COMPARISON REPORT OF SFSD/TFM WITH AND WITHOUT LATCHES PART DESCRIPTION TFM F-D-WT, TFM F-D-WT. Mated with
|
|
|
- Roger Robertson
- 5 years ago
- Views:
Transcription
1 Prject Number: SFSD/TFM with latch Tracking Cde: TC0716-SFSD/TFM with latch-1332 Requested by: Kevin Meredith Date: 9/10/2008 Prduct Rev: CR and D Part #: TFM F-D-WT, TFM F-D-WT, SFSD F DR-NDS, SFSD F DR- NDS Lt #: na Tech: Tny Wagner Eng: Try Ck Part descriptin: SFSD/TFM Qty t test: 40 Test Start: 4/23/2007 Test Cmpleted: 4/25/2007 COMPARISON REPORT OF SFSD/TFM WITH AND WITHOUT LATCHES PART DESCRIPTION TFM F-D-WT, TFM F-D-WT Mated with SFSD- Page 1 f 17
2 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch CERTIFICATION All instruments and measuring equipment were calibrated t Natinal Institute fr Standards and Technlgy (NIST) traceable standards accrding t IS l and ANSI/NCSL , as applicable. All cntents cntained herein are the prperty f Samtec. N prtin f this reprt, in part r in full shall be reprduced withut prir written apprval f Samtec. SCOPE T perfrm the fllwing tests: Test parts with and withut latches fr cmparisn purpses accrding t SFSD-TFM Latching Test Plan. APPLICABLE DOCUMENTS Standards: EIA Publicatin 364 TEST SAMPLES AND PREPARATION 1) All materials were manufactured in accrdance with the applicable prduct specificatin. 2) All test samples were identified and encded t maintain traceability thrughut the test sequences. 3) After sldering, the parts t be used fr LLCR and DWV/IR testing were cleaned accrding t TLWI ) Either an autmated cleaning prcedure r an ultrasnic cleaning prcedure may be used. 5) The autmated prcedure is used with aqueus cmpatible sldering materials. 6) Parts nt intended fr testing LLCR and DWV/IR are visually inspected and cleaned if necessary. 7) Any additinal preparatin will be nted in the individual test sequences. 8) Slder Infrmatin: Lead Free 9) Re-Flw Time/Temp: See accmpanying prfile. 10) Samtec Test PCBs used: PCB TST-XX Page 2 f 17
3 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch TYPICAL OVEN PROFILE (Sldering Parts t Test Bards) Page 3 f 17
4 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch / FLOWCHARTS SFSD F-3.25-DM-NDS/TFM F-D-WT TEST GROUP A STEP 10 Bards 100 Cycles 01 / 02 Data Review Cycles 04 / 05 Data Review Cycles 07 / 08 Data Review Cycles 10 / 11 Data Review Cycles 13 / 14 Data Review /Un- Frces = EIA / SFSD F-3.25-DM-NDS/TFM F-D-WT TEST GROUP A STEP 10 Bards 100 Cycles 01 / 02 Data Review Cycles 04 / 05 Data Review Cycles 07 / 08 Data Review Cycles 10 / 11 Data Review Cycles 13 / 14 Data Review /Un- Frces = EIA Page 4 f 17
5 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch / SFSD F-3.25-D/TFM F-D TEST GROUP A STEP 10 Bards 100 Cycles 01 / 02 Data Review Cycles 04 / 05 Data Review Cycles 07 / 08 Data Review Cycles 10 / 11 Data Review Cycles 13 / 14 Data Review FLOWCHARTS Cntinued /Un- Frces = EIA / SFSD F-3.25-D/TFM F-D TEST GROUP A STEP 10 Bards 100 Cycles 01 / 02 Data Review Cycles 04 / 05 Data Review Cycles 07 / 08 Data Review Cycles 10 / 11 Data Review Cycles 13 / 14 Data Review /Un- Frces = EIA Page 5 f 17
6 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch ATTRIBUTE DEFINITIONS The fllwing is a brief, simplified descriptin f attributes. MATING/UNMATING: 1) Reference dcument: EIA , and Frces Test Prcedure fr Electrical Cnnectrs. 2) The full insertin psitin was t within t f the plug bttming ut in the receptacle t prevent damage t the system under test. 3) One f the mating parts is secured t a flating X-Y table t prevent damage during cycling. Page 6 f 17
7 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch 5 Psitin RESULTS Frces with Latches Initial Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs After 25 Cycles After 50 Cycles After 75 Cycles After 100 Cycles Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Page 7 f 17
8 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch Frces withut Latches Initial Min lbs Max lbs Min lbs Max lbs After 25 Cycles After 50 Cycles After 75 Cycles After 100 Cycles Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Page 8 f 17
