PORTISO is a company dedicated to the manufacturing of isothermal doors built to satisfy the different needs of any industrial sector.

Transcription

1

2

3 PORTISO is a company dedicated to the manufacturing of isothermal doors built to satisfy the different needs of any industrial sector. We have modern manufacturing facilities in France, UK and Portugal, where the latest technological advances are incorporated into our machinery and our personnel undergo rigorous training. We manufacture over 20,000 doors year after year, distributed throughout the main European countries as well as in the Maghreb. We have licenses in India and in Morocco. We are committed to providing top-quality products and services, offering a beautiful, reliable and highly durable product, using only the best quality materials with proven resistance, which are also subjected to strict testing methods in our laboratories. An important part of our resources is dedicated to the development of new products through our R+D department, thanks to our multinational experience in different markets and our expert technicians in the sector. DOOR CATALOGUE Warehouses in general, chemical industries, as well as pharmaceutical, food and agriculture, sanitary, collectives, hotel and restaurant businesses; these are only a few of the many sectors where our products are present. From this catalogue, we invite you to enter the PORTISO world and discover the infinite possibilities we have in store for you, your trust is our best reward. PORTISO guarantees: Design Toughness Easy Assembly Durability Manufacturing facility in Peyrat Le Chateau (France)

4 Commercial hinged door For personnel, pallet and handtruck traffic. Application Usage Interior or exterior in coldrooms both for chillers and freezers Injected polyurethane insulation, density of 40 kg/m 3 Standard white food safe laminate, coated with P.E. film Insulation thickness: - 60 mm for chillers, with superimposed panel mm for freezers, with semi-inset panel Full perimeter seal, pressure mounted on PVC profile Maximum clearance limit in width 1,200 mm Manufactured in extruded aluminium profiles Side extension profiles to suit any panel thickness Standard finish in Stainless anodised aluminium finish Grey hinges in 2 part polyamide, with lift ramps and stainless steel coupling pin One-point blue and grey lock, equipped with locking latch Interior safety release latch Anti-panic bar kit Double glass 340 x 640 mm vision panel with air chamber framed in aluminium profile (chilling only) Overhead track flan insulation in PIR insulation in M1 polyurethane lacquered in white RAL 9010 finish in A-304 stainless steel finish in PVC finish in RAL colours: Hinge Lock

5 Industrial hinged door For handtruck, pallet and forklift traffic. Application Usage Interior or exterior in coldrooms both for chillers and freezers Injected PIR insulation, density of 40 kg/m 3 Standard food safe laminate white, coated with P.E. film Insulation thickness: - 85 & 105 mm for chilling mm for freezing mm for freezing tunnel Full perimeter seal, pressure mounted on PVC profile Bottom seal on PVC profiles Maximum clear opening width 1,600 mm manufactured with extruded aluminium profiles Side extension profiles to suit any panel thickness Standard finish in Stainless anodised aluminium finish Grey hinges in 2 part polyamide, with lift ramp and stainless coupling pin Grey 3-point lock in painted zamac Overhead track flan finish RAL 9010, lacquered in white finish in A-304 stainless steel finish in PVC finish in RAL colours: Hinge Lock Hinge

6 Commercial sliding door For medium-density pedestrian, hand truck, pallet and forklift traffic. Application Exterior in coldrooms or refrigerated tunnels both for chillers and freezers Injected polyurethane insulation, density of 40 Kg/m 3 Standard white food safe laminate, coated with P.E. film Insulation thickness: - 85 & 105 mm for chilling mm for freezing Full perimeter seal, pressure mounted on PVC profile bottom edge seal screwed to sheet bottom, with PVC tensioner Maximum clearance limit 2,000 x 2,500 mm (Width x Height) manufactured in extruded aluminium profiles Side extension profiles to suit any panel thickness Standard finish in Stainless anodised aluminium finish Sliding rail in FERMOD anodised aluminium profile Interior and exterior handle in chilling temperature Interior and exterior release latch in freezing temperature Locking match Overhead track flap with uninterrupted lifted guide rail insulation in M1 polyurethane Exterior release latch (chilling) lacquered in white RAL 9010 finish in A-304 stainless steel finish in PVC finish in RAL colours: Handle Sliding rail

