Sand Cast Aluminum Form 7 Conduit Bodies
|
|
- Alexis Benson
- 6 years ago
- Views:
Transcription
1 Sand ast luminum Form 7 onduit odies
2 Sand ast luminum Form 7 onduit odies Superior corrosion protection Thomas & etts is pleased to introduce the new line of Sand ast luminum Form 7 onduit odies featuring the best-in-class orrostall sand cast aluminum alloy material for both our conduit bodies and cast covers. Known world-wide as the most corrosion resistant aluminum alloy this material offers the highest degree of corrosion protection and long lasting performance in extreme environments. fter 1,200 hours of 5% salt fog test, our conduit bodies and cast covers are free of red rust and surface pitting. High performance castings offer a smooth surface in and out. There is no paint that could flake off, which is especially important in applications where contamination is a major concern, such as the food and beverage and pharmaceutical industries. Using stainless steel screws and bonded sealing stainless steel washers for both cast and stamped covers offers additional protection against the devastating effects of corrosion. Neoprene is bonded to the stainless steel washer to provide sealing and to separate the screw and washer from the cover to reduce the risk of galvanic corrosion caused by dissimilar metals. For added convenience, both the stamped and cast covers come standard with gaskets, stainless steel screws and bonded sealing stainless steel washers to reduce inventory and the chance of misplacing gaskets. The cover gaskets are the same as those used for the steel covers on the T& Fittings luekote conduit bodies. overs are interchangeable with our main competitors covers. Unique to the T& Fittings covers, the clips are also made out of aluminum, not steel, which dramatically increases the life span of the product in corrosive environments.
3 Test results T& Fittings covers and two leading competitors after 72-hour 5% salt-fog chamber test The T& Fittings sand cast cover shows no signs of pitting or red rust either inside or out. overs by competitor 1 and ompetitor 2 covers already show obvious signs of red rust around the clips. T& Fittings covers and two leading competitors after 1,200-hour 5% salt-fog chamber test The T& Fittings sand cast covers still shows no signs of pitting or red rust either inside or out. Only salt deposits. ompetitor 1 covers have been heavily affected by red rust inside and out. ompetitor 2 covers have also been heavily affected by red rust both in and out, despite an additional paint layer.
4 Test results T& Fittings conduit bodies and competitor s after 1,200-hour 5% salt-fog chamber test The T& Fittings conduit bodies are free of any pitting inside and out only salt deposits. The T& Fittings conduit bodies display clean threads with only salt deposits. ompetitor 2 conduit bodies show signs of pitting and paint flaking. Product highlights orrostall aluminum alloy material for conduit bodies and cast covers provides the highest level of corrosion protection, with 1,200 hours in salt fog solution at 5% pit free. No additional paint eliminates the risk of flaking and contamination. luminum cover clips ensure superior corrosion protection for covers and eliminate the risk of red rust. Stainless steel screws and bonded sealing stainless steel washers (standard) on cast and stamped covers further increase protection against corrosion. Neoprene is bonded to the stainless steel washer to provide sealing and to separate the screw and washer from the cover to reduce the risk of galvanic corrosion caused by dissimilar metals. overs come standard with gaskets to reduce inventory. oth cast covers and stamped covers available. overs are interchangeable with main competitor covers.
