FLOW DATA VALVE SEAT RATINGS
|
|
|
- Clifton Bridges
- 5 years ago
- Views:
Transcription
1 TYPE 530SB, 730SB, & 9300B DIGESTER BLOW VALVES These valves are specifically designed for digester blow service, providing the inherent advantages of ball valves for this critical pulp-mill application. Special features give these valves the capability to withstand characteristic extremes in pressure and temperature, passage of corrosive and abrasive media, thermal shock, and flashing. The highest degree of versatility to meet varying digester conditions is provided by the availability of metalwrapped filled-ptfe seats for operations requiring shutoff capability of polymeric seats.the balls are tunnelbored with rugged trunnion bearings to provide maximum flow and shock resistance for improved and long-lasting operation Type 730SB and Type 530SB valves are standard-port configurations.these valves conform to ASME/ANSI Class 300 specifications, except for length, which corresponds to Class 150 specifications.type 730SB valves are currently available in the 8" and 10" (DN 00 and 50) sizes.type 530SB valves are currently available in 1" (DN 300) sizes. Type 9300B valves are full-port designs and conform to ASME/ANSI Class 300 long-pattern specifications. Type 9300B valves are currently available in sizes 6", 8", and 10" (DN 150, 00, and 50). VALVE SEAT RATINGS Seat pressure and temperature limits are shown by the shaded area in the graph below. Seat working limits are based on differential pressure with the valve ball in the fully closed position and refer to seats only. The dotted line indicates the maximum valve body pressure and temperature rating for 316 and 317 stainless steel. Maximum Differential Pressure psi Temperature C Seat Pressure and temperature limits for metal-wrapped filed PTFE Class 300 stainless-steel body rating Temperature F Maximum Differential Pressure bar FLOW DATA The table below provides flow coefficients for Type 730SB, Type 530SB, and Type 9300B valves covered in this bulletin. The Cv values represent the number of gallons per minute of +60 F water that flows through the valve at a pressure drop of 1 psi.the metric equivalent, Kv, is the flow of water at 16 C through the valve in M 3 /hr at a pressure drop of 1 kg/cm. To convert Cv to Kv, multiply by VALVE BODY RATINGS Cv Values Valve Type Type Type inches DN 730SB 530SB 9300B These are maximum working pressure ratings of the valve body only.the seat ratings determine the practical pressure limitations according to actual service conditions. Test pressures are for hydrostatic test with ball half open. Body Ratings for 316 stainless steel* Temperature Pressure Temperature Pressure F psi C bar -0 to to Test Pressure 1100 Test Pressure 75 * Corresponds to ratings of ASME B for material grades shown in bill of materials on page. B130-1/009
2 METSO B130- Use these torque tables as a guide for selecting actuators for the digester blow valves described in this bulletin at differential pressures normally encountered in digester blow service. For torque values and actuator selection at higher differential pressures than those indicated, contact the home office. BILL OF MATERIAL AND PARTS LIST Part No. Part Name Material 316 Stainless Steel 317 Stainless Steel 1 Body 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M Body Cap 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 3 Ball 316 Stainless steel 317 Stainless steel 4 Stem 316 Stainless steel 317 Stainless steel 5 Seat Metal-wrapped filled PTFE Metal-wrapped filled PTFE 6 Body Seal PTFE / 316 Stainless steel PTFE / Alloy 0 7 Secondary Stem Seal Graphite Graphite 8 Stem Bearing Filled PTFE Filled PTFE 15 Stem Nut Carbon steel Carbon steel 1 Compression Ring Stainless steel Stainless steel Identification Tag Stainless steel Stainless steel 3 Drive Screw Stainless steel Stainless steel 5 Stem Retainer Seal Graphite Graphite 6 Trunnion Plate 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 7 Trunnion Bearing Nitronic 60 Nitronic 60 8 Bearing Spacer Filled PTFE Filled PTFE 9 Hex Head Cap Screw ASTM A193 Grade B8,B8Cor B8T Class ASTM A193 Grade B8,B8Cor B8T Class 30 Stem Retainer 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 3 Upper Stem Seal PTFE PTFE 33 Key Carbon steel Carbon steel 34 Socket Head Cap Screw ASTM A193 Grade B8,B8Cor B8T Class ASTM A193 Grade B8,B8Cor B8T Class 37 Caution Tag Stainless steel Stainless steel 40 Trunnion I.D. Tag Stainless steel Stainless steel 41 Roll Pin Stainless steel Stainless steel VALVE TORQUE DATA Torque output values and actuator selection tables for the different types of Metso actuators are contained in the following bulletin: Pneumatic/Hydraulic B-Series Piston Actuators 6B0 Note: These valves are not intended for manual handle operation and therefore do not have travel stops. Valve Operating Torque in lb-ft at Specified Differential Pressures in psi Valve inches Type 730SB Type 530SB Type 9300B Δp = 100 psi Δp = 150 psi Δp = 100 psi Δp = 150 psi Δp = 100 psi Δp = 150 psi Valve Operating Torque in Nm at Specified Differential Pressures in bar Valve DN Type 730SB Type 530SB Type 9300B Δp = 6.9 bar Δp = 10.3bar Δp = 6.9 bar Δp = 10.3 bar Δp = 6.9 bar Δp = 10.3 bar TECHNICAL BULLETIN 1/09
3 B130- TYPE 530SB, 730SB, AND 9300B DIGESTER BLOW VALVES DIMENSIONS Type 530SB - 1" (DN 300) U & 3 V 3, 37, W Hole S F H 77 G K C Dia. E Port Dia T B H = Bolt Circle L = of Holes M= Number of Holes A Valve Approximate Dimensions inches Approx inches A B C D E F G H K L M S T U V W lb * 16 3 dia / Valve Approximate Dimensions mm Approx DN A B C D E F G H K L M S T U V W kg * dia / * 1-1/8" (9mm) 8 x 1-11/16" (43mm) deep tapped holes in flange on body cap end ** Screw thread dimensions are in inches. TECHNICAL BULLETIN 1/09 3
4 METSO B130- DIMENSIONS (continued) Type 730SB 8" & 10" (DN 00 & 50) U V W 8 S R 5 G K C Dia. E Port Dia. 1 T Typ A B D = Bolt Circle L = of Holes M= Number of Holes Valve Approximate Dimensions inches Approx inches A B C D E G K L M P R S T U V W lb * ** Valve Approximate Dimensions mm Approx DN A B C D E G K L M P R S T U V W kg * ** * 7/8" (mm) 9 x 1-1/4" (3mm) deep tapped holes in flange on body cap end. ** 1" (5mm) 8 x 1-3/8" (35mm) deep tapped holes in flange on body cap end. Screw thread dimensions are in inches. 4 TECHNICAL BULLETIN 1/09
5 B130- TYPE 530SB, 730SB, AND 9300B DIGESTER BLOW VALVES BILL OF MATERIAL AND PARTS LIST 8" & 10" (DN 00 & 50) 730SB Part No. Part Name Material 316 Stainless Steel 317 Stainless Steel 1 Body 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M Body Cap 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 3 Ball 316 Stainless steel 317 Stainless steel 5 Stem 316 Stainless steel 317 Stainless steel 7 Seat Metal-wrapped filled PTFE Metal-wrapped filled PTFE 8 Stem Retainer 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 9 Compression Ring Stainless steel Stainless steel 10 Compression Plate Stainless steel Stainless steel 1 Socket Head Cap Screw ASTM A-193 Grade B8,B8C,or B8TClass ASTM A-193 Grade B8,B8C,or B8TClass 13 Hex Head Cap Screw ASTM A-193 Grade B8,B8C,or B8TClass ASTM A-193 Grade B8,B8C,or B8TClass 14 Bonnet Stud ASTM A-193 Grade B8,B8C,or B8TClass ASTM A-193 Grade B8,B8C,or B8TClass 18 Bonnet Stud Nut ASTM A-194 Gr 8,8C,8M,8T,8F ASTM A-194 Gr 8,8C,8M,8T,8F 19 Identification Tag Stainless steel Stainless steel 65 Body Seal PTFE / 316 Stainless Steel PTFE / Alloy 0 66 Stem Retainer Seal PTFE / 316 Stainless Steel PTFE / Alloy 0 69 Upper Stem Seal PTFE PTFE Stem Bearing Filled PTFE Filled PTFE 71 Secondary Stem Seal Graphite Graphite 89 Trunnion 316 stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 91 Bearing Spacer Filled PTFE Filled PTFE 9 Trunnion Bearing Nitronic 60 Nitronic 60 BILL OF MATERIAL AND PARTS LIST 6", 8", & 10" (DN 150, 00, & 50) 9300B Part No. Part Name Material 316 Stainless Steel 317 Stainless Steel 1 Body 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M Body Cap 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 3 Ball 316 Stainless steel 317 Stainless steel 5 Stem 316 Stainless steel 317 Stainless steel 7 Seat Metal-wrapped filled PTFE Metal-wrapped filled PTFE 8 Stem Retainer 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 9 Compression Ring (6" & 8" [15-03 mm] only) Stainless steel Stainless steel 10 Compression Plate Stainless steel Stainless steel 1 Socket Head Cap Screw ASTM A-193 Grade B8,B8C,or B85Class ASTM A-193 Grade B8,B8C,or B85Class 13 Hex Head Cap Screw ASTM A-193 Grade B8,B8C,or B85Class ASTM A-193 Grade B8,B8C,or B85Class 14 Bonnet Stud ASTM A-193 Grade B8,B8C,or B85Class ASTM A-193 Grade B8,B8C,or B85Class 15 Lockwasher (10" [54 mm] only) Stainless steel Stainless steel 16 Body Stud Nut ASTM A-194 Gr 8,8C,8M,8T,8F ASTM A-194 Gr 8,8C,8M,8T,8F 18 Bonnet Stud Nut ASTM A-194 Gr 8,8C,8M,8T,8F ASTM A-194 Gr 8,8C,8M,8T,8F 19 Identification Tag Stainless steel Stainless steel 36 Grounding Spring Stainless steel Stainless steel 65 Body Seal PTFE / 316 Stainless steel PTFE / Alloy 0 66 Stem Retainer Seal PTFE / 316 Stainless steel PTFE / 316 Stainless steel 69 Upper Stem Seal PTFE PTFE Stem Bearing Filled PTFE Filled PTFE 71 Secondary Stem Seal Graphite Graphite 89 Trunnion Plate 316 Stainless steel ASTM A351 Type CF8M 317 Stainless steel ASTM A351 Type CG8M 91 Bearing Spacer Filled PTFE Filled PTFE 9 Trunnion Bearing Nitronic 60 Nitronic Key (10" [54 mm] only) Carbon steel Carbon steel TECHNICAL BULLETIN 1/09 5
6 METSO B130- DIMENSIONS (continued) Type 9300B - 6 & 8" (DN 150 & 00) U V 8 71 W S R 65 G K C Dia. E Port Dia. T Typ A B D = Bolt Circle L = of Holes M= Number of Holes Valve Approximate Dimensions inches Approx inches A B C D E G K L M P R S T U V W lb " 8 (5 mm) 310 1" 8 (5 mm) 560 Valve Approximate Dimensions mm Approx DN A B C D E G K L M P R S T U V W kg " 8 (5 mm) " 8 (5 mm) 55 6 TECHNICAL BULLETIN 1/09
7 B130- TYPE 530SB, 730SB, AND 9300B DIGESTER BLOW VALVES DIMENSIONS (continued) Type 9300B - 10" (DN 50) X U V W 8 S F 5 69 N R G K C Dia. E Port Dia. 1 T A B D = Bolt Circle L = of Holes M= Number of Holes Valve Approximate Dimensions inches Approx inches A B C D E F G K L M N P R S T U V W lb /4" (3 mm) Valve Approximate Dimensions mm Approx DN A B C D E F G K L M N P R S T U V W kg /4" (3 mm) TECHNICAL BULLETIN 1/09 7
8 HOW TO ORDER TYPE 530SB, 730SB, AND 9300B DIGESTER BLOW VALVES " 730S B WTT 1 inches DN See page 1 for specific availablility. Series inches DN Body Style Standard-port, 730S 8, 10 00, 50 ASME/ANSI Class 300, Class 150 face-to-face Full-port, ASME/ANSI , 8, , 00, Class 300, 50 long-pattern face-to-face Standard-port, 530S ASME/ANSI Class 300, Class 150 face-to-face 3 Special Service B Digester Blow Valve 4 Valve Type 7 Trunnion 5 End Connection 1 Standard Raised Face 6 Body Materials Stainless Steel Stainless Steel 7 Ball/Stem Material 00 Same as body 8 Seat & Seal Code WTT Metal-wrapped Filled PTFE (730S and 9300) WN Metal-wrapped Filled PTFE (530S only) 9 Body Fasteners ASTM A193 Gr. B8,B8C,or B8T ASTM A-194 Gr 8,8C,8M,8T,8F Subject to change without prior notice. Metso Automation Inc. Europe, Levytie 6, P.O. Box 310, Helsinki, Finland. Tel Fax North America, 44 Bowditch Drive, P.O. Box 8044, Shrewsbury, MA 01545, USA. Tel Fax Europe, 6-8 rue du Maine, 6871 Wittenheim Cedex, France. Tel. +33 (0) Fax +33 (0) South America, Av. Independéncia, 500- Iporanga, , Sorocaba-São Paulo Brazil. Tel Fax /49 Asia Pacific, 38A Thomson Road, #5-09 Novena Square Tower A, Singapore. Tel Fax China, 19/F, the Exchange Beijing, No. 118, Jianguo Lu Yi, Chaoyang Dist, 1000 Beijing, China. Tel Fax Middle East, Roundabout 8, Unit AB-07, P.O. Box 17175, Jebel Ali Freezone, Dubai, United Arab Emirates. Tel Fax
FLANGED RAILROAD BALL VALVES 7RRR, 7RRT & 7RRU STANDARD BORE: 1" 3" SERIES 7000 (AAR NO. E089012)
FLANGED RAILROAD BALL VALVES 7RRR, 7RRT & 7RRU STANDARD BORE: 1" 3" SERIES 7000 (AAR NO. E089012) The Jamesbury polymeric-seated flanged ball valves offer a patented flexible-lip seat design that provides
MAPAG butterfly valves Range of Products. Expect results
MAPAG butterfly valves Range of Products Expect results 1 MAPAG works in Horgau, Germany An extensive list of references proves the reliability and economy of the complete range of MAPAG s products. Metso
1/2 2-1/2 (DN 15 65) STANDARD PORT AND 1/2 2 (DN 15 50) FULL PORT SERIES 4000 BALL VALVES Threaded End Socket Weld Butt Weld
1/ -1/ (DN 1 ) STANDARD PORT AND 1/ (DN 1 ) FULL PORT SERIES 000 BALL VALVES Threaded End Socket Weld Butt Weld The JAMESBURY Series 000 ball valves offer the three most desirable attributes of high-quality
Meeting even your most demanding requirements
CB027 MAPAG Mapag butterfly valves Range Product of offering Products Topic of the brochure Meeting even your most demanding requirements Metso s Mapag product line offers engineered valve solutions A
1/2" 2-1/2" (DN 15 65) STANDARD PORT AND 1/2" 2" (DN 15 50) FULL PORT SERIES 4000 BALL VALVES Threaded End Socket Weld Butt Weld
/" -/" (DN ) STANDARD PORT AND /" " (DN ) FULL PORT SERIES 000 BALL VALVES Threaded End Socket Weld Butt Weld The Jamesbury Series 000 ball valves offer the three most desirable attributes of high-quality
1/2" 2-1/2" (DN 15 65) STANDARD PORT AND 1/2" 2" (DN 15 50) FULL PORT SERIES 4000 BALL VALVES Threaded End Socket Weld Butt Weld
1/" -1/" (DN 1 ) STANDARD PORT AND 1/" " (DN 1 0) FULL PORT SERIES 000 BALL VALVES Threaded End Socket Weld Butt Weld The Jamesbury Series 000 ball valves offer the three most desirable attributes of high-quality
NELES TOP ENTRY, ROTARY CONTROL VALVE, SERIES TOP 5
NELES TOP ENTRY, ROTRY CONTROL VLVE, SERIES TOP 5 Metso's Neles T5 series top entry rotary ball valves are designed to meet the requirements of chemical, petro-chemical and refining industries with improved
PN 40 DN 25-40, PN 25 DN 50-80, PN 16 DN Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 5208, EN RATE D RATE A
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel 5, 501 series C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various media
SERIES 19 Segmented Ball Valves. Size Range: 1-12 Carbon Steel, Stainless Steel, Optional Special Alloys ASME Classes 150, 300 & 600
SERIES 19 Segmented Ball Valves Size Range: 1 - Carbon Steel, Stainless Steel, Optional Special Alloys ASME Classes 15, 3 & Flow-Tek Series 19 is a versatile Segmented Ball Valve designed for throttling
Complete flow control
Solutions for the power industry Complete flow control Competitive edge through life-cycle performance It s a challenge As a power producer today, you most likely face the most competitive business climate
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the control of are available
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves (figures 1 and 2) can be utilized for the
R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Description. Edition
WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various medium like liquids, pulps and
Specification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve
Putting You In Control Specification Data CM36005 09/10 36005 Series V-Max High Capacity V-Ported Control Ball Valve Dresser Masoneilan 36005 Series V-Max High Capacity V-Ported Control Ball Valve 2 Dresser
Baumann 16, 32, 54, and 70 Pneumatic Actuators
Baumann Pneumatic s Product Bulletin Baumann 16, 32,, and 70 Pneumatic s Baumann actuators are single acting, pneumatic actuators with spring-return action. They are compact, multi-spring actuators with
Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Name Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the control of pressure,
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH With over 40 years of experience with trunnionmounted ball valves, Metso has designed this ball valve to mount on two large, low-friction trunnion
13 Lock tab washer 304 SS 14 Lever and grip Stl-zinc plt-w/vinyl PRODUCT NUMBER
83R-240 SERIES Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1.5 & 2 Socket Weld, 800 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
Type 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
87A-100 SERIES. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
87A-100 SERIES Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
88L-240 Series. Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
88L-240 Series Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - Refer to page D-A MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 8. Stem Nut 300 Series Stainless
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME to 6 Sizes
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 2 to 6 Sizes SERIES Features ISO5211 top mounting for manual, air or electric actuators Unique wave line seat reduces torque and extends
Fisher A11 High-Performance Butterfly Valve, NPS 30-72
A11 Valve Product Bulletin Fisher A11 igh-performance Butterfly Valve, NPS 30-72 The Fisher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure
88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
MDV SERIES 3 WAY BALL VALVES
MDV SERIES 3 WAY BALL VALVES Diverting ball valves for industrial and process applications. Design Pressure Rating 150# to 1500# Available in Sizes ½ to 12 2500# Available in Sizes ½ to 4 Valve Size 1/2
87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
83R-200 Series FEATURES STANDARD MATERIAL LIST
83R-200 Series Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1-1/2 & 2 Socket Weld, 800 psig CWP, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
BULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
88A-900 Series. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 STANDARDS COMPLIANCE
88A-900 Series Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108
Fisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves
Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves This bulletin covers the DN 25 through 600 (NPS 1 through 24) V150, V200 and V300 Vee-Ball control valves. The Vee-Ball valve combines globe valve
OpTB TM Trunnion Ball Valve
INTRODUCTION The Optimux OpTB brings the legendary and well proven robustness and dependability of the trunnion ball design to process control applications, no longer limited to a full port option, but
VALVES & MEASUREMENT. NUTRON TT/TM/TL Forged Steel Trunnion Mounted Ball Valves NUTRON
NUTRON TT/TM/TL Forged Steel Trunnion Mounted Ball Valves NUTRON 2 NUTRON TABLE OF CONTENTS NUTRON tt/tm/tl Forged steel trunnion mounted ball Valves Introduction... 5 MODEL TT Specifications and Compliances...
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88L-F40 SERIES Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERA APPICATION Clean fluids, dirty
Bettis CBB/CBA300-Series Pneumatic Valve Actuator Component Material List. Material List ML.CBx Rev. 0 October 2017
Bettis CBB/CBA300-Series Pneumatic Valve Actuator Component ML.CBx.01.01 Rev. 0 October 2017 ML.CBx.01.01 Rev. 0 Table of Contents October 2017 Table of Contents Section 1: Major Component 1.1 Typical
SV SERIES 2-PIECE V PORT CONTROL VALVES
SV SERIES 2-PIECE V PORT CONTROL VALVES Split Body metal seated control valves for industrial and process applications. Design Pressure Rating 150# Available in Sizes ½ to 12 300# Available in Sizes ½
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
FLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
YARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
Fisher NotchFlo DST Control Valve
NotchFlo DST Valve Product Bulletin Fisher NotchFlo DST Control Valve Fisher NotchFlo DST control valves offer excellent control of liquid services with high pressure drops and entrained particulate. The
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM A108 Type 1215 3 Ball ASTM A108 Type 1215 8 Stem Nut 300 Series Stainless Steel
KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
Worcester Controls Series 94, , and The High-Performance Solution for Fugitive Emission, Toxic Gas or High-Cycle Applications
FCD WCABR023-00 (Part PB 94-3) Mass Emission Qualified by Independent Laboratory to EPA Testing Procedures (See Page 2) An ISO 900 Registered Company Series 94, 94-50, 94-300 and 94-600 The High-Performance
ORBIT Valves STANDARD FEATURES
ORBIT Valves STANDARD FEATURES Cameron s ORBIT valves are ideal for applications when zero leakage and frequent operation are demanded. They are used globally in gas processing plants using molecular sieve
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
FLANGED END BALL VALVE
Specification: - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material providing maximum
Eccentric style, round ported plug valves F580 - valve sizes DN F583 - valve sizes DN
Eccentric style, round ported plug valves F80 - valve sizes DN 80-0 F83 - valve sizes DN 10-600 Features The resilient plug provides tight shut-off without sealing lubricants. The plug valve utilizes a
Bettis G-Series Spring-Return Pneumatic Valve Actuator Component Material List. Material List ML.GP Rev. 0 October 2017
Bettis G-Series Spring-Return Pneumatic Valve Actuator Component Material List Material List ML.GP.01.01 Rev. 0 October 2017 Material List ML.GP.01.01 Rev. 0 Table of Contents October 2017 Table of Contents
Propane Dehydrogenation Reactor and product recovery section applications
APPLICATION REPORT Propane Dehydrogenation Reactor and product recovery section applications Process overview The propane dehydrogenation process, known as PDH, is used to supply polymer-grade propylene
KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
NPS ½ - 4 DN ASME Limited Class 1700, 3100, 4500 Severe Service Metal Seated Ball Valves
M4 NPS ½ - 4 DN 15-100 ASME Limited Class 1700, 3100, 4500 Severe Service Metal Seated Ball Valves M4 Redefining isolation through continuous innovations Severe-Tek is Flow-Tek s High Performance Severe
NEOTECHA NXR PFA LINED BALL VALVES
These PFA lined ball valves are used in a wide variety of applications in many industries FEATURES GENERAL APPLICATION The valves are ideally suited for corrosive applications, requiring reliable performance,
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.
Ultra-Seal Ball Valves Series 300
A range of two piece full bore, flanged, free floating (seat supported) ball valves, incorporating mounting dimensions to BS EN 15081, featuring soft, metal and carbon seated designs. Features Two piece
Bettis G-Series Spring-Return Pneumatic Valve Actuator Component Material List. Material List ML.GP Rev. 0 October 2017
Bettis G-Series Spring-Return Pneumatic Valve Actuator Component Material List Material List ML.GP.01.01 Rev. 0 October 2017 Material List ML.GP.01.01 Rev. 0 Table of Contents October 2017 Table of Contents
88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE THRU 2
CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5 THRU 2 STANDARD LIST 2 Retainer ASTM A108 Type 1215 9 Gland Plate 302 or 304 SS 10 Stem Nut 316 SS ASTM A108, Carbon Steel, Chrome Plated
Cryogenic Service Valves
Cryogenic Service Valves Superlok cryogenic valves are used in many industries in a broad range gas service such as oxygen, nitrogen, argon and more. The valves incorporate specialized materials that maintain
Table of Contents Model Numbering System Ratings/Connections General Data
Specification Data CH3000 5/97 Control Valves A Complete Line of Heavy Duty, Balanced, Cage Guided, Globe Valves with VRT Anti-Cavitation and Noise Control Lo-dB Trim Table of Contents Model Numbering
World Class Bellows Seal Valves
World Class Bellows Seal Valves Fugitive Emissions Sealing High Cycle Bellows In-Line Servicing High Flow Capacity Conval Bellows Seal Valves meet all of the rigorous requirements of MSS SP-117, ensuring
- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
Tel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates
Tel : +971 4 8858907, Fax : +971 4 8854316 PO Box No 88490, Dubai Investment Park 1 Dubai - United Arab Emirates E-mail : sales@metallicboltscom, Web : wwwmetallicboltscom About Metallic Bolts Metallic
Triple offset valve with metallic seat for High performance. Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN and ASME B16-34
Type series booklet 8613.1783/4--EN Triple offset valve with metallic seat for High performance Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN 12516 and ASME B16-34 Applications LNG process
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
Compact Trunnion Mounted Side Entry Ball Valves
Compact Trunnion Mounted Side Entry Ball Valves THAT SQUALITY The Best Guarantee of Safety Perar Ball Valves, One of the first... since 1962 Founded in 1962, Perar is one of the first Italian Manufacturers
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator used in commercial and industrial applications
Stop Valves. Bellows Sealed. DIN PN ASME Class Forged Steel Globe Valves Type WBY - L. Bellows Sealed. ASME Class
Bulletin B06-16 BONETTI Stop Valves Bellows Sealed DIN PN 16-25 - 40 ASME Class 150-300 BONT Forged Steel Globe Valves Type WBY - L Bellows Sealed ASME Class 800-1500 - 2500 BONT Forged Steel Gate Valves
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
Fisher Cavitrol III One, Two, and Three Stage Trims
Cavitrol III Trims D0096X0 Product Bulletin 80.:00 September 07 Fisher Cavitrol III One, Two, and Three Stage Trims Cavitrol III trims (figures,, and ) are used for cavitating liquid applications in various
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 1/8 This specification describes the minimum requirements for piping systems for the following service: Gland Water Design Condition Operating Conditions 50 PSIG @ 150 F 0 to 5 PSIG @ 35
This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.
SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions
brands you trust. Tufline Lined Ball Valves
brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA
G Series Trunnion Mounted Ball Valves Material Matrix
G Series Trunnion Mounted Ball Valves Material Matrix Size NPS 2, 3, 4, 6 FB Class 150, 300 2 Size NPS 2, 3, 4, 6 FB Class 150, 300 ITEM NO. PART NAME C1L MATERIAL COMBINATION OF VALVE C6L 2LL 26L 1 BODY
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88A-F00 SERIES Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANAR COMPLIANCE and STANAR FEATURES refer to page -3. STANAR MATERIAL LIST PART MATERIAL 1 Body ASTM A216-WCB 2 Retainer
KSE Certified for vapours, gases and liquids Corrosion-resistant PTFE/PFA TFM-PTFE bellows sealed Special design for chlorine plants
Richter Certified Chemical Safety Valves KSE Certified for vapours, gases and liquids Corrosion-resistant PTFE/PFA TFM-PTFE bellows sealed Special design for chlorine plants Safety in corrosive and high
ANTI-ABRASION CERAMIC BALL VALVE
Contact Information ADD: Anfeng Industry Zone, Oubei Town, Yongjia County, Wenzhou City, Zhejiang, China Tel: +86-577-57666870 Fax: +86-577-57679885 Cell: +86-158-6772-9999 Web: http://www.verspec.com
Series V5066. Three-way bellows sealed control valve. Features SPECIFICATION. A. Hock MSR- und Electronic Service GmbH. Valve Division Wörth am Main
A. Hock MSR- und Electronic Service GmbH Valve Division Series V5066 Three-way bellows sealed control valve SPECIFICATION Three-way valve for mixing (V5066B) and diverting (V5066A) application. The adjustment
DOUBLE OFFSET BUTTERFLY VALVES SERIES 2E 5
ABsOlute flow control DN 50 - DN 500 (2-20 ) - 100 C + 500 C // Oil & Gas // Power Generation // Petrochemical Industry DOUBLE OFFSET BUTTERFLY VALVES SERIES 2E 5 WWW.ABOVALVE.COM GENERAL INFORMATION -
Masoneilan * Series Control Valve
GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5
Fisher NotchFlo DST Control Valve
NotchFlo ST Valve Product Bulletin Fisher NotchFlo ST Control Valve Fisher NotchFlo ST control valves offer excellent control of liquid services with high pressure drops and entrained particulate. The
Type 56 Butterfly Valve
Standard Features (Sizes -/2" ") Standard model (-/2" ") has Body and Disc for better chemical resistance at temperatures higher than can be achieved with. " has body and disc as standard. Our 3/3 stainless
BSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without