Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.
|
|
- Brandon Ethelbert Lynch
- 5 years ago
- Views:
Transcription
1 CODES & STANDARDS FOR ON-SITE TESTING LABORATORY Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner. Codes & Standards are published documents that establish specifications and procedures designed to ensure the reliability of the materials, products, methods, and/or services use in construction industry. These Codes & Standards also make it easier to understand and compare competing products. AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM): ASTM C29/C29M : Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate. ASTM C33 : Standard Specification for Concrete Aggregates. ASTM C31/C31 M : Standard Practice for Making and Curing Concrete Test Specimens In the Field ASTM C40 : Standard Test Method for Organic Impurities in Fine Aggregates for Concrete ASTM C88 : Standard Test Method for Soundness of Aggregates by Use of Sodium Sulphate or Magnesium Sulphate ASTM C109/C109 M : Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2 Inch or 50 mm Cube Specimens) ASTM C117 : Standard Test Method for Materials Finer than 75 Micrometer (No. 200) Sieve in Mineral Aggregates by Washing ASTM C127 : Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate. ASTM C128 : Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate. ASTM C131 : Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine ASTM C136 : Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates ASTM C142 : Standard Test Method for Clay Lumps and Friable Particles in Aggregates ASTMC143/C143 M. : Standard Test Method for Slump of Hydraulic Cement Concrete ASTMC172/C172 M. : Standard Practice for Sampling Freshly Mixed Concrete ASTM C188 : Standard Test Method for Density of Hydraulic Cement ASTM C192/C192 M : Standard Practice for Making and Curing Concrete Test Specimens in
2 the Laboratory ASTM C227 : Standard Test Method for Potential Alkali Reactivity of Cement- Aggregate Combinations (Mortar-Bar Method) ASTM C289 : Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method) ASTM C457/C457M : Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete ASTM C494/C494M : Standard Specification for Chemical Admixtures for Concrete ASTM C535 : Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in Los Angeles Machine ASTM C 579 : Standard Test Methods for Compressive Strength of Chemical- Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes. ASTM C642 : Standard Test Method for Density, Absorption, and Voids in Hardened Concrete ASTM C823/C823M : Standard Practice for Examination and Sampling of Hardened Concrete in Constructions ASTM C856 : Standard Practice for Petrographic Examination of Hardened Concrete ASTM C1064/C1064M : Standard Test Method for Temperature of Freshly Mixed Hydraulic - Cement Concrete ASTM C1077 : Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation ASTMC1152/C1152M : Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete ASTM C1202 : Standard Test Method for Electrical Indication of Concrete s Ability to Resist Chloride Ion Penetration ASTMC1218/C1218M : Standard Test Method for Water-Soluble Chloride in Mortar and Concrete ASTM C1260 : Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method). ASTM D75 : Standard Practice for Sampling Aggregates ASTM D512 : Standard Test Method for Chloride Ion in Water ASTM D516 : Standard Test Method for Sulfate Ion in Water ASTM D546 : Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
3 ASTM D854 : Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer ASTM D979 : Standard Practice for Sampling Bituminous Paving Mixtures ASTM D 1188 : Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples ASTM D1293 : Standard Test Methods for ph of Water ASTM D1411 : Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes ASTM D1556 : Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method ASTM D1557 : Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kn-m/m3). ASTM D1856 : Standard Test Method for Recovery of Asphalt From Solution by Abson Method ASTM D2041 : Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures ASTM D2167 : Standard Test Method for Density and Unit Weight of Soil In-Place by the Rubber Balloon Method ASTM D2070 : Standard Test Method for Thermal Stability of Hydraulic Oils ASTM D2170 : Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens). ASTM D2172 : Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures ASTM D2216 : Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass ASTM D2487 : Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System). ASTM D2488 : Standard Practice for Description and Identification of Soils (Visual- Manual Procedure) ASTM D2726 : Standard Test Method for Bulk Specific Gravity and Density of Non- Absorptive Compacted Bituminous Mixtures ASTM D6938 : Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth). ASTM D3080/D3080M : Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions ASTM D3203 : Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