5 Product specifications L Sand ast luminum Form 7 onduit odies at. No. Hub size u. in. Std pack qty UP number L17S 1/2" L27S 3/4" L37S 1" L47S 1-1/4" L57S 1-1/2" L67S 2" L77S 2-1/2" L87S 3" L97S 3-1/2" L107S 4" LL Sand ast luminum Form 7 onduit odies at. No. Hub size u. in. Std pack qty UP number LL17S 1/2" LL27S 3/4" LL37S 1" LL47S 1-1/4" LL57S 1-1/2" LL67S 2"
6 Product specifications LR Sand ast luminum Form 7 onduit odies at. No. Hub size u. in. Std pack qty UP number LR17S 1/2" LR27S 3/4" LR37S 1" LR47S 1-1/4" LR57S 1-1/2" LR67S 2" Sand ast luminum Form 7 onduit odies at. No. Hub size u. in. Std pack qty UP number 17S 1/2" S 3/4" S 1" S 1-1/4" S 1-1/2" S 2"
7 Product specifications LU Sand ast luminum Form 7 onduit odies at. No. Hub size F u. in. Std pack qty UP number LU17S 1/2" LU27S 3/4" LU37S 1" LU47S 1-1/4" LU57S 1-1/2" LU67S 2" F T Sand ast luminum Form 7 onduit odies at. No. Hub size u. in. Std pack qty UP number T17S 1/2" T27S 3/4" T37S 1" T47S 1-1/4" T57S 1-1/2" T67S 2" T77S 2-1/2" T87S 3" T97S 3-1/2" T107S 4"
8 Product specifications T Sand ast luminum Form 7 onduit odies at. No. Hub size u. in. Std pack qty UP number T17S 1/2" T27S 3/4" T37S 1" T47S 1-1/4" T57S 1-1/2" T67S 2" X Sand ast luminum Form 7 onduit odies at. No. Hub size u. in. Std pack qty UP number X17S 1/2" X27S 3/4" X37S 1" X47S 1-1/4" X57S 1-1/2" X67S 2"
9 Product specifications overs for Sand ast luminum Form 7 onduit odies at. No. Hub size Material Std pack qty UP number 170S 1/2" S 3/4" S 1" S 1-1/4" S 1-1/2" Stamped aluminum S 2" S 2-1/2" - 3" S 3-1/2" - 4" FS 1/2" FS 3/4" FS 1" FS 1-1/4" FS 1-1/2" Sand cast aluminum FS 2" FS 2-1/2" - 3" FS 3-1/2" - 4" Note: overs include gasket and stainless steel screws and washers. Sand cast aluminum Stamped aluminum
10 Notes
11 Notes
12 Visit the T& world of electrical product solutions Visit our web site for more information about Thomas & etts solutions and our newest products. For a user-friendly catalog and competitive part number search, application and technical support and other useful information, go to: Industry codes and specifications ll Thomas & etts products meet or exceed applicable industry specifications or codes which are detailed in the appropriate T& product literature. I NSI I Online library Thomas & etts offers free download of two- and threedimensional models of many of its products in more than 90 native formats at: Please ask your Thomas & etts sales representative for a complete catalog of quality Thomas & etts electrical products or visit us at For customer service, call For technical questions, call Thomas & etts orporation. ll rights reserved. Printed in the U.S.. 12/16 GM7679 Thomas & etts orporation lectrification Products ivision of 8155 T& oulevard Memphis, TN
Sand Cast Aluminum Form 7 Conduit Bodies
Sand ast luminum Form 7 onduit odies Sand ast luminum Form 7 onduit odies Superior corrosion protection Thomas & etts is pleased to introduce the new line of Sand ast luminum Form 7 onduit odies featuring
More informationMaterial/Finish Aluminum Copper-free aluminum (less than 4/10 of 1%) Electrostatically applied powder coating
3 LR Type Applications To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. eatures Intermateability UL Listed and CSA Certified interchangeability
More informationALUMINUM OR IRON CONDUIT BODIES
7 SERIES ALUMINUM OR CONDUIT BODIES LR Type Applications To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. Features Intermateability UL Listed
More informationIRON CONDUIT BODIES 5-5/16 (135) 6-9/16 (167) 7-9/16 (192) 8-7/16 (214) 10-3/8 (264) 12-3/8 (314) 15-5/8 (397) 15-5/8 (397)
KILLARK C Type Applications To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. Features Completely interchangeable with competative bodies, gaskets,
More informationALUMINUM OR MALLEABLE IRON CONDUIT BODIES
O SERIES / 5 SERIES ALUMINUM OR MALLEABLE CONDUIT BODIES Suitable for wet locations when used with gasketed Federal Specification W-C-586D/A-A 50563. Suitable for use in hazardous location applications
More information1-1/2 LB FM7 CND BD ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED
LB57 1-1/2 LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category LB57 Appleton/Oz Gedney Conduit Body, Electro Zinc Plated Dichromate Epoxy Powder Coated
More informationFS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent
More informationGrounding & Bonding A Global Leader in Innovative...
Grounding & Bonding A Global Leader in Innovative... Wire & Cable Management Cable Protection Systems Power Connection & Control Safety Technology Thomas & Betts Solution Sets An improperly installed or
More informationMogul Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
Applications To provide access to large and heavy conductors for pulling, splicing, maintenance and future changes / upgrades Allows connection of straight conduit runs, branch conduit runs and 90 bends.
