|
|
|
- Marilynn Cross
- 5 years ago
- Views:
Transcription
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66 From: Samaniego, Eric Date: Tue, Jul 1, 2014 at 8:38 AM Subject: FW: FW: City of Los Angeles 2014 QAP To: Cc: "Kumar, "Wang, "Yenjai, Ray: As stated on June 27, The City of Los Angeles QAP Revision 4 Is satisfactory and in compliance with the requirements of the QAP Manuel. You can proceed to implement it as required by the City of Los Angeles Departments.
67
68
69
70
71
72
73
74
75
76 APPENDIX E EXTENT OF TESTING (As of )
77 PHYSICAL LABORATORY (Concrete, Masonry and Steel): Calif. Test 670 ASTM A82 Test Method Method of Tests for Mechanical and Welded Reinforcing Splices Standard Specification for Steel Wire, Plain, for Concrete Reinforcement Material Steel Splices Steel Wire ASTM A185 Standard Specification for Steel Welded Wire, Fabric Steel Wire ASTM A370 ASTM A416 ASTM A496 ASTM A615 ASTM A617* ASTM A706* ASTM A722 Standard Test Methods and Definitions for Mechanical Testing of Steel Products Standard Specification for Steel Strand, Uncoated Seven-Wire for Pre-stressed Concrete Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement Standard Specification for Deformed and Plain Billet- Steel Bars for Concrete Reinforcement Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement * Standard Specification for Low-Alloy Steel Deformed Bars for Concrete Reinforcement * Standard Specification for Uncoated High-Strength Steel Bar for Pre-stressing Concrete Steel Products Steel Wire Steel Wire Steel Wire Steel Bars Steel Bars Steel Bars ASTM C31 Making and Curing Concrete Specimens in the Field Concrete ASTM C39 Compressive Strength of Cylindrical Concrete Concrete Specimens ASTM C40 Organic Impurities in Fine Aggregate Aggregate ASTM C42 Standard Method of Obtaining and Testing Drilled Cores and Sawed Beams of Concrete Concrete *Physical Laboratory participates in the Cement and Concrete Reference Laboratory (CCRL) Proficiency Samples Program.
78 PHYSICAL LABORATORY (Concrete, Masonry and Steel) Continued: ASTM C88 Test Method Standard Test Method for Soundness of Aggregate by use of Sodium Sulfate or Magnesium Sulfate ASTM C90 Standard Specification for Hollow Load Bearing Concrete Masonry Units Material Aggregate Concrete Masonry Block ASTM C109 ASTM C117 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2 inch cube specimens) Materials Finer than 75 mm (No. 200) Sieve in Mineral Aggregates by Washing Cement Aggregate ASTM C127 Specific Gravity and Absorption of Coarse Aggregate Aggregate ASTM C131 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine Aggregate ASTM C136 Sieve Analysis of Fine and Coarse Aggregate Aggregate ASTM C140 Method of Sampling and Testing Concrete Masonry Units Masonry ASTM C143 Slump of Hydraulic Cement Concrete Concrete ASTM C172 Sampling Freshly Mixed Concrete Concrete ASTM C192 ASTM C289 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory Method for Potential Reactivity of Aggregate (Chemical Method) Concrete Aggregate ASTM C301 Standard Methods of Testing Vitrified Clay Pipe Sewer Pipe ASTM C495 ASTM C497 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile Concrete Concrete Pipe ASTM C617 Capping Cylindrical Concrete Specimens Concrete
79 PHYSICAL LABORATORY (Concrete, Masonry and Steel) Continued: Test Method Material ASTM C702 Standard Practice for Reducing Field Samples of Aggregate to Testing Size Aggregate ASTM C1019 Standard Test Method for Sampling and Testing Grout Grout ASTM C1107 ASTM C1314 Standard Specification for Packaged Dry, Hydraulic- Cement Grout (Non-shrink) Standard Test Method for Compressive Strength of Masonry Prisms Grout Masonry ASTM D75 Standard Practice for Sampling Aggregates Aggregate ASTM D4791 ACI UBC Std. No Standard Test Method for Flat or Elongated Particles in Coarse Aggregate Building Code Requirements for Structural Concrete