PRECISA 201 SG page 3-13 PRECISA 420 PH pages 3-14 & MT 603 SH pages 3-16 & 3-17
|
|
- Agatha Gilmore
- 5 years ago
- Views:
Transcription
1 CHAPTER welding Introduction pages - & - WELDING Transformer technology power sources EASYMIG / 0 DUAL page - MAXISTAR 0 MEC / 00 M / 0 T page - BLUMIG C / C / C / C page - BLUMIG AUTOMOTIVE page -9 Torch TM T for BLUMIG AUTOMOTIVE page -0 BLUMIG S / 0 S / 0 SH page - TF 00 / 00 / 00H (wire feeders for BLUMIG S) page - Inverter technology power sources PRECISA 0 SG page - PRECISA 0 PH pages - & - Thyristor technology power source MT 0 SH pages - & - Options and accessories Rollers for wire feeders page - WELDING EQUIPMENT TORCHES WMT range page -9 Wear parts for torches pages -0 & - -
2 Welding Process A TYPICAL MANUAL WELDING INSTALLATION mask protective clothing fume extraction pressure regulator/ flowmeter work piece earth clamp gas power source with wire feeder torch harness earth cable Torch METAL TRANSFER MODE Nozzle Contact tip Gaseous protection Electrode wire Welding Process The welding processes use an arc under gaseous protection. The electrode is a metallic wire. The electrode, the metal transferred in the arc and the weld bead are protected from the atmosphere by an inert gas for MIG welding and an active gas for MAG welding. Molten weld pool Weld bead The definition explains the names MIG (Metal Inert Gas) and MAG (Metal Active Gas). In manual welding this process is called semi-automatic because the wire is fed automatically as soon as the arc starts. -
3 LEXICON SELF positions: SEMI- AUTOMATIC WELDING SELF role: - used in short-circuit mode, - limits the short-circuit current, - the higher the SELF, the colder, the weld bead. Ω Small SELF Used for bigger sections ΩΩ Big SELF Used for medium sections ARC is smooth Lower welding speed ΩΩΩ Total SELF ARC is very smooth Possible to use CO gas MIG (Metal Inert Gas): Arc welding process with a consumable wire. This wire is transferred in the arc and the molten metal is deposited in the molten pool, protected by an inert gas. MAG (Metal Active Gas): Same description as MIG but the gas protection is active (CO or argon + CO mixture). MIG pulse: The current varies during welding, the power supplies a very precise shape wave. Pulse is primarily used for stainless steel and light alloys. Synergic MIG: The welding parameters are programmed in the power source set for a common evolution according to a predefined law. One single setting is needed which facilitates the use of those machines and improves the welding quality. Times mode: Welding starts by pulling the torch s trigger. It stops by releasing the trigger. Spot mode: The power source starts to weld when the trigger is pulled, but welding stops automatically after a pre-set delay. Intermittent mode: This is a point mode which is repeatable. If the pressure on the trigger is maintained, welding will be re-started after another delay which is also regulated. WELDING EQUIPMENT -
4 : single-phase range PRECISA 0 SG BLUMIG C MAXISTAR 0 MEC 00 M EASYMIG Welding current DUAL 0 DUAL A 0 A 0 A 0 A 00 A 0 A : three-phase range PRECISA 0 PH MT 0 SH BLUMIG S S 0 S 0 S/SH BLUMIG C C C C BLUMIG AUTOMOTIVE MAXISTAR Welding current 0 T 00 A 0 A 0 A 0 A 0 A 0 A 00 A 00 A 0 A -
5 PRECISA 0 PH THE CLASS LEADER INNOVATION QUALITY AT THE RIGHT PRICE SAFETY MIG/ MAG WELDING EQUIPMENT WELDING EQUIPMENT -
6 Compact equipment for welding. Transformer technology. Single-phase input voltage. EASYMIG / 0 DUAL The EASYMIG range is used for smaller jobs requiring light weight and compact equipment, which is easy to use. Available for use: with or without gas, the EASYMIG units are equipped with the essential accessories needed for immediate use. Input voltage: 0 V single-phase. Wire feeder device: rollers. Simple: adjustment of the current with a switch and of the wire feed speed with a single knot control. Versatile: EASYMIG DUAL for welding with steel, stainless steel and aluminium solid wires as well as gasless cored wires. Complete: delivered with torch and all accessories for immediate use. Portable: equipped with handle and wheels for easier movement. 00- Standards EN 09- EN 09-0 PORTABLE FOR MAINTENANCE OPERATIONS 00- Handle for transport. On/off switch. Power switch. Wire feed setting. Primary cable. Earth cable. Built-in torch. 00- TECHNICAL CHARACTERISTICS: EASYMIG DUAL EASYMIG 0 DUAL Input voltage 0 V - single-phase (0/0 Hz) Input power. kva -. kw. kva -. kw Max input current A A Effective input current. A 0. A Open circuit voltage 0 - V - V Welding current range 0 - A 0-0 A at % A 0 A (%) Duty cycle at 0 % 0 A A at 0 C at 00% A 0 A Adjustment positions Protection index IP Dimensions 0 x 0 x 0 mm 0 x 0 x 0 mm Weight. kg kg TO ORDER: Power source complete with torch W000 W000 Wear parts for torches see pages -0 & - Wire-feeder roller see page - Delivered equipped with: electric primary cable, equipped earth cable, and built-in torch, handle and wheels roller plate, safety instructions, user manual. -
7 Compact equipment for welding. Transformer technology. Single-phase (M) or three-phase (T) input voltage. MAXISTAR 0 MEC / 00 M MAXISTAR 0 T MAXISTAR is a range of semi-automatic welding equipment. Used for welding applications in workshops or for outdoor work. Input voltage: 0 V single-phase or 00 V three-phase. Mode: continuous or tack welding. Wire feeder: roller plate. Simple: adjustment of the current with a switch and of the wire feed speed with a single knob control. Versatile: for welding with steel, stainless steel and aluminium wires. Reliable: air cooled transformer. 00- TECHNICAL CHARACTERISTICS: Thermal safety indicator. Switch on/off. Power switch. Tack welding adjustment. Stick-out adjustment. Starting speed regulation. Wire feed speed. European connection for torch. COMPACT MACHINES FOR LIGHT APPLICATIONS Standards EN 09- EN MIG/ MAG WELDING EQUIPMENT WELDING EQUIPMENT MAXISTAR MAXISTAR MAXISTAR 0 MEC 00 M 0 T Input voltage 0 Hz 0 V - single-phase 00 V - three-phase Input power kva -. kw.9 kva -. kw.9 kva -. kw Max input current A A A Effective input current 0. A A. A Adjustment positions Open cicruit voltage - V - V - V Welding current 0-0 A - 0 A - 00 A Wire diameter mm mm mm Duty cycle at 0% 0 A (%) 0 A (%) 00 A (%) at 0 C at 0% A 00 A 0 A at 00% 0 A A 00 A Protection index IP IP Dimensions (mm) 0 x 0 x 0 Weight. kg kg kg TO ORDER: Power source only W000 W000 W000 Options Reverse polarity kit W00099 Torches see pages -9, -0 & - Rollers see page - Delivered equipped with: electric primary cable, equipped earth cable, roller plate for wire sizes mm,.0 -. mm, safety instructions, user manual. -
