Catalog 2014 Adolf s Foundry Solutions
|
|
|
- Gyles Whitehead
- 6 years ago
- Views:
Transcription
1 Catalog 2014 Adolf s Foundry Solutions by: Adolf s Pattern Shop
2 Alignment Solutions Style ~A~ Alignment Insert Ai dia. Ai dia. Ai dia. Ai dia. Ai dia. Style ~A~ alignment inserts are available in four different sizes and have three different depths. These inserts are made out of A.B.S. plastic and will help fcoundries create a perfect match when mounted on: match plates, match boards, insert boards, ope & drag boards, and molding boxes. These alignment inserts can also be used in cold moding, airset, nobake and vaccum molding. Alignment Core Print ACP x 1.87 x 150 ACP x 2.5 x 100 ACP x 3.5 x 100 Alignment core prints are a great solution for aligning larger molds. These prints locate on a half inch hole. and are used in green-sand, no-bake and air-set molding. They are reversible and fit perfectly on either side of the cope and drag. Adolf designed his core prints with a sand-trap ring and an additional.125 inch height for clearance to collect sand that rubs off during mold closure. The sandtrap rings are absolutely necessary for no-bake and air-set molding. Wood Cutting Tools Adolf s wood cutting tools are specifically design to support styles A & B alignment inserts. They are made of hardened high speed steel and will create a perfect diameter on all your match boards or molding boxes. The cutting blades are interchangeable with our cutting blade holder. This allows pattern shops and foundries to explore multiple options in creating different diameters with limited tooling cost. Not intended for aluminum. WCT-120 WCT-121 WCT-122 WCT-123 WCT-124 WCT-125 WCT in cutter w. ⅜ pilot hole..75 in. cutting blade holder. 1.5 in. cutting blade in. cutting blade. 2.0 in. cutting blade. 2.5 in. cutting blade. 3.5 in. cutting blade. 2
3 Applying registration marks Alignment Solutions Ai dia. Ai dia. Ai dia. Ai dia. Z Tol. Ai dia. Z Tol. Ai dia. Z Tol. Style ~B~ alignment inserts are specifically designed for match-plates, match boards and automated molding machines. With both halves telescoping and inter-locking at the parting through the diameter. These inserts will create the deepest match buttons possible and can be mounted on either side of the cope and drag. Our grey zero tolerance insert are designed for the green sand only. Alignment Core Boxes Adolf s alignment core-boxes are lightweight, compact, and produce perfectly round and seamless cores. They are available in two, four, seven, and thirteen cavity core-boxes. All core-boxes are made of DuraTech tooling material for optimal wear resistance and effortless mold releasing properties. 3
4 Pouring & Filtering Solutions Single Cavity Filtering Basins PFB sq. x 1 in. filter PFB dia. X 1 in. filter PFB sq. x 1 in. filter PFB sq. & 5 sq. filters PFB sq. x 1 in. filter Adolf s single cavity filtering basins are lightweight molds made out of DuraTech tooling material. Imagine a combination of pouring, filtering, and riser technologies all in one basins. With several different basins to choices from, foundries can now use their own no-bake sand to create an endless supply of filtering basins. Additional savings can also be increased by utilizing sand reclamation. Double Cavity Filtering Basins PFB sq. filters PFB sq. & 3 sq. filters PFB sq. & 3 dia. PFB sq. & 3 sq. PFB dia. x.5 filter Our double cavity filtering basins are also made of DuraTech tooling material. With twice the value an our single cavity filtering basins, foundries can actually increase productivity and profit by customizing these basins into 4 and 6 cavity basins. One customized six cavity filtering basins has already produced over 2 million cores and is still operational. Riser Rings PBR id. x 6 od. x 2.75 h PFB id. x 7.5 od. x 3 h PFB id. x 11 od. x 2.75 h PFB id. x 11 od. x 6 h Adolf s riser rings are lightwieght molds made out of DuraTech for effortless mold releasing properties. Just spray once a day with a silcone base releasing agent and have years of worry free service. 4
