Features: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles. Compliance: CSA Listed. B Index. February Master Index. Cat. No.

Size: px

Start display at page:

Download "Features: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles. Compliance: CSA Listed. B Index. February Master Index. Cat. No."

Jemima Lloyd
5 years ago
Views:

1 FS and FD Cast Device Boxes: Malleable Iron, Aluminum B Features: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles Compliance: CSA Listed

2 B-2

3 B-3 FS and FD Cast Device Boxes: Index Page Description 4-6 Single-Gang Device 4 Features 7, 8, 9 Covers 9 Covers, Locking 6 Dimensions 9 Plugs 9 Plugs, Locking 9, 14 Plug Receptacle Covers 10 Two-Gang Device 11 Covers 10 Dimensions 12 Three-Gang Device 12 Covers 12 Dimensions 13 Four-Gang Device 13 Covers 13 Dimensions 13 Gaskets Hubless Device 17 Dimensions 18, 19 Hub Arrangements 20 Pedestal Mounted Receptacles/Breakers

Allow connections for branch conduit runs. FS and FD blank bodies for special conduit-entrance arrangements.

4 B-4 FS and FD Cast Device Boxes: Malleable Iron, Aluminum Applications Accommodate wiring devices such as switches and receptacles. Provide excellent service in areas where boxes are subject to rough usage. Serve as pull boxes for conductors. Permit access to conductors for maintenance. Provide openings for making splices. Allow connections for branch conduit runs. FS and FD blank bodies for special conduit-entrance arrangements. Features: All FS and FD Boxes Corrosion-resistant ideal for indoor and outdoor installations. Weatherproof, raintight and dust-tight when used with cast gasketed covers. FS and FD boxes take standard flush wiring devices. FD boxes take devices exceeding 1-5/8 in depth under fastening ears. Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock. Both malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit. Accurately tapped, tapered threads for tight, rigid joints, ground continuity. Complete selection of covers, receptacles, plugs, gasket and accessories. Covers have captive stainless steel screws to speed installation, prevent freezing of screws. Ground screw at top of box for easy access. Features: Cast Hub Boxes Available in single, two and three gang and tandem. Smooth, rounded integral bushing in each hub protects conductor insulation. Features: FD Blank Bodies for Brazed Hubs or Drill and Tapped Entries Available in single, two, three and four gang boxes. Drill and tapped entries. Brazed threaded hubs for threaded conduit from 1/2" thru 1-1/2" and brazed union hubs from 1/2" thru 1-1/4". Smooth, rounded integral bushing in each hub protects conductor insulation. Ground screw at top of box for easy access. Standard Materials Cast Hub Device Boxes and Boxes for Drilling and Tapping: malleable iron or copper-free (4/10 of 1% max.) aluminum. Brazed Hubs: malleable iron. Covers: malleable iron, steel, or copper-free (4/10 of 1% max.) aluminum. Standard Finishes Malleable Iron Device Boxes: triplecoat (1) zinc electroplate, (2) dichromate, and (3) aluminum polymer enamel. Aluminum Device Boxes: aluminum polymer enamel. Malleable Iron Covers with Gaskets: triple-coat (1) zinc electroplate, (2) dichromate, and (3) aluminum polymer enamel. Steel Covers: zinc electroplate. Aluminum Covers: aluminum polymer enamel. Compliances CSA approved. Reference Data When ordering drilled and tapped openings or brazed hubs for blank bodies, refer to Ordering Information pages. Gasket is designed so that it wraps around ridge top of Appleton aluminum or malleable iron device box. Result is a positive seal against moisture.

