STANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics. www-friatec-ceramics.com
|
|
- Kenneth Wilcox
- 6 years ago
- Views:
Transcription
1 STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics www-friatec-ceramics.com
2 CONTACT Marc erenard Phone: +33 (0) MATERIAS Material FRIATEC-Brand Characterisation Al 2 Aluminium Oxide Al 2 Aluminium Oxide Al 2 Aluminium Oxide Al 2 Aluminium Oxide Al 2 Aluminium Oxide Al 2 (+ ZrO 2 ) Aluminium Oxide, fine grain stabilized ZrO 2 Zirkonium Oxide ZrO 2 Zirkonium Oxide DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT DD57 FRIAIT F99,7 FRIAIT FZT FRIAIT FZM DEGUSSIT FZY Pure Al 2, dense, excellent thermal and electrical resistance properties, corrosion resistant, permeable to microwaves Pure Al 2, slightly porous, good resistance to thermal shock, extremely good creep strength Pure Al 2, very porous, good thermal insulation, highest resistance to thermal shock of all the Al 2 materials Pure Al 2, dense, without any binder, red colour, wear resistant and tough, also called sintered ruby Pure Al 2, dense, extremely resistant to wear and corrosion, very high electrical insulating properties A 2 toughened with ZrO 2, dense, high strength, good resistance to thermal shock, extremely resistant to wear and corrosion, fine grain size ZrO 2 partially stabilized with MgO, dense, high strength and highly wear resistant, extremely resistant to corrosion and thermal shock Partially stabilized with Y 2, dense, high purity ZrO 2, high temperature and corrosion resistance, ion conducting for measuring oxygen On request, we also supply parts with dimensions not listed as well as parts made of other ceramic materials 02 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
3 TOERANCES IN HIGH-TEMPERATURE TECHNOOGY The dimensional accuracy of the size of the sintered parts essentially depends on the material and the forming method. Tubes, multi-bore tubes and rods ø 3 mm as well as bands: Diameter ± 5 % (but not less than ± 0,1 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height 0.5% of total length Tubes, multi-bore tubes and rods ø < 3 mm: Diameter ± 5 % (but not less than ± 0,05 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height: 0.5% of total length Crucibles, boats, combustion trays: Tolerances ± 3 % (but not less ± 0,1 mm) Plates: Tolerances ± 3 % (but not less ± 0,1 mm); Deflection: maximum 0,5 % of the diagonal Insulating beads and grinding bodies: Tolerances ± 3 % (but not less than ± 0,1 mm) All dimensions in mm TABE OF CONTENTS High Temperature Technology Pages : Tubes 10 Multi-bore tubes 11 Insulating beads 12 Protective tubes/ Multi-bore tubes for thermocouples 13 Rods, Bars, Bands Crucibles 17 Boats, Combustion trays Plates 21 Grinding bodies 22 Insulating powders, Cement FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 03
4
5 HIGH TEMPERATURE TECHNOOGY Tubes, Rods, Multi-Bore Tubes, Bands, Crucibles, Discs, Plates, Boats, Combustion Trays, Grinding Pieces, Insulating powders, Cement
6 TUBES DEGUSSIT A24 Ød Ø D Ø d max. 3 1, * * * * * * Ø D Ø d max. DEGUSSIT A * normative size for thermocouple ARGE-DIAMETER TUBES Ø D Ø d max Ød Order-related manufacture 06 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
7 TUBES - ONE END COSED Ø D Ø d max. 3 1, * * * * * * * * DEGUSSIT A24 Ød Ø D Ø d max. DEGUSSIT A * standard size for thermocouple FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 07
8 THIN INSUATING TUBES Ø D Ø d max. 0,5 0, ,6 0, ,8 0, Ød 1 0, , ,1 0, ,2 0, , ,6 0, ,7 1, , , ,5 1, ,7 1, TUBES - THIN WAED Ø D Ø d max Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
9 TUBES FOR OXYGEN SENSORS Ø D Ø d max. DEGUSSIT FZY Order-Related Product Ød TUBES FOR OXYGEN SENSORS - ONE END COSED Ø D Ø d max. DEGUSSIT FZY Order-Related Product Ød RECTANGUAR TUBES B H Wall Thickness max , , Order-Related Product B H TUBES FOR HEATING COIS Ø D Ø d max. Thread breadth Thread depth Thread pitch Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 09
10 MUTI-BORE TUBES - ROUND on request with notch Ø D Ø d Number of bores max. 0,9 0, ,2 0, ,2 0, ,55 0, , , ,35 0, ,5 0, ,8 0, , , * 4 0, * 4 1, , ,5 1, * 6 1, * 8 0, , , * 8,5 1, * * normative size for thermocouple MUTI-BORE TUBES - OVA on request with notch B H Ø d Number of bores max ,9 0, ,4 0, ,5 0, ,2 1, FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