5 Filtering Basins Runner Filtering Basins Filtering basins for the running system are an alternative filtering method used in the vacuum molding and horizontal filtering processes. Adolf s filtering basins are available in eight sizes and come with single and double filtering outlets. All filtering basins can be easily adapted to a running system and are secured with wood screws. Single Outlet Double Outlets PFB sq. x 1.25 in filter PFB-206 PFB-205/Sand saver Pouring Basins Adolf s pouring basins are lightweight molds made out of DuraTech tooling material. They support nobake, greensand, air-set, and flaskless molding. FBR sq. x.75 in. filter FBR sq. x.75 in. filter PFB-220 Single face vortex reducing pouring basin. FBR sq. x.5 in. filter FBR sq. x.5 in. filter PFB-221 Pop-off riser or small pouring basin. FBR sq. x 1 in. filter FBR sq. x 1 in. filter PFB-222 Tilt faced pouring cup FBR sq. x 1 in filter FBR sq. x 1 in filter 5
6 Sprue Solutions 1 14 Inch Sprues Adolf s 14 inch Sprues are made of DurTech tooling material for effortless mold releasing properties. They come in three different sizes: 1¼, 1½, and 1¾ inches with a 2º draft angle. They are designed to support foundries that utilize extra-long down sprues in their molding process. LDS d x 2.25 d w. 20 draft LDS d x 2.50 d w. 20 draft LDS d x 2.75 d w. 20 draft Sprue Filtering Plug DFP-310 2" dia. filter 8 in. hieght w. 20 draft DFP-311 3" dia. filter 8 in. hieght w. 20 draft DFP-312 4" dia. filter 8 in. hieght w. 20 draft DFP-313 5" dia. filter 8 in. hieght w. 20 draft Adolf designed his sprue filtering plugs which includes a break off notches to locate on a half inch pin that can be either mounted on a pattern or on your runner system. These plugs utilize circular cermaic filters and come in four different sizes ( 2, 3, 4, 5 inches diameters) to meet your foundry s needs. Like all of our orange tooling Adolf s sprue filtering plugs are made out of DuraTech tooling material. 6
7 Pop-Up Sprues Adolf s pop-up sprues are manufactured to locate on a half inch pin and come in either as soft base, solid base or solid core construction. Our pop-up sprue can be mounted on either the pattern or your runners. They are available in nine different sizes and used in jolt and squeeze box molding. They are made of compressible DuraTech tooling material. PDS sq. x 2.5 sq. x 6 in. PDS sq. x 2.0 sq. x 8 in. PDS dia. x 3.5 sq. x 8 in. PDS dia. x 3.0 dia. x 5 in. PDS-324 pop-up sprue under compression PDS dia. x 3.5 sq. x 12 in. PDS dia. x 3.5 dia. x 6.5 in. PDS dia. x 4.0 dia. x 7.5 in. PDS dia. x 3.5 sq. x 8 in. PDS dia. x 3.5 sq. x 10 in. 7
8 Spure Solutions 2 Single Faced Sprues ADB dia. x 3.0 dia. 2.5 in. height ADB dia. x 3.0 dia. 2.5 in. height ADB dia. x 3.0 dia. 3.0 in. height ADB dia. x 3.0 dia. 2.5 in. height ADB dia. x 3.0 dia. 3.0 in. height Adolf s single faced sprues are specifically designed to support foundries that utilize automated molding technology. All basins are made from DuraTech Tooling Material for optimal wear resistance. Our single faced sprues come in several sizes, that vary in diameter and height to support your foundries automated molding needs. Pyramid Style Sprues ADB dia. x 2.5 sq height ADB dia. x 2.5 sq height ADB dia. x 2.5 sq height ADB dia. x 2.5 sq height ADB dia. x 2.5 sq height Adolf s pyramid sprues are new to our inventory. Our basins are designed to reduce the vortex in automated molding machines. These new down sprues have a 2.50 inch square base and taper to 1.25 or inches in height. All of Adolf s sprue basins are supported by our sprue pins. New Three Faced Sprues ADB dia. x 3.5 dia. 3.5 in. height ADB dia. x 3.0 dia. 3.5 in. height ADB dia. x 3.0 dia. 3 in. height Adolf s three faced sprues are the newest addition to our vortex reducing sprue technology. Plus we have currently adapted our tooling to support both Hunter and Sinto automated moulding machine on these basins. All basins are made of DuraTech tooling material to give foundries a quality product with optimal wear resistiacne and effortless mould releasing proterties. 8
