Nederman Vacuum Hose Reel Series 881

Transcription

1 Nederman Vacuum Hose Reel Series 881 The vacuum hose reel facilitates the handling of long and heavy vacuum hoses and provides tidy and safe storage when hoses are not in use. Hoses are kept safely out of the way of forklifts and mobile workshop equipment. Separate suspension brackets make mounting the reel simple and safe. Weight incl. hose: kg (57-62 lbs.) Material recycling: 100 % Reel with hose Antistatic reel and vacuum hose. Supplied with automatic damper. Integrated micro-switch. Max. suction, kpa (psi) H< i.e dimension int. dia., mm (in.) Hose dimension length, m (ft.) Hose type (see end of chapter) 45 (7) 38 (11/2) 10(33) L (7) 50 (2) 10 (33) L * Connection hose = 1 m (3 ft.) long Reel without hose Max. suction, kpa (psi) For lose dimension int. dia., mm (in.) For hose dimension length, m (ft.) Hose connections on reel (see end of chapter) 45 (7) 38{1 1/ 2)/50 (2) 10(33) L Nederman 13

2 Nederman Cable Reel Series 782 A safe and functional 1-phase cable reel for low and extra low voltage power requirements Supplied complete with pivoting bracket. Also available in static and signal cable versions. Weight incl. cable: kg (8-11 lbs.) Material recycling: 100 % Degree of protection code IP 44 Tested and approved according to IEC Cable is easily replaced. Rubber covered power cable. Voltage, V Amperage, A Max. power, W Conductors, No. x area, mm 2 Distribution cable length, m (ft.) Distribution cable type Connection cable Provided with x (39) H05RN-F x1.5 12(39) H07RN-F - Earth wire For static electricity 3x1.5 12(39) A05RN-F - Earth clip, connection cable x1.5 12(39) H07RN-F - Thermal overload, protector, earth conductor x1.5 12(39) H07RN-F, Euro socket 1 m, Euro pli.g Thermal overload, protector, earth conductor Nederman Cable Reel Series 793 A heavy duty cable reel for use in industrial environments. Available in 1-phase and 3-phase versions and supplied with thermal overload protector. Accommodates power cable lengths up to 25 m (82 ft.). Components made of composite materials and galvanized steel. Weight incl. cable: g (31-35 lbs.) Material recycling: 100 % Degree of protection code IP 55 Tested and approved acco ding to IEC Rubber covered power cable Not Available in Canada Voltage, V Amperage, A Max. power, W Phase Conductors, No. x area, mm 2 Distribution cable length, m (ft.) Distribution cable type x2.5 18(59) H07RN-F x (82) H07RN-F x2.5 15(49) H07RN-F x (72) H07RN-F * Connection Cable = 1 m (3 ft.) long Accessories: see end of chapter... [\lgclgffflcin 1 4

