LABORATORY INSPECTION INFORMATION REQUEST
|
|
|
- Janis Carter
- 5 years ago
- Views:
Transcription
1 LABORATORY INSPECTION INFORMATION REQUEST This information will assist in the processing of laboratory inspections. The inspection is a two-man day comprehensive review that includes review of the quality system, verification of test equipment, and observation of test procedures performed. Please complete and return to: Commander U.S. Army Engineer Research and Development Center ATTN: Ms. Brittany N. Hopkins, CEERD-GM-C 3909 Halls Ferry Road Vicksburg, MS Phone: (601) Fax: (601) Brittany.N.Hopkins@usace.army.mil GENERAL LABORATORY INFORMATION Date of Request: Address: Laboratory Name: Laboratory Location: Telephone Number: ( ) FAX Number: ( ) Mailing Address: Name and Title of Point of Contact: AREA OF INSPECTION DESIRED: Please check the appropriate areas for which this inspection is requested and complete the questionnaire below. Aggregates Bituminous Concrete Masonry Rock Soil LABORATORY QUALITY ASSURANCE QUESTIONNAIRE (ASTM C , C , D , D , E ) Quality System Yes No Accreditation Programs (if Yes, list date) Yes No Quality Manual AASHTO Accreditation Program (AMRL) Proficiency Sample Programs: Aggregate AMRL Accreditation Date - Bituminous AASHTO Accreditation Program (CCRL) Concrete CCRL Accreditation Date - Masonry Soil s (if Yes, list date) Certified Technicians (if Yes, list number) American Concrete Institute (ACI) National Institute for Certification in Engineering Technologies (NICET) US Army Corps of Engineers AASHTO Materials Reference Laboratory (AMRL) Cement and Concrete Reference Laboratory (CCRL) U.S. Army Corps of Engineers Information District Contact: Telephone: ( ) NOTE: The U.S. Army Corps of Engineers Materials Testing Center (MTC) does not certify nor does it provide any accreditation to laboratories. The MTC conducts inspections to validate the capability of a laboratory to perform specific tests as required by contract with the U.S. Army Corps of Engineers. Revised: 13 July 2016
2 Aggregate Checklist column if a test method has been previously inspected by AMRL or CCRL within the past two years. Test Method Test Procedure No. Check AMRL/CCR REQUIRED TESTS PER ASTM C ASTM C Material Finer than 75 :µm (No. 200) Sieve A1 ASTM C Specific Gravity & Absorption in Coarse Aggregate A2 ASTM C Specific Gravity & Absorption in Fine Aggregate A3 ASTM C Sieve Analysis of Aggregates A4 OPTIONAL TESTS PER ASTM C ASTM C Unit Weight and Voids in Aggregate A5 ASTM C Organic Impurities A6 ASTM C Surface Moisture in Fine Aggregate A7 ASTM C Effects of Organic Impurities on Mortar Strength A8 ASTM C Sulfate Soundness A9 ASTM C Lightweight Particles A10 ASTM C Los Angeles Abrasion Resistance on Small-Size Coarse Aggregate A11 ASTM C Clay Lumps A12 ASTM C Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar) A13 ASTM C Alkali-Silica Reactivity of Aggregates (Chemical Method) A14 ASTM C Petrographic Examination A15 ASTM C Effectiveness of Mineral Admixtures or GBFS on Preventing A16 ASTM C Los Angeles Abrasion Resistance on Large Size Coarse Aggregate A11 ASTM C Total Moisture Content A17 ASTM C Alkali Reactivity of Carbonate Rocks (Rock Cylinder Method) A18 ASTM C Staining Materials in Lightweight Aggregates A19 ASTM C Reducing Samples to Testing Size A20 ASTM C Length Change Due to Alkali-Carbonate Reaction A21 ASTM C Abrasion Resistance of Concrete (Underwater Method) A22 ASTM C Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) A23 ASTM C (15) Length Change Alkali-Silica Reaction A24 ASTM D Sampling A25 ASTM D Sieve Analysis of Mineral Filler A26 ASTM D Sand Equivalent Value A27 ASTM D Aggregate Durability Index A28 ASTM D Flat or Elongated Particles A29 ASTM D Percentage of Fractured Particles in Coarse Aggregate A30 CRD-C Fineness Modulus A4 CRD-C Flat and Elongated Particles A29 CRD-C Scratch Hardness A31 CRD-C Percentage of Crushed Particles in Aggregate A32
