EPCON C8. Chemical Anchoring - Reinforcing Bar Anchorage 16.1 CHEMICAL INJECTION ANCHORING
|
|
- Aldous McGee
- 6 years ago
- Views:
Transcription
1 16.1 CHEMICAL INJECTION ANCHORING 16.1 GENERAL INFORMATION Product is a High Performance Pure Epoxy Anchoring adhesive for use in Cracked and Non-Cracked concrete. For structures subject to external exposure, permanently damp or aggressive conditions. Benefits, Advantages and Features European Technical Approval option1 for use in cracked and non cracked concrete ETA-10/0309: Highest level of European approval for chemical anchors 100 Year design life Approved for flooded holes Approved for floor, wall & overhead applications Data for Sustained Loading Greater productivity: Anchors in dry, damp, wet or flooded holes No weather delays Fast,easy dispensing with high flow (pneumatic) mixer Greater security: Highest performance in cracked concrete Versatile Anchors all stud & bar diameters in all directions Oversized holes Anchors in carbide drilled and diamond cored holes For tropical and Cold weather conditions Greater safety: Low odour Non-flammable Fire Rated : Refer Fire rated anchoring section Installation PERFORMANCE RELATED Drill recommended diameter and depth hole. 2. Important: Use Ramset Dustless Drilling System to ensure holes are clean. Alternatively, clean dust and debris from hole with stiff wire or nylon brush and blower in the following sequence: blow x 4, brush x 3, blow x 4, brush x 3, blow x Insert mixing nozzle to bottom of hole. Fill hole to 3/4 the hole depth slowly, ensuring no air pockets form. 4. Insert rebar to bottom of hole while turning. 5. Allow Ramset to cure as per setting times. INSTALLATION RELATED Principal Applications Anchoring into cracked & non cracked concrete e Road barrier hold down bolts Bridge refurbishment Road & Rail tunnel construction Reinforcing bar from 8 to 32mmm Starter Bars Threaded studs from M8 to M30 Threaded Stud material : Zn,A4 316, HCR steels Threaded Stud material : 5.8, 8.8, 10.9 grade Installation temperature limits: Substrate: 5 C to 40 C Adhesive: 5 C to 40 C Load should not be applied to anchor until the chemical has sufficiently cured as specified. Service temperature limits: -40 C to 80 C Setting Times Epcon C8 Temperature of base material Gel Time Curing time in dry concrete Curing time in wet concrete 5 C - 9 C 20 min 30 h 60 h 10 C - 19 C 14 min 23 h 46 h 20 C - 24 C 11 min 16 h 32 h 25 C - 29 C 8 min 12 h 24 h 30 C - 39 C 5 min 8 h 16 h 40 C 5 min 6 h 12 h ETA European Technical Approval ETAG 001 Part 5 Option 1 ETA 10/ CPD-0549 ETA European Technical Approval ETAG 001 Part 5 TR023 ETA 07/ CPD RAMSET
2 CHEMICAL INJECTION ANCHORING Installation and performance details: Epcon C8 and Reinforcing Bar Anchor Size, d b (mm) Drilled Hole diam., d h (mm) Anchor Effective Depth, h (mm) Edge* distance, e c (mm) * Note: For shear loads acting towards an edge or where these optimum dimensions are not achievable, please use the simplified strength limit state design process to verify capacity. **Note: Reduced characteristic ultimate concrete tensile capacity = ØN uc where Ø = 0.56 and N uc = Characteristic ultimate concrete tensile capacity. For conversion to Working Load Limit MULTIPLY ØN uc x 0.6 ***Note: Reduced characteristic ultimate steel tensile capacity = ØN us where Ø = 0.8 and N us = Characteristic ultimate steel tensile capacity. For conversion to Working Load Limit MULTIPLY ØN us x 0.56 #Note: Design Tensile Capacity ØN ur = minimum of ØN uc and ØN us Data based on service temperature limit of -40 C to +40 C WET HOLES: Multiply ØN uc x DESCRIPTION AND PART NUMBERS Description Cartridge Size Part No. Epcon C8 450 ml C8-450 Optimum dimensions* Reduced Characteristic Capacity # Anchor spacing, a c (mm) Concrete substrate thickness, b m (mm) Gr 500 Rebar - Steel Tension, ØN us (kn)*** Shear, ØV us (kn) Concrete Tension, ØN uc (kn)** Concrete compressive strength, f'c 20 MPa 32 MPa 40 MPa Effective depth, h (mm) h 6 * d h (To obtain full steel strength in shear) Substrate thickness, bm (mm) b m = greater of: 1.25 x h, h + (2 x d h ) Drilled hole depth, h 1 (mm) h 1 = h h = Effective depth 16.3 ENGINEERING PROPERTIES Typical Engineering Properties of Grade 500 Reinforcing Bar Rebar Size Drilled Hole Dia, d h (mm) Stress Area, A s (mm 2 ) Yield Stress, f sy (MPa) Tensile Steel Yield Capacity N sy, (KN) For further information refer to reinforcing bar manufacturer's published information and AS/NZS 4671: RAMSET