9 Single Faced Sprues Automated Spures & Pins ADB dia. x 3.5 dia in. height ADB dia. x 3.0 dia. 3 in. height ADB dia. x 3.0 dia. 3.5 in. height ADB dia. x 3.5 dia. 3.5 in. height Pyramid Style Sprues Filtering Sprue ADB dia. x 2.5 sq height ADB dia. x 2.5 sq height ADB dia. x 2.5 sq height ADB dia. X sq in. Height Utilizes a 55 mm filter Sprue Pins Adolf s sprue pins are are made of DuraTech for optimal wear resistance. and specifically designed to support foundries which utilize automated molding technologies. New Four Faced Sprues Our sprue pins range in sizes from.625 inch in diameter to 1.25 inches in diameter, and from 5½ to 7½ inches in height. ADB dia. x 3.5 dia. 3.5 in. height ADB dia. x 3.0 dia. 3.5 in. height ADB dia. x 3.0 dia. 3 in. height Adolf s four faced sprues are the newest addition to our vortex reducing sprue technology. Plus we have currently adapted our tooling on our 3 and 4 faced sprues to support both Hunter and Sinto automated moulding machine. All basins are made of DuraTech tooling material to give foundries a quality product with optimal wear resistance and effortless mould releasing properties. 9
10 Metallurgy Solutions Test Bars & Inter-Changeable Bars TBB-400 ASTM: A-871 Steel Keel Block TBB-401 ASTM: A Ductile Iron TBB-402 ASTM: A-48 Gray Iron TBB-403 ASTM: A-48 Gray Iron Adolf s test bar basins come in five different sizes and support A.F.S. standards and adhere to ASTM specifications: A-48, A , and A-781. All test bars and basins are made out of DuraTech tooling material. Our Inter-changeable test bars support our 1, 2 and 4 cavity test bar basins. Test Wedges & Inter-Changeable Wedges TWB-410 ASTM: A W Test Wedge TWB-411 ASTM: A W Test Wedge TWB-412 ASTM: A-367 Inter-changeable Wedges TWB-413 ASTM: A W Test Wedge Adolf s test wedge basins coming in four different sizes, support A.F.S. standards and adhere to ASTM specification: A-367. All of our inter-changeable test wedges and basins are made out of DuraTech tooling material for optimal wear resistance and durability. Test Coupon Basin TCB-420 Adolf s test coupon basin is made out of DuraTech tooling material. This basins adhere ASTM specifications: A-367 and A
11 Metallurgy Solutions Test Bars & Inter-Changeable Bars TBB-404 ASTM: A-48 Gray Iron TBB-405 ASTM: A dia. x 6 in TBB-406 ASTM: A dia. x 8 in TBB-407 ASTM: A dia. x 8 in Inter-Changeable Wedge TWB-414 ASTM: A W Test Wedge 50 lbs. PIG Boxes Adolf s PIG boxes create a 50 pounds size ignots designed to help foundries have more control over their inventory and formulating alloys. Our Pig boxes are light weight molds made out of DuraTech to provide optimal wear resistance, durability, and effortless mold releasing properties. PIG-501 PIG-502 PIG-501 produces a rectangular casting 12 x 6 x 3. PIG-502 produces a diameter casting of 10 x 2 ¾. 11
12 Silent Adjustable Vibrator Adolf s silent adjustable vibrator is a time efficient solution for any molding line, and helps to prevent lower back injuries. Our vibrator is powered by a 3-phase, 60 hz., ¾ horse power electrical motor. The motor has enclosed counter weights to ensure safety. When set up properly the adjustable vibrator will set sand within seconds. We recommend attaching this vibrator to a 24 x 30 x 27 steel table. The motor can be mounted either vertically or horizontally depending on your needs; table capacity should not to exceed 1000 lbs. Larger table are available upon request. DuraTech Tooling Material DuraTech Tooling Material is a lightweight orange polyurethane plastic designed for high production runs. It is known in the foundry industry for its exceptional mold releasing properties, optimal wear resistance, and its extra-ordinary strength and durability. This amazing tooling material is available in sheets from ⅛ - 2 inches in thickness by 31.5 inches by 55 inches; custom blocks, rods, tubing are also available. For more information about Adolf s Foundry Solutions contact Ricardo Volkmann at Adolf s Pattern Shop Inc. Contact Information Adolf s Pattern Shop Inc. 425 NE 80th Ave Portland, OR Ricardo Volkmann Operation/Sales ricrdo@foundrysupply.com ph fx Website:
Casting Process Part 2
Mech Zone Casting Process Part 2 (SSC JE Mechanical/ GATE/ONGC/SAIL BHEL/HPCL/IOCL) Sand Casting cope: top half drag: bottom half core: for internal cavities funnel sprue runners gate cavity {risers, vents}