More informationExpansion & Deflection Fittings. SOLUTIONS for the Construction Industry
Expansion & Deflection Fittings SOLUTIONS for the Construction Industry TTINGS FI ST D LO C AF/AF8 SERIES e st d, in M a c h e d, As d in D e s i g n e d, b le the Casted Body with NPT hub size se m Ca
More informationCABLE TRAY SOLUTIONS OIL & GAS
CABLE TRAY SOLUTIONS OIL & GAS Maximize Returns with Innovative System Solutions Oil & Gas Industry The oil and gas industry demands performance from components used in electrical infrastructure. Thomas
More informationPatented! A46N - Aluminum (Non-Ferrous Metals) Aluminum oxide grain Thin.045 width Soft bond for aggressive cutting without loading GRINDING CUTTING
60S - General Purpose So unique it has a patent Special aluminum oxide grain Hard bond for extremely long life Fast, burr-free cutting Patented! Ferrous and/or non-ferrous metals See pages 30-31 for Type
More informationDIVISION 5 METALS Metal Fabrication
DIVISION 5 METALS 05500 Metal Fabrication SECTION 05500 PART 1 GENERAL 1.1 INTENT OF SECTION.1 This section specifies requirements for the supply and installation of all miscellaneous metal fabrications,
More informationFlush Service Floor Boxes
Flush Service Floor Boxes PRODUCT SPECIFICATION: Flush Service Floor Boxes PART 1: Overview Considerations when writing specifications: Floor boxes are manufactured in various sizes, configurations and
More informationOverview Better by Design
Overview Better by Design Ocal-Blue PVC-coated conduit and fittings represent a complete corrosion-protection package for your entire conduit system. This extensive product line includes the largest number
More informationThomas & Betts Solution Sets. Grounding & Bonding. Corrosion & Harsh Environment Protection. Power Quality, Efficiency & Reliability
Grounding & Bonding Thomas & Betts Solution Sets An improperly installed or grounded electrical system can cause power failure, which often leads to significant safety, production and operational concerns.
More informationAFC Fittings Product Catalog AFC FITTINGS. Product Catalog
F Fittings Product atalog F FITTINGS Product atalog Since 1994 F Fittings has been providing good old fashion quality. From connectors for Type M, and HF cables, to flexible metal conduit and liquid-tight
More informationService Entrance Cable Fittings
Suggested Specifications for Service Entrance Fittings All service fittings shall be approved for the purpose by a nationally recognized testing laboratory, inspection agency or product evaluation organization.
More informationThermal Diffusion Galvanizing
Engineering Test Report M-571 Thermal Diffusion Galvanizing For Pole Line Hardware Revision D 11.17.2017 Added further Corrosion Test results and Abrasion Test results Prepared by 1. Introduction to Thermal
More informationAir-Operated Double Diaphragm Pumps
Air-Operated Double Diaphragm Pumps FIRST IN QUALITY Total Quality Management is ingrained in the Iwaki Air brand of Air-Operated Double Diaphragm (AODD) pumps, which are manufactured under stringent ISO
More informationEpoxy Coated F.R.L.Units
093-001I Issued: ep 09 orporation of merica 10100 oulevard oblesville, 46060 www.smcusa.com.. Information poxy oated.r..nits 1/31/-***-*-X1 //-***-*-X40 R//-***-*-X4 //-***-*-X40 //-***-*-X4 //-***-*-X13
More informationSpecifications Electrical Metallic Tubing (EMT)
T& Fittings Specifications Electrical Metallic Tubing (EMT) Ref. CEC Rule 12-000 not exceeding 750 Volts Electrical Metallic Tubing (EMT) is similar to rigid steel conduit but is much lighter, weighing
More informationT&B Fittings. Industrial Fittings. Liquidtight Flexible Metal Conduit Fittings. Specifications
T& Fittings Specifications Ref. E Rule 12-1300 Liquidtight flexible metal conduit is a raceway of circular cross section having an outer liquidtight nonmetallic, sunlight resistant jacket over a flexible
More information(800) fax (708) Available From: Allied Tube & Conduit Printed in U.S.A. 7/98 ATC-L
A2106 Allied Tube tsteel he recycled material A1654 ISO 9002 (800) 882-5543 fax (708) 339-2399 Available From: Allied Tube & Conduit Printed in U.S.A. 7/98 ATC-L-1453-4 ONE What is Gatorshield...and Why
More informationHot-Dip Galvanized Fabrication Considerations
Hot-Dip Galvanized Fabrication Considerations TECHNICAL BULLETIN JANUARY 27, 2016 Forming Hot-dip galvanized sheet can be formed almost as readily as uncoated cold rolled sheet. It can be formed in a variety
More informationExtreme Temperature Protection A Global Leader in Innovative...
