Online Sensors. Remote Sensors - the online link between your machines and ultimate reliability

Transcription

1 Onine Sensors Remote Sensors - the onine ink between your machines and utimate reiabiity

2 Onine Sensors Monitor machine wear Cut costs Extend oi ife Avoid critica faiure The requirement for on-ine machinery and oi condition monitoring is becoming evermore apparent as maintenance costs increase and production capacity and equipment performance is maximised. Brought to you by a company that has been deivering ow-cost, robust fied instrumentation to the ubricants and fues market for over fifteen years the range of instruments has been designed to accompish the three primary objectives of oi anaysis: Ensure ubricant condition. Contro contamination. Detect and anayse wear debris. Whie temperature, pressure and vibration sensors a have their part to pay in a condition monitoring package, eary detection of changes in oi and ubricant condition and reguar, consistent monitoring of wear meta debris in rotating pant provide greater insight into the actua condition of vita machinery and equipment. Rea-time monitoring of the root cause ubricant and machine faiure wi aow you to take immediate action on the first indication of change. Suitabe for use with sow, medium and high speed diese engines, gas turbines, gearboxes, compressors, generators, vehices and other oi fied pant, these sensors hep to increase productivity, reduce costs and improve profitabiity. Use the range of onine sensors to put your oi anaysis aboratory on your doorstep. The range of sensors incudes Oi Condition, Moisture, Tota Ferrous Wear Debris and Metaic Partice. The sensors can be purchased separatey, or as part of a suite. Onine Sensors: Can be used in Remote Locations where continuous monitoring is not aways possibe by engineers. Monitor the presence of wear debris materias that signa a changing wear rate and hence the need for intervention. Monitors the presence of contaminants and moisture that may cause change in the oi condition. Rugged design and suitabe for neary a appications. Mutipe outputs, the sensors can be easiy incorporated into your existing condition monitoring and operating contro systems. Benefits Proactivey monitor critica fuids aowing eary maintenance intervention to prevent faiure. Contro the wear rate to ensure onger service ife. Increase the surveiance eve of the machine between oi sampes. Low cost of purchase and ownership. Minima annua servicing costs. Minima instaation costs.

3 Onine Sensor Suite A combination of the sensor range, the sensor suite has been deveoped to offer rea-time monitoring on critica pant such as a wind turbine gearbox. Using its own piston pump the sensor suite makes frequent inspections of remote oi and machine heath a feasibe option. The risk of samping error is eiminated and data from the sensors can be streamed via any network system, aowing remote monitoring and increasingy effective maintenance panning. Designed for mounting into the ubrication system of a machine, the suite reports metaic ferrous wear debris, oi condition, and the moisture content of the oi. Housed in a robust box it incudes the Tota Ferrous Sensor (Piston Version), Moisture Sensor and Oi Condition Sensor. Technica Specifications Ambient Operating Temperature: Ambient Operating Temperature Heated Version: Anaogue Communication Interfaces: Detection: Digita Communication Interfaces: Fuid Compatibiity: IP Rating: Max. System Fuid Pressure: Max. Fuid Viscosity: Permitted Fuid Temperatures: Power consumption : Power Input: 0 to 70 C ( F) -20 C to 70 C ( F) 4-20mA parts per miion [ppm] Un-combined ferrous debris by weight, Oi Quaity Units Index Scae, 0-100% Reative Humidity, C Temperature RS232, RS485, CAN Bus Petroeum, synthetic ois not ester based IP65 10 Bar (145psi) 350 cst 10 to 70 C ( F) 0.8 A 18 30V DC 15kg (33bs) FG-K16521-KW FG-K16567-KW Standard Sensor Suite Heated Sensor Suite A sensors come compete with software for data downoading and trending. Contact Kittiwake for information about the wide range of instaation accessories and aternative sensor suite combinations that are avaiabe to suit your specific appication. Financia Benefits Exampe: Wind Turbine Gearbox As wind turbines become arger and more compex, the power produced from them increases but so can the maintenance costs. There have been many we pubicised faiure events which have been very costy to the owners, manufacturers and to the genera perception of wind as a renewabe energy source. One such event was the faiure of a 30 2MW turbines instaed at Scroby sands in the UK. A faiures occurred within one year of instaation. Using data provided from a gearbox manufacturer, the tota cost of removing, overhauing and reinstaing a gear box can be up to 450,000*. This can be due to the turbines inaccessibiity, crane renta, man hours used and oss of earnings on the turbine. If sensor equipment detects a potentiay serious probem before it becomes too advanced and the repair coud happen without the need for a crane then the repair bi coud be a fraction of this cost. If a sensor detected oi contamination such as water in the oi or oxidation which coud ead to a serious faiure then the turbine coud be saved by just repacing the oi this coud be a 450,000 saving. * Data taken from the industria gearbox ife cyce and the tota cost of ownership by Gary Bis Hansen Transmissions BGA Gears 2006 Seminar