3 STEP 1 Design tensile action effect, N* (kn) Select anchor to be evaluated Table 1a Indicative combined loading interaction diagram 200 Notes: ~ Shear limited by Grade 500 Rebar steel capacity. 180 ~ Tension limited by concrete capacity using nominal depths. 160 ~ No edge or spacing effects. ~ f' c = 32 MPa / Design shear action effect, V* (kn) Table 1b Absolute minimum edge distance and anchor spacing values, e m and a m (mm) e m, a m Step 1c Calculate anchor effective depth, h (mm) Refer to nominal recommended effective depths, h, listed in installation and performance details table on page 120. Effective depth, h (mm) h 6 * d h (To obtain full steel strength in shear) 1 Anchor size determined, absolute minima compliance achieved, effective depth (h) calculated RAMSET
4 STEP 2 Verify concrete tensile capacity - per anchor Table 2a Reduced characteristic ultimate concrete tensile capacity, ØN uc (kn), Ø c = 0.56, f c = 32 MPa Combined pull-out and concrete cone resistance - ØNucp Drilled hole dia, d h (mm) Effective depth, h (mm) Concrete Cone Resistance - ØNucc Bold values are at ChemSet Anchor Stud nominal depths. Note: Effective depth, h must be 6 x drilled hole diameter, d h for anchor to achieve tabled shear capacities. Wet holes: Multiply ØN uc * 0.5. If Service temperature limit is -40 C to +80 C then ØN uc = ØN ucp If Service temperature limit is -40 C to +40 C then Refer to Checkpoint 2 Table 2b-1 Concrete service temperature limits effect, tension, X ns Service temperature limits effect, tension, X ns where ØN uc = ØN ucp (from Table 2a) Service temperature (ºC) Service temperature limits effect, tension, X ns -40 C to +40 C C to +80 C X ns where ØN uc = ØN ucc (from Table 2a) Table 2b-2 Concrete compressive strength effect, tension, X nc Concrete compressive strength effect, tension, X nc where ØN uc = ØN ucp (from Table 2a) f'c (MPa) Concrete compressive strength effect, tension, X nc X nc where ØN uc = ØN ucc (from Table 2a) RAMSET
5 Table 2c Edge distance effect, tension, X ne Edge Distance, e (mm) Table 2d Anchor spacing effect, end of a row, tension, X nae For single anchor design, X nae = 1.0 Anchor Spacing, a (mm) Table 2e Anchor spacing effect, internal to a row, tension, X nai For single anchor design, X nai = 1.0 Anchor Spacing, a (mm) Design reduced ultimate concrete tensile capacity, ØN urc ØN urc = ØN uc *X ns *X nc *X ne *(X nae or X nai ) If Service temperature limit is -40 C to +40 C then ØN urc = minimum of ØN ucp *X ns *X nc *X ne *( X nae or X nai ) and ØN ucc *X ns *X nc *X ne *( X nae or X nai ) RAMSET
6 STEP 3 3 STEP 4 Verify anchor tensile capacity - per anchor Table 3a Reduced characteristic ultimate steel tensile capacity, ØN us (kn), Ø n = 0.8 Grade 500 Rebar Step 3b Reduced characteristic ultimate bolt steel tensile capacity, ØN tf (kn) Not appropriate for this product. Design reduced ultimate tensile capacity, ØN ur ØN ur = minimum of ØN urc, ØN us Check N* / ØN ur 1, if not satisfied return to step 1 Tensile performance conversion table Performance Required Notation Concrete Tensile Performance Concrete Tension Capacity NOTE: Design Tensile Capacity is the minimum of Concrete Tension and Steel Tension Capacities Verify concrete shear capacity - per anchor Notation Table 4a Reduced characteristic ultimate concrete edge shear capacity, ØV uc (kn), Ø q = 0.6, f c = 32 MPa Edge Distance, e (mm) Note: Effective depth, h must be 6 x drilled hole diameter, d h for anchor to achieve tabled shear capacities. Steel Tensile Performance Carbon Steel Tension Capacity Strength Limit State ØN urc MULTIPLY ØN urc x 1.00 ØN us MULTIPLY ØN us x 1.00 Working Load Limit N ac MULTIPLY ØN urc x 0.60 N as MULTIPLY ØN us x 0.56 Cyclic Loading N yc MULITPLY ØN urc x 0.60 N ys MULITPLY ØN us x 0.56 Fire Resistance N Rk,c,fi,t Refer to pages N Rk,s,fi,t Refer to pages Cracked Concrete/Tension Zone N 0 Rd,p Refer to pages N Rd,s Refer to pages Seismic N 0 Rd,p,sis Refer to pages N Rd,s,sis Refer to pages Table 4b Concrete compressive strength effect, concrete edge shear, X vc f c (MPa) X vc Load direction effect, conc. edge shear, X vd Table 4c Load direction effect, concrete edge shear, X vd Angle, X vd RAMSET