7 Industrial sliding door For medium-density pedestrian, hand truck, pallet and forklift traffic. Application Exterior in coldrooms or refrigerated tunnels both for chillers and freezers Injected polyurethane insulation, density of 40 Kg/m 3 Standard white food safe laminate, coated with P.E. film Insulation thickness: - 85 & 105 mm for chilling mm for freezing mm for freezing tunnel Full perimeter seal, pressure mounted on PVC profile Bottom seal on PVC profiles Maximum clearance limit in width 3,000 mm manufactured in extruded aluminium profiles Side extension profiles to suit any panel thickness Standard finish in Stainless anodised aluminium finish Fermod sliding rail in zinc coated steel profile and model white lacquered, with interior and exterior release latch. Sliding rail in AISI-304 stainless steel profile Wall mounted guide system Automatic opening Locking match Overhead track flap with uninterrupted lifted guide rail insulation in M1 polyurethane lacquered in white RAL 9010 finish in A-304 stainless steel finish in PVC finish in RAL colours: Handle Sliding rail

8 40 mm double-hinged door For pedestrian, hand truck and forklift traffic. Application To separate working areas, halls and adjoining spaces with temperatures over +12 ºC. Injected polyurethane insulation, density of 40 kg/m 3 Standard white food safe laminate, coated with P.E. film Insulation thickness: 40 mm Wing-type protections in AISI-304 stainless steel on both sides of the panel 340 x 640 mm vision panel with tempered glass, assembled on EPDM with rounded edges Adjustment longitudinal seal assembled on aluminium guide rail profile, on opposite side to the hinges manufactured in extruded aluminium profiles Side extension profiles to suit any panel thickness 60 mm extendable edge profile at both ends for adapting to any panel thickness Standard finish in Stainless anodised aluminium finish Hinges manufactured in grey composite, with 90º angle blocking mechanism flush mounted on panel, and nuts and bolts in stainless steel. Overhead track flan insulation in M1 polyurethane Protection in AISI-304 stainless steel, height 880 mm Protection in polyethylene 7 mm, height 880 mm finishing in RAL 9010, lacquered in white finish in A-304 stainless steel lacquered in white RAL 9010 finish in PVC finish in RAL colours: Hinge Vision panel

9 Polyethylene hinged-door For pedestrian, hand truck and forklift traffic. Application To separate working areas, halls and adjoining spaces with temperatures over +12 ºC. Made up by 15 mm thick high-density polyethylene sheet with 40 mm thick vertical reinforcing (hinge side), both manufactured by pressing 7 mm thick polyethylene protections on both side of the door manufactured by pressing Assembly with stainless steel nuts and bolts 340 x 640 mm vision panel with tempered glass, assembled on EPDM with rounded edges Adjustment longitudinal seal assembled on slat-guide rail on panel, on opposite side to the hinges Maximum clearance limit in width 2,500 mm Maximum span measurement clearance between frames 2,600 mm manufactured in extruded aluminium profiles Side extension profiles to suit any panel thickness 60 mm extendable edge profile at both ends for adapting to any panel thickness Standard finish in Stainless anodised aluminium finish Hinges manufactured in grey composite, with 90º angle blocking mechanism flush mounted on panel, and nuts and bolts in stainless steel. Overhead track flan Protection in AISI-304 stainless steel, height 880 mm lacquered in white RAL 9010 Stainless anodised aluminium finish frame finish in RAL colours: Wing-type protections in AISI-304 stainless steel Hinge Vision panel