4 Metaic Partice Sensors The Metaic Partice Sensor goes beyond the norma wear debris sensors to offer even greater size resoution. With an unbeatabe detection range the sensor provides a debris count for both ferrous and non-ferrous metas. Now you can monitor how dirty your oi is, rea-time. Its no secret that partices cause wear. Its is imperative to know, not just the number of partices which pass through your system, but aso the size. Using the Metaic Partice Sensor aows you to now you can monitor rea-time. And take immediate action on the first indication of change. It goes beyond the norma protection systems; it prevents faiure, not just catastrophic faiure. The Metaic Partice Sensor can be mounted within amost any ubrication system on any type of machine. The sensor measures ferrous and non-ferrous metas, resuting from the wear debris within the ubricant, using a combination of proven inductive coi technoogy, combined with smart agorithms to provide a partice size distribution count. And that puts you in contro. You know that the more severe the wear probem, the more that the machine produces arger wear debris particuate. With its digita and anaogue outputs, it can be easiy integrated into your existing Condition Monitoring and operating contro systems. It puts you in contro. Whether it s to check on the heath of the machine, or an aert of changing wear patterns, the sensor provides instant information, compementing your existing aboratory oi anaysis programme, and heping you make informed maintenance panning decisions. Technica Specifications Ambient Temperature: -20 to 65 C (-4 to 149 F) Anaogue Outputs: 2 x Opto isoated 4-20mA, 1 x Aarm contacts (0.1A max) Communications: RS232, RS485 (Modbus option avaiabe) Connections: 3/8 BSPP femae Detection: 40 micron (0.04mm) [ inch] Ferrous Meta 135 micron (0.135 mm) [ inch] Non-Ferrous Meta Output: Simutaneous quantification of metaurgica composition and size category of partices in a fuid Fuid Compatibiity: Petroeum, synthetic ois and water/oi emusions Fuid Temperature: -20 to 65 C (-4 to 149 F) Fow Rate: m/s Sensor Bore: Diameter 10mm, Length 120mm Max Fuid Pressure: 10 Bar (145psi) Max Fuid Viscosity: 500cst Power Suppy: 18-30v DC Protection: IP65 1.5kg (3.3b) FG-K16121-KW Metaic Partice Sensor FG-K16355-KW Metaic Partice Sensor Evauation Pack, incudes case, power suppy and dispay A sensors come compete with software for data downoading and trending. Contact Kittiwake for information about the wide range of instaation accessories and aternative options that are avaiabe to suit your specific appication. 3/8 BSP connections for quick and easy instaation Seaed to IP65 suitabe for industria use Robust cast iron encosure providing strength and magnetic shieding LED dispay providing a visua indication of sensor status Wide range of interface options due to variety of industry standard outputs