Extreme Temperature Protection A Global Leader in Innovative... Wire & Cable Management Cable Protection Systems Power Connection & Control Safety Technology Excessive heat or cold can wreak havoc on an
More informationCAPACITOR DISCHARGE(CD)
1 CAPACITOR DISCHARGE(CD) The capacitor discharge CD Pin is a Low Carbon Steel, Stainless Steel or Aluminum weld pin that is ideal to apply with pin welding or stud welding equipment. Manufactured with
More informationt y p e V S A S E W A G E P U M P
Pe r fo r m a n ce C h a r t 65 6 55 45 4 35 3 25 2 12 11 1 / 2 11 1 1 / 2 1 9 1 / 2 6% 7% 76% 7 1 HP 1/2 HP HP 76% 7% 6% C u r v e P a g e V S A - 5 1 1 5 R P M M O D E L : V S A - 6 H D I S C H A R G
More informationMetal Framing Channels Overview
New Trivalent Galv-Krom Finish Is RoHS Compliant Thomas & Betts is proud to introduce the new and improved Trivalent Galv-Krom finish. Galv-Krom finish is a combination of.5 mils electro-plated Zinc and
More informationMICROFUSION Maintenance Welding Alloys DM - 6
MICROFUSION STEEL DM - 6 FERRITE BALANCED ALLOY FOR ALL STEELS GIVING SUPER STRENGTH Provides exceptional strength A non-cracking alloy for all steels Special "Ionized Arc Transfer drastically reduces
More informationRed Dot. Rigid Fittings. Table of Contents
Table of Contents Conduit Unions Hazardous Locations... C2 C3 Conduit Fittings Hazardous Locations... C4 C5 Sealing Fittings Hazardous Locations... C6 C7 Conduit Hubs Raintight for Threaded Rigid Conduits...
More informationOptics Mounting Lamping Finish Voltage Options. T6 Metal Halide* H039T6 1 39wT6 H070T6 2 70wT6. H w H070 70w H w
Quadro Project: Type: Qty: QD _ Series Optics Mounting Lamping Finish Voltage _ Option Pole Series Height Finish Options Series QD Quadro Optics Mounting Lamping Finish Voltage Options MA Type III MTR
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationWhy wait until catastrophe strikes? Prevent the Chain Reaction of Equipment Wear, Maximize Heat Transfer, Protect Equipment Life
Why wait until catastrophe strikes? Prevent the Chain Reaction of Equipment Wear, Maximize Heat Transfer, Protect Equipment Life IAS has pioneered and utilizes a new generation high-velocity, chemical
More informationGalvanic Corrosion Prevention Guide for Water Cooling Systems
WATER COOLED DEVICES Galvanic Corrosion Prevention Guide for Water Cooling Systems November 2017 White Paper Created by Helen E. Kane, Advanced Energy Industries, Inc. Water Cooled Devices Abstract This
More informationTHOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
More informationPROCESS CHECK REPORT
Company: Process Title Process Check Report Ref. No: Raytheon Process Auditor(s): Date Of Process Audit: PASSVIATION OF CORROSION RESISTING STEELS & NICKEL - BASED ALLOYS. Summary: Conclusion: Distribution:
More informationCorrosion Resistance of Aluminum
All Aluminum Technical Traits of Great Passion Corrosion Resistance of Aluminum An All Aluminum Technical Journal January 2008 Physical properties are defined by ASTM testing standards, The Aluminum Association
More informationINDEPENDENT PIPE PRODUCTS, INC.