Mechanical and Welded Splices Test Method for Compressive Strength of Masonry Prisms Aggregate Steel Splices Masonry SOILS LABORATORY (Compaction, Classification and Foundation): City of L.A. Standard Plan S-610 ASTM C117 ASTM C127 AASHTO T85 ASTM C128 AASHTO T84 Test Method Moisture Density Relations of Soils Standard Test Method for Materials Fined than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing Standard Test Method for Density, Relative Density (Specific Gravity) and Absorption of Coarse Aggregates Standard Test Method for Density, Relative Density (Specific Gravity) and Absorption of Fine Aggregates Material Aggregate Soils Aggregates Aggregates Aggregates
80 SOILS LABORATORY (Compaction, Classification and Foundation) Continued: ASTM C136 ASTM C702 Test Method Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates Standard Practice for Reducing Field Samples of Aggregate to Testing Size Material Aggregates Aggregates ASTM D75 Standard Practice for Sampling Aggregates Aggregates ASTM D422 Standard Test Method for Particle-Size Analysis of Soils Soils ASTM D558 ASTM D1556 ASTM D1557 ASTM D2216 ASTM D2419 AASHTO T176 ASTM D2435 ASTM D2487 ASTM D3080 ASTM D4318 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ftlbf/ft 3 (2,700 kn-m/m 3 )) Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils Soil-Cement Soils Soils Soils Soils Soils Soils Soils Soils
81 SOILS LABORATORY (Compaction, Classification and Foundation) Continued: ASTM D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils containing Oversize Particles Soils ASTM D4829 Standard Test Method for Expansion Index of Soils Soils ASTM D6938 In-Place Density and Water Content of Soil and Soil Aggregate by Nuclear Methods (Shallow Depth) Soils/Soil Aggregate SOILS LABORATORY (Drilling): ASTM D420 ASTM D653 ASTM D1452 ASTM D1586 ASTM D1587 ASTM D2937 ASTM D3550 Test Method Standard Guide to Site Characterization for Engineering, Design, and Construction Purposes Standard Terminology Relating to Soil, Rock, and Contained Fluids Standard Practice for Soil Exploration and Sampling by Auger Borings Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils Material Soils/Rock Soil/Rock Soils Soils Soils Soils Soils ASPHALT LABORATORY (Asphalt Cement and Concrete, Emulsified Asphalt, Slurry, and Recycling Agent): ASTM C136 Test Method Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates Material Aggregate
82 ASPHALT LABORATORY (Asphalt Cement and Concrete, Emulsified Asphalt, Slurry, and Recycling Agent) Continued: ASTM D5 AASHTO T49 ASTM D70* AASHTO T228* ASTM D88 AASHTO T72 ASTM D92* AASHTO T48* ASTM D113 AASHTO T51 ASTM D244 AASHTO T59 ASTM D1188 AASHTO T275 ASTM D2041* AASHTO T209* ASTM D2170 AASHTO T201 ASTM D2171* AASHTO T202* ASTM D2726* AASHTO T166* Standard Test Method for Penetration of Bituminous Materials Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method) Standard Test Method for Saybolt Viscosity Standard Test Method for Flash and Fire Point by Cleveland Open Cup Tester Standard Test Method for Ductility of Bituminous Materials Standard Test Methods and Practices for Emulsified Asphalts Standard Test Method for Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Specimens Standard Test Method for Theoretical Maximum Specific Gravity and Density of Hot-Mix Asphalt paving Mixtures Standard Test Method for Kinematic Viscosity of Asphalt (Bitumen) Standard Test Method for Viscosity of Asphalt by Capillary Viscometer Standard Test Method for Determining Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens Asphalt Cement Emulsion Asphalt Cement Recycling Agent Emulsified Asphalt Asphalt Cement Recycling Agent Asphalt Cement Emulsion Emulsified Asphalt Asphalt Concrete Asphalt Concrete Asphalt Cement Recycling Agent Asphalt Cement Asphalt Concrete * AASHTO Materials Reference Laboratory (AMRL) certified Asphalt Laboratory to perform this Test Method
