EDUCATION BACKGROUND

Transcription

1 SARIZAM BIN MAMAT ( sarizam@umk.edu.my / sarizam_a08@yahoo.com ) PERSONAL INFORMATION (i) Date of Birth : 19th December 1976 (iv) Gender : Man (ii) Place of Birth : Pasir Mas,Kelantan (v) Nationality : Malaysian (iii) Marital Status : Married (vi) Religion : Islam (vii) Address : Kg.Jenereh Tujuh, To Uban, Pasir Mas, Kelantan. (viii) Contact No : ( mobile ) EDUCATION BACKGROUND EDUCATION BACKGROUND (i) April 2010 ~ March 2012, Joining And Welding Research Institute, Osaka University, Japan Master Degree in Material And Manufacturing Science (Material Science and Engineering ), Research : Variant analysis of bainite phase transformation in the heat affected zone of Cr-Mo steel. (ii) October 2009 ~ March 2010, Joining And Welding Research Institute, Osaka University, Japan Research student, Research : Observation of solidification phenomena in steel during arc welding. (iii) April 1996 ~ March 2000, Tottori University, Japan Bachelor in Engineering in Mechanical Engineering, Graduation Thesis : Research in Martensitic Transformation behavior in Zirconium with additive of 2% Ittorium. (iv) May 1994 ~ March 1996, Malaya University, Kuala Lumpur for Special Course Preparatory to Japan Completed the course and passed the special university entrance examination by Monbukagakusho, Passed the Japanese Language Proficiency Test ( Level ), Passed the Japanese Language Proficiency Test ( Level ). (v) January 1992 ~ December 1993, Mara Junior Science College,Taiping, Perak 8 aggregates in Sijil Pelajaran Malaysia (1993), Passed for Intermediate Level in Sijil Perdagangan Malaysia Principle account (1993). (vi) January 1989 ~ December 1992, Sek.Men.Tengku Panglima Raja,Pasir Mas, Kelantan 5 aggregates in Sijil Rendah Pelajaran (1991).

2 (vii) January 1983 ~ December 1988, Sek.Keb.Kubang Chenok,Pasir Mas, Kelantan 4A 1C in UPSR (1993), Completion grade Grade 1. EMPLOYMENT HISTORY ( EXPERIENCE & TRAINING ) EMPLOYMENT HISTORY ( EXPERIENCE & TRAINING ) Working Experience (i) March 2013 ~ present, Faculty of Earth Science, University Malaysia Kelantan ( Position : Lecturer Grade DS45 ) Lecturer for Applied Science ( Material Technology ) programme ( responsible on subjects such as fundamental of material science, metallurgy, joining and welding technology, etc ) (ii) April 2012 ~ March 2013, Advanced Technology Center ( ADTEC ), Shah Alam, Selangor, Manpower Department ( Position : Vocational Training Officer Grade J44 ) Head of Training Quality Control Department ( responsible in preparing the MQA documentation for course accreditation, monitoring the implementation of MS-ISO 9001:2008 etc.) Welding instructor (responsible on subjects regarding to NDT, DT ( mechanical testing ), quality control, supervisory and welding process including SMAW,GTAW,GMAW etc. ) (iii) December 2004 ~ September 2009, Industrial Training Institute of Mersing, Manpower Department ( Position : Vocational Training Officer Grad J41 ) Head of Arc and Gas Welding Division, Department of Mechanical and Manufacturing, Welding instructor ( Quality Control, Welding Inspection, Heat Treatment and Engineering Design ), Member of Quality Management Team ( Mechanical Dept Representative) and Internal Auditor for MS-ISO 9001:2008. (iv) April 2000 ~ December 2004, Rohm Wako Electronics (Malaysia) Sdn. Bhd., Kota Bharu, Kelantan ( Position : Engineer ) Planning and monitoring the 2 nd Production (TCE,LSE, Visual Inspection, LTE, Packing) process in order to achieve daily production and rejection target, and ensuring the whole process always in line with the Rohm Production System (RPS), Planning the machine maintenance including Periodical Preventive Maintenance and Corrective Maintenance, and manpower optimizing during production, Revise/establish Standard Operation Procedures. Conference Attended Participant at International Seminar on Advanced Joining Technology 2012 conducted by Centre of Advanced Manufacturing and Material Processing on 6 th September 2012 at Malaya University.