INDEPENDEN PIPE PRUCS, INC. BEER BY DESIGN Convoluted Ductile Iron & Stainless Steel Rings ASME / ANSI B.5, B.47Ser.A CL150 B.1 CL5 AWWA C7 B,D & E Design Information Van Stone Style Flanges have been
More informationSECTION. Trellis and Pergola
10 73 00 SECTION Trellis and Pergola PART 1 GENERAL 1.1 SECTION INCLUDES A. Pre-engineered, pre-finished Pergola system. B. Pre-engineered, pre-finished Trellis system. 1.2 RELATED SECTIONS A. Section
More informationSpecification Section Storefront Systems has been revised. Omit previously issued Storefront section.
December 28, 2018 ADDENDUM NO. 2 To: Re: Bidders Corey Pitts, NewQuest Properties This Addendum forms a part of the contract documents identified above. Acknowledge the receipt of this Addendum on the
More informationElectrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
More informationCUP - Sealed blind rivet
made of stainless steel A2 AISI 304 or made of stainless steel A4 AISI 316 with mandrel made of stainless steel Maximum corrosion protection! Survey on CUP sealed blind rivet of stainless steel Increasing
More informationSikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour
GLUING AND RIVETING Sikaflex 221, black Elastic Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour connecting and overlapping joints, apron panels, trims, floor assemblies
More informationDimensions in Millimeters (Inches) A Bushing Diameter. B Bushing Height
Insulated Grounding for Threadless and Threaded RM IM GI-LS- and I-LS- Series - with luminum Lay-In-Lug for opper or luminum onductors. NE/E: pplications GI-LS Series insulated bushings fasten and ground
More informationEvaluating actuators for washdown in food & beverage applications:
Evaluating actuators for washdown in food & beverage applications: Materials, design, fabrication and maintenance affect actuator performance and compliance with food safety guidelines. By Aaron Dietrich
More informationFor Food & Beverage Facilities
For Food & Beverage Facilities Corrosion Resistant Durable Lowest Cost Of Ownership Easy To Install No Special Tools 2012 Product Catalog A division of calbrite.com The Leader in Stainless Steel Conduit
More informationTHOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
More informationMyers Hubs. Applications: Features: Standard Materials: Certifications and Compliances: Standard Finishes: Options: Conduit Hubs.
pplications: Features: Certifications and Compliances: Standard Materials: Standard Finishes: Options: Description Suffix CP 56 www.crouse-hinds.com US: 1-866-764-5454 CN: 1-800-265-0502 Copyright 2015
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationTechnology Applications Group, Inc. Grand Forks, North Dakota. TAGNITE The Ultimate Coating for Magnesium Sand Castings
Technology Applications Group, Inc. Grand Forks, North Dakota TAGNITE The Ultimate Coating for Magnesium Sand Castings TAGNITE Briefing Overview Briefing Overview Review of Immersion TAGNITE Review of
More informationULTRA WP. Chains & Sprockets. U.S. Tsubaki, Inc.
Roller Chain Division Improved! Stop corrosion BEFORE it eats away your profits! ULTRA WP Chains & Sprockets Corrosion Cost Cutters The original corrosion resistant alternative to stainless steel just
More informationHeight Finish Pole Options. Series Optics Mounting Lamping Finish Voltage. Metal Halide HPS. H w H070 70w H w H w
Series Optics Mounting Lamping / Wattage Finish Voltage SAMG Saturn Magnum MR Type V MTR* 6 Refractor Refractor is an integral part of the fixture and is not an option. Project: Type: SAMG MR Series Optics
More informationCustomer Owned Meter Enclosures for Self-Contained Watthour Meters
Revision No. 4 Page 1 of 15 SPECIFICATION Page 2 of 15 RECORD OF SPECIFICATION APPROVALS: This Specification is approved for the inclusion of subject products on the Florida Meter Group s Approved Metering
More informationSECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
More informationMIL-L-26764B 4 March 1970 SUPERSEDING MIL-L-26764(ASG) 12 December 1963 MILITARY SPECIFICATION
4 March 1970 SUPERSEDING MIL-L-26764(ASG) 12 December 1963 MILITARY SPECIFICATION LIGHT, MARKER, AIRPORT APPROACH, HIGH INTENSITY, TYPE MB-2 This specification has been approved by the Department of the
More informationProduct / Application Highlight
Product / Application Highlight With the increase of precision machine technology the demand for specialized bearings that provide high performance and improved running life has increased substantially.