5 B-5 FS and FD Single-Gang Cast Device Boxes: Malleable Iron, Aluminum FERROUS ALLOY COPPER-FREE ALUMINUM STD. Catalogue Catalogue ILLUSTRATION SIZE PKG. Number Wt. lbs. Number Wt. lbs. 1/2 20 FS FS-1A.64 3/4 20 FS-2 Shallow 2.25 FS-2A Shallow.75 } } 1 20 FS FS-3A.64 1/2 10 FD FD-1A.90 3/4 10 FD-2 Deep 2.60 FD-2A Deep.92 } } 1 10 FD FD-3A.94 1/2 20 FSA-1 Shallow 1.70 FSA-1A Shallow.57 3/4 20 FSA-2 } 1.60 FSA-2A }.58 1/2 10 FDA-1 Deep 2.10 FDA-1A Deep.70 3/4 10 FDA-2 } 2.00 FDA-2A }.67 1/2 20 FSC FSC-1A.70 3/4 15 FSC-2 Shallow 2.40 FSC-2A Shallow.80 } } 1 15 FSC FSC-3A.70 1/2 10 FDC FDC-1A.94 3/4 10 FDC-2 Deep 2.80 FDC-2A Deep.94 } } 1 10 FDC FDC-3A /2 20 FSCC-1 Shallow 1.70 FSCC-1A Shallow.57 3/4 15 FSCC-21* } 2.20 FSCC-21A* }.74 1/2 20 FSCT FSCT-1A.84 3/4 15 FSCT-2 Shallow 2.50 FSCT-2A Shallow.84 } } 1 15 FSCT FSCT-3A.75 1/2 10 FDCT FDCT-1A /4 10 FDCT-2 Deep 2.80 FDCT-2A Deep.94 } } 1 10 FDCT FDCT-3A 1.03 } Deep } Deep 1/2 10 FDD FDD-1A.74 3/4 10 FDD FDD-2A.77 3/4 15 FSL-2 Shallow 2.34 FSL-2A Shallow.78 Dimensions on page 6, Covers on pages 7, 8 & 9. Use FD Unilets for wiring devices exceeding 1-5/8" in depth under fastening ears. Maximum copper content less than 4/10 of 1%.

6 B-6 FS and FD Single-Gang Cast Device Boxes: Malleable Iron, Aluminum FERROUS ALLOY COPPER-FREE ALUMINUM STD. Catalogue Catalogue ILLUSTRATION SIZE PKG. Number Wt. lbs. Number Wt. lbs. } Shallow } Shallow 1/2 20 FSS FSS-1A.60 3/4 20 FSS FSS-2A.60 } Shallow } Shallow 1/2 15 FST FST-1A.82 3/4 15 FST FST-2A FDT-3 Deep 3.20 FDT-3A Deep 1.07 Dimensions for FS & FD Single Gang Devices } Shallow } Shallow 1/2 15 FSX FSX-1A.91 3/4 15 FSX FSX-2A.78 1/2 10 FDX FDX-1A /4 10 FDX-2 Deep 3.00 FDX-2A Deep 1.06 } } 1 10 FDX FDX-3A 1.17 Hub A B C D E Size FS FD 1/2 3/4 5/8 1-3/ /4 1-3/8 3/4 3/4 3/4 1-3/ /4 1-3/8 1 7/8 7/8 1-1/ /4 1-3/8 Covers on pages 7, 8 & 9. Use FD Unilets for wiring devices exceeding 1-5/8 in depth under fastening ears. Maximum copper content less than 4/10 of 1%.

7 B-7 FS and FD Single-Gang Cast Device Boxes: Malleable Iron, Aluminum Catalogue Std. Wt. lbs. ILLUSTRATION Number Description PKG. Per 100 Single Gang Covers FS-4* Blank Cover, Steel Electrogalvanized FS-5* Round Receptacle Cover, Steel Electrogalvanized. Hole dia. 1-7/16" FS-6* Duplex Receptacle Cover, Steel Electrogalvanized FS-8* Round Receptacle Cover, Steel Electrogalvanized. Hole dia. 1-5/8" FS-9* Tumbler Switch Cover, Steel Electrogalvanized **FSK-ITS-G Tumbler Switch Cover, Steel Electrogalvanized **FSK-1J Steel Cover for Pilot Lamp (with Ruby Jewel ) Other colour Jewels can be furnished if specified on order: Amber, Green & Opal Single Gang Vaportight Covers FS-100g Blank Cover, Ferrous Alloy Standard Toggle Switch and Receptacle Covers Copper-Free Aluminum FS-10g Spring Door Type with 1-7/16" dia. hole in housing FS-70g Spring Door, Duplex Receptacle FS-80g Double Spring Door, Duplex Receptacle 25 FS-128 External Operation of Tumbler Switch. Push Pull Operation ON or OFF * Available in Aluminum: Add suffix A to Catalog No. ** Also for use with multiple gang Unilets with individual cover openings, page B-17. *** Cadmium Finish. Other colour jewels can be furnished if specified on orders: Amber, Green and Opal. Maximum copper content less than 4/10 of 1%.