7 Table 4d Anchor spacing effect, concrete edge shear, X va Note: For single anchor designs, X va = 1.0 Edge distance, e (mm) Anchor spacing, a (mm) Table 4e Multiple anchors effect, concrete edge shear, X vn Note: For single anchor designs, X vn = 1.0 Anchor spacing / Edge distance, a / e Number of anchors, n e 1 Concrete edges Shear Force e 2 ANCHOR AT A CORNER Failure wedge 4 Table 4f Anchor at a corner effect, concrete edge shear, X vs Note: For e 1 /e 2 > 1.25, X vs = 1.0 Edge distance, e 2 (mm) Edge dustance, e 1 (mm) Design reduced ultimate concrete edge shear capacity, ØV urc ØV urc = ØV uc * X vc * X vd * X va * X vn * X vs RAMSET
8 STEP 5 5 Verify anchor shear capacity - per anchor Table 5a Reduced characteristic ultimate steel shear capacity, ØV us (kn), Ø v = 0.8 Grade 500 Rebar Step 5b Reduced characteristic ultimate bolt steel shear capacity, ØV sf (kn) Not appropriate for this product. Design reduced ultimate shear capacity, ØV ur ØV ur = minimum of ØV urc, ØV us Check V* / ØV ur 1, if not satisfied return to step 1 Shear performance conversion table Performance Required Concrete Shear Performance Notation Concrete Shear Capacity NOTE: Design Shear Capacity is the minimum of Concrete Shear and Steel Shear Capacities Steel Shear Performance Notation Carbon Steel Shear Capacity Strength Limit State ØV uc MULTIPLY ØV uc x 1.00 ØV us MULTIPLY ØV us x 1.00 Working Load Limit V ac MULTIPLY ØV uc x 0.55 V as MULTIPLY ØV us x 0.45 Cyclic Loading V yc MULITPLY ØV uc x 0.55 V ys MULITPLY ØV us x 0.45 Fire Resistance V Rk,c,fi,t Refer to pages V Rk,s,fi,t Refer to pages Cracked Concrete/Tension Zone V 0 Rd,c Refer to pages V 0 Rd,s Refer to pages Seismic V 0 Rd,c,sis Refer to pages V 0 Rd,s,sis Refer to pages STEP 6 6 Combined loading and specification Check N*/ØN ur + V*/ØV ur 1.2, if not satisfied return to step 1 Specify Reinforcing Bar Anchorage Ramset Epcon C8 with (Anchor Size) grade 500 Rebar. Drilled hole depth to be (h) mm. Example Ramset Epcon C8 with N20 grade 500 Rebar Drilled hole depth to be 160 mm. To be installed in accordance with Ramset Technical Data Sheet RAMSET
EPCON C8. Chemical Anchoring - Anchor Studs 8.1 CHEMICAL INJECTION ANCHORING 8.1 GENERAL INFORMATION
8.1 CHEMICAL INJECTION ANCHORING 8.1 GENERAL INFORMATION Product is a High Performance Pure Epoxy Anchoring adhesive for use in Cracked and Non-Cracked concrete. For structures subject to external exposure,
More informationChemical Anchoring Reinforcing Bar Anchorage
Introduction CHEMICAL ANCHORING - REINFORCING BAR ANCHORING Chemical Anchoring Reinforcing Bar Anchorage The following section applies to reinforcing bar in anchorage applications. For structural post-installed
More informationChemSet Reo 502. Chemical Anchoring - Reinforcing Bar Anchorage 15.1 CHEMICAL INJECTION ANCHORING 15.1 GENERAL INFORMATION.
15.1 CHEMICAL INJECTION ANCHORING 15.1 GENERAL INFORMATION Product is an extra heavy duty pure epoxy anchoring adhesive. Benefits, Advantages and Features Greater productivity: Anchors in dry, damp, wet
More informationChemSet 801. Chemical Anchoring - Reinforcing Bar Anchorage Principal Applications Structural steel Starter bars CHEMICAL INJECTION ANCHORING
18.1 CHEMICAL INJECTION ANCHORING 18.1 GENERAL INFORMATION Product is a heavy duty Vinyl Ester anchoring adhesive. Benefits, Advantages and Features Suitable for structural applications: High bond strength
More informationChemSet 101 PLUS. Chemical Anchoring - Reinforcing Bar Anchorage 20.1 CHEMICAL INJECTION ANCHORING 20.1 GENERAL INFORMATION.