8 Compact equipment for welding. Transformer technology. Single-phase or three-phase input voltage. BLUMIG C - (single-phase) C / C / C - (three-phase) The BLUMIG range of welding equipment is robust and powerful, providing the best performance on the market. It will meet all your needs. Input voltage: 0 V single-phase and 0-00 V three-phase. Mode: T / T / tack welding. Wire feeder: roller plate. Simple: adjustment of the current with a switch and of the wire feed speed with a single knob control. Digital display: included on the BLUMIG and an option for other models. Versatile: range of gases. Reliable: air cooled transformer. Self adjusting control board. COMPACT MACHINES FOR INTENSIVE USE 00- Standards EN 09- EN TECHNICAL CHARACTERISTICS: 00- Torches see pages -9, -0 & - Rollers see page - Selection T / T / tack welding. Tack welding adjustment. Displays. Stick-out adjustment. Wire speed. Starting speed adjustment. 9 Power switch. Switch on/off. European connection for torch. Delivered equipped with: electric primary cable, equipped earth cable, rollers mm, safety instructions, user manual. TO ORDER: BLUMIG C BLUMIG C BLUMIG C BLUMIG C Input voltage 0 V single-phase 0-00 V three-phase Input power. kva -. kw. kva - kw 0. kva - 9 kw. kva -. kw Max input current A 9 - A - A - 9 A Effective current 9 A 0 - A - 9 A 0 - A Adjustment positions 0 0 Open circuit voltage - V - V - 0 V - V Welding current range 0 A - 0 A A - 0 A A - 0 A A - 0 A Wire diameter mm mm mm mm at 0% 00 A (%) 00 A 0 A 00 A (%) Duty cycle at 0% 0 A 0 A 0 A 0 A at 0 C at 00% 00 A 0 A 0 A 0 A Protection index IP Dimensions (mm) 00 x 0 x 90 0 x 90 x 990 Weight kg kg 0 kg 9 kg Power source only W0009 W000 W0009 W0000 Options Reverse polarity kit W00099 Digital display W
9 Compact installations with integrated wire-feeders for semi-automatic welding. BLUMIG AUTOMOTIVE The AUTOMOBILE specialist, fitted with two torches with 0 degree swan neck swivel spouts. This equipment is designed for the repair and assembly of all types of steel. Constant control of the welding current permits fine adjustment and the various self levels guarantee smooth welding. Mode: stroke / stroke / Point / Intermittent. Reeling: plates, rollers (possibility of a spool gun). Anti-adhesion. Constant control of wire speed. Equipped with a -cylinders support (M0). TECHNICAL CHARACTERISTICS: Main power supply TO ORDER: Power source only W0009 Options TM T m torch W00000 Spool Gun option W0009 m Spool Gun - SG 0 W0009 BLUMIG AUTOMOTIVE 00 V three-phase Regulating position 0 Open circuit voltage Welding current range Duty cycle (0 min cycle at 0 C) at 0% Wire diameter - 0 V 0-00 A A mm (occasionally. mm) Protection class IP Insulation class Weight Dimensions H kg 0 x 0 x 00 mm 00-0 Delivered equipped with: power cable, equipped earth cable, plates rollers for mm wire, a safety, user and maintenance manual. NEW Standards EN 09. EN 09. EN 09.0 MIG/ MAG WELDING EQUIPMENT WELDING EQUIPMENT WEAR PARTS: Wire guide Wire guide Rollers Rollers profile Entrance Intermediate Exit Ø wire (mm) Steel Aluminium FeFlux - FCW W000 W W W W W W W W W W W W W0009 W0009 W0000 W0000 W000 W000 W000 W000 W000 W000 W000 W000-9
10 MIG-MAG torches with orientable 0 swan neck. Torch TM T for BLUMIG AUTOMOTIVE Small and easy to hold with well designed handle. 0 swan neck swivel spout, excellent for welding in position. NEW TECHNICAL CHARACTERISTICS: TM T Air cooling air Rated M mixed gas (DIN EN 9) 0 A current CO 0 A Duty cycle 0% Voltage class L V Wires used 0. to.0 mm Gas supply mini: 0 l/min - maxi: l/min Original Contact tube Mx - 0. Ac equipment mounted Nozzle Ø mm on the torch Liner Ac Weight 0.9 kg Reference Length m TM T W00000 WEAR PARTS: REP TM T Reference spiral steel Ø mm / m (blue) W liner Ø.0 -. mm / m (red) W Ø mm W Nozzle Ø mm W0000 -P point W0000 Contact tube Mx Steel Ø 0. mm Steel Ø 0. mm Steel Ø.0 mm W0000 W0000 W0000-0
11 Equipment with separate wire feeders for welding. Transformer technology. Three-phase input voltage. 00- BLUMIG S BLUMIG 0 S / 0 SH The BLUMIG range of welding equipment is robust and powerful, providing the best performance on the market. It will meet all your needs. Input voltage: 0 V - 00 V three-phase. Mode: T / T / tack welding. Wire feeder: roller plate. Perfect starting: 9 possibility to adjust the starting speed. Selection T / T / tack welding. Tack welding adjustment. Wire speed. Stick-out adjustment. Starting speed regulation. Digital displays. TECHNICAL CHARACTERISTICS: Stick-out: adjustable with a potentiometer. Simple: adjustment of the current with a switch and of the wire feed speed with a single knot control. Digital display: precise adjustment and optimal reading (standard with /0). Versatile: for all solid or flux cored wires. Powerful: air cooled transformer. Safety: protection class IP. Ergonomic design: due to its pivoting wire feed unit support. 9 SEPARATE WIRE FEEDER HEAVY DUTY European connection for torch Power and on/off switch. Power switch (precise adjustment). BLUMIG S BLUMIG 0 S BLUMIG 0 S BLUMIG 0 SH Compatible wire feeders TF 00 TF 00 TF 00H Input voltage 0 Hz 0 V - 00 V three-phase Input power. kva -. kw. kva - kw kva - 0 kw Max input current - 9 A - A 0 - A Effective input current 0 - A - A - 0 A Adjustment positions 0 0 Open circuit voltage - V - V 9 - V Welding current 0-0 A - 00 A 0-00 A Wire diameter mm mm mm Duty cycle at % 00 A 0 A 0 A at 0 C at 0% 0 A 0 A A at 00% 0 A 0 A 0 A Protection index IP Dimensions (mm) 00 x 0 x x 0 x 00 Weight 9 kg 0 kg 0 kg 00- Wire feeder see page - Torches see pages -9, -0 & - Rollers see page - Standards EN 09- EN 09-0 MIG/ MAG WELDING EQUIPMENT WELDING EQUIPMENT TO ORDER: Power source only W000 W000 W000 W000 Cooler unit W000 Liquid for cooling unit W000 Options Digital display feeder standard on power source standard on wire Delivered equipped with: electric primary cable, equipped earth cable, safety instructions, user manual. -
12 Wire feeder with cables for BLUMIG S power sources. TF 00 (air) / 00 (air) / 00H (water) The TF wire feeders are compatible with all the power sources in the BLUMIG S range. Delivered as standard with an insulated cable. WIRE FEEDER 00-9 Sealed structure: protection of the wire feeding system. Digital display: A/V included on TF 00 and TF 00H. Ergonomic design: adjustment on the front panel, and pivoting wire feed unit support for easier storage and orientation of the wire feeders. Efficient wire feeding: roller plate. Safety: secure locking of the wire feeding compartment. Self adjusting control board (TF 00) Digital display A/V. Wire speed. Mode T / T / tack welding. Tack welding adjustment. Starting speed. Stick-out adjustment. Test / Purge gas / Wire advance. Torch connection. Water inlet / outlet on TF 00H type. Rollers see page - TECHNICAL DATA: TF 00 - TF 00 - TF 00 H TF 00 AIR TF 00 AIR TF 00 WATER Digital display A/V - Wheels Equipped for water cooled torch - - Rollers 0. (.0) mm.0 (.) mm Cat. nr TF 00 TF 00 TF 00 H Harness length m W000 W000 W0009 Harness length 0 m W000 W000 W0000 Harness length 0 m - W000 W000 -
13 Multi-process welding power source. Portable with inverter technology. Single-phase input voltage. PRECISA 0 SG PRECISA 0 SG is a multi-process inverter technology power source. Its weight, power and primary single-phase input voltage, make the PRECISA 0 the specialist for rapid maintenance operations. Input voltage: 0 V single-phase. Display: digital A / V. Multi-process: MIG / MMA / TIG DC. Wire feeder: roller. Professional: robust construction with handle. Programmable: 9 programs available, program memory. Polarity inversion: for welding applications with gasless flux cored wire. Wire spool: D 00, D 00 optimal. MIG torch connections: with European connectors or Spool Gun. Digital display. PORTABLE MULTI-PROCESS Standards EN 09- EN 09-0 MIG/ MAG WELDING EQUIPMENT TECHNICAL CHARACTERISTICS: Program mode buttons. Potentiometer. MIG / MMA / TIG DC selection. Selection T / T / point. European connector for torch. Spool Gun connection control. Welding current adjustment. Wire speed regulation. PRECISA 0 SG MMA TIG MIG 00-0 WELDING EQUIPMENT Input voltage 0/0 Hz 0 V single-phase Input power kva -. kw Max input current A A A Effective input current A A A Open circuit voltage 0 A V 0 A Welding current range - 0 A A - 00 A 0-00 A at % - 00 A 00 A Torches see pages -9, -0 & - Rollers see page - Duty cycle at 0% 0 A - - at 0 C at 0% 0 A A A at 00% A A A Wire diameter mm Protection index IP Dimensions x 0 x 0 mm Weight 9 kg TO ORDER: Power source only W000 Options kg spool support W000 TIG Torch W000 Kit C+ W00009 Delivered equipped with: electric primary cable, earth cable, rollers for wires 0. /.0 mm, safety instructions, user manual. -