3 Accessories for hose reels Description 1 Pivoting wall bracket for Series 876, 883, 8; 18, 889 and 893. Hole spacing and dimensions for wall mounting are the same as on the reel foot plate. 1 Galvanized Stainless steel Pivoting wall bracket for Series 884 and 88i:i. 2 Galvanized Stainless steel Stainless steel swivel for Series 884, BSP t read. 3 For hose 1.5 MPa (220 psi), 19 mm (% in.) For hose 10 MPa (1450 psi), 12.5 mm (Vz in. ) For hose 25 MPa (3625 psi), 10 mm (3/ 8 in Water gun in chromium plated brass. Blue, 'rovided with safe hand grip and insulated trigger. Connection = Vz in. Female BSP Water gun in stainless steel, quality 316. W he. Provided with safe hand grip and insulated trigger. Connection = Vz in. Female BSP Water gun for high temperature water. Stair less steel, quality 316. Red. Provided with safe and insulated hand grip and insulated trigger. Connection = Vz in. Female BSP 7 Water gun, EX-approved bytuv for use in lone 1,2 and 22. Stainless steel, quality 316. Black. Provided with safe and insulated hand grip and insulated trigger. Connection = Vz in. Female BSP Air gun with high blowing force and ergonoi lie design. Housing and trigger of POM / Acetal plastic. Airpipe in electro-plated steel. Connection = VA in. Female BSP Swivelling low pressure couplings -1.5 MPa (220 psi) Description Type Part no 1 Vz in. male BSP - 3/ 8 in. hose tail - Bras;:; Adapter / Hose tail Vz in. male BSP- Vz in. hose tail - Bras; Adapter / Hose tail Vz in. male BSP - % in. hose tail - Bras Adapter / Hose tail Vz\r\. male BSP- 3/s in. hose tail - Stair ess steel Adapter / Hose tail Vz in. male BSP - Vz in. hose tail - Stair ess steel Adapter / Hose tail Vz in. male BSP-% in. hose tail - Stair less steel Adapter / Hose tail Vz in. male BSP - 3/ 8 in. male BSP - Br? ss Adapter / Adapter Vz in. male BSP - Vz in. male BSP - Brass Adapter / Adapter Vz in. male BSP - % in. male BSP - Bra ss Adapter / Adapter Vz in. male BSP - 3/ 8 in. male BSP - Ste nless steel Adapter / Adapter Vz in. male BSP - Vz in. male BSP - Sta iless steel Adapter / Adapter /2 in. male BSP-% in. male BSP - Stainless steel Adapter / Adapter Vz in. male BSP - 3/ 8 in. female BSP - E ass Adapter / Adapter Vz in. male BSP - Vz in. female BSP - B ass Adapter / Adapter Vz in. male BSP - % in. female BSP - Brass Adapter / Adapter Vz in. male BSP - 3/ 8 in. female BSP - ainless stee \ Adapter/Adapter Vz in. male BSP - Vz in. female BSP - S sinless stee I Adapter/Adapter Vbin. male BSP-% in. female BSP-Stainless steel Adapter/Adapter /2in. male BSP - % in. female BSP-Si ainless stee I - EX-approved Adapter/Adapter Swivelling high pressure coupling s - 25 MPa (3625 psi) Descrip- cn Type Part no 3/ 8in. mi lie BSF )_3/ 3 in. male BSP - Plated steel Adapter / Adapter / 8 in. male BSF >_3/ 3 in. male BSP - Stainless steel Adapter / Adapter Nederman 15

