TS Invisible (concealed) sub-frame
|
|
- Aubrey Melinda Black
- 6 years ago
- Views:
Transcription
1 TS Invisile (onealed) raket-railfix on an aluminum su-frame This system offers large flexiility for installing Trespa Meteon panels, the use of adjustale rakets allow for preise joints and an optimal façade grid. Trespa Meteon panels with a minimum thikness of 3/8 inh* (10 mm) may e fixed invisily on an aluminium su-frame omprising horizontal rails and hanging rakets fixed with expansion anhors to the ak of the panel. > Enoh Pratt Free Lirary, USA > Arh. Cho Benn Holak + Assoiates This doument is intended to provide general reommendations only. Trespa provides these guidelines and all testing, ode and design data for informational purposes only and strongly advises that the ustomer, projet owner and arhitet seek independent advie from a ertified onstrution professional and/or engineer regarding appliation and installation as well as ompliane with design requirements, appliale odes, laws and regulations, and test standards. Please hek your loal odes and appliale design requirements for proper use. * Note that due to onversion, the value provided is approximate. 1
2 Overview of availale ertifiates and test reports To onsult the full details of availale ertifiates please visit TNA systems designated with -285 meet the performane riteria of the NFPA 285 test standard using speifi assemly omponents and system geometry as indiated in Setion: Overview of tehnial installation details. General installation details Cavity depth and ventilation (Free air avity) To meet the geometry requirements of a system ompliant with what has een tested or evaluated to e in aordane with NFPA 285, the free air avity depth etween the akside of the horizontal rail and the fae of the insulation must e 1/2 inh (13 mm*). This free air avity allows for amient air to flow through from the ventilation inlets and outlets. Ventilation perforations must allow for a minimum opening of 2.36 square inhes per linear foot* (50 square m per linear meter) over the whole façade. Cavity depth as well as ventilation inlets and outlets must e in aordane with appliale uilding standards, regulations and ertifiates. environment. Predrilled panels must e stored under dry onditions. Failure to omply may result in visile panel surfae deformation. Eah panel has two adjusting points. To retain panel position, the panel must have one fixed point at the top y inserting a self-drilling srew (or similar) through the hanging raket and into the rail. Fixing method: 防 TU-S fastener (rivet srew) TU-S fastener (rivet srew) Su-frame Trespa Meteon panels must e installed on a su-frame, omprised of aluminum extrusions, of suffiient strength and permanent duraility. Quality and/or treatment of the su-frame must e in aordane with appliale uilding standards, regulations and ertifiates. Fixing detail Panel rakets are attahed to the Trespa Meteon panels using two stainless steel expansion anhors per raket. Hole depth, hole diameter, length and anhoring depth of fixings has to e in aordane with appliale installation guidelines. In order to prevent the ingress of moisture into the lind holes of fixings, holes must e drilled in a dry Remaining panel thikness: 3/32 inh* (2.5 mm). Anhoring depth: total panel thikness minus 1/8 inh* (3 mm). ode V3082 version 2.0 date * Note that due to onversion, the value provided is approximate.
3 Overview of tehnial installation details Installation details for ompliane with the NFPA 285 Multi-story Test TNA systems designated with -285 meet the performane riteria of the NFPA 285 test standard (as determined y full sale testing or an engineering analysis) using speifi assemly omponents and system geometry as indiated in the tale elow. All modifiations to the omponents, geometry and speifiations from the design details indiated should e tested and/or evaluated y a ode onsultant and/or uilding offiial for ompliane with the NFPA 285 test standard. AutoCAD drawings for TS are availale at Additional analysis from a third party expert, inluding aeptale ase wall onstrution, is availale upon request. For additional information and to onfirm the installation, please request this analysis, a test report or additional expert ommentary. Trespa panels Panel olor/deor Uni olors, Metallis Panel thikness 3/8 inh* (10 mm), 1/2 inh* (13 mm) Non-Trespa omponents/geometry to ladding Free air avity (ak fae of rail profile to avity insulation) 1/2 inh (13 mm*) Aluminum profiles (as required y the test report) Cavity insulation (minimum 1 inh (25 mm*)) Mineral wool (unfaed mineral fier insulation that meets ASTM C612) Weather resistive arrier For systems that require ompliane with NFPA 285, use the speifi weather arrier used as part of the tested wall assemly Test reports and other support doumentation providing the full installation details, inluding the aeptale ase wall onstrution, are availale upon request. Tehnial installation details Panel thikness Panel thikness inh* mm 3/8 10 1/2 13 Maximum panel dimension Max. panel dimensions inh* mm 120 x x 1860 * Note that due to onversion, the value provided is approximate. 3
4 Joint width Joint width inh* mm 3/8 10 Based on appliale uilding standards, regulations or ertifiates, wider joints may e permissile. Edge learane Edge learane inh* (mm) Vertial and horizontal edge distane minimum 2 1/2 inh* (65 mm) and maximum 10 x panel thikness, ounted from the enter of the first fixing Reommended maximum fixing distanes Maximum Fixing distanes A Panel Thikness for Satin / Rok / Matt Panel Thikness for Gloss B inh* mm inh* mm inh* mm 3/8 10 1/2 13 1/ fasteners in one diretion or more fasteners in one diretion A The maximum permitted fixing distanes shown have een designed with a maximum (wind) load of 20 pounds per square foot (psf) and a maximum defletion riteria of L/175. B Based on the surfae properties of Gloss panels, fixing distanes are redued. Fixing distanes must e alulated in aordane with appliale loal standards, regulations and ertifiates and should e verified y a strutural engineer. For more information aout defletion and wind loads, please visit x x x Fixing and edge learanes a = horizontal fixing distane = vertial fixing distane = edge learane = fixed point = adjusting point = sliding point: Lower rakets fixed higher at suh a level as to failitate downward panel movement 0.03 in per foot* (2.5 mm per metre) ode V3082 version 2.0 date a a a * Note that due to onversion, the value provided is approximate. 4
5 TS Horizontal ross-setion 1. Interior sheathing** 2. Thermal insulation** 3. Steel stud** / aking plate** 4. Exterior sheathing** 5. Weather arrier (vapor permeale)** For systems that require ompliane with NFPA 285, use the speifi weather arrier used as part of the tested wall assemly 6. Mineral wool** 7. Ventilated avity** 8. J-hannel** 9. Rail** 10. Aluminum spaer** 11. Adjustale raket** 12. Channel anhor** 13. Trespa Meteon panel 14. Rail anhor** ** not y Trespa TS Horizontal ross-setion
6 TS Vertial ross-setion Interior sheathing** 2. Thermal insulation** 3. Steel stud** / aking plate** 4. Exterior sheathing** 5. Weather arrier (vapor permeale)** For systems that require ompliane with NFPA 285, use the speifi weather arrier used as part of the tested wall assemly 6. Mineral wool** 7. Ventilated avity** 8. J-hannel** 9. Adjustale raket** 10. Rail** 11. Channel anhor** 12. Rail anhor** 13. Aluminum spaer** 14. Trespa Meteon panel 15. Vent sreen** ** not y Trespa ode V3082 version 2.0 date TS Vertial ross-setion
7 Dislaimer This is a print generated y you from ( Wesite ). By aessing the Wesite and printing this doument you have aepted the Terms of Use of the Wesite. Please refer to the Wesite for all onditions that apply to this doument. Not all the systems shown in this doument may e suitale for all appliations and jurisditions. We provide you with testing, ode and design data for informational purposes only and strongly reommend that you or any other user of this doument otains independent advie regarding ompliane with design requirements, appliale odes, laws and regulations, and test standards. Please hek your loal odes and design requirements for proper use. Trespa will not aept any liaility in relation to your use of this doument. All intelletual property rights, inluding opyrights and other rights regarding the ontent of the Wesite and this print generated from the Wesite (inluding logos, trademarks, servie marks, software, dataases, audio, video, text and photographs) are owned y Trespa and/or its liensors. Trespa, Meteon, Izeon, Athlon, TopLa, TopLa PLUS, TopLa ECO-FIBRE, Virtuon, Volkern, Trespa Essentials and Mysti Metallis are registered trademarks of Trespa. All oral and written statements, offers, quotations, sales, supplies, deliveries and/or agreements and all related ativities of Trespa are governed y the Trespa General Terms and Conditions of Sale (Algemene verkoopvoorwaarden Trespa International B.V.) filed with the Chamer of Commere and Industry for Noord- en Midden- Limurg in Venlo (NL) on 11 April 2007 under numer ,whih an e found on and downloaded from the Trespa wesite, All oral and written statements, offers, quotations, sales, supplies, deliveries and/or agreements and all related work of Trespa North Ameria, Ltd. ode V3082 version 2.0 date are governed y the Trespa General Terms and Conditions of Sale, whih an e found on and downloaded from the Trespa wesite, A opy of these general onditions of sale will e provided free of harge on request. 7
TS110 Visible (exposed) fixing with screws on an aluminum sub-frame
TS110 Visile (exposed) fixing with srews on an aluminum su-frame This system offers a ost effetive solution for installing Trespa panels in a large variety of panel dimensions. Trespa Meteon panels with
More informationDEFLECTION AND WIND LOADS
DEFECTION AND WIND OADS This document is intended to provide general recoendations only. Trespa provides these guidelines and all testing, code and design data for informational purposes only and strongly
More informationagainst falling ( Bauteile, die gegen Absturz sichern ) must be observed.
BCONIES This document is intended to provide general recommendations only. Trespa provides these guidelines and all testing, code and design data for informational purposes only and strongly advises that
More informationSuspended ceiling with visible T-sections
Suspended eiling with visible T-setions a E E E max. 300 mm a m Hanger spaing 1 Hanging system: Rihter System 11.2 D 2 E C 26 C Main setion spaing E A Suspended eiling with visible T-setions Produts Table
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: TRESPA NORTH AMERICA, LTD.
0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted ESR 1687 Reissued 02/2016 This report is subject to renewal 02/2017. DIVISION: 07 00 00 THERMAL
More informationTRASH ENCLOSURE APPLICATION Application Date / /
Status Stiker OFFICIAL USE ONLY Community Development - 1050 W Romeo Rd, Romeoville, IL 60446-1530 (815) 886-7200 Fax #: (815) 886-2724 - Email: buildinginspetions@romeoville.org Only Permit #: Permit
More informationGESTRA Steam Systems. Product Range A1 UNA 23h/v UNA 25h/v UNA 26h/v UNA 26h Stainless Steel
Issue Date: 4/09 GETRA team ystems team Traps UNA 23h/v, PN 1, DN 15, 20, 25, 40, 50 UNA 25h/v, PN 40, DN 15, 20, 25, 40, 50 UNA 2h/v, PN 40, DN 15, 20, 25, 40, 50 UNA 2h tainless teel, PN 40, DN 15, 20,
More information7001 Diamond Snap-Form ICF Code Considerations With the multitude of lightweight onrete forming systems in the onstrution market, building offiials are raising questions about ode ompliane and/or ode evaluation
More informationPENNSAFE BUILDING INSPECTION SERVICES LLC PERMIT APPLICATION
PENNSAFE BUILDING INSPECTION SERVICES LLC PERMIT APPLICATION Permit No. 175 Beaver Drive, P.O. Box 486 DuBois, PA 15801 Phone: 814-375-1111 Fax: 814-375-1117 Toll Free: 855-PENNSAF LOCATION OF PROPOSED
More informationMethod Statement - Installation Guide KX05 (Trespa TS300)
1 Method Statement - Installation Guide KX05 (Trespa TS300) General Description Kladfix Systems Profiles and Components are designed to provide a vertical support framework to support Trespa Meteon Panels
More informationTHE CRAFTSMAN MODEL SILVESTRI GROUP
05, Inc. DESIGN GRO PROJET # 05-30 THE RAFTSMAN FOR GRO ANY HANGES TO THESE DRAWINGS MUST BE REPORTED TO DESIGN GRO, IN. IMMEDIATELY IN WRITING. DESIGN GRO, IN ASSUMES NO RESPONSIBILITY FOR HANGES TO THE
More informationZZINC G A Chemical Anchors A4 INOX MIC80 Rebar Fixz (Hybrid Mortar) with VA Rods
11.0 Chemial Anhors 11.1 MIC80 Rebar Fixz (Hybrid Mortar) with VA Rods Produt Features Aurate self-mixing system for guaranteed quality Cure resin is stronger than the substrate Suitable for lose edge
More information] Anchor Size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39. ] Anchor Size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39
11.0 Chemial Anhors 11.5 EPC80 (Pure Epoxy Resin) with VA Rods Produt Features Espeially suitable to high load in onrete appliation Reommended for threaded stud and rebar; either fixation or strutural
More informationInstallation guidelines for façade applications
TRESPA Installation guidelines for façade applications Trespa Meteon is a flat panel based on thermosetting resins, homogenously reinforced with wood fibres and manufactured under high pressure and temperature.
More informationINSTALLATION MANUAL TRESPA.COM
Flush sidings INSTALLATION MANUAL TRESPA.COM 2 INSTALLATION MANUAL 1 A B C D E G F F 2 95-110 mm [3 inch] max. 600 mm [max. 24 inch] max. 186 mm [max. 7.3 inch] 180 mm [7.1 inch] 8 mm [ 0.3 inch] H 3 5
More informationSDI-C-2011 Standard for Composite Steel Floor Deck-Slabs 30 November General
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 1. General SDI-C-2011 Standard for Composite Steel Floor Dek-Slabs 30 November
More informationTapper Concrete Scew Anchor Type 410 & 304 Stainless Steel
Conrete Sew Type 4 & 304 PRODUCT DESCRIPTION The fastening system is a family of srew anhors for light to meium uty appliations in onrete, masonry blok an brik base materials. The is fast an easy to install
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: FUNDERMAX GMBH
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3340 Reissued 05/2017 This report is subject to renewal 05/2018. DIVISION: 07 00 00 THERMAL
More informationComposite Steel Floor Deck-Slabs
AMERICAN NATIONAL STANDARDS / STEEL DECK C - 2017 Standard for Composite Steel Floor Dek-Slabs opyright 2017 steel dek institute 1. General AMERICAN NATIONAL STANDARDS / STEEL DECK 1.1 Sope: A. This Standard
More informationEASY INSTALLATION, DURABLE DESIGN SMART CLADDING SYSTEM
EASY INSTALLATION, DURABLE DESIGN SMART CLADDING SYSTEM CREATE FAÇADES WITHOUT CONCERNS TRESPA PURA NFC PROVIDES A SOLUTION CONSISTING OF PLANKS, FASTENERS AND MATCHING ACCESSORIES. THE CLADDING IS NOT
More informationEASY INSTALLATION, DURABLE DESIGN SMART SIDING SYSTEM
EASY INSTALLATION, DURABLE DESIGN SMART SIDING SYSTEM CREATE FAÇADES WITHOUT CONCERNS TRESPA PURA NFC PROVIDES A SOLUTION CONSISTING OF SIDINGS, FASTENERS AND MATCHING ACCESSORIES. THE SIDINGS ARE NOT
More informationSNOW CREEK ARCHITECTURAL DESIGN GUIDELINES AND CONSTRUCTION AGREEMENT REVISED MARCH 2019
SNOW CREEK ARCHITECTURAL DESIGN GUIDELINES AND CONSTRUCTION AGREEMENT REVISED MARCH 2019 GENERAL INFORMATION The Arhitetural Review Committee ( ARC ) must review and approve all onstrution that takes plae
More informationPlease ALL Questions:
The Enclosed Document Is Provided For Your onvenience. Please Email ALL Questions: MailTo:ontractAdministration@TampaGov.net Please Let Us Know If You Plan To Bid ity of Tampa ontract Administration Department
More informationSTORAGE DESIGN LIMITED - Apex Longspan Literature. The Fundamentals... Can be manufactured to specific sizes at no additional cost
Longspan Shelving The Fundamentals... 5mm adjustability Multiple beam duties Assembled frames Stepped beam profile Hanging garment rail Multi-tier apability an be manufatured to speifi sizes at no additional
More informationData sheet METAL-PLATE CHIP RESISTOR; LOW OHM RLP16,20,32,63, MLP20,32,63. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spe. No.: RLP K HTS 0001 /12 Date: 2017. 4. 21 Data sheet Title: Style: METAL-PLATE CHIP RESISTOR; LOW OHM RLP16,20,32,63, MLP20,32,63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
More informationModuSec. Secure and efficient IT room solutions Composite Panel Systems Compared. Panel Systems are not all the same!
ModuSe Seure and effiient IT room solutions Composite Panel Systems Compared Panel Systems are not all the same! When it omes to aommodating ritial IT systems, the first issue to look at is the environment
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following exerpt are pages from the North Amerian Produt Tehnial Guide, Volume 2: Anhor Fastening, Edition 16.1. Please refer to the publiation in its entirety for omplete details on this produt inluding
More information~ Early Life
Measurements and reporting systems are established Suessful validation of the deployment triggers the launh of Early Life Support (ELS). 6.0 Deploy & Verify - Q)... E Q) t1 Ol Change.r::: t1 0 t1 (jj Ol
More informationTRESPA METEON EXTERIOR SOCIAL HOUSING FOR TOMORROW
EXTERIOR SOCIAL HOUSING FOR TOMORROW MAKE YOUR COMMUNITY TODAY STAND OUT TOMORROW All living space needs to be comfortable, inviting and good-looking. So the aesthetics of residential buildings and areas
More information802, 804, 810 & 812 DRYDEN ROAD 39 CASCADE DRIVE ROCHESTER, NY PHONE SITE DEVELOPMENT PLANS MARATHON C-7.
ONRETE WASHOUT AREA SILT FENE PIPE OUTLET PROTETION FILTER LOTH 50'MIN. 6"MIN. 12'MIN. 1. STONE SIZE - USE 2" STONE, OR RELAIMED OR REYLED ONRETE EQUIVALENT. 2. LENGTH - NOT LESS THAN 50 FEET (EXEPT ON
More informationEITF ABSTRACTS. To take advantage of new capabilities in electronic commerce and advances in computer
EITF ABSTRACTS Issue No. 97-13 Title: Aounting for Costs Inurred in Connetion with a Consulting Contrat or an Internal Projet That Combines Business Proess Reengineering and Information Tehnology Transformation
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: TRESPA NORTH AMERICA, LTD.
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1687 Reissued 02/2017 This report is subject to renewal 02/2018. DIVISION: 07 00
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: PARKLEX USA
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3462 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 07 00
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following exerpt are pages from the North Amerian Produt Tehnial Guide, Volume 2: Anhor Fastening, Edition 16.1. Please refer to the publiation in its entirety for omplete details on this produt inluding
More informationRecommendations of the VA Joint Working Group. Report to Measurement Canada for Consideration Final recommendations achieved in consensus with EPAC
Reommendations of the VA Joint Working Group Report to Measurement Canada for Consideration Final reommendations ahieved in onsensus with EPAC June 17, 2008 Bakground In 2005 Measurement Canada developed
More informationDimensions of propulsion shafts and their permissible torsional vibration stresses
(Feb 2005) (orr.1 Mar 2012) (orr.2 Nov 2012) (Rev.1 Aug 2014) (Rev.2 Apr 2015) Dimensions of propulsion shafts and their permissible torsional vibration stresses.1 Sope This UR applies to propulsion shafts
More informationBBR VT CONA CMI BT. Internal Post-tensioning System with 02 to 61 Strands. European Technical Approval ETA 09/0286
BBR VT with 02 to 61 Strands European Tehnial Approval ETA 09/0286 0432 BBR VT with 02 to 61 Strands BBR VT International Ltd Bahnstrasse 23, 8603 Shwerzenbah (Switzerland) www.bbrnetwork.om S P E C I
More informationWeb buckling strength of beam-to-column connections, September 1970 (74-1) PB / AS
Lehigh University Lehigh Preserve Fritz Laboratory Reports Civil and Environmental Engineering 1970 Web bukling strength of beam-to-olumn onnetions, September 1970 (74-1) PB 234 621/ AS W. F. Chen I. J.
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FIBER CEMENT SIDING REPORT HOLDER: RIEDER FASERBETON ELEMENTE GmbH
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2810 Reissued 02/2018 This report is subject to renewal 07/2018. DIVISION: 07 00
More informationTests on Reinforced Concrete Slabs with Pre-stressing and with Transverse Reinforcement under Impact Loading
20th International Conferene on Strutural Mehanis in Reator Tehnology (SMiRT 20) Espoo, Finland, August 9-14, 2009 SMiRT 20-Division 5, Paper 2015 Tests on Reinfored Conrete Slabs with Pre-stressing and
More informationSHEAR CAPACITY FOR PRESTRESSED-PREFABRICATED HOLLOW CORE CONCRETE SLABS,WITHOUT SHEAR REINFORCEMENT
SHEAR CAPACTY FOR PRESTRESSED-PREFABRCATED HOLLOW CORE CONCRETE SLABS,WTHOUT SHEAR RENFORCEMENT A B S T R A C T PNTEA Augustin, Tehnial University of Cluj-Napoa, e-mail: augustinpintea@yahoo.om Euroode
More informationSuggested Changes to NZS3101:2006 with Amendments 1 and 2
1 Suggested Changes to NZS3101:2006 with Amendments 1 and 2 Rihard Fenwik and Dene Cook Introdution NZS 3101: 2006 Conrete Strutures Standard is a design ode published by Standards New Zealand. Sine the
More informationd S1 HDA-P cut-out for setting /removal tool, turned through 90 l S
HDA - Dimensions HDA-T d S3 d S2 d S1 ut-out for setting / removal tool, turned through 90 d C l S d B AF l B HDA-P d S3 d S2 d S1 ut-out for setting /removal tool, turned through 90 d C l S d B AF l B
More informationPressure Vessels and Heat Exchangers
With Pressure Vessel and Heat Exhanger expertise in design evaluation, development of tehnial purhase speifiations, rerating, and repair analysis and high temperature vessel design, you d think we an do
More informationSAVANNAH TRIMS st STREET N., SUITE 4 LAKE PARK, FLORIDA
M.O. R.O. F.S. A.F.F. STL ALUM HORIZ VERT ELEV. N.T.S. G.. ARH. P.S.F. REQ'D TYP. ABBREVIATIONS MASONRY OPENING ROUGH OPENING FRAME SIZE DAYLIGHT OPENING ABOVE FINISHED FLOOR STEEL ALUMINUM HORIZONTAL
More informationPOLK ST. ADDRESS BELL ST. PEASE ST. DOWLING ST. LIVE OAK ST. NORTH
VIINITY MAP ( N.T.S.) ARHITETURAL SYMOLS DRAWING INDEX LASSIFIATION USINESS REQUIRED PARKING SPAES: 35 LASSIFIATION STORAGE REQUIRED PARKING SPAES: LASSIFIATION STORAGE PARKING SPAE ANALYSIS SETION 26-492
More informationARCHITECTURAL WALL PANELS APPLIED OVER A SHEATHED STUDWALL BY MEANS OF A FIELD ASSEMBLED TEN66 SUB-FRAME SYSTEM
SYSTEM TEN66 INSTALLATION DATA & DETAILS Omnis Panels, Inc. Architectural Building Panels 22 East Chicago Avenue Suite 210 Naperville, Illinois 60540 (800) 450-6099 (630) 355-4040 Fax: (630) 355-4995 www.omnis-panels.com
More informationBBR VT CONA CMI BT. Internal Post-tensioning System with 02 to 61 Strands. European Technical Assessment ETA 09/0286
BBR VT with 02 to 61 Strands European Tehnial Assessment ETA 09/0286 0432 ETA-09/0286 BBR VT with 02 to 61 Strands BBR VT International Ltd Ringstrasse 2, 8603 Shwerzenbah (Switzerland) www.bbrnetwork.om
More informationBBR VT CONA CMI SP. Internal Post-tensioning System with 01 to 61 Strands. European Technical Assessment ETA 09/0287
BBR VT with 01 to 61 Strands European Tehnial Assessment ETA 09/0287 0432 ETA-09/0287 BBR VT with 01 to 61 Strands BBR VT International Ltd Ringstrasse 2, 8603 Shwerzenbah (Switzerland) www.bbrnetwork.om
More informationZZINC Mechanical Anchors A2 INOX A4 INOX LHB Hold Down Bolt
10.0 Mehanial s 10.9 LHB Hold Down Bolt Produt Features Full strength is maintained Stress-free anhoring system Cast-in plaement eliminates the need for drilling an be tied into reinforing to distribute
More informationTEMPERATURE ADAPTIVE CONTROL USING THE ADDITIVE MANUFACTURING FOR INJECTION MOLDING POLYMERIC PRODUCTS
5 th International Conferene Advaned Composite Materials Engineering COMAT 2014 16-17 Otober 2014, Braşov, Romania TEMPERATURE ADAPTIVE CONTROL USING THE ADDITIVE MANUFACTURING FOR INJECTION MOLDING POLYMERIC
More informationStandard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units 1
Designation: D 5364 93 (Reapproved 2002) An Amerian National Standard Standard Guide for Design, Fariation, and Eretion of Fierglass Reinfored Plasti Chimney Liners with Coal-Fired Units 1 This standard
More informationMULTI-MAX Threaded stud zinc coated & stainless steel versions
Metharylate hemial resin for use in non-raked onrete d T inst d f APPLICATIO h ef = h 0 Fixing steel framed strutures Fixing mahinery (resistant to vibration) Fixing of storage silos, refinery pipework
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: PRODEMA USA INC. EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3439 Reissued 07/2018 This report is subject to renewal 07/2019. DIVISION: 07 00
More informationApprover: Corey Goulet, Director, Pipe Engineering Signature/Date (signed record on file)
C Title: TES-CP-CS Cathodi Protetion Constrution Speifiation Doument Type: Speifiation Effetive Date: 2001/12/15 Classifiation Code: DE01 Doument Owner: Engineering and Operation Servies (E & OS) Doument
More informationGROUND WATER/SURFACE WATER INTERACTIONS AWRA SUMMER SPECULLTP CONF~NCR CZ-I PDG- ANALYSIS OF INFILTRATED STREAM WATER TO A PUMPING WELL
JULY 1-3 GROUND WATER/SURFACE WATER NTERACTONS AWRA SUMMER SPECULLTP CONF~NCR 22 32 CZ- PDG- ANALYSS OF NFLTRATED STREAM WATER TO A PUMPNG WELL Xunhong Chen' and Xi Chen' ABSTRACT: Pumping of groundwater
More informationJob Aid. ESS - Create Entitlement Travel (Lump Sum Option)
ESS - Create Entitlement Travel (Lump Sum Option) Table of Contents Overview... 3 Objetives... 3 Enterprise Roles... 3 Create an Entitlement Travel Request with Lump Sum option... 4 General Data Page...
More informationThermal Systems KWC Ltd. Telephone: (403) Avenue N.E. Facsimile: (403)
PAGE 1 OF 7 1. GENERAL 1.1 SECTION INCLUDES.1 All requirements of the contract documents form an integral part of the work specified herein; in particular refer to the general conditions and Division 1
More informationShort Form. Return of Organization Exempt From Income Tax 0016
I-q S Form 99-EZ Short Form OMB No. 1545-115 Return of Organization Exempt From Inome Tax 16 Under setion 51(), 527, or 4947(a)(1) of the Internal Revenue Code (exept private foundations) F- C`am' UA Department
More informationLaboratory beating of pulp (valley beater method)
T 200 sp-96 TENTATIVE STANDARD 1930 OFFICIAL STANDARD 1932 TENTATIVE STANDARD 1960 OFFICIAL STANDARD 1970 OFFICIAL TEST METHOD 1985 REVISED 1989 STANDARD PRACTICE 1996 CORRECTED 1997 1997 TAPPI The information
More informationFormerly DE-STA-CO Cylinders 2293 Werth Road Alpena, Michigan Phone: (800) (WGB-CYLS) Fax: (866) (WGB-FAXS)
9 Werth Road Alpena, Michigan 49707 Phone: (800) 94-957 (WG-YLS) Fax: (866) 94-97 (WG-FAXS) Pre-Lubricated Pressures to 50 psi ylinders NFPA Industrial, Interchangeable uilt to Ford Standards, Effective
More informationDESIGN MANUAL FOR PURLIN AND CLADDING RAIL SYSTEMS
11198 Purlin Manual Cover.qxd:11198 Purlin Manual Cover.qxd 2/4/12 16:30 Page 1 DESIGN MANUAL FOR PURLIN AND CLADDING RAIL SYSTEMS AYRSHIRE METAL PRODUCTS (Daventry) Ltd. Royal Oak Way, Daventry, Northamptonshire
More informationMODELING FLEXIBLE PACKAGE/GRANULAR MATERIAL INTERATION THROUGH COMBINATION OF DISCRETE ELEMENT METHOD (DEM) AND FINITE ELEMENT METHOD (FEM)
MODELING FLEXIBLE PACKAGE/GRANULAR MATERIAL INTERATION THROUGH COMBINATION OF DISCRETE ELEMENT METHOD (DEM) AND FINITE ELEMENT METHOD (FEM) Wenbo Xu, Pavan Valavala, Mark Mirgon, Sam Crabtree, Lori Kardos,
More informationSteel. Members. in medium to. composite. provisions for. the available. b) strength of. design,
Chapter 13 Steel Conrete Composite Strutural Members 13.1 General Provisions for Steel Conrete Composite Strutural Members This setion states the sope of the speifiation, summarizess referened speifiations,
More informationMERRYPLACE HOMES TYPE 2 - ONE STORY
MERRYPLAE HOMES ODE SUMMARY ALL WORK TO ONFORM TO ALL APPLIABLE STATE, OUNTY AND LOAL ODES AND ORDINANES. INLUDING BUT NOT LIMITED TO: FLORIDA BUILDING ODE 2014 FLORIDA RESIDENTIAL ODE 2014 N.E.. 2011
More informationKE double wall transport anchors
for better solutions... KE double wall transport anhors The safe transport anhor for double walls KE Ttransport anhors - Transport double walls seurely www.h-bau.de Contat Oslo Helsinki Mosow London Warsaw
More informationTechnical Data. Neutral 20. Single Pane Tinted Double Pane Double tinted Neutral 1/4" Neutral Dual 1/4" Neutral Dual 1/4" Neutral.
20 (RE20NEARL) Redue air onditioning osts. Stay ooler by reduing exessive heat in warmer months. Redues glare and eye disomfort. Extend the life and vibrany in the fabri of furniture and arpets. Redues
More informationCREATING VALUE THROUGH INNOVATION, EXPERIENCE AND RELIABILITY
CREATING VALUE THROUGH INNOVATION, EXPERIENCE AND RELIABILITY ABOUT TRESPA Innovation is the foundation of our approach and it will continue to be the foundation of our future. André Horbach, CEO, Trespa
More informationDesert Willow Elementary School Roof Replacement North 7 th Avenue, Suite 101 Phoenix, Arizona 85013
ADDENDUM: Number 0 October 9, 0 TO: LIENT: PROJET: SITE: ARHITET: Interested Bidders ave reek Unified School District ave reek, Arizona Desert Willow Elementary School Roof Replacement Desert Willow Elementary
More informationRainwater Management Performance of Newly Constructed Residential Building Enclosures During August and September 2004
Rainwater Management Performane of Newly Construted Residential Building Enlosures During August and September 2004 Prepared for the Home Builders Assoiation of Metro Orlando and the Florida Home Builders
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FIBER-CEMENT SIDING REPORT HOLDER: TAKTL, LLC
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3899 Issued 04/2018 This report is subject to renewal 04/2019. DIVISION: 07 00 00
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following exerpt are pages from the North Amerian Produt Tehnial Guide, Volume 2: Anhor Fastening, Edition 16.1. Please refer to the publiation in its entirety for omplete details on this produt inluding
More informationA flush collector beam end plate is used to allow for the placement of the floor deck on top of the collector beam.
EARTHQUAKE Eentrially Braed Frames with Removable Links Design Methodology Author: Kevin Cowie a, Alistair Fussell a, Martin Wong a, Charles Clifton b, Dmitry Volynkin b Affiliation: a. Steel Constrution
More informationWASHINGTON STATE ENERGY OFFICE
std Washington State WSEC energy ode, 1983 hapter 51-12 WAC, 1983. LIBRARY WASHINGTON STATE ENERGY OFFICE 9?5 PLUM ST. SE. BLDG. 4 POBOX431b9 OLYMPIAWA 98504-3169 WAOENG-84-02 WASHINGTON STATE ENERGY CODE
More informationNumerical Modeling and Experimental Investigation of the Failure Modes of the Cellular Foam Sandwich Structures
Journal of Metals, Materials and Minerals, Vol.18 No.2 pp.111-115, 2008 Numerial Modeling and Experimental Investigation of the Failure Modes of the Cellular Foam Sandwih Strutures Jörg FELDHUSEN 1, Sirihai
More informationCofra. CDC compaction. Cofra. Building worldwide on our strength
C Building worldwide on our strength Due to the inreased sale of dredging equipment, dredged material is often deposited on sites at a muh greater rate than was the ase 10 years ago. As a result, there
More informationMERCHANT SHIPPING (OFFICIAL LOG BOOK AND LIST OF CREW) REGULATIONS
Merhant Shipping (Offiial Log Book and List of Crew) Regulation 1 MERCHANT SHIPPING (OFFICIAL LOG BOOK AND LIST OF CREW) REGULATIONS 2015 Index Regulation Page PART 1 INTRODUCTORY 2 1 Title... 2 2 Commenement...
More informationA veneer anchoring system that helps keep the air barrier intact and the veneer in place
Veneer Anchor System for Optimum Air Barrier Integrity AGAIN! ANOTHER TP SOLUTION! TP-16 A veneer anchoring system that helps keep the air barrier intact and the veneer in place For anchored veneers, the
More informationLouvre. Exterior Facade. Balcony GO GREEN!! NEW EDGE HPL FACADE
R Exterior Facade Main Gate Louvre Boundary Wall Balcony Canopy GO GREEN!! NEW EDGE HPL FACADE Product Information Acrylic PUR resin (weather protection) Plain Colour or Printed Colour R-Core Reznoclad
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount DESIGN SUPPORT TOOLS Models click logo to get started FEATURES Molded construction for total environmental protection omplete welded
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 Available in non-inductive
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: KINGSPAN INSULATED PANELS, INC.
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1143 Reissued 04/2017 This report is subject to renewal 04/2018. DIVISION: 07 00 00 THERMAL
More informationDurability of bitumen mat used for increasing friction between concrete caisson and rock mound
Duraility of itumen mat used for inreasing frition etween onrete aisson and rok mound Masakazu Mayama Hokkaido Institute of Tehnology, Sapporo, Japan Tadahiro Imoto Civil Engineering Researh Institute
More information2. Submit numbered and fully labeled mapddrawings to show the following:
Mr. Padrai Fay Consultant Mr James MGuirk C/o CLW Environmental Planners Ltd The Mews 3 Farnham Street Cavan Regional Inspetorate MCumiskey House, Rihview, Clonskeagh Road, Dublin 14, Ireland Cigireaht
More informationHIGH PRESSURE LAMINATE CLADDING PANELS SPECIFICATION V1.0
HIGH PRESSURE LAMINATE CLADDING PANELS SPECIFICATION V1.0 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Exterior High Pressure Laminate cladding panel system and accessories as required, for a complete drained
More informationSECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 08 51 69.11 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationINTERLOCKING PANELS by ARCHTECH
INTERLOCKING PANELS by ARCHTECH INTRODUCTION The panels are simply connected by the use of an interlocking groove, giving the elegant appearance of a recessed joint. Interlocking Panels does not require
More informationPost-Tensioned Two-Way Slab
The Medial Oie Building Malvern, PA 13 Post-Tensioned Two-Way Slab Introdution The Filigree beam system reates a thin lightweight loor system that leaves plenty o open plenum spae or mehanial and eletrial
More informationLOW FREQUENCY BUCKETS FOR INDUSTRIAL STEAM TURBINES by
LOW FREQUENCY BUCKETS FOR INDUSTRIAL STEAM TURBINES by Firm L. Weaver Engineering Consultant Sun City Center, Florida Firm L. Weaver graduated from Roanoke Coll ege, in Salem, Virginia, with a B.S. degree
More informationPROPOSAL OF A STANDARD FOR SEISMIC DESIGN OF CONFINED MASONRY BUILDINGS
Institute of Industrial Siene, University of Tokyo Bulletin of ERS, No. 37 PROPOSAL OF A STANDARD FOR SEISMIC DESIGN OF CONFINED MASONRY BUILDINGS Angel SAN BARTOLOME 1, Daniel QUIUN 1 and Paola MAYORCA
More informationTRESPA WALL CLADDING SYSTEMS SYSTEM 700 ALUMINIUM SUB-FRAME SYSTEM
Trespa International B.V. P O Box 110 6000 AC Weert The Netherlands Tel: 00 31 0495 458358 Fax: 00 31 0495 458570 e-mail: infonederland@trespa.com website: www.trespa.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationMulti-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 074200 HIGH PRESSURE COMPACT LAMINATE (HPL) WALL PANELS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Exterior high pressure compact laminate cladding panel system and accessories as required for a
More information. Short Form OMB No
^. Short Form OMB. 1545-1150 Form 990-EZ Return of Organization Exempt From Inome Tax 2@16 Under setion 501 (), 527, or 4947(a)(1) of the Internal Revenue Code (exept private foundations) 1v2 ^SZ Uv Do
More informationProposal for a new shear design method
Chapter 6 Proposal for a new shear design method The behaviour of beams failing in shear has been studied in the previous hapters, with speial attention paid to high-strength onrete beams. Some aspets
More informationKNIGHT WALL SYSTEMS GUIDE DETAILS:
KNIGHT WALL SYSTEMS GUIDE DETAILS: HCI System RAINSCREEN ATTACHEMNT HORIZONTAL ORIENTED GIRT VERTICAL PanelRail & RevealRail SYSTEM DEPTH: 1.5 INCHES (FACE OF RIGID INSULATION TO FACE OF RAIL) QUICK LINK:
More informationHenley Business School at Univ of Reading. Chartered Institute of Personnel and Development (CIPD)
MS in International Human Resoure Management (full-time) For students entering in 2013/4 Awarding Institution: Teahing Institution: Relevant QAA subjet Benhmarking group(s): Faulty: Programme length: Date
More information