Tel: ,
|
|
|
- Morgan Goodwin
- 6 years ago
- Views:
Transcription
1 Iron Fence Fittings SPC06-5/8 1-1/4" W, 4" H SPC07-5/8 2" W, 4" H 58FLOWER 2-1/2" W, 4" H SPC08 1-1/4" W, 1-1/8" H SPI10 1-1/8" W, 1" H SPC113 Fits over 1" x 1" 2" W, 8" H PCB02 PCP05 PCP06 2-1/2" W, 3-5/8" H 2-1/2" W, 4-3/4" H 1 2-1/2" W, 5" H
2 Iron Fence Fittings DPC02 2-1/2" W, 1-1/2" H PCP01 2-1/2" W, 1-1/4" H PCP100 Fits over 2-1/2" x 2-1/2" 2-3/4" W, 1-1/8" H PCB25 Fits over 2-1/2" x 2-1/2" 3" W, 4" H PCP108 Fits over 2-1/2" x 2-1/2" 3" W, 5-1/2" H PCP101 Fits over 3" x 3" 3-1/2" W, 1-1/2" H PCB105 Fits over 3" x 3" 3-1/2" W, 4-3/8" H PCP102 Fits over 4" x 4" 4-1/2" W, 1-1/2" H PCB04 Fits over 4" x 4" 4-1/2" W, 5-1/2" H 2
3 Iron Fence Fittings APC09 with Welding Tabs 4" W, 3-3/4" H APC08 with Welding Tabs 6" W, 7-1/4" H APC02 with Welding Tabs 6-7/8" W, 16" H APC03 with Welding Tabs 6-7/8" W, 13" H APC05 with Welding Tabs 6-3/4" W, 17" H APC04(A0412) with Welding Tabs 7-3/8" W, 13" H APC06 with Welding Tabs 7-1/4" W, 15" H APC07 with Welding Tabs 7-1/4" W, 15" H AR4 with Welding Tabs Outside Diameter, 3-3/4" 3
4 Iron Fence Fittings AR5 with Welding Tabs Outside Diameter, 5 AD04 with Welding Tabs 3-3/4" W, 3-3/4" H AC04 with Welding Tabs 3-3/4" W, 3-3/4" H A0902 Fits onto 1" x 1" 3-1/2" W, 1-3/8" H BSI09 Fits onto 1" x 1" 3-1/2" W, 1-3/8" H PC10 with Set Screw Fits over 1" x 1" 2-1/2" W, 2-1/4" H PC58 with Set Screw 1-7/8" W, 1-7/8" H ASC01 Fits over 1" x 1" 3-7/8" W, 2-1/16" H ASC114 Fits over 1-1/4" x 1-1/4" 4" W, 2" H 4
5 Iron Fence Fittings ASC112 Fits over 1-1/2" x 1-1/2" 4" W, 2" H ASC02 4" W, 2" H BSIS Fits onto 1" x 1", Horizontal Swivel 3-1/8" W, 2" H BSIS-1 Fits onto 1" x 1", Vertical Swivel 1-3/4" W, 2" H S03035D Steel, Zinc Plated 3-1/2" W, 3-1/2" H, Band Width, 1/2" S03035R Steel, Zinc Plated Outside Diameter: 3-1/2", Band Width, 1/2" CP001 Steel, Zinc Plated Fits over 1" x 1" 4" SQ W, 7/8" H CP002 Steel, Zinc Plated 5" SQ W, 1" H CP025 Steel, Zinc Plated Fits over 2-1/2" x 2-1/2" 5" SQ W, 1" H 5
6 Iron Fence Fittings S0101 Post, 2" x 2", Rail, 1" x 1" S0101A Aluminum, Powder Coated Post, 2" x 2", Rail, 1" x 1" S0102 Post, 2" x 2", Rail, 1" x 1" S0103 Post, 2-1/2" x 2-1/2", Rail, 1-1/2" x 1-1/2" S0104 Post, 2-1/2" x 2-1/2", Rail, 1-1/2" x 1-1/2" S0105 Post, 3" x 3", Rail, 1-1/2" x 2-1/2" S0105A Aluminum, Powder Coated Post, 3" x 3", Rail, 1-1/2" x 2-1/2 S0106 Post, 3" x 3", Rail, 1-1/2" x 2-1/2" CNA14 1/4 Diameter, 1-1/4" Long 6
7 Gate Hardware CNA38 3/8 Diameter, 2-1/8" Long SGH01 U Hinge, Gate Frame, 1" x 1" 4-1/4" W, 3" High JB4 Diameter 1/2", 4" Long JB6 Diameter 1/2", 6" Long SGH02 2" x 2", 13GA (0.08" Thickness) SGH /4" x 3", 12GA (0.100" Thickness) SGH03 3" x 3", 12GA (0.10" Thickness) SGH04 4" x 4", 12GA (0.10" Thickness) SGHD03 3" x 3", 11GA (0.125" Thickness) 7