More informationTECHNICAL BULLETIN. The following photographs were taken prior to samples being subjected to testing. J&L BOSS HOG EXTRA Improved Floor Panel
TECHNICAL BULLETIN CORROSION RESISTANCE TESTING ON HOG FLOORING: J&L vs. the Competition There are numerous manufacturers today providing hog flooring for agricultural applications. Each manufacturer offers
More informationCHAPTER 4 PIPES. Prof. Dr. Uğur Atikol
CHAPTER 4 PIPES Prof. Dr. Uğur Atikol History Materials: Lead used to be very popular material due to its availability, durability and ease of working. It had environmental problems Industrial developments
More informationB. Stipulated Price (Lump Sum). If Contract is Stipulated Price Contract, payment for work is in this Section is included in total Stipulated Price.
Section 02526 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Water meters, submeters, and fire service meters. 1.02 MEASUREMENT AND PAYMENT A. Unit Prices 1. Measurement for water meters is on unit price
More informationINNOVATIVE GRINDING SOLUTIONS FOR THE METAL WORKING INDUSTRY
INNOVATIVE GRINDING SOLUTIONS FOR THE METAL WORKING INDUSTRY Experience the WALTER Advantage Professionals in the metal fabricating and finishing industry know that when it comes to grinding, Walter Surface
More informationSEASTROM Manufacturing Co., Inc Seastrom Street Twin Falls, Idaho Fax (208)
MATERIAL CHARACTERISTICS - METAL Aluminum 2024 Aircraft Grade 1/3 the weight of steel Heat treat to increase hardness Good electrical conductivity (30% of copper) Good heat conductivity (70 btu/hr/ft²/
More informationREA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
Grounding BURNDY Products E-44 TYPE GRC HIGH STRENGTH GROUND ROD CLAMP For Copper Cable to Rod High copper alloy ground connector for joining a range of cable to copper clad, galvanized steel, and stainless
More informationFeatures: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles. Compliance: CSA Listed. B Index. February Master Index. Cat. No.
FS and FD Cast Device Boxes: Malleable Iron, Aluminum B Features: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles Compliance: CSA Listed B-2 B-3 FS and FD Cast Device Boxes: Index Page Description
More informationFitTech UP171F ELLIPTICAL (FOOTING) UP171I ELLIPTICAL (IN GROUND) UP171S ELLIPTICAL (SURFACE) Parts List
ELLIPTICAL BASE COVER DESCRIPTION FOOTBUCK WELD ASS'Y HARDWARE COMPLETE HARDWARE COMPLETE HARDWARE COMPLETE /" ANCHOR ROD 3/" x " HEX HEAD CAP SCREW 3/" WEDGE ANCHOR 3/" ANCHOR BOLT 3/" FLATWASHER (" O.D.)
More information200 Series In-Slab Pool Fittings
230 Series nti-vortex Plate 2-2 231 Series Sump 2-3 234 Series Sump 2-4 236 Series Sump 2-5 253 Series Overflow 2-6 255 Series Overflow/Drain 2-7 261 Series Vacuum Fitting 2-8 263 Series Eyeball Fitting
More informationTHE NEXT GENERATION CUSH-A-BLOCK ROOFTOP SUPPORT SYSTEMS
THE NEXT GENERATION CUSH-A-BLOCK ROOFTOP SUPPORT SYSTEMS Connected.Simply www.zsi-foster.com Cush-A-Block Features: 100% Recycled Rubber Qualifies for LEED Credits Meets the Buy America Act and American
More informationAMFICO AMERICAN FITTINGS. Use ONE Fitting on ALL Conduits. It s EMT, It s Rigid, It s IMC, It s UL Approved, It s Steel, It s American.
