5 / 8" AFL NO. ULTIMATE STRENGTH (LBS.) APPROX. WEIGHT EACH (LBS.) APPLICATION SCE , HIBUS Double Suspension R1"

1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.

BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2

ROAD CLOSURE GATE PLAN ESTIMATED QUANTITIES CONCRETE FOOTINGS FOR S. D. DEPT. OF TRANSPORTATION DECEMBER 1996 ELEVATION CABLE TIE DOWN FOOTING

ADMIN. S 1 1 13 199 POST Anchor Bolts (4 Required) 1 Pole Base Plate Footing PLAN POST Chamfer on Footing ESTIMATED QUANTITIES ITEM UNIT QUANTITY Footing & Eyebolt Class M5 Concrete CU.YD. 0.5 The quantity

Thermal Diffusion Galvanizing

Engineering Test Report M-571 Thermal Diffusion Galvanizing For Pole Line Hardware Revision D 11.17.2017 Added further Corrosion Test results and Abrasion Test results Prepared by 1. Introduction to Thermal

DOORS/HATCHES DOORS/HATCHES LET US KNOW YOUR REQUIREMENTS WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS PHONE FAX

DOORS/HATCHES WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS LET US KNOW YOUR REQUIREMENTS 7 #00 -DOG FUMELIGHT DOOR #0 4-DOG WEATHERTIGHT DOOR #0 6-DOG WATERTIGHT DOOR #0 6-DOG SQUARE CORNER DOOR #04 6-DOG

Technical Specification for Steel Forged Fittings

Ergon Energy Corporation Limited Technical Specification for Steel Forged Fittings ETS 01-01-01 ETS 01-01-01 Ver 2 Contents 1. Purpose and Scope... 1 2. References... 1 2.1 Applicable Standards... 1 3.

INDUSTRIAL THREADED PRODUCTS, INC.

INDUSTRIAL THREADED PRODUCTS, INC. (800) 976-Bolt PRODUCTS & SERVICES CORPORATE HEADQUARTERS 3580 Firestone Blvd., Santa Fe Springs, CA 90670 (562) 802-4626 (74) 52-5902 Fax: (562) 802-464 BRANCH SALES

Forged Eye Bolts. Working Load Limit (lbs.)* Weight Per 100 (lbs.)

Forged Eye Bolts G-291 Para Español: www.thecrosbygroup.com SEE APPLICATION AND WARNING INFORMATION On Page 180-181 Forged Steel - Quenched and Tempered. Fatigue rated at 1-1/2 times the Load at 20,000

String hardware. Twin ball pins Ball clevises Socket eyes and socket clevises Security split pins Double eyes...

Contents General......................................... 2 Twin ball pins..................................... 3 Ball eyes......................................... 4 Ball eyes accordin to DIN........

.1 ANSI/ASME B31.1, Power Piping, (SI Edition)..2 American Society for Testing and Materials (ASTM)

Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 03300 - Cast-in-Place Concrete.2 Section 05121 - Structural Steel for Buildings.3 Section 05500 - Metal Fabrications 1.2 REFERENCES.1

Notes Changed note Date. 1 (A) Changed template 09 / 07 / 2008

Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4

05510: TAPERED STEEL TROLLEY POLES AND ACCESSORIES

PART 1 GENERAL 1.01 DESCRIPTION A. The Vendor shall fabricate, furnish, test and deliver tapered steel trolley poles, including base plates, reinforced hand holes, anchor bolts, nuts and washers, and accessories

City of Winnipeg BASES, HANGERS AND SUPPORTS Section NEWPCC - Pump Well Isolation Page 1 of 6 Tender No June 2003

NEWPCC - Pump Well Isolation Page 1 of 6 PART 1 General 1.1 RELATED SECTIONS.1 Section 01001 General Requirements..2 Section 03300 - Cast-in-Place Concrete..3 Section 05121 - Structural Steel for Buildings..4

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT

SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The General Conditions, Special Conditions and Division 1 through Division 22 as set forth in

Midwest Roadside Safety Facility

Bridge Pit 1504 1/2" 38214 244" 6198 1" 25 16 15 14 13 12 11 10 9 8 7 25 6 5 51 3/16" 1300 4 3 2 1 Impact 2270P 2455 5/16" 62365 1379 1/2" 35039 - Barrier nos. 5-13 Anchored Ground Line Note: (1) Test

INSULATORS NEW. See page J-4 for more information.