9 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch 20 Psitin Frces with Latches Initial Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs After 25 Cycles After 50 Cycles After 75 Cycles After 100 Cycles Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Page 9 f 17
10 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch Frces withut Latches Initial Min lbs Max lbs Min lbs Max lbs After 25 Cycles After 50 Cycles After 75 Cycles After 100 Cycles Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Min lbs Max lbs Page 10 f 17
11 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch MATING/UNMATING: 5 Psitin DATA SUMMARIES With Latches Initial After 25 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average After 50 Cycles After 75 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average After 100 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average Initial Withut Latches After 25 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average After 50 Cycles After 75 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average After 100 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average Page 11 f 17
12 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch 20 Psitin DATA SUMMARIES Cntinued With Latches Initial After 25 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average After 50 Cycles After 75 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average After 100 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average Withut Latches Initial After 25 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average After 50 Cycles After 75 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average After 100 Cycles Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Minimum Maximum Average Page 12 f 17
13 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch MATING/UNMATING: 5 Psitin DATA With Latches Initial After 25 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) After 50 Cycles After 75 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) After 100 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) The unmates were left blank due t latches being brke. Page 13 f 17
14 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch Withut Latches Initial After 25 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) After 50 Cycles After 75 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) After 100 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Page 14 f 17
15 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch 20 Psitin With Latches Initial After 25 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) After 50 Cycles After 75 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) After 100 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Page 15 f 17
16 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch Withut Latches Initial After 25 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) After 50 Cycles After 75 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) After 100 Cycles Sample# Frce (Oz) Frce (Lbs) Frce (Oz) Frce (Lbs) Page 16 f 17
17 Tracking Cde: TC0716-SFSD/TFM with latch-1332 Part #: TFM F-D-WT, TFM F-D-WT, SFSD- Part descriptin: SFSD/TFM with latch EQUIPMENT AND CALIBRATION SCHEDULES Equipment #: TCT-04 Descriptin: Dilln Quantrl TC mm/min series test stand Manufacturer: Dilln Quantrl Mdel: TC2 I series test stand Serial #: Accuracy: Speed Accuracy: +/- 5% f indicated speed; Speed Accuracy: +/- 5% f indicated speed; Last Cal: 05/18/2007, Next Cal: 05/18/2008 Equipment #: LC-250N (icell)-1 Descriptin: 250 Newtn lad cell fr Dilln Quantrl test stand Manufacturer: Dilln Quantrl Mdel: icell Serial #: Accuracy:.10 % f Capacity Last Cal: 01/18/2008, Next Cal: 01/18/2009 Equipment #: Null Descriptin: Manufacturer: Mdel: Serial #: Accuracy: Last Cal:, Next Cal: Page 17 f 17
MATING/UNMATING COMPARISON REPORT PART DESCRIPTION TEM-1XX-02-DH1-S-D/SEM-1XX-03.0-S-D-WT
Prject Number: Tracking Cde: TC0839-TEM-DH-1979 Requested by: Brandn Harpenau Date: 9/22/2008 Prduct Rev: 1 Lt #: 1 Tech: Rdney Riley Eng: Try Ck Qty t test: 100 Test Start: 9/22/2008 Test Cmpleted: 10/29/2008
DESIGN QUALIFICATION TEST REPORT. LSHM L-DV-A-S-K-TR/ LSHM L-DV-A-S-K-TR DV TO DV 5&10 Position Mating Unmating force LSHM/LSHM