14 welding power source. Inverter pulsed technology. Three-phase input voltage. PRECISA 0 PH The PRECISA 0 PH is the ideal partner when it comes to the flexibility required for welding on all materials (steel, light alloys or applications such as agricultural machines, metallic furniture, etc...). Designed for both conventional and advanced processes (for thin plate MIG brazing etc...) and also for MMA applications. This machine is optimized due to the facilities for adjustment and the wide range of synergic programs for all materials and gas combinations. This installation is the best solution for an efficient machine, which is easy to adjust and easy to use. Standards EN 09- EN 09-0 Numerical control of parameters giving exceptional arc stability and welding quality. Water cooled. Easy selection of parameters, easy to read digital displays. Synergic curves available as standard to optimize results with a simple one button selection. A wide set of welding processes available for optimum welding in all situations: - Speed Short Arc TM : high welding speed / low deformation on thin plates, - Pulsed: for optimum aluminium and stainless steel welding, - Cold Double Pulse TM : for the highest quality on thin plates especially stainless and aluminium, weld bead with TIG aspect, - MIG Brazing: for thin coated plates, e.g. car body repair, with low deformation and good mechanical characteristics. SYNERGIC PULSED FOR TOP WELDING RESULTS 00-0 Welding voltage and set up parameter display. Welding current or wire speed or thickness display. 9 Mode and welding cycle selection LEDs. Process choice selector. Gas selector. Wire grade selector. Wire diameter selector. Scrolling of set up parameters. Torches see pages -9, -0 & - Rollers see page Parameter setting. Selector for wire speed or thickness display. -
15 welding power source. Inverter pulsed technology. Three-phase input voltage. PRECISA 0 PH Basic functions: Wire speed setting (empty) Wire speed setting (welding) Arc length setting (empty) Arc length setting (welding) End setting (empty) End setting (welding) Spot T/T/cycle Hot start Fading TECHNICAL CHARACTERISTICS: Spray end Synergic mode Semi-synergic mode Parameter saving Display calibration Assisted calibration Software update Error messages Language choice B A MIG/ MAG WELDING EQUIPMENT PRECISA 0 PH Three-phase input voltage 00 V - 0/0 Hz Primary consumption. A (0%) - 9 A (00%) Open circuit voltage 0 V Welding current range 0 A - 0 A Duty cycle at % 0 A at 0 C at 00% 0 A Protection index IP S Dimensions (with trolley and feeder) 0 x 0 x 00 mm Weight TO ORDER: 0 kg C WELDING EQUIPMENT Power source water cooled Option A Wire feeder TF 0H Workshop trolley for power source B Pivot stand (requires wire feeder trolley) C Workshop trolley for wire feeder D RC-JOB remote control W000 W000 W00000 W00000 W W000 Harnesses Steel Aluminium m W W m W m W W m W W D Delivered equipped with: electric primary cable, safety instructions, earth cable, user manual. rollers for wire 0. /.0 mm, 00- -
16 MT 0 SH TECHNICAL CHARACTERISTICS: Wire feeder range Separate wire feeder installation for welding. Thyristors technology. Three-phase input voltage. The MT 0 S(H) is a synergic thyristor controlled unit for MIG-MAG welding. Robust and powerful it has been designed to produce high quality welds for the widest range of industrial applications. The separate wire feeders (air-water cooled) are available with different lengths of harness for all your welding needs. Input voltage: V three-phase. Mode: T / T welding cycle. Wire feeder: roller plate. Perfect starting: possibility to adjust the starting speed. Arc extinction device (stick-out): adjustable with knob. Simple: easy adjustment of the welding parameters with the OPT system function which is a synergic mode with access to pre recorded parameters which optimise welding performance. Flexibility: possibility to modify the welding parameters (in welding too) from the wire feeder or from the remote control when available. Digital display: precise pre-setting of welding thickness or wire speed and optimal reading of welding parameters (A + V). Versatile: for all solid or flux cored wire welding. Powerful: power transformer, choke and rectifier air cooled. Safety: protection class IP. Ergonomic: due to its pivoting wire feed unit support (option). MT 0 SH DVi - DViw Three-phase input voltage (0/0 Hz) -0 V Max input current. A (0 V) -. A (00 V) Effective input current 0. A (0 V) -. (00 V) Voltage regulation Open-circuit voltage Welding current Wire diameter Continuous adjustement V 0-0 A mm (. mm FCW) Duty cycle at 0 C at 0% 0 A at 00% 0 A Protection index IP Dimensions Weight TO ORDER: Power source only SYNERGIC CONTROL THYRISTOR TECHNOLOGY 0 x 0 x 00 mm 0 kg W000 T / T welding cycle. Crater filler cycle. Gas selection. Solid or cored wire selection. Display for current, thickness and wire speed. Delivered equipped with: primary cable m, earth cable m with clamp, gas hose m, safety instructions, user manual Voltage display. Selection for the display. Material selection. 9 Wire diameter selection. 0 ON and warning lamps. ON / OFF switch. Standards EN 09- EN
17 Separate wire feeder installation for welding. Thyristor technology. Three-phase input voltage. MT 0 SH Additional units TO ORDER: Cooler unit COOLER II Liquide for cooling unit FREEZCOOL 0L W W00000 DVi (air) / DViw (water) The DVi(w) wire feeders are compatible with the MT 0 S(W) power source. They are delivered as standard with sheathed cables (different lengths), trolley and spool cover. Wire feeder for intensive use. Sealed structure: protection of the wire feeding system. Easy to use: synergic and manual adjustment of welding parameters. Comfortable: due to its pivoting wire feed unit support (option) changing the orientation of the feeder making welding easier. Efficient wire feeding: roller plate. Safety: no access to moving parts and protection enclosure IP. Simple: feeder with handle for ease of movement. Robust: sheathed cables and torch support. Versatile: for all kinds of solid and flux cored wires up to. mm. 00- ROLLERS DIAMETER mm For torches see page -9, -0 & - Standards EN MIG/ MAG WELDING EQUIPMENT WELDING EQUIPMENT Rollers see page - TO ORDER: A A B C Wire feeder DV i D (air) Wire feeder DV iw D (water) Options Remote control Pivot support Slinging ring m W000 0 m W000 m W000 m W000 0 m W000 m W0009 W0000 W W00000 B C -
