PRODUCTS FOR THE PROFESSIONAL PRODUCT CATALOG ABRASIVES DIAMONDS EQUIPMENT SAWS ACCESSORIES. v.0805pc-02

Transcription

1 PRODUCTS FOR THE PROFESSIONAL PRODUCT CATALOG DIAMONDS EQUIPMENT SAWS ACCESSORIES v.0805pc-02

2 QUALITY IN PEARL HISTORY More than 50 years ago, Max Pearlman founded a small steel fabricating company. The company expanded and became a large user of abrasive products. With the demand for consistently high quality, cost effective abrasives on the rise, the Pearlman family recognized that the industry was ready for a customer driven abrasive distributor. Using this philosophy, Pearl has expanded from a small family enterprise into an international corporation selling coated and bonded abrasives, diamond superabrasives and equipment throughout North, Central and South America. In 1968, The Pearl Abrasive Company was founded as a wholly owned subsidiary of the family run Pearlman Corporation. PRODUCTS MARKETS SERVED STAFDA/FASTENERS/BUILDING & CONSTRUCTION SUPPLY RENTAL INDUSTRIAL TOOL STORES WELDING & ORNAMENTAL IRON TILE STONE FABRICATION MASONRY/BRICK/BLOCK PAINT & HARDWARE LUMBER & ROOFING IRON SUPPLY AUTOMOTIVE WOODWORKING SUPPLY FLOORING SUPPLY JANITORIAL PLUMBING MARINE PEARL PROFESSIONAL PRODUCTS In the 1970 s, Pearl set out to develop a complete line of innovative abrasive products. Our commitment to innovation allowed us to be the first to develop and introduce the Maxi Disc Radial Flap Disc and the reinforced Pearl Flex Wheel. PEARL COMMITMENT The Pearl Abrasive Company is committed to innovation, committed to service, and committed to quality. Only genuine Pearl Professional Products can provide the level of performance and the official "Pearl Seal of Quality" a true professional demands. In 1980, Pearl quickly established itself as an industry leader in the field of high-tech diamond blades. Pearl was the first company to introduce continuous rim dry cutting diamond blades. The patented waveshaped core, reinforced diamond matrix and Direct Sintering Technology (DST ) of the Pearl Super Dry Turbo Series set the industry standard for extraordinary performance and exceptional value. In 1993, the market was in need of a new product for surface and floor preparation. Pearl listened, invented and introduced the Hexpin Surface Preparation System, a compact, user friendly and cost effective floor preparation system utilizing diamond and carbide pins as well as a variety of florr preparation attachments. Whether the job requires grinding, sanding, polishing or coating removal on concrete, the professionals use the Hexpin System. In 1997, Pearl introduced the VX Series Tile Saws. A tile saw that was lightweight not light duty and made big cuts. We now have tile, rail and masonry saws. We continue to expand and improve this important division of the company.

3 TEGRITY TRUST SERVICES PROFESSIONAL CUSTOMER SERVICE FULLY-STOCKED NATIONAL WAREHOUSES COMPLETE PRODUCT LINE BUSINESS FRIENDLY POLICIES PRIVATE LABEL PROGRAMS INNOVATIVE PRODUCTS CO-OP ADVERTISING NATIONAL ADVERTISING PARTNER SUPPORT INNOVATIVE PACKAGING CONSISTENT QUALITY PEARL QUALITY Pearl quality is more than innovative design. Pearl quality is advanced engineering and rigid quality control. Pearl quality is a management team with hands on experience. LOOK TO PEARL FOR THE SOLUTION Professionals all across the country look to the Pearl Abrasive Company for a full line of technologically advanced abrasive and diamond products. Pearl Professional Products also include our Hexpin Surface Preparation equipment, saws and dust containment systems. We provide fast delivery and friendly service from strategically located and fully stocked warehouses throughout North America. TABLE OF CONTENTS GRINDING... 4 DEPRESSED CENTER WHEELS, CUP STONES, FLEXIBLE WHEELS, MAXIDISCS, WIRE BRUSHES, BENCH WHEELS CUTTING CUT-OFF WHEELS, THIN CUT-OFF WHEELS SURFACE PREP TURBO-CUT, STRIPPING DISCS, FLAP WHEELS, QUICKMOUNT, NON WOVEN DISCS SANDING FIBER DISCS, FIL-FREE DISCS, CLOTH BELTS, SHOP ROLLS, SANDPAPERS DIAMONDS WAVED-TURBO RIM BLADES TURBO RIM BLADES SEGMENTED BLADES SPECIALTY SPEED TILE & STONE BLADES SPECIALTY BLADES CUP WHEELS CORE BITS POLISHING PADS EQUIPMENT AND ACCESSORIES FLOOR PREPARATION HEXPIN PLATES, SUPERCLUTCH, ATTACHMENTS, BUFFER, FLOOR GRINDER DUST CONTAINMENT VACU-GUARD, SAW VAC, QUIKATTACH, BUF-VAC, WATERKIT POWER TOOL ACCESSORIES BLADE ROLLERS, SAW HANDLE UTILITY KITS PRO SAWS TILE SAWS, RAIL SAW, BRICK/MASONRY SAW MAKE IT A PEARL. TOOL ICONS TERMS AND CONDITIONS... 83

4 DEPRESSED CENTER GRINDING WHEELS DEPRESSED CENTER GRINDING WHEELS GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS SILVER LINE Ferrous Metals, Iron, Steel DC4010T 4 x 5/32 x 5/8 A24R 13, DC4003T 4 x 1/4 x 3/8 A24R 13, DC4030T 4 x 1/4 x 5/8 A24R 13, DC4510T 4-1/2 x 1/4 x 7/8 A24R 13, DC4510TH 4-1/2 x 1/4 x 5/8-11 A24R 13, DC5010T 5 x 1/4 x 7/8 A24R 12, DC5010TH 5 x 1/4 x 5/8-11 A24R 12, DC7020T 7 x 1/4 x 7/8 A24S 8, DC7020TH 7 x 1/4 x 5/8-11 A24S 8, DC9020T 9 x 1/4 x 7/8 A24S 6, DC9020TH 9 x 1/4 x 5/8-11 A24S 6, FOR PIPELINE DC4505T 4-1/2 x 1/8 x 7/8 A24R 13, DC4505TH 4-1/2 x 1/8 x 5/8-11 A24R 13, DC5005T 5 x 1/8 x 7/8 A24R 12, DC5005TH 5 x 1/8 x 5/8-11 A24R 12, DC701PT 7 x 1/8 x 7/8 A24S 8, DC701PTH 7 x 1/8 x 5/8-11 A24S 8, DC901PT 9 x 1/8 x 7/8 A24S 6, DC901PTH 9 x 1/8 x 5/8-11 A24S 6, MAKE IT A PEARL.

5 DEPRESSED CENTER GRINDING WHEELS Pearl s depressed center grinding wheels are especially well suited for grinding, weld dressing and deburring. Pearl depressed center wheels are engineered for aggressive stock removal and extra long life. All wheels are fully reinforced and meet or exceed US/Canada safety standards and specifications. DEPRESSED CENTER GRINDING WHEELS GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS PREMIUM REDLINE MAX A.O. NEW Ferrous Metals, Iron, Steel Ferrous Metals, Iron, Steel DC x 5/32 x 5/8 A24R 13, DC x 5/32 x 5/8 A36R 13, DC x 1/4 x 5/8 A24R 13, DC x 1/4 x 5/8 A36R 13, DC /2 x 1/4 x 7/8 A24R 13, DC4510H 4-1/2 x 1/4 x 5/8-11 A24R 13, DC x 1/4 x 7/8 A24R 12, DC5010H 5 x 1/4 x 5/8-11 A24R 12, DC x 1/4 x 7/8 A24S 8, DC7020H 7 x 1/4 x 5/8-11 A24S 8, DC x 1/4 x 7/8 A24S 6, DC9020H 9 x 1/4 x 5/8-11 A24S 6, FOR PIPELINE DC /2 x 1/8 x 7/8 A24R 13, DC4505H 4-1/2 x 1/8 x 5/8-11 A24R 13, DC x 1/8 x 7/8 A24R 12, DC5005H 5 x 1/8 x 5/8-11 A24R 12, DC701P 7 x 1/8 x 7/8 A24S 8, DC701PH 7 x 1/8 x 5/8-11 A24S 8, DC901P 9 x 1/8 x 7/8 A24S 6, DC901PH 9 x 1/8 x 5/8-11 A24S 6, T-28 DC704C 7 x 1/4 x 7/8 A24S 8, DC704CH 7 x 1/4 x 5/8-11 A24S 8, DC904C 9 x 1/4 x 7/8 A24S 6, DC904CH 9 x 1/4 x 5/8-11 A24S 6, DCRED40 4" x 1/4 x 5/8 A/WA24R 13, DCRED45 4-1/2" x 1/4 x 7/8 A/WA24R 13, DCRED45H 4-1/2" x 1/4 x 5/8-11 A/WA24R 13, DCRED50 5" x 1/4 x 7/8 A/WA24R 12, DCRED50H 5" x 1/4 x 5/8-11 A/WA24R 12, DCRED70 7" x 1/4 x 7/8 A/WA24S 8, DCRED70H 7" x 1/4 x 5/8-11 A/WA24S 8, DCRED90 9" x 1/4 x 7/8 A/WA24S 6, DCRED90H 9" x 1/4 x 5/8-11 A/WA24S 6, FOR PIPELINE DCRED45P 4-1/2" x 1/8 x 7/8 A/WA30S 13, DCRED45PH 4-1/2" x 1/8 x 5/8-11 A/WA30S 13, DCRED50P 5" x 1/8 x 7/8 A/WA30S 12, DCRED50PH 5" x 1/8 x 5/8-11 A/WA30S 12, DCRED70P 7" x 1/8 x 7/8 A/WA30S 8, DCRED70PH 7" x 1/8 x 5/8-11 A/WA30S 8, DCRED90P 9" x 1/8 x 7/8 A/WA30S 6, DCRED90PH 9" x 1/8 x 5/8-11 A/WA30S 6, REUSABLE ADAPTER FOR DEPRESSED CENTER WHEEL PART NO. SIZE HUBKIT 5/8-11 TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 5