Prject Number: Design Qualificatin Test Reprt Requested by: Ry Lu Date: 5/20/2016 Tech: Peter Chen Qty t test: 64 Test Start: 11/25/2015 Test Cmpleted: 12/10/2015 DESIGN QUALIFICATION TEST REPORT LSHM-110-02.5-L-DV-A-S-K-TR/
USB-B-S-X-X-TH & USBR-B-X-O-TH-R
Prject Number: Tracking Cde: TC068--0952 Requested by: Brandn Harpenau Date: 2/24/2006 Prduct Rev: N/A Lt #: N/A Tech: Try Ck Eng: Brandn Harpenau Qty t test: 10 Test Start: 02/27/2006 Test Cmpleted: 2/27/2006
Mating / Unmating Test Report
Prject Number: / Test Reprt Tracking Cde: TC1007 3189_Reprt_Rev_1 Requested by: Erin Wright Date: 6/4/2010 Prduct Rev: 3 Part #: MMSD-XX-20-S-06.00-S MMTD-XX-20-S-06.00-S Lt #: 0 Tech: Rger Mrris Tny Wagner
Design Qualification Report
Prject Number: Design Qualificatin Reprt Requested by: Eric Mings Date: 11/16/2012 Prduct Rev: AM /Daughter Card Lt #: N/A Tech: Aarn McKim Eng: Eric Mings Qty t test: 32 Test Start: 10/09/2012 Test Cmpleted:
QTE/QSE QSE F-D-A-L/QTE F-D-A-L QSE F-D-A-L/QTE F-D-A-L
Project Number: Supplemental Test Report Tracking Code: TC1021--3401_Report_Rev_2 Requested by: Ben Cooper Date: 9/10/2010 Product Rev: 0 Lot #: na Tech: Gary Lomax Eng: Eric Mings Qty to test: 30 Test
SEAM ELEVATED 12 & 14 mm STACK HEIGHTS MATING/UNMATING TESTING UP TO 100 CYCLES 20 & 50 POSITION / 08 & 10 ROW
Project Number: Tracking Code: TC076 (1254-1257) Requested by: Greg Brown Date: 2/5/2007 Product Rev: F mated with SEAM-XX-07.0-S-XX-2-A Lot #: 1 Tech: Tori Meek Eng: Troy Cook Part description : SEAX
DESIGN QUALIFICATION TEST REPORT SEAF/SEAM SEAF L-10-2-A-K-TR/ SEAM L-10-2-A-K-TR
Prject Number: Design Qualificatin Test Reprt Tracking Cde: 317173_Reprt_Rev_2 Requested by: Catie Eichhrn Date: 12/18/2015 Part #: SEAF-50-05.0-L-10-2-A-K-TR/ SEAM-50-02.0-L-10-2-A- K-TR Tech: Peter Chen
HSEC8/Edge Card HSEC L-PV-4-1-WT/Edge Card
Prject Number: Design Qualificatin Test Reprt Tracking Cde: 335190_Reprt_Rev_1 Requested by: Le Lee Date: 8/22/2014 Tech: Kasn He Test Start: 6/4/2014 Test Cmpleted: 8/20/2014 DESIGN QUALIFICATION TEST
QUALIFICATION TEST REPORT of STRAIN RELIEF OPTION FOR TCSD PART DESCRIPTION TCSD-20-SR
Project Number: Tracking Code: TC0819--1719 Requested by: John Reid Date:06/03/2008 Product Rev: 0 Part #: TCSD-120-SR Lot #: 5/5/2008 Tech: Eric Fox Eng: Troy Cook Qty to test: 30 Test Start: 05/05/2008
PART DESCRIPTION MLE H-DV-A. Mated with FTMH H-DV-A
Project Number: Tracking Code: TC0838-ELP-1942 Requested by: Neal Patterson Date: 11/21/2008 Product Rev: na Lot #: na Tech: Gary Lomax & Rodney Riley Eng: Troy Cook Qty to test: 60 Test Start: 09/15/2008
Design Qualification Test Report SMP-J/SMP-P SMP-J-B-GF-ST-1450\ SMP-P(F/L/S/C)-P-GF-ST-TH2
Project Number: Design Qualification Test Report Tracking Code: 164934_Report_Rev_1 Requested by: John Liao Date: 8/25/2012 Product Rev: 0 Lot #: N/A Tech: Peter Chen Eng: Vico Zhao Qty to test: 32 Test
Design Qualification Test Report Dust & Water RDH/RPBH&ERI8 RCH /RPBH & ERI8-019-S-D-RA DC-RCH-019/RCH
Project Number: Design Qualification Test Report Requested by: Travis Newton Date: 8/12/2013 Tech: Aaron McKim Test Start: 02/22/2012 Test Completed: 09/14/2012 Design Qualification Test Report Dust &
Design Qualification Report HSEC8 HSEC S-DV-A HSEC S-DV-A HSEC S-DV-A
Prject Number: Design Qualificatin Reprt Tracking Cde: 218303_Reprt_Rev 2 Requested by: Eric Mings Date: 11/16/2012 Prduct Rev: AM /Daughter Card Lt #: N/A Tech: Aarn McKim Eng: Eric Mings Qty t test:
1000 Cycle Mechanical Durability Summary Report PART DESCRIPTION QSS L-D-RA /QTS L-D-RA
Project Number: NA Tracking Code: TC0328--0236 Requested by: Mark Shireman Date: 7/8/2003 Product Rev: current Lot #: 589082 Tech: Troy Cook Eng: John Tozier Qty to test: 15 Test Start: 07/16/2003 Test
SSM/TSM SSM-125-L-DV-A/TSM L-DH-A
Prject Number: Design Qualificatin Test Reprt Tracking Cde: 302828_Reprt_Rev_1 Requested by: Catie Eichhrn Date: 12/18/2014 Tech: Peter Chen Qty t test: 100 Test Start: 03/20/2014 Test Cmpleted: 05/13/2014
SMSD/HTSS SMSD F D-KUS/HTSS L-DV
Prject Number: Design Qualificatin Test Reprt Requested by: Hardy Tain Date: 02/16/2016 Tech: Peter Chen Qty t test: 75 Test Start: 09/29/2013 Test Cmpleted: 11/22/2013 DESIGN QUALIFICATION TEST REPORT
