Konda Industry Co., Ltd

Transcription

1

2 Reputation ctuality Innovation High efficiency Konda Industry Co., Ltd Konda Industry Co., Ltd is a comprehensive enterprise established in 1997, specialized in machinery and drills etc. ll these products are widely applied in various fields: erospace and Defense General achining Energy Earthworks Heavy Industry our customers, cooperators and us. for human resources. In our overseas branch, the foreign staff occupies 80 percent. In the head- 0 We had glorious history; we have more confidence in the future. We will keep supplying good and foreign friends.

3 CONTENT Part 1 etric Catalogue General turning inserts Turning toolholders illing inserts... B-B17 illing tools... B18-B28 Threading inserts and tools... C-C11 Solid carbide end mills... D-D Drills... E-E07 Part 2 Inch Catalogue General turning inserts... F-F54 Turning toolholders... F55-F67 illing inserts... G-G17 illing tools... G18-G28 Threading inserts and tools... H-H11 Solid carbide end mills... I-I Drills... J-J05

4 KOND TOOLS ISO Turning grades overview General turning Threading Parting Grooving Code CVD Coating PVD (Coated) cermet Ceramic Cemented carbide CBN PCD Coating PVD Coating CVD PVD Cemented carbide P Steel Stainless Steel Cast iron K YBC151 YBC152 YBC251 YBC252 YBC351 YBD052 YB151 YBD2 YB153 YBD151 YB251 YBD152 YB253 YBD252 YBG2 YBG2 YBG2 YBG5 YNG151 YNG151 YNG151 YNG151C YNG151C YNG151C C00 CN00 CN00 CN00 YC YD051 YC40 YD1 YCB1 YBG1 YBG1 YBG1 YBC251 YBG2 YBG2 YBG2 YD1 N Non-ferrous metal YD1 YCD1 YBG1 YD1 S Heat resistant alloy & Ti alloy YBG2 YBG5 YBG2 YD1 YBG1 YBG2 YBG2 YD1 H Super hard material YCB2

5 Chipbreaker Precision Features/Shapes of inserts KOND TOOLS Turning Chipbreakers of Negative Inserts with Hole SF ap=0.05~1.0 (mm) fn=0.05~0.35 (mm/r) Recommended chipbreaker for finishing of P-type materials Double sided chipbreaker with -level tolerance has outstanding performance in finishing, achieving good surface quality. Tel: Fax: DF EF NF P D E DR LR E ap=0.3~2.0 (mm) fn=0.05~0.35 (mm/r) ap=0.05~1.0 (mm) ap=0.1~1.0 (mm) ap=1.5~5.0 (mm) fn=0.15~0.5 (mm/r) ap=1.5~5.0 (mm) fn=0.15~0.5 (mm/r) ap=0.5~1.5 (mm) fn=0.1~0.3 (mm/r) ap=3.0~12 (mm) fn=0.3~0.8 (mm/r) ap=3.0~15.0 (mm) fn=0.3~1.0 (mm/r) Recommended chipbreaker for finishing of -type materials Double sided chipbreaker with -level tolerance with sharp edges. It can cut off stainless steel effectively and avoid adhering and surface hardening. Recommended chipbreaker for finishing of S-type materials Double sided chipbreaker with -level tolerance can prevent wear and hardening to achieve high machining precision and good surface quality. Recommended chipbreaker for finishing of S-type materials Double sided chipbreaker with E-level tolerance can prevent wear and hardening to achieve high machining precision and good surface quality. Recommended chipbreaker for semi-finishing of P-type materials It has higher hardness of cutting edge than -D.It is good for semi-finishing under unstable working conditions, and machining cast iron with small cutting forces. Recommended chipbreaker for semi-finishing of P-type materials Large chipbreaker range ensures good performance for machining highly adhesive alloy steel with small cutting forces. Recommended chipbreaker for semi-finishing of -type materials -E posesses higher machining efficiency than chipbreaker -EF. It can solve processing problems, e.g. chipbreaking and adhering of stainless steel. Recommended chipbreaker for light roughing of -type & K-type materials It has good cutting edge hardness and wide application esp. for roughing. It can achieve high evacuation rate and efficiency of cutting edge. Recommended chipbreaker for light-load roughing of -type materials Single-sided general chipbreaker with -level tolerance has wide chipping range and sharp cutting edge is designed with inclined angle. ER ap=2.5~8.0 (mm) fn=0.2~0.6 (mm/r) Recommended chipbreaker for roughing of -type materials It has excellent capacity of impact-resistance and its special design can prevent the problems of adhering and high cutting heat when roughing stainless steel 02

6 KOND TOOLS Turning Chipbreakers of Positive Inserts with Hole Chipbreaker Precision Precision Features/Shapes of inserts SF G ap=0.05~1.0 (mm) fn=0.05~0. (mm/r) Priority choice for finishing with high requirement on chipbreaker Single-sided chipbreaker with G-level tolerance is the prio for precise finishing due to its excellent performance on chip breaking. HF ap=0.1~2.0 (mm) Recommended chipbreaker for finishing with wide application It is highly recommended for internal /external finishing of various materials with higher cutting speed and lower feed rate. EF ap=0.1~2.0 (mm) Recommended chipbreaker for finishing of P-type and -type materials With -level tolerance chipbreaker, good for cutting adhesive materials such as stainless steel, soft steel etc. H ap=1.0~4.0 (mm) fn=0.2~0.5 (mm/r) Recommended chipbreaker for semi-finishing with wide application With -level tolerance chipbreaker, it is suitable for internal and external semi-finishing of various materials, e.g. steel, stainless steel, cast iron etc. E ap=1.0~4.0 (mm) fn=0.2~0.5 (mm/r) Recommended chipbreaker for semi-finishing of -type materials With -level tolerance, it has higher hardness of cutting edge than -EF and it can achieve higher efficiency. Conventional chipbreaker ap=1.0~8.0 (mm) fn=0.2~0.6 (mm/r) Recommended chipbreaker for semi-finishing of -type materials With -level tolerance, it is suitable for profile machining materials like steel, cast iron etc. HR ap=3.0~7.0 (mm) fn=0.3~0.7 (mm/r) General chipbreaker for roughing of various materials With -level tolerance, it is good for both internal and external roughing of steel, stainless steel, cast iron etc. LC G ap=0.02~4.8 (mm) fn=0.05~0.5 (mm/r) Special chipbreaker for machining of l alloy and pure alloy With G-level tolerance, large rake angle and clearance angle, and sharp cutting edge. It ensures easy and fast cutting while remaining effective chip breaking. LH G ap=0.1~8.0 (mm) fn=0.1~0.5 (mm/r) Special chipbreaker for machining of l alloy With G-level tolerance, large rake angle and polishing treatment on surface. It can prevent built-up edge and achieve high workpiece surfcace with long life. Without chipbreaker G ap=0.05~0.5 (mm) Special chipbreaker for non-ferrous metal and materials with high hardness It is the best choice for machining non-ferrous metals and materials with high-hardness by welding PCBN&PCD materials to cemented carbide substrate. 03

7 KOND TOOLS Tel: Fax: CVD Grades for Steel P YBC152 YBC351 YB151 CVD YBC252 YB153 YBC151 YBC251 Thick TiCN and thick l2o3 YB251 Grades Introduction for finishing and semi-finishing of steel at higher speed with longer life. Thick TiCN and thick l2o3 for general machining (finishing, semi-finishing, roughing) of steel. composed of TiCN, thin l2o3 layer and TiN, with excellent resistance It is suitable for finishing, semi-finishing and roughing of stainless steel. with good wear resistance. It is the best choice for roughing YB253 it an excellent grade for finishing of steel. l2o3 layer and TiN makes it suitable for semi-finishing and roughing of stainless steel resistance and toughness; With gradient carbide substrate 2O3 and TiN makes T-TiCN, thick layer l2o3 and TiN makes it suitable for steel semi-finishing. premium choice for roughing of steel. 2O3 layer and TiN makes it the Grades for Stainless Steel 04

8 KOND TOOLS Grades for Cast Iron CVD K YBD052 YBD2 Extra thick l2o3+thick TiCN For finishing of cast iron at high speed under dry Black Diamond Thick l2o3+thick TiCN For machining nodular cast iron at high speed with excellent wear resistance and impact resistance. YBD152 YBD252 edium thick l2o3+thick TiCN For turning of cast iron at high speed and light edium thick l2o3+thick TiCN For rough turning of cast iron at moderate or low speed. YBD151 edium thick l2o3+thick TiCN For turning of cast iron at moderate speed. New Nano Coating Grade YBG2 makes it suitable for turning of various materials and finishing and semi-finishing of high-temperature alloys. PVD YBG2 turning of various materials and finishing and turning for super alloy. Black Diamond YBG2 of various materials, such as steel, stainless steel. YBG5 of various material difficult to cut, such as high temperature alloy, heat resistant alloy etc. YBG5 It is suitable for semi-finishing and roughing of stainless steel. 05

9 KOND TOOLS Tel: Fax: YCB1 YCB2 YCD2 PCBN & PCD C00 PCBN grade contains high CBN, with outstanding hardness (HV3400~3800), thermal stability, of cast iron, Fe-based P/ materials and heat resistant alloy. PCBN grade contains low CBN and fine grain structure, with high hardness (HV30~3500), PCD universal grade has medium grain structure, with high hardness (HV7000), outstanding efficiency machining of non-ferrous metal and non-metals. CN00 Cemented Carbide Grade Features: uncoated cemented carbide grade is widely applied for machining of non-ferrous metal, high temperature alloy, etc. It is economical and universal-applied. YC Finishing Steel YC40 Roughing Steel YD051 Finishing Cast iron YD1 Finishing Non-ferrous metal Heat resistant alloy Ti-alloy YD1 Semi-finishing Roughing Cast iron With Si3N4 substate, with high wear resistance and good toughness. It is recommended for finishing and semi-finishing of grey cast iron, malleable cast iron, chilled cast iron, die steel and other high hardness materials. With Si3N4 substate, it has excellent capacity against for finishing and roughing of grey cast iron, malleable cast iron, chilled cast iron, carbon steel, alloy steel, bearing steel, and chilled steel etc. Ceramic Grade CN00 With Si3N4, it has good wear resistance and and grey cast iron, and machining of die steel and other high hardness materials. 06