8 Gate Hardware SGHD04 4" x 4", 7GA (0.178" Thickness) SGL01 Steel, Zinc Plated, or Powder Coated Catcher, 1-1/4 W" x 2" H Finger, 5" Long SSBL12 Diameter 3/8" Pin, 13GA, Heavy Duty SCB12-18 Diameter 1/2", 18" Long SCB12-24 Diameter 5/8", 24" Long SCB12-36 Diameter 5/8", 36" Long SGC-9 9" Long, Heavy Duty, Adjustable SGC-12 12" Long, Heavy Duty, Adjustable SGCH01 Catcher, 1-1/4 W" x 2" H Finger, 5" Long, Held on 1" x 1" Frame 8
9 Gate Hardware SGCH02 Post, 2" x 2", 13GA (0.08" Thickness) SGC02 Steel, Zinc Plated, or Powder Coated Post, 2" x 2", 13GA (0.08" Thickness) SCB02 Post, 2" x 2", 13GA (0.08" Thickness) SOB02 Post, 2" x 2", 13GA (0.08" Thickness) WLS Diameter 5/8", 4-1/2" Long JB Diameter 1/2", 4-1/2" Long JB58-5 Diameter 5/8", 5" Long JB34-6 Diameter 3/4", 6" Long SGL02 Catcher, Held on 2" x 2" Post Finger, 5" Long 9
10 Gate Hardware 3 3 Post 5 5 Base 2-1/2 2-1/2 Post 5 5 Base 2 2 Post 5 5 Base 1-1/2 1-1/2 Post 4 4 Base 1-1/4 1-1/4 Post 4 4 Base 1 1 Post 4 4 Base LION-L LION-R Welding Tabs 14-1/2" W, 29-1/2" H Welding Tabs 14-1/2" W, 29-1/2" H 10
11 Wrought Iron Gates 11
12 Laser or Plasma Cutting Laser or plasma cutting are applying to fabricate customizing design, indoor screens, fences, gates,,letters, numbers, and more. Material can be zinc plated carbon steel, stainless steel, aluminum, copper or brass. Customizing made letters and numbers: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
SECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
Modular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
Residential Commercial Industrial
Enhance your property with the elegance, beauty and durability of high strength aluminum fencing. Residential Commercial Industrial www.gemstonealuminum.com Why... We ship you what you order! We ve looked
MATERIAL SPECIFICATION FOR CHAIN-LINK FENCE COMPONENTS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1541 NOVEMBER 2005 (Reissued November 2010) MATERIAL SPECIFICATION FOR CHAIN-LINK FENCE COMPONENTS TABLE OF CONTENTS 1541.01 SCOPE 1541.02 REFERENCES
Code Compliance Research Report CCRR-0213
Code Compliance Research Report CCRR-0213 Issue Date: 08-04-2017 Renewal Date: 08-01-2018 DIVISION: 05 50 00 METAL FABRICATIONS Section: 05 52 00 Metal Railings REPORT HOLDER: Key Link Fencing & Railing,
Chapter 3 Shielded. Metal Arc Welding
Chapter 3 Shielded Metal Arc 1. SMAW Electrode 2 Filler metals for shielded metal arc welding are composed of a metal alloy core, covered by a flux coating. The core wire carries the current for welding
SECTION CHAIN LINK FENCES AND GATES (GALVANIZED) A. Fence framework, fabric, gates, and accessories.