4 Hose specifications Hose A Specification C o v e r in P V C a n d i n n e r t u b e in P U R. Temperature Temperature H o s e f i t t i n g s in f r e e h o s e H o s e f i t t i n g s in I e e Hose connection Hose connection range, min., range, max., e n d, distribution hose h o s e e n d, inlet r 3se on reel, distribution o n r e e l, inlet h o s e M a l e / 4 in. BSP, b r a s s. N o inlet hossi W i t h spiral hose protector. included. C ( F) C ( F) -10 (+14) +60 (+140) Synthetic textile braid. B C o v e r in N B R / P V C a n d i n n e r t u b e in hose 1 - H o s e tail / s i n. + 3 clamp (-22) M a l e BSP, c h r o m e p l a t e d. - H o s e tail Vz i n (-22) (+212) M a l e BSP, c h r o m e p l a t e d (-4) cone, Female BSP 60 chrome plated. cone, chrome plated. cone cone cone, stain- Female BSP 60 less steel. c o n e, s t a i n l e s s si e e l. Female BSP 60 cone, F e m a l e B S P 60 chrome plated. With rub- cone, chrome plated. Female BSP 60 cone, F e m a l e B S P 60 stainless steel. With rub- cone, stainless s eel. Female BSP 60 cone, Female B S P 60 chrome plated. c o n e, c h r o m e plaited. Female BSP 60 cone, F e m a l e B S P 60 chrome plated. c o n e, c h r o m e plaited. N B R. S y n t h e t i c textile b r a i d. clamp. D C o v e r in N B R / P V C a n d i n n e r t u b e in E C o v e r in N B R / P V C a n d i n n e r t u b e N B R. S y n t h e t i c textile b r a i d. in f o o d g r a d e q u a l i t y N B R. S y n t h e t i c textile b r a i d. F C o v e r in N B R / P V C a n d i n n e r t u b e (-4) in f o o d g r a d e q u a l i t y N B R. S y n t h e t i c textile b r a i d. G C o v e r a n d i n n e r t u b e in s y n t h e t i c r u b (+311) ber. S i n g l e s t e e l b r a i d. ber h o s e grip. H C o v e r a n d i n n e r t u b e in s y n t h e t i c r u b (+311) ber. S i n g l e s t e e l b r a i d. ber h o s e grip. 1 C o v e r a n d i n n e r t u b e in S B R b a s e d rubber. Single steel braid. J C o v e r a n d i n n e r t u b e in s y n t h e t i c, oil K C o v e r a n d i n n e r t u b e in r u b b e r, s y n (-4) +80 (+176) +70 (+158) resistant rubber. Double steel braid N o inlet h o s e Included for 3 8 m m 6 3 m m dia. included. dia. and 5 0 m m dia. Female BSP 60 cone, Female B S P 60 stainless steel. cone, stainless s eel. Male NPT, c h r o m e plated. - F e m a l e NPT, c h r o m e F e m a l e NPT, c h r o m e Male NPT. M a l e NPT. plated. With rubber hose plated. M a l e NPT. Male NPT. M a l e NPT. Male NPT. - _ thetic textile braid (acc. to E N ). L Corrugated ethyl-vinyl-acetate (EVA). Electrically conductive. M C o v e r in C R a n d i n n e r t u b e in N B R (-22) +80 (+176) Synthetic textile braid. Electrically conductive. N C o v e r in N B R / P V C a n d i n n e r t u b e in (-22) +155 (+311) N B R. S y n t h e t i c textile b r a i d. 0 C o v e r a n d i n n e r t u b e in s y n t h e t i c r u b ber. S i n g l e s t e e l b r a i d. grip. P C o v e r a n d i n n e r t u b e in S B R b a s e d +100 (+311) F e m a l e NPT, c h r o m e F e m a l e NPT, c h r o m e plated. plated. F e m a l e NPT, c h r o m e F e m a l e NPT, c h r o m e plated. plated. rubber. Single steel braid. Q C o v e r a n d i n n e r t u b e in s y n t h e t i c, oil resistant rubber. Double steel braid NB! Thread dimensions of hose fittings and dimensions of hose tails are always the same as the hose dimension, unless otherwise stated. Product Nederman 1 6 availability may differ by country

5 Accessories for cable reels Description 1 Pivoting wall bracket for Series 793. Hole spacing and dimensions for all mounting are the same as on the reel foot plate Nederman Balancers Series 810 The Series 810 Balancer makes the tool weightless and minimizes the strain on the operator. The balancer comes in three different models and in nine weight classes, with a span from 0.5 kg to 10.9 kg (1 to 24 lbs.). Covering material: composite. Designed with safety-chain mounting point. Convenient snap-type tool clip. With clevis and pin shackle for quick and easy mounting. Type Lift power, kg (lbs.) Cord length, m (ft.) Cord material A (1-2) 1.6(5) Nylon cord A (2-4) 1.6(5) Nylon cord B (4-6) 2.0 (7) Steel wire B (6-8) 2.0 (7) Steel wire C (6-9) 2.0 (7) Steel wire C (9-13) 2.0 (7) Steel wire C (13-18) 2.0 (7) Steel wire C (18-24) 2.0 (7) Steel wire Nederman 17

6 Extraction arms - non-explosive environments Standard Teles opic Original NEXMD NEXHD Light applications. Extraction of fumes, vapors and dust. Schools, limited spaces, small booths. Medium applications. Extraction of fumes, vapors and dust. Small workshops, metal fabrication shops. Heavy applications. Extraction of heavy smoke, vapors and dust. Heavy engineering workshops, welding, laser cutting, grinding with spatter. X >< X )( X X X X Standard Telescopic Original NEXMD NEXHD Recommended airflows, m3/h (cfm) ( ) ( ) ( ) 9:i ( ) ( ) Maximum fume temperature, C ( F) 70(160) 70(160) 70(160) 70(160) 120 (250) Noise level at hood, db(a) Damper Optional Optional Standard Standard Standard Hose material PVC covered aluminum foil PVC covered polyester fabric PVC covered polyester fabric PVC covered polyester fabric Glass fiber reinforced PVC, PVC covered polyester fabric Connection dia., mm (in.) 160 (6V4) 150/160 (6/61/4) 150/160 (6/6 1A) 160 (61A) 200 (8) Note Built in wall bracket 360 swivel 360 swivel 360 swivel 360 swivel Ex-approved extraction arms The NEX range of extraction arms is specially designed for working environments with fumes, vapors or explosive dust and also where the hygienic demands are high and large airflows are required. Typical workplaces can be found in industrie: such as pharmaceutical, food processing and chemical. All arms are Ex-approved. NEX D NEX DX NEXS Marking: EX II 3 D Marking: EX II 2 D Marking: EX II 2 D/G II - Group II above ground, not mining II - Group II above ground, not mining I - Group II above ground, not mining 3 - Equipment category 3 working in zone Equipment category 2 working in zone quipment category 2 working in zone 1/21 D - To be used in environments with explosive dust D - To be used in environments with explosive dust D - To lie used in environments with explosive dust G -To oe used in environments with explosive gas NEX D NEX DX NEXS Recommended airflows, m3/h (cfm) ( ) ( ) ( ) dia. 125 mm (5 in.) ( ) dia. 160 mm (6 1A in.) Maximum fume temperature, C ( F) 70 (160) 70(160) 70 (160) Noise level at hood, db(a) Damper Optional Optional No Hose material PVC Antistatic Polyurethane Antistatic Polyurethane Connection dia., mm (in.) 160 (61/4) 160 (61A) 125 and 160 (5 and6 1/ 4) Note 360 swivel 360 swivel 180 swivel Nederman 18

7 Extraction Arm Telescopic The Nederman Telescopic Arm is specially designed for working environments with fumes, vapors or non-explosive dust, where space is limited. Ideal for use in welding schools or for production in small welding booths. Applications can be welding, grinding, or other industrial processes where a small, easily positioned arm is required. The reach of the arm is between 0.9 and 1.6 meters (3 and 5 feet). The arm is flexible in all directions and simple to position and extend The arm has a balanced telescopic action with adjustable tension The assembly is suspended by a swivel allowing it to rotate 360 degrees The hood can be tilted in all directions Pressure drop o i ' I \ i] Description Reach, m (ft.) Airflow, m3/h (cfm) Connection dia., mm (in.) Max. fume temperature, C (-F) Noise level at hood, db(a) Weight, kg (lb.) Telescopic arm with metal hood with damper Telescopic arm with metal hood no damper Telescopic arm with Original hood (3-5) ( ) 160 (61/4) 70 (160) (26) (3-5) ( ) 160 (61A) 70 (160) 76 12(26) (3-5) ( ) 160 (61/4) 70(160) 76 12(26) Accessories: see end of chapter Proper availability may differ by country NSCfGrfflcHl 1 9

8 Extraction Arm Standard Nederman Extraction Arm Standard is specially designed for working environments with fumes, vapors or n m-explosive dust, where the demands for higher airflows and temperatures are moderate. The applications can be welding, grinding, or other industrial processes where an easily positioned arm is reqi ired. The arm is available in two lengths, 2 and 3 meters (7 and 10 feet) and equipped with a high efficiency extraction hood. simple to position ided by an integrated wall in the bend as an accessory Pressure drop mm (inch) cfm A: 3 m (10ft.) B:2 m (7ft.) Reach, m (ft.) Airflow, m3/h (cfm) Connection dia., mm (in.) Max. fume temperature, C ( F) 'F) Noise levelv t hood, db(a) Weight, kg (lb) 2(7) ( ) 3(10) ( ) 160 (61/4) 70 (160) 1:7 11 (24) (61/4) 70(160) 67 13(29) Accessories: see end of chapter p r Q d u c t a v a i l a b i l i t y m a y d i f f e r b y c o u n t r y l\l@clgffflchl 2 0

9 Extraction Arm Original The Extraction Arm Original is specially designed for working environments with fumes, vapors or non-explosive dust. Typical applications are welding, grinding, or other industrial processes where an easily positioned arm is required. The arm is available in four types: A. 4mH (14 ft.h), horizontal, long reach, fits under low ceilings B. 4m V (14ft. V), vertical, long reach for extraction at both high and low levels C. 3m (10ft.) D. 2 m (7 ft.) Swivel allows the product to rotate 360 degrees The arm is flexible in all directions and simple to position The arm can be mounted in combination with different brackets, extension arms, on exhaust rails or on fixed or mobile filter equipment. The arm is equipped with a damper in the hood as standard The hood on all models can be tilted in all directions Pressure drop in. w.g.a A= 4 m (14ft.) horizontal, B=4m (14ft.) vertical, C 3 (10ft.) m, D=2m (7ft.) Description Reach, m (11.) Airflow, m3/h (cfm) Connection dia., mm (in.) Max. fume temperature, X ( F) Noise level at hood, db(a) Weight, kg (lb.) Original arm 2 m (7 ft.) 2(7) ( ) 150/160 (6/6V4) 70 (160) (24) Original arm 3 m (10 ft.) 3(10) ( ) 150/160 (6/6V4) 70(160) (29) Original arm 4 m (14 ft.) vertical 4(14) ( ) 150/160 (6/6'A) 70(160) (35) Original arm 4 m (14 ft.) horizontal 4(14) ( ) 150/160 (6/61/4) 70 (160) (35) Kit consists of Original Arm 2 m (7 ft.) + N16, 3 phase, 208/23C '460V fan + Wall bracket + Fan Manual Starter Original Arm 2 m (7 ft.) + N16, 1 phase, 120/230 / fan + Wall bracket + Fan Manual Starter Original Arm 3 m (10ft.).+ N24,1 phase, 120/2a()V fan + Wall bracket + Fan Manual Starter Original Arm 4 m (14 ft.) vertical + N24, 1 phase, 120/230V fan + Wall bracket + Fan Manual Starter Accessories: see end of chapter Nederman 21

10 Extraction Arm NEX MD Nederman NEX MD is an extraction Mim for medium to heavy duty applications. The arm has a 160 mm ((>% inch) diameter hose, which together with the external arm system provide high air flow with low pressure drop. Heavy-duty swivel - allows 360 rol ition Perfectly balanced and simple to position Encapsulated support mechanism protects the arm against dust and dirt Can be mounted on brackets, extension arms and exhaust rails The design of the hood ensures very high capture capacity and low noise level With a damper in the hood - saves energy when not in operation The hose is easy to remove for cleaning The hood can be tilted in all directions Pressure drop in. w.g.. m3/h mm (inch) A: 5 m (161/2ft), B:4m (14ft), C:3m (10ft), D:2m (7ft.) Description Reach, m (ft-) Airflow, m3/h (cfm) Connection dia., mm (in.) Max. fume temperature, C ( F) Noise evel at hood, des(a) Weight, kg (lb.) NEXMD 2 m (7 ft.) 2(7) ( ) 160 (6V4) 70 (160) (35) NEXMD 3 m (10 ft.) 3(10) ( ) 160 (61/4) 70(160) (44) NEXMD4m (14ft.) 4(14) ( ) 160 (6V4) 70(160) (60) NEXMD5m(16 1/ 2ft.) 5(16 1/s) ( ) 160 (6V4) 70 (160) (70) Accessories: see end of chapter,,.,.....,, K Nederman 22

11 Extraction Arm Ml EX HD The Nederman NEX HD extraction arm is the top of the range arm, capable of handling high airflows and extraction of media at temperatures up to 120 C (250 F). The arm is specially designed for working environments with very heavy smoke, vapors or non-explosive dust. Applications can be welding, laser or hand plasma cutting, metal spraying, grinding where lots of spatter is generated, or other industrial processes where a perfectly balanced and easily positioned arm is required. Heavy-duty swivel allows the arm to rotate 360 degrees Flexible in all directions, perfectly balanced and very simple to position Support mechanism of the arm is encapsulated, protecting against dirt Can be mounted in combination with different brackets, extension arms or on exhaust rails Equipped with a damper in the hood as standard The hose is mounted parallel to the support arm by straps, which makes the hose very easy to remove for cleaning Minimized pressure drop and a low noise level Pressure drop mm (inch) cfm A:5m(16Vzft), B: 4 m (14ft.), C:3m(10ft.), D:2,\i(7ft.) Description Reach, m (ft.) Airflow, m3/h (cfm) Connection dia., mm (in.) Max. fume temperature, X ( F) Noise level at hood, db(a) Weight, kg (lb.) NEXHD 2 m (7 ft.) 2(7) ( ) 200 (8) 120 (250) 66 17(37) NEXHD 3 m (10 ft.) 3(10) i;i ( ) 200 (8) 120 (250) (46) NEX HD 4m (14 ft.) 4(14) ( ) 200 (8) 120 (250) (62) NEXHD5m(16 1/2ft.) 5 (16'/2) i:i ( ) 200 (8) 120 (250) (73) Accessories: see end of chapter l\igdeftnah 2 3

12 Extension Arm The Nederman Extension Arm, 4.2 m or 6.0 m (14 ft. or 20 ft.), is designed to be used when extra reach is needed Combine it with fume or dust extraction arms, or exhaust extraction equipment for cars or trucks. Made of heavy-duty steel profiles. Suspended by a pivoting wall bracket and equipped with a joint in the middle, the extension arm is flexible in all directions. Other equipment such as welding machines and hose and cable reels can also be added to the Extension Arm. A universal bracket makes it possible to fit additional equipment directly onto the Extension Arm Recommended additional equipmen : Extraction Arm Original, NEX MD or NEX HD (each max. 4 m), Single or Twin Exhaust Extractor or Exhaust Hose Reel - see pictures to he left Note: The duct kit must be ordered separately Recommended airflows Recommended maximum negative pressure Connection diameter Maximum load on outer arm 4.2 m Maximum load on outer arm 6.0 m Recommended installation height from floor level m3/h ( cfm) 3000 Pa (12 in. w.g.) 200 mm (8 in.) 100 kg (220 lb.) 60 kg (130 lb.) m (9-1 Oft.) Pressure drop in. w.g.> k A= Extension Arm bent to its limit B= Extension Arm straight Description Recovery rate by weight, % Weight, kg (lb.) Part no Extension Arm 4.2 m (14ft.) - order duct kit separately (160) Extension Arm 6.0 m (20ft.) -order duct kit separately (205) Accessory Recovery rate by weight, % Weight, kg (lb.) Materials Part no Cable for light kit Suspension for Exhaust Hose Reel 100 2(4) Powder painted steel Duct kit consists of Max temp of extracted air, C ( F) Recovery rate by weight, % Weight, kg (lb.) Materials Part no Duct kit 4.2 m (14ft.) Fume 120 (250) 92 8(18) G Ivanized steel duct, PVC coated glass fiber hose Duct kit 4.2 m (14ft.) Exhaust 150 (300) 57 12(26) Galvanized steel duct, NR-B hose Duct kit 6.0 m (20ft.) Fume 120 (250) 95 13(29) G Ivanized steel duct, PVC coated glass fiber hose Duct kit 6.0 m (20ft.) Exhaust 150 (300) 71 17(37) Galvanized steel duct, NR-B hose Nederman 24