FLOOR AND AREA DRAINS
Pictorial Index Product Recommendations Floor Drain Selection Factors Load Rating Grate Free Area Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations FLOOR AND AREA
STAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
With Dura-Bar you will be able to:
Dura-Bar Stock List Dura-Bar is an engineered iron designed to meet our customers most critical requirements. It is manufactured to strict process controls that provide world-class quality and uncompromising
SECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
A-Series Aluminum Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or
Resource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
SECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
Risering System Design
Section two Risering System Design Please note: Risering must be done before gating system can be calculated. Bottle shaped (Heine) risers are now the riser of choice in the majority of systems. 19 2.0
Metal Forming Process. Prof.A.Chandrashekhar
Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which
1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
![SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)](/thumbs/77/75601156.jpg "SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)")
SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter
COPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
Cable Terminators COMMERCIAL AND INDUSTRIAL FITTINGS: RIGID AND IMC CONDUIT FITTINGS. Applications
Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Terminator The Terminator body is deep enough to provide an ample compound chamber
Standard Test Methods for Tension Testing of Metallic Materials 1
Designation: E8 04 An American National Standard American Association State Highway and Transportation Officials Standard AASHTO No.: T68 Standard Test Methods for Tension Testing of Metallic Materials
Meter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
OVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
Current Standard Plates including Transmittal Letters are available on the web at:
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Project Management and Technical Support, Design Support Section TRANSMITTAL LETTER NO. (6-03) MANUAL: Standard
This guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
SECTION 14651 FREE STANDING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and industrial
www.flexyvacuumcups.com Vacuum Cups Catalog 2016-2017 About Flexy Vacuum Cups About Flexy Vacuum Cups About Flexy Vacuum Cups From my long experience buying vacuum cups, I know customers buying branded
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com BORING TOOLS BORING TOOLS INDEX BORING BARS CARBIDE TIPPED...1
I. Overview. General Considerations
I. Overview Thru-feed grinders offer an economical means to surface grind small parts in an efficient manner. There are several different models of these grinders available, though the Speedfam Thru-Feed
Process Design Optimization through Numerical Experimentation for a Brake Disc Casting
Materials Transactions, Vol. 49, No. 6 (2008) pp. 1372 to 1379 #2008 The Japan Institute of Metals Process Design Optimization through Numerical Experimentation for a Brake Disc Casting Chun-Ping Yeh 1;
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
E-Series Steel Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 E-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an E-Series Gantry Crane into a competitive bid project or application.
DESIGN AND ANALYSIS OF RISER FOR SAND CASTING
DESIGN AND ANALYSIS OF RISER FOR SAND CASTING C. M. Choudhari, Nikhil S. Dalal, Akshay P. Ghude 1, Pratik P. Sankhe, Ashutosh M.Dhotre Mechanical Department, Fr.C.Rodrigues Insitute of Technology, Vashi,
YARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
Suspension Systems for Acoustical Lay-in Ceilings Seismic Design Categories D, E & F
NWCB Technical Document SUSPENDED CEILINGS 401 Suspension Systems for Acoustical Lay-in Ceilings Seismic Design Categories D, E & F 10/09 This document has been revised based on current Building Code standards.
Smarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
SECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
TW Series THRU-WALL BARRIER Cable/Conduit Sealing Device
TW Series THRU-WALL BARRIER Applications: THRU-WALL BARRIER cable/conduit sealing device is used wherever there is a need to seal cables or conduits penetrating fireor non-fire-rated walls, ceilings, floors,
SOLAR SHADING SYSTEMS - Manual Solar Shade SECTION ROLLER WINDOW SHADES
PART 1 - GENERAL SECTION 122413 - ROLLER WINDOW SHADES 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Extruded Aluminum Frame Conveyors
Conveyors and Automation Systems www.emicorp.com Extruded Aluminum Frame Conveyors 216-535-4848 EMIcorp.com 216-535-4848 EMI s Extruded Aluminum Frame Conveyors Deliver a Sturdy, Lightweight Construction
Outline CASTING PROCESS - 2. The Mold in Casting. Sand Casting Mold Terms. Assoc Prof Zainal Abidin Ahmad Universiti Teknologi Malaysia
Outline CASTING PROCESS - 2 Assoc Prof Zainal Abidin Ahmad Universiti Teknologi Malaysia Casting Molds Gating system pouring basin, sprue, runner, gate Riser Core Heating and melting Melting furnaces Pouring
This guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
GORBEL PRODUCT SPECIFICATIONS 2010 Gorbel, Inc., P.O., Box 593, Fisher, New York 14453-0593 PHONE: 800-821-0086, FAX: 585-924-6273; WEBSITE: www.gorbel.com November SECTION 41 22 31PRIVATE FREE STANDING
Welding Accessories
Welding Accessories www.airliquide.ca 1-800-817-7697 Welding Accessories BLUESHIELD Welding Cables Blueshield Welding Cables: Excellent flexibility (stays flexible at -50 C) Abrasion resistant Oil, solvent
SECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
SECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 12 2113 - LOUVER BLINDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS
EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS TMX Saws A History of European Quality & Craftsmanship The history of TMX saws dates to 1921 Poland with manufacturing
ITEM D-701 PIPE FOR STORM DRAINS AND CULVERTS
ITEM D-701 PIPE FOR STORM DRAINS AND CULVERTS 701-1 DESCRIPTION 701-1.1 This item shall consist of the construction of pipe culverts, and storm drains, removal of existing storm pipes, connections to existing
Attachment A-Flagpole(s) Specifications
Attachment A-Flagpole(s) Specifications PART 1-GENERAL 1.1 SCOPE A. The scope of work includes the removal of existing flagpole(s) and associated concrete bases, and installation of a new flagpole(s) and
INDUSTRIAL GUARDRAIL SYSTEMS
INDUSTRIAL GUARDRAIL SYSTEMS STRONGEST GUARDRAIL ON THE MARKET MANUFACTURED IN THE U.S.A. BEST PRICES MOST VARIETIES HEAVY DUTY ONE-LINE OR TWO-LINE Posts: 4 Sched 80 pipe Rail: 6 Sched 40 pipe Sleeved
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ABP SERIES OF AUTOMATIC BLISTER PACKAGING MACHINERY Ridat ABP series of machines are some of the most advanced models in the comprehensive range of Ridat blister packaging equipment.
Standard Test Methods for Tension Testing of Metallic Materials 1
Designation: E8/E8M 16a American Association State Highway and Transportation Officials Standard AASHTO No.: T68 An American National Standard Standard Test Methods for Tension Testing of Metallic Materials
STUDY OF PISTON SLEEVE MANUFACTURED BY SAND CASTING PROCESS TO REDUCE REJECTION RATE USING SIMULATION SOFTWARE
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN 2249-6890 Vol. 3, Issue 2, Jun 2013, 161-168 TJPRC Pvt. Ltd. STUDY OF PISTON SLEEVE MANUFACTURED BY
SPECIFICATION FOR REINFORCED SOIL WALL
SPECIFICATION FOR REINFORCED SOIL WALL 1.0 EXTENT OF WORK The work shall consist of Reinforced Soil walls built in accordance with this specification and in conformity with the lines, levels and details
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
SECTION XXXX POLYMER CONCRETE PUMP STATIONS
SECTION XXXX POLYMER CONCRETE PUMP STATIONS PART 1 GENERAL 1.1 SUMMARY A. This specification shall govern for the furnishing of all work necessary for installation of polymer concrete pump stations to
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-10 22 13 (August 2016) --------------------------- Preparing Activity: NAVFAC Superseding UFGS-10 22 13 (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
Syntron Parts Feeder Bowls
Syntron vibratory parts feeders Syntron Parts Feeder Bowls Selecting the proper bowl for your specific parts feeding application is critical. Complete information concerning the part and the application
SECTION ALUMINUM GATES
P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,
Underground fire hydrants
Underground fire hydrants The company was founded in 987 by transforming the former CSA, which was a trading company dealing with pipes and valves for water networks, into a manufacturing company, through
Modular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
MTS Zero Point Workholding System. The universal interface