83 ASPHALT LABORATORY (Asphalt Cement and Concrete, Emulsified Asphalt, Slurry, and Recycling Agent) Continued: ASTM D2872* AASHTO T240* ASTM D2950 ASTM D3203* AASHTO T269* ASTM D3910 ASTM D4402* AASHTO T316* ASTM D4694 ASTM D4695 ASTM D5444* AASHTO T30* ASTM D6307* AASHTO T308* ASTM D6521* AASHTO R28* ASTM D6648* AASHTO T313* ASTM D6752 AASHTO T331 Standard Test Method for Effect of Heat and Air on Moving Film of Asphalt (Rolling Thin-Film Oven Test) Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods Standard Test Method for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures Standard Practices for Design and Construction of Slurry Seal Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer Standard Guide for General Pavement Deflection Measurements Standard Test Method for Mechanical Analysis of Extracted Aggregate Standard Test Method for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method Asphalt Cement Recycling Agent Asphalt Concrete Asphalt Concrete Slurry Asphalt Cement Pavement Testing Asphalt Concrete Asphalt Concrete Asphalt Cement Asphalt Cement Asphalt Concrete * AASHTO Materials Reference Laboratory (AMRL) certified Asphalt Laboratory to perform this Test Method
84 ASPHALT LABORATORY (Asphalt Cement and Concrete, Emulsified Asphalt, Slurry, and Recycling Agent) Continued: ASTM D6925* AASHTO T312* ASTM D6926* AASHTO T245* ASTM D6927* AASHTO T245* ASTM D7175* AASHTO T315* AASHTO M320 AASHTO M323 Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus, (Marshall Compaction) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus, (Stability and Flow) Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Standard Specification for Performance Graded Asphalt Standard Specification for Superpave Volumetric Mix Design Asphalt Concrete Asphalt Concrete Asphalt Concrete Asphalt Cement Asphalt Cement Asphalt Concrete AASHTO R18* Establishing and Implementing a Quality System for Construction Materials Testing Laboratory AASHTO R47* Reducing Samples of Hot-Mix Asphalt to Testing Size Quality Assurance Asphalt Concrete * AASHTO Materials Reference Laboratory (AMRL) certified Asphalt Laboratory to perform this Test Method. SPECIAL TESTING AND RESEARCH LABORATORY: Calif. Test 342 Test Method Method of Test for Surface Skid Resistance with the California Portable Skid Testing Material AC/PCC Pavement and Other Driving Surface ASTM A36 Tensile Testing of Carbon Structural Steel Steel
85 SPECIAL TESTING AND RESEARCH LABORATORY Continued: ASTM A82 Test Method Mechanical Testing of Cold-Drawn Steel Wire for Concrete Reinforcement Steel Material ASTM A90 Weight of Coating on Zinc-Coated Iron or Steel Articles Zinc ASTM A307 Mechanical Testing of Carbon Steel Bolts and Studs Steel ASTM A325 Mechanical Testing of High Strength, Heavy Hex Structural Steel Bolts Steel ASTM A370 Mechanical Testing of Steel Products Steel ASTM A500 Testing of Cold-Formed, Carbon Steel Structural Tubing Steel ASTM A572 Testing of High Strength Low-Alloy Structural Steel Steel ASTM A648 Mechanical Testing of High Strength Steel Wire for Prestressed Concrete Pipe Steel ASTM A992 Tensile Testing of Rolled Steel Structural Shapes Steel ASTM B136 ASTM B137 ASTM B244 ASTM C1028 Measurement of Stain Resistance of Anodic Coatings on Aluminum Measurement of Mass of Coating on Anodically Coated Aluminum Measurement of Thickness of Anodic Aluminum Coatings on Aluminum and of Other Non-Conductive Coatings on Non-Magnetic Basis Metals with Eddy- Current Instrument Standard Test Method For Determining The Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces By The Horizontal Dynamometer Pull-Meter Method Aluminum Aluminum Aluminum Ceramic Tile ASTM D395 Rubber Property-Compression Set Rubber ASTM D412 Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension Rubber
86 SPECIAL TESTING AND RESEARCH LABORATORY Continued: ASTM D570 Water Absorption of Plastics Plastic ASTM D638 Tensile Properties of Plastics Plastic ASTM D790 Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulation Materials Plastic ASTM D1238 Flow Rates of Thermoplastics by Extrusion Plastometer Thermoplastic ASTM D1400 Non-Destructive Measurement of Dry Film Thickness of Non-Conductive Coatings applied to a Nonferrous Metal Base Coatings ASTM D2240 Rubber Property-Durometer Hardness Rubber ASTM D2412 ASTM D2444 Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading Impact Resistance of Thermoplastic Pipe Fittings by Means of a Tup Plastic Pipe Thermoplastic ASTM D2584 Ignition Loss of Cured Reinforced Resins Resins ASTM D3359 Measuring Adhesion by Tape Test Coatings ASTM E8 Tension Testing of Metallic Materials Metals ASTM E605 ASTM F606 ASTM G62 Thickness and Density of Sprayed Fire-Resistive Material Applied to Structural Members Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets Standard Test Method for Holiday Detection in Pipeline Coatings Fire-Resistive Material Hardware Pipeline Coating AWS D1.1 Structural Welding Code Steel U.T. Steel
FHWA-Central Federal Lands Highway Division
in Denver, Colorado, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Standard Testing & Engineering, LLC
Standard Testing & Engineering, LLC dba Standard Testing & Engineering Company in Oklahoma City, Oklahoma, USA has demonstrated proficiency for the testing of construction materials and has conformed to
PRI Asphalt Technologies, Inc.
in Tampa, Florida, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Flood Testing Laboratories, Inc.
in Chicago, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA Jeff Roberts Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA 50309 Jeff Roberts Phone: 515 282 8818 Valid To: April 30, 2019 Certificate Number: 0576.01 In recognition
Terracon Consultants, Inc.
in College Station, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
FHWA-Western Federal Lands Highway Division
in Vancouver, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
STRATA Certified Laboratory Tests
STRATA Certified Laboratory Tests Table 1. List of Certified Soil Tests 1 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2 ASTM D 698-12 Standard Test Method for Compaction Characteristics
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. 3011 South Huson Street, Suite A Tacoma, WA 98409 Eric Allen Phone: 253 589 1804 Valid To: December 31, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHWEST GEOTECH, INC. d/b/a NORTHWEST TESTING, INC. 9120 SW Pioneer Court, Suite B Wilsonville, OR 97070 Thomas Ginsbach, P.E. Phone: 503 682 1880 Valid To:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CARLSON TESTING, INC Hudson Avenue, NE Salem, OR James Hathaway, PE Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARLSON TESTING, INC. 4060 Hudson Avenue, NE Salem, OR 97301 James Hathaway, PE Phone: 503 589 1252 Valid To: January 31, 2020 Certificate Number: 0258.03 In
IAS Accreditation Number Materials Testing and Inspection 2791 South Victory View Way Boise, Idaho 83709
IAS Accreditation Number Company Name Inspection Address 2791 South Victory View Way Boise, Idaho 83709 Contact Name Elizabeth Brown, P.E. Corporate Quality Manager Telephone (208) 376-4748 Effective Date
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 N Cutter Circle, Suite #480 Portland, OR 97217 Joseph A. Morrissey, PE Phone: 503 289 1778
1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OTTO ROSENAU & ASSOCIATES, INC. 6747 Martin Luther King Jr. Way S. Seattle, WA 98118 Judi Rosenau-Payseno Phone: 206 725 4600 Valid To: February 28, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QC LABORATORIES, INC. 10810 Northwest Freeway Houston, TX 77092 Damon Dolat Phone: 713 695 1133 Valid to: July 31, 2018 Certificate Number: 1127.01 In recognition
Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.
CODES & STANDARDS FOR ON-SITE TESTING LABORATORY Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner. Codes & Standards are published
Seattle Public Utilities Materials Laboratory
in Seattle, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
United-Heider Inspection Group Goldencrest Drive, Suite 114, Moreno Valley, CA 92553, USA Martin Lowenthal, General Manager
IAS Accreditation Number Company Name Address Contact Name Telephone +1 (951) 697-4777 Effective Date of Scope August 28, 2017 Accreditation Standard ISO/IEC 17025:2005 CMT TL-699 22620 Goldencrest Drive,
Laboratory Certification For. Delta Afghan Technical Engineering Services (DATES)
Laboratory Certification For Delta Afghan Technical Engineering Services (DATES) Lab ID: LCP-026 Issue date: Jan 6 th, 2019 Expiry date: July 5 th, 2019 This letter confirms the completion of inspection
LABORATORY INSPECTION INFORMATION REQUEST
LABORATORY INSPECTION INFORMATION REQUEST This information will assist in the processing of laboratory inspections. The inspection is a two-man day comprehensive review that includes review of the quality
Laboratory Certification For. Reno Geotech & Construction Material Testing Company
Laboratory Certification For Reno Geotech & Construction Material Testing Company Lab ID: LCP-011 Issue date: June 10 th, 2018 Expiry date: Dec 9 th, 2018 This letter confirms the completion of inspection
Laboratory Certification For. Build Afghanistan Engineering Services (BAES) Laboratory
Laboratory Certification For Build Afghanistan Engineering Services (BAES) Laboratory Lab ID: LCP-017 Issue date: Oct 5, 2016 Expiry date: April 4, 2017 This Extension letter confirms the completion of
PAVETEX Engineering, LLC
in El Paso, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Laboratory Certification For. National Engineering Services for Rehabilitation of Afghanistan (NESRA)
Laboratory Certification For National Engineering Services for Rehabilitation of Afghanistan (NESRA) Lab ID: LCP-004 Issue date: Feb 15 th, 2018 Expiry date: Aug 14 th, 2018 This extension letter confirms
2501 PART V SECTION 2501 PART V
SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable procedures as outlined in the KDOT Construction Manual, Part V. This includes, but is not limited
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
Accredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TOLUNAY-WONG ENGINEERS, INC 10710 Sam Houston Parkway West, Suite 100 Houston, TX 77031 Patricia Hodgkins Phone: 504 202 7541 Valid To: February 29, 2020 Certificate
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
Oklahoma DOT Central Laboratory Test List
Aggregate Count of Tests: 21 Aggregate Durability Index 00091 T210 AR Bulk Density and Voids 00086 T19 AR Clay Lumps and Friable Particles 00080 T112 AR OHDL9-OHDL38 Dust Coating of Cover Aggregates 00149
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. HTS, INC. CONSULTANTS 416 Pickering Houston, TX Terry J. Jackson, P.E. Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HTS, INC. CONSULTANTS 416 Pickering Houston, TX 77206 Terry J. Jackson, P.E. Phone: 713 692 8373 Valid To: October 31, 2018 Certificate Number: 0029.01 In recognition
IAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531
IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA 98531 Contact Name Tim A. Barney, President Telephone (360) 736-3922 Effective Date of Scope November 30, 2017
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
Pennoni Associates, Inc.
in Bethlehem, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Nelson Testing Laboratories
in Elmhurst, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
GeoTesting Express, Inc.
in Acton, Massachusetts, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEOTECH ENGINEERING AND TESTING, INC. 17407 Highway 59 North Humble, TX 77396 Andrie Fruel, P.E. Phone: 713 699 4000 Valid To: December 31, 2019 Certificate
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
AESCO, Inc. Huntington Beach, California, USA
in Huntington Beach, California, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
Wiss, Janney, Elstner Associates, Inc.
in Northbrook, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Accredited Laboratory
Accredited Laboratory A2LA has accredited Houston, TX for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized International
Standard test method for organic impurities in fine aggregates for concrete. Standard test method for chemical analysis of hydraulic cement
IAS Accreditation Number TL-454 Company Name (QEL)- Foreign Branch Address Shed-9, Building-2189, Road-1529, Block 115 P.O. Box 50191 Hidd Kingdom of Bahrain Contact Name Sreekala Prabasankar, Technical
Method of Test For In-Place Density of Treated and Untreated Soils and Aggregates
Rev. 04-12-17 Aggregates and Soils T102H T103G T104D T106B T107B T108C T111D T112F T115D T116A T200E T203G T206G T209C T210J T211J& T212J T224C T227I T228C T230D T235B Method of Test For In-Place Density
Accredited Laboratory
Accredited Laboratory A2LA has accredited (FORMERLY KNOWN AS GORRONDONA & ASSOCIATES, INC.) Houston, TX for technical competence in the field of Geotechnical Testing This laboratory is accredited in accordance
LIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
Geotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR PLANT MIX BITUMINOUS BASES AND SURFACES
708-3(a-g) 99 OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR PLANT MIX BITUMINOUS BASES AND SURFACES These Special Provisions revise, amend and where in conflict, supersede applicable sections
Beyond Engineering & Testing, LLC.
in Round Rock, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
50 lbs (23 kg) of + #8 (+2.36 mm) material plus 50 lbs (23 kg) of pile run material.
5.5 REQUIRED SAMPLE SIZES 1. SCOPE This section covers the size of samples to be submitted to the s and Research Center for testing. The sample sizes listed are minimums and in special cases the Engineer
Index FM 5-472/NAVFAC MO 330/AFJMAN (I)
RETURN TO TOC FM 5-472/NAVFAC MO 330/AFJMAN 32-1221(I) Index A accelerators, 4-7 additive, 5-1, 5-2, 5-5, 5-6 admixtures, 4-2, 4-3, 4-7, 4-8, 4-9, 4-20 adsorption, 2-6, 2-7 aerial photographs, 2-28, 2-30,
Radhey Testing & Consultants Pvt. Ltd., B-363, Kalindi Vihar, Agra, Uttar Pradesh. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 10 I. BUILDING MATERIALS 1. Aggregates (Coarse & Fine) Sieve Analysis IS 2386 (Part 1) 1963 (RA 2002) 4.75 mm to 100 mm 0.150 to 4.75 Specific Gravity IS 2386 (Part 3) 1963
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355 REPLY TO ATTENTION OF USACE-EC-TSB 1 June 2013 (Expiration: 2 June 2015) 2013 INSPECTION AND CERTIFICATION
Discipline Mechanical Testing Issue Date Certificate Number T-1169 Valid Until Last Amended on
Last Amended on 08.06.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Reinforcing Bar Nominal mass of HSD rebar IS 1786: 2008 (RA 2013) 0.075 kg/m to 15 kg/m Tensile Test of HSD rebar 2. Strands
PROGRAMME OF WORK : STANDARDS
Report : 09-0- Of 7 08 08/SC 0 470 (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes 08-08-0 508.0 Concrete retaining blocks 08-08-0 54 (SABS 54) 4.0 Concrete roofing tiles 08-08-0
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4 PROFESSIONAL SERVICES Principal Engineer / Geologist $160.00 per hour Senior Engineer / Geologist $160.00 per hour Senior Environmental Scientist
QUALITY ASSURANCE PROGRAM (QAP) City of Coachella California, Riverside County
QUALITY ASSURANCE PROGRAM (QAP) City of Coachella California, Riverside County The purpose of this program is to provide quality assurance that the materials incorporated into the construction projects
CEEN 3144 Construction Materials. Asphalts. Francisco Aguíñiga Assistant Professor Civil Engineering Program Texas A&M University Kingsville
CEEN 3144 Construction Materials Asphalts Francisco Aguíñiga Assistant Professor Civil Engineering Program Texas A&M University Kingsville Page 1 History of asphalts One of the oldest materials Used in
Discipline Mechanical Testing Issue Date Certificate Number T-2522 Valid Until Last Amended on - Page 1 of 13