INSULATORS INSULATORS NEW Improved 23613 Dead End/Suspension Insulator Salisbury s Improved 23613 Dead End/Suspension Insulator has aluminum end fittings. These new end fittings create a lightweight product

OVERSHOT GATE TECHNICAL DATA SHEET

FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully

Atlas Column Forms COLUMN FORM SYSTEMS MULTI-CHANNEL AL-SPEED

COLUMN FORM SYSTEMS Atlas Column Forms AL-SPEED MULTI-CHANNEL Atlas offers AL-SPEED aluminum and Atlas Multi-Channel high strength, adjustable steel column form systems. Both systems offer the advantages

SECTION DETENTION WINDOW SCREENS. 1. Detention screens for interior and exterior installations at exterior windows in existing buildings.

SECTION 08 56 66 DETENTION WINDOW SCREENS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: SPEC

Unit Price Labor. INSTALL 138KV DISCONNECT SWITCH WITH MOTOR OPERATOR AND AUXILIARY SWITCHES ON EXISTING STRUCTURE 1 ea.

SUBSTATION B UPGRADE CONSTRUCTION MAJOR MATERIAL NOTES: Contractor to fill in line item column "Est. Qty." for items left blank. Construction Unit No. Description Est. Qty. Unit Labor 100 INSTALL 138KV

SECTION HANGERS AND SUPPORTS FOR PLUMBING

SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

Product Catalogue Telecommunication Hardware

Product Catalogue Telecommunication Hardware Content Above-Surface Hardware Guy Clamp, Suspension Clamp and Suspension Pulley 4-5 Utility Pole Top Cover 6 Screw Anchor and Turnbuckle 7 Wall Hook, Guy Hook,

1470 Dale Court Austell, GA Phone: Fax:

1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4

80M 4-Square. An antenna project to obtain a bigger signal on the 80 Meter (3.5 to 3.8 MHz) amateur radio band. Bruce Whitney W8RA

An antenna project to obtain a bigger signal on the 80 Meter (3.5 to 3.8 MHz) amateur radio band Bruce Whitney W8RA The Goal: Convert a vacant back field into 4.2 db of power (directional) gain Switchable

ELECTRICAL CONTRACTORS THE UNIVERSITY OF TENNESSEE KNOXVILLE, TENNESSEE SECTION PAGE 1 SECTION SUPPORTING DEVICES

KNOXVILLE, TENNESSEE SECTION 26 05 29 PAGE 1 PART 1 - GENERAL: 1.01 DESCRIPTION OF WORK: SECTION 26 05 29 A. Extent of supports, anchors, sleeves and seals is indicated by drawings and schedules and/or

NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS

PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment

Fig. 1 - Standard Clevis Hanger

Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension

B. ASTM A 153/A 153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware; 1998.

NOTE: For Specification of Pos-I-Tie brick veneer system see it's own Pos-I-Tie Specification page. For Systems with Dovetail Slots as backup see Dovetail Specificaitons page. For Systems with Channel

Sign No. 5 Digital Message Board

Sheet Number Sheet List Sheet Name 01 title and drawing list 02 typography, colours and pictograms 03 sign design - overview 04 sign design - graphic design details 05 sign construction - general information

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR LOW-TENSION CABLE BARRIER. OPR:CT 1 of 5 APPR:JAR:DBP: FHWA:APPR:

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR LOW-TENSION CABLE BARRIER OPR:CT 1 of 5 APPR:JAR:DBP:09-07-11 FHWA:APPR:09-07-11 a. Description. This work consists of furnishing and installing

B B B B3104 CT B3104CT CT B3104CT B3100C AS B422 Right Angle Clamp

EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 24 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 14 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100

Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.

Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon

CHAIN SLING HARDWARE. Eye Cradle Grab Hook Code G

CHAIN SLING HARDWARE Eye Cradle Grab Hook Code G For use with both G80 & G00 chain. Unique cradle grab design. Quenched and tempered alloy steel. 00% proof-tested. Fatigue rated. Design factor 4:. B Grade

The advantages of resistance welding versus Mig welding are: Weld consistency Weld strength Floor cleanliness.

self-supported tri Flooring Systems Self-Supported TriDEK floors have a truss system that eliminates the need for floor frames or other support methods. TriDEK self-supported floors can be used to span

Super Strong Carbon Anchor Shackles... 6 Super Strong Carbon Chain Shackles...7 Alloy Anchor Shackles...8 Alloy Chain Shackles...9