6 Not All Aluminum Oxide Is Created EQUAL. PEARL MAX AO REDLINE MAX-AO DEPRESSED CENTER WHEEL 5 REASONS TO BUY PEARL S MAX A.O. GRAIN The combination of Pearl s unique MAX-AO grain and proprietary resin technology, results in a grinding wheel that significantly outperforms standard aluminum oxide wheels. This wheel is offered at a substantially lower price than highperformance engineered grains. MAX-AO SUPER GRAIN 1 Friability The ability to fracture under pressure so that as the cutting edges become dull, the grain breaks off and exposes sharp, new cutting edges. VIBRATION STANDARD AO COOLER GRINDING NON-LOADING INCREASED GRINDING EFFICIENCY REDLINE MAX-AO LOADING Hybrid grain mixture with unique crystalline properties enables individual grain particles to remain extremely sharp and durable. Excellent friability 1 characteristics that allow for optimally timed fracturing of abrasive crystals, constantly exposing sharp cutting edges. Significantly increased efficiency compared to traditional aluminum oxide wheels. The Redline s combination of a proprietary bonding system Max-AO grain creates a wheel with precise balance. This significantly reduces vibration and wheel chatter, improving grinding efficiency and speed. The Max-AO wheel dissipates heat better than standard aluminum oxide grinding wheels, resulting in increased performance, and less chance of marring the work piece. This makes the Pearl Redline ideal for applications in which burning the material can be a problem. Multiple cutting edges combined with an enhanced resin mixture result in stock removal rates significantly higher than standard wheels. The constant renewal of fresh cutting edges greatly decreases wheel loading, ensuring consistent performance. The Max-AO wheel has been designed with grinding efficiency in mind, providing greater productivity for the operator. Pearl s Redline will outperform standard AO wheels for about the same price! FINISH FASTER WITH PEARL! Use for Steel, Stainless Steel and Hard Materials. QUITE SIMPLY, THE REDLINE MAX-AO WHEEL OFFERS THE BEST SPARK-FOR-THE-BUCK ON THE MARKET TODAY! MAKE IT A PEARL.

7 DEPRESSED CENTER GRINDING WHEELS WHITE ALUMINUM OXIDE STAIN STEEL Other High Tensile Alloys SYNTHETIC RESINOID TECHNOLOGY STAIN STEEL Other High Tensile Alloys DC705S 7 x 1/4 x 7/8 WA24R 8, DC705SH 7 x 1/4 x 5/8-11 WA24R 8, DCSRT40 4 x 1/4 x 5/8 SRT24 13, DCSRT45 4-1/2 x 1/4 x 7/8 SRT24 13, DCSRT45H 4-1/2 x 1/4 x 5/8-11 SRT24 13, DCSRT50 5 x 1/4 x 7/8 SRT24 12, DCSRT50H 5 x 1/4 x 5/8-11 SRT24 12, DCSRT70 7 x 1/4 x 7/8 SRT24 8, DCSRT70H 7 x 1/4 x 5/8-11 SRT24 8, DCSRT90 9 x 1/4 x 7/8 SRT24 6, DCSRT90H 9 x 1/4 x 5/8-11 SRT24 6, GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS ZIRCONIA DC4030Z 4 x 1/4 x 5/8 Z24T 13, Ferrous Metals- Iron, Steel and Stainless Steel DC4510Z 4-1/2 x 1/4 x 7/8 Z24T 13, DC4510ZH 4-1/2 x 1/4 x 5/8-11 Z24T 13, DC5010Z 5 x 1/4 x 7/8 Z24T 12, DC5010ZH 5 x 1/4 x 5/8-11 Z24T 12, DC703Z 7 x 1/4 x 7/8 Z24T 8, DC703ZH 7 x 1/4 x 5/8-11 Z24T 8, DC903Z 9 x 1/4 x 7/8 Z24T 6, DC903ZH 9 x 1/4 x 5/8-11 Z24T 6, ALUMINUM GRINDING WHEEL DA x 1/4 x 5/8 AL24M 13, ALUMINUM Soft Non-Ferrous Metals, Copper, Brass, Bronze etc. DA /2 x 1/4 x 7/8 AL24M 13, DA4510H 4-1/2 x 1/4 x 5/8-11 AL24M 13, DA x 1/4 x 7/8 AL24M 12, DA5010H 5 x 1/4 x 5/8-11 AL24M 12, DA x 1/4 x 7/8 AL24M 8, DA7020H 7 x 1/4 x 5/8-11 AL24M 8, TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 7

8 DEPRESSED CENTER GRINDING WHEELS / CUP STONES SILICON CARBIDE SILVER LINE MASONRY Concrete, Stone, Cast Iron and Non-Ferrous Metals SILICON CARBIDE PREMIUM MASONRY Concrete, Stone, Cast Iron and Non-Ferrous Metals GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS DM4030T 4 x 1/4 x 5/8 C24S 13, DM4510T 4-1/2 x 1/4 x 7/8 C24S 13, DM4510TH 4-1/2 x 1/4 x 5/8-11 C24S 13, DM5010T 5 x 1/4 x 7/8 C24S 12, DM5010TH 5 x 1/4 x 5/8-11 C24S 12, DM7010T 7 x 1/4 x 7/8 C24S 8, DM7010TH 7 x 1/4 x 5/8-11 C24S 8, DM9010T 9 x 1/4 x 7/8 C24S 6, DM9010TH 9 x 1/4 x 5/8-11 C24S 6, DM x 1/4 x 5/8 C24S 13, DM /2 x 1/4 x 7/8 C24S 13, DM4510H 4-1/2 x 1/4 x 5/8-11 C24S 13, DM x 1/4 x 7/8 C24S 12, DM5010H 5 x 1/4 x 5/8-11 C24S 12, DM x 1/4 x 7/8 C24S 8, DM7010H 7 x 1/4 x 5/8-11 C24S 8, DM x 1/4 x 7/8 C24S 6, DM9010H 9 x 1/4 x 5/8-11 C24S 6, TYPE-11 CUP GRINDING STONES PEARL QUALITY, PROVEN PERFORMANCE AND PRICED RIGHT IMPROVED RESIN BONDING OF FOR LONGER LIFE 6" CUP WHEELS FEATURE BACKING MEETS OR EXCEEDS SAFETY REQUIREMENT Pearl Abrasive Co. s maximum value Type 11 Cup Stones were developed for both grinding performance and quality. Unlike competitor s inferior imports, Pearl s Cup Stones utilize the highest quality abrasive grain and resin bond to ensure that the stone will withstand the toughest grinding applications. T-11 CUP STONE SILICON CARBIDE Ferrous Metals, Iron, Steel CONCRETE Stone, Cast Iron and Non-Ferrous Fetals T-11 CSA416 4 x 2 x 5/8-11 A16Q 9, CSA516 5 x 2 x 5/8-11 A16Q 7, CSA616 6 x 2 x 5/8-11 A16Q 6, T-11 CSC416 4 x 2 x 5/8-11 C16Q 9, CSC516 5 x 2 x 5/8-11 C16Q 7, CSC616 6 x 2 x 5/8-11 C16Q 6, MAKE IT A PEARL.

9 It s Going to be a to the Where a Smooth Finish is Important. Pearl Abrasive Flexible Grinding Wheels provide the benefits of depressed center grinding wheels, resin fiber discs (sanding discs) and flap discs. + = FLEXIBILITY FIBER DISCS GRINDING WHEEL NON-WOVEN FABRIC GRAIN REINFORCED CLOTH GRAIN Flexible wheels are extremely versatile. If the application is grinding, polishing, shaping, finishing or sanding it can be accomplished with one wheel. Because of their flexibility, there is more wheel surface on the material being ground, making for a faster grind and longer lasting wheel. When a smooth finish is important and contours and corners have to be blended, flexible wheels get the job done. Using a flexible grinding wheel absorbs the vibration resulting in less fatigue and downtime. Pearl Abrasive Flexible Wheels are double reinforced with a top layer of non-woven fabric and an internal layer of reinforcing cloth. Pearl Flexible Grinding Wheels are manufactured using a variety of grains to do specific tasks on steel, stainless steel, other ferrous and non-ferrous metals as well as masonry, concrete and stone. When you want more and better grinding for your dollars! for Metal for Aluminum & Stone for Stainless Steel

10 FLEXIBLE GRINDING WHEELS FLEXIBLE GRINDING WHEELS GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS Ferrous Metals- Iron, steel and Stainless Steel FAC x 1/8 x 5/8 AC36 13, FAC x 1/8 x 5/8 AC46 13, FAC x 1/8 x 5/8 AC60 13, FAC x 1/8 x 5/8 AC80 13, FAC x 1/8 x 5/8 AC120 13, FAC /2 x 1/8 x 7/8 AC36 13, FAC4536H 4-1/2 x 1/8 x 5/8-11 AC36 13, FAC /2 x 1/8 x 7/8 AC46 13, FAC4546H 4-1/2 x 1/8 x 5/8-11 AC46 13, FAC /2 x 1/8 x 7/8 AC60 13, FAC4560H 4-1/2 x 1/8 x 5/8-11 AC60 13, FAC /2 x 1/8 x 7/8 AC80 13, FAC4580H 4-1/2 x 1/8 x 5/8-11 AC80 13, FAC x 1/8 x 7/8 AC24 8, FAC7024H 7 x 1/8 x 5/8-11 AC24 8, FAC x 1/8 x 7/8 AC36 8, FAC7036H 7 x 1/8 x 5/8-11 AC36 8, FAC x 1/8 x 7/8 AC46 8, FAC7046H 7 x 1/8 x 5/8-11 AC46 8, FAC x 1/8 x 7/8 AC60 8, FAC7060H 7 x 1/8 x 5/8-11 AC60 8, FAC x 1/8 x 7/8 AC80 8, FAC7080H 7 x 1/8 x 5/8-11 AC80 8, FAC x 1/8 x 7/8 AC120 8, FAC7120H 7 x 1/8 x 5/8-11 AC120 8, FAC x 1/8 x 7/8 AC36 6, FAC9036H 9 x 1/8 x 5/8-11 AC36 6, FAC x 1/8 x 7/8 AC46 6, FAC9046H 9 x 1/8 x 5/8-11 AC46 6, FAC x 1/8 x 7/8 AC60 6, FAC9060H 9 x 1/8 x 5/8-11 AC60 6, MAKE IT A PEARL.