QUALIFYING STRAIN RELIEF EXTENSION OF TCMD PART DESCRIPTION TCMD-120-SR
Project Number: Tracking Code: TC0819--1718 Requested by: John Reid Date:06/03/2008 Product Rev: 0 Lot #: 5/5/2008 Tech: Eric Fox Eng: Troy Cook Qty to test: 30 Test Start: 05/05/2008 Test Completed: 5/27/2008
CLT/TMMH CLT L-D-A/TMMH L-DV-A
Prject Number: Design Qualificatin Test Reprt Requested by: Catie Eichhrn Date: 5/5/2015 Tech: Kasn He Test Start: 4/29/2014 Test Cmpleted: 5/27/2014 DESIGN QUALIFICATION TEST REPORT CLT/TMMH CLT-125-02-L-D-A/TMMH-125-05-L-DV-A
EXTENDED LIFE PRODUCTS TEST REPORT PART DESCRIPTION CLT S-D-A/TMMH S-DV-A
Project Number: Requested by: Bryon Saylor Date: 3/31/2009 Product Rev: BD Lot #: 1/8/09 Tech: Rodney Riley, Gary Lomax, & Daniel Linton Eng: Troy Cook /TMMH Qty to test: 60 Test Start: 01/27/2009 Test
ERX8 Durability Report
Project Number: Tracking Code: TC0725--1378 Requested by: Brian Vicich Date: 6/20/2007 Product Rev: Current Lot #: 1546388/143924 Tech: Tony Wagoner/Tori Meek Eng: Troy Cook Qty to test: 10 Test Start:
EXTENDED LIFE TEST REPORT PART DESCRIPTION ERX L-D-RA
Project Number: 23261 Tracking Code: TC0845--2076_ReportRev2 Requested by: Jim Hahn Date: 1/5/2009 Product Rev: See print Lot #: 1 Tech: Gary Lomax & Rodney Riley Eng: Troy Cook Qty to test: 8 Test Start:
SMA/RF316 SMA-J-P-H-ST-EM3/RF316-01SP1-01SP1-0700
Project Number: Design Qualification Test Report Tracking Code: 116049_Report_Rev_3 Requested by: John Liao Date: 6/23/2011 Product Rev: 0 Part #:SMA-J-P-H-ST-EM3/RF316-01SP1-01SP1-0700 Lot #: N/A Tech:
DESIGN QUALIFICATION TEST REPORT. BCS\ TSM BCS-125-L-D-TE\TSM L-DV-A (10u" Gold) BCS-125-S-D-TE\TSM S-DV-A (30u" Gold)
Project Number: Design Qualification Test Report Requested by: Mark Shireman Date: 4/20/2012 Product Rev: N/A Lot #: N/A Tech: Troy Cook Eng: Eric Mings Qty to test: 16 Test Start: 03/15/2012 Test Completed:
Mated with IPBT-110-H1-T-S
Project Number: Requested by: Brandon Harpenau Date: 2/17/2006 Product Rev: 1 Lot #: 0 Tech: Troy Cook/ Tony Wagoner Eng: Dave Scopelliti Qty to test: 50 Test Start: 03/17/2006 Test Completed: 4/20/2006
Breakdown Voltage PART DESCRIPTION. SQW L-D Mated with TMM-1xx-01-S-D
Project Number: NA Tracking Code: TC0344--0303 Requested by: Ty Atkins Date: 10/31/2003 Product Rev: N/A Lot #: N/A Tech: Troy Cook Eng: John Tozier Qty to test: 4 Test Start: 10/31/2003 Test Completed:
LLCR Durability and Gap Measurements (to 500 cycles) with Environmental Stresses Summary Report
Project Number: NA Tracking Code: TC0312--0104 Requested by: Jan Hrouda Date: 3/20/2003 Product Rev: A Lot #: Sample Tech: Troy Cook Eng: John Tozier Part description: 0.8 mm [0.031 ] Right Angled Edge
DESIGN VERIFICATION TEST REPORT ERCDA SS-TD-TU. Mated with ERF L-DV-L
Project Number: Tracking Code: TC0810--1621 Requested by: John Riley Date: 05/27/2008 Product Rev: 0 Part #: ERCDA-25-09.00-1SS-TD-TU Lot #: N/A Tech: Eric Fox & Daniel Borgelt Eng: Troy Cook Qty to test:
Mated with VRDPC M-RA
Project Number: Tracking Code: TC069--0956 Requested by: John Reid Date: 2/28/2006 Product Rev: 2 Lot #: 2/28/06 Tech: Troy Cook/Tony Wagoner Eng: Dave Scopelliti Qty to test: 42 Test Start: 08/10/2006
MEC6-XX-02-XX-D-RA1 DVT Test Report
Project Number: Tracking Code: TC069--0954 Requested by: Richie Gimmel Date: 2/27/2006 Product Rev: 2/27/06 Lot #: 2/27/06 Tech: Troy Cook Eng: Dave Scopelliti Qty to test: 50 Test Start: 03/08/2005 Test
Design Verification Test Report PART DESCRIPTION SEAC TU-TU
Project Number: Design Verification Test Tracking Code: TC0841 2024_Report Rev 2 Requested by: Kevin Meredith Date: 7/22/2009 Product Rev: 0 Lot #: 0 Tech: Rodney Riley Gary Lomax Troy Cook Qty to test:
VPSTP mated with VRDPC M-RA
Project Number: Tracking Code: TC0635--1151 Requested by: John Riley Date: 8/29/2006 Product Rev: 1 Lot #: 99999 Tech: Tony Wagoner Eng: Troy Cook Qty to test: 40 Test Start: 10/05/2006 Test Completed:
DVT PART DESCRIPTION EQDP TTR-STL-1
Project Number: NA Tracking Code: TC0412--0394 Requested by: John Reid Date: 3/17/2004 Product Rev: 0 Lot #: 03/17/04 Tech: TR & TC Eng: John Tozier Qty to test: 15 Test Start: 04/14/2004 Test Completed:
Representative Sample, MMS-105 depicted. CCC Report PART DESCRIPTION MMS L-DV. Mated with TMM S-D-SM
Project Number: na Tracking Code: TC0332--0246 Requested by: Mark Shireman Date: 8/7/2003 Product Rev: N/A Lot #: N/A Tech: Troy Cook Eng: John Tozier Qty to test: 2 Test Start: 08/07/2003 Test Completed:
PCIEC/PCIE PCIEC EC-EC-AP/PCIE F-D-RA
Project Number: Design Qualification Test Report Tracking Code: 346583 _Report_Rev_2 Requested by: Liam Parkes Date: 1/15/2015 Tech: Qty to test: 14 Test Start: 10/31/2014 Test Completed: 12/9/2014 (Actual
EQRP TTR-STL-1 & QRF L-D-DP-A-K & QRM L-D-DP-A-K
n Project Number: Design Verification Test Report Tracking Code: TC0948--2932_Report_Rev_1 Requested by: John Riley Date: 7/1/2010 Product Rev: 0 / QRF8-018-05.0-L-D-DP-A-K/ QRM8-018-05.0-L-D-DP-A-K Lot
SAMTEC POWER CHARACTERIZATION
Project Number: Tracking Code: _Rev4 Requested by: Bryon Saylor Date: 6/12/2013 Product Rev: J Part #: SFSD-30-28-S-3.25-D/TFC-130-01-L-D Lot #: 06/23/2008 Tech: Tony Wagoner Eng: Dave Scopelliti Part
CRIMP HEIGHT CHARACTERIZATION SUMMARY REPORT
Project Number: Crimp Characterization Testing Tracking Code: 190661 Requested by: Bryon Saylor Date: 08/04/2012 Product Rev: 1 Lot #: NA Tech: Linda Wang Eng: Vico Zhao Qty to test: 200 Test Start: 04/12/2012
DVT Report PART DESCRIPTION SAL S-S-A
Project Number: na Tracking Code: TC427--481 Requested by: John Reid Date: 7/2/24 Product Rev: 3 Lot #: 7/2/24 Tech: Troy Cook Eng: John Tozier Qty to test: 5 Test Start: 9/8/24 Test Completed: 2/1/25
Phase B DVT testing PART DESCRIPTION EQCD DV-EM
Project Number: NA Tracking Code: TC0345--0309 Requested by: John Reid Date: 11/4/2003 Product Rev: 5 Lot #: 11/4/2003 Tech: TC & TR Eng: John Tozier Qty to test: 50 Test Start: 01/21/2004 Test Completed:
CCC PART DESCRIPTION. CLT Mated with TMM
Project Number: Customer Requested by: Mark Shireman Date: 12/9/2003 Product Rev: Current Lot #: Stock Tech: Troy Cook Eng: John Tozier Part description: CLT-150-02-L-D/TMM-150-01-S-D-SM Qty to test: 3
DVT Report for PCIE-XXX-02-F-D-TH. Mated with Mating PCB Card
Project Number: Requested by: Brandon Harpenau Date: 9/26/2005 Product Rev: 3 Lot #: 1 Tech: Troy Cook Eng: Mark Shireman Qty to test: 20 Test Start: 11/12/2005 Test Completed: 12/9/2005 DVT Report for
DESIGN QUALIFICATION TEST REPORT ECUE/UEC5 ECUE C1-FF-01-1/UEC H-D-RA-1-A
Project Number: Design Qualification Test Report Requested by: Liam Parkes Date: 8/25/2016 Tech: Aaron McKim Test Start: 12/10/2015 Test Completed: 12/25/2015 DESIGN QUALIFICATION TEST REPORT ECUE/UEC5
DVT PART DESCRIPTION HQCD STR-TEU-1
Project Number: NA Tracking Code: TC043--0347 Requested by: John Reid Date: 1/13/2004 Product Rev: 4 Lot #: 1/13/2004 Tech: T. Receveur Eng: J. Tozier Qty to test: 55 Test Start: 3/29/2004 Test Completed:
UEC5/CARD UEC H-D-RA-1-A/Edge Card
Project Number: Design Qualification Test Report Tracking Code: 333693_Report_Rev_2 Requested by: Corey Rose Date: 12/24/2014 Tech: Craig Ryan Qty to test: 75 Test Start: 05/20/2014 Test Completed: 06/10/2014
Phase B DVT testing PART DESCRIPTION. EQCD -DV to DV, phase B DVT testing. Mated with QTE
Project Number: Tracking Code: TC0345--0308 Requested by: John Reid Date: 11/4/2003 Product Rev: 5 Lot #: 11/4/03 Tech: TC & TR Eng: John Tozier Qty to test: 50 Test Start: 01/21/2004 Test Completed: 3/2/2004
SEAC DISCRETE TWINAX CABLE TYPE QUALIFICATION TEST REPORT SEAC/SEAF SEAC TU-TU-2/SEAF L-06-2-RA-LP-TR
Project Number: Design Qualification Test Report Tracking Code: 346584_Report_Rev_1 Requested by: Liam Parkes Date: 1/29/2015 Tech: Aaron Mckim Test Start: 8/15/2014 Test Completed: 1/19/2015 (Actual part
ERF8/ERM8 ERF L-DV-TR/ERM L-DV-TR
Project Number: Design Qualification Test Report Tracking Code: 284642_Report_Rev_1 Requested by: Catie Eichhorn Date: 12/17/2015 Tech: Aaron McKim Qty to test: 105 Test Start: 09/10/2014 Test Completed:
SAMTEC POWER CHARACTERIZATION
Project Number: Tracking Code: Power Report Rev 3 Requested by: Eric Mings Date: 5/29/2013 Product Rev: AE Part #: MMSD-25-20-L-12.00-D-K-LUS Tech: Tony Wagoner Eng: Eric Mings Part description: 0.100[0.254]