18 Spare parts for installations.. ROLLERS FOR WIRE FEEDERS EASYMIG / MAXISTAR ranges Roller Steel 0. / 0. mm W /. mm W000 Entry wire guide W0000 BLUMIG range Roller Steel Alu Flux cored wire 0. mm W mm W W mm W W mm W W W0009 (.0 /. mm). mm W000 - W000 (. /. mm) Entry wire guide Intermediate wire guide Exit wire guide W000 W000 W0009 OPTIONS PRECISA 0 SG range Roller Steel Alu Flux cored wire mm W mm W0000 W0000 W0009 Entry wire guide MT 0 S(H) range Steel.0.. W00090 Entry wire guide Roller Intermediate wire guide Exit wire guide ALUKIT W00000 W0000 W W0000 W000 Alu. -. W0000 W0000 W W0000 W0000 Flux.0 -. W00000 cored. -. W0000 wire. -. W000 W0009 W0000 W0000 W0000 W000 W0009 W000. WELDING TORCHES EASYMIG / MAXISTAR ranges EASYMIG EASYMIG 0 Replacement torch W000 W000 MAXISTAR / BLUMIG / PRECISA ranges Torches WMT- A WMT- A WMT- A WMT-00 W Cooling Air Air Air Water Duty cycle CO 0 A 0 A 00 A 00 A (at 00%) at 0% Ar + CO 0 A 00 A 0 A 0 A (at 00%) m W000 W000 W000 W0009 Length m W000 W000 W000 W0009 m - W000 W000 W0009 Spool Gun SG 0 air cooled - 0 A - 00% - m W0009 Spool Gun SG 00 air cooled - 00 A - 00% - m W
19 Torches. WMT range TORCHES A complete range of MIG MAG welding torches devised to meet all needs in the field of semi-automatic welding. WMT- A: For car bodywork, due to its small overall size. WMT- A: For interlocking, metal and maintenance work. WMT- A: For sheel metal work, mechanical welding and metal frames Standards EN 09. EN TORCHES WMT-00 W / WL: For heavy duty work requiring water cooling of the torch. The swan neck is available in two lengths. TECHNICAL CHARACTERISTICS: TORCHES WMT- A WMT- A WMT- A WMT-00 W / 00 WL* Cooling air air air water Duty 00% Voltage class Wires used CO 0 A 0 A 00 A 00 A Ar + CO 0 A 00 A 0 A 0 A L V Steel 0. to.0 mm Steel 0. to. mm Steel 0. to. mm Steel 0. to. mm - Alum..0 to. mm Alum..0 to. mm Alum..0 to. mm Gas supply 0 to l/min 0 to l/min 0 to l/min 0 to l/min Standard delivery with The Benefits: Very easy to use Ergonomic handle for perfect grip Flexibility thanks to the back swivel Wear parts in conformity with EC standards European connector Contact tube Steel 0. mm Steel.0 mm Steel. mm Steel. mm Nozzle (diameter). mm.0 mm.0 mm. mm WELDING EQUIPMENT Liner For steel wire For steel wire For steel wire For steel wire mm.0 -. mm.0 -. mm.0 -. mm Cat. nr WMT- A WMT- A WMT- A WMT-00W WMT-00WL* m length W000 W000 W000 W0009 W000 m length W000 W000 W000 W0009 W000 m length - W000 W000 W0009 W000 *long swan neck -9
20 Wear parts torches. WMT- A TORCHES Conical nozzle Ø. mm W00000* Very conical nozzle Ø 0.0 mm W00000 Cylindrical nozzle Ø.0 mm W00000 Contact-tube support W00090 Nozzle spring W000 Mx Cu - Ø 0. mm contact tube W Mx Cu - Ø 0. mm contact tube W00000* Mx Cu - Ø.0 mm contact tube W00000 Mx CuCrZr - Ø 0. mm contact tube W00000 Mx CuCrZr - Ø 0. mm contact tube W00000 Mx CuCrZr - Ø.0 mm contact tube W00000 WMT- A L m helically corrugated steel liner W000000* L m helically corrugated steel liner W00000* L m helically corrugated steel liner W L m helically corrugated steel liner W00000 Mx Contact-tube support W00000 Mx Contact-tube support W00000* Insulating diffuser W000000* High temperature insulating diffuser W00000 Ceramic insulating diffuser W00000 Conical nozzle Ø.0 mm W000009* Very conical nozzle Ø.0 mm W Cylindrical nozzle Ø 0.0 mm W Mx Cu - Ø 0. mm contact tube W00000 Mx Cu - Ø.0 mm contact tube W00000 Mx Cu - Ø. mm contact tube W00000 Mx Cu - Ø. mm contact tube W Mx CuCrZr - Ø 0. mm contact tube W Mx CuCrZr - Ø.0 mm contact tube W00000 Mx CuCrZr - Ø. mm contact tube W00000 Mx CuCrZr - Ø. mm contact tube W00000 Mx - Ø.0 mm alu contact tube W Mx - Ø. mm alu contact tube W00000 Mx - Ø. mm alu contact tube W00000 Mx0 Cu - Ø 0. mm contact tube W00000 Mx0 Cu - Ø.0 mm contact tube W00000 Mx0 Cu - Ø. mm contact tube W00000* Mx0 Cu - Ø. mm contact tube W00000 Mx0 CuCrZr - Ø 0. mm contact tube W Mx0 CuCrZr - Ø.0 mm contact tube W00000 Mx0 CuCrZr - Ø. mm contact tube W00000 Mx0 CuCrZr - Ø. mm contact tube W00000 Mx0 - Ø.0 mm alu contact tube W00000 Mx0 - Ø. mm alu contact tube W00000 Mx0 - Ø. mm alu contact tube W L m helically corrugated steel liner W L m helically corrugated steel liner W L m helically corrugated steel liner W L m helically corrugated steel liner W00000* L m helically corrugated steel liner W00000* L m helically corrugated steel liner W00000*. - L m helically corrugated steel liner W L m helically corrugated steel liner W L m helically corrugated steel liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W00000 *Original torch equipment -0
21 Wear parts torches. WMT- A TORCHES Conical nozzle Ø.0 mm W * Very conical nozzle Ø.0 mm W Cylindrical nozzle Ø.0 mm W Mx Cu - Ø 0. mm contact tube W00000 Mx Cu - Ø.0 mm contact tube W00000* Mx Cu - Ø. mm contact tube W00000 Mx CuCrZr - Ø 0. mm contact tube W Mx CuCrZr - Ø.0 mm contact tube W00000 Mx CuCrZr - Ø. mm contact tube W00000 Mx - Ø.0 mm alu contact tube W Mx - Ø. mm alu contact tube W00000 Insulating diffuser W00000* High temperature insulating diffuser W00000 Ceramic insulating diffuser W00000 Conical nozzle Ø. mm W000009* Very conical nozzle Ø. mm W Cylindrical nozzle Ø 0.0 mm W Contact-tube support WMT-00 W / 00 WL (long swan neck) W Nozzle spring W L m helically corrugated steel liner W L m helically corrugated steel liner W L m helically corrugated steel liner W L m helically corrugated steel liner W00000* L m helically corrugated steel liner W00000* L m helically corrugated steel liner W00000* L m Teflon liner W L m Teflon liner W L m Teflon liner W00000 Contact-tube support Mx W00000 Contact-tube support Mx W00000* TORCHES WELDING EQUIPMENT Mx Cu - Ø 0. mm contact tube W00000 Mx Cu - Ø.0 mm contact tube W00000 Mx Cu - Ø. mm contact tube W00000 Mx Cu - Ø. mm contact tube W Mx CuCrZr - Ø 0. mm contact tube W Mx CuCrZr - Ø.0 mm contact tube W00000 Mx CuCrZr - Ø. mm contact tube W00000 Mx CuCrZr - Ø. mm contact tube W00000 Mx - Ø.0 mm alu contact tube W Mx - Ø. mm alu contact tube W00000 Mx - Ø. mm alu contact tube W00000 Mx0 Cu - Ø 0. mm contact tube W00000 Mx0 Cu - Ø.0 mm contact tube W00000 Mx0 Cu - Ø. mm contact tube W00000* Mx0 Cu - Ø. mm contact tube W00000 Mx0 Cu - Ø.0 mm contact tube W00000 Mx0 Cu - Ø. mm contact tube W Mx0 CuCrZr - Ø 0. mm contact tube W Mx0 CuCrZr - Ø.0 mm contact tube W00000 Mx0 CuCrZr - Ø. mm contact tube W00000 Mx0 CuCrZr - Ø. mm contact tube W00000 Mx0 CuCrZr - Ø.0 mm contact tube W00000 Mx0 CuCrZr - Ø. mm contact tube W00000 Mx0 - Ø.0 mm alu contact tube W00000 Mx0 - Ø. mm alu contact tube W00000 Mx0 - Ø. mm alu contact tube W00000 Mx0 - Ø.0 mm alu contact tube W00000 Mx0 - Ø. mm alu contact tube W00000 *Original torch equipment L m helically corrugated steel liner W L m helically corrugated steel liner W L m helically corrugated steel liner W L m helically corrugated steel liner W00000* L m helically corrugated steel liner W00000* L m helically corrugated steel liner W00000*. water - L m helically corrugated steel liner W water - L m helically corrugated steel liner W water - L m helically corrugated steel liner W water - L m helically corrugated steel liner W water - L m helically corrugated steel liner W water - L m helically corrugated steel liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W L m Teflon liner W
CHAPTER 3. MIG/MAG welding. Introduction pages 3-2 & 3-3. WELDING POWER SOURCES Transformer technology power sources TORCHES
CHAPTER welding Introduction pages - & - WELDING POWER SOURCES Transformer technology power sources MAXISTAR 0 MEC / 00 M / 0 T page - PRECISA 00MP page - BLUMIG C / C / C / C page - BLUMIG S / 0 S / 0
More informationDIGIPULS II. MIG/MAG equipment for superior welding results.