11 INSUATING BEADS ROUND Ø D Ø d Number of bores 4 0, , , , INSUATING BEADS ANGUAR Ø D Ø d 3, , , , , Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 11
12 PROTECTIVE TUBES FOR STANDARD-ENGTH THERMOCOUPES - ONE END COSED DEGUSSIT A24 Ød Ø D Ø d max Ø D Ø d max. DEGUSSIT A MUTI-BORE TUBES FOR STANDARD-ENGTH THERMOCOUPES Ø D Ø d Number of bores max. 4 0, , , , ,5 1, ,5 1, THERMOCOUPES DEGUSSIT A24 Protective tubes and bore tubes ength outer protective tube 1 ength inner protective tube 2 ength bore tube FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
13 RODS Ø D max. 0, , , , , Ø D max. BARS FRIAIT F99, Order-Related Product Tolerances Diameter: +1 / +4 mm ength: +/- 5 mm Deflection: max. 0,5 % of the total lenght BANDS B H max Order-Related Product B H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 13
14 CRUCIBES - CYINDRICA, FAT BASE DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY 1 2 H Ø D1 Ø D2 Approx. Vol. ml , H H Ø D1 Ø D2 Approx. Vol. ml DEGUSSIT A H Ø D1 Ø D2 Approx. Vol. ml DEGUSSIT A , , H Ø D1 Ø D2 Approx. Vol. ml DEGUSSIT FZY Order-Related Product 14 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
15 CRUCIBES CONICA HIGH FORM H Ø D1 Ø D2 Ø D3 Approx. Vol. ml DEGUSSIT FZY H Ø D1 Ø D2 Ø D3 Approx. Vol. ml DEGUSSIT FZY Order-Related Product 3 H CRUCIBES CONICA WIDE FORM H Ø D1 Ø D2 Ø D3 Approx. Vol. ml H 3 CRUCIBES - CYINDRICA, ROUND BASE H Ø D1 Ø D2 Approx. Vol. ml Tammann No I a I b I c II a II b II c III a III b III c ,070 IV a Tammann H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 15
16 SIP-ON CRUCIBES Approx. Vol. ml Order-Related Product Ø5 Ø4 0, Ø2 Ø4 SIP-ON CRUCIBES Approx. Vol. ml Order-Related Product Ø 17 Ø 16 R 8 R Ø 2,5 Ø 3,6 SIP-ON CRUCIBES Approx. Vol. ml Order-Related Product Ø8 Ø6 ( 15 ) 0,6 6 8,4 8 6 Ø2,55 Ø4,3 16 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
17 BOATS B H W Approx. Vol. ml , , , B W H COMBUSTION TRAYS B H W Approx. Vol. ml B H W Approx. Vol. ml DEGUSSIT A B DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY H B H W Approx. Vol. ml DEGUSSIT A * W B H W Approx. Vol. ml DEGUSSIT FZY Order-Related Product * W conical FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 17
18 PATES - ROUND DEGUSSIT A25 H Ø D PATES ROUND WITH HOE H Ø D DEGUSSIT A Plates sizes of plates up to approx. Ø 350 x 20 upon request H Ø D Ø d Plates sizes of plates up to approx. Ø 350 x 20 upon request 18 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
19 PATES - RECTANGUAR B H DEGUSSIT A25 FRIAIT F99,7 FRIAIT FZM H B H DEGUSSIT A B B H FRIAIT F99, B H FRIAIT FZM Plates sizes of plates up to approx. 700 x 350 x 20 upon request FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 19
20 GRINDING BODIES H Ø D pcs./l pcs./kg kg/l , , , , , INSUATING POWDER - CACINED AUMINIUM OXIDE Al 2 >99,5 % Type Crystal size VM 99% < 10 µm INSUATING POWDER - FUSED AUMINIUM OXIDE Al 2 >99,7% Type Crystal size E No. 100 ~ 150 µm E No. 250 ~ 40 µm CEMENT AUMINIUM OXIDE A 2 >95% Type Crystal size A2O3 ~ 150 µm FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
21 Ø D PRECISION BAS FRIAIT F99,7 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Other dimensions and further geometrical tolerances upon request Quality: Grade 25, polished surface Sphericity: 0,6 µm Diameter Tolerance: 2,5 µm FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 21
22 COMPETENCE PUS RESPONSIBIITY Our customers rightly expect first-class performance with lasting value. Besides the competence to achieve this, we also undertake the responsibility for it. Ask for the evidence: FRIATEC is the technological and market leader in ceramic materials for the 21st Century Image-intensifier for radiology 02 X-Ray tube for radiology 03 Pressure sensor for aerospace 04 Camera housing for aerospace 05 Accelerator tube for radiologye 06 Feedthroughs for high-vacuum applications 07 High-voltage feedthroughs for vacuum technology 08 Insulating tubes for high-vacuum technology 09 High current feedthroughs for energy systems 10 Wafer carrier for the semiconductor industry 11 Test plates for the semiconductor industry 12 Sensor elements for the semiconductor industry 13 Guide strip for the printing industry 14 Isolator for the printing industry 15 Square tubes for the printing industry 16 Tubes, rods and capillaries for high temperature applications 17 Thermal protection tubes for the glass and metallurgical industries 18 Crucibles and boats for industry and research 19 FZY-probes for oxygen measurement in gases 20 Dielectric elements for fuel cells 21 Dielectric elements for fuel cells 22 Thermal protection tubes for high temperature applications 23 Shaping roller for the glass industry 24 Glow-block for heat treatment of lamp filaments 22 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