Design Verification Test Report PART DESCRIPTION UPT L-V-LC / UPS L-V-LC
Project Number: Design Verification Test Tracking Code: TC0923 2522_Report_Rev_2 Requested By: John Reid Date: 5/30/2013 Product Rev: 6/02/09 Part #: UPT-08-03.0-01-L-V-LC / UPS-08-04.0-01-L-V-LC Lot #:
Design Qualification Test Report SMS/TMS SMS L-D/TMS L-D
Project Number: Design Qualification Test Report Tracking Code: 147211_Report_Rev_1 Requested by: Joe Smallwood Date: 11/11/2011 Product Rev: 0 Lot #: N/A Tech: Peter Chen Eng: Vico Zhao Qty to test: 45
DVT PART DESCRIPTION HHSC TD-SE
Project Number: NA Requested by: John Reid Date: 11/4/2003 Product Rev: 3 Lot #: 11/5/03 Tech: TC & TR Eng: John Tozier Qty to test: 50 Test Start: 01/21/2004 Test Completed: 3/2/2004 DVT PART DESCRIPTION
Design Qualification Test Report T1M/SISS T1M-20-T-S-V / S1SS T-06.00
Project Number: Design Qualification Test Report Tracking Code: 144976_Report_Rev_3 Requested by: Steven Xu Date: 1/10/2014 Tech: Peter Chen Qty to test: 45 Test Start: 5/25/2011 Test Completed: 8/30/2011
CES/TSW CES L-D/TSW L-D
Project Number: Design Qualification Test Report Tracking Code: 231879_Report_Rev_1 Requested by: Catie Eichhorn Date: 6/13/2013 Product Rev: Tech: Peter Chen Eng: Vico Zhao Qty to test: 65 Test Start:
MEC8/Edge card MEC L-VP/Edge Card
Project Number: Design Qualification Test Report Requested by: Hardy Tan Date: 5/14/2013 Product Rev: 0 Lot #: N/A Tech: Peter Chen Eng: Vico Zhao Qty to test: 80 Test Start: 10/1/2012 Test Completed:
SIB/PCB SIB F-S-LC/PCB
Project Number: Design Qualification Test Report Tracking Code: 233517_Report_Rev_3 Requested by: Catie Eichhorn Date: 2/28/2015 Tech: Craig Ryan Qty to test: 65 Test Start: 12/17/2012 Test Completed:
Design Qualification Test Report SIR1. SIR1-15-L-S-A\ SIR1-Mating Board
Project Number: Design Qualification Test Report Requested by: Leo Lee Date: 12/01/2010 Product Rev: 0 Lot #:1 Tech: Kason He Eng: Vico Zhao Part description: SIBF Qty to test:40 Test Start: 11/15/2010
DESIGN QUALIFICATION TEST REPORT ZA1/PCB ZA Z-10/ MATING PCB
Project Number: Design Qualification Test Report Tracking Code: 490100_Report_Rev_2 Requested by: Joe Smallwood Date: 5/6/2015 Part #: ZA1-30-02-1.00-Z-10/ MATING PCB Tech: Aaron McKim Test Start: 02/20/2015
Design Verification Test Report PHT/PHF PHT L-D/PHF L-D
Project Number: Design Verification Test Report Tracking Code: TC1023--3437_Report_Rev_3 Requested by: Steven Xu Date: 09/13/2010 Product Rev: 0 Lot #:1 Tech: Kason He Eng: Vico Zhao Qty to test: 60 Test
Release Notes for SAP enhancement package 7 for SAP ERP 6.0, Support Package 2
Release Ntes fr SAP enhancement package 7 fr SAP ERP 6.0, Supprt Package 2 What's New? Release Ntes Cpyright 2013 SAP AG r an SAP affiliate cmpany. All rights reserved. N part f this publicatin may be
Solder Joint Reliability Summary Report PART DESCRIPTION. DPAM H-8-1 mated with DPAF H CERTIFICATION
Project Number: SJR Tracking Code: TC054-SJR-0604 Requested by: Jeremy Wooldridge Date: 1/21/2005 Product Rev: 4 Lot #: 12/24/04 Tech: Troy Cook Eng: Dave Scopelliti Qty to test: 64 Test Start: 03/15/2005
DESIGN QUALIFICATION TEST REPORT EBTS/EPTM/EBTT/EBTF EPTS-2-P-D-VT-01/EBTM S-VT-1/EPTT-2-P-11.5-D-RA/EBTF S-RA-1
Project Number: Design Qualification Test Report Tracking Code: 794601_Report_Rev_1 Requested by: Chad Humphres Date: 11/7/2016 / Tech: Tony Wagoner Test Start: 3/9/2016 Test Completed: 5/5/2016 (Actual
Integration of SAP TM with SAP Global Trade Services
SAP Transprtatin Management Integratin f SAP TM with SAP Glbal Trade Services CUSTOMER Dcument Versin: 2.1 December 2013 SAP AG 1 Cpyright Cpyright 2013 SAP AG. All rights reserved. SAP Library dcument
SFM/FTSH SFM-125-T2-L-D-A/FTSH L-DV-A
Project Number: Design Qualification Test Report Tracking Code: 242469_Report_Rev_1 Requested by: Catie Eichhorn Date: 07/19/2013 Tech: Peter Chen Qty to test: 65 Test Start: 05/20/2013 Test Completed:
DVT Summary Report PART DESCRIPTION IPD S-D-XX-24/IPL S-D
Project Number: Tracking Code: TC0249--0057 Requested by: Jeremy Wooldridge Date: 12/2/2002 Product Rev: 1 Lot #: N/A Tech: Troy Cook Eng: John Tozier Qty to test: 25 Test Start: 12/13/2002 Test Completed:
