INSULATORS NEW. See page J-4 for more information.
|
|
- Brandon Cobb
- 6 years ago
- Views:
Transcription
1 INSULATORS
2 INSULATORS NEW Improved Dead End/Suspension Insulator Salisbury s Improved Dead End/Suspension Insulator has aluminum end fittings. These new end fittings create a lightweight product that is easier to handle and provides a 15,000 pound ultimate tensile strength. The new aluminum end fittings withstands corrosion better than the previous galvanized steel SI series insulators, adding to the life of the insulator. 100% proof testing ensures trouble-free installation. The insulator was tested in accordance with ANSI C29 and IEC1109. See page J-4 for more information. L-2 Insulators.
3 SALVAR & Silicone Insulators SALVAR & Silicone Composite Insulators combine the technologies of fiberglass reinforced rod, metal fittings and our extensive knowledge of elastomeric insulation to produce a high quality composite insulator. Since 1980 thousands of SALVAR and Silicone Insulators have been installed by utilities worldwide in a variety of environments. Continued outstanding performance is proof of their superior quality and design. Design: Two designs are used to manufacture SALVAR and Silicone Insulators: Unibody and Modular. Unibody Design insulators are one-piece injection molded directly to the rod and sealed to the end fittings with a bead of silicone to give the insulator high dielectric strength and protect it from all environmental conditions. This design is used for standard distribution dead end/suspension insulators. Fiberglass Rod: A high quality fiberglass reinforced rod is the core of every insulator with ultimate mechanical strength at least twice the maximum working load. End Fittings: Standard distribution dead/end suspension units are supplied with clevis and tongue fittings meeting ANSI C29-2 specifications. Ball, socket, and eye fittings are also available. All are made of hot dipped galvanized high strength carbon steel and have an ultimate tensile strength rating of 15,000 pounds. All end fittings on dead/ end suspension insulators are attached by compression. Every insulator is proof tested to verify the crimp. Unibody insulators have end fittings sealed with silicone to eliminate any possibility of moisture or contamination from reaching the fiberglass rod. 101 E. Crossroads Pkwy., Ste. A Bolingbrook, IL toll free ph (USA): toll free fax (USA): ph: L-3
4 SI Series Silicone Insulator & New Aluminum Option 15kV to 35kV Dead End/Suspension, Tongue & Clevis The SI Series of Silicone Insulators features a silicone formulation weathershed material. Salisbury combined the excellent hydrophobic and electrical qualities of silicone with an optimum weathershed design and corrosion resistant fiberglass rod to produce a state-of-theart insulator which meets or exceeds industry requirements. The insulators were tested in accordance with ANSI C29 and IEC1109. End fittings are hot dipped galvanized high strength carbon steel, providing a 15,000 pound ultimate tensile strength. 100% proof testing ensures trouble-free installation. RUS Accepted. Unibody insulators have end fittings sealed with silicone to eliminate any possibility of moisture or contamination from reaching the fiberglass rod. NEW Salisbury s Improved Dead End/ Suspension Insulator has aluminum end fittings. These new end fittings create a lightweight product that is easier to handle and provides a 15,000 pound ultimate tensile strength. The new aluminum end fittings withstands corrosion better than the previous galvanized steel SI series insulators, adding to the life of the insulator. 100% proof testing ensures trouble-free installation. This insulator includes the same silicone weathershed material as th SI Series The insulator was tested in accordance with ANSI C29 and IEC U-SI 9502U-SI U-SI Class DS-15 DS-28 DS-28 DS-35 No. of Weathersheds Length-in ( m ) 13.5 (.34 ) 17.5 (.45 ) 17.5 (.45 ) 21.3 (.54 ) Dia. of Weathersheds-in ( mm ) 3.8 ( 97 ) 3.8 ( 97 ) 3.8 ( 97 ) 3.8 ( 97 ) Leakage Distance-in ( m ) 17.1 (.44 ) 26(.66 ) 26(.66 ) 35.1 (.89 ) Dry Arc Distance-in ( m ) 8.4 (.22 ) (.31 ) (.31 ) 16 (.41 ) Flash Over Voltage Critical Impulse, Pos Critical Impulse, Neg Dry, 60 Hz Wet, 60Hz Radio Influence Test, kv Ground Max RIV-1000kHz µv uV Ultimate Strength lbs. 15,000 15,000 15,000 15,000 FRP Rod Dia.-in ( mm ).73 ( ).73 ( ).73 ( ).73 ( ) Typ. Appl-kV, Ø-Ø Net Weight ea.-lbs. ( kgs ) 2.6 ( 1.20 ) 3.1 ( 1.39 ) 2.2 (.99 ) 3.5 ( 1.57 ) L-4 Insulators.
5 The 9502L-EP Silicone Insulator 27kV The 9502L-EP Silicone Insulator combines two essential characteristics: PERFORMANCE - The 9502L-EP is the only composite insulator manufactured as a replacement for two 10 (254mm) porcelain disks. Installation is limited to horizontal dead-end applications only. INNOVATION - Unlike any other insulator on the market, the unique shed design of the 9502L-EP minimizes the material content without compromising electrical or dimensional requirements. End fittings are hot dipped galvanized high strength carbon steel. Must be used as a dead end insulator only. RUS Accepted. 9502L-EP No. of Weathersheds 5 Length-in ( m ) 11.5 (. 29 ) Dia. of Weathersheds-in ( mm ) 5 ( 127 ) Leakage Distance-in ( m ) 22 (.56 ) Electrical Critical Impulse 189 Ratings Dry, 60 Hz 116 kv Wet, 60 Hz 92 Radio Test--kV Ground 20 Influence Max RIV--1000Hz µv 1 Typ. Appl--kV, Ø-Ø 27 Ultimate Strength-SML- lbs / kn / 70 Net Weight ea.-lbs ( kgs ) 2.8 ( 1.3 ) 101 E. Crossroads Pkwy., Ste. A Bolingbrook, IL toll free ph (USA): toll free fax (USA): ph: L-5
6
DISTRIBUTION SILICONE INSULATORS Deadend / Suspension 15 kv to 69 kv
K-LINE INSULATORS LIMITED TORONTO, ONTARIO, CANADA Catalogue D-DS DISTRIBUTION SILICONE INSULATORS Deadend / Suspension 15 kv to 69 kv ISO9001 SAI GLOBAL FILE No. 000117 Distribution Silicone Insulators
More informationTransmission Silicone Insulators Line Post 69 kv to 230 kv
K-LINE INSULATORS LIMITED Catalogue T-LP Transmission Silicone Insulators Line Post 69 kv to 230 kv ISO9001 SAI GLOBAL FILE No. 000117 Transmission Silicone Insulators Line Post Today transmission lines
More informationPolymer Suspension Insulators 69kV to 765kV
CATALOG Polymer Suspension Insulators 69kV to 765kV NGK Locke Polymer Insulators, Inc. Virginia Beach, Virginia, U.S.A. TABLE of CONTENTS Table of Contents... 1 Design Features... 2 Material... 2 Definition
More informationGROUP A. Polymeric Insulators.
GROUP A Polymeric Insulators PYUNGIL Bldg., 1475-10, Gwanyang 2-dong, Dongan-gu, Anyang-si, Gyeonggi-do, 431-808, Korea Tel : 82-31-420-6650~3 FAX : 82-31-424-7300 www.pyungil.com Silicone Railway
More informationEnergy Division Insulators
Energy Division http://energy.tycoelectronics.com Insulators R Insulators Tyco Electronics Energy Division covers a wide range of polymeric, hybrid and porcelain insulators. For decades all these products
More informationTRANSMISSION & DISTRIBUTION SILICONE INSULATORS InterPhase Spacers 15 kv to 400 kv
K-LINE INSULATORS LIMITED Catalogue TD-IPS TORONTO, ONTARIO, CANADA TRANSMISSION & DISTRIBUTION SILICONE INSULATORS InterPhase Spacers 15 kv to 400 kv ISO9001 SAI GLOBAL FILE No. 000117 Transmission &
More informationINSULATORS. Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle.
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/ documentaty style or portrait of engineer. industry photo.
More informationCS type composite silicone insulators up to 750 kv overhead lines for all pollution of the atmosphere levels
Climate test equipment. Allows to perform test in various temperature and humidity conditions. CS type composite silicone insulators up to overhead lines for all pollution of the atmosphere levels Insulators
More informationVeri*Lite Deadend, Suspension & Line Post Insulators for 15-69kV Applications
Veri*Lite Deadend, Suspension & Line Post Insulators for 569kV Applications Section Warranty Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined
More informationDESIGN TEST REPORT. GAMMA Insulators 6184R-70 ANSI Class 55-3 Pin Type Insulator..
December 4, 2010 DESIGN TEST REPORT Insulator Reference: GAMMA Insulators 6184R-70 ANSI Class 55-3 Pin Type Insulator.. Electrical Design Tests 1. Low-Frequency Dry Flashover Test: Three insulators were
More informationDESIGN TEST REPORT. GAMMA Insulators 7061R-70 ANSI Class 55-5 Pin Type Insulator.
December 6, 2010 DESIGN TEST REPORT Insulator Reference: GAMMA Insulators 7061R-70 ANSI Class 55-5 Pin Type Insulator. Electrical Design Tests 1. Low-Frequency Dry Flashover Test: Three insulators were
More informationDESIGN TEST REPORT. GAMMA Insulators 6183R-70 ANSI Class 55-4 Pin Type Insulator.
December 2, 2010 DESIGN TEST REPORT Insulator Reference: GAMMA Insulators 6183R-70 ANSI Class 55-4 Pin Type Insulator. Electrical Design Tests 1. Low-Frequency Dry Flashover Test: Three insulators were
More informationTEMPORARY PROTECTIVE GROUNDING EQUIPMENT
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT TEMPORARY PROTECTIVE GROUNDING EQUIPMENT NOTE: When ordeing assemblies of grounding products, please make sure all items included in the assembly are only from
More information30-SDMS-01 SPECIFICATIONS FOR LOAD BREAK SWITCH
SPECIFICATIONS FOR LOAD BREAK SWITCH This specification is property of SEC and subject to change or modification without any notice TABLE OF CONTENTS 1.0 SCOPE 3 2.0 CROSS REFERENCES 3 3.0 APPLICABLE CODES
More informationPolymer Station Post Insulators for 69 to 345 kv Applications
CATALOG 143 Polymer for 69 to 34 kv Applications NGK-Locke Polymer Insulators, Inc. Virginia Beach, Virginia, U.S.A. TABLE of CONTENTS Polymer... 1 Application Guidelines for Polymer Station Posts (SP)...
More informationData Sheet 110kV TD123II dry type outdoor termination
3 Data Sheet 110kV TD123II dry type outdoor termination 1. Product Description: 3M 110kV TD123II dry type outdoor termination meets requirement of test and product according to IEC60840 and GB11017.3,
More informationUnited States Department of Agriculture Rural Development Rural Utilities Service. RUS Bulletin 1724E-220
United States Department of Agriculture Rural Development Rural Utilities Service RUS Bulletin 1724E-220 SUBJECT: Procurement and Application Guide for Non-Ceramic Composite Insulators, Voltage Class 34.5
More informationPower Systems 2 ELE3015. Lecture 1: Transmission Lines
Power Systems 2 ELE3015 Lecture 1: Transmission Lines Transmission Lines: Introduction Use to carry electrical power from point of generation to the point of use. Usually over large distances. Made with
More informationGeneral Requirements. Technical Specifications for Insulators of Transmission Lines
Islamic Republic of Iran Vice Presidency for Strategic Planning and Supervision General Technical Specification and Execution Procedures for Transmission and Subtransmission Networks Insulators of Transmission
More informationTRANSMISSION NEW PROJECTS DEPARTMENT TRANSMISSION LINES TOWER DESIGN AND SPECIFICATIONS SECTION ATHENS - GREECE SPECIFICATION TR-1
I NDEPENDE N T POWER TR ANSM ISSION OP ER AT O R S.A. TRANSMISSION NEW PROJECTS DEPARTMENT TRANSMISSION LINES TOWER DESIGN AND SPECIFICATIONS SECTION ATHENS - GREECE SPECIFICATION TR-1 STRING INSULATOR
More informationGSCH004 Rev /10/2016
GLOBAL STANDARD Page 1 of 28 INSULATORS Elaborated by Verified by Approved by High Voltage SDC HV SDC - M. A. Caballero HV SDC - J.A. Lama Head of NCS - F. Giammanco Global I&N NT/NCS HV SDC - T. González
More information8. Hydrophobicity classification guide STRI guide 1.92/1 9. Radio interference characteristics of overhead power lines and high-voltage equipment
Revised in Jan 14 TECHNICAL SPECIFICATION FOR 11KV POLYMER INSULATORS (C&T) 1.0. Scope This specification covers design, manufacture, testing and supply of composite insulators for use in the 11KV overhead
More informationTEMPERED GLASS INSULATORS
TEMPERED GLASS INSULATORS SUSPENSION-TYPE» Non-conducing support composed of an insulating glass piece and iron fittings allowing other units to be connected in series. A fastening iron fitting is included
More informationGUJARAT ENERGY TRANSMISSION CORPORATION LTD. TECHNICAL SPECIFICATIONS
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA 390 007. TECHNICAL SPECIFICATIONS FOR 220, 132 & 66 COMPOSITE SOLIDCORE STATION POST INSULATORS GETCO/E/2,1,6
More informationSPECIFICATION FOR 11 & 33kV COMPOSITE INSULATORS Part 1: Pin Type
Doc. KPLC1/3CB/TSP/04/017/1 1 Page 1 of 7 TABLE OF CONTENTS 0.1 Circulation List 0.2 Amendment Record FOREWORD 1. SCOPE 2. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6.
More informationNotes Changed note Date. 1 (A) Changed template 09 / 07 / 2008
Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4
More informationComposite insulators. Features. Sicat 8WL3068, 8WL3078 and 8WL3088 for overhead contact line systems. siemens.com/rail-electrification
Composite insulators Sicat 8WL3068, 8WL3078 and 8WL3088 for overhead contact line systems siemens.com/rail-electrification The Sicat 8WL3068, 8WL3078 and 8WL3088 type silicone composite insulators in accordance
More informationSpecification for Polymer Disc Insulator
Specification for Polymer Disc Insulator Scope : This specification cover the design, manufacturing, testing at manufacturers works, transport to site, insurance, storage of 11 KV & 33 KV Polymer Disc
More informationGeneral Technical Specification and Execution Procedures for Transmission and Subtransmission Networks Substation Insulators (63 kv- 400 kv)
Islamic Republic of Iran Vice Presidency for Strategic Planning and Supervision General Technical Specification and Execution Procedures for Transmission and Subtransmission Networks Substation Insulators
More information5 / 8" AFL NO. ULTIMATE STRENGTH (LBS.) APPROX. WEIGHT EACH (LBS.) APPLICATION SCE , HIBUS Double Suspension R1"
Standard Clevis Eye (TYP.) C L C L 2 C L Hot Dip Galvanized Ductile Iron C L SCE--62-BC APPLICATION SCE--62 2,000. HIBUS Double Suspension NOTE: For Bolt, Nut and Cotter instead of Clevis Pin and Cotter,
More informationComposite Insulator Components
Composite Insulator Components Composite insulator components A composite insulator is made of at least two insulating parts a core and housing. It is equipped with end fittings. Core. The core is the
More information094: 2000 CEB STANDARD. MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEYLON ELECTRICITY BOARD SRI LANKA
094: 2000 CEB STANDARD MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEYLON ELECTRICITY BOARD SRI LANKA Specification for MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEB Standard
More informationCOMPOSITE INSULATORS
Maharashtra State Electricity Distribution Co. Ltd. SPECIFICATION NO.MSEDCL/ DIST: MM-III/07/2007 SPECIFICATION FOR 11 KV/22 KV/33 KV COMPOSITE INSULATORS 1 TECHNICAL SPECIFICATION FOR 11 KV/22 KV/33 KV
More informationSPECIFICATION FOR POLYMER DISC INSULATOR
SPECIFICATION FOR POLYMER DISC INSULATOR Scope : This specification cover the design, manufacturing, testing at manufacturers works, transport to site, insurance, unloading & storage of 11 KV & 33 KV Polymer
More informationFIJI ELECTRICITY AUTHORITY BIDDING DOCUMENT
FIJI ELECTRICITY AUTHORITY BIDDING DOCUMENT MR 15/2018 PREFERRED SUPPLIER FOR 33KV INSULATORS i Section 1: Instructions to Bidders 1. Scope of Bid The Fiji Electricity Authority (hereinafter referred to
More informationVeri*Lite Silicone Rubber Line Post Insulators for 15-72kV Applications
Section 2-2 Veri*Lite Silicone Rubber Line Post Insulators for 15-72kV Applications Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is
More informationPolymer Post Insulators for 46 to 500kV Applications
CATALOG 142 Polymer Post Insulators for 46 to 500kV Applications NGK-Locke Polymer Insulators, Inc. Virginia Beach, Virginia, U.S.A. TABLE of CONTENTS Process and Design Features...2 Materials...3 Application
More informationIEEE T&D Insulators 101
Insulators 101 Section A Introduction Presented by Andy Schwalm IEEE Chairman, Lightning and Insulator Subcommittee IEEE/PES 2010 Transmission and Distribution Conference and Exposition New Orleans, Louisiana
More informationPins Insulator. Composite/Polymers Insulators
Composite/Polymers Insulators Electric network in India operates under very harsh environments. Industrial pollution, marshy land, hilly and unfriendly terrain, extreme weather, coastal region etc. make
More information093 : 2000 CEB STANDARD MEDIUM VOLTAGE PIN POST INSULATORS AND HARDWARE CEYLON ELECTRICITY BOARD SRI LANKA
093 : 2000 CEB STANDARD MEDIUM VOLTAGE PIN POST INSULATORS AND HARDWARE CEYLON ELECTRICITY BOARD SRI LANKA Specification for MEDIUM VOLTAGE PIN POST INSULATORS AND HARDWARE CEB Standard 093 : 2000 CEYLON
More informationHeight Pole Care and Maintenance
Height Pole Care and Maintenance Updated 9/1/2016 Page 1 9 TABLE OF CONTENTS INTRODUCTION...3 NEW HEIGHT POLE TESTING...3 FIELD CARE OF HEIGHT POLE...3 FIELD CLEANING...3 COMPLETE CLEANING OF HEIGHT POLE...
More informationNATIONAL ELECTRIC POWER COMPANY (NEPCO) TENDERNO. 9/2013 FOR THE SUPPLY OF INSULATORS AND FITTINGS FOR DOUBLE AND QUADRUPLE CIRCUITS 132 kv OHTL's
TENDERNO. 9/2013 7. TECHNICAL SPECIFICATION 7.A SCOPE: This specification covers the design, manufacture, testing, packing, supply, CFR delivery to Aqaba Docks in Jordan and guarantee (maintain) the following
More informationSediver composite suspension insulators
Sediver composite suspension insulators ANSI USA/Canada 2008 This catalog presents a selection of the Sediver composite insulators suspension type for AC applications answering the needs of North-American
More informationTechnical Specification for Helical Fittings for Overhead Power Lines
Ergon Energy Corporation Limited Technical Specification for Helical Fittings for Overhead Power Lines ETS01-09-03 Specification ETS01-09-03 Ver 3 Contents 1. Purpose and Scope... 4 2. References... 4
More informationHIGH VOLTAGE INSULATORS. By JP Holtzhausen. Glass. Bushings & hollow core insulators. Cap & pin insulators
HIGH VOLTAGE INSULATORS By JP Holtzhausen The principal dielectric used on overhead power lines is air at atmospheric pressure. The air, surrounding the bare high voltage aluminium or steel- cored aluminium
More informationPrototype Test Report ANSI C29.17 Quadri*Sil Line Post Insulators 2.5 Dia. Rod HPS Silicone rubber R
PAGE: 1 Test Requests: R18-01-03 Report Number: R18-01-03 Prototype Test Report ANSI C29.17 Quadri*Sil Line Post Insulators 2.5 Dia. Rod HPS Silicone rubber R18-01-03 Introduction: Sample Quadri*Sil line
More informationFOREWORD SCOPE NORMATIVE REFERENCES DEFINITIONS REQUIREMENTS... 4
INSULATORS VERTICAL & HORIZONTAL MOUNTING - SPECIFICATION Page 1 of 20 Table of Contents FOREWORD... 2 1. SCOPE... 2 2. NORMATIVE REFERENCES... 3 3. DEFINITIONS... 4 4. REQUIREMENTS... 4 4.1. SERVICE CONDITIONS...
More informationTECHNICAL SPECIFICATION FOR 11KV COMPOSITE INSULATORS (SILICON RUBBER HOUSED)
TECHNICAL SPECIFICATION FOR 11KV COMPOSITE INSULATORS (SILICON RUBBER HOUSED) Regd. & Corporate Office: Visnagar Road, MEHSANA 384 001 (North Gujarat) Telephone: (02762) 222880, 222080-81 Fax: (02762)
More informationSediver toughened glass insulators for HVAC applications. Experts & Pioneers USA
Sediver toughened glass insulators for HVAC applications Experts & Pioneers USA Sediver, Experts and Pioneers in insulation technology This catalog presents a selection of the Sediver toughened glass insulator
More informationEffect of UV-Rays and Salt Contamination on 33kV Silicon Composite Insulators
IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE) e-issn: 2278-1676,p-ISSN: 2320-3331, Volume 11, Issue 6 Ver. II (Nov. Dec. 2016), PP 45-55 www.iosrjournals.org Effect of UV-Rays and
More informationData Sheet 110kV TP123-II Porcelain Insulator Outdoor Termination
3 Data Sheet 110kV TP123-II Porcelain Insulator Outdoor Termination 1 Product Description 3M 110kV TP123-II termination meets requirements of IEC60840 and GB11017.3 standards. The porcelain insulator is
More informationTECHNICAL SPECIFICATIONS FOR. 11 KV, 45 KN, 320 mm. Creepage Distance, Long rod (B&S) type Composite (Polymer) Insulators
TECHNICAL SPECIFICATIONS FOR 11 KV, 45 KN, 320 mm. Creepage Distance, Long rod (B&S) type Composite (Polymer) Insulators Page 1 of 22 1. SCOPE: Technical Specifications for 11 KV, 45KN, 320 mm. Creepage
More informationPOST AND DISC INSULATOR
POST AND DISC INSULATOR September 2017 Engineering Department WEST BENGAL STATE ELECTRICITY TRANSMISSION COMPANY LIMITED Regd. Office: VidyutBhawan, Block DJ, Sector-II, Bidhannagar, Kolkata 700091. CIN:
More informationPART-II. TECHNICAL SPECIFICATIONS FOR 11 KV, 45KN, 320 Creepage Distance, Long rod (B&S) type Composite (Polymer) Insulator.
PART-II TECHNICAL SPECIFICATIONS FOR 11 KV, 45KN, 320 Creepage Distance, Long rod (B&S) type Composite (Polymer) Insulator. 1. SCOPE: This specification covers design, manufacture, testing, inspection,
More informationTechnical Specification for Outdoor Porcelain Station Post Insulators
Ergon Energy Corporation Limited Technical Specification for Outdoor Porcelain ETS10-01-02 Specification ETS10-01-02 Ver 2 Contents 1. Purpose and Scope... 1 2. References... 1 2.1 Applicable Standards...
More informationPolymer and FRP Technology - An Alternative to Conventional Porcelain for Future Power Sector
Polymer and FRP Technology - An Alternative to Conventional Porcelain for Future Power Sector *Bhavani Sindhoora Velaga **Chakradhar Kaza *** Dokuparthy Narasimha Rao * &** & ***Department of Electrical
More information33-SDMS-02 SPECIFICATIONS FOR
SPECIFICATIONS FOR MV AUTOMATIC LINE SECTIONLIZER UP TO 36 KV This specification is property of SEC and subject to change or modification without any notice TABLE OF CONTENTS SECTION T I T L E PAGE NO.
More informationSECTION N EQUIPMENT FOR SUBSTATION MAINTENANCE
Page 89 SECTION N INDEX DESCRIPTION PAGE - INSULATED MODULAR RITZGLAS SCAFFOLD 90 - MODULAR RITZGLAS SCAFFOLD - MAIN PARTS 91 - TRUCK MOUNTED INSULATED LADDER FOR HOT LINES UP TO 500 kv WITH ROTATION SUPPORT
More information11 KV, 45KN, 320 Creepage Distance, Long rod (B&S) type Composite (Polymer) Insulator
TECHNICAL SPECIFICATIONS FOR 11 KV, 45KN, 320 Creepage Distance, Long rod (B&S) type Composite (Polymer) Insulator Page 1 of 18 1. SCOPE: Technical Specification for 11 KV, 45KN, 320 Creepage Distance,
More informationSuspension clamps. Contents. General Oscillating and trunnion type suspension clamps forged.. 3. Oscillating type suspension clamps cast...
Contents General......................................... 2 Oscillating and trunnion type suspension clamps forged.. 3 Oscillating type suspension clamps cast............... 4 Envelope type suspension
More informationHARYANA VIDYUT PRASARAN NIGAM LIMITED. TECHNICAL SPECIFICAION FOR POLYMER INSULATOR STRINGS FOR 220KV / 132KV/66KV TRANSMISSION LINES
HARYANA VIDYUT PRASARAN NIGAM LIMITED. SPECIFICATION NO: 82 /TRD/CE/MM/JULY/2018 TECHNICAL SPECIFICAION FOR POLYMER INSULATOR STRINGS FOR 220KV / 132KV/66KV TRANSMISSION LINES Chief Engineer/MM, Haryana
More informationBIDDING DOCUMENT FOR. Supply of Galvanized Steel Tubular Poles, 11KV Polymer Insulators and ACSR Conductors under Saubhagya Scheme
BIDDING DOCUMENT FOR Supply of Galvanized Steel Tubular Poles, 11KV Polymer Insulators and ACSR Conductors under Saubhagya Scheme TENDER IDENTIFICATION NOS: No.ACE(MM)Saubhagya/2018-19/01. MAIN CONTENTS
More informationFIBRE REINFORCED PLASTICS IN HIGH VOLTAGE APPLICATIONS
FBRE RENFORCED PLASTCS N HGH VOLTAGE APPLCATONS Volker Bergmann, Reinhausen Power Composites GmbH Page 1 OVERVEW 1. ntroduction 2. Hollow core composite insulators and their application 3. Dielectric and
More informationDevelopment of Composite Line Spacers for Distribution Lines
Development of Composite Line Spacers for Distribution Lines Ichiro Sumitani / Toshiko Kurosawa TOKYO ELECTRIC POWER COMPANY 4-1 Egasaki-Cho, Tsurumi-Ku, Yokohama, 230-8510JAPAN Tel : +81 45 585 8561 Fax
More information11KV PORCELAIN INSULATORS AND FITTINGS
REC Specification 3/1971 (Revised 1993) 11KV PORCELAIN INSULATORS AND FITTINGS FOREWORD This specification was originally issued in 1971 on the basis of the decisions taken in the First and Second Standardisation
More informationCHAPTER 6 HIGH VOLTAGE ELECTRICAL TESTING RESULTS
CHAPTER 6 HIGH VOLTAGE ELECTRICAL TESTING RESULTS 6.1 Introduction An electrical porcelain insulator plays an eminent role in electrical power system. As the insulators have high resistance path so it
More informationApplication Note FS Series PV Module Mounting
Application Note FS Series PV Module Mounting The information contained in this application note is intended to provide designers of First Solar PV module mounting and support systems with both minimum
More informationMGVCL/MM/1043/13-14/11 KV Disc Insulators (Porcelain)
SPECIFICATION FOR 11KV DISC. INSULATORS: - 1. SCOPE: - This specification covers 11KV Disc Type Insulators for 11KV H.T. over head power lines. 2. APPLICABLE STANDARDS: - Except when they conflict with
More informationInsulating Covers. Insulators: EPBI: Light Weight Polymeric Post Insulator. EPBI: Light Weight Polymeric Stand Off Insulator
Exit Catalogue Return to Contents Energy Division http://energy.tycoelectronics.com Section 6: Insulators & Insulating Covers. Insulators: EPBI: Light Weight Polymeric Post Insulator EPBI: Light Weight
More informationTECHNICAL SPECIFICATION FOR 11 POST INSULATORS, 11 KV & 33 KV PIN INSULATORS AND 11 KV, B&S TYPE 45 KN & 70 KN DISC INSULATORS.
Vidyut Bhavan( 4th Floor),Bidhannagar, Block-DJ Sector-II Kolkata-700 091 Phone No.033-2359-8397 Fax No.033-2359-1921 TECHNICAL SPECIFICATION FOR 11 POST INSULATORS, 11 KV & 33 KV PIN INSULATORS AND 11
More informationDesign of MO Surge Arresters with Polymeric Housings
Design of MO Surge Arresters with Polymeric Housings Kai Steinfeld (Director R&D Surge Arresters) High Voltage Surge Arrester s Voltages in Electric Power Systems Voltage Limiting Effect of Surge Arresters
More informationTechnical Specifications for 11 KV, 45KN, 320 mm. Creepage Distance, Long rod, (B&S) type Composite (Polymer) Insulator
Technical Specifications for 11 KV, 45KN, 320 mm. Creepage Distance, Long rod, (B&S) type Composite (Polymer) Insulator 1. SCOPE: This specification covers design, manufacture, testing, inspection, packing
More informationTECHNICAL SPECIFICATION SECTION- SWITCHYARD ERECTION REVISION -08
TECHNICAL SPECIFICATION SECTION- REVISION -08 SECTION-(SE) CONTENTS Clause No Particulars Page No. 1.0 General 1 2.0 AAC/ACSR Conductor 13 3.0 Galvanised Steel Earth Wire 16 4.0 Tubular Bus Conductors
More informationComposite Solutions for the Automotive Industry
Composite Solutions for the Automotive Industry 2 COMPOSITE SOLUTIONS FOR THE AUTOMOTIVE INDUSTRY Reduce weight. Reduce costs. Increase quality. Henkel offers composite solutions for the automotive industry.
More informationSpecification No. CSC- XXIX/DH/UH/P&D/
UTTAR & DAKSHIN HARYANA BIJLI VITRAN NIGAM Specification No. CSC- XXIX/DH/UH/P&D/2009-2010 TECHNICALSPECIFICATION FOR PORCELAIN INSULATROS AND INSULATORS FITTINGS FOR 11 KV OVERHEAD POWER LINES Issue of
More informationSTATE OF NEW JERSEY DEPARTMENT OF TRANSPORTATION TRENTON, NEW JERSEY SPECIFICATIONS FOR HIGH PRESSURE SODIUM LUMINAIRES, CUTOFF TYPE
STATE OF NEW JERSEY DEPARTMENT OF TRANSPORTATION TRENTON, NEW JERSEY 08625 SPECIFICATIONS FOR HIGH PRESSURE SODIUM LUMINAIRES, CUTOFF TYPE N.J. Specification No. Effective Date: July 1, 2001 New Jersey
More informationHeavy Wall Heat Shrinkable Tubing 5-7. Flame Retardant Heavy Wall Heat Shrinkable Tubing 8. Heat Shrinkable Ends Caps 9
Heavy Wall Heat Shrinkable Tubing 5-7 Flame Retardant Heavy Wall Heat Shrinkable Tubing 8 Heat Shrinkable Ends Caps 9 Heat Shrinkable Breakout Boots 10 Shrink Ratio 3:1 Shrink-Kon Heavy Wall Heat Shrinkable
More informationand FIBERGLASS FOAM AND HOLLOW CORE BUILDING PANELS
and FIBERGLASS FOAM AND HOLLOW CORE BUILDING PANELS DURASHIELD Fiberglass Foam Core Building Panels Features The DURASHIELD panel is a tongue-and-groove fiberglass pultruded panel comprised of a pultruded
More informationSPECIFICATION FOR HT PIN (11KV & 22KV) AND 11KV DISC. INSULATORS:
SPECIFICATION FOR HT PIN (11KV & 22KV) AND 11KV DISC. INSULATORS: - [THIS TENDER IS FOR PURCHASE OF HT (11KV) PIN INSULATORS ONLY] 1. SCOPE: - This specification covers 11KV Disc Type & 11KV / 22KV Pin
More information1. Filled-in Supply Record Form.
Drawings and Documents to be Furnished: Insulator for 115 & 230 kv Single & Twin bundled conductor and 230 kv Four-bundled conductor 1. Filled-in Supply Record Form. 2. Name of manufacturers and countries
More informationINSULATOR REQUERIMENTS:
2017 INMR WORLD CONGRESS SITGES-BARCELONA, INSULATOR REQUERIMENTS: DESIGN CRITERIA, OPERATION PARAMETERS AND STANDARDS REVIEW JAVIER GARCÍA TECHNICAL AND PRODUCTION MANAGER CONTENTS q INTRODUCTION q MECHANICAL
More informationENGINEERING SPECIFICATION EE SPEC
/. Company Directive ENGINEERING SPECIFICATION EE SPEC : 84/1 Relating to Surge Arresters EE SPEC : 84/1 20 December 2013-1 of 7 - IMPLEMENTATION PLAN Introduction This document defines the surge arresters
More informationSAFETY LINE TEMPORARY PROTECTIVE GROUNDING EQUIPMENT
SAFETY LINE TEMPORARY PROTECTIVE GROUNDING EQUIPMENT SAFETY LINE TEMPORARY PROTECTIVE GROUNDING EQUIPMENT NOTE: When Salisbury ordeing by Honeywell s assemblies Safety of grounding Line grounding products,
More informationTM Series Induced Draft Cooling Tower Specifications
Delta Cooling Towers, Inc. 41 Pine Street P.O. Box 315 Rockaway, New Jersey 07866-0315 Telephone 973.586.2201 Fax 973.586.2243 www.deltacooling.com sales@deltacooling.com TM Series Induced Draft Cooling
More informationISO Rules Part 500, Facilities Division 502, Technical Requirements Section Bulk Transmission Technical Requirements
Part 500, Facilities Division 502, Technical Requirements Section 502.2 Bulk Transmission Technical Requirements Applicability 1 This section 502.2 applies to: Requirements the legal owner of any bulk
More informationOutdoor High Voltage Non-Ceramic Insulators
Outdoor High Voltage Non-Ceramic Insulators V.P. Karthika 1, P. Anitha 2, A. Hearty Rugesh 3 1 Teaching Fellow, 2 Assistant Professor, 3 UG Student 1, 2, 3 Department of EEE, Anna University, Thoothukudi
More informationTechnical Specification for 11 KV, 5KN, 340 Creepage Distance Pin type Composite (Polymer) Insulator with rod
Technical Specification for 11 KV, 5KN, 340 Creepage Distance Pin type Composite (Polymer) Insulator with rod 1. SCOPE: This specification covers design, manufacture, testing, inspection, packing and supply
More informationNEW! PUPI Fiberglass Transmission & H-frame Products
NEW! PUPI Fiberglass Transmission & H-frame Products REV06-2013 PUPI Transmission and H-frame Products Everything that makes PUPI the leader in fiberglass distribution crossarms makes us the best choice
More informationECONOMIC ANALYSIS OF 400 KV TRANSMISSION TOWERS WITH CROSS ARMS INSULATORS
ECONOMIC ANALYSIS OF 400 KV TRANSMISSION TOWERS WITH CROSS ARMS INSULATORS Kumissay Saudeger Yildiz Technical University TURKEY Altug Bozkurt Yildiz Technical University TURKEY ABSTRACT For economic and
More informationSPECIFICATION FOR DISC INSULATORS (Standard Type)
Doc. KPLC1/3CB/TSP/04/015 1 Page 1 of 6 TABLE OF CONTENTS 0.1 Circulation List 0.2 Amendment Record FOREWORD 1. SCOPE 2. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6. MARKING,
More informationElectroStop. Monolithic Isolation Joints INNOVATIVE ENGINEERING FOR CORROSION PROTECTION
ElectroStop Monolithic Isolation Joints INNOVATIVE ENGINEERING FOR CORROSION PROTECTION THE INDUSTRY S BEST DUAL O-RING SEAL The ElectroStop monolithic isolation fittings manufactured by GPT will serve
More informationSURGE ARRESTERS kv in silicone shield
SURGE ARRESTERS 10-24 kv in e shield The surge arresters 12 kv produced in Electotechnical Institute Division in Wroclaw (nominal discharge capability 10kA, 8/20µs) are presented on the picture. Advantages
More informationDesign features - Polymer-housed arresters, PEXLIM
features - Polymer-housed arresters, PEXLIM PEXLIM arresters, using the same ZnO blocks as the EXLIM arresters, match their electrical performance. Silicone as outer insulation material has been used for
More informationfire Charcoat Charcoat IC Passive Protection
Charcoat fire Protection Passive insulator protection Coating for the protection of pollution flashover on exterior and interior high voltage insulators Charcoat IC General information CharCoat IC is a
More informationSUPERIOR CAL-SHIELDS Features & Benefits FAST
SUPERIOR CAL-SHIELDS Features & Benefits FAST One-piece hinged construction Insulation, vapor barrier and G-90 galvanized steel shield in one unit. Butt-and-go Insulation extends beyond the steel shield
More informationIBC Compliant Seismic Rated Isolators
ISOLATORS IBC Compliant Seismic Rated Isolators Features & Benefits Rugged steel housing is designed to handle high wind and seismic forces. Housing serves as blocking during equipment erection. Top plate
More informationTECHNICAL SPECIFICATION FOR 11 KV & 33 KV POST INSULATORS, 11 KV & 33 KV PIN INSULATORS AND 11 KV, B&S TYPE 45 KN & 70 KN DISC INSULATORS.
Vidyut Bhavan( 4th Floor),Bidhannagar, Block-DJ Sector-II, Kolkata-700 091 TECHNICAL SPECIFICATION FOR 11 KV & 33 KV POST INSULATORS, 11 KV & 33 KV PIN INSULATORS AND 11 KV, B&S TYPE 45 KN & 70 KN DISC
More informationTECHNICAL SPECIFICATION OF ELECTRICAL MATERIALS. Polymer Insulators
TECHNICAL SPECIFICATION OF ELECTRICAL MATERIALS Polymer Insulators Tender Notice No. NESCO Utility / Polymer Insulator / 18 /18-19/ 14316, dtd.15.11.18 TECHNICAL SPECIFICATION FOR POLYMER PIN INSULATOR
More informationArtificial Accelerated Ageing Test of Silicone Rubber Housing Material for Lightning Arrester
Artificial Accelerated Ageing Test of Silicone Rubber Housing Material for Lightning Arrester W. Payakcho, J. Grasaesom, S. Thong-om and B. Marungsri* Abstract This paper presents the experimental results
More informationSPECIFICATION FOR HT PIN (11KV & 22KV) AND 11KV DISC. INSULATORS: -
SPECIFICATION FOR HT PIN (11KV & 22KV) AND 11KV DISC. INSULATORS: - 1. SCOPE: - This specification covers 11KV Disc Type & 11KV/ 22KV Pin Type Insulators for 11/22KV H.T. over head power lines. 2. APPLICABLE
More information