8 B-8 FS and FD Single-Gang Cast Device Boxes: Malleable Iron, Aluminum Catalogue Number Malleable Iron Aluminum Description Ridge Top Ridge Top Cast Covers Only Weatherproof Furnished with Gasket and stainless steel screws Rocker type for square handle tumbler or toggle switches FSK-1V FSK-1V-A For duplex flush receptacle with spring cover FSK-1VDR FSK-1VDR-A Operating type for square handle tumbler or toggle switches FSK-1VS FSK-1VS-A Gasket (Replacement) Neoprene for use with cast covers above and receptacle covers on page 9 FS-GKR-1N FS-GKR-1N Cast Covers Only Furnished with stainless steel screws less gasket For standard 2 or 3 wire duplex receptacles For round flush receptacles. Hole dia. 1-7/16" For square handle toggle switches FSK-1DR-C FSK-1R-Z FSK-1TS-C For square handle toggle switches (with protecting guard) FSK-1TSG-C FSK-1TSG-CA

B-9 FS and FD Receptacle Covers and Plugs for Single Gang Device Boxes Weatherproof, Raintight and Dust-tight.

Aluminum Ridge Top Ridge Top Receptacle Cover has threaded aluminum cap. Plug has neoprene boot and aluminum fastening ring.

Non-Locking, U Shaped Grounding Type Receptacle takes U shaped or round grounding contact plugs 15 Amp, 125V NEMA NEMA 5-15R 5-15P

6-15P 2P, 3W FSK6-15 FSK6-15-A FSWP6-15 20 Amp, 250V NEMA NEMA 6-20R 6-20P 2P, 3W FSK6-20 FSK6-20-A FSWP6-20 Also takes FSWP5-15

9 B-9 FS and FD Receptacle Covers and Plugs for Single Gang Device Boxes Weatherproof, Raintight and Dust-tight. Malleable Iron and Aluminum Covers for Ridge Top Boxes Catalogue Number Receptacles Plug Receptacle Plug Pole/Wire Malleable Iron Aluminum Ridge Top Ridge Top Receptacle Cover has threaded aluminum cap. Plug has neoprene boot and aluminum fastening ring. Furnished with receptacle, neoprene gasket, stainless Steel screws. Non-Locking, U Shaped Grounding Type Receptacle takes U shaped or round grounding contact plugs 15 Amp, 125V NEMA NEMA 5-15R 5-15P 2P, 3W FSK5-15 FSK5-15-A FSWP Amp, 125V NEMA NEMA 5-20R 5-20P 2P, 3W FSK5-20 FSK5-20-A FSWP Amp, 250V NEMA NEMA 6-15R 6-15P 2P, 3W FSK6-15 FSK6-15-A FSWP Amp, 250V NEMA NEMA 6-20R 6-20P 2P, 3W FSK6-20 FSK6-20-A FSWP6-20 Also takes FSWP5-15 Plugs Also takes FSWP6-15 Plugs Locking Grounding Type 15 Amp, 125V NEMA NEMA L5-15R L5-15P 2P, 3W FSKL5-15 FSWPL Amp, 250V NEMA NEMA L6-15R L6-15P 2P, 3W FSKL6-15 FSWPL Amp, 277V NEMA NEMA L7-15R L7-15P 2P, 3W FSKL7-15 FSWPL7-15

