TEST REPORT. Rendered to: UNIVERSAL PULTRUSIONS, LLC Marshall, Arkansas. Cycles 2,000,000. Summary of Results

Transcription

1 Architectural Testing TEST REPORT Report No.: C Rendered to: UNIVERSAL PULTRUSIONS, LLC Marshall, Arkansas PRODUCT TYPE: Side-Hinged Door SERIES/MODEL: 3070 Fiberglass Door SPECIFICATION: AAMA Specification for Operating Cycle Performance of Side- Hinged Exterior Door Systems Title Summary of Results Cycles 2,000,000 Test Completion Date: 09/28/12 Reference must be made to Report No. C , dated 07/01/13 for complete test specimen description and detailed test results.

2 Page 1 of Report Issued To: Universal Pultrusions, LLC 100 Tillco Drive Marshall, Arkansas Test Laboratory: Architectural Testing, Inc. 849 Western Avenue North St. Paul, Minnesota Project Summary: 3.1 Product Type: Side-Hinged Door 3.2 Series/Model: 3070 Fiberglass Door 3.3 Compliance Statement: Results obtained are tested values and were secured by using the designated test method. 3.4 Test Dates: 06/12/ /28/ Test Location: Architectural Testing, Inc. test facility in St. Paul, Minnesota. 3.6 Test Sample Source: The test specimen was provided by the client. 3.7 Drawing Reference: The test specimen drawings have been reviewed by Architectural Testing and are representative of the test specimen reported herein. Test specimen construction was verified by Architectural Testing per the drawings located in Appendix A. Any deviations are documented herein or on the drawings. 3.8 List of Official Observers: Name Eric J. Schoenthaler Company Architectural Testing, Inc. 4.0 Test Specification: AAMA Specification for Operating Cycle Performance of Side-Hinged Exterior Door Systems

3 Page 2 of Test Specimen Description: 5.1 Product Sizes: Overall Area: Width Height 2.2 m² (23.9 ft 2 ) millimeters inches millimeters inches Overall size Leaf size / /4 5.2 Frame Construction: Frame Member Material Description All Fiberglass 5-3/4" deep. Head to jamb Joinery Type Miter Detail 5.3 Leaf Construction: Leaf Member Material Description Outer skins FRP 0.120" FRP. 5.4 Weatherstripping: No weatherstripping was utilized. 5.5 Drainage: No drainage was utilized. 5.6 Hardware: Description Quantity Location 4-1/2" hinges 3 Panel hinge stile and frame jamb; 181 mm (7-1/8"), 1000 mm (39-3/8") and 1819 mm (71-5/8") from the top of the panel. 5.7 Reinforcement: No reinforcement was utilized. 6.0 Installation: The specimen was installed into a steel buck. The rough opening allowed for a 3 mm (1/8") shim space. Location Anchor Description Anchor Location Jambs 1/4" x 3" bolt 305 mm (12") from head and sill and midspan.

4 Page 3 of Test Results: The temperature during testing was 21 C (70 F). The results are tabulated as follows: Title of Test Results Allowed Operation/Cycling Performance, per AAMA 920 2,000,000 cycles Pass Meets as stated The service life of this report will expire on the stated Test Record Retention End Date, at which time such materials as drawings, data sheets, samples of test specimens, copies of this report, and any other pertinent project documentation, shall be discarded without notice. If test specimen contains glazing, no conclusions of any kind regarding the adequacy or inadequacy of the glass in any glazed test specimen can be made. This report does not constitute certification of this product nor an opinion or endorsement by this laboratory. It is the exclusive property of the client so named herein and relates only to the specimen tested. This report may not be reproduced, except in full, without the written approval of Architectural Testing, Inc. For ARCHITECTURAL TESTING, Inc. Eric J. Schoenthaler Project Manager Daniel A. Johnson Director Regional Operations EJS/jb Attachments (pages): This report is complete only when all attachments listed are included. Appendix-A: Drawing (1) This report produced from controlled document template ATI 00499, issued 04/25/11.

5 Appendix A Drawing

6