DIGIPULS II MIG/MAG equipment for superior welding results. DIGIPULS II 2010-473 DIGIPULS II is the only product on the MIG/MAG welding market offering superior quality welding and advanced welding processes
More informationCITOSTEP. MIG/MAG Step controlled range. A step forward into intuitive welding.
MIG/MAG Step controlled range A step forward into intuitive welding www.oerlikon-welding.com machines are intelligent MIG/MAG welding installations with voltage switching technology and numerical control
More informationI N V E R T E R T E C H N O L O G Y P O W E R S O U R C E F O R M I G A N D M M A
I N V E R T E R T E C H N O L O G P O W E R S O U R C E F O R M I G A N D M M A 282-352-503 High quality MIG-MAG, a n d M M A w e l d i n g These are inverter power sources purposely designed for exceptional
More informationMIG-350HD/500HD. For MIG and Stick Welding. Specialist Features. The total solution of industrial MIG/MAG welding. Precision Arc Performance:
MIG-350HD/500HD Processes: MIG, Flux-Cored, Pulse MIG, MMA(Stick) Applications: Metal fabrication workshops Shipyards and offshore industry Chemical and process industry Steel structure workshops Input
More informationPioneer 321 MKS/MSR. P. F. C. Power Factor Corrector. English
Pioneer 321 MKS/MSR P. F. C. Power Factor Corrector English Pioneer 321 MKS Mig/Mag Kompact Synergic MKS: Applications Thanks to its dimensions and light weight, MKS is the best option on the market, for
More informationNEW MOBILITY IN MIG/MAG PULSED ARC TECHNOLOGY MEGAPULS 250
NEW MOBILITY IN MIG/MAG PULSED ARC TECHNOLOGY MEGAPULS 250 2 A powerful package portable and multi-functional Perfect for handcraft, medium sized companies and industrial use MEGAPULS 250 is a portable
More informationVIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVW182 Ex GST Inc GST $ $ Product Brochure For W244.
VIPER 182 - Multi-Function Inverter Welder-MIG-MMA 30-180 Amps #KUMJRVW182 Ex GST Inc GST $500.00 $550.00 ORDER CODE: W244 MODEL: VIPER 182 Type: MIG / MMA & Multifunction Part Number: KUMJRVW182 Voltage
More informationOPTIPULS i. Inverter technology MIG/MAG welding installation.
OPTIPULS i Inverter technology MIG/MAG welding installation. www.saf-fro.com OPTIPULS i Formidably easy to use, compact in size and offering exceptional welding performance, this new tool offers an unrivalled
More informationThe Perfect System Optimum Efficiency Easy to Use Advanced Wire Speed Reduced Spatter. 2 yr. warranty
The Perfect System Optimum Efficiency Easy to Use Advanced Wire Speed Reduced Spatter 2 yr warranty Cebora s Synergic Smart THE PERFECT SYSTEM Cebora s synergic smart switch system is a boilermaker/ welder
More informationRAZOR 250 MTS - Multi-Function Welder-MIG-TIG-MMA Amps
RAZOR 250 MTS - Multi-Function Welder-MIG-TIG-MMA 30-250 Amps #KUMJRRW250MIG Ex GST Inc GST $1,200.00 $1,320.00 ORDER CODE: MODEL: Type: Part Number: Voltage (V): Recommended Plug Amperage (amp): Welding
More informationSIP Hi-TECH Range exclusive to SIP
Inverter Welding Welding Equipment Hi-TECH 16 05182 T112 Inverter 230v (13amp) supply 10-80amp power 80amp @ 30% duty cycle 1.6-2.5mm electrode diameter Hot start & anti-stick Dinse sockets Compact and
More informationProcess: MAG(GMAW) MIG (GMAW) Stick (SMAW)
MIG-350CF/500CF Quick Specs Heavy Industrial Application: Metal fabrication workshops Shipyards and offshore industry Chemical and process industry Steel structure workshops Process: MAG(GMAW) MIG (GMAW)
More informationStandard equipment WELDING PACKAGE selection GuIDE
Standard equipment WELDING PACKAGE selection guide Content An easy choice MMA Introduction and Overview Stick welding or MMA is more than 100 years old. The MMA welding method has the lowest investment
More informationREBEL EMP 215ic THE TRUTH ABOUT REBEL. Ver F:
REBEL EMP 215ic THE TRUTH ABOUT REBEL. Ver. 2.0 1300 654 674 F: 03 9474 7391 enquiries@cigweld.com.au ESAB.COM CIGWELD.COM.AU You do not know the meaning of a typical day what it is like to work 9 to 5
More information3 - MIG/MAG welding Wear parts for 4 roll wire feeders
Wear parts f 4 roll wire feeders Wire feeder: DVU P400 - DVU P500 DIGIPULS II : DVU P400 - DVU P500 Ø mm Entry wire guide Roll diam. 37 Middle wire guide Exit wire guide ALUKIT W000305125 W000267598 W000277335
More informationMAGYS RANGE ROBUST & POWERFUL. Synergic Industrial MIG/MAG machines
MAGYS RANGE Synergic Industrial MIG/MAG machines ROBUST & POWERFUL Cutting-edge traditional technology MIG-MAG industrial machines, robust and effective INVERTER Traditional TRADITIONAL Synergic Synergic
More informationMIG/MAG WELDING WELDING TOOLS AND ACCESSORIES
MIG/MAG WELDING MIG/MAG WELDING WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES MIG/MAG Torches...................................................................... 74 to 7 Zirconium contact
More informationTIG WELDING SYSTEMS. e.g. TIG 170 AC/DC. Digital welding current indicator with automatic nominal and actual value changeover.
TIG WELDING SYSTEMS SOME LIKE IT HOT. The centrepiece of a TIG welding device is the optimum ignition and control. That makes welding devices real perfectionists: they can handle all metals from 0.3 on
More informationMicroPulse 302MFK. English
MicroPulse 302MFK English The Power Source MicroPulse 302MFK Multi Process Portable MIG MAG Synergic MIG MAG Pulse / Double Pulse NEW POWER SOURCE INVERTER MIG MAG SYNERGIC W.ECO Technology Inside POWER
More informationOrbital welding (welding generators)
Cutting, facing & orbital welding Our new range of AXXAIR welding generators has been designed to facilitate the use and programming of your equipment. Intuitively, you will have access to sophisticated
More informationINTELLIGENT MIG WITH THE MOST SIMPLE CONTROL PANEL IN THE WORLD
FLEX 3000C / FLEX 3000 DUO INTELLIGENT MIG WITH THE MOST SIMPLE CONTROL PANEL IN THE WORLD Switch on, press and weld Pulse welding and MIG brazing as standard Quattro Pulse TM ERGO welding hose or advanced
More informationOrbital welding (welding generators)
Cutting, facing & orbital welding Our new range of AXXAIR welding generators has been designed to facilitate the use and programming of your equipment. Intuitively, you will have access to sophisticated
More informationHighPULSE. The impressive PulseARC series! MIG/ MAG
HighPULSE The impressive PulseARC series! MIG/ MAG www.merkle.de Merkle HighPULSE series: ALWAYS AT THE PULSE OF TIME! Taking the leading welding technology to a higher perfection was the goal of the Merkle
More informationPioneer 321 Pulse. English
Pioneer 321 Pulse English 321 Pulse: Applications Pioneer Pulse 321 is professional 3 Phase Inverter Power Source (320A 45% at 40 C) MIG-MAG available modes are: Manual, Synergic, Pulse Synergic and Double
More informationHighPULSE. The revolution in PulseARC welding! PLASMA MERKL ROBOTI CUTTI CUTTING TIG ELECTRO AUTOMATION
HighPULSE The revolution in PulseARC welding! MIG/ M MIGTIG / MAG www.westermans.com www.merkle.de PLASMA TIG AUTOMATION CUTTING PLAS CUTTI ELECTRO MERKL PLAS ROBOTI WELD MIG/ MAG Merkle PulseARC Merkle
More informationTIG WELDING WELDING TOOLS AND ACCESSORIES. TIG torches to 75 Tungsten electrodes to 77 Other accessories to 79
TIG WELDING TIG WELDING WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES TIG torches............................................................................... 70 to 75 Tungsten electrodes...................................................................
More informationDigital Control for the Welding Professional
EN Digital Control for the Welding Professional Kemppi Pro Evolution the professional s intelligent tool Benefits A single product for every need Extensive control panel options MIG/MAG, pulse MIG, TIG,
More informationTIG WELDING. TIG torches to 67 Tungsten electrodes to 69 Other accessories to 71
TIG WELDING TIG WELDING WELDING TOOLS AND ACCESSORIES TIG torches.............................................................................. 66 to 67 Tungsten electrodes..................................................................
More informationINSTRUCTION MANUAL FOR WIRE WELDING MACHINE
INSTRUCTION MANUAL FOR WIRE WELDING MACHINE IMPORTANT: BEFORE STARTING THE EQUIPMENT, READ THE CONTENTS OF THIS MANUAL, WHICH MUST BE STORED IN A PLACE FAMILIAR TO ALL USERS FOR THE ENTIRE OPERATIVE LIFE-SPAN
More informationTOOL TECH WELDING & PACKAGING PRODUCTS 2017 RETAIL & WHOLESALE. Call : , (0422) SALES SERVICE SPARES
TOOL TECH WELDING & PACKAGING PRODUCTS 2017 RETAIL & WHOLESALE INVERTER AIR BUBBLE ROLL MIG WELDING PRINTED TAPE NOZZLE TAPE DISPENSER Call : +91 94865 02628, +91 94429 82520 (0422) 4214520 SHIELD WWW.TOOLTECENGINEERING.COM
More informationPro Evolution. Digital Control for the Welding Professional
Pro Evolution Digital Control for the Welding Professional Digital Control for the Welding Professional Flexibility The productivity of welding should be judged with all phases of the welding process in
More informationCITOWAVE II.
CITOWAVE II www.oerlikon-welding.com CITOWAVE II More than a welding machine, a welding solution The CITOWAVE II embodies a new generation of welding machines ultra moder design and, entirely adaptable
More information3 2 1 AC/ D C. Output Voltage Led. Remote Control Led. General AlarmLed. Encoder. Menu Function Key. Job Management Key Q START.
3 2 1 AC/ D C 321 Output Voltage Led General AlarmLed Remote Control Led Encoder Menu Function Key Job Management Key MMA/ARC AIR TIG DC-TIG DC/Pulse TIG DC/Pulse/Syn. Functions TIG AC-TIG AC/Pulse Mix
More information250 / 320 PULSE SMART 250 / 320 PULSE MOBIL
/ 320 PULSE SMART / 320 PULSE MOBIL EN 02/2018 axe PULSE smart AL axe 320 PULSE smart AL Welding synergy inverter for MIG/MAG, MIG/MAG pulse and MMA. axe pulse smart MIG/MAG - Full synergy or manual mode
More informationTHE DIGITAL SUPER INTELLIGENT MIG WELDING MACHINES OF THE FUTURE
FLEX 4000 / FLEX 5000 THE DIGITAL SUPER INTELLIGENT MIG WELDING MACHINES OF THE FUTURE "Switch on, press and weld" - it is as simple as that, even when it comes to advanced MIG welding Option: MIG Manager,
More informationWST Fume Extraction Torches
WST Fume Extraction Torches for MIG/MAG welding www.airliquidewelding.com If the rivers are kept clean, there will be no need to clean up the oceans. The extraction of welding fumes at source provides
More informationChapter 4 Plasma cutting
Chapter Plasma cutting 0-00R Portable installations 00-0 A complete range of heavy duty plasma cutters from the specialist of plasma process. The worldwide recognized SAF-FRO plasma range is the solution
More informationQINEO PULSE. The versatile welding machine for industry
QINEO PULSE The versatile welding machine for industry Some ideas set the trend for future times. PULSE 2 CLOOS: Your brand for innovative welding technology! Providing added value for our customers! This
More informationAgenda. Hitsaustekniikka Kon Gas Metal Arc Welding Conventional control (solid wire) - Fundaments
Department of Engineering Design and Production Master Degree in Mechanical Engineering Hitsaustekniikka Kon-67.4200 Gas Metal Arc Welding Conventional control (solid wire) - Fundaments Materials Joining
More informationKCWONG. Shielded Metal Arc Welding (SMAW) Gas Metal Arc Welding (GMAW/MIG) Flux-cored Arc Welding (FCAW) Gas Tungsten Arc Welding (GTAW/TIG) KCWONG
1 Shielded Metal Arc Welding (SMAW) Gas Metal Arc Welding (GMAW/MIG) Flux-cored Arc Welding (FCAW) Gas Tungsten Arc Welding (GTAW/TIG) 2 Working Principle Equipment Filler metals Advantages Limitation
More informationKEMPPI K7 WELDING EQUIPMENT. FastMig X Regular PRODUCTIVE WELDING FOR MULTI-MATERIAL WORKSHOPS
KEMPPI K7 WELDING EQUIPMENT FastMig X Regular PRODUCTIVE WELDING FOR MULTI-MATERIAL WORKSHOPS 8.11.2018 FastMig X Regular FASTMIG X WITH THE REGULAR SETUP IS THE SOLUTION FOR APPLICATIONS WHERE MULTI-
More informationDISCOVERY 220 T. P. F. C. Power Factor Corrector. English
DISCOVERY 220 T P. F. C. Power Factor Corrector English Discovery 220T 220 T: Applications Thanks to its dimensions and the ratio weigh-power/duty cycle 300T is the best option on the market, for small
More informationDISCOVERY 221 AC/DC. P. F. C. Power Factor Corrector. English
DISCOVERY 221 AC/DC P. F. C. Power Factor Corrector English Discovery 221AC/DC 221AC/DC: Applications Thanks to its dimensions and the ratio weigh-power/duty cycle 300T is the best option on the market,
More informationSynergic Inverter MIG welder
Synergic Inverter MIG welder Features and Benefits MIG160i This versatile power source is suitable for various applications from general repairs to specific material types used in the body shop industry.
More informationMIG/MAG WELDING WELDING TOOLS AND ACCESSORIES
MIG/MAG WELDING MIG/MAG WELDING WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES MIG/MAG Torches...................................................................... 82 to 8 Zirconium contact
More informationTECHNOLOGY FOR THE WELDER S WORLD. ROBO Compact W600 Rugged, powerful & reliable.
TECHNOLOGY FOR THE WELDER S WORLD. ROBO Compact W600 Rugged, powerful & reliable. www.binzel-abicor.com W600 Three strong performers! Together with the two torch neck types ABIROB W600 and ROBO WH W600,
More informationGMAW (MIG) / FCAW / MCAW
Welding Processes GMAW () / FCAW / MCAW Gas Metal Arc Welding (GMAW), Flux Cored Arc Welding (FCAW) and Metal Cored Arc Welding (MCAW) Gas Metal Arc Welding (GMAW) GMA commonly referred to as Metal Inert
More informationWarranty period for professional equipment. Warranty period for industrial equipment. Power source can be used with important length of primary cable
Arc equipment MMA power sources... p 4 to 9 TIG power sources and torches... p 10 to 17 MIG/MAG equipment and torches... p 18 to 31 Plasma cutting machines... p 31 to 32 Consumables Coated electrodes...