10 B-10 FS and FD Two-Gang Cast Device Boxes: Malleable Iron, Aluminum FERROUS ALLOY COPPER-FREE ALUMINUM STD. Catalogue Catalogue ILLUSTRATION SIZE PKG. Number Wt. lbs. Number Wt. lbs. 1/2 10 FS-12 Shallow 2.70 FS-12A Shallow.90 3/4 10 FS-22 } 2.60 FS-22A }.87 1/2 10 FD FD-12A.90 3/4 10 FD-22 Deep 2.70 FD-22A Deep FD-32 } } 2.80 FD-32A.93 1/2 10 FSC-12 Shallow 3.00 FSC-12A Shallow /4 10 FSC-22 } 3.00 FSC-22A } /2 10 FDC FDC-12A.97 3/4 10 FDC-22 Deep 3.00 FDC-22A Deep 1.00 } } 1 10 FDC FDC-32A /2 3/4 10 FSD-212* Shallow 2.70 FSD-212A* Shallow.90 *Hubs at top of illustration are 1/2 Dimensions for FS & FD Two-Gang Devices Dimensions Tandem Devices Hub A B C D E Size FS FD 1/2 3/4 5/8 1-3/ /4 2-5/16 3/4 3/4 3/4 1-3/ /4 2-5/16 1 7/8 7/8 1-1/ /4 2-5/16 Covers on page 11. Maximum copper content less than 4/10 of 1%.

11 December 2006 FS and FD Two-Gang Cast Device Boxes: Malleable Iron, Aluminum B-11 Catalogue Std. Wt. lbs. ILLUSTRATION Number Description PKG. Per 100 Two-Gang Covers FS-42* Blank Cover, Steel Electrogalvanized FS-52* Round Receptacle Cover, Steel Electrogalvanized. Hole dia. 1-7/16" FS-62* Duplex Receptacle Cover, Steel Electrogalvanized FS-92* Tumbler Switch Cover, Steel Electrogalvanized FS-69* Combination Duplex Receptacle and Tumbler Switch Cover, Steel Electrogalvanized FS-65* Combination Duplex Receptacle with Single Receptacle, Steel Electrogalvanized Vaportight Covers Furnished with gasket and stainless steel screws FS-200g* Blank Cover, Ferrous Alloy FS-1282 Aluminum Cover with Operating Mechanism for external operation of Tumbler Switches. Push Pull operation, ON or OFF Gasket (Replacement) FS-GKR-2N Neoprene - for use with 2-gang cast covers above. * Available in Aluminum: Add suffix A to Catalog No. Maximum copper content less than 4/10 of 1%. December 2006

12 B-12 FS and FD Three-Gang Cast Device Boxes: Malleable Iron, Aluminum FERROUS ALLOY COPPER-FREE ALUMINUM STD. Catalogue Catalogue ILLUSTRATION SIZE PKG. Number Wt. lbs. Number Wt. lbs. FS Three-Gang Bodies 3/4 5 FSC-23 Shallow 3.60 FSC-23A Shallow FDC-33 Deep 4.00 FDC-33A Deep 1.33 Catalogue Std. Wt. lbs. ILLUSTRATION Number Description PKG. Per 100 Three-Gang Covers FS-43* Blank Cover, Steel Electrogalvanized FS-63* Duplex Receptacle Cover, Steel Electrogalvanized FS-93* Tumbler Switch, Steel Electrogalvanized FS-699* FS-669* Combination Duplex Receptacle and Tumbler Switch Cover, Steel Electrogalvanized Combination Duplex Receptacle and Tumbler Switch Cover, Steel Electrogalvanized Vaportight Covers Furnished with gasket and stainless steel screws FS-300g* Blank Cover, Ferrous Alloy FS-1283 Aluminum Cover external operation of Tumbler Switches. Push Pull operation, ON or OFF Dimensions for Three-Gang Devices Hub A B C D E Size FS FD 1/2 3/4 5/8 1-3/ /4 2-3/16 1 7/8 7/8 1-1/ /4 2-3/16 * Available in Aluminum: Add suffix A to Catalog No. Maximum copper content less than 4/10 of 1%.

13 B-13 FS and FD Four-Gang Cast Device Boxes: Malleable Iron, Aluminum ILLUSTRATION SIZE STD. PKG. FERROUS ALLOY FS Four-Gang Bodies 3/4 3/4" 5 See FDO-4 on page B-16 Catalogue ILLUSTRATION Number Description Four-Gang Covers FS-44* Blank Cover, Steel Electrogalvanized. Fits FSC-24 FS-64* FS-94* FK-94* Duplex Receptacle Cover, Steel Electrogalvanized. Fits FSC-24 Tumbler Switch Cover, Steel Electrogalvanized. Fits FSC-24 Tumbler Switch Cover, Steel Electrogalvanized. Fits FDO-4 listed on page 16 * Above covers attach to devices Vaportight Covers Furnished with gasket and stainless steel screws FS-400G FK-400G FS-400G* Blank Cover, Ferrous Alloy. Fits FSC-24 FK-400G* Blank Cover, Ferrous Alloy. Fits FDO-4 on page 16 * Above covers attach to box Gaskets FS4-GK FK4-GK FK4-GK For Covers for FDO-4 Unilets Sponge Neoprene FS4-OGK FS4-0GK For FS-400G and FS-1284 Covers with Gasket Mounting Groove Dimensions FS and FD Unilets Hub A B C D Size FS FD 1/2 3/4 5/8 1-3/ /4 1 7/8 7/8 1-1/ /4 * Available in Aluminum: Add suffix A to Catalog No. Cast Covers are copper free (Max copper content less than 4/10 of 1%).

B-14 Wet Location Receptacle Covers for NEMA Configuration Receptacles Available with NEMA Configuration Receptacles or as Covers Only.

be in a weatherproof enclosure, the integrity of which is not affected when the receptacle is in use (attachment plug cap inserted).

Mounts on FS or FD device boxes or equivalents, either single gang or multiple gang with single gang openings. Features Provides full protection in damp or wet locations per CEC.

With plug inserted, a heavy-duty gasket in throat of receptacle seals around it to keep out moisture and dirt. Receptacle interiors comply with NEMA Standards WD-1 and WD-5.

14 B-14 Wet Location Receptacle Covers for NEMA Configuration Receptacles Available with NEMA Configuration Receptacles or as Covers Only. Covers also accommodate Toggle Switches Applications Meet CEC receptacle requirements for wet locations: A receptacle installed outdoors where <None>exposed to weather or in other wet locations shall be in a weatherproof enclosure, the integrity of which is not affected when the receptacle is in use (attachment plug cap inserted). For industrial, commercial or residential use as a general purpose receptacle or for powering portable equipment not exceeding medium duty ratings. Mounts on FS or FD device boxes or equivalents, either single gang or multiple gang with single gang openings. Features Provides full protection in damp or wet locations per CEC. Gasketed spring door cover closes tightly automatically to protect receptacle from moisture and dirt when not in use. With plug inserted, a heavy-duty gasket in throat of receptacle seals around it to keep out moisture and dirt. Receptacle interiors comply with NEMA Standards WD-1 and WD-5. Receptacle interiors are specification grade, back and side wired. Single cover units accommodate NEMA configuration receptacles for locking or non-locking blade plugs, or toggle switches. Duplex units accommodate one receptacle and one toggle switch or any combination of the two. Covers open all the way, permitting easy plug insertion and withdrawal. Also permits adequate access to cover screws for easy attachment of cover to FS, FD or other device box. Large head cover screws are captivated. Unique design of spring door hinge provides smooth action to eliminate the possibility of bending of its stainless steel shaft. Duplex units have a separated hinge shaft for each spring door cover to reduce stress on the shafts. Spring door cover puts pressure on plug (without tilting plug) to hold plug in best position for providing optimum weatherproof seal. Stainless steel hinge springs are completely enclosed inside and out for superior resistance against corrosion. Duplex Cover on FS box. EPDM gaskets provide superior resistance to the weather, ozone and temperatures between -50 F and 260 F. Die-cast copper-free cover assemblies with 2-coat baked EPOXY finish (electrostatically applied for uniform coverage) to provide protection against corrosion. Positive ground path assured for all exposed metal parts. Receptacle interiors grounded through an extra contact in all types. Selfgrounded in Duplex units. Standard Materials Cover and face plate: die-cast copper-free (4/10 of 1% max.) aluminum. Gaskets: ethylene propylene rubber (EPDM). Cover screws and hinge shaft and spring: stainless steel. FSK-SBA Adapter: steel plate with closed cell sponged neoprene gasket. Typical application with NEMA configuration receptacle and plug, mounted on an FS box. Gasket seals around plug, keeping out moisture and dirt. Spring door closes automatically when plug is withdrawn to protect receptacle. Single Cover on FS box. Standard Finishes Cover and face plate: two-coat baked gray EPOXY finish. FSK-SBA Adapter: zinc electroplate. Compliances CSA approved. U.S. Federal Specification W-C-586B. NEC OSHA Standards, Subpart S. NEMA Standards WD-1 (straight blade) and WD-5 (locking type). Reference Data For FS/FD Boxes, see pages B5 and B6. For additional Receptacle Covers, see page B9. Spring doors open wide for easy plug insertion and cover assembly (covers shown in open position for illustration only). This view shows gaskets that protect plugs. Gasket on bottom of cover prevents entry of moisture into device box (see gasket description on page 8).

FS and FD Cast Device Boxes: Malleable Iron, Aluminum B-15 Wire/ NEMA Catalogue Number Amp Pole Volts Configuration With Receptacle Cover Only

FSK-WRD 20 2P, 3W 250 6-20R FSKD6-20 FSK-WRD Single Cover for Non-Locking and Locking Blade Plugs, with 1-3/8" Device Opening 15 2P, 3W 125

3W 125 L5-15R FSKJL5-15 FSK-WR1 15 2P, 3W 250 L6-15R FSKJL6-15 FSK-WR1 15 2P, 3W 277 L7-15R FSKJL7-15 FSK-WR1 Single Cover for Locking Blade

FSK-WR2 Single Cover for GFI GFI Cover Only FSK-WGF1 Single Cover for Toggle Switches (1-19/32" Opening) Accommodates Toggle Switch.

FSK-WT2 Adapter/Gasket For mounting Receptacle Cover on Switch Boxes (not required on FS/FD Boxes).

15 FS and FD Cast Device Boxes: Malleable Iron, Aluminum B-15 Wire/ NEMA Catalogue Number Amp Pole Volts Configuration With Receptacle Cover Only Non-Locking, U Shaped Grounding Type 15 2P, 3W R FSKD5-15 FSK-WRD 15 2P, 3W R FSKD6-15 FSK-WRD 20 2P, 3W R FSKD5-20 FSK-WRD 20 2P, 3W R FSKD6-20 FSK-WRD Single Cover for Non-Locking and Locking Blade Plugs, with 1-3/8" Device Opening 15 2P, 3W R FSKJ5-15 FSK-WR1 15 2P, 3W R FSKJ6-15 FSK-WR1 20 2P, 3W R FSKJ5-20 FSK-WR1 20 2P, 3W R FSKJ6-20 FSK-WR1 15 2P, 3W 125 L5-15R FSKJL5-15 FSK-WR1 15 2P, 3W 250 L6-15R FSKJL6-15 FSK-WR1 15 2P, 3W 277 L7-15R FSKJL7-15 FSK-WR1 Single Cover for Locking Blade Plugs, with 1-19/32" Device Opening Accommodates NEMA configuration receptacles with 1-19/32" opening diameter. FSK-WR2 Single Cover for GFI GFI Cover Only FSK-WGF1 Single Cover for Toggle Switches (1-19/32" Opening) Accommodates Toggle Switch. Furnished with Toggle Switch Plate to provide protection from exposed terminal wires of Toggle Switch. FSK-WT2 Adapter/Gasket For mounting Receptacle Cover on Switch Boxes (not required on FS/FD Boxes). FSK-SBA Single Duplex Receptacle Cover mounted on Switch Box with FSK-SBA Adapter/Gasket *Covers shown in open position for illustration only. Spring door closes automatically when plug is withdrawn. NOTE: All receptacle covers have an overall height of 1.16" (2.9cm).

16 B-16 FS and FD Cast Device Boxes: Malleable Iron, Aluminum Material Single Gang Two Gang Three Gang Four Gang Ferrous Alloy Aluminum FDO-1 FDO-1A FDO-2 FDO-2A FDO-3 FDO-3A FDO-4 FDO-4A Features Thick wall on all four sides. Drill and tap anywhere on sidewalls. Ground screw at top of box for easy access. Two exterior mounting lugs. Fits standard sheet metal device covers with four mounting holes. Weatherproof when used with gasketed cast weatherproof device covers. Ferrous alloy. Available in copper free aluminum: add suffix A. Standard finish Aluminum Alcote Ordering Data To determine the catalogue numbers of FDO Unilets with drilled and tapped entries, the following information should be shown: 1. Establish the Unilet catalogue number from above. 2. Determine the arrangement of entries from the illustrations in Section B, page The symbols for the conduit entry diameter are shown to the right. Where no entry is required, the symbol X should be inserted. The Unilet catalogue number, illustration number and conduit entry information should be separated by dashes. Symbols for type and size of conduit entries Brazed Hubs Brazed Hubs Drilled and Back or Drilled and Back or Size Tapped Side Wall Size Tapped Side Wall 1/2 1 A 1-1/4 4 D 3/4 2 B 1-1/2 5 E 1 3 C 2 6 F Brazed Hubs may be used on all back openings. For boxes with union hubs order with drilled and tapped openings and order any male unions listed in Section I. Example: Unilet Selected FDO-2 conduit entry arrangement #19, ( see B19 page). Drilled and tapped entries A, B, and C are to be 1/2"; D is 1 : No entry location E, and F. Catalogue number will be: FDO XX. Dimensions

FD depth 2-19/32" FD-1L Single-Gang 1 215 FD-2L Two-Gang 1 425 FD-3L Three-Gang 1 640 FD-4L Four-Gang 1 1150 Dimensions of FD

17 FS and FD Cast Device Boxes: Malleable Iron, Aluminum B-17 Catalogue Std. Wt. lbs. ILLUSTRATION Number Description PKG. Per 100 FD Unilets with Lugs Take Single-Gang Covers listed on page B3 and B8. FD depth 2-19/32" FD-1L Single-Gang FD-2L Two-Gang FD-3L Three-Gang FD-4L Four-Gang Dimensions of FD Unilets with Lugs 2-13/16 6-1/2 10-3/ /8 4-9/16 3-1/4 7/8 5-9/16 6-5/ /32 Dia. 5-3/ THRD. 9-7/ /8 Cadmium Finish. Maximum Hub Size 1-1/2" threaded, and 1-1/4" no-thread or union.