3 Bituminous Checklist column if a test method has been previously inspected by AMRL within the past two years. Test Method Test Procedure (ASTM D ) No. Check AMRL ASTM D 5-13 Penetration B1 ASTM D Softening Point B2 ASTM D Density of Semi-Solid Bituminous Mat ls (Pycnometer Method) B3 ASTM D Float Test B4 ASTM D Sampling Bituminous Materials B5 ASTM D (14) Mineral Filler for Bituminous Paving Mixtures B6 ASTM D Penetration Residue B7 ASTM D Emulsified Asphalts B8 ASTM D Distillation of Cut-Back Asphalts B9 ASTM D Sampling Bituminous Paving Mixtures B10 ASTM D Compressive Strength B11 ASTM D Effect of Water on Compressive Strength B12 ASTM D (15) Bulk Specific Gravity & Density Using Coated Samples B13 ASTM D Moisture or Volatile Distillates in Bituminous Paving Mixtures B14 ASTM D Resistance to Deformation & Cohesion by Hveem B15 ASTM D Preparation by CA Kneading Compactor B16 ASTM D (14) Effect of Heat & Air by Thin Film Oven B17 ASTM D (15) Recovery of Asphalt by Abson B18 ASTM D Theoretical Maximum Specific Gravity & Density (Rice) B19 ASTM D Solubility by Trichloroethylene B20 ASTM D Kinematic Viscosity B21 ASTM D Viscosity by Vacuum Capillary Viscometer B22 ASTM D Quantitative Extraction B23 ASTM D Bulk Specific Gravity and Density B24 ASTM D Effect of Heat & Air on Moving Film by Rolling Thin Film Oven B25 ASTM D Density of Bituminous Concrete in Place by Nuclear Methods B26 ASTM D Density of Liquid Asphalts by Hydrometer B27 ASTM D Percent Air Voids B28 ASTM D Density by Nickel Crucible B29 ASTM D Random Sampling of Construction Materials B30 ASTM D Asphalt Content by Nuclear Method B31 ASTM D (14) Effect of Moisture B32 ASTM D Asphalt Recovery by Rotary Evaporator B33 ASTM D Mechanical Size Analysis of Extracted Aggregate B34 ASTM D Asphalt Content of Hot-Mix Asphalt by Ignition Method B35 ASTM D Preparation of Bituminous Specimens using Marshall B36 ASTM D Marshall Stability and Flow of Bituminous Mixtures B37 CRD-C Density and Percent Voids B38
4 Concrete Checklist column if a test method has been previously inspected by CCRL within the past two years. Test Method Test Procedure No. Check CCRL REQUIRED TESTS PER ASTM C ASTM C Making and Curing Test Specimens in the Field C1 ASTM C Compressive Strength of Cylindrical Specimens C2 ASTM C Unit Weight and Air Content by Gravimetric C3 ASTM C Slump C4 ASTM C Sampling C5 ASTM C Air Content by Volumetric ***required if C231 not performed*** C6 ASTM C Air Content by Pressure ***required if C173 not performed*** C7 ASTM C Temperature of Concrete C8 OPTIONAL TESTS PER ASTM C ASTM C Drilled Cores and Sawed Beams C9 ASTM C Flexural Strength by Third Point Loading C10 ASTM C (14) Length Change of Concrete and Mortars C11 ASTM C Concrete Thickness by Drilled Cores C12 ASTM C Making and Curing Test Specimens in Laboratory C13 ASTM C Fundamental Frequencies of Concrete C14 ASTM C Bleeding of Concrete C15 ASTM C Flexural Strength by Center Point Loading C16 ASTM C Length Change of Drilled or Sawed Concrete C17 ASTM C Time of Setting by Penetration Resistance C18 ASTM C Abrasion Resistance by Sand Blasting C19 ASTM C Air-Void System by Microscopic Determination C20 ASTM C Static Modulus of Elasticity and Poisson s Ratio C21 ASTM C Molds for Forming Concrete Test Cylinders Vertically C22 ASTM C Apparatus for Length Change of Cement Paste, Mortar, & Concrete C23 ASTM C Compressive Strength of Lightweight Insulating Concrete C24 ASTM C Splitting Tensile Strength C25 ASTM C Moist Cabinets, Moist Rooms, Water Storage Tanks C26 ASTM C Creep of Concrete in Compression C27 ASTM C Unit Mass of Structural Lightweight Concrete C28 ASTM C Pulse Velocity Through Concrete C29 ASTM C Capping Cylindrical Specimens C30 ASTM C Density, Absorption, and Voids C31 ASTM C Freezing & Thawing Concrete Specimens C32 ASTM C Scaling Resistance by Deicing Chemicals C33 ASTM C Abrasion Resistance of Horizontal Surfaces C34 ASTM C (10) Penetration Resistance of Hardened Concrete C35 ASTM C Rebound Number of Hardened Concrete C36 ASTM C Examination and Sampling Hardened Concrete in Construction C37
5 Concrete Checklist Continued column if a test method has been previously inspected by CCRL within the past two years. Test Method OPTIONAL TESTS PER ASTM C No. Check CCRL ASTM C Petrographic Examination of Hardened Concrete C38 ASTM C Compressive Strength of Cast in Place Cylinders C39 ASTM C Half-Cell Potentials of Uncoated Reinforcing Steel C40 ASTM C Concrete Pullout Strength C41 ASTM C Early Age Compression Test C42 ASTM C Abrasion Resistance by Rotating-Cutter Method C43 ASTM C (13) Density of Concrete by Nuclear Method C44 ASTM C Estimating Concrete Strength by Maturity Method C45 ASTM C Portland Cement Content of Hardened Concrete C46 ASTM C (12) Acid-Soluble Chloride in Concrete C47 ASTM C Electrical Indication of Concrete to Resist Chloride Ion C48 ASTM C Water-Soluble Chloride in Concrete C49 ASTM C Unbonded Caps C50 CRD-C Soundness by Freezing and Thawing of Concrete C51 What is the capacity of the compression testing machine(s)? How many ranges are associated with the test machine(s)?
6 Masonry Checklist column if a test method has been previously inspected by AMRL or CCRL within the past two years. Test Method Test Procedure (ASTM C ) No. Check CCRL ASTM C Compressive Strength of Cement Mortars Using Cube Specimens M1 ASTM C Sampling and Testing Concrete Masonry and Related Units M2 ASTM C Autoclave Expansion of Portland Cement M3 ASTM C Air Content of Hydraulic Cement Mortar M4 ASTM C Normal Consistency of Hydraulic Cement M5 ASTM C Time of Setting of Hydraulic-Cement Paste by Gillmore Needles M6 ASTM C Mechanical Mixing of Cement Pastes & Mortars of Plastic Consistency M7 ASTM C Evaluation of Mortars for Plain and Reinforced Unit Masonry M8 ASTM C Sampling and Testing Grout M9
7 Rock Checklist column if a test method has been previously inspected by AMRL or CCRL within the past two years. Test Method Test Procedure (ASTM D ) No. Check AMRL/CCRL ASTM D Pulse Velocity and Ultrasonic Elastic Constants R1 ASTM D Direct Tensile Strength of Intact Rock Core R2 ASTM D Tensile Strength, Splitting (Brazilian) Method R3 ASTM D Rock Bolt Anchor Pull Test R4 ASTM D Preparing Rock Core Specimens and Determining Tolerances R5 ASTM D Slake Durability of Shales and Weak Rocks R6 ASTM D (13) Durability of Rock to Freezing and Thawing R7 ASTM D (13) Durability of Rock to Wetting and Drying R8 ASTM D Laboratory direct Shear Tests on Rock Under Constant Normal R9 ASTM D Point Load Index R10 ASTM D Rock-Mass Classification for Engineering Purposes R11 ASTM D Compressive Strength & Elastic Moduli of Rock Core Specimens R12 CRD-C Resistance of Rock to Freezing and Thawing R7 CRD-C Expansive Breakdown on Soaking in Ethylene Glycol R13 CRD-C Resistance of Rock to Wetting and Drying R8
8 Soils Checklist column if a test method has been previously inspected by AMRL within the past two years. Test Method Test Procedure (ASTM D ) No. Check AMRL ASTM D Moisture-Density of Soil-Cement S1 ASTM D Wetting & Drying Soil-Cement S2 ASTM D Freezing & Thawing Soil-Cement S3 ASTM D Compaction Characteristics by Standard Effort S4 ASTM D Specific Gravity of Soils S5 ASTM D Material Finer than 75 :m (No. 200) Sieve S6 ASTM D Density & Unit Weight by Sand Cone S7 ASTM D Compaction Characteristics by Modified Effort S8 ASTM D CA Bearing Ratio (CBR) S9 ASTM D Unconfined Compressive Strength S10 ASTM D Density & Unit Weight by Rubber Balloon S11 ASTM D Calibration of Laboratory Mechanical-Rammer Soil Compactors S12 ASTM D Water Content S13 ASTM D One-Dimensional Consolidation Properties S14 ASTM D Classification of Soils S15 ASTM D Description & Identification of Soils (Visual-Manual Procedure) S16 ASTM D Unconsolidated, Undrained Strength in Triaxial Compression S17 ASTM D Density by Drive Cylinder Method S18 ASTM D Moisture, Ash, & Organic Matter of Peat & Other Organic Soils S19 ASTM D Direct Shear Test in Consolidated Drained Conditions S20 ASTM D Preserving & Transporting Samples S21 ASTM D Maximum Index Density by Vibratory Table S22 ASTM D Minimum Index Density S23 ASTM D Liquid & Plastic Limits & Plasticity Index S24 ASTM D One-Dimensional Swell or Settlement Potential S25 ASTM D Determination of Water Content of Soil by Microwave Oven S26 ASTM D Consolidated-Undrained Triaxial Compression S27 ASTM D Hydraulic Conductivity using a Flexible Wall Permeameter S28 ASTM D (09) Particle-Size Distribution of Soils Using Sieve Analysis S29 ASTM D Density and Water Content by Shallow Depth Nuclear Method S30
Standard Testing & Engineering, LLC
Standard Testing & Engineering, LLC dba Standard Testing & Engineering Company in Oklahoma City, Oklahoma, USA has demonstrated proficiency for the testing of construction materials and has conformed to
Flood Testing Laboratories, Inc.
in Chicago, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
FHWA-Central Federal Lands Highway Division
in Denver, Colorado, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Pennoni Associates, Inc.
in Bethlehem, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
GeoTesting Express, Inc.
in Acton, Massachusetts, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
STRATA Certified Laboratory Tests
STRATA Certified Laboratory Tests Table 1. List of Certified Soil Tests 1 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2 ASTM D 698-12 Standard Test Method for Compaction Characteristics
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355 REPLY TO ATTENTION OF USACE-EC-TSB 1 June 2013 (Expiration: 2 June 2015) 2013 INSPECTION AND CERTIFICATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA Jeff Roberts Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA 50309 Jeff Roberts Phone: 515 282 8818 Valid To: April 30, 2019 Certificate Number: 0576.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QC LABORATORIES, INC. 10810 Northwest Freeway Houston, TX 77092 Damon Dolat Phone: 713 695 1133 Valid to: July 31, 2018 Certificate Number: 1127.01 In recognition
Terracon Consultants, Inc.
in College Station, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHWEST GEOTECH, INC. d/b/a NORTHWEST TESTING, INC. 9120 SW Pioneer Court, Suite B Wilsonville, OR 97070 Thomas Ginsbach, P.E. Phone: 503 682 1880 Valid To:
Laboratory Certification For. Build Afghanistan Engineering Services (BAES) Laboratory
Laboratory Certification For Build Afghanistan Engineering Services (BAES) Laboratory Lab ID: LCP-017 Issue date: Oct 5, 2016 Expiry date: April 4, 2017 This Extension letter confirms the completion of
Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.
CODES & STANDARDS FOR ON-SITE TESTING LABORATORY Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner. Codes & Standards are published
Nelson Testing Laboratories
in Elmhurst, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEOTECH ENGINEERING AND TESTING, INC. 17407 Highway 59 North Humble, TX 77396 Andrie Fruel, P.E. Phone: 713 699 4000 Valid To: December 31, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OTTO ROSENAU & ASSOCIATES, INC. 6747 Martin Luther King Jr. Way S. Seattle, WA 98118 Judi Rosenau-Payseno Phone: 206 725 4600 Valid To: February 28, 2019 Certificate
Wiss, Janney, Elstner Associates, Inc.
in Northbrook, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Laboratory Certification For. Reno Geotech & Construction Material Testing Company
Laboratory Certification For Reno Geotech & Construction Material Testing Company Lab ID: LCP-011 Issue date: June 10 th, 2018 Expiry date: Dec 9 th, 2018 This letter confirms the completion of inspection
Laboratory Certification For. National Engineering Services for Rehabilitation of Afghanistan (NESRA)
Laboratory Certification For National Engineering Services for Rehabilitation of Afghanistan (NESRA) Lab ID: LCP-004 Issue date: Feb 15 th, 2018 Expiry date: Aug 14 th, 2018 This extension letter confirms
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CARLSON TESTING, INC Hudson Avenue, NE Salem, OR James Hathaway, PE Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARLSON TESTING, INC. 4060 Hudson Avenue, NE Salem, OR 97301 James Hathaway, PE Phone: 503 589 1252 Valid To: January 31, 2020 Certificate Number: 0258.03 In
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. HTS, INC. CONSULTANTS 416 Pickering Houston, TX Terry J. Jackson, P.E. Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HTS, INC. CONSULTANTS 416 Pickering Houston, TX 77206 Terry J. Jackson, P.E. Phone: 713 692 8373 Valid To: October 31, 2018 Certificate Number: 0029.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. 3011 South Huson Street, Suite A Tacoma, WA 98409 Eric Allen Phone: 253 589 1804 Valid To: December 31, 2019 Certificate
Accredited Laboratory
Accredited Laboratory A2LA has accredited Houston, TX for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized International
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TOLUNAY-WONG ENGINEERS, INC 10710 Sam Houston Parkway West, Suite 100 Houston, TX 77031 Patricia Hodgkins Phone: 504 202 7541 Valid To: February 29, 2020 Certificate
PRI Asphalt Technologies, Inc.
in Tampa, Florida, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
FHWA-Western Federal Lands Highway Division
in Vancouver, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
IAS Accreditation Number Materials Testing and Inspection 2791 South Victory View Way Boise, Idaho 83709
IAS Accreditation Number Company Name Inspection Address 2791 South Victory View Way Boise, Idaho 83709 Contact Name Elizabeth Brown, P.E. Corporate Quality Manager Telephone (208) 376-4748 Effective Date
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 N Cutter Circle, Suite #480 Portland, OR 97217 Joseph A. Morrissey, PE Phone: 503 289 1778
Accredited Laboratory
Accredited Laboratory A2LA has accredited (FORMERLY KNOWN AS GORRONDONA & ASSOCIATES, INC.) Houston, TX for technical competence in the field of Geotechnical Testing This laboratory is accredited in accordance
Seattle Public Utilities Materials Laboratory
in Seattle, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Oklahoma DOT Central Laboratory Test List
Aggregate Count of Tests: 21 Aggregate Durability Index 00091 T210 AR Bulk Density and Voids 00086 T19 AR Clay Lumps and Friable Particles 00080 T112 AR OHDL9-OHDL38 Dust Coating of Cover Aggregates 00149
Accredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
Laboratory Certification For. Delta Afghan Technical Engineering Services (DATES)
Laboratory Certification For Delta Afghan Technical Engineering Services (DATES) Lab ID: LCP-026 Issue date: Jan 6 th, 2019 Expiry date: July 5 th, 2019 This letter confirms the completion of inspection
PAVETEX Engineering, LLC
in El Paso, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
United-Heider Inspection Group Goldencrest Drive, Suite 114, Moreno Valley, CA 92553, USA Martin Lowenthal, General Manager
IAS Accreditation Number Company Name Address Contact Name Telephone +1 (951) 697-4777 Effective Date of Scope August 28, 2017 Accreditation Standard ISO/IEC 17025:2005 CMT TL-699 22620 Goldencrest Drive,
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
IAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531
IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA 98531 Contact Name Tim A. Barney, President Telephone (360) 736-3922 Effective Date of Scope November 30, 2017
2501 PART V SECTION 2501 PART V
SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable procedures as outlined in the KDOT Construction Manual, Part V. This includes, but is not limited
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
From: Samaniego, Eric E@DOT Date: Tue, Jul 1, 2014 at 8:38 AM Subject: FW: FW: City of Los Angeles 2014 QAP To: "ray.solomon@lacity.org" Cc: "Kumar,
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
Beyond Engineering & Testing, LLC.
in Round Rock, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Discipline Mechanical Testing Issue Date Certificate Number T-1169 Valid Until Last Amended on
Last Amended on 08.06.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Reinforcing Bar Nominal mass of HSD rebar IS 1786: 2008 (RA 2013) 0.075 kg/m to 15 kg/m Tensile Test of HSD rebar 2. Strands
Standard test method for organic impurities in fine aggregates for concrete. Standard test method for chemical analysis of hydraulic cement
IAS Accreditation Number TL-454 Company Name (QEL)- Foreign Branch Address Shed-9, Building-2189, Road-1529, Block 115 P.O. Box 50191 Hidd Kingdom of Bahrain Contact Name Sreekala Prabasankar, Technical
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
CTL Engineering of Indiana, Inc.
in Indianapolis, Indiana, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
AESCO, Inc. Huntington Beach, California, USA
in Huntington Beach, California, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
Geotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Special Provision No. 199S64 July 2016
GENERAL REQUIREMENTS FOR REFEREE TESTING Special Provision No. 199S64 July 2016 1.0 Scope This Special Provision describes the common requirements for referee testing related to laboratory and field testing
Index FM 5-472/NAVFAC MO 330/AFJMAN (I)
RETURN TO TOC FM 5-472/NAVFAC MO 330/AFJMAN 32-1221(I) Index A accelerators, 4-7 additive, 5-1, 5-2, 5-5, 5-6 admixtures, 4-2, 4-3, 4-7, 4-8, 4-9, 4-20 adsorption, 2-6, 2-7 aerial photographs, 2-28, 2-30,
LIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002)
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002) Standards and Specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations.
Discipline Mechanical Testing Issue Date Certificate Number T-2522 Valid Until Last Amended on - Page 1 of 13
Bureau Veritas (India) Pvt. Ltd. - Construction Services, Last Amended on - Page 1 of 13 I. MECHANICAL PROPERTIES OF MATERIALS 1. Steel Reinforcement Weight/meter IS 1786: 2008 (RA 2013) 0.1 kg to 20 kg
Method of Test For In-Place Density of Treated and Untreated Soils and Aggregates
Rev. 04-12-17 Aggregates and Soils T102H T103G T104D T106B T107B T108C T111D T112F T115D T116A T200E T203G T206G T209C T210J T211J& T212J T224C T227I T228C T230D T235B Method of Test For In-Place Density
ASTM Volume 04.08, March 2017 Soil and Rock (I): D421 D5876
Table of Contents 1 D425-88(2008) Standard Test Method for Centrifuge Moisture Equivalent of Soils 2 D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures 3
Radhey Testing & Consultants Pvt. Ltd., B-363, Kalindi Vihar, Agra, Uttar Pradesh. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 10 I. BUILDING MATERIALS 1. Aggregates (Coarse & Fine) Sieve Analysis IS 2386 (Part 1) 1963 (RA 2002) 4.75 mm to 100 mm 0.150 to 4.75 Specific Gravity IS 2386 (Part 3) 1963
PROGRAMME OF WORK : STANDARDS
Report : 09-0- Of 7 08 08/SC 0 470 (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes 08-08-0 508.0 Concrete retaining blocks 08-08-0 54 (SABS 54) 4.0 Concrete roofing tiles 08-08-0
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
This annex is valid from: 16-08-2017 to 01-08-2020 Replaces annex dated: 23-05-2016 Vlamoven 41 6826 TM Arnhem The Netherlands Location(s) where activities are performed under accreditation Head Office
QUALITY ASSURANCE PROGRAM
QUALITY ASSURANCE PROGRAM FOR CONSTRUCTION and CITY OF LAREDO JUNE 2005 2005 by Texas Department of Transportation (512) 506-5803 All Rights Reserved TABLE OF CONTENTS SECTION 1 - INTRODUCTION... 3 1.1
Fundamentals of Concrete
Components Cement Water Fine Aggregate Coarse Aggregate Fundamentals of Range in Proportions Advantages of Reducing Water Content: Increased strength Lower permeability Fundamentals of Increased resistance
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Prime Parkway Contact: Mr M Barham Prime Enterprise Park Tel: +44 (0)1332 383333 Derby Fax: +44 (0)1332 602607 DE1 3QB E-Mail: mike.barham@kiwa.co.uk
JAZAN UNIVERSITY. CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory
JAZAN UNIVERSITY College of Engineering CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory The Equipment The Purpose To determination of compressive strength of samples Bricks,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Standard Test Method for Bulk Density ( Unit Weight ) and Voids in Aggregate
IAS Accreditation Number Company Name Address TL-292 401 E. Fourth St., Bldg. 12B Bridgeport, PA 19405 Thomas Smith, Laboratory Manager Contact Name Telephone +1 (610) 313-3227 Effective Date of Scope
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Annex to declaration accreditation (scope accreditation) Location(s) where activities are performed under accreditation Head Office Vlamoven 41 6826 TM Arnhem The Netherlands Location Abbreviation/ location
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4 PROFESSIONAL SERVICES Principal Engineer / Geologist $160.00 per hour Senior Engineer / Geologist $160.00 per hour Senior Environmental Scientist
Publications Transmittal
Publications Transmittal Transmittal Number PT 11-006 Publication Title / Publication Number Materials Manual M 46-01.07 Date Originating Organization Materials Laboratory through Administrative and Engineering
PERFORMANCE-RELATED SPECIAL PROVISION FOR HIGH PERFORMANCE CONCRETE MIX DESIGNS FOR CONCRETE SUPERSTRUCTURE (Tollway)
PERFORMANCE-RELATED SPECIAL PROVISION FOR HIGH PERFORMANCE CONCRETE MIX DESIGNS FOR CONCRETE SUPERSTRUCTURE (Tollway) Effective: October 12, 2012 Revised: June 14, 2013 DESCRIPTION This work consists of
SPECIFICATIONS FOR FABRICATION OF PRECAST CONCRETE PANELS
SPECIFICATIONS FOR FABRICATION OF PRECAST CONCRETE PANELS 1.0 DESCRIPTION The Work shall consist of:.1 The supply of materials and the fabrication of precast concrete panels as shown and described on the
Action Recommendation: Budget Impact:
City of Fayetteville Staff Review Form Matt Casey 1/30/2019 ENGINEERING (621) Submitted By 2019 0086 Legistar File ID 2/19/2019 City Council Meeting Date Agenda Item Only N/A for Non Agenda Item Submitted
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
Standards on TRANSPORTATION APPLICATION Stock #: TRANS04 T A B L E O F C O N T E N T S
Standards on TRANSPORTATION APPLICATION Stock #: TRANS04 T A B L E O F C O N T E N T S VOLUME 1 C 14-03 C 29/C 29M-97 (2003) C 31/C 31M-03a C 32-04 C 33-03 C 39/C 39M-04 C 40-04 C 42/C 42M-04 C 43-03a
CONCRETE MATERIALS PROPERTIES AND TESTING
CONCRETE MATERIALS PROPERTIES AND TESTING 1 Concrete ingredients Cement Fine aggregate Coarse aggregate Water Admixtures 2 3 4 Properties of cement Physical properties of cement Fineness Standard consistency
Final Report of ASTM C Standard Specification for Lightweight Aggregates for Structural Concrete
March 19, 2012 Mr. John Pelicone Phone: 770-682-9896 Big River Industries, Inc Fax: 678-461-2845 3600 Mansell Road, Suite 575 E-mail: Pelicone@bellsouth.net Alpharetta, GA 30022 Subject: Final Report of
Publications Transmittal
Publications Transmittal Transmittal Number PT 17-032 Publication Title / Publication Number Materials Manual M 46-01.28 Originating Organization Materials Laboratory, Engineering and Regional Operations
ASPHALT BINDER AND EMULSIONS
AASHTO Accreditation Policy on PSP Participation How to use these tables: Each test that is included in a PSP will be designated with a T. If there is a special rule for participation that is other than
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
chedule of Accreditation 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK 5 Churchill Place Canary Wharf London E14 5HU Contact: Mr G P Booker Tel: +44 (0)20 38102416 Fax: +44 (0)20 7216 6950
ASPHALT BINDER AND EMULSIONS
AASHTO Accreditation Policy on PSP Participation How to use these tables: Each test that is included in a PSP will be designated with a T. If there is a special rule for participation that is other than
Capability Statement
Capability Statement Trilab is Australasia's leading independent supplier of specialised soil and rock mechanics testing, to the Asia-Pacific mining, civil construction and infrastructure industries. Two
ULTRA-HIGH STRENGTH SHEAR KEY GROUT
ULTRA-HIGH STRENGTH SHEAR KEY GROUT 187 April 30, 2015 SPECIFICATION FOR ULTRA-HIGH STRENGTH SHEAR KEY GROUT SCOPE This specification consists of the proper material selection and production of Ultra-High-
OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR PLANT MIX BITUMINOUS BASES AND SURFACES
708-3(a-g) 99 OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR PLANT MIX BITUMINOUS BASES AND SURFACES These Special Provisions revise, amend and where in conflict, supersede applicable sections
CRD-C Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforced Steel
Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforced Steel 1. Scope 1.1 This test method covers comparison of concretes on the basis of the bond developed with
Course Concrete Technology Course Code Theory Term Work POE Total Max. Marks Contact Hours/ week
Course Concrete Technology Course Code 43588 Examination Scheme Theory Term Work POE Total Max. Marks 100 50 -- 150 Contact Hours/ week 3 2 -- 5 Prepared by Mr. C.S. Patil / Mr. S.P. Patil Date Prerequisites
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES A division of the National Society of Professional Engineers
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES A division of the National Society of Professional Engineers Transportation Engineering Technology HIGHWAY MATERIALS PROGRAM DETAIL MANUAL
Mr. Jody Wall Carolina Stalite P.O. Box 186 Phone: (704)
March 19, 2015 Mr. Jody Wall Carolina Stalite P.O. Box 186 Phone: (704) 279-8614 Gold Hill, North Carolina 28071 Email: jwall@stalite.com Subject: Interim Report of ASTM C330 Dear Mr. Wall: Testing, Engineering
50 lbs (23 kg) of + #8 (+2.36 mm) material plus 50 lbs (23 kg) of pile run material.
5.5 REQUIRED SAMPLE SIZES 1. SCOPE This section covers the size of samples to be submitted to the s and Research Center for testing. The sample sizes listed are minimums and in special cases the Engineer
CEMENT AND CONCRETE RELATED STANDARDS. Updated in May 2018 CONCRETE STANDARDS DESIGN AND EXECUTION STANDARDS MANAGEMENT SYSTEMS STANDARDS
CEMENT AND CONCRETE RELATED S Updated in May 2018 CONCRETE S BS EN 206 +A1:2016 BS 8500-1:2015 +A1:2016 BS 8500-2:2015 +A1:2016 Concrete Specification, performance, production and conformity Concrete Complementary
GENERAL EQUIPMENT. 3 Electronic analytical balance (320gr capacity - 0,001gr readability)
1. Laboratory Equipment Every laboratory equipment has its own calibration certificate and is operatedmaintained according to its manual guide. The equipment of the laboratory is listed below. The laboratory