10 Service doors For pedestrian traffic. Application Interior or exterior, for offices, changing rooms, bathrooms... Injected polyurethane insulation, density of 40 kg/m 3 Standard food safe laminate white, coated with P.E. film Insulation thickness: 40 mm Maximum clearance limit in width 2,044 mm manufactured in extruded aluminium profiles Side extension profiles to suit any panel thickness Extension profiles to adapt to any panel thickness Vertical and upper closing seal Standard finish in Stainless anodised aluminium finish Hinges in AISI-304 stainless steel Locking latch and European cam lock Interior and exterior handles in AISI-304 stainless steel Anti-panic bar kit Interior locking action 340 x 640 mm vision panel with 6 mm polycarbonate framed in seal EPDM insulation in M1 polyurethane Standard finishing in RAL 9010, lacquered in white Hydraulic closing system Rubber wiper gasket lacquered in white RAL 9010 Protection in 6/10 stainless steel, height 880 mm finish in A-304 stainless steel finish in PVC finish in RAL colours: Hinge Handle

11 Strip Curtains For personnel, pallet and handtruck traffic. Application They prevent draughts in coldrooms. They are used for authorised separation of rooms with a similar temperature Made up of changeable 200 x 2 mm flexible PVC strips 50% coating Usage in positive and negative temperatures Strip support with polyethylene hinged parts Curtain support with polyethylene fixed parts Guide rail support with PVC tubular profile Polyethylene side plugs Either flat fixing to wall, or suspended on lintel Sliding in one direction with sliding profile in aluminium Sliding in two directions with sliding profile in aluminium Polyethylene support

12 Double panel door For large volume, high-density forklift traffic, industrial or warehouse usage Application For chiller and freezer coldrooms manufactured in epoxy-coated out of galvanised steel, and oven-lacquered in 25 microns thick polyester, food quality Insulation is 60 to 160 mm injected polyurethane density of +/- 42 kg/m 3 Full perimeter rubber seals on frame and underneath the door, intermediate seal between panels, and single/double wiper gasket on bottom edge manufactured in polyester with pultrusion, or stainless steel 304 L, fixed by means of hardware covered by a profile. Balancing: Counterweight set, hung from 6 mm steel cable, with safety system in the event that it breaks, by interlocking. Upper hinges in aluminium Intermediate hinges in stainless steel Exterior zip lock in anodised aluminium, with two adjustable locking points Exterior handle in stainless steel Caster wheels in Ertalon assembled on stainless mechanism Finishing Standard white ref Stainless steel 304 L Polyester 3 mm in option Electric motor Protections on lower part of panel Vision panels with double glass Hinge Handle Vision panel

13 Guillotine door For large volume, high-density forklift traffic, industrial or warehouse usage Application For chiller and freezer coldrooms manufactured in epoxy-coated out of galvanised steel, and oven-lacquered in 25 microns thick polyester, food quality Insulation is 60 to 160 mm injected polyurethane density of +/- 42 kg/m 3 Full perimeter rubber seals on frame and underneath the door, and single/double wiper gasket on bottom edge. manufactured in polyester with pultrusion, or stainless steel, and locking profile in insulated lacquered sheet, or 304 L stainless steel, fixed by means of hardware covered by a profile. Balancing: Counterweight set, hung from 6 mm steel cable, with safety system in the event that it breaks, by interlocking. Exterior zip lock in anodised aluminium, with two adjustable locking points Exterior handle in stainless steel Caster wheels in Ertalon assembled on stainless mechanism Finishing Standard RAL 9010 Polyester 3 mm 304 L stainless steel, optional Electric motor Protections on lower part of panel Vision panels with double glass Handle

14 REFERENCES Portiso has been manufacturing high quality isothermal doors since These are some of the many companies in the UK that have trusted Portiso. Co-Operative CLIENT Tesco Lewis Pies Maddock & Kembery Meats Asda Bledina Bonduelle Sanofi Lidl Nestle Pescanova Group Carrefour Group Dia Eroski Group TYPE Supermarket chain Supermarket chain Bread & confectionery manufacturer Meat Abattoir Supermarket chain Baby food producer Vegetable producer Laboratories Supermarket chain Food producer Frozen fish producer Supermarket chain Supermarket chain Supermarket chain

15

16 PO-C-EN-09V1