R-2-15-AA C 2-65B & D R-2-15-AAA D 2-65C R-2-15-B E 3-65 R-2-15-C F 4-65 R-2-15-D G 5-65 R-6-15-A H 6-65 R-6-15-B J R-2-65-A K R-2-65-B L R-2-65-C M R-2-65-D N R-6-65-A P R-6-65-B Y NO TUBE NO TUBE Table 4 Tube and Float Code, Detachable Scale Option, 2nd & 3rd Digits DETACHABLE SCALE INSCRIPTION METER FLOAT SPECIAL SPECIAL ACCURACY MATERIAL SINGLE DUAL BLANK MM LINEAR SCALE SCALE SCALE STANDARD GLASS 1A 1N 2A 2N 3A ( %) STN. STL. 1B 1P 2B 2P 3B (1355-5%) SAPPHIRE 1C 1Q 2C 2Q 3C CARBOLOY 1D 1R 2D 2R 3D TANTALUM 1E 1S 2E 2S 3E *ALUMINUM 1F 1T 2F 2T 3F CALIBRATED GLASS 1G 1U 2G 2U (1350-5%) STN. STL. 1H 1V 2H 2V (1355-2%) SAPPHIRE 1J 1W 2J 2W CARBOLOY 1K 1X 2K 2X TANTALUM 1L 1Y 2L 2Y *ALUMINUM 1M 1Z 2M 2Z N/A NONE 9A 9B 9C Table 5 Capacities for Sho-Rate Model 1355E Rib Guided Tubes, Spherical Floats 6 *ALUMINUM SPOOL FLOAT FOR 15 CC/MIN AIR AVAILABLE ONLY WITH R-2-15-AAA CAPACITIES (RIB GUIDE TUBES, SPHERICAL FLOATS) - FOR USE WITH 1355 SERIES ONLY MAXIMUM FLOW RATE * MODEL CODE - SCALE ON TUBE METER WATER SIZE TUBE NO. FLOAT MATERIAL (CC/MIN.) AIR MM % LINEAR GLASS SCC/M CA6 CA1 SAPPHIRE SCC/M CA8 CA3 R-2-15-AAA STN. STL SCC/M CA7 CA2 CARBOLOY SCC/M CA9 CA4 TANTALUM SCC/M CB1 CA5 GLASS SCC/M BA6 BA1 SAPPHIRE SCC/M BA8 BA3 R-2-15-AA STN. STL SCC/M BA7 BA2 CARBOLOY SCC/M BA9 BA4 TANTALUM SCC/M BB1 BA5 GLASS SCC/M FA6 FA1 SAPPHIRE SCC/M FA8 FA3 2 R-2-15-D STN. STL SCC/M FA7 FA2 CARBOLOY SCC/M FA9 FA4 TANTALUM SCC/M FB1 LIQ. GAS FA5 GLASS SLPM AA6 AB7 AC3 AA1 SAPPHIRE SLPM AA8 AB9 AC4 AA3 R-2-15-A STN. STL SLPM AA7 AB8 AC6 AA2 CARBOLOY SLPM AA9 AC1 AC5 AA4 TANTALUM SLPM AB1 AC2 AC7 AA5 GLASS SLPM DA6 DB2 DA1 SAPPHIRE SLPM DA8 DB4 DA3 R-2-15-B STN. STL SLPM DA7 DB3 DA2 CARBOLOY SLPM DA9 DB5 DA4 TANTALUM SLPM DB1 DB6 DA5 GLASS SLPM EA6 EB2 EA1 SAPPHIRE SLPM EA8 EB4 EA3 R-2-15-C STN. STL SLPM EA7 EB3 EA2 CARBOLOY SLPM EA9 EB5 EA4 TANTALUM SLPM EB1 EB6 EA5 GLASS SLPM GA6 GB2 GA1 SAPPHIRE SLPM GA8 GB4 GA3 R-6-15-A STN. STL SLPM GA7 GB3 GA2 CARBOLOY SLPM GA9 GB5 GA4 6 TANTALUM SLPM GB1 GB6 GA5 GLASS SLPM HA6 HB2 HA1 SAPPHIRE SLPM HA8 HB4 HA3 R-6-15-B STN. STL SLPM HA7 HB3 HA2 CARBOLOY SLPM HA9 HB5 HA4 TANTALUM SLPM HB1 HB6 HA5 NOTE: ALL AIR FLOWS ARE AT 14.7 PSIA AND 70 DEGREES F. * FLOW RATES SHOWN ARE MAXIMUM CAPACITIES. DIRECT READ SCALES MAY END AT SLIGHTLY DIFFERENT MAXIMUM FLOWS.

