TANK WATER HOW TO INSTALL YOUR. Irrigation Systems Tanks & Pumps Water Recycling Landscape lighting Instant turf & seed Ponds & Pumps

Transcription

1 HOW TO INSTALL YOUR Sales Branches: Wantirna 3 Burwood Hwy, (Off Eastlink Freeway) WANTIRNA, VIC, 3152 Ph: (03) E: wantirna@smartwatershop.com.au Irrigation Systems Tanks & Pumps Water Recycling Landscape lighting Instant turf & seed Ponds & Pumps w w w. s m a r t w a t e r s h o p. c o m. a u Braeside Springvale Rd, (Located at Gardenworld) BRAESIDE, VIC, 3195 Ph: (03) E: braeside@smartwatershop.com.au Burwood (Previously Wave Irrigation) Huntingdale Rd, BURWOOD, VIC, 3125 Ph: (03) E: burwood@smartwatershop.com.au Hoppers Crossing (Previously Wave Irrigation) Shop 9, 428 Old Geelong Rd, HOPPERS CROSSING, VIC, 3029 Ph: (03) E: hoppers@smartwatershop.com.au

2 OPTIONAL RAIN OPTIONAL RAIN TO WC OR LAUNDRY IF REQUIRED WALL MOUNTED TAP FIRST FLUSH VALVE OVERFLOW RAIN TYPE A PLANNING OPTIONAL RAIN OPTIONAL RAIN TO WC OR LAUNDRY IF REQUIRED WALL MOUNTED TAP FIRST FLUSH VALVE OVERFLOW RAIN TYPE B PLANNING

3 RAIN PIPE HOLDS UP TO THIS LEVEL MIN. DISTANCE BOTTOM OF RAIN TO INLET TO BE 200mm FROG FLAP FIRST FLUSH UNIT 90mm STORM PIPE SCREW CAP I.O. TO FLUSH SYSTEM STORM PIPE TO BE USED UNDER GROUND TO STORM WET CONNECTION SYSTEM 90mm STORM PIPE DRY CONNECTION SYSTEM TO STORM GUTTER RAIN TO MAKE CHAMBER AS LONG AS POSSIBLE CONNECT TO HOSE AND PLACE IN GARDEN BALL FLOAT FILTER ADJUSTABLE LEAK DRIP FIRST FLUSH SYSTEM

4 FIRST FLUSH UNIT 90mm STORM PIPE SCREW CAP I.O. TO FLUSH SYSTEM RAIN PIPE HOLS UP TO THIS LEVEL MIN. DISTANCE BOTTOM OF RAIN TO INLET TO BE 200mm FROG FLAP LEVEL 500mm MIN. DEPTH TOWN SHUT OFF VALVE OVER FLOW TO BE LOWER THAN TOWN INLET. OVER FLOW TO BE CONNECTED TO STORM SYSTEM. TOWN CONNECTION USING HIGH PRESSURE PVC PIPE FITTINGS (DO NOT CONNECT COPPER PIPE DIRECTLY TO ) STORM PIPE TO BE USED UNDER GROUND TOWN CONNECTION WITH WET CONNECTION SYSTEM NOTE: USING THIS SYSTEM WILL MEAN YOUR WILL NEVER RUN OUT OF. 90mm STORM PIPE SHUT OFF VALVE FLOAT VALVE OVER FLOW TO BE LOWER THAN TOWN INLET. OVER FLOW TO BE CONNECTED TO STORM SYSTEM. 500mm MIN. DEPTH TOWN CONNECTION USING HIGH PRESSURE PVC PIPE FITTINGS (DO NOT CONNECT COPPER PIPE DIRECTLY TO ) TOWN CONNECTION WITH DRYCONNECTION SYSTEM

5 MULTIPLE CONNECTION DOWN PIPE FIRST FLUSH TO STORM LEAVE ALL TAPS OPEN AND S WILL SELF BALANCE LEVEL SIDE VIEW OVERFLOW TO STORM TOP VIEW

6 UNDER HOUSE STORAGE SYSTEM RAIN INLET 450mm min min OUTLET VALVE FLEXIBLE MEMBRANE STORAGE LEVEL AREA UNDER HOUSE NATURAL GROUND LINE RAIN INLET 450mm min OUTLET FLAT STABLE AREA FOR LEVEL HARDSTAND VALVE FLEXIBLE MEMBRANE STORAGE LEVEL AREA UNDER HOUSE

7 USE OF ER TO INCREASE PRESSURE OPTIONAL RAIN ER FIRST FLUSH UNIT COLLECTION TO STORM ER STAND TO ENGINEER S DESIGN AND DETAIL OUTLET FOR USE FACT: TO OBTAIN TOWN PRESSURE, THE ER WOULD NEED TO BE 14 METERS HIGH ABOVE THE KITCHEN SINK.

8 WRONG WAYS TO INSTALL YOUR BASE INDERMINED UNSUPPORTED PIPE WORK PUTS EXCESS STRAIN ON THE FITTINGS ROCKY OR UNEVEN GROUND MUST NOT HAVE UNDERSIZED BASE. CIRCUMFERENCE OF MUST BE SUPPORTED WOODEN SLEEPERS ARE GENERALL TOO UNEVEN AND UNTRUE TO USE FOR BASE SUPPORT DO NOT USE CORRUGATED IRON ON TIMBER BEARERS ON THE GROUND NOTE: NEVER INSTALL A ON A SAND BASE. IF YOU INSTALL YOUR THIS WAY YOUR WARRANTY WILL BE VOID

9 SUPPORT BASES GROUND SUPPORT 250mm 70mm 250mm NON-RETAINED CRUSHER DUST SUPPORT BASE WRONG NATURAL GROUND LINE FILL 70mm NOTE: S INSTALLED THIS WAY MAY VOID YOUR WARRANTY. NEVER USE SAND AS A BASE RETAINED CRUSHER DUST SUPPORT BASE NATURAL GROUND LINE CORRECT NOTE: SLIMLINE S CAN ALSO BE INSTALLED ON PRECAST CONCRETE SLABS ON A FIRM LEVEL BASE CONCRETE SLAB SUPPORT BASE