23 Electrical Engineering High Temperature Technology Mechanical Engineering Surface Finishing Ozone generator for the semiconductor industry 26 Control discs for production and laboratory processes 27 Dosing pistons with control edge for the food-processing and pharmaceutical industries 28 Pump inserts for medical technology 29 Float body for flow-measurement in the chemical industry 30 Electrode holder for flow-measurement in the chemical industry 31 Flow meters for the food-processing industry 32 Welding pins for automotive-body manufacture 33 Centring pin for automotive-body manufacture 34 Metal-forming tools for automotive-body manufacture 35 Isolation shells for magnetically-coupled pump in the chemical industry 36 Pump impeller for the chemical industry 37 Stirrers for the chemical industry 38 High-pressure pump piston for the chemical industry 39 Adhesive nozzle for the paper industry 40 Valve disc for pulp-processing 41 Vacuum plate for paper-making 42 Protection tubes for the glass industry 43 Midget file for the glass-processing industry 44 Hand lappers for the glass-processing industry 45 Grinding wheel for the glass-processing industry 46 Grinding tools for metal working 47 Bench-stones for metal working 48 Mounted points for metal working FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 23
STANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.
STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics www.friatec.com CONTACT Global Sales Phone: +49 621 486-1353 Fax: +49 621 486-25 1353 Phone: +49 621 486-1240 Fax: +49 621 486-25 1240
More informationHIGH-TEMPERATURE TECHNOLOGY. Components made of FRIALIT -DEGUSSIT High-Performance Ceramics.
HIGHTEMPERATURE TECHNOLOGY Components made of FRIALIT DEGUSSIT HighPerformance Ceramics www.friatec.com/ceramics FRIALIT DEGUSSIT HIGHTEMPERATURE TECHNOLOGY INVENTIVE, EXPERIENCED, SUCCESSFUL The quality
More informationBRUSHES WITH SHANK 62 63
6 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0.5 0.0 STH 0.50 0.00 ROH 0.50 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 75 9 /8 5 5/8 8 5,000
More informationGRAPHITE INDIA LIMITED
GRAPHITE INDIA LIMITED SPECIALITY DIVISION Uniquely special... CORPORATE PROFILE Incorporated in 1963 with Technical Collaboration with M/s. Great Lakes Carbon Corporation, USA. GIL Today is one among
More informationMoisture analyzers (moisture meters) FIZEPR-SW100
www.fizepr.ru Design Bureau FIZELEKTRONPRIBOR Moisture analyzers (moisture meters) FIZEPR-SW100 for liquid, paste-like and bulk materials including petroleum, fuel oil, sand, coal, ore, concrete mixture,
More informationKnot Wheel Brushes WHEEL BRUSHES
W HE E L B RU S H E S 4 5 Knot Wheel Brushes Knot Wheel Brushes Knot wheel brushes for grinders, angle grinders and stationary machines used in the preparation and reworking of bolt fillet and butt welds.
More informationSpecial Electrically Resistant Heated Furnaces
Special Electrically Resistant Heated Furnaces Drying of Ceramic Components Autor: Roland Waitz, Malte Möller Many ceramic masses are fabricated in plastic or liquid condition by addition of water. In
More informationCeramic and glass technology
1 Row materials preperation Plastic Raw materials preperation Solid raw materials preperation Aging wet milling mastication Mixing seving Grain size reduction Milling Crushing Very fine milling Fine milling
More informationDevelopment of New Grade SUMIBORON BN7000 for Cast Iron and Ferrous Powder Metal Machining
SPECIAL ISSUE Development of New SUMIBORON for Cast Iron and Ferrous Powder Metal Machining Yusuke Matsuda*, Katsumi OKaMura, shinya uesaka and tomohiro FuKaYa SUMIBORON P (polycrystalline cubic boron
More informationTECHNICAL DATA SHEET GRILON TS V0
TECHNICAL DATA SHEET GRILON TS V0 General product description Grilon TS V0 is an unreinforced, normal viscosity, self-extinguishing PA66 + PA6 injection moulding grade. Grilon TS V0 has the following important
More informationCeramic Components. Innovative in Ceramics.
Ceramic Components Innovative in Ceramics www.vogt-ceramic.de VOGT Ceramic Components DESIGN For more than 35 years, VOGT GmbH has been manufacturing technical ceramic components. Our many years of experience
More informationTHINK. Filter Technology SIKA-B
THINK Filter Technology SIKA-B ENGINEERING THAT MOVES THE WORLD Since 1759 250 years of exceptional engineering GKN Sinter Metals Filters, the leading manufacturer of porous sinter metal products, offers
More informationCeramic Components. Innovative in Ceramics.
Ceramic Components Innovative in Ceramics www.vogt-ceramic.de VOGT Ceramic Components DESIGN For more than 35 years, VOGT GmbH has been manufacturing technical ceramic components. Our many years of experience
More informationSURFACE TEMPERATURE SENSORS
SURFACE TEMPERATURE SENSORS These sensors are thermocouples and resistance thermometers for surface temperature measurement of objects. C400 R400 Magnet sensors measurement and monitoring of objects such
More informationGRINDING AND OTHER ABRASIVE PROCESSES
GRINDING AND OTHER ABRASIVE PROCESSES Grinding Related Abrasive Process Abrasive Machining Material removal by action of hard, abrasive particles usually in the form of a bonded wheel Generally used as
More informationObjectives. This chapter provides fundamental background on processes of drawing of rods, wires and tubes.
WIRE DRAWING Objectives This chapter provides fundamental background on processes of drawing of rods, wires and tubes. Mathematical approaches for the calculation of drawing load will be introduced. Finally
More information1. 3 Extrusion molding
1. 3 Extrusion molding 9 Extrusion is a widely used technique, both in the field of traditional and technical ceramics. This method allows the continuous manufacture of products with a constant cross-
More informationDURATAN. Thermally prestressed tubing of special glass
DURATAN Thermally prestressed tubing of special glass 2 SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. With more than 130 years of outstanding development,
More informationISO 9001:2008 certified
c ISO 9001:2008 certified 3/14 www.setexproducts.com INTRODUCTION SETE Thermowells serve two primary functions: (1) extend temperature instrument life by protecting sensing elements from harsh process
More informationResource Guide. Section 3: Ductile Iron
Resource Guide Section 3: Ductile Iron Section 3 Ductile Iron Description of Grades... 3-3 65-45-12 Ferritic... 3-4 80-55-06 Partially Pearlitic... 3-6 100-70-02 Pearlitic... 3-8 4512 HRDS Heat Resistant...
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationMasterflex Polishing Products
Masterflex Polishing Products How to Order Masterflex Polishing Products When ordering it is important to give as much information about the operation as possible so that the correct grading is supplied.
More informationFurnaces for Research and Laboratory. Testing Drying Ashing Tempering Preheating Sintering Firing Annealing
Furnaces for Research and Laboratory Testing Drying Ashing Tempering Preheating Sintering Firing Annealing Muffle Furnaces KL 03/11 KL 15/12 T max 1100 C and 1200 C Universal muffle furnaces for many laboratory
More informationSynthetic and Natural Graphite
Synthetic and Natural Graphite The relative applications and fundamentals of the synthetic ti and natural graphite markets Tom Burkett Vice President GMS SGL Group Industrial Minerals Graphite & Graphene
More informationELECTRICAL RESISTIVITY AS A FUNCTION OF TEMPERATURE
ELECTRICAL RESISTIVITY AS A FUNCTION OF TEMPERATURE Introduction The ability of materials to conduct electric charge gives us the means to invent an amazing array of electrical and electronic devices,
More informationMetal Powder - the Raw Material of Future Production
Metal Powder - the Raw Material of Future Production BY GÜNTER BUSCH* SYNOPSIS Alongside Mobile Internet, Cloud Computing, Robotics, Energy Storage and Autonomous Vehicles, Additive Manufacturing is one
More informationFloat Flow Meters series NF
Float Flow Meters series NF - Quality design - High corrosion resistance - Reliable measurement principle - Low weight and small dimensions Doc. no.: 22, en_cat_nf, 8/2015 Usage Flowmeters type NF are
More informationNon Destructive Inspection Technology for Thermal Power Plants
37 Non Destructive Inspection Technology for Thermal Power Plants MIKIYASU URATA *1 KIYOTAKA AOKI *1 NAOYA URATA *2 KOICHI TAGAMI *2 MANABU KONDO *2 SHINTARO MATSUMOTO *3 In boiler facilities for thermal
More informationAISI A2 Cold work tool steel
T OOL STEEL FACTS AISI A2 Cold work tool steel Great Tooling Starts Here! General AISI A2 is an air- or oil hardening chromiummolybdenum-vanadium alloyed tool steel characterized by: Good machinability
More informationThermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
More informationAISI D2 Cold work tool steel
T OOL STEEL FACTS AISI D2 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationCHAPTER 70 GLASS AND GLASSWARE
CHAPTER 70 GLASS AND GLASSWARE Notes 1. This chapter does not cover: (a) goods heading 3207 (for example, vitrifiable enamels and glazes, glass frit, other glass in the form powder, granules or flakes);
More informationENGLISH Datasheet JIS Miniature Thermocouple Connector PCB Mounting Socket Types K, J, T, E, R/S & B (JIS Colour Code)
ENGLISH Datasheet JIS Miniature Thermocouple Connector PCB Mounting Socket Types K, J, T, E, R/S & B (JIS Colour Code) Versatile, high quality, circuit board mounting miniature socket Specially designed
More informationBZN* Compacts Tool Blanks and Inserts. Machining of Ferrous Materials
BZN* Tool Blanks and Inserts Machining of Ferrous Materials BZN* Tool Blanks and Inserts Diamond Innovations manufactures a complete line of high quality polycrystalline CBN products for machining ferrous
More informationThe increasing demand for raw materials for the production
Resistant heated rotary furnaces for heat treatment of rare earth minerals and quartz sand by Peter Wübben The rotary tube furnace combines, in most cases, today's expectations of a modern continuous heat
More informationEcoMultiCyclone.