Use ONE Fitting on ALL Conduits It s EMT, It s Rigid, It s IMC, It s UL Approved, It s Steel, It s American. AMFICO 2 1/2 to 4 EMT, Rigid and IMC UL Listed Dual Rated 1/2-4 Connectors, Couplings, Connectors
More informationCORROSION PROTECTION INDEX
CORROSION PROTECTION 71862 7 Table of Contents Page Specifications............................... 7-1 Special Tools............................ 7-1 Lubricants, Sealers, and Adhesives......... 7-1 Wiring
More informationAmerican Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
More informationAMERICAN DARLING MARK
2 12 250 p.s.i.g. SERIES 2500 RESILIENT WEDGE GATE VALVE AMERICAN FLOW CONTROL AMERICAN DARLING MARK 73 2 FIRE HYDRANT It s What We Know. CONSTRUCTION UPPER O-RING SEALS can be replaced while the valve
More informationSECTION MISCELLANEOUS METALS THIS SECTION TO BE INCLUDED IN SUB BID FOR SECTION MISCELLANEOUS AND ORNAMENTAL IRON
SECTION 055000 THIS SECTION TO BE INCLUDED IN SUB BID FOR SECTION 050001 MISCELLANEOUS AND ORNAMENTAL IRON PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a
More informationSolar Attachment. for Flat Roofs. Roof Mounts. Pipe & Conduit Supports. Roof Repair Tape. Roofing Fasteners
Solar Attachment for Flat Roofs Roof Mounts Pipe & Conduit Supports Roof Repair Tape Roofing Fasteners 35 years working with commercial roof systems Relationships with leading roof system man u factu rers
More informationMECHANICAL PACKING AND GASKET CATALOG ENVIRONMENTALLY FRIENDLY SEALING SOLUTIONS
MECHANICAL PACKING AND GASKET CATALOG ENVIRONMENTALLY FRIENDLY SEALING SOLUTIONS Valve Sealing High Performance Mechanical Packing and Gasket Catalog Valve Sealing System A complete approach to valve sealing
More informationSECTION ROOF SPECIALTIES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 71 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationWorld Class Bellows Seal Valves
World Class Bellows Seal Valves Fugitive Emissions Sealing High Cycle Bellows In-Line Servicing High Flow Capacity Conval Bellows Seal Valves meet all of the rigorous requirements of MSS SP-117, ensuring
More informationEnvironmental concerns include the presence of oxygen, moisture (water), contact with dissimilar metals, and chemicals.
Construction Concern: Corrosion Article and photos by Gregory Havel May 9, 2018 Corrosion of a metal can be defined as its degrading from a reaction with its environment. This degradation can cause weakening
More informationNAVSEA STANDARD ITEM. 2.1 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods
NAVSEA STANDARD ITEM ITEM NO: 009-55 DATE: 30 JUL 2010 CATEGORY: II 1. SCOPE: 1.1 Title: Regulating/Reducing Valve; repair 2. REFERENCES: 2.1 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing
More informationCorrosion Resistance of Alternative Reinforcing Bars: An Accelerated Test
Corrosion Resistance of Alternative Reinforcing Bars: An Accelerated Test Final Report 24 July 2006 WJE No. 2006.0773 Prepared for: CRSI Prepared by: Wiss, Janney, Elstner Associates, Inc. CORROSION RESISTANCE
More informationOverview Steel City. Metallic Boxes and Covers. Advantages of Steel City. Boxes and Covers. Boxes & Covers Steel City Metallic Boxes
Steel City Metallic Boxes and Covers Steel City is the industry-leading product line of metallic switch and outlet boxes used in electrical construction. Since 1904, Steel City products have symbolized
More informationCORROSION & ITS CONTROL -Content. Introduction Classification Galvanic series Factors affecting Protection methods Summary
CORROSION & ITS CONTROL -Content Introduction Classification Galvanic series Factors affecting Protection methods Summary 3 Learning Objectives At the end of the chapter the learner will be able to; 1.
More informationCr-FREE METALLIC-CERAMIC COATINGS
Cr-FREE METALLIC-CERAMIC COATINGS ASETS Defense 2014 Fort Myer, VA, November 18-20, 2014 Bruce McMordie Coatings for Industry 319 Township Line Road Souderton, PA 18756 Report Documentation Page Form Approved
More informationSECTION C. Water Infiltration: Provide manufactured cupolas and dormers that do not allow water infiltration to cupola and dormer interiors.