SECTION 02830 CHAIN LINK FENCES AND GATES (GALVANIZED) 1.0 GENERAL 1.1 Section Includes A. Fence framework, fabric, gates, and accessories. B. Excavation for post bases; concrete footing for posts. C.
SECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
Flotation Docking Systems, Inc.
GENERAL SPECIFICATIONS The following data outlines the design calculations and specifications around which Flotation Docking Systems, Inc. products are constructed. The use of such information for contract
Barofor. Railing systems
Barofor Railing systems 60905BETAFLDR00Q_ENG.indd 2 30-03-2006 19:37:36 Versatile railing systems for many applications Barofor Deco Barofor Round Barofor Square 3 60905BETAFLDR00Q_ENG.indd 3 30-03-2006
SECTION CHAIN LINK FENCES AND GATES (PARK)
SECTION 02821 CHAIN LINK FENCES AND GATES (PARK) PART I GENERAL 1.1 SECTION INCLUDES A. Installation of chain link fences, and gate units provided by single source including erection accessories, fittings,
SECTION DECORATIVE METAL FENCES AND GATES
SECTION 32 31 19 SPEC WRITER NOTE: Use this section only for NCA projects. Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section
thermoweld The Contractors Choice GREAT PRODUCTS GREAT SERVICE GREAT PEOPLE
The Contractors Choice the Contractors Choice Founded in 1958, with locations in Tulsa and Broken Arrow, Oklahoma. is part of the Quality Brands of Continental Industries. TABLE OF CONTENTS THE PROCESS...4
Product Guide Specification
ALGRIP Manufactured by April 2017 104 North Maple Avenue P.O. Box 646 Leola, Pennsylvania 17540 Toll Free 800-345-8170 Fax 717-656-2041 Website www.algrip.com / www.rosstechnology.com E-mail sales@rosstechnology.com
MERCHANTS METALS. A. ASTM F552 Standard Terminology Relating to Chain Link Fencing
MERCHANTS METALS SECTION 32 31 13 COLORBOND CHAIN LINK FENCE AND GATES 2014 PART 1 GENERAL 1.1 RELATED DOCUMENTS A. DIVISION 01 - GENERAL REQUIREMENTS: Drawings, quality, product and performance requirements,
SECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
Box Rail. Single Box Rail Bracket
HANGERS & RAILS Box Rail Accordion Door Hangers Max. Door Weight (SWL) 450 lbs Meets ANSI/BHMA A156.14, Grade 1. Rail is carefully formed to give an even tread to hanger wheels. Packaging: Bundled without
SECTION CHAIN LINK FENCES AND GATES
SECTION 32 31 13 CHAIN LINK FENCES AND GATES SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Use this section in specifying permanent chain
Specifications for FL-100 Soffit Panel
Union Corrugating Company Specifications for FL-100 Soffit Panel SECTION 07410 METAL SOFFIT PANELS PART 1 GENERAL 1.1 DESCRIPTON A. Section Includes: 1. Preformed metal soffit panel system 2. Associated
1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.
SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
Keylar Shelving (QLD) Pty Ltd
Wall Strip Shelving Garage Option This product requires some assembly Wall Strip Shelving is an economical way of providing wall mounted shelving for any light duty application and is for indoor use only.
Westgate Entrematic, Parking Security Gates Section OVERHEAD SECURITY GATE Prepared by: Digicon Information Inc. Page 1
Prepared by: Digicon Information Inc. Page 1 This section includes overhead type Parking Security Gates, as manufactured by Westgate Entrematic, a division of Helton Group of Companies. DISCLAIMER: This
MADISON WATER UTILITY MADISON, WISCONSIN UNIT WELL 26 GENERATOR ADDITION AND MCC UPGRADES
AND MCC UPGRADES VICINITY MAP CALL DIGGERS HOTLINE 1-800-242-8511 TOLL FREE LEGEND, ABBREVIATIONS, INDEX GENERAL NOTES AND BENCHMARKS G-1 HIGH POINT ROAD SITE PLAN C-1 PROPOSED SITE PLAN C-2 4" DIA. SCH
SECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck)
SECTION 13125 ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
CHAIN LINK FENCES AND GATES
SECTION 02831 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.01 SUMMARY A. Alternate Material for Fence Post and Framing Material: Where schedule 40 galvanized steel is specified, the following will be accepted:
Custom fabrication in two weeks or less, guaranteed.