DVT. Summary Report (Old TC ) PART DESCRIPTION FFMD-25-D-2-01-F
DVT. Summary Report (Old TC0240--0759) PART DESCRIPTION FFMD-25-D-2-01-F File: J:\QA LAB\Test Programs\TC0240---0759\TC0240-NA-0017.doc Form 01 Rev 01 Page 1 of 52 CERTIFICATION All instruments and measuring
Release Notes for SAP enhancement package 7 for SAP ERP 6.0, Support Package 2. Information Lifecycle Management
Release Ntes fr SAP enhancement package 7 fr SAP ERP 6.0, Supprt Package 2 Infrmatin Lifecycle Management Cpyright 2013 SAP AG r an SAP affiliate cmpany. All rights reserved. N part f this publicatin may
Release Notes for SAP enhancement package 7 for SAP ERP 6.0, Support Package Stack 03. SD Sales and Distribution
Release Ntes fr SAP enhancement package 7 fr SAP ERP 6.0, Supprt Package Stack 03 SD Sales and Distributin Cpyright 2014 SAP AG r an SAP affiliate cmpany. All rights reserved. N part f this publicatin
Specification Dry Good Packaging and Delivery Requirements SU-009 version 1
Prepared By: Vinpac Internatinal s Quality Assurance Team Date f Issue: 30 May 2016 This is a cmpliance dcument fr circulatin t custmers, manufacturers and suppliers. Please make sure the apprpriate peple
MILITARY MARKING (MIL-STD-129P)
Prject Cde Shelf-life MILITARY MARKING (MIL-STD-129P) Marking permits ready identificatin f military supplies and equipment fr shipment and strage. Marking is required t assist ur dept persnnel srt shipments
PRODUCT PROFILE ELECTROLOY LEAD FREE BAR
PRODUCT PROFILE ELECTROLOY LEAD FREE BAR Prduct Name Prduct Cde SOLDER BAR LEAD FREE ALLOY Sn99.0/Ag0.3/Cu0.7+Bi LF- 315XB LEAD FREE ALLOY Sn99.7/Ag0.3+Bi LF- 315XBE (TOP UP ALLOY) The infrmatin and statements
Integration of SAP TM and SAP CRM
SAP Transprtatin Management Integratin f SAP TM and SAP CRM CUSTOMER Dcument Versin: 1.0 December 2013 SAP AG 1 Cpyright Cpyright 2013 SAP AG. All rights reserved. SAP Library dcument classificatin: PUBLIC
Regulations Amending the Food and Drug Regulations (1475 Good Manufacturing Practices)
Canada Gazette: Vl. 147, N. 10 May 8, 2013 Registratin SOR/2013-74 April 26, 2013 FOOD AND DRUGS ACT Regulatins Amending the Fd and Drug Regulatins (1475 Gd Manufacturing Practices) P.C. 2013-420 April
AUGUST 14, 2006 TEST REPORT # RANDOM VIBRATION TEST SERIES PROBE SERIES PROBE TEST SOCKET INTERCONNECT DEVICES, INC.
AUGUST 14, 2006 TEST REPORT #206271 RANDOM VIBRATION TEST 101377-000 SERIES PROBE 204130-036 SERIES PROBE TEST SOCKET INTERCONNECT DEVICES, INC. APPROVED BY: MAX PEEL SENIOR FELLOW CONTECH RESEARCH, INC.
SOLDER JOINT RELIABILITY TEST SUMMARY
Project Number: SJR Tracking Code: TC0623-SEAF-SJR-1059 Requested by: Jeremy Wooldridge Date: 05/20/2008 Product Rev: D (SEAF), C (SEAM) Part #: SEAF-50-5.0-S-10-2-A/ SEAM-50-2.0-S-10-2-A SEAF-50-6.5-S-10-1-A/
Revision Date: May Paragraph Table of Contents Page. 1.0 Scope Purpose Overview of Steps Approving an MRA Document 5
f 6 Dcument Owner: Justin Lee Owners Department: Supply Chain Management Paragraph Table f Cntents Page.0 Scpe 3 2.0 Purpse 3 3.0 Respnsibilities 3 4.0 MRA Term Definitins 3 5.0 Overview f Steps Apprving
Concur Travel QuickStart Guide. Concur Technologies. Version 1.0
Cncur Travel QuickStart Guide Cncur Technlgies Versin 1.0 August 22, 2014 Dcument Revisin Histry Date Descriptin Versin Authr 08/22/2014 Cncur Travel QuickStart Guide 1.0 Cncur Prprietary Statement These
PRODUCT PROFILE. SN100CLe
PRODUCT PROFILE ELECTROLOY in partnership with FCT Asia Pte Limited in Manufacturing Nihn Superir Lead Free Slder Bar SN100CL Prduct Name Prduct Cde LEAD FREE BAR LEAD FREE BAR (TOP UP ALLOY) SN100CL SN100CLe
QSE/QTE QSE L-D-A/QTE L-D-A
Project Number: Design Qualification Test Report Tracking Code: 168830_Report_Rev_4 Requested by: Eric Mings Date: 1/3/2014 Product Rev: BA Lot #: N/A Tech: Peter Chen Eng: Vico Zhao Qty to test: 45 Test
Release Notes. for the Business Function. SAP for Insurance: Collections/Disbursements 5 (INS_FSCD_CI_5)
SAP fr Insurance Release Ntes fr the Business Functin SAP fr Insurance: Cllectins/Disbursements 5 (INS_FSCD_CI_5) SAP enhancement package 7 fr SAP ERP 6.0, Supprt Package 2 CUSTOMER Dcument Octber 2013
Oracle Project Portfolio Management Integration Pack for Primavera P6 and Oracle E-Business Suite Release Notes
Oracle Prject Prtfli Management Integratin Pack fr Primavera P6 and Oracle E-Business Suite 3.1 - Release Ntes Release 3.1 Part N. E20583-03 January 2012 Oracle Prject Prtfli Management Integratin Pack
SEWAGE SYSTEM PERMIT APPLICATION INSTRUCTIONS FOR COMPLETION
SEWAGE SYSTEM PERMIT APPLICATION INSTRUCTIONS FOR COMPLETION Incmplete applicatins will nt be prcessed. Accepted applicatins must include the fllwing cmpleted frms: Prvincial Frms: Applicatin t Cnstruct
Business Requirements Specification
Business Requirements Specificatin Cngestin Revenue Rights Auctin Efficiency Track 1A Dc ID: GNFDMDEHU6BB-46-53 Page 1 f 15 Disclaimer All infrmatin cntained in this draft Business Requirements Specificatin
TG 19 SOUTH AUSTRALIAN WATER CORPORATION
TG 19 SOUTH AUSTRALIAN WATER CORPORATION TECHNICAL GUIDELINE Checklist: Water Netwrk Requirements fr Land Develpment Applicatins Issued by: Principal Engineer Water & Wastewater Netwrks Issue Date: SA
The purpose of IPRO 304 is to create a software package to assist A. Finkl & Sons in tracking of parts in heat treatment furnaces.
Prject Plan Reprt: Heat Treat Subgrup 1.0 Objective The purpse f IPRO 304 is t create a sftware package t assist A. Finkl & Sns in tracking f parts in heat treatment furnaces. Objective fr Spring 2008:
ICP Linking and Fusing Service Enquiry Procedure
UK Pwer Netwrks ICP Linking and Fusing Service Enquiry Prcedure Owner Name Title Neil Clarke Head f Highway Services Signature Date 03 April 2018 Authriser Name Title Kevin Newnham Majr Prgrammes & ICP
SOURCE INSPECTION QUALITY MANAGEMENT PLAN
SOURCE INSPECTION QUALITY MANAGEMENT PLAN Campus Parkway / State Rute 140 Prject BAR REINFORCEMENT APPENDIX I Table f Cntents 1 GENERAL... 3 1.1 Certificatins... 3 1.1.1 Black Bar Reinfrcement... 3 1.1.2
FAST GUIDE TO PRICES AND ORDERING HOW TO CALCULATE PRICES AND PLACE AN ORDER
Page 1 f 6 HOW TO CALCULATE PRICES AND PLACE AN ORDER SERVICES Eurcircuits ffer 4 pling services, PCB prt, STANDARD pl, TECH pl and IMS pl, and 1 nn-pling service On demand. PCB prt: dedicated service
Permit Application Guide For a Garage, Gazebo, Sauna, Pump House or Shed
Permit Applicatin Guide Fr a Garage, Gazeb, Sauna, Pump Huse r Shed The fllwing pages cntain the permit applicatin, as well as ther frms that may be required fr yur permit applicatin. Apprvals required:
Inquiry processing. 1. Purpose. 2. Scope. 3. Description
1. Purpse T describe the assessment f inquiry dssiers submitted t ECHA accrding t Article 26(1) f the REACH Regulatin and the steps taken t ensure that the data sharing amng ptential and previus registrants
ACX Advanced Ceramic X
AT7020 Series Multilayer Chip Antenna Features Mnlithic SMD with small, lw-prfile and light-weight type. Wide bandwidth RHS cmpliant Applicatins Lw pwer radi applicatins fr 902~928MHz. Specificatins Part
PROFESSIONAL DESIGNATIONS AWARDED BY SAQA RECOGNISED PROFESSIONAL BODIES
PROFESSIONAL DESIGNATIONS AWARDED BY SAQA RECOGNISED PROFESSIONAL BODIES Name f Prfessinal Bdy Designatin Title The Institute fr Timber Cnstructin Suthern Africa (ITC-SA) Certified Timber Rf Truss Designer
Disaster Recovery Planning Guide
Disaster Recvery Planning Guide Disaster Recvery Planning Guide A Business Cntinuity Plan (BCP) is a written strategy which ensures that persnnel and assets are prtected and able t functin in the event
M. Conner Name: A 1/60 scale model truss bridge is to be designed and built using standard file folders.
M. Cnner Name: Date: Perid: Prblem Statement: A 1/60 scale mdel truss bridge is t be designed and built using standard file flders. Design Requirements: The scale mdel must be a truss with a ttal span
The BLOOM Performance Review Decision Guide
The BLOOM Perfrmance Review Decisin Guide Intrductin Planning yur perfrmance review prcess needs careful cnsideratin. Sme questins yu might be cnsidering are: 1. Hw ften will the rganizatin cmplete frmal
PÖTTINGER Information - Configuration
PÖTTINGER Infrmatin - Cnfiguratin Shrt Manual fr PÖTIC in Online- and Offline-Mde This material is intended fr the staff in the Distributin netwrk f PÖTTINGER Versin January 2016 General infrmatin: PÖTIC