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Manufactured exterior cupolas. 2. Manufactured dormers. 3. Historical locomotive weather Vane. 1.2 PERFORMANCE REQUIREMENTS A. General:
More informationElectrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Cast
More informationBuilding Your Visions
Ferguson C EAP Curtain Wall Systems Ferguson-EAP 130HP Series High Performance Curtain Wall System Ferguson s 130HP curtain wall system was developed for high performance double, triple, unique acoustical
More informationMAXI-TUBE IS AN INNOVATIVE ZINC-ALLOY COATED STEEL SECTION WITH A COATING THAT SHOWS HIGH CORROSION RESISTANCE IN AGGRESSIVE ENVIRONMENTS*
MAXI-TUBE IS AN INNOVATIVE ZINC-ALLOY COATED STEEL SECTION WITH A COATING THAT SHOWS HIGH CORROSION RESISTANCE IN AGGRESSIVE ENVIRONMENTS* we ll see it through we ll see it through we ll see it through
More informationFitTech UP166F CHEST PRESS (FOOTING) UP166I CHEST PREES (IN GROUND) UP166S CHEST PRESS (SURFACE)
CHEST PRESS BASE COVER DESCRIPTION FOOTBUCK WELD ASSEMBLY HARDWARE COMPLETE HARDWARE COMPLETE HARDWARE COMPLETE /" ANCHOR ROD 3/" x " HEX HEAD CAP SCREW 3/" WEDGE ANCHOR 3/" ANCHOR BOLT 3/" FLATWASHER
More informationProject: Type: Qty: Optics. Series. Reflector Mounting Lamping Finish Voltage Options BLC - S BLC-L 21 1 /4" 36 1 /4" 3 1 /2" O.D.
Project: Type: Qty: Series Optics Mounting Lamping Finish Voltage Options Pole Series Finish Pole Options Series Optics Mounting Lamping Finish Voltage Options BLC Beta Lantern L S Flat Glass Lens Sagged
More information3YR. Direct Drive Pumps. Outdoor Living. Outdoor Living Water Features & Pond Products. PE-Series
3YR WRRNTY P-Series esigned to operate continuously, direct-drive pumps produce greater starting torque and more pressure than comparable mag-drive pumps. irect-drive pumps are ideal for use in filtration,
More informationPVC COATED RIGID METAL CONDUIT KK Reasons to Choose KORKAP NO EQUAL!
PVC COATED RIGID METAL CONDUIT KK-111 7 Reasons to Choose KORKAP NO EQUAL! Product Performance 1 Reason One Seven reasons why you should trust the proven value of KorKap PVC-coated galvanized rigid conduit.
More informationAbsolutely. Positively. Precise.
1 Absolutely. Positively. Precise. Troemner s Philosophy Calibration & Traceability Philosophy Troemner is the world s largest independent mass calibration company. Our philosophy is to provide the highest
More informationA. Pre-Installation Conference: Conduct conference at [project site] <insert location>.
SECTION 074213.23 METAL COMPOSITE MATERIAL WALL PANELS PART 1 GENERAL 1.1 SUMMARY A. Exterior cladding consisting of formed metal composite material (MCM) sheet, secondary supports and anchors to structure,
More informationl MATERIAL SPECIFICATIONS
SECTION 4.5 PAGE 1 / 5 l DESCRIPTION The UCAN Scru-it masonry anchor is manufactured to strict specifications from high quality steel. The proprietary, UCAN designed, scalloped thread cuts deep grooves
More informationSECTION 2 DIVISION 05 METALS
SECTION 2 DIVISION 05 METALS DIVISION 5 - METALS Note: This is a guide for Designers only. Contents shall not be used in lieu of specifications as part of the Designer s Contract Documents. GENERAL DESIGN:
More informationThermal Diffusion Galvanizing
Thermal Diffusion Galvanizing Kortick Manufacturing Company TDG Findings Thermal diffusion galvanizing (TDG) is a method of applying a uniform, sacrificial, zinc-iron or zinc aluminum alloy coating using
More informationACTION CAN RANGE. Premium Quality Fantastic Value FOOD GRADE. Never ask a professional to use anything less NOW AVAILABLE
Never ask a professional to use anything less FOOD GRADE RANGE NOW AVAILABLE Premium Quality Fantastic Value Never ask a professional to use anything less RP-90 Rapid Penetrating Oil AC-90 Multipurpose
More informationBULLETIN TECHNICAL SERVICES DEPARTMENT. No. 96 Aug (Rev1-9/16/15) (Rev2 03/15/18)
TECHNICAL SERVICES DEPARTMENT BULLETIN UL and NEC Requirements for Corrosion Protection of Galvanized Steel Conduit and Electrical Metallic Tubing No. 96 Aug. 2008 (Rev1-9/16/15) (Rev2 03/15/18) When selecting
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
More informationAMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE CONSTRUCTION DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as
More information