Custom fabrication in two weeks or less, guaranteed. Ask us how Ramco can now fabricate hardware on all manufacturers blank doors in 2 weeks or less. ramcometals.com got lead times? Ramco offers custom
Established DOC. NO : SSI / PROFILE Rev-03
Established 2002 www.sandskuwait.com C O M P A N Y P R O F I L E DOC. NO : SSI / PROFILE-001 - Rev-03 2 S & S International Company W.L.L. was Incorporated in 2009 with the primary objective of becoming
Comparison letter for MegaMet s MegaStorm Door against door construction details in FEMA 361 section 7.4.1
October 20, 2014 MegaMet Industries, Inc. P.O Box 635 Birmingham, AL 35201 ATTN: Re: Edward Wall ewalljr777@gmail.com Comparison letter for MegaMet s MegaStorm Door against door construction details in
RR-F-191/3D 14 May SUPERCEDING RR-F-191/3C July 22, 1981 FEDERAL SPECIFICATION SHEET
14 May 1990 ----------- SUPERCEDING RR-F-191/3C July 22, 1981 FEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST, METAL (CHAIN-LINK FENCE POSTS, TOP RAILS AND BRACES) (DETAIL SPECIFICATION) This Federal
B. Polyethylene samples shall be submitted for Owner approval of color and quality.
Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and
HEBEI KESHI METAL WIRE MESH CO., LTD. HORSE FENCE PANEL EASILY ASSEMBLED AND DISASSEMBLED PORTABLE AND PERMANENT FENCING
HEBEI KESHI METAL WIRE MESH CO., LTD. HORSE FENCE PANEL EASILY ASSEMBLED AND DISASSEMBLED PORTABLE AND PERMANENT FENCING SAFETY OF ANIMALS AND PEOPLE UTILITY AND VERSATILITY KESHI Horse Fence Panel About
SECTION CHAIN LINK FENCES AND GATES
SECTION 32 31 13 SPEC WRITER NOTES: Use this section only for NCA projects. Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section
A. Product Data shall be provided for each type of product indicated.
32 31 13 CHAIN LINK FENCES AND GATES SECTION 1 GENERAL 1.1 SUMMARY This Section includes the following: 1. Chain Link Fences 2. Gates for Chain Link Fences. See electrical specifications for electrical
American Metal Specialties, Inc.
American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best
ENGINEERING INFORMATION
ENGINEERING DATA ENGINEERING INFORMATION CONFIGURATION DESCRIPTION Bending Moment Test -- Rotational load applied to Ledger, secured to Rosette with Wedge SAFE WORKING LOAD (F.S. = 4:1) 6,154 lb-in Vertical
OSU PROJECT NO PAGE 1 02 NOV 2006 SECTION SUPPORTS AND ANCHORS
OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Supports and anchors for piping systems and equipment. 1.2 RELATED WORK SPECIFIED ELSEWHERE A. The provisions of Section 15050, Basic
Concealed hinges. Art.: Art.: Art.:6103 Art.:6127. Art.:6589 Art.:6128 Art.:
Concealed hinges Art.:6069.05 Art.:6069.04 Art.:6103 Art.:6127 Art.:6589 Art.:6128 Art.:6069.09 Art.:6069.14 Art.:6069.00 Art.:6588 Art.:6100 Art.:6075, F-81 Ordering example: Art.no 6001 01/02. 04/30
Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS
PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment
Item 442 Metal for Structures
Item 442 Metal for Structures 1. DESCRIPTION 2. MATERIALS Provide structural steel, high-strength bolts, forgings, steel castings, iron castings, wrought iron, steel pipe and tubing, aluminum castings
ATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 05/16/2016 Issued: 06/29/2015 Visit www.ati-es.com for current status Page 1 of 9 CPG Building Products
WIND SPEED AND DESIGN CRITERIA FOR FLEXIBLE FACE SIGNS CONSTRUCTED OF ABC EXTRUSIONS
WIND SPEED AND DESIGN CRITERIA FOR FLEXIBLE FACE SIGNS CONSTRUCTED OF ABC EXTRUSIONS 2005 EDITION This edition is based upon ASCE 7-98 recommendations for wind speed and wind loads. These have changed
SECTION DECORATIVE METAL AND GLASS RAILING
SECTION 05 73 00 DECORATIVE METAL AND GLASS RAILING PART 1 GENERAL 1.1 SUMMARY A) This section includes both standard and custom handrails as shown in the contract drawings. B) These include aluminum,
Series 510-I Thermal Heavy Commercial Projected Window
Windows Curtain Walls Entrances Storefronts Series 510-I Thermal 2-7 16 Heavy Commercial Projected Window Configurations Project-In Project-Out Casement Fixed Series 510-I retains an AAMA Architectural