5 Oi Condition Sensors The Oi Condition Sensor goes beyond the norma protection systems; it monitors the root cause of ubricant and machine faiure. It puts you in contro. You know exacty when to change the oi based on condition, not on historica schedues. Today s ubricants are better quaity than ever before. Sticking to od service schedues is expensive and extending oi service ife isn t guesswork. Whist ubricants perform better, you know they are sti at risk from changing operating and environmenta conditions. That s why your oi anaysis service incudes an oi condition feedback. It heps you detect when your oi may no onger be fit for service, possiby even pinpointing a contaminant or machine faut as the cause. The Oi Condition Sensor goes beyond the norma hand-hed fied go/no-go units to offer permanent mounting. Providing both a check on water ingress and oxidation eves, now you can monitor rea-time, and take immediate action on the first indication of change before any harm is done to the machine or the oi. The oi condition Sensor can be mounted within amost any ubrication system on any type of machine. The sensor detects changes caused by water and acid eves, using a combination of proven dieectric sensing, combined with smart agorithms to provide a trend. Whether it s to check on the heath of the ubricant, or an aert of changing contaminant ingression, the Oi Condition Sensor provides instant information, compementing your existing aboratory oi anaysis programme, and heping you make informed maintenance panning decisions. Technica Specifications Ambient Temperature: -20 to 70 C (-4 to 158 F) Anaogue Outputs: 4-20mA Digita Outputs: CAN, RS232 Connections: 1/2 BSP mae thread Detection: Oi Condition (Oi Quaity Units) Fuid Compatabiity: Petroeum and synthetic ois Fuid Temperature: -20 to 130 C (-4 to 266 F) Max Fuid Pressure: 10 Bar (145) psi Options: Variabe sensor head reach, Power suppy, Stand aone dispay unit, Cabe termination options by specia request Power Suppy: VDC Protection: IP67 Range: Oi Q Units Repeatabiity: 4% 250g (9 oz) FG-K16203-KW Standard Reach, Anaogue Output FG-K14492-KW Long Reach, Anaogue Output FG-K16330-KW Standard Reach, Anaogue & Digita Output FG-K16340-KW Long Reach, Anaogue and Digita Output FG-K16318-KW Evauation Pack Standard Reach, Dua Outputs, incudes case, power suppy and dispay FG-K16327-KW Evauation Pack Long Reach, Dua Outputs, incudes case, power suppy and dispay A sensors come compete with software for data downoading and trending. Contact Kittiwake for information about the wide range of instaation accessories and aternative options that are avaiabe to suit your specific appication. High integrity seaing, using standard automotive techniques. Interna processing power offers wide interface options. Stainess stee housing - rugged and ong ife performance Widey used 1/2 BSP thread - quick and easy instaation to a wide range of machinery God oi sensing contact - ong ife and sensitivity

6 Moisture Sensors The Moisture sensor goes beyond the norma water screening tests to te you exacty how dry your oi is. You know that the more severe the moisture ingression probem, the greater the potentia risk. You can ensure that your oi is aways beow the saturation point before free and emusified water starts to form. And take immediate action on the first indication of change. You probaby aready know that free and emusified water cause probems. But, did you know that water can increase the oxidation rate of your ubricant by more than ten times? That s why your oi anaysis service incudes a water-screening test. But were you aware that bearings coud ose 75% of their potentia service ife due to water before the oi even begins to start to ook coudy? Even in its dissoved state the water is at work, attacking the base stock, the additive package, and the machine. Pus, water can carry organisms with it that coud disabe your critica hydrauic systems. Providing a % Reative Humidity (RH) and temperature vaues, now you can monitor rea-time, the Moisture sensor can be mounted within any ubrication system on any type of machine. Moisture sensors need not be in the fuid to be effective and are aso of use in the headspace of a piece of machinery. The sensor measures the ois percentage Reative Humidity, resuting from the dissoved water within the ubricant, using a combination of proven thin fim capacitance sensors, combined with smart agorithms to provide a temperature and % RH vaue. Whether it s to check on the heath of the machine, or an aert of changing moisture ingression rates, the Moisture sensor provides instant information, compementing your existing aboratory oi anaysis programme, and heping you make informed maintenance panning decisions. Technica Specifications Accuracy Saturation: +/-2 % Accuracy Temperature: +/-1 C Aarm Defauts: Saturation: on at 65% (open), off at 60% (cosed) Anaogue Outputs: 4-20mA for % Saturation, 4-20mA for temperature of oi, open coector for aarm. Caibration: ISO/IEC 17025, NIST & NPL Traceabe Connection Method: By muticore screened cabe Digita Inputs : RS232, CAN Digita Outputs : CAN, RS232 Fuid Compatibiity: Petroeum and synthetic ois Materia: 304 Stainess Stee Max Oi Pressure: 10 bar (145psi) Oi Temperature Range: -40 to 100 C ( F) Power Suppy : Vdc <1w Seaing on encosure: IP Kg FG-K16947-KW Standard Reach - Anaogue Output FG-K16950-KW Long Reach - Anaogue Output FG-K16946-KW Digita - Standard Reach, Digita Output FG-K16949-KW Digita - Long Reach, Digita Output FG-K16948-KW Evauation Pack Standard Reach, Dua Outputs, incudes case, power suppy and dispay FG-K16951-KW Evauation Pack Long Reach, Dua Outputs, incudes case, power suppy and dispay A sensors come compete with software for data downoading and trending. Contact Kittiwake for information about the wide range of instaation accessories and aternative options that are avaiabe to suit your specific appication. Stainess stee housing - rugged and ong ife performance Smart sensor with interna processing power offers wide range of interface options High integrity seaing, using standard automotive techniques. Widey used 1/2 BSP thread - quick and easy instaation to a wide range of machinery High pressure resistant gass to meta hermetetic sea

