SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone:
|
|
|
- Pearl Edwards
- 5 years ago
- Views:
Transcription
1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone: Valid to: July 31, 2018 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory for: CONSTRUCTION MATERIALS ENGINEERING ASTM: C1077 (Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation); D3666 (Agencies Testing and Inspecting Road and Paving Materials); D3740 (Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction); E329 (Agencies Engaged in Construction Inspection, Testing or Special Inspection); E543 (Agencies Performing Nondestructive Testing) CONSTRUCTION MATERIALS TESTING Test Method: Aggregates: ASTM C29 ASTM C40 ASTM C70 ASTM C117 ASTM C127 ASTM C128 ASTM C136/C136M ASTM C142 ASTM C566 ASTM C702 (Methods B & C) ASTM D75 1 Tex-200-F Tex-201-F Tex-400-A 1 Tex-401-A Tex-402-A Tex-403-A Tex-406-A Bulk Density ( Unit Weight ) and Voids in Aggregate Organic Impurities in Fine Aggregates for Concrete Surface Moisture in Fine Aggregate Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate Sieve Analysis of Fine and Coarse Aggregates Clay Lumps and Friable Particles in Aggregates Total Evaporable Moisture Content of Aggregate by Drying Reducing Samples of Aggregate to Testing Size Sampling Aggregates Sieve Analysis of Fine and Coarse Aggregates Bulk Specific Gravity and Water Absorption of Aggregate Sampling Flexible Base, Stone, Gravel, Sand, and Mineral Aggregates Sieve Analysis of Fine and Coarse Aggregate Fineness Modulus of Fine Aggregate Saturated Surface-Dry Specific Gravity and Absorption of Aggregates Material Finer Than 75 µm (No. 200) Sieve in Mineral Aggregates (Decantation Test For Concrete Aggregates) (A2LA Cert. No ) Revised 06/25/2018 Page 1 of 4
2 Bituminous: ASTM D5 ASTM D75 1 ASTM D546 ASTM D979 1 ASTM D1560 ASTM D1856 ASTM D2041/D2041M ASTM D2171/D2171M ASTM D2172 (Method A) ASTM D2726 ASTM D ASTM D ASTM D3665 ASTM D4013 ASTM D ASTM D5444 AASHTO T209 Tex-205-F Tex-206-F (Part 1) Tex-207-F Tex-208-F Tex-210-F Tex-211-F Tex-227-F Tex-236-F Concrete: ASTM C31/C31M 1 ASTM C39/C39M ASTM C42/C42M ASTM C78/C78M 1 ASTM C138/C138M 1 ASTM C143/C143M 1 ASTM C172/C172M 1 ASTM C173 1 ASTM C174/C174M ASTM C192/C192M ASTM C231/C231M 1 Penetration of Bituminous Materials Sampling Aggregates Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures Sampling Bituminous Paving Mixtures Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus Recovery of Asphalt From Solution by Abson Method Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures Viscosity of Asphalts by Vacuum Capillary Viscometer Quantitative Extraction of Bitumen From Bituminous Paving Mixtures Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures Density of Bituminous Concrete in Place by Nuclear Methods Thickness or Height of Compacted Bituminous Paving Mixture Specimens Random Sampling of Construction Materials Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor Sampling Compacted Bituminous Mixtures for Laboratory Testing Mechanical Size Analysis of Extracted Aggregate Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA) Laboratory Method of Mixing Bituminous Mixtures Compacting Specimens Using the Texas Gyratory Compactor (TGC) Determining Density of Compacted Bituminous Mixtures Test for Stabilometer Value of Bituminous Mixtures Determining Asphalt Content of Bituminous Mixtures by Extraction Recovery of Asphalt from Bituminous Mixtures by the Abson Process Theoretical Maximum Specific Gravity of Bituminous Mixtures Determining Asphalt Content from Asphalt Paving Mixtures by the Ignition Method Making and Curing Concrete Test Specimens in the Field Compressive Strength of Cylindrical Concrete Specimens Obtaining and Testing Drilled Cores and Sawed Beams of Concrete Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete Slump of Hydraulic-Cement Concrete Sampling Freshly Mixed Concrete Air Content of Freshly Mixed Concrete by the Volumetric Method Measuring Thickness of Concrete Elements Using Drilled Concrete Cores Making and Curing Concrete Test Specimens in the Laboratory Air Content of Freshly Mixed Concrete by the Pressure Method (A2LA Cert. No ) Revised 06/25/2018 Page 2 of 4