3 Presenter at Autumn National Convention 2011 by Japan Welding Society on 7 th Sept ~ 9 th Sept 2011 at Imperial College, Ise Campus, Mie Pref, Japan ),( Research Theme : Variant analysis of bainite phase transformation ), Presenter at 72th Autumn Conference Research Presentation 2011 by The Japan Society of Heat Treatment on 1 st Dec ~ 2 nd Dec at Kyushu University, Japan ),( Research Theme : Variant analysis of bainite phase transformation ). Course Attended ( Related to Welding Technology ) CSWIP 3.1 Welding Inspector held at ADTEC Shah Alam associated with TWISEA,Sg.Buloh (6 th Oct ~ 11 th Oct 2012 ), Diploma in International Welding Engineer ( IWE ) held by Osaka University as Osaka University is an approved training body by International Institute of Welding (IIW),( April 2010 ~ December 2011 ), Diploma In Non-Destructive Testing held by JPK associated with TWISEA, Sg.Buloh ( 2nd Feb ~ 30th April 2009), Content : (i) CSWIP Level 2 for Penetrant Testing(Welds), (ii) CSWIP Level 2 for Magnetic Testing(Welds), (iii) CSWIP Level 2 for Radiographic Interpretation, (iv) CSWIP Level 2 for Ultrasonic Testing (Welds 3.1 and 3.2 ). Understanding WPS and PQR held at SIRIM Pahang Branch ( 28th July ~ 30th July 2008 ), CSWIP 3.0 Visual Welding Inspector held at ILP Mersing associated with TWI Johor Bahru ( 16th November ~ 19th November 2007 ), Basic AutoCAD 2D & 3D held at ILP Mersing (27th September ~ 29th September 2006), ILJTM In House Training(GMAW Process) held at ILP Labuan (1st August ~ 30 th August 2006 ), ILJTM In House Training ( Welding Technology-SMAW Process ) held at ADTEC Batu Pahat (1st August ~ 30th September 2005), Basic GMAW Process held at ADTEC Batu Pahat (18th April ~ 29th April 2005), Basic Gas Welding, cutting and brazing, basic GTAW Process held at ADTEC Batu Pahat (14th February ~ 4th March 2005). Course Attended ( Related to Teaching & Coaching ) Level 3 Supervisory Skill Course held at ILP Mersing by CIAST(20 th ~ 31 October 2008), TM-001 Teaching Method Course (Pedagogy) held at CIAST, Shah Alam (7th January ~ 11st April 2008), Train The Trainer held at Hotel Sri Malaysia, Mersing by Ministry Of Human Resource associated with Infor Resource System Sdn.Bhd.(30th June ~ 4th July 2008), Efficient Coaching Course held at Ismah Beach Resort by Ministry Of Human Resource(1st August ~ 4th August 2006),

4 Kursus Induksi Pentauliahan Persijilan Kemahiran Malaysia held at CIAST,Shah Alam by MLVK(9th July ~ 10th July 2005). AWARDS 2008 Anugerah Pekerja Cemerlang, Ministry of Human Resource, 2008 Anugerah Tokoh Kualiti, ILP Mersing. COMPETENCIES & INTERESTS Language Ability English Band 6.5 in IELTS and 82 score in IBT-TOEFL, Japanese Level 2 in Japanese Language Proficiency Testing. Computer Skills Microsoft Office ( Word, Excel, Power point, Excess ), AutoCAD 2D,3D, Welding Skills SMAW Process SKM Level 1, Basic GMAW (T-fillet joint from 1F ~ 3F position, butt joint from 1G ~ 3G position), Basic GTAW (T-fillet joint for 1F,2F position, butt joint from 1G, 2G position), Basic Gas Welding and Brazing, Qualified Welding Inspector ( CSWIP 3.1 ), NDT Personal (Qualified in 2 methods of NDT CSWIP Level 2 in PT and RI ), Qualified International Welding Engineer, IWE by IIW ( Japan ). Professional Membership Member of BEM since 2006 (reg.no : 49644), Member of Japan Welding Society (JWS) since 2010 ( membership no : ), Member of The Japan Society of Heat Treatment since 2011(membership no:258).

5 REFERENCE First Personnel 1. Name : Professor Dr. Yuichi Komizo, 2. Current Position : Professor, Osaka University, 3. Address : Joining and Welding Research Institute, Osaka University,11-1 Mihogaoka, Ibaraki shi, Osaka,Japan Second Personnel 1. Name : Tuan Haji Jamil Bin Yahya, 2. Current Position : Deputy Director, Center for Instructor and Advanced Skill Training (CIAST) former Director of ILP Mersing, 3. Address : Pusat Latihan Pengajar dan Kemahiran Lanjutan (CIAST), Peti surat 7012, Jalan Petani 19/1, Seksyen 19, Shah Alam, Selangor.