Bureau Veritas (India) Pvt. Ltd. - Construction Services, Last Amended on - Page 1 of 13 I. MECHANICAL PROPERTIES OF MATERIALS 1. Steel Reinforcement Weight/meter IS 1786: 2008 (RA 2013) 0.1 kg to 20 kg
Special Provision No. 199S64 July 2016
GENERAL REQUIREMENTS FOR REFEREE TESTING Special Provision No. 199S64 July 2016 1.0 Scope This Special Provision describes the common requirements for referee testing related to laboratory and field testing
Reinstated KT-61: Raveling Test on Recycled Asphalt Specimens. Added KT-82: Determination of Excessive Moisture in Concrete Surfaces
s to the 2014 version of Part V of the Construction Manual This document is intended as a guide to the changes that occurred between the 2014 to the 2015 versions of Part V of the Kansas Department of
Evaluation of Warm Mix Asphalt Technologies
NTPEP Committee Work Plan for Evaluation of Warm Mix Asphalt Technologies NTPEP Designation: WMA-01-16 National Transportation Product Evaluation Program 444 North Capitol Street N.W., Suite 249 Washington,
NTPEP Evaluation of Spray Applied Non-Structural and Structural Pipe Liners for Storm Water Conveyance
Work Plan for NTPEP Evaluation of Spray Applied Non-Structural and Structural Pipe Liners for Storm Water Conveyance AASHTO Designation: [SAL] (2016) American Association of State Highway and Transportation
LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS
LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS The following pages are an index of standards and specifications associated with Lane products. For quick reference purposes, Lane products are shown below
Publications Transmittal
Publications Transmittal Transmittal Number PT 11-006 Publication Title / Publication Number Materials Manual M 46-01.07 Date Originating Organization Materials Laboratory through Administrative and Engineering
ASPHALT BINDER AND EMULSIONS
AASHTO Accreditation Policy on PSP Participation How to use these tables: Each test that is included in a PSP will be designated with a T. If there is a special rule for participation that is other than
ASPHALT BINDER AND EMULSIONS
AASHTO Accreditation Policy on PSP Participation How to use these tables: Each test that is included in a PSP will be designated with a T. If there is a special rule for participation that is other than
NTPEP Evaluation of Spray Applied Non-Structural and Structural Pipe Liners for Storm Water Conveyance
Work Plan for NTPEP Evaluation of Spray Applied Non-Structural and Structural Pipe Liners for Storm Water Conveyance AASHTO Designation: [SAL] (2018) American Association of State Highway and Transportation
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
CTL Engineering of Indiana, Inc.
in Indianapolis, Indiana, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
APPENDIX A DRAFT PERFORMANCE-BASED MIX DESIGN PROCEDURE FOR POROUS FRICTION COURSE
APPENDIX A DRAFT PERFORMANCE-BASED MIX DESIGN PROCEDURE FOR POROUS FRICTION COURSE Standard Practice for Permeable Friction Course (PFC) Mix Design AASHTO Designation: 1. SCOPE 1.1 This standard covers
Classroom Instructors: Mitch Forst (MF), Larry Shively (LS), Cliff Ursich (CU), Dave Powers (DP).
FLEXIBLE PAVEMENTS OF OHIO 2015 COMPREHENSIVE ASPHALT MIX DESIGN SCHOOL February 9-13, 2015 Columbus, Ohio ODOT Office of Materials Management, 1600 W. Broad St. Classroom Instructors: Mitch Forst (MF),
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Publications Transmittal
Publications Transmittal Transmittal Number PT 17-032 Publication Title / Publication Number Materials Manual M 46-01.28 Originating Organization Materials Laboratory, Engineering and Regional Operations
Foreword... iii Table of Contents...v List of Figures...vii List of Tables...viii. Chapter 1 : Background...1
Foreword... iii Table of Contents...v List of Figures...vii List of Tables...viii Chapter 1 : Background...1 Introduction...1 Asphalt Mixtures... 2 Asphalt Binder Behavior... 2 Mineral Aggregate Behavior...
CRD-C Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforced Steel
Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforced Steel 1. Scope 1.1 This test method covers comparison of concretes on the basis of the bond developed with
QUALITY ASSURANCE PROGRAM
QUALITY ASSURANCE PROGRAM FOR CONSTRUCTION and CITY OF LAREDO JUNE 2005 2005 by Texas Department of Transportation (512) 506-5803 All Rights Reserved TABLE OF CONTENTS SECTION 1 - INTRODUCTION... 3 1.1
Using RAP in the Superpave Mix Design System
Using RAP in the Superpave Mix Design System Mike Anderson, Asphalt Institute CUPGA 2005 Victoria, BC November 6, 2005 Acknowledgments Becky McDaniel, Purdue University Principal Investigator, NCHRP 9-12
PART 1 STANDARD SPECIFICATIONS AND STANDARD PRACTICES SUBJECT SEQUENCE TABLE OF CONTENTS
PART 1 STANDARD SPECIFICATIONS AND STANDARD PRACTICES SUBJECT SEQUENCE TABLE OF CONTENTS AGGREGATES M 6-13 M 17-11 (2015) M 29-12 (2016) M 43-05 (2013) M 45-16 M 80-13 (2017) M 195-11 (2015) M 327-11 (2015)
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Prime Parkway Contact: Mr M Barham Prime Enterprise Park Tel: +44 (0)1332 383333 Derby Fax: +44 (0)1332 602607 DE1 3QB E-Mail: mike.barham@kiwa.co.uk
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002)
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002) Standards and Specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations.
S.NO. APPARATUS NAME. Bitumen/Centrifuge Extractor - Hand Operated 1. 1.
CIVIL ENGINEERING DEPARTMENT INTEGRAL UNIVERSITY LUCKNOW TRANSPORTATION ENGINEERING LAB (ICE-552) Transportation has always played an essential role in the development of society, originally with regard
PAVER PLACED SURFACE TREATMENT
PAVER PLACED SURFACE TREATMENT **From St. Johnsbury-Lyndon IM 091-3(50) DESCRIPTION. This work shall consist of applying a paver placed surface treatment, consisting of a warm polymer modified emulsified
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MOMENTUM TECHNOLOGIES LABORATORIES, INC. 1507 Boettler Rd. Uniontown, OH 44685 Mr. Rodney G. Armstrong, III Phone: 330 896 5900 MECHANICAL Valid To: August
Student Services & Classroom Addition
SECTION 321216 - ASPHALT PAVING PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Glossary of Terms - A -
Glossary of Terms - A - AASHTO - American Association of State Highway and Transportation Officials. ABRASION - A test for determination of resistance of aggregate to abrasion conducted as per AASHTO Test
HISTORICAL PERSPECTIVES OF TXDOT MATERIALS. Footer Text
HISTORICAL PERSPECTIVES OF TXDOT MATERIALS WHAT HAS CHANGED OVER THE LAST 40 YEARS Construction Materials and Technology Table of Contents 1 Hot Mix Asphalt and Asphalt Binder 4-21 2 Concrete, Cement,
BITUMEN 1 (ASPHALT CEMENT)
BITUMEN 1 (ASPHALT CEMENT) Walied A. Elsaigh welsaigh@ksu.edu.sa Assistant Professor of Civil Engineering Rabi 2-1433H / CE432 http://fac.ksu.edu.sa/welsaigh Definition A black or dark brown non-crystalline
Sampling and Testing Asphalt Binder Materials
Page 1 of 11 1.0 SCOPE This standard practice describes the requirements for the sampling and testing of asphalt binder materials used in the construction and maintenance of Manitoba provincial highways.
SUPERPAVE. SUperior PERforming Asphalt PAVEments. History of Hveem Mix Design
SUPERPAVE SUperior PERforming Asphalt PAVEments History of Hveem Mix Design Hveem mix design was created by Francis Hveem in the 1920 s Basic premise of the design methodology is to coat each aggregate