3 Concrete (cont.): ASTM C293/C293M ASTM C495 ASTM C567/C567M 1 ASTM C617/C617M ASTM C642 ASTM C823/C823M 1 ASTM C1040/C1041M ASTM C1064/C1064M 1 ASTM C1140 ASTM C1231/C1231M ASTM E1155 AASHTO T23 Tex-414-A 1 Tex-415-A 1 Tex-416-A 1 Tex-417-A 1 Tex-418-A Tex-422-A Tex-424-A Tex-447-A 1 Tex-448-A Tex-450-A Fireproofing 1 : ASTM E605 ASTM E736 Masonry: ASTM C109/C109M (Compressive Strength Only) ASTM C780 1 (Annex 6 Only) Soils: ASTM D421 ASTM D422 ASTM D558 ASTM D559/D559M ASTM D698 ASTM D854 ASTM D1140 ASTM D1556/D1556M 1 ASTM D1557 ASTM D1633 ASTM D1883 Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading) Compressive Strength of Lightweight Insulating Concrete Determining Density of Structural Lightweight Concrete Capping Cylindrical Concrete Specimens Density, Absorption, and Voids in Hardened Concrete Examination and Sampling of Hardened Concrete in Constructions In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, by Nuclear Methods Temperature of Freshly Mixed Hydraulic-Cement Concrete Preparing and Testing Specimens from Shotcrete Test Panels Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders Determining F F Floor Flatness and F L Floor Levelness Making and Curing Concrete Test Specimens in the Field Air Content of Freshly Mixed Concrete by the Volumetric Method Slump of Hydraulic Cement Concrete Air Content of Freshly Mixed Concrete by the Pressure Method Unit Weight, Yield, and Air Content (Gravimetric) of Concrete Compressive Strength of Cylindrical Concrete Specimens Measuring Temperature of Freshly Mixed Portland Cement Concrete Obtaining and Testing Drilled Cores of Concrete Making and Curing Concrete Test Specimens Flexural Strength of Concrete Using Simple Beam Third-Point Loading Capping Cylindrical Concrete Specimens Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members Compressive Strength of Hydraulic Cement Mortars (Using 2 in. or [50 mm] Cube Specimens) Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants Particle-Size Analysis of Soils Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures Wetting and Drying Compacted Soil-Cement Mixtures Laboratory Compaction Characteristics of Soil Using Standard Effort Specific Gravity of Soil Solids by Water Pycnometer Amount of Material in Soils Finer than No. 200 (75 μm) Sieve Density and Unit Weight of Soil in Place by Sand-Cone Method Laboratory Compaction Characteristics of Soil Using Modified Effort Compressive Strength of Molded Soil-Cement Cylinders CBR (California Bearing Ratio) of Laboratory-Compacted Soils (A2LA Cert. No ) Revised 06/25/2018 Page 3 of 4
4 Soils (cont.): ASTM D2216 ASTM D2487 ASTM D ASTM D ASTM D3282 ASTM D4318 ASTM D4643 ASTM D4647 ASTM D4718 ASTM D4959 ASTM D AASHTO T89 AASHTO T90 Tex-113-E Tex-120-E Tex-121-E Steel (Shop & Field) 1 : AWS D1.1 Clause 6 Inspection, D1.3 Clause 6, Part 1 Inspection, D1.4 Clause Inspection AISC Section 16.1, N5, 6/RCSC Section 9 Inspection Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass Classification of Soils for Engineering Purposes (Unified Soil Classification System) Description and Identification of Soils (Visual-Manual Procedure) Density of Soil in Place by the Drive-Cylinder Method Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes Liquid Limit, Plastic Limit, and Plasticity Index of Soils Determination of Water (Moisture) Content of Soil by Microwave Oven Heating Identification and Classification of Dispersive Clay Soils by the Pinhole Test Unit Weight and Water Content for Soils Containing Oversize Particles Determination of Water (Moisture) Content of Soil by Direct Heating In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) Determining the Liquid Limit of Soils Determining the Plastic Limit and Plasticity Index of Soils Laboratory Compaction Characteristics and Moisture-Density Relationship of Base Materials Soil-Cement Testing Soil-Lime Testing Fabrication & Erection Visual Welding Manual of Steel Construction (Fabrication & Erection Visual & Bolting) Nondestructive (Laboratory & Field) 1 : ASTM E94 Radiographic Examination ASTM E164 Standard Practice for Contact Ultrasonic Testing of Weldments ASTM E165/E165M Standard Practice for Liquid Penetrant Examination for General Industry ASTM E709 Magnetic Particle Testing 1 This laboratory meets A2LA R104 General Requirements: Accreditation of Field Testing and Field Calibration Laboratories for these tests or calibrations. (A2LA Cert. No ) Revised 06/25/2018 Page 4 of 4
5 Accredited Laboratory A2LA has accredited QC LABORATORIES, INC. Houston, TX for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 15 th day of July 2016 President and CEO For the Accreditation Council Certificate Number Valid to July 31, 2018 Revised June 25, 2018 For the tests to which this accreditation applies, please refer to the laboratory s Construction Materials Scope of Accreditation.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. HTS, INC. CONSULTANTS 416 Pickering Houston, TX Terry J. Jackson, P.E. Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HTS, INC. CONSULTANTS 416 Pickering Houston, TX 77206 Terry J. Jackson, P.E. Phone: 713 692 8373 Valid To: October 31, 2018 Certificate Number: 0029.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEOTECH ENGINEERING AND TESTING, INC. 17407 Highway 59 North Humble, TX 77396 Andrie Fruel, P.E. Phone: 713 699 4000 Valid To: December 31, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA Jeff Roberts Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA 50309 Jeff Roberts Phone: 515 282 8818 Valid To: April 30, 2019 Certificate Number: 0576.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CARLSON TESTING, INC Hudson Avenue, NE Salem, OR James Hathaway, PE Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARLSON TESTING, INC. 4060 Hudson Avenue, NE Salem, OR 97301 James Hathaway, PE Phone: 503 589 1252 Valid To: January 31, 2020 Certificate Number: 0258.03 In
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 N Cutter Circle, Suite #480 Portland, OR 97217 Joseph A. Morrissey, PE Phone: 503 289 1778
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. 3011 South Huson Street, Suite A Tacoma, WA 98409 Eric Allen Phone: 253 589 1804 Valid To: December 31, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OTTO ROSENAU & ASSOCIATES, INC. 6747 Martin Luther King Jr. Way S. Seattle, WA 98118 Judi Rosenau-Payseno Phone: 206 725 4600 Valid To: February 28, 2019 Certificate
Accredited Laboratory
Accredited Laboratory A2LA has accredited (FORMERLY KNOWN AS GORRONDONA & ASSOCIATES, INC.) Houston, TX for technical competence in the field of Geotechnical Testing This laboratory is accredited in accordance
Accredited Laboratory
Accredited Laboratory A2LA has accredited Houston, TX for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized International
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TOLUNAY-WONG ENGINEERS, INC 10710 Sam Houston Parkway West, Suite 100 Houston, TX 77031 Patricia Hodgkins Phone: 504 202 7541 Valid To: February 29, 2020 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHWEST GEOTECH, INC. d/b/a NORTHWEST TESTING, INC. 9120 SW Pioneer Court, Suite B Wilsonville, OR 97070 Thomas Ginsbach, P.E. Phone: 503 682 1880 Valid To:
IAS Accreditation Number Materials Testing and Inspection 2791 South Victory View Way Boise, Idaho 83709
IAS Accreditation Number Company Name Inspection Address 2791 South Victory View Way Boise, Idaho 83709 Contact Name Elizabeth Brown, P.E. Corporate Quality Manager Telephone (208) 376-4748 Effective Date
Terracon Consultants, Inc.
in College Station, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
IAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531
IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA 98531 Contact Name Tim A. Barney, President Telephone (360) 736-3922 Effective Date of Scope November 30, 2017
Flood Testing Laboratories, Inc.
in Chicago, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
PAVETEX Engineering, LLC
in El Paso, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Standard Testing & Engineering, LLC
Standard Testing & Engineering, LLC dba Standard Testing & Engineering Company in Oklahoma City, Oklahoma, USA has demonstrated proficiency for the testing of construction materials and has conformed to
Accredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
STRATA Certified Laboratory Tests
STRATA Certified Laboratory Tests Table 1. List of Certified Soil Tests 1 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2 ASTM D 698-12 Standard Test Method for Compaction Characteristics
FHWA-Central Federal Lands Highway Division
in Denver, Colorado, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Seattle Public Utilities Materials Laboratory
in Seattle, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
United-Heider Inspection Group Goldencrest Drive, Suite 114, Moreno Valley, CA 92553, USA Martin Lowenthal, General Manager
IAS Accreditation Number Company Name Address Contact Name Telephone +1 (951) 697-4777 Effective Date of Scope August 28, 2017 Accreditation Standard ISO/IEC 17025:2005 CMT TL-699 22620 Goldencrest Drive,
LABORATORY INSPECTION INFORMATION REQUEST
LABORATORY INSPECTION INFORMATION REQUEST This information will assist in the processing of laboratory inspections. The inspection is a two-man day comprehensive review that includes review of the quality
Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.
CODES & STANDARDS FOR ON-SITE TESTING LABORATORY Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner. Codes & Standards are published
Laboratory Certification For. Build Afghanistan Engineering Services (BAES) Laboratory
Laboratory Certification For Build Afghanistan Engineering Services (BAES) Laboratory Lab ID: LCP-017 Issue date: Oct 5, 2016 Expiry date: April 4, 2017 This Extension letter confirms the completion of
Laboratory Certification For. Reno Geotech & Construction Material Testing Company
Laboratory Certification For Reno Geotech & Construction Material Testing Company Lab ID: LCP-011 Issue date: June 10 th, 2018 Expiry date: Dec 9 th, 2018 This letter confirms the completion of inspection
2501 PART V SECTION 2501 PART V
SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable procedures as outlined in the KDOT Construction Manual, Part V. This includes, but is not limited
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
Laboratory Certification For. National Engineering Services for Rehabilitation of Afghanistan (NESRA)
Laboratory Certification For National Engineering Services for Rehabilitation of Afghanistan (NESRA) Lab ID: LCP-004 Issue date: Feb 15 th, 2018 Expiry date: Aug 14 th, 2018 This extension letter confirms
Pennoni Associates, Inc.
in Bethlehem, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
GeoTesting Express, Inc.
in Acton, Massachusetts, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
AESCO, Inc. Huntington Beach, California, USA
in Huntington Beach, California, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
Laboratory Certification For. Delta Afghan Technical Engineering Services (DATES)
Laboratory Certification For Delta Afghan Technical Engineering Services (DATES) Lab ID: LCP-026 Issue date: Jan 6 th, 2019 Expiry date: July 5 th, 2019 This letter confirms the completion of inspection
FHWA-Western Federal Lands Highway Division
in Vancouver, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Wiss, Janney, Elstner Associates, Inc.
in Northbrook, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
From: Samaniego, Eric E@DOT Date: Tue, Jul 1, 2014 at 8:38 AM Subject: FW: FW: City of Los Angeles 2014 QAP To: "ray.solomon@lacity.org" Cc: "Kumar,
CTL Engineering of Indiana, Inc.
in Indianapolis, Indiana, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
PRI Asphalt Technologies, Inc.
in Tampa, Florida, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Method of Test For In-Place Density of Treated and Untreated Soils and Aggregates
Rev. 04-12-17 Aggregates and Soils T102H T103G T104D T106B T107B T108C T111D T112F T115D T116A T200E T203G T206G T209C T210J T211J& T212J T224C T227I T228C T230D T235B Method of Test For In-Place Density
Oklahoma DOT Central Laboratory Test List
Aggregate Count of Tests: 21 Aggregate Durability Index 00091 T210 AR Bulk Density and Voids 00086 T19 AR Clay Lumps and Friable Particles 00080 T112 AR OHDL9-OHDL38 Dust Coating of Cover Aggregates 00149
Beyond Engineering & Testing, LLC.
in Round Rock, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Nelson Testing Laboratories
in Elmhurst, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
Standard test method for organic impurities in fine aggregates for concrete. Standard test method for chemical analysis of hydraulic cement
IAS Accreditation Number TL-454 Company Name (QEL)- Foreign Branch Address Shed-9, Building-2189, Road-1529, Block 115 P.O. Box 50191 Hidd Kingdom of Bahrain Contact Name Sreekala Prabasankar, Technical
QUALITY ASSURANCE PROGRAM
QUALITY ASSURANCE PROGRAM FOR CONSTRUCTION and CITY OF LAREDO JUNE 2005 2005 by Texas Department of Transportation (512) 506-5803 All Rights Reserved TABLE OF CONTENTS SECTION 1 - INTRODUCTION... 3 1.1
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355 REPLY TO ATTENTION OF USACE-EC-TSB 1 June 2013 (Expiration: 2 June 2015) 2013 INSPECTION AND CERTIFICATION
Index FM 5-472/NAVFAC MO 330/AFJMAN (I)
RETURN TO TOC FM 5-472/NAVFAC MO 330/AFJMAN 32-1221(I) Index A accelerators, 4-7 additive, 5-1, 5-2, 5-5, 5-6 admixtures, 4-2, 4-3, 4-7, 4-8, 4-9, 4-20 adsorption, 2-6, 2-7 aerial photographs, 2-28, 2-30,
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Prime Parkway Contact: Mr M Barham Prime Enterprise Park Tel: +44 (0)1332 383333 Derby Fax: +44 (0)1332 602607 DE1 3QB E-Mail: mike.barham@kiwa.co.uk
Standard Test Method for Bulk Density ( Unit Weight ) and Voids in Aggregate
IAS Accreditation Number Company Name Address TL-292 401 E. Fourth St., Bldg. 12B Bridgeport, PA 19405 Thomas Smith, Laboratory Manager Contact Name Telephone +1 (610) 313-3227 Effective Date of Scope
Discipline Mechanical Testing Issue Date Certificate Number T-1169 Valid Until Last Amended on
Last Amended on 08.06.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Reinforcing Bar Nominal mass of HSD rebar IS 1786: 2008 (RA 2013) 0.075 kg/m to 15 kg/m Tensile Test of HSD rebar 2. Strands
Classroom Instructors: Mitch Forst (MF), Larry Shively (LS), Cliff Ursich (CU), Dave Powers (DP).
FLEXIBLE PAVEMENTS OF OHIO 2015 COMPREHENSIVE ASPHALT MIX DESIGN SCHOOL February 9-13, 2015 Columbus, Ohio ODOT Office of Materials Management, 1600 W. Broad St. Classroom Instructors: Mitch Forst (MF),
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4 PROFESSIONAL SERVICES Principal Engineer / Geologist $160.00 per hour Senior Engineer / Geologist $160.00 per hour Senior Environmental Scientist
APPENDIX A. Agency Application and Audit Checklists
APPENDIX A Agency Application and Audit Checklists 1. Instructions to the Agency 2. Agency Application Review Checklist 3. Agency Audit Checklist 4. Summary of Assessment Report 5. Assessor s Recommendation
LIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR PLANT MIX BITUMINOUS BASES AND SURFACES
708-3(a-g) 99 OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR PLANT MIX BITUMINOUS BASES AND SURFACES These Special Provisions revise, amend and where in conflict, supersede applicable sections
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
chedule of Accreditation 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK 5 Churchill Place Canary Wharf London E14 5HU Contact: Mr G P Booker Tel: +44 (0)20 38102416 Fax: +44 (0)20 7216 6950
SECTION TESTING LABORATORY SERVICES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 01 45 29 1. Use this section only for NCA projects. 2. Delete between // -- // if not applicable to project. Also delete any other item or paragraph not applicable
Publications Transmittal
Publications Transmittal Transmittal Number PT 11-006 Publication Title / Publication Number Materials Manual M 46-01.07 Date Originating Organization Materials Laboratory through Administrative and Engineering
GENERAL EQUIPMENT. 3 Electronic analytical balance (320gr capacity - 0,001gr readability)
1. Laboratory Equipment Every laboratory equipment has its own calibration certificate and is operatedmaintained according to its manual guide. The equipment of the laboratory is listed below. The laboratory
A. Texas Department of Transportation 2004 Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (TxDOT).
SECTION 32 12 16 ASPHALT CONCRETE PAVING PART 1 GENERAL 1.1 SCOPE OF WORK A. This Section specifies the requirements for placing a hot laid plant mix asphalt surface course upon either an asphalt stabilized
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Annex to declaration accreditation (scope accreditation) Location(s) where activities are performed under accreditation Head Office Vlamoven 41 6826 TM Arnhem The Netherlands Location Abbreviation/ location
Action Recommendation: Budget Impact:
City of Fayetteville Staff Review Form Matt Casey 1/30/2019 ENGINEERING (621) Submitted By 2019 0086 Legistar File ID 2/19/2019 City Council Meeting Date Agenda Item Only N/A for Non Agenda Item Submitted
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
This annex is valid from: 16-08-2017 to 01-08-2020 Replaces annex dated: 23-05-2016 Vlamoven 41 6826 TM Arnhem The Netherlands Location(s) where activities are performed under accreditation Head Office
Section CEMENT STABILIZED SAND
PART 1 GENERAL 1.01 SECTION INCLUDES Cement stabilized sand material. 1.02 MEASUREMENT AND PAYMENT A. Unit Prices. Section 02321 1. No separate payment will be made for Work performed under this Section.
Radhey Testing & Consultants Pvt. Ltd., B-363, Kalindi Vihar, Agra, Uttar Pradesh. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 10 I. BUILDING MATERIALS 1. Aggregates (Coarse & Fine) Sieve Analysis IS 2386 (Part 1) 1963 (RA 2002) 4.75 mm to 100 mm 0.150 to 4.75 Specific Gravity IS 2386 (Part 3) 1963
Tex-204-F, Design of Bituminous Mixtures
Overview Effective: August 1999 August 2000. Use this procedure to determine the proper proportions of approved aggregates and asphalt which, when combined, will produce a mixture that will satisfy the
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Geotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
PROGRAMME OF WORK : STANDARDS
Report : 09-0- Of 7 08 08/SC 0 470 (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes 08-08-0 508.0 Concrete retaining blocks 08-08-0 54 (SABS 54) 4.0 Concrete roofing tiles 08-08-0
Special Provision No. 199S64 July 2016
GENERAL REQUIREMENTS FOR REFEREE TESTING Special Provision No. 199S64 July 2016 1.0 Scope This Special Provision describes the common requirements for referee testing related to laboratory and field testing
Foreword... iii Table of Contents...v List of Figures...vii List of Tables...viii. Chapter 1 : Background...1
Foreword... iii Table of Contents...v List of Figures...vii List of Tables...viii Chapter 1 : Background...1 Introduction...1 Asphalt Mixtures... 2 Asphalt Binder Behavior... 2 Mineral Aggregate Behavior...
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002)
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002) Standards and Specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations.
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
ASPHALT BINDER AND EMULSIONS
AASHTO Accreditation Policy on PSP Participation How to use these tables: Each test that is included in a PSP will be designated with a T. If there is a special rule for participation that is other than
ASPHALT BINDER AND EMULSIONS
AASHTO Accreditation Policy on PSP Participation How to use these tables: Each test that is included in a PSP will be designated with a T. If there is a special rule for participation that is other than
Chapter 6 Tex-204-F, Design of Bituminous Mixtures
Chapter 6 Tex-204-F, Design of Bituminous Contents: Section 1 Overview... 6-3 Section 2 Automated Mix Design Report Format... 6-4 Section 3 Procedure... 6-5 Section 4 Part I, Typical Example of Design
Mr. Jody Wall Carolina Stalite P.O. Box 186 Phone: (704)
March 19, 2015 Mr. Jody Wall Carolina Stalite P.O. Box 186 Phone: (704) 279-8614 Gold Hill, North Carolina 28071 Email: jwall@stalite.com Subject: Interim Report of ASTM C330 Dear Mr. Wall: Testing, Engineering
Reinstated KT-61: Raveling Test on Recycled Asphalt Specimens. Added KT-82: Determination of Excessive Moisture in Concrete Surfaces
s to the 2014 version of Part V of the Construction Manual This document is intended as a guide to the changes that occurred between the 2014 to the 2015 versions of Part V of the Kansas Department of
32.02 RESPONSIBILITIES OF THE TESTING AGENCY
32.2 RESPONSIBILITIES OF THE TESTING AGENCY 32.2.1 General All materials and operations shall be tested in accordance with these Specifications and as directed by the Project Manager. Agencies testing
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service ccredited to Highways sset Planning Group Materials uilding G Merrow Lane Guildford Surrey GU4 7Q Contact: Mr J Tanzilli Tel: +44 (0)1483 517
QUALITY CONTROL PROGRAM FOR PRECAST CONCRETE PRODUCTS SECTION 1902 QUALITY CONTROL PROGRAM FOR PRECAST CONCRETE PRODUCTS
SECTION 1902 QUALITY CONTROL PROGRAM FOR PRECAST CONCRETE PRODUCTS 1902.1 DESCRIPTION This specification covers precast concrete pipe, end sections, inlets, manholes, boxes, and related concrete accessories.
JAZAN UNIVERSITY. CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory
JAZAN UNIVERSITY College of Engineering CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory The Equipment The Purpose To determination of compressive strength of samples Bricks,
Standard test method for compressive strength of cylindrical concrete specimens. Standard test method for flexural strength of hydrauliccement
IAS Accreditation Number Company Name Address TL-228 Specialized Testing, Inc. 10600 Pioneer Boulevard, Suite G Santa Fe Springs, California 90670 Martin Mejia, Technical Manager Contact Name Telephone
Publications Transmittal
Publications Transmittal Transmittal Number PT 17-032 Publication Title / Publication Number Materials Manual M 46-01.28 Originating Organization Materials Laboratory, Engineering and Regional Operations
Standards on TRANSPORTATION APPLICATION Stock #: TRANS04 T A B L E O F C O N T E N T S
Standards on TRANSPORTATION APPLICATION Stock #: TRANS04 T A B L E O F C O N T E N T S VOLUME 1 C 14-03 C 29/C 29M-97 (2003) C 31/C 31M-03a C 32-04 C 33-03 C 39/C 39M-04 C 40-04 C 42/C 42M-04 C 43-03a
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES A division of the National Society of Professional Engineers
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES A division of the National Society of Professional Engineers Transportation Engineering Technology HIGHWAY MATERIALS PROGRAM DETAIL MANUAL