7 Tota Ferrous Debris Sensors The range of Tota Ferrous Debris Sensors pace you in compete contro of your maintenance. Whether it s to check on the heath of the machine, or an aert of changing wear patterns, the Tota Ferro Debris Sensor provides instant information, compementing your existing oi anaysis programme, and heping you make informed maintenance panning decisions. Machines give tetae indicators of potentia probems. Any change in the wear pattern is going to resut in changes in the ferrous density. The Tota Ferro Debris Sensor goes beyond the norma chip detectors and magnetic pugs. Providing a ppm vaue, you can monitor rea-time and take immediate action on the first indication of change. The Tota Ferrous Debris Sensor can be mounted within amost any ubrication system on any type of machine. The sensor measures ferrous density, resuting from the wear debris within the ubricant, using a combination of proven magnetometry, combined with smart agorithms to provide data in Parts Per Miion (ppm). With the digita and anaogue outputs, airbast and piston options the tota ferrous sensors can be easiy integrated into your existing condition monitoring and operating contro systems. Technica Specifications Ambient temperature: -20 to 65 C (-4 to 149 F) Anaogue Output: Opto isoated 4-20mA Communications: CAN, RS232, RS485, (802.11b WLAN) Connections: Piston 1/8 BSP, Detection: Tota Ferrous Wear Debris Fuid Compatibiity: Petroeum, synthetic ois and water/oi Fuid Temperature: -20 to 65 C (-4 to 149 F) Max. Fuid Pressure: 10 Bar (145psi) Options: Stand aone unit, Unit with automatic piston zeroing, Dispay/Aarm box, Power Suppy: VDC Protection: IP65 Range: ppm Uncombined Ferrous Debris 2.2kg (4.85b) Fuid Viscosity: 350cst (Piston Version & Non Zeroing Option) FG-K16344-KW Piston Version FG-K16354-KW Evauation Kit Piston Version, incudes case, power suppy and dispay FG-K16590-KW Non Zeroing Option A sensors come compete with software for data downoading and trending. Contact Kittiwake for information about the wide range of instaation accessories and aternative options that are avaiabe to suit your specific appication. Avaiabe for use in a mutitude of appications Robust cast iron encosure providing strength and magnetic shieding Seaed to IP65 suitabe for industria use Reference coi for controed temperature stabiity LED dispay providing a visua indication of sensor status Wide range of interface options due to variety of industry standard outputs

8 MA-K27471-KW Issue 5 Kittiwake Deveopments Ltd 3-6 Thorgate Road Littehampton West Sussex BN17 7LU United Kingdom Te: + 44 (0) Emai: saes@kittiwake.com Web: