Pipe Support and Hanger Systems. Complete solutions for suspending all types of pipework

Transcription

1 Pipe Support and Hanger Systems Complete solutions for suspending all types of pipework

2 Trapeze No.2 Page 7 Universal Clamp Page 4 Introduction The Gripple range of pipe supports and hangers have been developed to provide a complete solution for suspending all types of pipework. Gripple s ready-to-use solution for pipework support includes the new and versatile range of Pipe Brackets, pre-fitted with Universal Clamps that can replace more than 11 different pipe sizes, and are compatible with high performance Kooltherm and Armaflex insulation and Gripple hanger systems. These products have been designed to save you time, labour and money by making the installation much quicker and easier. The products in this range eliminate the need for preparing different types of product assemblies for installation, as they are delivered to site pre-fabricated. 2

3 End fixing choices Page 7 Y-Fit Hanger Page 7 Pipe Bracket Page 6 Armaflex Pipe Collar Page 5 Kooltherm Pipe Collar Page 5 3

4 Installation Universal Clamp The Universal Clamp is engineered for hanging all types of pipework within mechanical and plumbing services. Universal - for pipe sizes 15 mm Copper (OD15) to 3 Steel (OD89) pipework Up to 6 times faster than traditional methods Replaces more than 11 different pipe ring sizes Retractable, removable sleeve is pre-fitted to wire rope to prevent galvanic corrosion Improved insulation against vibration No tools required for installation Easy site storage, reduces waste Simplifies take-off process Available up to 45 kg SWL, with a 5:1 safety factor Lloyd s certified Description Universal Clamp fully insulated. Wire length 400 mm. Safe working load 45 kg. Universal Clamp fully insulated. Wire length 600 mm for use on insulated pipework. Safe working load 45 kg. Non-insulated variations on request. Références GC2-M-400MM GC2-M-600MM Specifications: Universal clamp Working temperature: -40 C to +110 C Dual connection thread: Ø M8 / M10 Retractable sleeve Polyamide 66 (Nylon) Retracts up to 8 times its normal length Smoke toxicity conforms to CEI and CEI Resists chemical solvents Rubber pad Material: EPDM Hardness: 60 to 68 Shore A 4

5 Kooltherm and Armaflex Pipe Collars The Gripple pipe support system provides rapid installation, ensuring insulation continuity without thermal breaks. Space saving advantageous for applications in confined spaces or areas where space is at a premium Universal suitable for mild steel, stainless steel, copper and plastic pipes in a range of sizes (insulation specific, see below) High performance reduced heat loss and highly moisture resistant Simple to install, one click locking mechanism KoolTherm thermal efficiency range -50 C to +120 C and thermal conductivity as low as W/m K at 10 C Armaflex thermal efficiency range -183 C to +105 C and thermal conductivity as low as W/m K at 10 C Installation Armaflex Kooltherm Product KoolTherm Armaflex Pipe BS EN 1057 Copper Pipes BS 1387 Steel Pipes BS EN 1057 Copper Pipes BS 1387 Steel Pipes OD (mm) NPS (in) Product Code Description Max. Bracket Spacing for horizontal runs (m) GC2-KT-15-XX Insulated pipe support for 15 mm pipe GC2-KT-22-XX Insulated pipe support for 22 mm pipe GC2-KT-28-XX Insulated pipe support for 28 mm pipe GC2-KT-35-XX Insulated pipe support for 35 mm pipe GC2-KT-42-XX Insulated pipe support for 42 mm pipe GC2-KT-54-XX Insulated pipe support for 54 mm pipe GC2-KT-67-XX Insulated pipe support for 67 mm pipe GC2-KT-76-XX Insulated pipe support for 76 mm pipe GC2-KT-21-XX Insulated pipe support for 1 2 pipe GC2-KT-27-XX Insulated pipe support for 3 4 pipe GC2-KT-34-XX Insulated pipe support for 1 pipe GC2-KT-42-XX Insulated pipe support for pipe GC2-KT-48-XX Insulated pipe support for pipe GC2-KT-60-XX Insulated pipe support for 2 pipe GC2-KT-76-XX Insulated pipe support for pipe GC2-KT-89-XX Insulated pipe support for 3 pipe GC2-AF-15-XX Insulated pipe support for 15 mm pipe GC2-AF-22-XX Insulated pipe support for 22 mm pipe GC2-AF-28-XX Insulated pipe support for 28 mm pipe GC2-AF-35-XX Insulated pipe support for 35 mm pipe GC2-AF-42-XX Insulated pipe support for 42 mm pipe GC2-AF-54-XX Insulated pipe support for 54 mm pipe GC2-AF-67-XX Insulated pipe support for 67 mm pipe GC2-AF-76-XX Insulated pipe support for 76 mm pipe GC2-AF-21-XX Insulated pipe support for 1 2 pipe GC2-AF-27-XX Insulated pipe support for 3 4 pipe GC2-AF-34-XX Insulated pipe support for 1 pipe GC2-AF-42-XX Insulated pipe support for pipe GC2-AF-48-XX Insulated pipe support for pipe GC2-AF-60-XX Insulated pipe support for 2 pipe GC2-AF-76-XX Insulated pipe support for pipe GC2-AF-89-XX Insulated pipe support for 3 pipe 3.2 XX refers to insulation thickness (in mm); For KoolTherm, insulation thickness options are 15, 20, 25, 30, 40 or 50 mm. For Armaflex, insultion thickness options are 19, 25 or 32 mm. Therefore a Universal Clamp with KoolTherm insulation for use on 42OD pipe with 25 mm insulation is GC2-KT

6 PB380 with Universal Clamps PB640 with Universal Clamps Pipe Brackets Pipe Brackets are pre-fabricated with Universal Clamps and require no on-site cutting or assembly. Quick and easy installation - Pipe Brackets come pre-assembled with Universal Clamps at pre-set centres and are ready-to-use Versatile - Can be bolted directly to soffit or wall, or suspended at a length from the soffit Saves labour time - Eliminates the need for cutting channel on site, allowing more productive use of labour Universal - For pipe sizes 15 mm Copper (OD15) to 3 Steel (OD89) pipework Compatible - Integrates with Trapeze No.2 and Y-Fit kits Improves Health & Safety - No tools or Hot Works permit required for installation No sharp edges and no end caps required Mounting concepts Bolted directly to soffit Suspended from the soffit using Trapeze No.2 Suspended from soffit and double stacked Type Product Code No. of Pipes Orientation Product description 380 mm Pipe Bracket 640 mm Pipe Bracket PB380-2M8-150MM-GCI 2-150mm* spacing between Universal Clamps. Max. working load 90 kg PB380-3M8-150MM-GCI 3-150mm spacing between Universal Clamps. Max. working load 90 kg PB380-2/2M8-150MM-GCI 4 2 above, 2 below 150mm* spacing between Universal Clamps. Max. working load 90 kg PB380-2/3M8-150MM-GCI 4 2 above, 3 below 150mm spacing between Universal Clamps. Max. working load 90 kg PB380-3/3M8-150MM-GCI 4 3 above, 3 below 150mm spacing between Universal Clamps. Max. working load 90 kg PB640-4M8-150MM-GCI 4-150mm* spacing between Universal Clamps. Max. working load 90 kg PB640-5M8-150MM-GCI 5-150mm spacing between Universal Clamps. Max. working load 90 kg PB640-4/2M8-150MM-GCI 4 4 above, 2 below 150mm* spacing between Universal Clamps. Max. working load 90 kg PB640-4/3M8-150MM-GCI 4 4 above, 3 below 150mm* spacing between Universal Clamps. Max. working load 90 kg PB640-4/4M8-150MM-GCI 4 4 above, 4 below 150mm* spacing between Universal Clamps. Max. working load 90 kg PB640-4/5M8-150MM-GCI 4 4 above, 5 below 150mm spacing between Universal Clamps. Max. working load 90 kg PB640-5/2M8-150MM-GCI 4 5 above, 2 below 150mm spacing between Universal Clamps. Max. working load 90 kg PB640-5/3M8-150MM-GCI 4 5 above, 3 below 150mm spacing between Universal Clamps. Max. working load 90 kg PB640-5/5M8-150MM-GCI 4 5 above, 5 below 150mm spacing between Universal Clamps. Max. working load 90 kg * 200 mm spacing options also available. ** Longer, bespoke options using pre-cut strut are available on request. 6

7 Y-Fit Hanger Single point suspension for use when suspending balanced pipework. Ideal for suspending tray and basket Snap hook version is ideal for use with the Pipe Bracket Also available in a range of end fixings, with a variety of leg lengths Drop length Product recommendation < 2 m Y-Fit Hanger Max 60º > 2 m Y-Fit Accessory with a Standard Hanger Trapeze No.2 and No.3 Purpose-made for single and multi-tiered installations. Ideal for fast suspension of pipework brackets Also ideal for cable containment, air conditioning casettes and chilled beams Tapered design - accommodates all channel slot sizes Discreet - fits completely inside the channel Can be pre-fitted to Pipe Brackets to reduce working at height Pin allows rapid adjustment Aesthetic design Trapeze No.2 load rated at 45 kg with a 5:1 safety factor Trapeze No.3 load rated at 90 kg with a 5:1 safety factor Available as an accessory for multi-tiered installations Supplied as a ready-to-use kit Available with a wide range of end fixings (see below) Product code TZ2-LG-1M TZ2-S8G-1M TZ3-LG-1M TZ3-S8G-1M Product description 1 m Trapeze No.2 kit with Loop end fixing 1 m Trapeze No.2 kit with M8 Stud end fixing 1 m Trapeze No.3 kit with Loop end fixing 1 m Trapeze No.3 kit with M8 Stud end fixing * Other lengths and end fixings available on request. Do not hesitate to contact our sales department. Loop M8 Stud Toggle M8 Barrel Channel Nut Installation Clip information This clip pre-fits and holds the Trapeze onto the Pipe Bracket / channel. In preparation for working at height, simply clip onto the Trapeze unit. 7

8 Gripple Ltd (Headquarters) The Old West Gun Works Savile Street East Sheffield S4 7UQ UK UK Sales : Fax : +44 (0) info@gripple.com Gripple Europe SARL Gripple Inc Gripple Benelux Gripple Portugal 1, rue du commerce BP Obernai Cedex France T +33 (0) F +33 (0) E frinfo@gripple.com 1611 Emily Lane Aurora IL USA T F E usinfo@gripple.com Brusselstraat Antwerpen België T +32 (0) F +31 (0) E nlinfo@gripple.com Estrada Nacional 4 Km 46,5 Pontal Pegões Portugal T F E ptinfo@gripple.com Gripple GmbH Gripple s.r.l Gripple Industrial Ibérica, S.L. Gripple Australia / NZ Pariser Ring Baden-Baden Deutschland Via Ponte Pietra, Bergamo BG Italia Ctra. Logroño km 7, 3 Pol. Europa Zaragoza España Polyplas Pty Ltd, 30 Sydney Rd Bayswater, Victoria 3153 Australia T +49 (0) F +49 (0) E deinfo@gripple.com T +39 (0) F +39 (0) E itinfo@gripple.com T +34 (0) F +34 (0) E esinfo@gripple.com T +61 (0) F +61 (0) E auinfo@gripple.com 2013 Gripple Gripple is a registered trademark of Gripple Limited, Company registered in England No , VAT Reg No. GB BROC-IND-PIPSOL-ENG 8