JCB Service: Adhesives, Sealants and Threadlockers

Size: px

Start display at page:

Download "JCB Service: Adhesives, Sealants and Threadlockers"

Lily Payne
5 years ago
Views:

1 JCB Service: Adhesives, Sealants and Threadlockers

It forms a strong bond to a wide variety of materials.

2 JCB BONDING & REPAIR JCB SUPERBONDER Adhesive is an ideal way to quickly and effectively bond and repair parts. It only takes seconds to cure to handling strength - and does not require any sort of mixing. It forms a strong bond to a wide variety of materials. JCB Superbonder Instant Adhesive Shear Strength (steel) Handling Time MPa 5-10 seconds (rubber) seconds (phenolic) seconds (metal) 4103/ x(5x5g) 4103/0956 1x50g Suitable for bonding: Metal Rubbers Plastic Composites Wood Leather + many more materials

JCB THREAD LOCKERS nprevents vibration loosening nstops rust and corrosion - makes maintenance easier nlubricates threads - making assembly much easier nreduces risk of cross-threading during

leaks Medium strength threadlocker - can be dismantled. Medium - high strength threadlocker. High strength permanant threadlocker.

s Thixotropic Breakaway / Prevail Torque (N m) 12/7 13/20 30/50 Maximum Temperature ( C) 4101/0250 1x10ml 4101/0251 1x50ml 4101/0552 1x200ml 4102/0551 1x50ml Packaging / Order Code Clean parts with

3 JCB THREAD LOCKERS nprevents vibration loosening nstops rust and corrosion - makes maintenance easier nlubricates threads - making assembly much easier nreduces risk of cross-threading during assembly ncan be used on a variety of fastener sizes nhigh-strength threadlockers help prevent theft / vandalism nquick and easy to apply nnuts and bolts can be re-used nseals threads - prevents leaks Medium strength threadlocker - can be dismantled. Medium - high strength threadlocker. High strength permanant threadlocker. M20 ¾ M20 ¾ M80 3 Maximum Fastener Size Handling Time / full strength* 500 mpa.s 500 mpa.s Thixotropic Breakaway / Prevail Torque (N m) 12/7 13/20 30/50 Maximum Temperature ( C) 4101/0250 1x10ml 4101/0251 1x50ml 4101/0552 1x200ml 4102/0551 1x50ml Packaging / Order Code Clean parts with JCB Cleaner A before applying threadlocker. JCB THREADSEALANT FOR PIPES nlubricates threads - making assembly much easier nreduces risk of cross-threading during assembly nstops rust and corrosion - makes maintenance easier nwill not creep, shrink or shred - will not block valves ntaps and valves can be easily aligned in pipework system nuse instead of PTFE tape or pipe dope npipe joints can be re-used nquick and easy to apply ncan be used on a variety of pipe sizes nideal for hydraulic and pneumatic seals Maximum Pipe Diameter Pressure Sealing Strength Handling Time / Full Strength* JCB Threadsealer M56 2 Seals to burst rating of most pipework. High (N m) on steel 20/10 Maximum Temperature ( C) 4102/ x50ml 4102/1951 1x50ml Clean parts with JCB Cleaner A before applying thread sealant..

JCB RETAINING COMPOUND JCB LIQUID MULTIGASKET Replace keyways, splines, expensive & time consuming fine machining for shrink or press fits Fit bearings into housings or mount bearings on shafts

to bond dissimilar metals, fast assembly Machining tolerances can be relaxed = lower cost No design change standard parts can be used Parts can be re-used and are undamaged Easy to apply Maximum Gap

s 33/58 Maximum Temperature ( C) Packaging / Order Code 4101/0651 1x50ml Clean parts with JCB Cleaner A before using retainer.

4 JCB RETAINING COMPOUND JCB LIQUID MULTIGASKET Replace keyways, splines, expensive & time consuming fine machining for shrink or press fits Fit bearings into housings or mount bearings on shafts Vibration proof will not loosen over time 100% metal to metal contact for better stress distribution Protects against metal fretting & corrosion Single part no mixing required, easy clean up Ability to bond dissimilar metals, fast assembly Machining tolerances can be relaxed = lower cost No design change standard parts can be used Parts can be re-used and are undamaged Easy to apply Maximum Gap Fill Handling Time / Full Strength* (N m) Low viscosity retaining compound. 0.12mm 400 mpa.s 33/58 Maximum Temperature ( C) Packaging / Order Code 4101/0651 1x50ml Clean parts with JCB Cleaner A before using retainer. Maximum Gap Fill Handling Time / Full Strength* (N m) on steel JCB Gasketmaker Thixotropic (non-drip) 0.5mm <30 mins / 24 hours 10/8 Maximum Temperature ( C) 4102/1212 1x50ml Clean parts with JCB Cleaner A before using Multigasket. Use instead of pre-cut gaskets One bottle for all gaskets = reduced inventory Vibration proof will not loosen over time No bedding in compression relaxation no servicing required Will not degrade - no loose particles to block valves 100% metal to metal contact, adhesive fills all voids and creates a much better seal Parts can be disassembled easily Will not creep or shrink Better stress distribution Easy to apply

5 SERVICE World Parts Centre, Beamhurst, Uttoxeter, Staffordshire ST14 5PA

HX Series Anaerobic Adhesives

HENGXIN CHEMICAL INDUSTRY CO LTD HX Series Anaerobic Adhesives Thread Locking Thread Sealing Retaining Compounds Manufacturer & Exporter ZHUHAI HENGXIN CHEMICAL INDUSTRY CO., LTD EVERGROWING IMP & EXP