EcoMultiCyclone Powerful Bath Cleaning www.durr.com EcoMultiCyclone Powerful Bath Powerful Bath Cleaning Cleaning Compact Robust Efficient Compact Robust Efficient The EcoMultiCyclone is used for the separation
More informationPRECISION POLYURETHANES
Company Profile: We at PRECISION POLYURETHANES manufacture and supply various types of Hi - Performance Cast Polyurethane components and other polyurethane products engineered for multipurpose industrial
More informationtrue grit minerals CUMI lative range of EMD PRODUCT CATALOG 100 years US $ 3 billion 29 companies +30,000 people MURUGAPPA GROUP
MURUGAPPA GROUP 100 years US $ 3 billion 29 companies +30,000 people EMD ELECTRO MINERALS DIVISION CUMI lative range of true grit minerals PRODUCT CATALOG FUSED PRODUCTS MACRO REGULAR BROWN FUSED ALUMINA
More informationERTALON Extruded Products
ERTALON Extruded Products Polyamides (PA) Main Characteristics: High mechanical strength, stiffness, hardness and toughness Excellent resilience High mechanical damping ability Good sliding properties
More informationA wide range of cold-formable steel grades and aluminium alloys are used as wire materials within a diameter range from 5 mm to 34 mm.
Cold-Formed Parts 2 ESKA manufactures complex precision cold-formed parts for applications with large and medium quantities. The highly-efficient cold- forming process ensures economic manufacture of near-net-shape
More informationHIGH TEMPERATURE CERAMIC & GRAPHITE ADHESIVES
HIGH TEMPERATURE & GRAPHITE S Technical Bulletin A2 Ceramabond 835-M bonds halogen lamp. Ceramabond 503 coats heater used to 1700 ºC. Ceramabond 685-N bonds infrared heater. Graphi-Bond 551-RN bonds graphite
More informationSPECIFICATION Insulated Steam Injection Tubing Revision 6, dated 24 July 2011
OIL TECH SERVICES, INC. 800 Wilcrest, Suite 100 Houston, TX 77042-1359 (310)-527-2695 (713) 789-5144 E Mail: mlombard@itmreps.com Website: www.itmreps.com SPECIFICATION Insulated Steam Injection Tubing,
More informationDiamond Tools. for Ultrasonic Machines
Diamond Tools for Ultrasonic Machines Why We Are the Adequate Partner for You: Company history: As a grandson of the wellknown Dr. Otto Schott (the inventor of the heatresistant borosilicate glass 1887
More informationThese conditions must be maintained during transport to the laboratory.
A successful laboratory analysis starts in the field. The result of an analysis is as good as the representativeness of the soil sample used. The sampling procedure is basically determined by the analyses
More informationFabrication Technology
Fabrication Technology By B.G.Balagangadhar Department of Electronics and Communication Ghousia College of Engineering, Ramanagaram 1 OUTLINE Introduction Why Silicon The purity of Silicon Czochralski
More informationQuality Blanks direct from the Manufacturer
Mechanical Applications Division Quality Blanks direct from the Manufacturer Expanded range of colors for translucent zirconium oxide On a long term basis, high quality is the basic requirement to become
More informationVANADIS 10 SuperClean High performance powder metallurgical cold work tool steel
SuperClean High performance powder metallurgical cold work tool steel Critical tool steel properties for GOOD TOOL PERFORMANCE Correct hardness for the application Very high wear resistance Sufficient
More informationApplication Guide for Ceramic Components Used in Domestic & Industrial Pumps
Application Guide for Ceramic Components Used in Domestic & Industrial Pumps Shafts, Seals & Bearings www.morganadvancedmaterials.com Overview Morgan Seals & Bearings Bearing Aluminium oxide Silicon carbide
More informationSCHOTT MEMpax New options for the MEMS industry. NMN Technology Day Schott AG Grünenplan
SCHOTT MEMpax New options for the MEMS industry NMN Technology Day Schott AG Grünenplan 06.11.2012 Agenda 2 Agenda 1. SCHOTT thin glass for Electronics & Biotech 2. MEMS Industry and Motivation for MEMpax
More informationIndex. Automotive engines, silicon nitride products development, 83-94
Index Advanced composite ceramics, properties and applications, 109-22 Aircraft engine bearings, shaft speed limits, 46-8 Alumina cast sintered, applications, 72-5 comparative erosive wear performance,
More informationUni-Seals Product Catalog
Uni-Seals Product Catalog www.uni-seals.com 0 Index PTFE Sheet/Rod/Tube GS4000 Pure PTFE sheet.. 2 GS4010 PTFE molded sheet 2 GS4020 PTFE skived sheet.. 2 GS4100 Expanded PTFE sheet.. 3 RO4000 PTFE rod.
More informationEcoMultiCyclone.
EcoMultiCyclone Powerful Bath Cleaning www.durr.com EcoMultiCyclone Powerful Bath Powerful Bath Cleaning Cleaning Compact Robust Efficient Compact Robust Efficient The EcoMultiCyclone is used for the separation
More informationBimetallic Barrel Benchmark Xaloy vs. Reiloy May 28th, 2013
Bimetallic Barrel Benchmark Xaloy vs. Reiloy May 28th, 2013 Scope available parts X-102 barrel Ø 35 mm x 1010 mm X-800 barrel Ø 40 mm x 1010 mm R121 barrel internally RP19.5 R216 barrel evaluated properties
More informationFrom Powder to Polish
REDEFINING POSSIBLE From Powder to Polish INDUSTRY S MOST RELIABLE SOURCE FOR FINISHED TOOLING & WEAR PARTS AMMUNITION AUTOMOTIVE GENERAL METALFORMING POWDER METALLURGY SEVERE SERVICE WEDM At General Carbide,
More informationSINTERED WIRE MESH.
SINTERED WIRE MESH www.sinteredfilter.org "Total filtration solution provider" For over 15 years, Boegger has been providing filtration solutions to a wide range of filtering industries where air, liquid
More informationProfile of an innovative company
Profile of an innovative company. August-Borsig-Str. 3 92224 Amberg/Germany Phone: +49(0)9621 630-0 Website: www.herding.com E-mail: info@herding.de Herding Filtertechnik: pure productivity For clean air,
More informationMetal Transitions HIGH TEMPERATURE
Metal Transitions High Temperature Thermal Solutions of Texas continues to meet the demands of technological advances by developing thermocouples using materials with unusually high performance characteristics
More informationChapter 18: Powder Metallurgy
Chapter 18: Powder Metallurgy ผ ช วยศาสตราจารย เร อโท ดร. สมญา ภ นะยา Reference: DeGarmo s Materials and Processes in Manufacturing 18.1 Introduction Powder metallurgy is the name given to the process
More informationExtrusion of complex shapes
Extrusion of complex shapes 1 Hot extrusion Hot extrusion is the process of forcing a heated billet to flow through a shaped die opening It is used to produce long, strait metal products of constant cross
More informationIndustrial Diamonds: Present and the Future
M.Sc Miroljub Vilotijevic Dr. Borislav Dacic Industrial Diamonds: Present and the Future Three resorting qualities of diamond available today for industrial use are: natural diamond (i), synthetic diamond
More informationINTRODUCTION. Think HSS
INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM
More informationExperts in Furnaces. Engineering. Fast and flexible. THERMCONCEPT powerd by innovation
Dental Furnaces Sintering furnaces for Zirkonia Chamber Furnaces for Dental Ceramic Compounds Furnaces for CAD / CAM - Systems Pre-heating Furnaces Muffle Furnaces Model Casting Accessories Experts in
More informationMeteorology 432. Thermometry Spring 2013
Meteorology 432 Thermometry Spring 2013 General Temperature impacts every day life. Errors of 2-3 ºC are not uncommon in many networks. Bank thermometers or Car thermometers. Errors of this magnitude are
More informationLaser Cladding AKMELOGI. Engineering Hi-tech Machinery Remanufacturing Services Flexible Manufacturing Systems
Laser Cladding AKMELOGI Engineering Hi-tech Machinery Remanufacturing Services Flexible Manufacturing Systems Laser Cladding A welding process, which uses added material in powder or wire form to build
More informationThermal Evaporation. Theory
Thermal Evaporation Theory 1. Introduction Procedures for depositing films are a very important set of processes since all of the layers above the surface of the wafer must be deposited. We can classify
More informationAC-HVAF Sprayed Tungsten Carbide: Properties and Applications
AC-HVAF Sprayed Tungsten Carbide: Properties and Applications A. Verstak Kermetco, Concord, California, USA V. Baranovski UniqueCoat Technologies, Oilville, Virginia, USA Abstract Activated Combustion
More informationCasting. Forming. Sheet metal processing. Powder- and Ceramics Processing. Plastics processing. Cutting. Joining.
Traditional Manufacturing Processes Casting Forming Sheet metal processing Powder- and Ceramics Processing Plastics processing Cutting Joining Surface treatment FUNDAMENTALS OF METAL FORMING Overview of
More informationMechanical Engineering Workshop. Location: Block G, L1. Lab Facilities
Mechanical Engineering Workshop Location: Block G, L1 Lathe Lathe Digital machine. Wood Cutting Saw machine. Milling machine. Hydraulic Press. Drilling machine (vertical). MIG Welding machine. Arc welding
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More informationAnglon Tools Tools for ANGL ROTARY HANDPC Soft rubber pads available in 4 different diameters (ø 0 mm, ø mm, ø 30 mm, ø mm) are available. Pressure se
inimo One Anglon Tools inimo Anglon System -- Versatility & Performance inimo Anglon angle grinders, with angles of 90 and degrees, are suitable for polishing flat, curved and end surfaces. Great for areas
More informationKGC SCIENTIFIC Making of a Chip
KGC SCIENTIFIC www.kgcscientific.com Making of a Chip FROM THE SAND TO THE PACKAGE, A DIAGRAM TO UNDERSTAND HOW CPU IS MADE? Sand CPU CHAIN ANALYSIS OF SEMICONDUCTOR Material for manufacturing process
More informationElectrochemical Die-Sinking (ECM) in Practice
Electrochemical Die-Sinking () in Practice Copyright by Maschinenfabrik Köppern GmbH & Co.KG. Distribution, forwarding or duplication of this document, whether in part or in full, is only allowed with
More informationProducing Metal Parts
Producing Metal Parts CNC vs. Additive Manufacturing www.3dhubs.com METAL KIT 2 Introduction This Kit discusses how to select the right manufacturing process for metal parts by comparing CNC and Additive
More informationCoatings. Ion Assisted Deposition (IAD) process Advance Plasma Source (APS) plasma-ion assisted Deposition. Coatings on Optical Fibers
Anti-Reflection Custom Ion Assisted Deposition (IAD) process Advance Plasma Source (APS) plasma-ion assisted Deposition Anti-Reflection on Optical Fibers OptoSigma supplies a wide selection of optical
More informationMEDICAL GRADE MATERIALS & COMPONENTS
MEDICAL GRADE MATERIALS & COMPONENTS High Purity Metals for Medical Device Manufacturing A Prince & Izant Company nutecmed.com 12999 Plaza Drive, Cleveland, OH 44130 +1 216.362.7000 Noblesville, Indiana
More informationQuartz Glass for Ultra High Pressure and High Intensity Discharge Lamps. Heraeus Quarzglas
Quartz Glass for Ultra High Pressure and High Intensity Discharge Lamps Heraeus Quarzglas 1 Advanced Material for Highest Demands Improved lighting performance and efficiency, a compact size and long lifetime
More informationKeeping the Customer First. Tungaloy Catalogue TE0707-E2. Cutting Tools.
Keeping the Customer First Tungaloy Catalogue TE0707-E2 2007 Cutting Tools www.tungaloy-eu.com Selection Guides List of... 410 Selection Guides... 412 Specifications Solid Carbide s For High Speed Deep
More informationPowder-Metal Processing and Equipment
Powder-Metal Processing and Equipment Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 17 Powder Metallurgy Metal powders are compacted into desired and
More informationZYBF. High Temperature Yttria Stabilized Zirconia Fibers. Advanced Fibrous Ceramics
Advanced Fibrous Ceramics ZYBF High Temperature Yttria Stabilized Zirconia Fibers The Unrivaled Industry Leader of ZrO 2 Insulation Three Product Types ZYBF-1 (7.5 pcf) ZYBF-2 (21 pcf) ZYBF-5 (16 pcf)
More informationSeparation of oil and water
Separation of oil and water author: Michael Friess 1. System oil water - water Length annual consumption Nearly all industrial process use mineral oil and synthetic oil as lubricant, as hydraulic power
More informationSteels for Hydraulic Applications from Ovako
Steels for Hydraulic Applications from Ovako mapp_hydraulic.indd 1 09-09-29 14.03.14 Our hydraulic steel can take the pressure At Ovako we have a long tradition as a steel supplier to the hydraulic industry,
More informationPowder Metallurgy. Powder-Metal Processing and Equipment 11/10/2009
Powder Metallurgy Powder-Metal Processing and Equipment Metal powders are compacted into desired and often complex shapes and sintered* to form a solid piece * Sinter: To heat without melting Text Reference:
More informationSpecial Coatings Special Materials
Special Coatings Special Materials Foreword Special coatings Special materials In order that standard components can function for long periods, without maintenance and reliably even under extreme operating
More informationCLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO. Capacitive level meters CLM 36. Features of variants. Accessories
CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO Capacitive level meters CLM 36 Capacitive level meters Riels CLM are designed for continuous level measurement of liquids, powders and bulk-solid
More information2890 Ligonier St. Latrobe, PA Phone Fax Toll Free
Your Best Choice For Carbide Components 2890 Ligonier St. Latrobe, PA 15650 Phone 724.532.3041 Fax 724.532.3043 Toll Free 800.862.7066 www.extramet.net OUR HISTORY OUR MISSION Extramet s Primary Objective
More informationLASER SINTERING DESIGN GUIDELINES LASER SINTERING PRODUCTION PARTS
LASER SINTERING DESIGN GUIDELINES LASER SINTERING Laser Sintering (Also known as Selective Laser Sintering, SLS, or LS) is an additive manufacturing process that builds parts by using a laser to selectively
More informationStainless Steel Pressure Vessels, Process Vessels and Tanks. Examples of manufactured products
Stainless Steel Pressure Vessels, Process Vessels and Tanks Examples of manufactured products Siljan Allards AB www.siljanallards.com Page 1 To the right, one out of six process vessels, installed in a
More informationHardfacing Electrodes. Special tubular construction requiring low operating currents. Hardness : 650/700 HB.
Hardfacing Electrodes Special tubular construction requiring low operating currents. Hardness : 650/700 HB. These electrodes have been engineered to provide extended service life at ambiant and elevated
More informationEHE TECHNICAL BULLETIN. Ferrimagnetic 1 materials for HF welding impeders. TB1010. History. Composition. Manufacturing Process
BULLETIN EHE TECHNICAL TB1010 Ferrimagnetic 1 materials for HF welding impeders. There is now a wide variety of ferrite types available from several manufacturers around the world. Only a small number
More informationSchunk Innovative Insulation Materials. Schunk Kohlenstofftechnik GmbH
Schunk Innovative Insulation Materials Schunk Kohlenstofftechnik GmbH Thermal Insulation at High Temperatures Carbon and Graphite Felt As a manufacturer of graphite felt for insulation in high-temperature
More informationDURAN. Tubing, Capillary and Rod of Borosilicate Glass 3.3
DURAN Tubing, Capillary and Rod of Borosilicate Glass 3.3 SCHOTT is an international technology group with more than 5 years of experience in the areas of specialty glasses, materials and advanced technologies.
More informationCARBON STEEL BARS HOT ROLLED
CARBON STEEL BARS HOT ROLLED Grade Description...3-2 Rounds...3-3 thru 3-4 Strip...3-5 Flats (A-36)...3-6 thru 3-8 (M1044)...3-9 Squares...3-9 Reinforcing Bars...3-10 Reinforcing Mesh...3-10 TOLERANCES...3-11
More informationEconomic Wear Protection For the Iron and Steel Industry Worldwide
Issue 07.06 www.kalenborn.de Economic Wear Protection For the Iron and Steel Industry Worldwide Reduce Costs and Avoid Downtime Large quantities of bulk material are handled in the conveying and storing
More informationFabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders
Fabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders Jing Yang, Tzu-Chieh Lin, Bill Manett, Jeremy Young, Dan Rooney Eugene Medvedovski SCI Engineered Materials,
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ABP SERIES OF AUTOMATIC BLISTER PACKAGING MACHINERY Ridat ABP series of machines are some of the most advanced models in the comprehensive range of Ridat blister packaging equipment.
More informationUltrason E. Ultrason S. The material of choice for demanding high temperature and filtration needs. Helping Make Products Better
Ultrason E Polyethersulfone (PESU) Ultrason S Polysulfone (PSU) The material of choice for demanding high temperature and filtration needs. www.ultrason.net Helping Make Products Better BASF demonstrates
More informationIntroduction. 1. Outline of fan case ring
A near-net-shape (NNS) ring-rolling process was developed to reduce the forging weight of a rolled, fan case front, ring made of Ti-6Al-4V. This was achieved by optimizing the ring-rolling process in which
More informationPlanning and installation instructions
Planning and installation instructions Stofix Oy Ahlmaninkatu 2 E 40100 Jyväskylä Finland stofixgroup@stofix.com www.stofix.com 2 PLANNING AND INSTALLATION INSTRUCTIONS... 1 1 General... 3 2 Project Design...
More information