18 B-18 FS and FD Cast Device Boxes: Malleable Iron, Aluminum Hub Information Listed below are the various types of brazed hubs which may be used with the FD Unilets listed on page 17 and the FDO box listed on page 16. Threaded, no-thread and union hubs may be brazed at any desired location, and the illustrations showing typical hub arrangements are on page 19. The illustrations show a maximum of five hubs on any one side of a Unilet, but it is possible to place more than five hubs on the top and bottom of three and four-gang Unilets. Look at the chart below for the maximum hub diameter and the minimum hub spacing distance. This chart, together with the Unilet dimensions shown on pages 16 and 17 will enable you to figure the maximum number of hubs which may be used. The hubs will be symmetrically placed about the axis of the Unilets unless exact dimensions are specified on the order. Threaded No-thread No-thread For For For Electrical Size Rigid Conduit Rigid Conduit Metallic Tubing Union Maximum Hub Size Maximum Hub Diameter Maximum Distance Between Conduit Centres FS 1 3/4 3/4 3/4 FD 1-1/2 1-1/4 1-1/4 1-1/4 1/2 1-1/8 1-1/2 1-1/8 1-1/2 3/4 1-3/8 1-25/32 1-3/8 1-25/ /16 2-1/32 1-9/16 2-1/32 1-1/4 1-15/ / / /32 1-1/2 2-3/16 1/2 1-1/4 1-9/16 1-1/4 1-9/16 3/4 1-1/2 1-27/32 1-1/2 1-27/ /4 2-3/32 1-3/4 2-3/32 1-1/4 2-1/8 2-29/32 2-1/8 2-29/32 1-1/2 2-3/8 Order Information example: Unilet Selected FD-2L conduit entry arrangement #19, ( see page 17). Drilled and tapped entries A, B, and C are to be 1/2"; D is 1": No entry location E, and F. Catalogue number will be: FD-2L XX.

19 FS and FD Cast Device Boxes: Malleable Iron, Aluminum B-19 Ordering Data To determine the catalogue numbers of Unilets with drilled and tapped entries or hubs, the following information should be shown: 1. Unilet catalogue number from listings on page 16 or Sketch number of entry arrangement selected from illustrations below. 3. Entry symbols taken from the table shown on the bottom of this page. Start from the left on the top of the Unilet and continue in rotation clockwise around its body. Where no entry is required, the symbol X should be inserted. The three various divisions of the catalogue number should be separated by dashes. Ordering example: The Unilet selected is an FDO4 and the entry arrangement is sketch number 12. Entry A, B and C are to be 1/2" drilled and tapped for rigid conduit; D is to be a 1" hub and there is no entry at location E. The catalogue number will be as follows FDO CX. Single, Two, Three and Four-Gang (Front View and oriented as mounted) A TOP A A B A B C A B C D A B C D E B SIDES A B C C C E F G BOTTOM B D E F A A A B A B A B C A B C D A B C D E D B C B D C E D F E G F C C A A A A B A B A B C A B C B C H C B B F C H D C D G J D C E D F E F E D G F E A B C A B C D A B C D A B C D A B C D E A B C D E A B C D E K J D E M K E E M F L F O N F G H G F F E J H G F K J H G G F Symbols for type and size of conduit entries Brazed Hubs Brazed Hubs Drilled and Back or Drilled and Back or Size Tapped Side Wall Size Tapped Side Wall 1/2 1 A 1-1/4 4 D 3/4 2 B 1-1/2 5 E 1 3 C 2 6 F L K J H G M L K J H

B-20 FSH and FAH Weatherproof Receptacle and Breaker Assemblies For use with Rigid Conduit FSH and FAH Series Assemblies are used outdoors to supply power in remote areas such as: Garden Lighting

20 B-20 FSH and FAH Weatherproof Receptacle and Breaker Assemblies For use with Rigid Conduit FSH and FAH Series Assemblies are used outdoors to supply power in remote areas such as: Garden Lighting Parking Lots Marinas Campsites Trailer Parks These units will accomodate devices and covers normally used on single gang FS and FD unilets. Catalogue Std. ILLUSTRATION Number Description PKG. Threaded 2" Mounting Hub FAHD-16** Double Face Fitting Only 2 Recommended mounting height 2 6 Featured 40 angle face uses standard covers FAHD-1611** FAHD-1612** FAHD-1613** Complete with Two Duplex Receptacles and Covers 2 Complete with One Duplex Receptacle and One Duplex Circuit Breaker for two 125V Circuits 2 Complete with One Duplex Receptacle and One 1-Pole 15 Amp Circuit Breaker 2 Aluminum* can be supplied on request: Add suffix A to Catalog No. *Copper free less than 4/10 of 1%. **Epoxy Coated

FS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.

FS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction. S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent