GENERAL EQUIPMENT. 3 Electronic analytical balance (320gr capacity - 0,001gr readability)
|
|
|
- Amos Barton
- 5 years ago
- Views:
Transcription
1 1. Laboratory Equipment Every laboratory equipment has its own calibration certificate and is operatedmaintained according to its manual guide. The equipment of the laboratory is listed below. The laboratory tests are conducted according to the national and international specifications. GENERAL EQUIPMENT 1 Drying oven 55 lt Drying oven 111 lt Electronic analytical balance (0gr capacity - 0,001gr readability) 4 Electronic analytical balance (4100gr capacity - 0,01gr readability) 5 Electronic balance (10100gr capacity - 0,1gr readability) 6 Electronic balance (0.000gr capacity - 1gr readability ) 7 Desiccator 8 Hand held digital thermometer, -75 to +100 o C 9 Digital thickness gauge 10 Digital time stoper 11 Sample reduction device 1 Sieve shaker 1 Measuring cylinders, beakers, funnels and flasks, stirring rod, evaporating dishes, wash bottles, trays 14 PC, Printers 1
2 SOIL & ROCK MECHANICS EQUIPMENT 1 Woven wire mesh sieves 1" (ISO 10-1,) Liquid limit device (Casagrande) 4 Plastic limit set 5 Constant temperature and circulating water bath 6 Specific gravity hydrometer 151H 7 High speed stirrer 9 Proctor moulds (101,6 mm) 10 Proctor moulds (15,4 mm) 11 CBR equipment (ASTM) 1 CBR equipment (BS) 1 Automatic Proctor and CBR compaction machine 14 CBR - Testing Machine (50kN) 15 Proctor Penetrometer 16 One-dimensional consolidation apparatus (pcs) 17 Direct / Residual shear apparatus 18 Autonumous Data Acquisition Unit (ADU) Software connected with shear displacement machine, one-dimensional consolidation apparatus and CBR machine 19 Unconfined compression machine 0 8 mm hand-operated extruder 1 Falling head apparatus Permeability cell 4
3 AGGREGATES EQUIPMENT 1 Woven wire mesh sieves 8" (ISO 10-1,) Woven wire mesh sieves 1" (ASTM E11) Flakiness sieve set 4 Aggregate shape gauge 5 Efflux index apparatus 6 Sand absorption cone and tamper 7 Bulk density basket 00mm 8 Specific gravity frame 9 Sand equivalent set 10 Sand replacement set 11 Basket,5 opening 1 Basket 1,18mm opening 1 Basket 0,6mm opening 14 Basket 0,150mm opening 15 Hydrometer 1,00-1,00g/ml 16 Container CONCRETE EQUIPMENT 1 Slump test device Cube moulds for concrete (15x15x15cm) 4 Curing tank for concrete specimens (1000lt capacity) 5 Automatic Compression testing machine 000kN capacity
4 . Laboratory testing The laboratory tests are conducted according to the national and international specifications. A list of the tests is presented below. SOIL & ROCK MECHANICS Lab Test Specifications 1 Determination of water content of soil E (par. ), ASTM D 16 Determination of liquid limit E (par. 5), ASTM D 418, AASTHO T 89 4 Determination of plasticity limit and plasticity index Determination of bulk density of cohesive soil E (par. 6), ASTM D 418, AASTHO T 90 E (par. ) 5 Determination of specific gravity of soil E (par. 4), ASTM D Determination of specific gravity of coarse aggregate Sieve analysis of fine and coarse aggregate dry method Determination of material finer than sieve. 00 E (par. 4), AASHTO T 85 E (par. 7), AASHTO T 7 E (par. 8) ASTM D 4 9 Particle size analysis by hydrometer E (par. 9), ASTM D 4 10 Unconfined compression test E (par. 14), ASTM D One dimensional consolidation test E (par. 1), ASTM D 45 1 Direct shear test (UU) E (par. 16), ASTM D Direct shear test (CU) E (par. 16), ASTM D Direct shear test (CD) E (par. 16), ASTM D Falling head permeability test E (par. 18) 16 In situ permeability test E (par. 6) 17 Unconfined compression strength in rock samples E (par. 4) ASTM D 98 4
5 AGGREGATES Lab Test Specifications 1 Determination of sand equivalent AASHTO T 176 Determination of optimum density after compaction with weight (Standard Proctor Test) Determination of optimum density after compaction with weight (Modified Proctor Test) E (par. 10), ASTM D 418, AASTHO T 99 E (par. 10), ASTM D 418, AASTHO T 99 4 Determination of California bearing ratio E (par. 1), ASTM D Specific gravity and absorption of coarse aggregates Specific gravity and absorption of fine aggregates Determination of in situ density by sand replacement method Soundness of aggregates by use of magnesium sulfate ASTM C 17 ASTM C 18 E (par. 1), AASTHO T 191 EN Flakiness index of aggregates EN 9-10 Flow coefficient of aggregates EN 9-6 CONCRETE Lab Test Specifications 1 Sampling fresh concrete ΣΚ-50 Preparation and maintenance of concrete specimens Compressive strength of cubic concrete specimens ΣΚ-0 ΣΚ-04 4 Determination of fresh concrete slump ΣΚ-09 5
Beyond Engineering & Testing, LLC.
in Round Rock, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Accredited Laboratory
Accredited Laboratory A2LA has accredited Houston, TX for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized International
Accredited Laboratory
Accredited Laboratory A2LA has accredited (FORMERLY KNOWN AS GORRONDONA & ASSOCIATES, INC.) Houston, TX for technical competence in the field of Geotechnical Testing This laboratory is accredited in accordance
GeoTesting Express, Inc.
in Acton, Massachusetts, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.
CODES & STANDARDS FOR ON-SITE TESTING LABORATORY Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner. Codes & Standards are published
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA Jeff Roberts Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA 50309 Jeff Roberts Phone: 515 282 8818 Valid To: April 30, 2019 Certificate Number: 0576.01 In recognition
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
Laboratory Certification For. Delta Afghan Technical Engineering Services (DATES)
Laboratory Certification For Delta Afghan Technical Engineering Services (DATES) Lab ID: LCP-026 Issue date: Jan 6 th, 2019 Expiry date: July 5 th, 2019 This letter confirms the completion of inspection
STRATA Certified Laboratory Tests
STRATA Certified Laboratory Tests Table 1. List of Certified Soil Tests 1 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2 ASTM D 698-12 Standard Test Method for Compaction Characteristics
Laboratory Certification For. Build Afghanistan Engineering Services (BAES) Laboratory
Laboratory Certification For Build Afghanistan Engineering Services (BAES) Laboratory Lab ID: LCP-017 Issue date: Oct 5, 2016 Expiry date: April 4, 2017 This Extension letter confirms the completion of
CTL Engineering of Indiana, Inc.
in Indianapolis, Indiana, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Standard Testing & Engineering, LLC
Standard Testing & Engineering, LLC dba Standard Testing & Engineering Company in Oklahoma City, Oklahoma, USA has demonstrated proficiency for the testing of construction materials and has conformed to
Terracon Consultants, Inc.
in College Station, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Laboratory Certification For. Reno Geotech & Construction Material Testing Company
Laboratory Certification For Reno Geotech & Construction Material Testing Company Lab ID: LCP-011 Issue date: June 10 th, 2018 Expiry date: Dec 9 th, 2018 This letter confirms the completion of inspection
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
Accredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHWEST GEOTECH, INC. d/b/a NORTHWEST TESTING, INC. 9120 SW Pioneer Court, Suite B Wilsonville, OR 97070 Thomas Ginsbach, P.E. Phone: 503 682 1880 Valid To:
PAVETEX Engineering, LLC
in El Paso, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Discipline Mechanical Testing Issue Date Certificate Number T-1169 Valid Until Last Amended on
Last Amended on 08.06.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Reinforcing Bar Nominal mass of HSD rebar IS 1786: 2008 (RA 2013) 0.075 kg/m to 15 kg/m Tensile Test of HSD rebar 2. Strands
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK 18 Halcyon Court St Margaret's Way Huntingdon PE29 6DG
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TOLUNAY-WONG ENGINEERS, INC 10710 Sam Houston Parkway West, Suite 100 Houston, TX 77031 Patricia Hodgkins Phone: 504 202 7541 Valid To: February 29, 2020 Certificate
Flood Testing Laboratories, Inc.
in Chicago, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEOTECH ENGINEERING AND TESTING, INC. 17407 Highway 59 North Humble, TX 77396 Andrie Fruel, P.E. Phone: 713 699 4000 Valid To: December 31, 2019 Certificate
Registration for Experimental Work
University of Malta Faculty for the Built Environment Department of Civil and Structural Engineering Registration for Experimental Work Name of Researcher / Student: Telephone number: Mobile number: Email
Pennoni Associates, Inc.
in Bethlehem, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Laboratory Certification For. National Engineering Services for Rehabilitation of Afghanistan (NESRA)
Laboratory Certification For National Engineering Services for Rehabilitation of Afghanistan (NESRA) Lab ID: LCP-004 Issue date: Feb 15 th, 2018 Expiry date: Aug 14 th, 2018 This extension letter confirms
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. 3011 South Huson Street, Suite A Tacoma, WA 98409 Eric Allen Phone: 253 589 1804 Valid To: December 31, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QC LABORATORIES, INC. 10810 Northwest Freeway Houston, TX 77092 Damon Dolat Phone: 713 695 1133 Valid to: July 31, 2018 Certificate Number: 1127.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
Laboratory Manual. Concrete and aggregate. Content
Laboratory Manual Concrete and aggregate Content Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8 Section 9 Trial Mix Slump Density of Compacted Fresh Concrete Making of
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OTTO ROSENAU & ASSOCIATES, INC. 6747 Martin Luther King Jr. Way S. Seattle, WA 98118 Judi Rosenau-Payseno Phone: 206 725 4600 Valid To: February 28, 2019 Certificate
(DEPARTMENT OF CIVIL ENGINEERING)
CONSULTANCY & MATERIAL TESTING SERVICES (DEPARTMENT OF CIVIL ENGINEERING) VNR VIGNANA JYOTHI INSTITUTE OF ENGINEERING & TECHNOLOGY Bachupally, Nizampet( S.O.),Hyderabad -500 090 Phone: 040-23042758/59/60
Bhumi Research Centre (Civil Engineering Testing Laboratory), 2/1362, 'Bhumi House', Sagrampura, Ring Road, Surat, Gujarat
Bhumi Research Centre (Civil Engineering Testing ), Last Amended on - Page 1 of 6 AT LABORATORY I. SOIL & ROCK 1. Soil Grain Size Analysis IS 2720 (Part 4): 1985 Rev. 2, (RA 2007) Hydrometer Analysis IS
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
This annex is valid from: 16-08-2017 to 01-08-2020 Replaces annex dated: 23-05-2016 Vlamoven 41 6826 TM Arnhem The Netherlands Location(s) where activities are performed under accreditation Head Office
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
LIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
IAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531
IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA 98531 Contact Name Tim A. Barney, President Telephone (360) 736-3922 Effective Date of Scope November 30, 2017
PROGRAMME OF WORK : STANDARDS
Report : 09-0- Of 7 08 08/SC 0 470 (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes 08-08-0 508.0 Concrete retaining blocks 08-08-0 54 (SABS 54) 4.0 Concrete roofing tiles 08-08-0
For the realization of civil engineering structures, the engineer during the design stage must base his calculations according to the soil properties
SECTION 6 SOIL For the realization of civil engineering structures, the engineer during the design stage must base his calculations according to the soil properties where the structure will have to integrate.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 N Cutter Circle, Suite #480 Portland, OR 97217 Joseph A. Morrissey, PE Phone: 503 289 1778
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
JAZAN UNIVERSITY. CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory
JAZAN UNIVERSITY College of Engineering CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory The Equipment The Purpose To determination of compressive strength of samples Bricks,
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Annex to declaration accreditation (scope accreditation) Location(s) where activities are performed under accreditation Head Office Vlamoven 41 6826 TM Arnhem The Netherlands Location Abbreviation/ location
Capability Statement
Capability Statement Trilab is Australasia's leading independent supplier of specialised soil and rock mechanics testing, to the Asia-Pacific mining, civil construction and infrastructure industries. Two
OKLAHOMA DEPARTMENT OF TRANSPORTATION LABORATORY QUALIFICATION POLICY
Revised June 5, 2017 OKLAHOMA DEPARTMENT OF TRANSPORTATION LABORATORY QUALIFICATION POLICY SCOPE: This policy defines the process a lab shall follow to become qualified to conduct acceptance and QC/QA
IAS Accreditation Number Materials Testing and Inspection 2791 South Victory View Way Boise, Idaho 83709
IAS Accreditation Number Company Name Inspection Address 2791 South Victory View Way Boise, Idaho 83709 Contact Name Elizabeth Brown, P.E. Corporate Quality Manager Telephone (208) 376-4748 Effective Date
United-Heider Inspection Group Goldencrest Drive, Suite 114, Moreno Valley, CA 92553, USA Martin Lowenthal, General Manager
IAS Accreditation Number Company Name Address Contact Name Telephone +1 (951) 697-4777 Effective Date of Scope August 28, 2017 Accreditation Standard ISO/IEC 17025:2005 CMT TL-699 22620 Goldencrest Drive,
FHWA-Central Federal Lands Highway Division
in Denver, Colorado, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
WEEK 5 ACTIVITY. Lecture (2 hours)
WEEK 5 ACTIVITY Lecture (2 hours) LEARNING OUTCOMES Week 5 : (3HL) Coverage : Physical Characteristics and Classification of Soils : Density, PSD, ATL, Organic matter, ph value, Compaction test Learning
FHWA-Western Federal Lands Highway Division
in Vancouver, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
7/7/2011. Outline. Introduction. Introduction. Cement Properties. Introduction. Introduction Standard Methods for Testing Concrete
Standard Methods for Testing Concrete Ingredient CE 231 Construction Materials July 5 th, 2011 Withit PANSUK Department of Civil Engineering Faculty of Engineering Chulalongkorn University Outline Introduction
Seattle Public Utilities Materials Laboratory
in Seattle, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CARLSON TESTING, INC Hudson Avenue, NE Salem, OR James Hathaway, PE Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARLSON TESTING, INC. 4060 Hudson Avenue, NE Salem, OR 97301 James Hathaway, PE Phone: 503 589 1252 Valid To: January 31, 2020 Certificate Number: 0258.03 In
GEOTECHNICAL THE BEST IN TEST AGGREGATE
GEO THE BEST IN TEST AGGREGATE Catalog 2018 Aggregate Aggregate is a component of a composite material used to resist compressive stress and provide bulk to the composite material. For efficient filling,
J. Paul Guyer, P.E., R.A.
J. Paul Guyer, P.E., R.A. Paul Guyer is a registered civil engineer, mechanical engineer, fire protection engineer, and architect with over 35 years experience in the design of buildings and related infrastructure.
100kN Beam; 200kN Beam/Curb; 1600kN Hand operated; 1800kN Econo; 2000kN; 3000kN; 5000kN PREC3FT COMPRESSION AND FLEXURAL TESTING MACHINES
SECTION 3 CONCRETE The accurate and satisfactory test of fresh and hardened concrete are essential elements for any type of building realization. The final quality of the concrete utilized in the structure
TESTING SOIL CONDITIONS FOR VEHICLE SECURITY BARRIER TESTS
TESTING SOIL CONDITIONS FOR VEHICLE SECURITY BARRIER TESTS May 2015 Disclaimer Reference to any specific commercial product, process or service by trade name, trademark, manufacturer, or otherwise, does
Model Curriculum. 1. Construction Laboratory & Field Technician
Model Curriculum 1. Construction Laboratory & Field Technician SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction Quality Assurance & Quality Control
NLA Test & Measurement 2011 Workshops Roodevallei conference & meeting Hotel 19 th 20 th September 2011
NLA Test & Measurement 2011 Workshops Roodevallei conference & meeting Hotel 19 th 20 th September 2011 Currents test methods on SABS website Summary of changes for granular methods Grading revisions General
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. HTS, INC. CONSULTANTS 416 Pickering Houston, TX Terry J. Jackson, P.E. Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HTS, INC. CONSULTANTS 416 Pickering Houston, TX 77206 Terry J. Jackson, P.E. Phone: 713 692 8373 Valid To: October 31, 2018 Certificate Number: 0029.01 In recognition
Index FM 5-472/NAVFAC MO 330/AFJMAN (I)
RETURN TO TOC FM 5-472/NAVFAC MO 330/AFJMAN 32-1221(I) Index A accelerators, 4-7 additive, 5-1, 5-2, 5-5, 5-6 admixtures, 4-2, 4-3, 4-7, 4-8, 4-9, 4-20 adsorption, 2-6, 2-7 aerial photographs, 2-28, 2-30,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Prime Parkway Contact: Mr M Barham Prime Enterprise Park Tel: +44 (0)1332 383333 Derby Fax: +44 (0)1332 602607 DE1 3QB E-Mail: mike.barham@kiwa.co.uk
LABORATORY INSPECTION INFORMATION REQUEST
LABORATORY INSPECTION INFORMATION REQUEST This information will assist in the processing of laboratory inspections. The inspection is a two-man day comprehensive review that includes review of the quality
TESTS ON AGGREGATES 58
TESTS ON AGGREGATES 58 59 3.1 DETERMINATION OF INDICES (FLAKINESS AND ELONGATION) STANDARD IS: 2386 (Part 1) 1963. DEFINITION The Flakiness Index of aggregates is the percentage by weight of particles
1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
AESCO, Inc. Huntington Beach, California, USA
in Huntington Beach, California, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
Discipline Mechanical Testing Issue Date Certificate Number T-2522 Valid Until Last Amended on - Page 1 of 13
Bureau Veritas (India) Pvt. Ltd. - Construction Services, Last Amended on - Page 1 of 13 I. MECHANICAL PROPERTIES OF MATERIALS 1. Steel Reinforcement Weight/meter IS 1786: 2008 (RA 2013) 0.1 kg to 20 kg
ELECTROMECHANICAL UNIVERSAL TESTING MACHINE (UNIVERSAL TESTING SYSTEMS)
Product Code SCTM-8010 Servo Controlled Wide Test Space Electromechanical Universal Test Machine, 50 kn, 220-240V, 50-60Hz, 1 ph. Standards EN 10545-4, 1015-12, 13748-1, 13748-2, 491, 538, 1170-4, 1170-5,
Geotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
Method of Test For In-Place Density of Treated and Untreated Soils and Aggregates
Rev. 04-12-17 Aggregates and Soils T102H T103G T104D T106B T107B T108C T111D T112F T115D T116A T200E T203G T206G T209C T210J T211J& T212J T224C T227I T228C T230D T235B Method of Test For In-Place Density
NZS 4407:2015. New Zealand Standard. Methods of sampling and testing road aggregates. Superseding all parts of NZS 4407:1991 NZS 4407:2015
NZS 4407:2015 New Zealand Standard Methods of sampling and testing road aggregates Superseding all parts of NZS 4407:1991 NZS 4407:2015 Committee Representation This standard was prepared under the supervision
International Journal of Engineering Science Invention Research & Development; Vol. I Issue XI May e-issn:
Overview of Utilization of fly ash as cementitious material R.A.Khan 1,M.U.Siddiiqui 2,M.W.Baig 3 1,2 Lecturer, Department of Civil Engineering, Integral University,Campus Shahjahanpur, U.P.(India) 3 In-charge,
Soil Mechanics Laboratory Manual
2014 Soil Mechanics Laboratory Manual Prepared by: Dr. Arabinda Sharma Civil Engineering Department BRCM College of Engg. & Tech. Bahal-127 028, Bhiwani Haryana LIST OF EXPERIMENTS Sr. No. Name of the
Radhey Testing & Consultants Pvt. Ltd., B-363, Kalindi Vihar, Agra, Uttar Pradesh. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 10 I. BUILDING MATERIALS 1. Aggregates (Coarse & Fine) Sieve Analysis IS 2386 (Part 1) 1963 (RA 2002) 4.75 mm to 100 mm 0.150 to 4.75 Specific Gravity IS 2386 (Part 3) 1963
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK CS Testing Limited Issue No: 057 Issue date: 10 pril 2018 ccredited to Unit 14
GOVERNMENT ENGINEERING COLLEGE BANSWARA
GOVERNMENT ENGINEERING COLLEGE BANSWARA CIVIL ENGINEERING DEPARTMENT Date: Third year students of Civil Engineering, B.Tech has visited BVM Vallabh Vidyanagar from 27/04/2018 to 02/05/2018. During the
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
ISO/IC 17025:2005 Laboratory locations: Schedule of Accreditation 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Rigifa Cove Aberdeen AB12 3LR Contact: Tel: +44 (0)1224-876333 Fax: +44 (0)1224-876332
May 1, 2000 LAB MANUAL SPECIFIC GRAVITY & ABSORPTION of COARSE AGGREGATE AASHTO Designation T 85 (Mn/DOT Modified)
May 1, 2000 LAB MANUAL 1204.0 1204 SPECIFIC GRAVITY & ABSORPTION of COARSE AGGREGATE AASHTO Designation T 85 (Mn/DOT Modified) 1204.1 GENERAL This test method is intended for use in determining the bulk
Bureau of Materials and Physical Research
Memorandum To: ALL GEOTECHNICAL MANUAL USERS (AGMU) 07.1 From: Subject: Ralph E. Anderson Bureau of Materials and Physical Research Date: November 26, 2007 Please find attached the updated operating procedures
Nelson Testing Laboratories
in Elmhurst, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Oklahoma DOT Central Laboratory Test List
Aggregate Count of Tests: 21 Aggregate Durability Index 00091 T210 AR Bulk Density and Voids 00086 T19 AR Clay Lumps and Friable Particles 00080 T112 AR OHDL9-OHDL38 Dust Coating of Cover Aggregates 00149
A balance, large pans, molds, volumetric flask, tampers, rods, concrete mixing equipment, slump cone, drying fans and ovens.
Specific Gravity, Absorption and Unit Weight of PCC Aggregates and Mixing and Casting of PCC Cylinders OBJECTIVE: EQUIPMENT: To determine the weight/volume properties of aggregates used in the making of
Technical Prequalification
Technical Prequalification Table Of Content - The company In Brief. 2- Plant Description and Equipment. 3- Quality control Department. - Lab Equipment. - Material Sources. 4- Design Mix. - 450Kg/Cm2-400Kg/Cm2-350Kg/Cm2-300Kg/Cm2-250Kg/Cm2-200Kg/Cm2-50Kg/Cm2
Checklist for Ready Mix Concrete Supply of Concrete (RMC)
C.A.01/CIDCO/SE(KHR)/EE(KHR-I)/2010 11 Pg. 568 Checklist for Ready Mix Concrete Supply of Concrete (RMC) Name of Work : C.A. : Name of Contractor/Client : 1. Name of RMC manufacturer with plant address
general equipment production Our general laboratory equipment are complementary equipment that are used in conjunction with our major equipment.
general equipment production Our general laboratory equipment are complementary equipment that are used in conjunction with our major equipment. We supply an extensive inventory of general laboratory product
Action Recommendation: Budget Impact:
City of Fayetteville Staff Review Form Matt Casey 1/30/2019 ENGINEERING (621) Submitted By 2019 0086 Legistar File ID 2/19/2019 City Council Meeting Date Agenda Item Only N/A for Non Agenda Item Submitted
32.02 RESPONSIBILITIES OF THE TESTING AGENCY
32.2 RESPONSIBILITIES OF THE TESTING AGENCY 32.2.1 General All materials and operations shall be tested in accordance with these Specifications and as directed by the Project Manager. Agencies testing
001/Admin/Tender (Labs-CE-GE)/2018 Dated: 09 August 2018 TENDER SCHEDULE
001/Admin/Tender (Labs-CE-GE)/2018 Dated: 09 August 2018 TENDER SCHEDULE Tender Reference: For the work: Supply of Various Equipment s of Geotechnical Engineering Lab for CE Dept. CALL FOR TENDER 1. Sealed
Standard Test Procedures Manual
STP 204-15 Standard Test Procedures Manual 1. SCOPE 1.1 Description Of Test This method determines the stripping potential of asphalt cement from aggregate in asphalt concrete mixtures compacted by the
TABLE OF CONTENTS DECLARATION DEDICATION ACKNOWLEDGEMENTS ABSTRACT ABSTRAK
vii TABLE OF CONTENTS CHAPTER TITLE PAGE DECLARATION DEDICATION ACKNOWLEDGEMENTS ABSTRACT ABSTRAK TABLE OF CONTENTS LIST OF TABLES LIST OF FIGURES LIST OF ABBREVIATIONS LIST OF SYMBOLS LIST OF APPENDICES
Special Provision No. 199S64 July 2016
GENERAL REQUIREMENTS FOR REFEREE TESTING Special Provision No. 199S64 July 2016 1.0 Scope This Special Provision describes the common requirements for referee testing related to laboratory and field testing
CHECKLIST FOR READY MIX CONCRETE SUPPLY OF CONCRETE (RMC)
Sl.Pg. 450 CHECKLIST FOR READY MIX CONCRETE SUPPLY OF CONCRETE (RMC) Name of Work : C.A. : Name of Contractor/Client : 1. Name of RMC manufacturer with plant address & telephone nos. 2. Name of Plant In
Department of Civil Engineering. Consultancy Experiments and Charges
Department of Civil Engineering Consultancy Experiments and Charges TRANSPORTATION ENGINEERING LABORATORY Rate Per Test (Rs.) S.N0. Test Name Proposed = Existing existing *1.5 1 CBR @ Field moisture Contents
Schedule of Accreditation Issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Issued by 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK Materials Testing Division Contact: Ben Roper Northdown House Tel: +44 (0)1622 858545 Ashford Road Fax: +44 (0)1622 858544 Harrietsham
Truck Mixer, Agitator and Front Discharge Concrete Carrier. Standards. TMMB Printing
Truck Mixer, Agitator and Front Discharge Concrete Carrier Standards TMMB 100-01 2001 Printing Your Choice is Complete New Standards provide for mixing performance evaluated truck mixers with a size for