MTS Zero Point Workholding System The universal interface 2 The consistent workholding system Single palletizing, multiple palletizing, consistent palletizing. MTS palletizing SySTeM 3 EROWA MTS (Modular
5 PRODUCTION COST ESTIMATION. PRODUCTION COST ESTIMATION : Instructional Objectives
Production Cost Estimation 129 5 PRODUCTION COST ESTIMATION PRODUCTION COST ESTIMATION : Instructional Objectives After studying this unit, the student should be able to : (i) Know how cost costimation
Northpointe Renovation EPN #1701 F/A Project #17027 September 8, 2017
SECTION 055213 - PIPE AND TUBE RAILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
1 1 4" FRAMING SYSTEM
4" FRAMING SYSTEM A000 (4 Gauge)...6-70 A00 (4 Gauge)...7-7 A4000 ( Gauge)...7-74 A000 (4 Gauge)... 7 Channel Nuts and Closure Strips...76-77 Flat Plate Fittings... 77 Ninety Degree Fittings...77-78 Z
CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL
SUDAS Standard Specifications Division 9 - Site Work and Landscaping Section 9080 - Concrete Steps, Handrails, and Safety Rail CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL PART - GENERAL.0 SECTION INCLUDES
New theory on how casting filters work
New theory on how casting filters work The desire for optimised casting quality and the production costs to achieve this quality must be kept within a reasonable relationship. Today ceramic filters are
Investigation of Shrinkage Defect in Castings by Quantitative Ishikawa Diagram
A R C H I V E S of F O U N D R Y E N G I N E E R I N G DOI: 10.1515/afe-2017-0032 Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (2299-2944) Volume 17
Automatic hydraulic laboratory presses in two- and four-post models up to 30 ton clamp capacity
Auto Series compact automatic Automatic hydraulic laboratory presses in two- and four-post models up to 30 ton clamp capacity Access Door Clear, impact resistant polycarbonate door permits observation
Meter Connection Products: Overview
: Overview Georg Fischer Central Plastics entered the meter connection business in 1955 with the design and introduction of the insulated meter swivel and insulated union. We understand the critical nature
Complete Modern Drainage System
Complete Modern Drainage System Ideal for collection of high surfacewater flows in large domestic & light commercial applications Made in Australia from tough, durable and light-weight UV-stabilised recycled
Chapter 14: Metal-Forging Processes and Equipments
Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 14: Metal-Forging Processes and Equipments Chapter Outline Introduction Open-die Forging Impression-die and Closed-die Forging Various
MANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT II Hot & Cold Working - Drawing & Extrusion Drawing Drawing is an operation in which the cross-section of solid rod, wire or tubing is reduced or changed in shape by pulling
Standards for Testing and Rating Shoring Equipment
ANSI/SSFI SH300-2007 American National Standard Standards for Testing and Rating Shoring Equipment Scaffolding, Shoring & Forming Institute, Inc. Sponsor: Scaffolding, Shoring & Forming Institute, Inc.
SECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
Projector mounts. CMA115 6 (152 mm) CEILING PLATES. concrete. vaulted. CMA330 8 (203 mm) CMA700 6 (152 mm)
CEILING PLATES CMA105 4 (102 mm) Flat Ceiling Plate General purpose ceiling plate with small mounting footprint Use with short columns or when mounting space is limited concrete CMA330 & CMA345 CMA100
COMPACT STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT. FLEXIBLE AND ECONOMICAL Entry level to vertical sawing technology
WWW.STRIEBIG.COM STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT COMPACT FLEXIBLE AND ECONOMICAL Entry level to vertical sawing technology COMPACT / COMPACTAV ENTRY LEVEL TO QUALITY AND PRECISION
CTP STITCH-TIE AGAIN! Quick and easy way to re-anchor existing veneers to back-up structures.
Helical Wall Tie System for Stabilizing Veneers and Structural Repair AGAIN! ANOTHER CTP SOLUTION! CTP STITCH-TIE Quick and easy way to re-anchor existing veneers to back-up structures. Brick to Concrete
Pipe and Casing Cutting
Pipe and Casing Cutting A Buyers Guide Rev 1.2 www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence,
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
HIGH MAST CAMERA POLE ASSEMBLY GENERAL
10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera
TRUMPF style Special Tools
2014 TRUMPF style Index T1. Countersink and marking tool T2. Screw solutions - Countersink - Up T3. Countersink after pre pierce - Down T4. Emboss - Down T5. Emboss - Up T6. Cluster T7. Louver set - Up
FrameFast Shoring System
FrameFast FrameFast Shoring System The FrameFast shoring system is engineered for maximum strength, labor productivity and reuse capabilities. FrameFast components feature high strengthto-weight ratios.