4 ASTM D3665 : Standard Practice for Random Sampling of Construction Materials ASTM D 3666 : Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials ASTM D3740 : Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction Practices. ASTM D4318 : Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils ASTM D4541 : Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers ASTM D4767 : Standard Test Method for Consolidated-Undrained Triaxial Compression Test on Cohesive Soils ASTM E 329 : Standard Specification for Agencies Engaged in Construction Inspection, Testing or Special Inspection ASTM C94/C94M : Standard Specification for Ready-Mixed Concrete. ASTM E548 : Standard Guide for General Criteria Used for Evaluating Laboratory Competence BRITISH STANDARDS (BS) BS 197-4Cement Part 4 : Composition, specifications and conformity criteria for low early strength blast furnace cements. BS 1427 : Guide to On-Site Test Methods for the Analysis of Waters. BS 812 : Testing of Aggregates BS EN : Testing fresh Concrete. Sampling. BS EN : Testing fresh Concrete. : Slump test. BS EN : Testing hardened concrete : Shape, dimensions and other requirements for specimens and moulds BS EN : Testing hardened concrete. Making and curing specimens for strength tests. BS EN : Testing hardened concrete. : Density of hardened concrete. BS EN : Testing concrete in structures. : Cored specimens. Taking, examining and testing in compression. BS 1881 Part 124 : Methods of Analysis of Hardened Concrete BS EN : Aggregates for concrete. BS 1377 : Methods of Test for Soils for Civil Engineering Purposes
5 BS EN 1008 : Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete. BS EN : Lightweight aggregates: Lightweight aggregates for concrete, mortar and grout. BS 4449 : Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. BS 4482 : Steel wire for the reinforcement of concrete products. BS 4483 : Steel Fabric for the Reinforcement of Concrete BS EN : Concrete - Specification, performance, production and conformity. BS 6699 : Specification for ground granulated blast furnace Slag for use with Portland cement BS EN : Methods of testing cement. BS DD 216 : Method for Determination of Chloride Content of Fresh Concrete. BS EN : Testing hardened concrete - Compressive strength of test specimens. BS : Concrete - Complementary British Standard to BS EN Method of specifying and guidance for the specifier BS : Concrete - Complementary British Standard to BS EN Specification for constituent materials and concrete BS EN : Ground granulated blast furnace slag for use in concrete, mortar and grout. Definitions, specifications and conformity criteria BS EN : Ground granulated blast furnace slag for use in concrete, mortar and grout. Conformity evaluation BS EN ISO/IEC : General requirements for the competence of testing and calibration Laboratories BS : Testing Concrete- Methods of analysis of fresh concrete BS EN : Bituminous Mixtures - Test Methods for Hot Mix Asphalt. Marshall Test BS EN : Tests for General Properties of Aggregates Methods for Sampling BS EN : Tests for geometrical properties of aggregates Determination of particle size distribution - Sieving method. BS : Testing aggregates - Method for determination of particle size distribution. Sedimentation test BS : Testing Aggregates - Methods for Determination of Particle Shape.
6 Flakiness Index BS : Testing Aggregates - Methods for Determination of Particle Shape. Elongation Index of Coarse Aggregate BS : Testing aggregates - Method for Determination of water-soluble chloride salts BS : Testing aggregates - Method for determination of soundness BS EN : Tests for General Properties of Aggregates - Definitions of Repeatability and Reproducibility BS EN : Tests for geometrical properties of aggregates. Determination of particle shape - Flakiness index. BS EN : Tests for Mechanical and physical Properties of Aggregates - Methods for the Determination of resistance to Fragmentation BS EN : Tests for Mechanical and physical Properties of Aggregates - Determination of Loose Bulk Density and Voids BS EN : Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption BS EN : Tests for thermal and weathering properties of aggregates - Magnesium sulphate test BS EN : Tests for chemical properties of aggregates - Chemical analysis. BS : Methods of test for Soils for civil engineering purposes BS 1881 Part 122 : Method for Determination of Water Absorption AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS (AASHTO): AASHTO T26 : Standard Method of Test for Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials AASHTO T40 : Standard Method of Test for Sampling Bituminous Materials AASHTO T259 : Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration AASHTO T260 : Standard Method of Test for Sampling and Testing for Total Chloride Ion in Concrete and Concrete Raw Materials AASHTO T277 : Standard Method of Test for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration AASHTO T236 : Standard Method of Test for Direct Shear Test of Soils under
7 Consolidated Drained Conditions
STRATA Certified Laboratory Tests
STRATA Certified Laboratory Tests Table 1. List of Certified Soil Tests 1 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2 ASTM D 698-12 Standard Test Method for Compaction Characteristics
More informationFlood Testing Laboratories, Inc.
in Chicago, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More informationStandard Testing & Engineering, LLC
Standard Testing & Engineering, LLC dba Standard Testing & Engineering Company in Oklahoma City, Oklahoma, USA has demonstrated proficiency for the testing of construction materials and has conformed to
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. 3011 South Huson Street, Suite A Tacoma, WA 98409 Eric Allen Phone: 253 589 1804 Valid To: December 31, 2019 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA Jeff Roberts Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA 50309 Jeff Roberts Phone: 515 282 8818 Valid To: April 30, 2019 Certificate Number: 0576.01 In recognition
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHWEST GEOTECH, INC. d/b/a NORTHWEST TESTING, INC. 9120 SW Pioneer Court, Suite B Wilsonville, OR 97070 Thomas Ginsbach, P.E. Phone: 503 682 1880 Valid To:
More informationIAS Accreditation Number Materials Testing and Inspection 2791 South Victory View Way Boise, Idaho 83709
IAS Accreditation Number Company Name Inspection Address 2791 South Victory View Way Boise, Idaho 83709 Contact Name Elizabeth Brown, P.E. Corporate Quality Manager Telephone (208) 376-4748 Effective Date
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CARLSON TESTING, INC Hudson Avenue, NE Salem, OR James Hathaway, PE Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARLSON TESTING, INC. 4060 Hudson Avenue, NE Salem, OR 97301 James Hathaway, PE Phone: 503 589 1252 Valid To: January 31, 2020 Certificate Number: 0258.03 In
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 N Cutter Circle, Suite #480 Portland, OR 97217 Joseph A. Morrissey, PE Phone: 503 289 1778
More informationTerracon Consultants, Inc.
in College Station, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationLaboratory Certification For. Delta Afghan Technical Engineering Services (DATES)
Laboratory Certification For Delta Afghan Technical Engineering Services (DATES) Lab ID: LCP-026 Issue date: Jan 6 th, 2019 Expiry date: July 5 th, 2019 This letter confirms the completion of inspection
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QC LABORATORIES, INC. 10810 Northwest Freeway Houston, TX 77092 Damon Dolat Phone: 713 695 1133 Valid to: July 31, 2018 Certificate Number: 1127.01 In recognition
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OTTO ROSENAU & ASSOCIATES, INC. 6747 Martin Luther King Jr. Way S. Seattle, WA 98118 Judi Rosenau-Payseno Phone: 206 725 4600 Valid To: February 28, 2019 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. HTS, INC. CONSULTANTS 416 Pickering Houston, TX Terry J. Jackson, P.E. Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HTS, INC. CONSULTANTS 416 Pickering Houston, TX 77206 Terry J. Jackson, P.E. Phone: 713 692 8373 Valid To: October 31, 2018 Certificate Number: 0029.01 In recognition
More informationPAVETEX Engineering, LLC
in El Paso, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More informationPennoni Associates, Inc.
in Bethlehem, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More information1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
More informationStandard test method for organic impurities in fine aggregates for concrete. Standard test method for chemical analysis of hydraulic cement
IAS Accreditation Number TL-454 Company Name (QEL)- Foreign Branch Address Shed-9, Building-2189, Road-1529, Block 115 P.O. Box 50191 Hidd Kingdom of Bahrain Contact Name Sreekala Prabasankar, Technical
More informationGeoTesting Express, Inc.
in Acton, Massachusetts, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationNelson Testing Laboratories
in Elmhurst, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationLaboratory Certification For. Build Afghanistan Engineering Services (BAES) Laboratory
Laboratory Certification For Build Afghanistan Engineering Services (BAES) Laboratory Lab ID: LCP-017 Issue date: Oct 5, 2016 Expiry date: April 4, 2017 This Extension letter confirms the completion of
More informationLABORATORY INSPECTION INFORMATION REQUEST
LABORATORY INSPECTION INFORMATION REQUEST This information will assist in the processing of laboratory inspections. The inspection is a two-man day comprehensive review that includes review of the quality
More informationFHWA-Central Federal Lands Highway Division
in Denver, Colorado, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More informationIAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531
IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA 98531 Contact Name Tim A. Barney, President Telephone (360) 736-3922 Effective Date of Scope November 30, 2017
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TOLUNAY-WONG ENGINEERS, INC 10710 Sam Houston Parkway West, Suite 100 Houston, TX 77031 Patricia Hodgkins Phone: 504 202 7541 Valid To: February 29, 2020 Certificate
More informationUnited-Heider Inspection Group Goldencrest Drive, Suite 114, Moreno Valley, CA 92553, USA Martin Lowenthal, General Manager
IAS Accreditation Number Company Name Address Contact Name Telephone +1 (951) 697-4777 Effective Date of Scope August 28, 2017 Accreditation Standard ISO/IEC 17025:2005 CMT TL-699 22620 Goldencrest Drive,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEOTECH ENGINEERING AND TESTING, INC. 17407 Highway 59 North Humble, TX 77396 Andrie Fruel, P.E. Phone: 713 699 4000 Valid To: December 31, 2019 Certificate
More informationFHWA-Western Federal Lands Highway Division
in Vancouver, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationLaboratory Certification For. Reno Geotech & Construction Material Testing Company
Laboratory Certification For Reno Geotech & Construction Material Testing Company Lab ID: LCP-011 Issue date: June 10 th, 2018 Expiry date: Dec 9 th, 2018 This letter confirms the completion of inspection
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
More informationSeattle Public Utilities Materials Laboratory
in Seattle, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
More informationGeotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited Houston, TX for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized International
More informationSpecial Provision No. 199S64 July 2016
GENERAL REQUIREMENTS FOR REFEREE TESTING Special Provision No. 199S64 July 2016 1.0 Scope This Special Provision describes the common requirements for referee testing related to laboratory and field testing
More informationLaboratory Certification For. National Engineering Services for Rehabilitation of Afghanistan (NESRA)
Laboratory Certification For National Engineering Services for Rehabilitation of Afghanistan (NESRA) Lab ID: LCP-004 Issue date: Feb 15 th, 2018 Expiry date: Aug 14 th, 2018 This extension letter confirms
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited (FORMERLY KNOWN AS GORRONDONA & ASSOCIATES, INC.) Houston, TX for technical competence in the field of Geotechnical Testing This laboratory is accredited in accordance
More information2501 PART V SECTION 2501 PART V
SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable procedures as outlined in the KDOT Construction Manual, Part V. This includes, but is not limited
More informationDIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
More informationWiss, Janney, Elstner Associates, Inc.
in Northbrook, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationGeotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
More informationLIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
More informationPRI Asphalt Technologies, Inc.
in Tampa, Florida, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More informationFrom: Samaniego, Eric E@DOT Date: Tue, Jul 1, 2014 at 8:38 AM Subject: FW: FW: City of Los Angeles 2014 QAP To: "ray.solomon@lacity.org" Cc: "Kumar,
More informationDIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
More informationBeyond Engineering & Testing, LLC.
in Round Rock, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More informationDiscipline Mechanical Testing Issue Date Certificate Number T-1169 Valid Until Last Amended on
Last Amended on 08.06.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Reinforcing Bar Nominal mass of HSD rebar IS 1786: 2008 (RA 2013) 0.075 kg/m to 15 kg/m Tensile Test of HSD rebar 2. Strands
More informationKANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
More informationLIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
More informationChecklist for Ready Mix Concrete Supply of Concrete (RMC)
C.A.01/CIDCO/SE(KHR)/EE(KHR-I)/2010 11 Pg. 568 Checklist for Ready Mix Concrete Supply of Concrete (RMC) Name of Work : C.A. : Name of Contractor/Client : 1. Name of RMC manufacturer with plant address
More informationCEMENT AND CONCRETE RELATED STANDARDS. Updated in May 2018 CONCRETE STANDARDS DESIGN AND EXECUTION STANDARDS MANAGEMENT SYSTEMS STANDARDS
CEMENT AND CONCRETE RELATED S Updated in May 2018 CONCRETE S BS EN 206 +A1:2016 BS 8500-1:2015 +A1:2016 BS 8500-2:2015 +A1:2016 Concrete Specification, performance, production and conformity Concrete Complementary
More informationMethod of Test For In-Place Density of Treated and Untreated Soils and Aggregates
Rev. 04-12-17 Aggregates and Soils T102H T103G T104D T106B T107B T108C T111D T112F T115D T116A T200E T203G T206G T209C T210J T211J& T212J T224C T227I T228C T230D T235B Method of Test For In-Place Density
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
This annex is valid from: 16-08-2017 to 01-08-2020 Replaces annex dated: 23-05-2016 Vlamoven 41 6826 TM Arnhem The Netherlands Location(s) where activities are performed under accreditation Head Office
More informationContents EN 206:2013+A1:2016 (E)
Contents European foreword... 6 Introduction... 8 1 Scope... 9 2 Normative references... 10 3 Terms, definitions, symbols and abbreviations... 12 3.1 Terms and definitions... 12 3.1.1 General... 12 3.1.2
More informationGeotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
More informationDEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355 REPLY TO ATTENTION OF USACE-EC-TSB 1 June 2013 (Expiration: 2 June 2015) 2013 INSPECTION AND CERTIFICATION
More informationAESCO, Inc. Huntington Beach, California, USA
in Huntington Beach, California, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
More informationNZS 3121:2015. New Zealand Standard. Water and aggregate for concrete. Superseding NZS 3121:1986 NZS 3121:2015
NZS 3121:2015 New Zealand Standard Water and aggregate for concrete Superseding NZS 3121:1986 NZS 3121:2015 Committee Representation This standard was prepared under the supervision of the P 3121 Committee
More informationKANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
More informationDiscipline Mechanical Testing Issue Date Certificate Number T-2522 Valid Until Last Amended on - Page 1 of 13
Bureau Veritas (India) Pvt. Ltd. - Construction Services, Last Amended on - Page 1 of 13 I. MECHANICAL PROPERTIES OF MATERIALS 1. Steel Reinforcement Weight/meter IS 1786: 2008 (RA 2013) 0.1 kg to 20 kg
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Annex to declaration accreditation (scope accreditation) Location(s) where activities are performed under accreditation Head Office Vlamoven 41 6826 TM Arnhem The Netherlands Location Abbreviation/ location
More informationRadhey Testing & Consultants Pvt. Ltd., B-363, Kalindi Vihar, Agra, Uttar Pradesh. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 10 I. BUILDING MATERIALS 1. Aggregates (Coarse & Fine) Sieve Analysis IS 2386 (Part 1) 1963 (RA 2002) 4.75 mm to 100 mm 0.150 to 4.75 Specific Gravity IS 2386 (Part 3) 1963
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Prime Parkway Contact: Mr M Barham Prime Enterprise Park Tel: +44 (0)1332 383333 Derby Fax: +44 (0)1332 602607 DE1 3QB E-Mail: mike.barham@kiwa.co.uk
More informationOklahoma DOT Central Laboratory Test List
Aggregate Count of Tests: 21 Aggregate Durability Index 00091 T210 AR Bulk Density and Voids 00086 T19 AR Clay Lumps and Friable Particles 00080 T112 AR OHDL9-OHDL38 Dust Coating of Cover Aggregates 00149
More informationGENERAL EQUIPMENT. 3 Electronic analytical balance (320gr capacity - 0,001gr readability)
1. Laboratory Equipment Every laboratory equipment has its own calibration certificate and is operatedmaintained according to its manual guide. The equipment of the laboratory is listed below. The laboratory
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More information(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
More information(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
More informationCHECKLIST FOR READY MIX CONCRETE SUPPLY OF CONCRETE (RMC)
Sl.Pg. 450 CHECKLIST FOR READY MIX CONCRETE SUPPLY OF CONCRETE (RMC) Name of Work : C.A. : Name of Contractor/Client : 1. Name of RMC manufacturer with plant address & telephone nos. 2. Name of Plant In
More informationSPECIAL PROVISION Portland Cement Concrete
1993 Specifications CSJ 0271-16-117 SPECIAL PROVISION 421---040 Portland Cement Concrete For this project, Item 421, Portland Cement Concrete, of the Standard Specifications, is hereby amended with respect
More informationIndex FM 5-472/NAVFAC MO 330/AFJMAN (I)
RETURN TO TOC FM 5-472/NAVFAC MO 330/AFJMAN 32-1221(I) Index A accelerators, 4-7 additive, 5-1, 5-2, 5-5, 5-6 admixtures, 4-2, 4-3, 4-7, 4-8, 4-9, 4-20 adsorption, 2-6, 2-7 aerial photographs, 2-28, 2-30,
More informationPROGRAMME OF WORK : STANDARDS
Report : 09-0- Of 7 08 08/SC 0 470 (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes 08-08-0 508.0 Concrete retaining blocks 08-08-0 54 (SABS 54) 4.0 Concrete roofing tiles 08-08-0
More informationSPECIFICATIONS FOR FABRICATION OF PRECAST CONCRETE PANELS
SPECIFICATIONS FOR FABRICATION OF PRECAST CONCRETE PANELS 1.0 DESCRIPTION The Work shall consist of:.1 The supply of materials and the fabrication of precast concrete panels as shown and described on the
More informationPERFORMANCE-RELATED SPECIAL PROVISION FOR HIGH PERFORMANCE CONCRETE MIX DESIGNS FOR CONCRETE SUPERSTRUCTURE (Tollway)
PERFORMANCE-RELATED SPECIAL PROVISION FOR HIGH PERFORMANCE CONCRETE MIX DESIGNS FOR CONCRETE SUPERSTRUCTURE (Tollway) Effective: October 12, 2012 Revised: June 14, 2013 DESCRIPTION This work consists of
More informationFundamentals of Concrete
Components Cement Water Fine Aggregate Coarse Aggregate Fundamentals of Range in Proportions Advantages of Reducing Water Content: Increased strength Lower permeability Fundamentals of Increased resistance
More informationHandbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002)
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002) Standards and Specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations.
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationQUALITY ASSURANCE PROGRAM
QUALITY ASSURANCE PROGRAM FOR CONSTRUCTION and CITY OF LAREDO JUNE 2005 2005 by Texas Department of Transportation (512) 506-5803 All Rights Reserved TABLE OF CONTENTS SECTION 1 - INTRODUCTION... 3 1.1
More informationCTL Engineering of Indiana, Inc.
in Indianapolis, Indiana, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationNATURAL POLYMER AS WATERPROOFING COMPOUND IN CEMENT CONCRETE
NATURAL POLYMER AS WATERPROOFING COMPOUND IN CEMENT CONCRETE Remya V 1 and Hima Elizabeth Koshy 2 1,2 Assistant Professor, Department Of Civil Engineering, Mount Zion College of Engineering, Pathanamthitta
More informationItem P-219 Recycled Concrete Aggregate Base Course
Item P-219 Recycled Concrete Aggregate DESCRIPTION 219-1.1 This item consists of a base course composed of recycled concrete aggregate, crushed to meet a particular gradation, constructed on a prepared
More informationSECTION 904 AGGREGATES
SECTION 904 AGGREGATES 904.01 Aggregates. Aggregates shall consist of natural or manufactured materials produced from but not limited to limestone, dolomite, gravels, sandstones, steel furnace slag (SF),
More informationMATERIAL SPECIFICATION FOR AGGREGATES - GENERAL
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1001 MARCH 1993 MATERIAL SPECIFICATION FOR AGGREGATES - GENERAL 1001.01 SCOPE 1001.02 REFERENCES 1001.03 DEFINITIONS TABLE OF CONTENTS 1001.04 SUBMISSION
More informationAggregate Specifications
Qualified Aggregate Technician Kentucky Specifications Aggregate Specifications State, FHWA, FAA, Contractor Kentucky Transportation Cabinet 107 Aggregate Size Designations Nominal Maximum Size The largest
More informationTroubleshooting Aggregates and Admixtures
Troubleshooting Aggregates and Admixtures Portland Cement Association Founded in 1916 Headquarters: Skokie, Illinois USA References Design and Control of Concrete Mixtures, EB001.16, PCA 2016 CH 8 Aggregates
More informationCHAPTER 3 MATERIAL PROPERTIES AND MIX DESIGN
50 CHAPTER 3 MATERIAL PROPERTIES AND MIX DESIGN 3.1 GENERAL Cement concrete is a composite material comprises of cement, fine aggregate, coarse aggregate and water. Nowadays, concrete is made with several
More information(DEPARTMENT OF CIVIL ENGINEERING)
CONSULTANCY & MATERIAL TESTING SERVICES (DEPARTMENT OF CIVIL ENGINEERING) VNR VIGNANA JYOTHI INSTITUTE OF ENGINEERING & TECHNOLOGY Bachupally, Nizampet( S.O.),Hyderabad -500 090 Phone: 040-23042758/59/60
More information3- Highway Materials Aggregates
3- Highway Materials Aggregates Highway Materials/ Aggregates Aggregates are granular mineral particles that are widely used for highway bases, subbases, and backfill. Aggregate are also used in combination
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationSECTION 706 AGGREGATES FOR PORTLAND CEMENT PRODUCTS SCOPE
706 706.01.01 MATERIALS COVERED SECTION 706 AGGREGATES FOR PORTLAND CEMENT PRODUCTS SCOPE A. This specification covers the quality and size of aggregates used in Portland cement products. 706.02.01 GENERAL
More informationUtilization of micro silica as partial replacement of OPC & SRC in concrete
International Refereed Journal of Engineering and Science (IRJES) ISSN (Online) 2319-183X, (Print) 2319-1821 Volume 3, Issue 3(March 2014), PP.67-73 Utilization of micro silica as partial replacement of
More informationDoç. Dr. Halit YAZICI. D. E. U. Civil Engineering Department.
Doç. Dr. Halit YAZICI D. E. U. Civil Engineering Department http://kisi.deu.edu.tr/halit.yazici Chemical Admixtures In Concrete What Are They? Ingredients other than: Cement Water Aggregates Added before
More informationINVESTIGATION INTO THE USE OF MICROSILICA AND FLY ASH IN SELF COMPACTING CONCRETE
www.arpapress.com/volumes/vol24issue2/ijrras_24_2_03.pdf INVESTIGATION INTO THE USE OF MICROSILICA AND FLY ASH IN SELF COMPACTING CONCRETE Victor Ajileye Faseyemi Technical Manager Al Andalus Factory for
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
chedule of Accreditation 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK 5 Churchill Place Canary Wharf London E14 5HU Contact: Mr G P Booker Tel: +44 (0)20 38102416 Fax: +44 (0)20 7216 6950
More informationCLASS: II YEAR / IV SEMESTER CIVIL SUBJECT CODE AND NAME: CE 6401 CONSTRUCTION MATERIALS UNIT I STONES-BRICKS-CONCRETE BLOCKS
CLASS: II YEAR / IV SEMESTER CIVIL SUBJECT CODE AND NAME: CE 6401 CONSTRUCTION MATERIALS UNIT I STONES-BRICKS-CONCRETE BLOCKS PART-A 1. What are the important uses of stones? 2. What are the different
More informationJAZAN UNIVERSITY. CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory
JAZAN UNIVERSITY College of Engineering CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory The Equipment The Purpose To determination of compressive strength of samples Bricks,
More information