7 Data Sheet Models 1350E and 1355E Table 6 Ordering Information and Model Code PURGE FLOWMETER DESCRIPTION 1350E 65 MM TUBE, SIZES E 150 MM TUBE, SIZES 2-6 TUBE, SCALE AND FLOAT MODEL 1350 OR 1355 DETACHABLE SCALE - SEE TABLES 3 & 4 xxx Enter 3 Digit Model Code MODEL SEE TABLE 1 OR 2 MODEL SEE TABLE 5 TUBE PACKING O-RING MATERIAL (METER/VALVE ASSEMBLY) A BUNA -N BUNA-N (STD FOR ALUMINUM AND BRASS METERS) B VITON BUNA-N C VITON VITON (STD FOR STN. STL. METERS) D VITON TEFLON (NO VALVE) D VITON TEFLON 0-RINGS METER/KALREZ 0-RINGS VALVE E VITON EPM F VITON KALREZ (NO VALVE) F VITON KALREZ (WITH VALVE) G TEFLON BUNA-N H TEFLON VITON J TEFLON TEFLON (NO VALVE) J TEFLON TEFLON 0-RINGS METER/KALREZ O-RINGS VALVE K TEFLON EPM L TEFLON KALREZ L TEFLON KALREZ (WITH VALVE) M EPM EPM N BUTYL BUTYL P NO PACKING OR TUBE BUNA-N Q NO PACKING OR TUBE VITON R NO PACKING OR TUBE TEFLON (NO VALVE) R NO PACKING OR TUBE TEFLON O-RINGS METER/KALREZ O-RINGS VALVE S NO PACKING OR TUBE EPM T NO PACKING OR TUBE KALREZ U NO PACKING OR TUBE BUTYL FITTING AND ADAPTER MATERIAL/PROCESS CONNECTION SIZE & TYPE A BRASS/ 1/8" NPT D BRASS/ THD 1/8" NPT WITH LOCKNUTS (STANDARD) G BRASS/ 1/4" NPT (STD WITH FLOW CONT.) L BRASS/ THD 1/4" NPT WITH LOCKNUTS P BRASS/ 1/8" COMPRESSION S BRASS/ THD 1/8" COMPRESSION WITH LOCKNUTS V BRASS/ 1/4" COMPRESSION Y BRASS/ THD 1/4" COMPRESSION WITH LOCKNUTS 2 BRASS/ 1/4" I.D. HOSE 5 BRASS/ NO ADAPTOR-INTEGRAL 5/16-24 THD E ALUMINUM/ THD 1/8" NPT WITH LOCKNUTS (STANDARD) H ALUMINUM/ 1/4" NPT (STD WITH FLOW CONT.) 6 ALUMINUM/ NO ADAPTOR-INTEGRAL 5/16-24 THD C 316 STAINLESS STEEL/ 1/8" NPT F 316 STAINLESS STEEL/ THD 1/8" NPT WITH LOCKNUTS (STANDARD) J 316 STAINLESS STEEL/ 1/4" NPT (STD WITH FLOW CONT.) N 316 STAINLESS STEEL/ THD 1/4" NPT WITH LOCKNUTS R 316 STAINLESS STEEL/ 1/8" COMPRESSION U 316 STAINLESS STEEL/ THD 1/8 COMPRESSION WITH LOCKNUTS X 316 STAINLESS STEEL/ 1/4" COMPRESSION STAINLESS STEEL/ THD 1/4" COMPRESSION WITH LOCKNUTS STAINLESS STEEL/ 1/4" I.D. HOSE STAINLESS STEEL/ NO ADAPTOR-INTEGRAL 5/16-24 THD STAINLESS STEEL/ 1/4" VCR K KYNAR 1/4" NPT (VALVE SHOULD BE 316 S.S. MATERIAL) 7

8 Models 1350E and 1355E Data Sheet Table 6 Ordering Information and Model Code Continued VALVE TYPE A VALVE PLUG B BRASS - LOW FLOW C BRASS - MEDIUM FLOW D BRASS - HIGH FLOW E 316 STAINLESS STEEL - LOW FLOW F 316 STAINLESS STEEL - MEDIUM FLOW G 316 STAINLESS STEEL - HIGH FLOW H NRS-BRASS #1 J NRS-BRASS #2 K NRS-BRASS #3 L NRS-BRASS #4 M NRS-BRASS #5 N NRS-BRASS #6 P NRS STAINLESS STEEL #1 Q NRS STAINLESS STEEL #2 R NRS STAINLESS STEEL #3 S NRS STAINLESS STEEL #4 T NRS STAINLESS STEEL #5 U NRS STAINLESS STEEL #6 V TO INTEGRALLY MOUNTED FLOW CONTROLLER W STANDARD VALVE CAVITY - NO VALVE ASSEMBLY OR PLUG X NO VALVE CAVITY (MUST USE CODE 9 BELOW FOR VALVE CAVITY LOCATION) VALVE CAVITY LOCATION CONNECTION ORIENTATION 1 INLET IN-BACK, OUT-BACK (STANDARD) 2 INLET IN-BACK, OUT-FRONT 3 INLET IN-FRONT, OUT-BACK 4 INLET IN-FRONT, OUT-FRONT 5 OUTLET IN-BACK, OUT-BACK (STANDARD) 6 OUTLET IN-BACK, OUT-FRONT 7 OUTLET IN-FRONT, OUT-BACK 8 OUTLET IN-FRONT, OUT-FRONT 9 NONE (INLET SIDE) USE WITH CODE X ABOVE IN-BACK, OUT-BACK ACCESSORIES-1,2, OR 3 DIGIT FIELD A NONE B ALUMINUM FLUSH MOUNTING BEZEL C FLUSH PANEL MOUNTING FOR KYNAR METERS E TRIPOD BASE WITHOUT SPIRIT LEVEL J DEGREASE FOR OXYGEN SERVICE L STAINLESS STEEL SIDE PLATES M STAINLESS STEEL SPRING FLOAT STOPS N NIST CERTIFICATION INCLUDES CALIBRATION AND SCALE CHECK (10%, 1350; 5%, 135 Q NO BROOKS IDENTIFICATION Example: 1350EJB9 AAA1A 8