It is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
SECTION Summit Phenolic Lockers (Solid Phenolic Lockers)
SECTION 10 51 00 Summit Phenolic Lockers (Solid Phenolic Lockers) Part 1-General 1.01 Summary A. Section includes: solid phenolic lockers solid phenolic benches 1.02 Submittals A. Submittals: Comply with
Easy to Use A7 Saves You Time and Money
ADHESIVE ANCHORING SPECIALISTS Easy to Use Saves You Time and Money DESCRIPTION/SUGGESTED SPECIFICATIONS* Fast Dispensing, Fast Curing The acrylic resin and hardening agent are completely mixed as they
Trench Duct Class Catalog 5230CT9601R10/08
5230CT9601R10/08 2009 Class 5230 CONTENTS Application.................................................5 Unassembled Trench Duct Components.........................6 Factory Assembled Trench Duct..............................11
Page 1 PRODUCT DESCRIPTION SECTION SECTIONAL OVERHEAD DOORS MODEL 900 PRODUCT FEATURES
2016-03-24 Page 1 SECTION 08360 SECTIONAL OVERHEAD DOORS DESCRIPTION MODEL 900 PRODUCT FEATURES Sectional steel overhead doors, industrial grade heavy duty construction. BASIC USES / RELATED USES Sectional
Mold Design. Equipment Drying Molding Conditions Troubleshooting Tips
Introduction About This Injection Molding Processing Guide This injection molding guide contains general injection molding parameters that apply to all GE engineering thermoplastic resins. Mold Design
TITEN HD Heavy Duty Screw Anchor for Concrete & Masonry
TITEN HD Heavy Duty Screw Anchor for & Masonry The Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes
Tile / Flooring / Drywall and Ceiling Tools
Tile / Flooring / Drywall and Ceiling Tools 93 Easy assembly Will work with most cordless or corded drills malco tool book better ideas for the real world. TurboShear Shear Power for Fiber Cement Backer
12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
SECTION DECORATIVE METAL AND GLASS RAILING
SECTION 05 73 00 DECORATIVE METAL AND GLASS RAILING PART 1 GENERAL 1.1 SUMMARY A) This section includes both standard and custom handrails as shown in the contract drawings. B) These include aluminum,
Brise Soleil Fixed Sunshades
Brise Soleil Fixed Sunshades Introduction Linel is headquartered in Mooresville, Indiana and is part of the Mestek Architectural Group. In addition to Linel, Mestek s architectural activities include American
Objectives. This chapter provides fundamental background on processes of drawing of rods, wires and tubes.
WIRE DRAWING Objectives This chapter provides fundamental background on processes of drawing of rods, wires and tubes. Mathematical approaches for the calculation of drawing load will be introduced. Finally
Portalcast Block Cutting and Casting System. Quickly cut and cast a precision mold and mount the casting to a blocking tray.
Portalcast Block Cutting and Casting System Quickly cut and cast a precision mold and mount the casting to a blocking tray. Portalcast Block Cutting and Casting System Hundreds of radiation therapy departments
STULZ-SICKLES STEEL COMPANY
STULZ-SICKLES STEEL COMPANY SINCE 1916 Providing Years of Wear Resistant Service to the Railroad Industry Railroad ELIZABETH, NEW JERSEY COLTON, CALIFORNIA 800-351-1776 800-572-5809 www.stulzsicklessteel.com
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS ITEM 00663 TRAFFIC BUTTONS & PAVEMENT MARKERS 663.1 Description. This item shall consist of furnishing and installing traffic buttons and reflectorized pavement markers and jiggle
Keeping the Customer First. Tungaloy Catalogue TE0707-E2. Cutting Tools.
Keeping the Customer First Tungaloy Catalogue TE0707-E2 2007 Cutting Tools www.tungaloy-eu.com Selection Guides List of... 410 Selection Guides... 412 Specifications Solid Carbide s For High Speed Deep
Pick Smarter. Pick Better. Pick UNEX. MODULAR FLOW-THROUGH WORK STATIONS FOR ASSEMBLY AND LINESIDE STORAGE
MODULAR Pick Smarter. Pick Better. Pick UNEX. FLOW-THROUGH WORK STATIONS FOR ASSEMBLY AND LINESIDE STORAGE UNEX Flow Cells keep processes and profits flowing Accelerate productivity. Improve Ergonomics.
Technical Services Information Bureau
Technical Services Information Bureau INSTALLING ACOUSTICAL LAY-IN TYPE CEILINGS IN SEISMIC REGIONS AUGUST 2009 UPDATED MAY 2017 TECHNICAL BULLETIN This document covers the installation practices recognized