More informationVariants of MIG/MAG Flux Cored Arc Welding (FCAW)
Variants of MIG/MAG Flux Cored Arc Welding (FCAW) Professor Pedro Vilaça * * Contacts Address: P.O. Box 14200, FI-00076 Aalto, Finland Visiting address: Puumiehenkuja 3, Espoo pedro.vilaca@aalto.fi ; Skype:
More informationTHE NEW MIG/MAG GENERATION
THE NEW MIG/MAG GENERATION 170-2 450-4 REHM Setting the pace in cutting and welding today REHM Online: www.rehm-online.de 2 Innovation in Action 170-2 450-4 > The industry is delighted! Some 10 000 tonnes
More informationKemppi K3 Welding equipment
Master S 400 A MASTER OF SITES Kemppi K3 Welding equipment 1(5) A POWERFUL, PORTABLE AND SIMPLE STICK (MMA) WELDER FOR INDUSTRIAL APPLICATIONS Master S 400 is designed for high-performance Stick (MMA)
More informationENel Sp. z o. o. - WROCŁAW DESIGN AND MANUFACTURE OF POWER ELECTRONIC DEVICES INVERTER WELDING MACHINE ENEL250A USER MANUAL DEALER:
ENel Sp. z o. o. - WROCŁAW DESIGN AND MANUFACTURE OF POWER ELECTRONIC DEVICES INVERTER WELDING MACHINE ENEL250A USER MANUAL DEALER: . INTRODUCTION This manual contains information that will allow to take
More informationMulti-Purpose Mechanized Welding Carriage
WEL-HANDY MULTI Multi-Purpose Mechanized Welding Carriage Feature & Benefits Two Models Available Standard and Programmable Stitch/Tack Multi Weld Process Standard and Programmable Stitch/Tack Multiple
More informationProduct Catalogue. Compressors Generators Welders Accessories. T +44 (0) F +44 (0) W
Product Catalogue Compressors Generators Welders Accessories NAP Brands Limited Napier House, Unit 7, Corunna Court, Warwick, United Kingdom CV34 5HQ T +44 (0)926 482880 F +44 (0)926 482889 W Printed in
More informationInsquare W 300/420/600
Insquare W 300/420/600 Perfect Technology for Highest Demands! The series of TIG inverter welding units model Insquare consists of five models: Insquare W 300 DC: 320 A (60 % duty cycle) direct current
More informationWelding Processes. Consumable Electrode. Non-Consumable Electrode. High Energy Beam. Fusion Welding Processes. SMAW Shielded Metal Arc Welding
Fusion Consumable Electrode SMAW Shielded Metal Arc Welding GMAW Gas Metal Arc Welding SAW Submerged Arc Welding Non-Consumable Electrode GTAW Gas Tungsten Arc Welding PAW Plasma Arc Welding High Energy
More informationPlasma Cutting Units.
MERKLE Plasma Cutting Units. The efficient alternative! PLASMA CUTTING www.merkle.de Plasma cutting unit C 82. Small and portable! PLASMA CUTTING Merkle Plasma cutting Functionality and easy operation
More informationQuality for trade and industry
MEMBER OF EWM GROUP Quality for trade and industry Product catalogue 2016 1st quarter Offers and promotions see Welding machines and accessories MMA MIG/MAG TIG 2-YEAR WARRANTY Made in EU TEAMWELDER Top
More informationCOMPACT PRECISION TECHNOLOGY.
WELDING TECHNOLOGY COMPACT PRECISION TECHNOLOGY. Our engineers know what they are doing when it comes to top class welding equipment. They keep in close contact with those who know best what good welding
More informationM SERIES
www.kolarc.com M SERIES Kolarc M Series Professional Multiproses Welding Machines All MIG/MAG processes, One welding machine, One price! n Root / Root Pulse - for perfect root welding n Force / Force Pulse
More informationWelding without compromise
WELDMATIC INDUSTRIAL MIG WELDERS - 3 phase Welding without compromise Finely tuned to give you smooth, high performance welds WIA Industrial MIG Welders to suit 3 phase power Made in Australia www.welding.com.au
More informationSTICK WELDING and TIG WELDING
STICK WELDING and TIG WELDING DC STICK WELDING INVERTER 3 058935 058936 058937-058939 Inverter technology for easy welding High quality welding with low power consumption Compact, light weight for easy
More informationKEMPPI K3 WELDING EQUIPMENT. MagTrac F 61 IMPROVED WELDING PRODUCTIVITY AND ERGONOMICS
KEMPPI K3 WELDING EQUIPMENT MagTrac F 61 IMPROVED WELDING PRODUCTIVITY AND ERGONOMICS 20.11.2018 MagTrac F 61 MAGNETIC CARRIAGE UNIT FOR LIGHT MIG/MAG WELDING MECHANIZATION Light mechanization is the most
More informationProtection classification IP 23
TIG 180 AC/DC puls 290-020200-00000 TEAMWELDER TIG 180 AC/DC the specialist for aluminium welding TIG and MMA welding Ideal for aluminium: Optimum ignition and stabilisation of the alternating current
More informationX3 MIG Welder. And you know.
X3 MIG Welder Tough and reliable And you know. X3 MIG Welder Powerful tool for serious welders X3 MIG Welder is a trustworthy partner for a serious welder. It is a hard-boiled inverter-based MIG/MAG welding
More informationTIG 180P - DC TIG & ARC Inverter Welder-High Frequency 5-180A
TIG 180P - DC TIG & ARC Inverter Welder-High Frequency 5-180A #KUMJR180P ORDER CODE: W163 Type: DC Inverter Welder MODEL: TIG 180P / HF Part Number: KUMJR180P Voltage / Amperage (V / amp): 240 / 15 Recommended
More informationT HE NEW S TEP L ES S MI G / MAG - G ENER AT I O N MEGA.ARC
QUALITAS TECHNOLOGY LIMITED Rehm's International Partner for the United Kingdom T HE NEW S TEP L ES S MI G / MAG - G ENER AT I O N MEGA.ARC 2 Stepless regulation for highly professional and flexible implementation
More informationSmootharc i-series Range
Smootharc i-series Range Introducing the Smootharc Elite i-series range of MIG machines. A range of robust, inverter-based power sources for MIG/MAG standard, MMA and TIG (Liftarc) welding plus arc air
More informationTECHNICAL INSTRUCTIONS MANUAL. GPS MODULAR SYSTEM. INDUSTRIAL MIG/MAG WELDING EQUIPMENT OF PULSED-SYNERGIC CONTROL.
GALA PULSE SYNERGIC EN TECHNICAL INSTRUCTIONS MANUAL. GPS MODULAR SYSTEM. INDUSTRIAL MIG/MAG WELDING EQUIPMENT OF PULSED-SYNERGIC CONTROL. GALA PULSE Synergic 4000 (3Ph - 230/400V 50/60 Hz) Ref. 42300000
More informationKEMPPI K5 WELDING EQUIPMENT. FastMig M Synergic FOR ROBUST AND HEAVY DUTY WELDING
KEMPPI K5 WELDING EQUIPMENT FastMig M Synergic FOR ROBUST AND HEAVY DUTY WELDING 14.06.2018 FastMig M Synergic TOP PERFORMANCE INDUSTRIAL MIG/MAG AND STICK (MMA) WELDING The industrial multi-process welding
More informationGENERAL 2 ARC WELDING WELDING TOOLS AND ACCESSORIES
ARC WELDING GENERAL GENERAL ARC WELDING WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES Cables and connectors................................................................ 4 to 43 Clamps.....................................................................................
More informationCOMPLETE INVERTER MIG-MAG RANGE. Italian creations PRODOTTO IN ITALIA. the only way to forward
COMPLETE INVERTER MIG-MAG RANGE Italian creations the only way to forward PRODOTTO IN ITALIA When tradition and innovation are welded together. In 1979 in Castegnero, few kilometers from Vicenza, Stel
More informationAC/DC 315 Razor Digital - AC/DC Inverter TIG/ARC Welder A #KUMJRRW315ACDC Ex GST Inc GST
AC/DC 315 Razor Digital - AC/DC Inverter TIG/ARC Welder 10-315A #KUMJRRW315ACDC Ex GST Inc GST $1,900.00 $2,090.00 $1,800.00 $1,980.00 Special Ends 30/09/2018 ORDER CODE: W175 Type: AC/DC Inverter Welder
More informationIEC ; -10S-Safety sign, EMC class A
TIG 180 DC puls 290-020100-00000 TEAMWELDER TIG 180 DC light and compact, ideal for assembly work DC TIG and MMA welding Easy to transport to any operating site thanks to the practical carrying strap and
More informationRolling stock & transportation Heavy machinery manufacturing
Briefly Suitable for robust workshop use High-quality MIG/MAG pulse welding WiseFusion Less faults, less repairs Save filling material Up to 30 % less groove volume Reduced welding time Get it finished
More informationThe HF arc start provides easy arc ignition leaving no tungsten inclusion and no contamination of the tungsten electrode.
AC/DC 200 - AC/DC Inverter TIG/ARC Welder 10-200A #KUMJR200AC/DC Ex GST Inc GST $1,150.00 $1,265.00 $1,050.00 $1,155.00 Special Ends 30/09/2018 ORDER CODE: W174 Type: AC/DC Inverter Welder MODEL: UNITIG
More informationKEMPPI K3 WELDING EQUIPMENT. Master S 400 A MASTER OF SITES
KEMPPI K3 WELDING EQUIPMENT Master S 400 A MASTER OF SITES 21.11.2018 Master S 400 A POWERFUL, PORTABLE AND SIMPLE STICK (MMA) WELDER FOR INDUSTRIAL APPLICATIONS Master S 400 is designed for high-performance
More informationSIGMA SELECT SIGMA SELECT - TOUGH, VERSATILE, BUILT TO MEET THE FUTURE
SIGMA SELECT SIGMA SELECT TOUGH, VERSATILE, BUILT TO MEET THE FUTURE SIGMA SELECT A TRULY CUSTOMISED WELDING SOLUTION Modularbased threephase MIG/MAG and MMA inverter. From basic, manually operated welding
More informationgmbh Arc Welding Technology Product Catalogue 2017 elmaarc vision
gmbh Arc Welding Technology Product Catalogue 2017 elmaarc vision gmbh Contact manufacturer ELMA-Tech - the Welding Process-Versteher From Monday to Friday, our sales department is available from 8 am
More informationOrbital welding (Closed head)
5 Orbital welding (Closed head) Our range of closed welding heads (SATF series) allows you to make very high quality welds in a minimum space. These heads have been studied to meet the most stringent welding
More informationOrbital welding (Open head)
Cutting, dressing & orbital welding INNOVATIVE ORBITAL SOLUTIONS FLEXIBILITY, PRODUCTIVITY AXXAIR open heads are available with or without filler metal. They have an optimized rotation sweep and 2 positions
More informationCatalogue. of products
Catalogue of products CONTENT ABOUT COMPANY 2 OVERVIEW OF FUNCTIONS 3 SINGLE-PHASE UNDERVOLTAGE PORTABLE INVERTERS FĒNIX 5 SINGLE-PHASE INVERTERS 7 KÜHTREIBER, Ltd. is a Czech company, which is engaged
More informationArc Welding Technology Price List elmaarc vision
Arc Welding Technology Price List 2018 elmaarc vision Contact manufacturer ELMA-Tech - the Welding Process-Versteher Preis/ From Monday to Friday, our sales department is available from 8 am to 5 pm: Tel.:
More informationINSTRUCTION MANUAL MIG 160 / MIG 200 / MIG 300 / MIG 300S
INSTRUCTION MANUAL MIG 160 / MIG 200 / MIG 300 / MIG 300S contents warning installation operation welding parameters troubleshooting warranty spare parts list torch consumable list 3 4 5 6 7 8 8 9-10 EC
More informationStick Electrode Welding Machines. GMA (MIG/MAG) Welding Machines. Plasma Cutting Machines. Oto-Darkening Welding Helmet. Anti-Spatter Welding Spray
Eczacýbaþý - Askaynak EXPRESSWELD Products Stick Electrode Welding Machines GMA (MIG/MAG) Welding Machines Plasma Cutting Machines Oto-Darkening Welding Helmet Anti-Spatter Welding Spray www.askaynak.com.tr
More informationArc welding GMAW. CTU in Prague Faculty of Mechanical Engineering
1st semester 2015/2016 Arc welding GMAW CTU in Prague Faculty of Mechanical Engineering Ing. Petr Vondrouš, PhD., IWE GMAW Gas Metal Arc Welding GMAW Definition GMAW stands for Gas Metal Arc Welding GMAW
More informationThe HF arc start provides easy arc ignition leaving no tungsten inclusion and no contamination of the tungsten electrode.
AC/DC 200 - Inverter Tig Welder Package Deal 10-200A #KUMJR200AC/DC Includes Auto Welding Helmet & Foot Control Ex GST Inc GST $1,470.00 $1,617.00 ORDER CODE: K017C Type: AC/DC Inverter Welder PKG MODEL:
More informationUpon completion of this module
Welding 1.4 Upon completion of this module 1. Cite the advantages of welding over other joining methods 2. Name & identify the various welding and cutting processes currently used in industry 3. Recognize
More information(mm): Protection Class: ~ Remote Control (Yes / ~): ~ Recommended Generator (kva): 9.0 Efficency (%): ~ Power Factor: ~ Description
Razor ARC 180DC - Multi-Function Inverter Tig Welder Package Deal 10-180A #KUMJRRW180 Includes Auto Helmet, Tig Torch, Magnetic Torch Rest, Arc Leads Ex GST Inc GST $535.00 $588.50 $420.00 $462.00 ORDER
More informationDURMAT PTA Welding Equipment: PTA Power Sources PTA Manual Torches, Robot Torches, Special Torches PTA Accessories
www.durmat.com DURMAT PTA Welding Equipment: PTA Power Sources PTA Manual Torches, Robot Torches, Special Torches PTA Accessories Tungsten Company Carbide Powders WEAR SOLUTIONS With Creative Ideas for
More informationHIGHLIGHTS SYSTEM OVERVIEW CONTROL ACCESSORIES TECHNICAL DATA MAIN AREAS OF APPLICATION
PRODUCT PRESENTATION Contents HIGHLIGHTS SYSTEM OVERVIEW CONTROL ACCESSORIES TECHNICAL DATA MAIN AREAS OF APPLICATION HIGHLIGHTS Product range PHOENIX HIGHLIGHTS PHOENIX PROGRESS Universal 3 welding processes
More information3 TIG welding. 3.1 A description of the method. 3.2 Equipment
3 TIG welding 3.1 A description of the method TIG welding (also called Gas Tungsten Arc Welding, GTAW) involves striking an arc between a non-consumable tungsten electrode and the workpiece. The weld pool
More informationGAS METAL ARC WELDING (GMAW)
GAS METAL ARC WELDING (GMAW) INTRODUCTION Gas Metal Arc Welding (GMAW) is also called Metal Inert Gas (MIG) arc welding. It uses consumable metallic electrode. There are other gas shielded arc welding
More informationTack Welder Level 3 Question Bank
Tack Welder Level 3 Question Bank I Fill in the blanks 1. Principle of GAS cutting is 2. Argon cylinder colour is 3. rays will emit from welding arc. 4. Tongs are used to hold 5. Full form of GMAW 6. Diameter
More informationxfume Fume Extraction Torch
TECHNOLOGY FOR THE WELDER S WORLD xfume Fume Extraction Torch Let s Clear the Air. Every welding job generates fumes and smoke that might be hazardous if inhaled. Based on the well established torch series
More informationGMAW Unit Topics. During this overview, we will discuss the following topics:
GMAW (MIG Welding) GMAW Unit Topics During this overview, we will discuss the following topics: Safety GMAW Basics Equipment Set-Up Welding Variables Process Advantages and Limitations AWS Connection National
More informationCopyright 1999 Society of Manufacturing Engineers FUNDAMENTAL MANUFACTURING PROCESSES Welding NARRATION (VO):
Copyright 1999 Society of Manufacturing Engineers --- 1 --- FUNDAMENTAL MANUFACTURING PROCESSES Welding SCENE 1. CG: Fusion Welding Processes white text centered on black SCENE 2. tape 528, 14:18:33-14:18:52
More information