WWW.SAMSUNGPJS.CO.KR SAMSUNG Pipe Joint System, is a manufacturing company, specialized in metal stamping, form rolling and pipe extrusion. With more than 20 years of manufactring experience, we are able
SECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA
106-5(a-f) 09 OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA These Special Provisions amend, revise, and where in conflict, supersede applicable sections of the 2009 Standard
voestalpine Additive Manufacturing Center Singapore Pte Ltd
voestalpine Additive Manufacturing Center Singapore Direct Metal Deposition, DMD. 30 th November 2017 www.voestalpine.com voestalpine Additive Manufacturing Center. Singapore Direct Metal Deposition» Company
Utility Cabinet System (UCS)
(UCS) The Ultimate in Stainless Steel Modular Walls UCS: Eliminates the need and the costs of constructing a traditional wall Provides easier access and faster installation of the utilities compared to
State of Maine Welding Technology Center 20 Hutcherson Drive Gorham, Me (207)
www.dgmachine.com State of Maine www.dgmachine.com Steve Sullivan Vice President Steve@dgmachine.com Cell: 207-653-7922 John Doran Sales Manager Johnd@dgmachine.com Cell: 207-233-4830 Precision Machining
No # Specifications Rate To Be Quoted. Unit Qty (in figures) (in words) Total Amount
Revised Schedule B as per corrigendum no. SASB/NIT/Works/818/2016/09 dated 28.01.2016. SCHEDULE B (FINANCIAL BID) B- a FABRICATION AND SUPPLY OF 200 EUROPEAN TYPE TOILETS (Rate to be quoted in Rupees both
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-10 22 13 (August 2016) --------------------------- Preparing Activity: NAVFAC Superseding UFGS-10 22 13 (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
ATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services PCA-125 Subject to Renewal: 05/16/2018 Issued: 05/24/2017 Visit www.ati-es.com for current status Page 1 of 9 CPG Building
Modular Floor Standing Enclosures Steel Powder-Coated MF1S SINGLE DOOR IP55
Modular Floor Standing Enclosures Steel Powder-Coated MF1S SINGLE DOOR IP55 IP Enclosures MF1S Range of powder-coated galvanised steel Modular Free Standing Enclosures for low voltage switchgear and controlgear
Division MEDICAL EQUIPMENT SUPPORT SYSTEMS PART 1 GENERAL
Division 11-7010 MEDICAL EQUIPMENT SUPPORT SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Contractor shall provide medical equipment support systems as indicated on the drawings. Support systems shall be as required
SWING DOOR SPECIFICATION
SWING DOOR A1 Work included: Furnish all necessary materials, labour and equipment for the complete installation of aluminum entrance doors, door frames and hardware as detailed on the drawings and specified
SECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS
Page 1 of 9 SECTION 10 2238.13 LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
Noise-Foil Acoustic Metal Panels Sound Absorption Systems for Industry & Commerce
Noise-Foil Acoustic Metal Panels Sound Absorption Systems for Industry & Commerce Abuse resistant metal jacketed constructions Lab certified acoustic performances Suitable for interior and exterior installations
TECHNICAL SPECIFICATION DANTECO HERMANNS. CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device
TECHNICAL SPECIFICATION DANTECO HERMANNS CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device 6058(20') x 2438(8') x 2591(8'6") MODEL NO. : CX09-20SNX1 SPEC. NO : CX09-20SNX1-S3
Contents. The Range The Finishes Application...09
MARINE HARDWARE Contents The Range...03 The Finishes...08 Application...09 The Range HINGES The prime application of the hinge is for in cabin use; however, they can also be used for some alternative applications
THE BOLTLESS CONSTRUCTION SYSTEM
www.eztube.com 1.800.833.2522 THE BOLTLESS CONSTRUCTION SYSTEM The E-Z TUBE BOLTLESS CONSTRUCTION SYSTEM is a versatile, light duty construction system that offers a cost effective and simple method of
PRESTON HEALTH SERVICES ARCHITECT'S NO. 2700
SECTION 09 5113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry
Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.
TRANSPORT II " 10.5" MOUNTING POSTS FENCE LINE POST. Classic gate shown GATE OPENING CANTILEVER GATE SAFETY WARNING
TRANSPORT ESTATE TRANSPORT IS TRANSPORT LINK ADAPTRACK 2"sq x.25" UPRIGHTS & DIAGONAL BRACES 1"sq x.125" PICKETS GATE TRACKS PRE-DRILLED FOR LEFT OR RIGHT OPENINGS FENCE LINE POST 13.8125" 10.5" MOUNTING
SECTION 9810 ACOUSTICAL SPACE UNITS BAFFLES AND CLOUDS
SECTION 9810 ACOUSTICAL SPACE UNITS BAFFLES AND CLOUDS PART 1 GENERAL 1.01 SUMMARY Specifier Note: Revise paragraphs below to suit project requirements. A. Section Includes: Custom fabricated acoustical
Designed For The Future, Backed By Years Of Experience SInce 1908.
8 G N I Sin SPINNNNING L SPI A TAL E MET E ME M C A M AC 0 9 1 ce Small Metal Spinnings Designed For The Future, Backed By Years Of Experience SInce 1908. Acme s metal spinning technology is targeted to
SECTION MASONRY ACCESSORIES
PART 1 GENERAL 1.01 SCOPE OF WORK A. Contractor shall furnish all labor, materials, equipment and incidentals required to provide masonry accessories as shown on the Contract Drawings and specified herein.
SPECIFYING AN O KEEFFE S LADDER
SPECIFYING AN O KEEFFE S LADDER When including an O Keeffe s Aluminum Ladder in your specification, use the following steps to choose the right ladder for your project. Step 1 Select Your Model 531 532
MACHINERY GUARDING SECTION
SECTION MACHINERY GUARDING De-fence is designed to comply with AS4024.1 when used as machinery guarding. Alternatively, its flexible design lends itself to many applications, including forklift separation.
Model Instruction Manual
Model CM-8822 Coating Thickness Gauge Instruction Manual reedinstruments www com Table of Contents Features... 3 Specifications... 3 Instrument Description... 4 Operating Instructions...5-6 Measuring Procedure...
OVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
Engineering Solutions For All Your Hang-Ups GARMENT CONVEYOR CATALOGUE GC-09.
Engineering Solutions For All Your Hang-Ups GARMENT CONVEYOR CATALOGUE GC-09 www.srsconveyors.com sales@srsconveyors.com 1 CATALOGUE MG-93 Why Choose SRS Conveyors Since 1962, SRS Conveyors have specialized
CARROLL COUNTY BUREAU OF PERMITS AND INSPECTIONS RESIDENTIAL CODE COMPLIANCE GUIDELINES FOR DECKS
CARROLL COUNTY BUREAU OF PERMITS AND INSPECTIONS RESIDENTIAL CODE COMPLIANCE GUIDELINES FOR DECKS Code Reference: Chapter 97, Code of Public Local Laws and Ordinances of Carroll County and The International
A. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
Aluminum-Framed Entrances and Storefronts
University of New Hampshire University of New Hampshire Scholars' Repository Division 08 Openings Chapter 5 Technical Construction and Renovation Standards 1-25-2013 084113 - Aluminum-Framed Entrances
HIGH MAST CAMERA POLE ASSEMBLY GENERAL
10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera
SECTION COMPOSITE EXTERIOR SHUTTERS AND ACCESSORIES
SECTION 10712 COMPOSITE EXTERIOR SHUTTERS AND ACCESSORIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Functional exterior shutters. B. Exterior shutter hardware. 1.2 RELATED SECTIONS A. Section 09900 - Paints
GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM
1 GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials and services to furnish and install SECURITY
Architectural Specifications, Section Phenolic Lockers
Architectural Specifications, Section 10500 Phenolic Lockers Hollman, Inc., 1825 W. Walnut Hill Lane, Irving, TX 75038, (972) 815-4000, www.hollman.com 1.0 GENERAL 1.1 SECTION INCLUDES A. Phenolic Lockers.
MODEL: SIGHT-LINE- COMMAND CENTER CONSOLES
2015 WINSTED CORPORATION 1) GENERAL DESCRIPTION 1.1 Sight-Line Command Center Consoles. SeeAppendix A - C for typical styles and measurements. 1.2 The contractor shall supply a system capable of supporting
SECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
CARBON STEEL BARS HOT ROLLED
CARBON STEEL BARS HOT ROLLED Grade Description...3-2 Rounds...3-3 thru 3-4 Strip...3-5 Flats (A-36)...3-6 thru 3-8 (M1044)...3-9 Squares...3-9 Reinforcing Bars...3-10 Reinforcing Mesh...3-10 TOLERANCES...3-11
Manufacturing & Distributing Customer Solutions
Manufacturing & Distributing Customer Solutions Wireless Site Accessories Grounding Materials Electrical Components Lightning Protection Custom Fabrication Hardware Tools Safety Equipment Contractor Supplies
Chapter 73. Articles of iron or steel
Chapter 73 Articles of iron or steel Notes. 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
Accepts Castings: End Cap #28: Wall Mount #52: Accepts Castings: Fence & Railing 04. EMS NC (704) fax
Welded Railing 2-5/8 Hollow Cap x 25 10-129 28-63-210 wt/ft: 0.573 accepts 3/4 Picket with 2 Post; Mates w/#133 2-5/8 Solid Cap x 25 10-130 28-63-200 wt/ft: 0.530 accepts 3/4 Picket w/2 Post; Mates w/#133
STAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
Houston Community College 3200 Main Parking Garage November 15, 2010 Houston Community College
SECTION 323113 - CHAIN LINK FENCES AND GATES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Syntron Parts Feeder Bowls
Syntron vibratory parts feeders Syntron Parts Feeder Bowls Selecting the proper bowl for your specific parts feeding application is critical. Complete information concerning the part and the application
Tri Custom Manufacturing
Catalog 106 Tri Custom Manufacturing Balusters / Spindles Porch & Newel Posts Caps / Post Skirts Railing Brackets Post Mount Towers Gate Hardware Faux Rock Pillars Post Wraps Quality Products for the Fence,
DRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS1910-2 First Edition 2017-10-20 Metal Chairs for 0ffice Purposes Part. 2: Revolving and Tilting- Specification Reference number DUS 1910-2:2017 UNBS 2017 DUS 1910-2:2017 Compliance
SP Standard Profile. Flanged to Duct Install Type THERMAL BREAKS OPPOSED ACTION PARALLEL ACTION. T.A. Morrison & Co. Inc.
1 SUBMITTAL DATA Series 9000 BF Thermally Insulated Damper with Thermally Broken Frames & Blades SP Standard Profile Flanged to Duct Install Type THERMAL BREAKS OPPOSED frame is 4 (101.6 mm) deep x 1 (25.4
In-process Monitoring and Adaptive Control during Micro Welding with CW Fiber Laser
In-process Monitoring and Adaptive Control during Micro Welding with CW Fiber Laser Yousuke KAWAHITO*, Masaharu KAWASAKI* and Seiji KATAYAMA* * Osaka University, Joining and Welding Research Institute
Fig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Tri Custom Manufacturing
Catalog 108 Tri Custom Manufacturing Balusters / Spindles Porch & Newel Posts Caps / Post Skirts Railing Brackets Post Mount Towers Gate Hardware Faux Rock Pillars Post Wraps Quality Products for the Fence,
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.