11 FLEXIBLE GRINDING WHEELS The Pearl Flexible Grinding Wheel combines the advantages of depressed center wheels and resin fiber discs. Its design properties allow for flexibility when grinding, shaping, blending and finishing.the Pearl Flex Wheel is available in Aluminum Oxide, Silicon Carbide,White Aluminum Oxide and SRT grains. FLEXIBLE GRINDING WHEELS WHITE ALUMINUM OXIDE STAIN STEEL Other High Tensile Alloys SYNTHETIC RESINOID TECHNOLOGY STAIN STEEL Ferrous Metals- Iron, Steel and Other High Tensile Alloys GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS FWA x 1/8 x 7/8 WA24 8, FWA7024H 7 x 1/8 x 5/8-11 WA24 8, FWA x 1/8 x 7/8 WA36 8, FWA7036H 7 x 1/8 x 5/8-11 WA36 8, FWA x 1/8 x 7/8 WA46 8, FWA7046H 7 x 1/8 x 5/8-11 WA46 8, SILICON CARBIDE ALUMINUM & STONE Concrete, Stone, Cast Iron and Non-Ferrous Metals FCC x 1/8 x 7/8 CC36 8, FCC7036H 7 x 1/8 x 5/8-11 CC36 8, FCC x 1/8 x 7/8 CC46 8, FCC7046H 7 x 1/8 x 5/8-11 CC46 8, FLEX x 1/8 x 5/8 SRT 36 13,700 25/200 FLEX x 1/8 x 5/8 SRT 46 13,700 25/200 FLEX x 1/8 x 5/8 SRT 60 13,700 25/200 FLEX x 1/8 x 5/8 SRT 80 13,700 25/200 FLEX x 1/8 x 5/8 SRT ,700 25/200 FLEX /2 x 1/8 x 7/8 SRT 36 13,300 25/200 FLEX453H 4-1/2 x 1/8 x 5/8-11 SRT 36 13, FLEX /2 x 1/8 x 7/8 SRT 46 13,300 25/200 FLEX454H 4-1/2 x 1/8 x 5/8-11 SRT 46 13, FLEX /2 x 1/8 x 7/8 SRT 60 13,300 25/200 FLEX456H 4-1/2 x 1/8 x 5/8-11 SRT 60 13, FLEX /2 x 1/8 x 7/8 SRT 80 13,300 25/200 FLEX458H 4-1/2 x 1/8 x 5/8-11 SRT 80 13, FLEX /2 x 1/8 x 7/8 SRT ,300 25/200 FLEX451H 4-1/2 x 1/8 x 5/8-11 SRT , FLEX x 1/8 x 7/8 SRT 36 8, FLEX736H 7 x 1/8 x 5/8-11 SRT 36 8, FLEX x 1/8 x 7/8 SRT 46 8, FLEX746H 7 x 1/8 x 5/8-11 SRT 46 8, FLEX x 1/8 x 7/8 SRT 60 8, FLEX760H 7 x 1/8 x 5/8-11 SRT 60 8, FLEX x 1/8 x 7/8 SRT 80 8, FLEX780H 7 x 1/8 x 5/8-11 SRT 80 8, FLEX x 1/8 x 7/8 SRT 120 8, FLEX712H 7 x 1/8 x 5/8-11 SRT 120 8, PLASTIC BACKUP PADS FOR FLEX WHEELS AND PEARL NET PART NO. SIZE MAX RPM FPD40 4" 13,700 FPD50 4-1/2" 13,300 FPD70 7" 8,500 FPD90 9" 6,500 TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 11

12 RADIAL FLAP DISC the pearl maxidisc 1Pearl Abrasive offers an assortment of Maxidiscs for specific applications on a variety of materials. Stainless Steel Carbon Steel Sheet Metal Iron High Tensile Alloys Food and Dairy Equipment 2 APPLICATIONS ABRASIVE MATERIALS Pearl Abrasive uses only the best abrasive grains and backing material for our Maxidiscs. We only use 100% polyester or a combination of polyester/ cotton, NEVER PAPER. Pearl s unique way of embedding the grains to a durable polyester or polyester/cotton backing results in a construction that provides superior performance and life. CHOOSE YOUR APPLI- CATIONS CHOOSE THE GRAIN Choose the grain type specific to the job, meaning the material that is being worked on, in order to have the best outcome. Each abrasive grain has a specific fracturing characteristic making it useful for grinding operations on specific materials. As the disc comes in contact with the work piece the surface grains wear away exposing new sharper grains. This constant fracturing away produces the finished product. MATCH THE GRIT TO YOUR APPLICATION 3 DISC CONFIGU- RATIONS Pearl Abrasive offers a variety of flap configurations for specific applications. Variables to consider in overall flap configuration are: Flap Angle - For flexibility. Disc Shape - For aggressiveness. CHOOSE YOUR FLEXIBILITY CHOOSE YOUR SHAPE GENERAL USES

13 system When SELECTING THE RIGHT MAXIDISC IS EASY AS 1, 2, 3. APPLICATIONS ABRASIVE MATERIALS DISC CONFIGURATIONS choosing a Maxidisc there a number of things that you need to consider. The grain type for the job application, the backing material and shape used in the manufacture of the Maxidisc. Pearl Abrasive uses only top quality grains and backing materials. POLISHING GRINDING STOCK REMOVAL WELD BLENDING CLEANING FINISHING EDGE CHAMFERING BURR REMOVAL SANDING DEFLASHING PAINT REMOVAL ZIRCONIA SILICON CARBIDE ZIRCONIA FOR STAIN STEEL 100% Zirconia with active grinding agent. Manufactured crystalline compound with active grinding agent. Proprietary zirconia with special active grinding agent. Premium Blue-fired, Friable Aluminum Oxide with active grinding agent. The wedge shape of this tough grain is made for long life and stock removal.its cutting edges work great for grinding and cutting: Ferrous metals. Iron. Steel. This extremely tough and sharp gain is made for high stock removal. Long life and cool running are characteristics of the high performance grain. Its constant selfsharpening edges work well on: Ferrous metals. Stainless steel. Other high tensile alloys. A very hard and sharp abrasive grain that allows for very fast stock removal and at the same time runs cool. Silicon carbide grains work well with very light pressure. This grain is made to work well on: Stone, concrete, marble and granite. Non-ferrous metals such as aluminum, bronze as well as glass. This special grain was developed for superior work on stainless steel. The mixture of zirconia and aluminum oxide was developed to avoid to overheating, glazing and discoloration. It has exceptional stock removal properties. Stainless steel. GRIT COARSE GRINDING COARSE FINISH MEDIUM FINISH FINISH FINE FINISH Removal of heavy duty welding bead Grinding on structural steel Removal of imperfections Rust removal and surface preparation Mold and die polishing Removal of burr and flash Blending Clean Finish FLEXIBILITY STOCK REMOVAL/GRINDING FLEXIBILITY SANDING/BLENDING Discs with less flexibility are designed for aggressive stock removal. Discs with low flexibility are excellent for grinding where a lot of material needs to be removed. Discs with high flexibility are designed for light grinding, sanding, blending, and finishing. Highly flexible discs are also ideal for increased flexibility when working on uneven or curved surfaces. TYPE 29 TYPE 27 Use Type 29 Maxidiscs for the maximum aggressiveness and full use of each flap when grinding at an angle. Use Type 27 Maxidiscs for smooth grinding, blending and increased flexibility. Building construction Air ducts Food equipment fabrication Stainless steel fabrication Liquid storage tank fabricators Mold and die polishing Elevator manufacturers Fiberglass boat building/repair Sheet metal fabricators Bridge builders Pain removal Railroad car builders Enclosure manufacturers Construction equipment sales/repair Propeller manufacturers Fire sprinkler manufacturers Dairy equipment manufacturers Truck and car body fabrication Ornamental iron shops Aircraft manufacturers

14 RADIAL FLAP DISC the pearl MAXIDISC PRODUCTION CHART APPLICATIONS MAXIDISCS ABRASIVE MATERIALS FLAP CONFIGURATIONS GRAIN FLAP BACKING FLAP FLEXIBILITY SHAPE TYPE USE ON STOCK REMOVAL AND GRINDING Tuff Max Zirconia 50% POLYESTER 50% COTTON Type 27 Ferrous metalsiron, steel and stainless steel. X-tra Edge ZY Zirconia 50% POLYESTER 50% COTTON Type 27 Ferrous metals, iron, steel, stainless steel and other high tensile alloys. GENERAL PURPOSE Grinding Cleaning Edge Chamfering Deflasing SilverLine Zirconia SilverLine Aluminum Oxide Zirconia Aluminum Oxide 50% POLYESTER 50% COTTON 100% POLYESTER Type 27 Type 29 Type 27 Ferrous metalsiron, steel, stainless steel and other high tensile alloys. Ferrous metals, iron, steel. GRINDING, SANDING, BLENDING AND POLISHING Pearl Zirconia Pearl Aluminum Oxide Zirconia Aluminum Oxide 50% POLYESTER 50% COTTON 100% POLYESTER Type 27 Type 29 Type 27 Ferrous metalsiron, steel and stainless steel. Ferrous metals, iron, steel. Non ferrous metals, aluminum, brass and copper. FOR STAIN STEEL StainlessMax Special Coated Zirconia 100% POLYESTER Type 27 Stainless steel. FOR STONE, ALUMINUM AND GLASS Maxidisc C Silicon Carbide 100% POLYESTER Type 27 Marble, granite, concrete, stone, cast iron. Nonferrous materials and glass. SPECIAL APPLICATION Pearl Classic Aluminum Oxide 50% POLYESTER 50% COTTON Type 27 Ferrous metals, iron, steel and stainless steel.

15 MAXIDISC - FLAP DISCS MAXIDISC FLAP DISCS SILVER LINE Ferrous Metals, Iron, Steel BACKING 100% POLYESTER FLEXIBILITY MX4040T 4 x 5/8 A40 13, MX4060T 4 x 5/8 A60 13, MX4080T 4 x 5/8 A80 13, MX4100T 4 x 5/8 A100 13, MX4120T 4 x 5/8 A120 13, MX4540T 4-1/2 x 7/8 A40 13, MX4540TH 4-1/2 x 5/8-11 A40 13, MX4560T 4-1/2 x 7/8 A60 13, MX4560TH 4-1/2 x 5/8-11 A60 13, MX4580T 4-1/2 x 7/8 A80 13, MX4580TH 4-1/2 x 5/8-11 A80 13, MX45100T 4-1/2 x 7/8 A100 13, MX4510TH 4-1/2 x 5/8-11 A100 13, MX4512T 4-1/2 x 7/8 A120 13, MX45120TH 4-1/2 x 5/8-11 A120 13, MX5040T 5 x 7/8 A40 12, MX5040TH 5 x 5/8-11 A40 12, MX5060T 5 x 7/8 A60 12, MX5060TH 5 x 5/8-11 A60 12, MX5080T 5 x 7/8 A80 12, MX5080TH 5 x 5/8-11 A80 12, MX5100T 5 x 7/8 A100 12, MX5100TH 5 x 5/8-11 A100 12, MX5120T 5 x 7/8 A120 12, MX5120TH 5 x 5/8-11 A120 12, MX7040T 7 x 7/8 A40 8, MX7040TH 7 x 5/8-11 A40 8, MX7060T 7 x 7/8 A60 8, MX7060TH 7 x 5/8-11 A60 8, MX7080T 7 x 7/8 A80 8, MX7080TH 7 x 5/8-11 A80 8, MX7100T 7 x 7/8 A100 8, MX7100TH 7 x 5/8-11 A100 8, MX7120T 7 x 7/8 A120 8, MX7120TH 7 x 5/8-11 A120 8, SHAPE PREMIUM Ferrous Metals, Iron, Steel. Nonferrous, Aluminum, Brass, Copper BACKING 100% POLYESTER FLEXIBILITY MAX x 5/8 A40 13,700 10/100 MAX x 5/8 A60 13,700 10/100 MAX x 5/8 A80 13,700 10/100 MAX x 5/8 A100 13,700 10/100 MAX x 5/8 A120 13,700 10/100 MAX /2 x 7/8 A40 11,000 10/100 MAX4540H 4-1/2 x 5/8-11 A40 11, MAX /2 x 7/8 A60 11,000 10/100 MAX4560H 4-1/2 x 5/8-11 A60 11, MAX /2 x 7/8 A80 11,000 10/100 MAX4580H 4-1/2 x 5/8-11 A80 11, MAX /2 x 7/8 A100 11,000 10/100 MAX4510H 4-1/2 x 5/8-11 A100 11, MAX /2 x 7/8 A120 11,000 10/100 MAX45120H 4-1/2 x 5/8-11 A120 11, MAX x 7/8 A40 11,000 10/100 MAX5040H 5 x 5/8-11 A40 11, MAX x 7/8 A60 11,000 10/100 MAX5060H 5 x 5/8-11 A60 11, MAX x 7/8 A80 11,000 10/100 MAX5080H 5 x 5/8-11 A80 11, MAX x 7/8 A100 11,000 10/100 MAX5100H 5 x 5/8-11 A100 11, MAX x 7/8 A120 11,000 10/100 MAX5120H 5 x 5/8-11 A120 11, MAX x 7/8 A40 6,000 10/100 MAX7040H 7 x 5/8-11 A40 6, MAX x 7/8 A60 6,000 10/100 MAX7060H 7 x 5/8-11 A60 6, MAX x 7/8 A80 6,000 10/100 MAX7080H 7 x 5/8-11 A80 6, MAX x 7/8 A100 6,000 10/100 MAX7100H 7 x 5/8-11 A100 6, SHAPE GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 15

16 MAXIDISC - FLAP DISCS NEW NEW ZIRCONIA TUFF MAX Ferrous Metals- Iron, steel and Stainless Steel SPECIAL COAT ZIRCONIA STAIN MAX STAIN STEEL BACKING 50% POLYESTER 50% COTTON FLEXIBILITY SHAPE BACKING 100% POLYESTER FLEXIBILITY SHAPE GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS MAX4536Z 4-1/2 x 7/8 Z36 13, MAX4536ZH 4-1/2 x 5/8-11 Z36 13, MAX4540Z 4-1/2 x 7/8 Z40 13, MAX4540ZH 4-1/2 x 5/8-11 Z40 13, MAX4540ZS 4-1/2 x 7/8 Z40 13, MAX4540ZSH 4-1/2 x 5/8-11 Z40 13, MAX4560ZS 4-1/2 x 7/8 Z60 13, MAX4560ZSH 4-1/2 x 5/8-11 Z60 13, MAX4580ZS 4-1/2 x 7/8 Z80 13, MAX4580ZSH 4-1/2 x 5/8-11 Z80 13, ZIRCONIA SILVER LINE Ferrous Metals- Iron, steel and Stainless Steel ZIRCONIA PREMIUM Ferrous Metals- Iron, steel and Stainless Steel BACKING 50% POLYESTER 50% COTTON FLEXIBILITY SHAPE T-29 BACKING 50% POLYESTER 50% COTTON FLEXIBILITY SHAPE T-29 MX4040ZT 4 x 5/8 Z40 13, MX4060ZT 4 x 5/8 Z60 13, MX4080ZT 4 x 5/8 Z80 13, MX4540ZT 4-1/2 x 7/8 Z40 13, MX454ZTH 4-1/2 x 5/8-11 Z40 13, MX4560ZT 4-1/2 x 7/8 Z60 13, MX456ZTH 4-1/2 x 5/8-11 Z60 13, MX4580ZT 4-1/2 x 7/8 Z80 13, MX458ZTH 4-1/2 x 5/8-11 Z80 13, MX5040ZT 5 x 7/8 Z40 12, MX540ZTH 5 x 5/8-11 Z40 12, MX5060ZT 5 x 7/8 Z60 12, MX560ZTH 5 x 5/8-11 Z60 12, MX5080ZT 5 x 7/8 Z80 12, MX580ZTH 5 x 5/8-11 Z80 12, MX7040ZT 7 x 7/8 Z40 8, MX740ZTH 7 x 5/8-11 Z40 8, MX7060ZT 7 x 7/8 Z60 8, MX760ZTH 7 x 5/8-11 Z60 8, MX7080ZT 7 x 7/8 Z80 8, MX780ZTH 7 x 5/8-11 Z80 8, T-29 T-29 MX454Z9T 4-1/2 x 7/8 Z40 13, MX454Z9H 4-1/2 x 5/8-11 Z40 13, MX456Z9T 4-1/2 x 7/8 Z60 13, MX456Z9H 4-1/2 x 5/8-11 Z60 13, MX458Z9T 4-1/2 x 7/8 Z80 13, MX458Z9H 4-1/2 x 5/8-11 Z80 13, MAX4040Z 4 x 5/8 Z40 13,700 10/100 MAX4060Z 4 x 5/8 Z60 13,700 10/100 MAX4080Z 4 x 5/8 Z80 13,700 10/100 MAX4540Z 4-1/2 x 7/8 Z40 13,300 10/100 MAX454ZH 4-1/2 x 5/8-11 Z40 13, MAX4560Z 4-1/2 x 7/8 Z60 13,300 10/100 MAX456ZH 4-1/2 x 5/8-11 Z60 13, MAX4580Z 4-1/2 x 7/8 Z80 13,300 10/100 MAX458ZH 4-1/2 x 5/8-11 Z80 13, MAX5040Z 5 x 7/8 Z40 12,000 10/100 MAX504ZH 5 x 5/8-11 Z40 12, MAX5060Z 5 x 7/8 Z60 12,000 10/100 MAX506ZH 5 x 5/8-11 Z60 12, MAX5080Z 5 x 7/8 Z80 12,000 10/100 MAX508ZH 5 x 5/8-11 Z80 12, MAX7040Z 7 x 7/8 Z40 8,500 10/100 MAX704ZH 7 x 5/8-11 Z40 8, MAX7060Z 7 x 7/8 Z60 8,500 10/100 MAX706ZH 7 x 5/8-11 Z60 8, MAX7080Z 7 x 7/8 Z80 8,500 10/100 MAX708ZH 7 x 5/8-11 Z80 8, MAX4540Z9 4-1/2 x 7/8 Z40 13, MAX4540Z9H 4-1/2 x 5/8-11 Z40 13, MAX4560Z9 4-1/2 x 7/8 Z60 13, MAX4560Z9H 4-1/2 x 5/8-11 Z60 13, MAX4580Z9 4-1/2 x 7/8 Z80 13, MAX4580Z9H 4-1/2 x 5/8-11 Z80 13, MAKE IT A PEARL.