Super Strong Carbon Anchor........... 6 Super Strong Carbon Chain.............7 Alloy Anchor.........................8 Alloy Chain..........................9 Industrial/Government ated Anchor....10 Industrial/Government

Lifting Sockets. Flat Lifting Sockets

Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer

CONSTRUCTION SPECIFICATION FOR GUIDE RAIL ENERGY ABSORBING TERMINALS

ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 554 NOVEMBER 1989 CONSTRUCTION SPECIFICATION FOR GUIDE RAIL ENERGY ABSORBING TERMINALS 554.01 SCOPE 554.02 REFERENCES 554.05 MATERIALS 554.05.01 Concrete.02

Hoist hooks incorporate markings forges into the product which address two (2) QUIC- CHECK features. Shank Hooks Stock No Bronze S-319- BN

S-319 / S-319N Hoist hooks incorporate markings forges into the product which address two (2) QUIC- CHECK features. Patented trademark indicates QUIC-CHECK product. Hook I.D. Codes: A - Alloy Steel, B

Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.

Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used

East Central College HANSEN HALL LEVEL 300/400 RENOVATIONS CONSTRUCTION PACKAGE

SECTION 220529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

SECTION 230529 - HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of Contract, including General Conditions and other Division 1 Specification Sections,

EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 24 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 12 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100

Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.

Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used

Tel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates

Tel : +971 4 8858907, Fax : +971 4 8854316 PO Box No 88490, Dubai Investment Park 1 Dubai - United Arab Emirates E-mail : sales@metallicboltscom, Web : wwwmetallicboltscom About Metallic Bolts Metallic

Area 1 see S2.0. New top of catwalk " Existing top of catwalk "±

General Notes: 1. Design Specifications: International Building Code (2015 Edition). Design Loads: Catwalks for maintenance access: 40PSF Dead load: Actural 2. The construction falsework/shoring/design

Shackles. Applications. Range. Design. CAD drawings. Finish

Applications Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications.

Pipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More

Pipe Valves Fittings Fasteners Tube and Tube Fittings And Much More Tubing Sizes Materials 1/16" to 6" Diameter Stainless A269 & A511 Copper Monel Inconel Hastelloy DK Lok Tube Fittings Sizes Products

GUY-GRIP Dead-end NOMENCLATURE GENERAL INFORMATION SAFETY CONSIDERATIONS

GUY-GRIP Dead-end NOMENCLATURE Please visit our web site at www.preformed.com for additional literature.guy-grip Dead-end Application Procedure - SP2045 Cross-over Marks: (A) Indicate starting point for

DIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.

PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,

NEW Items. Wire Rope and Accessories. Eye Nuts, Bolts and Turnbuckles. Roller Chain. kent-automotive.com NI1

In the digital version, you can navigate to each section by clicking on the page numbers. You can return to the Table of Contents by clicking in the header. Wire Rope and Accessories Wire Rope Commercial

MECHANICAL LEVEL CONTROLS

FLANGED TRUNNION ASSEMBLY DUCTILE IRON APPLICATIONS: Used on oil and gas separators, freewater knockouts (FWKO), horizontal emulsion treaters and similar equipment where a float is desired to monitor fluid

GUY-GRIP Dead-end NOMENCLATURE GENERAL INFORMATION SAFETY CONSIDERATIONS

GUY-GRIP Dead-end NOMENCLATURE Tower Products, Dead-end and Dead-end Accessories: Section 1 Please visit our web site at www.preformed.com for additional literature.guy-grip Dead-end Application Procedure

B. All materials shall be listed by an OSHA approved Nationally Recognized Testing Laboratory (NRTL).

16936 STAGE LIGHTING RIGGING (COUNTERWEIGHT) *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number: 11

Product Guide Specification

HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier

Transmission Line General Requirements Including Typical Overhead Line Structures. Document Number: 1-03-FR-09

Transmission Line General Requirements Including Typical Overhead Line Structures Document Number: 1-03-FR-09 VERSION 1.0 June 2018 This functional requirements document is in line with the organisation's

. SECTION HANGERS AND SUPPORTS

. SECTION 230529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division I Specification

CHAIN LINK FENCES AND GATES

SECTION 02831 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.01 SUMMARY A. Alternate Material for Fence Post and Framing Material: Where schedule 40 galvanized steel is specified, the following will be accepted:

Manufacturing Capabilities. Very few companies in the industry are able to provide the same extent of services under one roof

Manufacturing Capabilities Our extensive range of manufacturing processes gives us the ability to supply to many different industry sectors. By utilising our design department and the extensive knowledge

CHAIN LINK FENCES AND GATES

SECTION 02831 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.01 REFERENCES AND CODES A. Florida Department of Education, Office of Educational Facilities - State Requirements for Educational Facilities -

SECTION CHAIN LINK FENCES AND GATES

SECTION 02831 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.01 REFERENCES AND CODES A. Florida Department of Education, Office of Educational Facilities - State Requirements for Educational Facilities -

EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 14 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 12 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100

BSR E XX DRAFT Rig/ r3. BSR E1.4-2, Entertainment Technology Statically Suspended Rigging Systems.

BSR E1.4-2, Entertainment Technology Statically Suspended Rigging Systems Table of Contents 1 GENERAL... 2 1.1 Scope... 2 1.2 Purpose... 2 1.3 Application... 2 1.4 Alternative materials, design and methods

Daytona Beach Pier Building Renovation Jun 2010

SECTION 15060 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.

Suspension clamps. Contents. General Oscillating and trunnion type suspension clamps forged.. 3. Oscillating type suspension clamps cast...

Contents General......................................... 2 Oscillating and trunnion type suspension clamps forged.. 3 Oscillating type suspension clamps cast............... 4 Envelope type suspension

The Market Leader: Yesterday Today and Tomorrow Shackles THE COMPETITION

G-209 DESIGN The theoretical reserve capability of carbon shackles should be as a minimum 5 to 1, and alloy shackles a minimum of 5 to 1*. K nown as the DESIG N FACTO R, it is usually computed by dividing

SECTION MISCELLANEOUS METALS

PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications

Item 442 Metal for Structures

Item 442 Metal for Structures 1. DESCRIPTION 2. MATERIALS Provide structural steel, high-strength bolts, forgings, steel castings, iron castings, wrought iron, steel pipe and tubing, aluminum castings

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT

SECTION 220529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

SUPPORT AND ANCHORS SECTION 15090

SUPPORT AND ANCHORS SECTION 15090 PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. Work included in this Section: Materials, equipment, fabrication, installation and tests in conformity with applicable codes

Metal Framing Engineering Data & Specifications

Design Data Metal Framing Channel Elements of Sections Nominal Thickness (inches) 12 GA =.105 I Moment of inertia 14 GA =.075 S Section of Modulas 16 GA =.060 r Radius of Gyration Z Nominal Axis A Area

SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

American Metal Specialties, Inc.

American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best

ANDERSON HUBBELL POWER SYSTEMS FARGO

REFERENCE DATA ALUMINUM AND BRONZE CONNECTORS...-1 RECOMMENDED TYPES OF HARDWARE AND INALLATION MOUNTING... - AMPACITY RATINGS, BOLTED PAD CONNECTIONS...-5 CATALOG NUMBER SUFFIXES FOR SPECIAL FEATURES...

Tower Site Inspection Procedures

Engineering, Manufacturing, Construction & Erection Specializing in Radio & TV Communication Towers 6037 S. Industrial Rd. 918-789-9020 Office 918-789-9922 Fax www.belltowercorp.com bob@belltowercorp.com

Foundation Specifications

Installation Instructions Foundation Specifications for 3.6-/3.7-Meter Earth Station Antennas ulletin 37835A Revision L Introduction This document specifies typical foundation characteristics, designs,

SECTION HANGERS AND SUPPORTS PART 1 - GENERAL. A. Drawings and Division 1 Specification Sections, apply to this Section.

1.01 RELATED DOCUMENTS SECTION 15060 HANGERS AND SUPPORTS PART 1 - GENERAL A. Drawings and Division 1 Specification Sections, apply to this Section. 1.02 SUMMARY A. This Section includes hangers and supports

056 : 1997 CEB STANDARD

056 : 1997 CEB STANDARD CONDUCTOR AND INSULATOR HARDWARE FITTINGS FOR MEDIUM VOLTAGE OVERHEAD POWER LINES CEYLON ELECTRICITY BOARD SRI LANKA CEB STANDARD 056:1997 Specification for CONDUCTOR AND INSULATOR

ANVIL PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG

ANVIL PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG Price Sheet PH-5.18 Effective: May 14, 2018 Cancels Price Sheet PH-3.18 of March 5, 2018 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION

Sign & Post Installation. Standard Specifications and Standard Drawings. July 2017 Edition

Standard Specifications Sign & Post Installation Utility Services Department 500 George Street North, Peterborough, Ontario, K9H 3R9 Transportation Division Telephone: 705-742-7771 Fax: 705-876-4621 Sign

CONSTRUCTION SPECIFICATION FOR EXPANDED METAL ANTI-GLARE SCREEN

ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 791 NOVEMBER 2014 CONSTRUCTION SPECIFICATION FOR EXPANDED METAL ANTI-GLARE SCREEN TABLE OF CONTENTS 791.01 SCOPE 791.02 REFERENCES 791.03 DEFINITIONS

A. American Society for Testing and Materials (ASTM):

SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 03420 - Precast, Prestress Concrete Sections. 3. 04420 - Concrete Unit Masonry. 4.

PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG

PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG Price Sheet PH-9.16C Effective: September 5, 2016 Cancels Price Sheet PH-11.15C of November 30, 2015 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

SECTION 23 0529 - MECHANICAL SUPPORTING DEVICES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

SPECIFICATION SS-20 / 4 STEEL STRUCTURES FOR SUBSTATION AND SWITCHING STATION MATERIAL

1 JULY 2009 SPECIFICATION SS-20 / 4 STEEL STRUCTURES FOR SUBSTATION AND SWITCHING STATION MATERIAL I. SCOPE This Specification covers the technical characteristics, the manufacturing and testing of steel

PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG

PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG Price Sheet PH-12.17C Effective: December 4, 2017 Cancels Price Sheet PH-9.16C of September 5, 2016 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT

SECTION 22 0529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

Carbon steel or Stainless steel

MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure

Compression Superstructure TELETOM 500/700 Series Equipment Management Booms TELETOM 400/600 Series Anesthesia Booms

Contractor s Summary for Compression Superstructure TELETOM 500/700 Series Equipment Management Booms TELETOM 400/600 Series Anesthesia Booms Document # 70-000-00195 rev 01! WARNING This summary dimensional

Certificate of Compliance

Certificate of Compliance This certificate is issued for the following: Seismic Sway Brace Components For Automatic Sprinkler Systems Piping Attached Products Model Part Description Orientation Run Pipe

Foundation Specifications for 3.6-/3.7-Meter Earth Station Antennas

Installation Instructions Foundation Specifications for 3.6-/3.7-Meter Earth Station Antennas Bulletin 37835A Revision E Introduction This document specifies typical foundation characteristics, designs,

UNIFORM STANDARD DRAWINGS CLARK COUNTY AREA, NEVADA YEAR 2015 REVISIONS

, NEVADA YEAR 2015 REVISIONS SECTION TITLE AND REVISIONS SUMMARY EFFECTIVE DATE 217.S2 "Residential Curb and Gutter, R-Type" - New drawing to accommodate ADA requirements. 223 "Residential Driveway" -

DISTRIBUTION SILICONE INSULATORS Deadend / Suspension 15 kv to 69 kv

K-LINE INSULATORS LIMITED TORONTO, ONTARIO, CANADA Catalogue D-DS DISTRIBUTION SILICONE INSULATORS Deadend / Suspension 15 kv to 69 kv ISO9001 SAI GLOBAL FILE No. 000117 Distribution Silicone Insulators

Draft. Not yet Approved

2016 Part 3.2.5 Recommended Design Criteria and Functional/Operating Guidelines for Overhead Bridge and Cantilever Structures and Placement of Grade Crossing Warning Devices Revised 2017 (8 Pages) A. Purpose

E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB

Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2

SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS

SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and

Section 906. STRUCTURAL STEEL

906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes

600 GROUNDING 9/12/2018

00 GOUNDING //0 C N C N,N C N,N N TN0 C TN C TN C TN Installation of Grounding Assemblies Basic Units - Grounding Basic Units - Copperweld Grounding - Pole Ground epair Static Wire History/Policy Static

Chapter 73. Articles of iron or steel

Chapter 73 Articles of iron or steel Notes. 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and

08/09 Series 5 x 8 Solid PLUS

3(6) 3.000 3.563(2) 3(3) 3(3) 08/09 Series 5 x 8 Solid PLUS included at no extra charge B1 1.969(4) 1(4) 1.219(4) Core Plan View Cavity Plan View Pry Slots.510 I.D..510 ½x2½ Snap Ring.375 Return Pin 3.870

ITEM 555 CHAIN LINK FENCING

ITEM 555 AFTER MARCH 1, 2012 CHAIN LINK FENCING 555.1 Description. This item shall govern for furnishing the quantities of chain link fencing and gates as shown on the plans, including all posts, bracing