17 MAXIDISC - FLAP DISCS ZIRCONIA XTRA EDGE Ferrous Metals, Iron, Steel, Stainless Steel and Other High Tensile Alloys. BACKING MX4540ZYK 4-1/2 x 7/8 Z40 11,000 10/100 MX454ZYKH 4-1/2 x 5/8-11 Z40 11, MX4560ZYK 4-1/2 x 7/8 Z60 11,000 10/100 MX456ZYKH 4-1/2 x 5/8-11 Z60 11, MX4580ZYK 4-1/2 x 7/8 Z80 11,000 10/100 MX458ZYKH 4-1/2 x 5/8-11 Z80 11, CLASSIC BACKING 50% POLYESTER 50% COTTON Ferrous Metals, Iron, Steel 50% POLYESTER 50% COTTON MAX4040K 4 x 5/8 A40 13, MAX4060K 4 x 5/8 A60 13, MAX4080K 4 x 5/8 A80 13, MAX4100K 4 x 5/8 A100 13, MAX4540K 4-1/2 x 7/8 A40 13, MAX4540KH 4-1/2 x 5/8-11 A40 13, MAX4560K 4-1/2 x 7/8 A60 13, MAX4560KH 4-1/2 x 5/8-11 A60 13, MAX4580K 4-1/2 x 7/8 A80 13, MAX4580KH 4-1/2 x 5/8-11 A80 13, MAX45100K 4-1/2 x 7/8 A100 13, MAX4510KH 4-1/2 x 5/8-11 A100 13, MAXIDISC ADAPTER PART NO. MAX5838 FLEXIBILITY FLEXIBILITY SHAPE SHAPE SIZE 5/8 to 3/8, for 4" Maxidisc SILICON CARBIDE BACKING STONE/GLASS Marble, Granite, Concrete, Glass, Cast Iron, Non-Ferrous Metals 100% POLYESTER FLEXIBILITY MAX4080C 4 x 5/8 C80 13,700 10/100 MAX4120C 4 x 5/8 C120 13,700 10/100 MAX4240C 4 x 5/8 C240 13,700 10/100 MAX4320C 4 x 5/8 C320 13,700 10/100 MAX4400C 4 x 5/8 C400 13,700 10/100 MAX4600C 4 x 5/8 C600 13,700 10/100 MAX4580C 4-1/2 x 7/8 C80 13,300 10/100 MX4580CH 4-1/2 x 5/8-11 C80 13, MAX4512C 4-1/2 x 7/8 C120 13,300 10/100 MX4512CH 4-1/2 x 5/8-11 C120 13, MAX4524C 4-1/2 x 7/8 C240 13,300 10/100 MX4524CH 4-1/2 x 5/8-11 C240 13, MAX4532C 4-1/2 x 7/8 C320 13,300 10/100 MX4532CH 4-1/2 x 5/8-11 C320 13, MAX4540C 4-1/2 x 7/8 C400 13,300 10/100 MX4540CH 4-1/2 x 5/8-11 C400 13, MAX4560C 4-1/2 x 7/8 C600 13,300 10/100 MX4560CH 4-1/2 x 5/8-11 C600 13, MAX7080C 7 x 7/8 C80 8,500 10/100 MX7080CH 7 x 5/8-11 C80 8, MAX7120C 7 x 7/8 C120 8,500 10/100 MX7120CH 7 x 5/8-11 C120 8, MAX7240C 7 x 7/8 C240 8,500 10/100 MX7240CH 7 x 5/8-11 C240 8, MAX7320C 7 x 7/8 C320 8,500 10/100 MX7320CH 7 x 5/8-11 C320 8, MAX7400C 7 x 7/8 C400 8,500 10/100 MX7400CH 7 x 5/8-11 C400 8, MAX7600C 7 x 7/8 C600 8,500 10/100 MX7600CH 7 x 5/8-11 C600 8, SHAPE PLASTIC BACKUP PADS FOR MAXIDISCS PART NO. SIZE MAX SPD. FPD40 4" 13,700 FPD50 4-1/2" 13,300 FPD70 7" 8,500 FPD90 9" 6,500 GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 17

18 ITS ALL ABOUT THE GRAIN... ABRASIVE WHEEL PERFORMANCE TYPE OF GRAIN BINDING ELEMENT THREE PREDOMINANT ELEMENTS THAT LIMIT THE PERFORMANCE OF TRADITIONAL ABRASIVE PRODUCTS ARE: 1. Type of Grain 2. Binding Element (bonding agent) 3. Heat Buildup HEAT BUILDUP The net effect of manufacturing abrasive products in the traditional way has not always produced the best results. Pearl Abrasive Company set out to find a solution. The results are abrasive products made using our exclusive Synthetic Resinoid Technology. When it comes to aggressive cutting, grinding and long life SRT products has no match. ENGINEERED GRAIN Most abrasive products are manufactured using the traditional trial and error method of bond development. SRT grain has been engineered to last longer and consistently produce the highest quality finish of any product on the market today. BINDING ELEMENT The proprietary bonding agents used to produce SRT products give the SRT grain its unique color, as well as providing more strength and durability to the wheels. This in turn lessens the vibration the operator feels and improves the overall efficiency of the product. HEAT BUILDUP Heat buildup causes an undesirable finish, SRT products have been engineered to run considerably cooler than the competitive products in the field. Better heat disbursement increases the performance as well as the appearance of the completed work. Engineering products based on SRT Technology has brought about astounding results. It is not uncommon to get as much as 40% increased grinding efficiency from products made using SRT Technology. 150% 125% 100% 75% 50% A PEARL EXCLUSIVE! SYNTHETIC RESINOID TECHNOLOGY MAKE IT A PEARL.

19 WIRE BRUSHES WIRE BRUSHES Pearl has developed a line of wire brushes with the professional in mind. Our brushes have been engineered to achieve maximum performance and life. Developed for use in a wide variety of applications including welding, paint and rust removal as well as surface conditioning. WIRE BRUSHES CARBON WIRE KNOT CUP STAIN WIRE KNOT CUP PT. NUMBER SPECS MAX RPM CLWBK /4 x.020 x M10 x ,500 CLWBK /4 x.020 x M14 x ,500 CLWBK /4 x.020 x 5/ ,500 CLWBK458 4 x.020 x 5/8-11 8,500 CLWBK658 6 x.020 x 5/8-11 6,000 PT. NUMBER SPECS MAX RPM CLWBK210S 2-3/4 x.020 x M10 x ,500 CLWBK214S 2-3/4 x.020 x M14 x ,500 CLWBK258S 2-3/4 x.020 x 5/ ,500 CLWBK458S 4 x.020 x 5/8-11 8,500 CLWBK658S 6 x.020 x 5/8-11 6,000 GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS CARBON WIRE CRIMPED CUP CARBON WIRE CRIMPED WHEEL PT. NUMBER SPECS MAX RPM CLWBC /4 x.012 x M10 x ,500 CLWBC /4 x.012 x M14 x ,500 CLWBC /4 x.012 x 5/ ,500 CLWBC458 4 x.020 x 5/8-11 8,500 CLWBC658 6 x.020 x 5/8-11 6,000 PT. NUMBER SPECS MAX RPM CLWBCW410 4 x.012 x M10 x ,500 CLWBCW414 4 x.012 x M14 x ,500 CLWBCW458 4 x.012 x 5/ ,500 CARBON WIRE KNOT WHEEL REGULAR TWIST STAIN WIRE KNOT WHEEL REGULAR TWIST PT. NUMBER SPECS MAX RPM CLWBK410T 4 x.020 x M10 x ,000 CLWBK414T 4 x.020 x M14 x ,000 CLWBK458T 4 x.020 x 5/ ,000 PIPELINER CLWBP658 6 x.020 x 5/8-11 9,000 PT. NUMBER SPECS MAX RPM CLWBK410TS 4 x.020 x M10 x ,000 CLWBK414TS 4 x.020 x M14 x ,000 CLWBK458TS 4 x.020 x 5/ ,000 CARBON WIRE KNOT WHEEL STRINGER BEAD TWIST STAIN WIRE KNOT WHEEL STRINGER BEAD TWIST PT. NUMBER SPECS MAX RPM CLWBK410B 4 x.020 x M10 x ,000 CLWBK414B 4 x.020 x M14 x ,000 CLWBK458B 4 x.020 x 5/ ,000 PT. NUMBER SPECS MAX RPM CLWBK410BS 4 x.020 x M10 x ,000 CLWBK414BS 4 x.020 x M14 x ,000 CLWBK458BS 4 x.020 x 5/ ,000 TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 19

20 PEARL ABRASIVE COMPANY S PREMIUM DCSRT Grinding Wheel PREMIUM SRT Flexible Wheel- Flextron Flap Disc Maxidisc StainlessMax Flap Disc Maxidisc Zirconia GENERAL PURPOSE White Aluminum Oxide DC Grinding Wheel GENERAL PURPOSE White Aluminum Oxide Flexible Grinding Wheel Fiber Discs Flap Disc Maxidisc X-tra Edge Zirconia Wirebrushes Stripping Discs PREMIUM Cut Off Wheel SRT SlimCut40 Thin Cut Off Wheel QuickMount Mini Conditioning Discs

21 BENCH GRINDING WHEELS T-1 BENCH GRINDING WHEELS Ferrous Metals, Iron, Steel Pearl s bench grinding wheels are designed for use on work benches or floor standing machines. Wheels are not affected by water, oils or acids. Each wheel is balanced and ring tested. One size wheel can fit several different machines using the included bushing set. Use Aluminum Oxide bench grinding wheels for general purpose tool sharpening, light to heavy stock removal on ferrous metals - carbon steel, steel and iron. Use Green Silicon Carbide bench grinding wheels for fast burr free grinding of tungsten carbide tipped tools, ferrous and non-ferrous metals. GREEN SILICON CARBIDE Tungsten Carbide-Tipped Tools, Ferrous and Non-Ferrous Metals BENCH GRINDING WHEELS GRINDING DEPRESSED CENTER WHEELS CUP STONES FLEXIBLE WHEELS MAXIDISCS WIRE BRUSHES BENCH WHEELS T-1 PT. NUMBER SPECS GRIT MAX RPM BA x 1/2 x 1 A36 4,140 BA x 1/2 x 1 A60 4,140 BA x 3/4 x 1 A24 4,140 BA x 3/4 x 1 A36 4,140 BA x 3/4 x 1 A46 4,140 BA x 3/4 x 1 A60 4,140 BA x 3/4 x 1 A80 4,140 BA x 1 x 1 A24 4,140 BA x 1 x 1 A36 4,140 BA x 1 x 1 A46 4,140 BA x 1 x 1 A60 4,140 BA x 1 x 1 A80 4,140 BA x 1 x 1 A24 3,600 BA x 1 x 1 A36 3,600 BA x 1 x 1 A46 3,600 BA x 1 x 1 A60 3,600 BA x 1 x 1 A80 3,600 BA x 1 x 1 A24 3,600 BA x 1 x 1 A36 3,600 BA x 1 x 1 A46 3,600 BA x 1 x 1 A60 3,600 BA x 1 x 1 A80 3,600 BA x 1 x 1-1/4 A24 2,485 BA x 1 x 1-1/4 A36 2,485 BA x 1 x 1-1/4 A60 1,800 BA x 2 x 1-1/4 A24 1,800 BA x 2 x 1-1/4 A36 1,800 BA x 2 x 1-1/4 A60 1,800 Each Bench Wheel Includes a Nested Reducing Bushing Set T-1 PT. NUMBER SPECS GRIT MAX RPM BG x 1/2 x 1 C60 4,140 BG x 1/2 x 1 C80 4,140 BG x 1/2 x 1 C120 4,140 BG x 3/4 x 1 C60 4,140 BG x 3/4 x 1 C80 4,140 BG x 3/4 x 1 C120 4,140 BG x 1 x 1 C60 4,140 BG x 1 x 1 C80 4,140 BG x 1 x 1 C120 4,140 BG x 1 x 1 C60 3,600 BG x 1 x 1 C80 3,600 BG x 1 x 1 C120 3,600 BG x 1 x 1 C60 3,600 BG x 1 x 1 C80 3,600 BG x 1 x 1 C120 3,600 BG x 1 x 1-1/4 C60 2,485 BG x 1 x 1-1/4 C80 2,485 BG x 1 x 1-1/4 C120 2,485 BG x 2 x 1-1/4 C60 1,800 BG x 2 x 1-1/4 C80 1,800 BG x 2 x 1-1/4 C120 1,800 Each Bench Wheel Includes a Nested Reducing Bushing Set TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 21

22 ABRASIVE ALL STAR ABRASIVE ALL STAR ALUMINUM ABRASIVE ALL STAR STAIN STEEL DEPRESSED CENTER GRINDING WHEEL DEPRESSED CENTER GRINDING WHEEL DEPRESSED CENTER GRINDING WHEEL REDLINE MAX A.O. MAX A.O. Super Grain Cooler Grinding Non-Loading Increased Grinding Efficiency DC FOR ALUMINUM Long life Contamination free grinding Non-loading Fast stock removal Cool running DC WHITE ALUMINUM OXIDE Long life Non-burning Clean stock removal High productivity pg.5 pg.7 pg.7 ABRASIVE ALL STAR STAIN STEEL ABRASIVE ALL STAR ABRASIVE ALL STAR FLAP DISCS - MAXIDISC FLAP DISCS - MAXIDISC FLAP DISCS - MAXIDISC MAXIDISC STAIN MAX Great performance /life ratio Cool grinding/better finish Fast stock removal Extremely flexible Long lasting polyester backing MAXIDISC ALUMINUM OXIDE Premium grain Aggressive stock removal Flexible flaps Long lasting polyester backing Resist fracturing Long life CLASSIC MAXIDISC ALUMINUM OXIDE pg.16 pg.15 pg.17 Proven performance Aggressive stock removal Flexible flaps Long life Consistent quality

23 ABRASIVE ALL STAR STAIN STEEL ABRASIVE ALL STAR STAIN STEEL ABRASIVE ALL STAR STAIN STEEL CUT-OFF WHEEL DEPRESSED CENTER GRINDING WHEEL FLEXIBLE GRINDING WHEEL SRT FLEXTRON pg.11 Maximum flexibility High performance grain Great for stainless steel Long lasting Consistent quality SRT DC WHEEL pg.7 Fast grinding performance High performance grain Great on stainless steel Long lasting Consistent quality Increased grinding efficiency SRT CUT-OFF WHEEL pg.25 Aggressive High performance grain Clean cool cutting Great on stainless steel Long lasting Consistent quality ABRASIVE ALL STAR ABRASIVE ALL STAR ABRASIVE ALL STAR MASONRY TURBO CUT FLEXIBLE GRINDING WHEEL THIN CUT-OFF GRINDING WHEEL SLIMCUT40 AND SLIMCUT45 Burn free cuts Non-binding Long life Cool running Fast cutting FLEXIBLE ALUMINUM OXIDE Long life High quality production Exceptional finish Extremely versatile TURBO CUT Non-loading Long life Cool running Flexible grinding Extremely aggressive pg.27 pg.7 pg.28 HURRY! COLLECT THEM ALL!

24 CUT-OFF WHEELS CUTTING CUT-OFF WHEELS THIN CUT-OFF WHEELS TYPE 1 CUT-OFF WHEELS Pearl offers a wide variety of grain configurations to meet all possible cutting requirements. Each wheel is fully reinforced and designed for long life and fast cutting performance. Available sizes 2" to 22" diameters. TYPE 1 CUT-OFF WHEELS SILVER LINE Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes T-1 CW0310T 3 x 1/16 x 3/8 A46T 25, CW0320T 3 x 1/8 x 3/8 A46T 25, CW0330T 3 x 1/16 x 1/4 A46T 25, CW0340T 3 x 1/8 x 1/4 A46T 25, CW0350T 3 x 1/32 x 3/8 A60T 25, CW0360T 3 x 1/32 x 1/4 A60T 25, CW0410T 4 x 1/16 x 3/8 A46T 18, CW0420T 4 x 1/8 x 3/8 A46T 18, CW0430T 4 x 1/16 x 5/8 A46T 18, CW0440T 4 x 1/8 x 5/8 A46T 18, CW0490T 4 x 1/32 x 3/8 A60T 18, CW4510T 4-1/2 x 1/16 x 7/8 A46T 13, CW071DT 7 x 1/8 x, 5/8 A30R 8, CW0716T 7 x 1/16 x 5/8 A46T 8, CW1020T 10 x 1/8 x 1 A30R 6, CW12MAT 12 x 7/64 x 1 A30P 5, CW1220T 12 x 1/8 x 1 A30Q 5, CW122GT* 12 x 1/8 x 1** A30R 6,300 5/25 CW1222GT* 12 x 1/8 x 20mm** A30R 6,300 5/25 CW14MAT 14 x 7/64 x 1 A30P 4, CW1420T 14 x 1/8 x 1 A30Q 4, CW142GT* 14 x 1/8 x 1** A30R 5,400 5/25 CW1422GT* 14 x 1/8 x 20mm** A30R 5,400 5/25 CW1610T 16 x 1/8 x 1** A30R 3, CW1810T 18 x 1/8 x 1** A30S 3, CW201GT 20 x 1/8 x 1** A30S 3, CW202GT 20 x 5/32 x 1** A30S 3, *For High Speed Machines **Triple Reinforced 24 MAKE IT A PEARL.

25 CUT-OFF WHEELS PREMIUM Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes T-1 CW x 1/16 x 3/8 A54T 38, CW x 1/8 x 1/4 A54T 38, CW x 1/8 x 3/8 A54T 38, CW /2 x 1/16 x 1/4 A54T 29, CW /2 x 1/16 x 3/8 A54T 29, CW /2 x 1/8 x 1/4 A54T 29, CW /2 x 1/8 x 3/8 A54T 29, CW x 1/16 x 3/8 A46T 25, CW x 1/8 x 3/8 A46T 25, CW x 1/16 x 1/4 A46T 25, CW x 1/8 x 1/4 A46T 25, CW x 1/32 x 3/8 A60T 25, CW x 1/16 x 3/8 A46T 18, CW x 1/8 x 3/8 A46T 18, CW x 1/16 x 5/8 A46T 18, CW x 1/8 x 5/8 A46T 18, CW x 1/16 x 1/4 A46T 18, CW x 1/8 x 1/4 A46T 18, CW x 1/16 x 7/8 A46T 18, CW x 1/8 x 7/8 A46T 18, CW x 1/32 x 3/8 A60T 18, CW049A 4 x 1/32 x 5/8 A60T 18, CW /2 x 1/16 x 7/8 A46T 13, CW /2 x 1/8 x 7/8 A46S 13, CW061D 6 x 1/8 x, 5/8 A36R 10, CW0710D 7 x 1/8 x, 5/8 A36R 8, CW0716A 7 x 1/16 x 7/8 A60T 8, CW0810D 8 x 1/8 x, 5/8 A36R 6, CW x 1/16 x 1 A36R 6, CW x 1/8 x 1 A36T 6, CW1020A 10 x 1/8 x 5/8 A36T 6, CW12MA 12 x 7/64 x 1 A36P 5,100 5/25 CW x 1/8 x 1 A36T 5,100 5/25 CW122G* 12 x 1/8 x 1** A36T 6,300 5/25 CW1222G* 12 x 1/8 x 20mm** A36T 6,300 5/25 CW14MA 14 x 7/64 x 1 A36P 4,400 5/25 CW x 1/8 x 1 A36S 4,400 5/25 CW142G* 14 x 1/8 x 1** A36S 5,400 5/25 CW1422G* 14 x 1/8 x 20mm** A36S 5,400 5/25 CW x 1/8 x 1 A36S 3,800 10/40 CW x 5/32 x 1 A36S 3,800 10/40 CW x 1/8 x 1 A36S 3, CW201G 20 x 1/8 x 1 A30S 3, CW201GE 20 x 1/8 x 1 A30P 3, CW202G 20 x 5/32 x 1 A30S 3, CW202GE 20 x 5/32 x 1 A30P 3, CWX20 20 x 5/32 x 1 A30T 3, CW x 5/32 x 1 A30T 2, *For High Speed Machines **Triple Reinforced SYNTHETIC RESINOID TECHNOLOGY STAIN STEEL Ferrous Metals- Iron, steel and Other High Tensile Alloys T-1 CW310SRT 3 x 1/16 x 3/8 SRT46 25, CW330SRT 3 x 1/16 x 1/4 SRT46 25, CW350SRT 3 x 1/32 x 3/8 SRT60 25, CW410SRT 4 x 1/16 x 3/8 SRT46 18, CW430SRT 4 x 1/16 x 5/8 SRT46 18, CW490SRT 4 x 1/32 x 3/8 SRT60 18, CW071DSR 7 x 1/8 x, 5/8 SRT36 8,500 25/100 CW1020SR 10 x 1/8 x 1 SRT36 6,100 25/50 CW12MASR 12 x 7/64 x 1 SRT36 5,100 5/25 CW1220SR 12 x 1/8 x 1 SRT36 5,100 5/25 CW12GSR* 12 x 1/8 x 1 SRT36 6,300 5/25 CW122GSR* 12 x 1/8 x 20mm SRT36 6,300 5/25 CW14MASR 14 x 7/64 x 1 SRT36 4,400 5/25 CW1420SR 14 x 1/8 x 1 SRT36 4,400 5/25 CW14GSR* 14 x 1/8 x 1 SRT36 5,400 5/25 CW142GSR* 14 x 1/8 x 20mm SRT36 5,400 5/25 CW1610SR 16 x 1/8 x 1 SRT36 3,800 10/40 CW1630SR 16 x 5/32 x 1 SRT36 3,800 10/40 *For High Speed Machines MANDRELS AND ADAPTERS FOR CUT-OFF WHEELS MANDRELS PART NO. SIZE ADM25 1/4 and 3/8 combination mandrel 1/4 shank ADAPTERS PART NO. SIZE CAD158 1 to 5/8 Adapter CAD178 1 to 7/8 Adapter CAD120 1 to 20mm Adapter CADD58 to 5/8 Adapter CUTTING CUT-OFF WHEELS THIN CUT-OFF WHEELS TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 25

26 CUT-OFF WHEELS STUD CUTTING NEW DIAMOND DUCTILE IRON BLADES NEW Ferrous Metals, Iron, Steel, Tube, Pipe & Light Gauge Metals Wet and Dry Cutting of Ductile Iron T-1 CW14STUD 14 x 3/32 x 1 A46S 4, ZIRCONIA Ferrous Metals, Iron, Steel NEW 75 TO 1 AGAINST ABRASIVE WHEELS! Ductile Iron Blades provide a clean and fast cut. Ductile Iron Blades cut twice as fast and with fewer blade changes than traditional abrasive wheels, the cost per cut is lowered. Special coating of electroplated silicon carbide dresses the blade and prevents dragging. Consistent cutting depth. Fast cut. Laser-welded diamond segments ensure safety. CUTTING CUT-OFF WHEELS THIN CUT-OFF WHEELS T-1 CW0310Z 3 x 1/16 x 3/8 Z30 25, CW0330Z 3 x 1/16 x 1/4 Z30 25, CW0350Z 3 x 1/32 x 3/8 Z60 25, CW0410Z 4 x 1/16 x 3/8 Z30 18, CW0430Z 4 x 1/16 x 5/8 Z30 18, CW0490Z 4 x 1/32 x 3/8 Z60 18, T-1 PT. NUMBER SPECS MAX RPM PCS/BOX DIA012DB 12 x.100 x 1 6,300 1 DIA12DB2 12 x.100 x 20mm 6,300 1 DIA014DB 14 x.110 x 1 5,400 1 DIA14DB2 14 x.110 x 20mm 5,400 1 SILICON CARBIDE SILVER LINE MASONRY Concrete, Stone, Cast Iron and Non-Ferrous Metals SILICON CARBIDE PREMIUM MASONRY Concrete, Stone, Cast Iron and Non-Ferrous Metals T-1 CM071DT 7 x 1/8 x, 5/8 Adap. C30R 8, CM1210T* 12 x 1/8 x 7/8, 2G C24R 6, CM122GT* 12 x 1/8 x 1, 2G C24R 6,300 5/25 CM1222GT* 12 x 1/8 x 20mm** C24R 6,300 5/25 CM1230GT* 12 x 3/16 x 1** ***C24R 6, CM142GT* 14 x 1/8 x 1** C24R 5,400 5/25 CM1422GT* 14 x 1/8 x 20mm** C24R 5,400 5/25 CM1430GT* 14 x 3/16 x 1** ***C24R 5, CM1610GT 16 x 1/8 x 1** C24R 4, CM1630GT 16 x 3/16 x 1** ***C24R 4, *For High Speed Machines **Triple Reinforced ***With Pinhole T-1 CM061D 6 x 1/8 x, 5/8 C36R 10, CM0710D 7 x 1/8 x, 5/8 C36R 8, CM0810D 8 x 1/8 x, 5/8 C36R 6, CM x 1/8 x 1 C36S 6, CM1210* 12 x 1/8 x 7/8** C36S 6, CM1220* 12 x 1/8 x 1** C36S 6,300 5/25 CM1222* 12 x 1/8 x 20mm** C36S 6,300 5/25 CM1230* 12 x 5/32 x 1** C36S 6,300 5/25 CM1410A* 14 x 1/8 x 7/8** C36S 5,400 25/50 CM1420A* 14 x 1/8 x 1** C36S 5,400 5/25 CM1422A* 14 x 1/8 x 20mm** C36S 5,400 5/25 CM1430A* 14 x 1/8 x 1** ***C36S 5,400 5/25 CM1440A* 14 x 1/4 x 1** ***C36S 5,400 5/25 *For High Speed Machines **Triple Reinforced ***With Pinhole 26 MAKE IT A PEARL.

27 THIN CUT-OFF WHEELS Type 1 Slimcut40 and Type 27 Slimcut45 are thin cut-off wheels from Pearl. Use on ferrous and non-ferrous metals - steel, sheet metal, light gauge metals, copper and stainless steel. THIN CUT-OFF WHEELS TYPE 1 SLIMCUT40 Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel T-1 CW4532A 4-1/2 x.040 x 7/8 A46 13, CW0532A 5 x.040 x 7/8 A46 12, CW0532B 5 x.040 x 5/8 A46 12, CW0632A 6 x.040 x 7/8 A46 10, CW0632B 6 x.040 x 5/8 A46 10, CW0632C 6 x.040 x 1/2 A46 10, CW0632D 6 x.040 x 3/8 A46 10, CW0732A 7 x.040 x 7/8 A46 8, TYPE 27 SLIMCUT45 Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel THIN WHEELS PRODUCED WITH SAFETY AND PERFORMANCE CHARACTERISTICS BUILT IN. BURR-FREE CUTS, FAST START CUTS, COOL CUTS! Pearl Abrasive Co. uses a unique aluminum oxide grain and special bonding agent to manufacture Slimcut Type-1 and Type-27 thin cut-off wheels. Fast, burr-free cutting and long life are the results of this exceptional process. These remarkable wheels are externally reinforced for safety and stability. This fortified formula help Slimcut Wheels resist the stresses and binding that occur with competitive thin wheels. DCW04A 4 x.045 x 5/8 A46 13, DCW45A 4-1/2 x.045 x 7/8 A46 13, DCW05A 5 x.045 x 7/8 A46 12, DCW06A 6 x.045 x 7/8 A46 10, DCW07A 7 x.045 x 7/8 A46 8, WHEEL LIFE Competitor A Competitor B 50

28 SURFACE PREPARATION SURFACE PREPARATION SILICON CARBIDE TURBO CUT DISC CONCRETE Stone, Cast Iron and Non-Ferrous Metals SILICON CARBIDE STRIPPING (NON-WOVEN DISC) Ferrous Metals- Iron, steel. Paint, Rust and Stain Removal FSP /2 x 7/8 C16 13,300 50/400 FSP x 7/8 C16 8,500 25/200 HEAVY DUTY RUBBER BACKUP PADS FOR TURBO CUT DISCS BPFTC45 4-1/2 x 5/8-11 Center nut 13,300 BPFTC70 7 x 5/8-11 Center nut 8,600 FLAP WHEELS Ferrous Metals, Iron, Steel, Stainless Steel, Aluminum, Copper, Wood, Plastic and fiberglass PT. NUMBER SPECS MAX RPM PCS/BOX STRIP40 4 x 5/8 13, STRIP45 4-1/2 x 7/8 11, STRIP70 7 x 7/8 6,500 5 QUICK MOUNT MINI CONDITIONING DISCS Ferrous Metals, Iron, Steel, Stainless Steel SURFACE PREP TURBO CUT STRIPPING DISCS FLAP WHEELS QUICKMOUNT NON-WOVEN DISCS 28 FL13460* 1 x 3/4 A60 25, FL13480* 1 x 3/4 A80 25, FL134120* 1 x 3/4 A120 25, FL134180* 1 x 3/4 A180 25, FL11060* 1 x 1 A60 25, FL11080* 1 x 1 A80 25, FL110120* 1 x 1 A120 25, FL110180* 1 x 1 A180 25, FL11260* 1-1/2 x 1 A60 25, FL11280* 1-1/2 x 1 A80 25, FL112120* 1-1/2 x 1 A120 25, FL112180* 1-1/2 x 1 A180 25, FL21060* 2 x 1 A60 25, FL21080* 2 x 1 A80 25, FL210120* 2 x 1 A120 25, FL210180* 2 x 1 A180 25, FL21260* 2-1/2 x 1 A60 20, FL21280* 2-1/2 x 1 A80 20, FL212120* 2-1/2 x 1 A120 20, FL212180* 2-1/2 x 1 A180 20, FL31060* 3 x 1 A60 20, FL31080* 3 x 1 A80 20, FL310120* 3 x 1 A120 20, FL310180* 3 x 1 A180 20, FL x 1 x 1 A60 6, FL x 1 x 1 A80 6, FL x 1 x 1 A120 6, FL x 2 x 1 A60 6, FL x 2 x 1 A80 6, FL x 2 x 1 A120 6, *With 1/4 shank NON-WOVEN DISCS NW2CQ 2" Coarse/Brown 20, NW2MQ 2" Medium/Maroon 20, NW2FQ 2" Fine/Blue 20, NW3CQ 3" Coarse/Brown 18, NW3MQ 3" Medium/Maroon 18, NW3FQ 3" Fine/Blue 18, LAMINATED CLOTH DISCS CD2024Q 2" A24 20, CD2036Q 2" A36 20, CD2050Q 2" A50 20, CD2060Q 2" A60 20, CD2080Q 2" A80 20, CD2100Q 2" A100 20, CD2120Q 2" A120 20, CD3024Q 3" A24 18, CD3036Q 3" A36 18, CD3050Q 3" A50 18, CD3060Q 3" A60 18, CD3080Q 3" A80 18, CD3100Q 3" A100 18, CD3120Q 3" A120 18, QUICK MOUNT BACKUP PADS FOR CONDITIONING DISCS WITH 1/4 SHANK PART NO. BPMX02Q BPMX03Q SIZE 2" Backup Pad 3" Backup Pad MAKE IT A PEARL.

29 FIBER DISCS - COATED FIBER DISCS COATED Pearl fiber discs have been engineered using the latest in electrostatic grain placement technology. Designed for blending, sanding and finish work. Pearl fiber discs are available in a variety of grits, grains and sizes. These discs feature a special mix of grain for high performance and life. FIBER DISCS SILVER LINE Ferrous Metals, Iron, Steel PREMIUM Ferrous Metals, Iron, Steel, Non-Ferrous Metals, Sheet Metals, Fiberglass FD4024X 4 x 5/8 A24 15, FD4036X 4 x 5/8 A36 15, FD4050X 4 x 5/8 A50 15, FD4060X 4 x 5/8 A60 15, FD4080X 4 x 5/8 A80 15, FD4100X 4 x 5/8 A100 15, FD4120X 4 x 5/8 A120 15, FD4516X 4-1/2 x 7/8 A16 13, FD4524X 4-1/2 x 7/8 A24 13, FD4536X 4-1/2 x 7/8 A36 13, FD4550X 4-1/2 x 7/8 A50 13, FD4560X 4-1/2 x 7/8 A60 13, FD4580X 4-1/2 x 7/8 A80 13, FD45100X 4-1/2 x 7/8 A100 13, FD45120X 4-1/2 x 7/8 A120 13, FD5024X 5 x 7/8 A24 11, FD5036X 5 x 7/8 A36 11, FD5050X 5 x 7/8 A50 11, FD5060X 5 x 7/8 A60 11, FD5080X 5 x 7/8 A80 11, FD5100X 5 x 7/8 A100 11, FD5120X 5 x 7/8 A120 11, FD7016X 7 x 7/8 A16 8, FD7024X 7 x 7/8 A24 8, FD7036X 7 x 7/8 A36 8, FD7050X 7 x 7/8 A50 8, FD7060X 7 x 7/8 A60 8, FD7080X 7 x 7/8 A80 8, FD7100X 7 x 7/8 A100 8, FD7120X 7 x 7/8 A120 8, FD9016X 9 x 7/8 A16 6, FD9024X 9 x 7/8 A24 6, FD9036X 9 x 7/8 A36 6, FD9050X 9 x 7/8 A50 6, FD9060X 9 x 7/8 A60 6, FD9080X 9 x 7/8 A80 6, FD9100X 9 x 7/8 A100 6, FD9120X 9 x 7/8 A120 6, FD4016G 4 x 5/8 A16 15, FD4024G 4 x 5/8 A24 15, FD4036G 4 x 5/8 A36 15, FD4050G 4 x 5/8 A50 15, FD4060G 4 x 5/8 A60 15, FD4080G 4 x 5/8 A80 15, FD4100G 4 x 5/8 A100 15, FD4120G 4 x 5/8 A120 15, FD4516G 4-1/2 x 7/8 A16 13, FD4524G 4-1/2 x 7/8 A24 13, FD4536G 4-1/2 x 7/8 A36 13, FD4550G 4-1/2 x 7/8 A50 13, FD4560G 4-1/2 x 7/8 A60 13, FD4580G 4-1/2 x 7/8 A80 13, FD45100G 4-1/2 x 7/8 A100 13, FD45120G 4-1/2 x 7/8 A120 13, FD5024G 5 x 7/8 A24 11, FD5036G 5 x 7/8 A36 11, FD5050G 5 x 7/8 A50 11, FD5060G 5 x 7/8 A60 11, FD5080G 5 x 7/8 A80 11, FD5100G 5 x 7/8 A100 11, FD5120G 5 x 7/8 A120 11, FD7016G 7 x 7/8 A16 8, FD7024G 7 x 7/8 A24 8, FD7036G 7 x 7/8 A36 8, FD7050G 7 x 7/8 A50 8, FD7060G 7 x 7/8 A60 8, FD7080G 7 x 7/8 A80 8, FD7100G 7 x 7/8 A100 8, FD7120G 7 x 7/8 A120 8, FD9016G 9 x 7/8 A16 6, FD9024G 9 x 7/8 A24 6, FD9036G 9 x 7/8 A36 6, FD9050G 9 x 7/8 A50 6, FD9060G 9 x 7/8 A60 6, FD9080G 9 x 7/8 A80 6, FD9100G 9 x 7/8 A100 6, FD9120G 9 x 7/8 A120 6, SANDING FIBER DISCS FIL-FREE DISCS CLOTH BELTS SHOP ROLLS SANDPAPERS TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 29

30 FIBER DISCS - COATED ZIRCONIA SILICON CARBIDE Ferrous Metals- Iron, steel and Stainless Steel FIBERGLASS SANDING FIBER DISCS FIL-FREE DISCS CLOTH BELTS SHOP ROLLS SANDPAPERS FZ /2 x 7/8 Z24 13, FZ /2 x 7/8 Z36 13, FZ /2 x 7/8 Z50 13, FZ /2 x 7/8 Z60 13, FZ /2 x 7/8 Z80 13, FZ x 7/8 Z24 11, FZ x 7/8 Z36 11, FZ x 7/8 Z50 11, FZ x 7/8 Z60 11, FZ x 7/8 Z80 11, FZ x 7/8 Z16 8, FZ x 7/8 Z24 8, FZ x 7/8 Z36 8, FZ x 7/8 Z50 8, FZ x 7/8 Z60 8, FZ x 7/8 Z80 8, FZ x 7/8 Z24 6, FZ x 7/8 Z36 6, FZ x 7/8 Z50 6, FZ x 7/8 Z60 6, FZ x 7/8 Z80 6, SILICON CARBIDE X-WEIGHT CLOTH STONE Marble, Granite, Non Ferrous Metals, Engineered Stone, Concrete, Cast Iron FD7040S 7 x 7/8 C40 8, FD7050S 7 x 7/8 C50 8, FD7060S 7 x 7/8 C60 8, FD7080S 7 x 7/8 C80 8, FD7100S 7 x 7/8 C100 8, FD7120S 7 x 7/8 C120 8, FD7150S 7 x 7/8 C150 8, FD7180S 7 x 7/8 C180 8, FD7220S 7 x 7/8 C220 8, FD7240S 7 x 7/8 C240 8, FD7320S 7 x 7/8 C320 8, FD7400S 7 x 7/8 C400 8, FDS x 7/8 C16 11, FDS x 7/8 C24 11, FDS x 7/8 C36 11, FDS x 7/8 C16 8, FDS x 7/8 C24 8, FDS x 7/8 C36 8, SILICON CARBIDE SPECIAL DESIGN FIBERGLASS PT. NUMBER SPECS GRIT PCS/BOX SANDING AND GRINDING NSAD /2" C NSAD /2" C NSAD /2" C NSAD /2" C NSAD /2" C NSAD /2" C NSAD /2" C POLISHING AND FINISHING LCCD /2" C LCCD /2" C LCCD /2" C SILICON CARBIDE E-WEIGHT HEAVY DUTY STONE Marble, Granite, Non Ferrous Metals, Engineered Stone, Concrete, Cast Iron NEW NEW PT. NUMBER SPECS GRIT PCS/BOX SCDE x 7/8 C SCDE x 7/8 C SCDE x 7/8 C SCDE x 7/8 C SCDE x 7/8 C SCDE x 7/8 C MAKE IT A PEARL.

31 FIL-FREE DISCS FIL-FREE DISCS Pearl s fil-free discs are ideally suited for sanding and finishing a variety of surfaces. Available in a variety of grits, grains and backing weights. Use for sanding wood, paint, fiberglass, body filler and ferrous and non-ferrous metals. FIL-FREE DISCS HEAVY DUTY Ferrous Metals, Iron, Steel LIGHT WEIGHT BACKING Ferrous Metals, Iron, Steel PT. NUMBER SPECS GRIT DISCS/BOX PD5040 5" A PD5060 5" A PD5080 5" A PD5100 5" A PD5120 5" A PD5150 5" A PD5180 5" A PD5220 5" A PD5240 5" A PD5280 5" A PD5320 5" A PD5400 5" A PD6040 6" A PD6060 6" A PD6080 6" A PD6100 6" A PD6120 6" A PD6150 6" A PD6180 6" A PD6220 6" A PD6240 6" A PD6280 6" A PD6320 6" A PD6400 6" A PT. NUMBER SPECS GRIT DISCS/ROLL PDR5080 5" A PDR5100 5" A PDR5120 5" A PDR5150 5" A PDR5180 5" A PDR5220 5" A PDR5240 5" A PDR5280 5" A PDR5320 5" A PDR6080 6" A PDR6100 6" A PDR6120 6" A PDR6150 6" A PDR6180 6" A PDR6220 6" A PDR6240 6" A PDR6280 6" A PDR6320 6" A PDR6400 6" A BACKUP PADS FOR FIBER DISCS SPIRAL-FACED SMOOTH-FACED SANDING FIBER DISCS FIL-FREE DISCS CLOTH BELTS SHOP ROLLS SANDPAPERS PT. NUMBER SPECS MAX RPM BP0410S 4 x M10 x 1.25 Center Nut 20,000 BP4514S 4-1/2 x M14 x 2.0 Center Nut 20,000 BP4558S 4-1/2 x 5/8-11 Center Nut 20,000 BP5058S 5 x 5/8-11 Center Nut 20,000 BP7058S 7 x 5/8-11 Center Nut 10,000 BP9058S 9 x 5/8-11 Center Nut 9,000 PT. NUMBER SPECS MAX RPM BP x M10 x 1.25 Center Nut 20,000 BP /2 x 5/8-11 Center Nut 20,000 BP x 5/8-11 Center Nut 20,000 BP x 5/8-11 Center Nut 10,000 BP x 5/8-11 Center Nut 9,000 TO ORDER, CALL TOLL FREE: (U.S.A.) (CANADA) TOLL FREE FAX: (U.S.A.) (CANADA) 31