20.1 CHEMICAL INJECTION ANCHORING 20.1 GENERAL INFORMATION Product ChemSet Injection 101 PLUS is a marine grade polyester adhesive anchor. Benefits, Advantages and Features Certified Performance European
More informationEPCON C6 Series. Chemical Anchoring - Reinforcing Bar Anchorage 17.1 CHEMICAL INJECTION ANCHORING 17.1 GENERAL INFORMATION
17.1 CHEMICAL INJECTION ANCHORING 17.1 GENERAL INFORMATION Product Epcon C6 is a versitile pure epoxy anchoring adhesive Benefits, Advantages and Features Features Superior strength in shallow embedment.
More informationChemSet 101 PLUS. Chemical Anchoring - Anchor Studs 12.1 CHEMICAL INJECTION ANCHORING 12.1 GENERAL INFORMATION. Product
12.1 CHEMICAL INJECTION ANCHORING 12.1 GENERAL INFORMATION Product PERFORMANCE RELATED MATERIAL SPECIFICATION INSTALLATION RELATED ChemSet Injection 101 PLUS is a marine grade polyester adhesive. Benefits,
More informationEPCON C6. Chemical Anchoring - Anchor Studs 9.1. Principal Applications CHEMICAL INJECTION ANCHORING 9.1 GENERAL INFORMATION
9.1 CHEMICAL INJECTION ANCHORING 9.1 GENERAL INFORMATION Product Epcon C6 is a versitile pure epoxy anchoring adhesive Benefits, Advantages and Features Features Superior strength in shallow embedment.
More informationEPCON C8. Cracked Concrete - Anchor Studs 43.1 CRACKED CONCRETE - CHEMICAL INJECTION 43.1 GENERAL INFORMATION
43.1 CRACKED CONCRETE - CHEMICAL INJECTION 43.1 GENERAL INFORMATION Product is a High Performance Pure Epoxy ing adhesive for use in Cracked and Non-Cracked concrete. For structures subject to external
More informationCracked Concrete. Introduction. Cracked Concrete CRACKED CONCRETE
Introduction CRACKED CONCRETE Cracked Concrete Cracked Concrete Introduction When selecting a post-installed anchor for a connection detail, there are a number of areas that need to be considered such
More informationRamset Undercut. Mechanical Anchoring Principal Applications ANCHOR SYSTEMS 26.1 GENERAL INFORMATION
26.1 ANCHOR SYSTEMS 26.1 GENERAL INFORMATION PERFORMANCE RELATED MATERIAL INSTALLATION RELATED Product The Ramset undercut anchor system provides Extreme performance anchoring combined with easy installation
More informationChemset Reo 502. Chemical Anchoring - Rebar to AS GENERAL INFORMATION CHEMICAL INJECTION ANCHORING
Chemset Reo 502 23.1-2 CHEMICAL INJECTION ANCHORING AVAILABLE IN AUSTRALIA ONLY 23.1 GENERAL INFORMATION Product ChemSet Reo 502 is a extra heavy duty pure epoxy anchoring adhesive. Benefits, Advantages
More informationSpaTec Plus. Mechanical Anchoring 27.1 SAFETY ANCHORS 27.1 GENERAL INFORMATION
27.1 SAFETY ANCHORS 27.1 GENERAL INFORMATION PERFORMANCE RELATED MATERIAL INSTALLATION RELATED Product A high security, high performance, through fixing, torque controlled expansion anchor which has approval
More informationWERCS AnkaScrew. Mechanical Anchoring Principal Applications SCREW IN ANCHORS 30.1 GENERAL INFORMATION. Product
30.1 SCREW IN ANCHORS 30.1 GENERAL INFORMATION PERFORMANCE RELATED MATERIAL INSTALLATION RELATED MGAL Product The Anchor is a medium duty, rotation setting thread forming anchor. Benefits, Advantages and
More informationSeismic Anchors. Introduction. Seismic Anchors. Seismic Anchors SEISMIC ANCHORS. Introduction
Introduction SEISMIC ANCHORS Seismic s Seismic s Seismic s Introduction This section of the Specifiers Resource Book provides you with solutions for postinstalled anchors where there is a Seismic/Earthquake
More informationCHEMICAL ANCHORING. Specifi ers Anchoring Resource Book Book 3.3 of 3 CHEMICAL ANCHORING
CHEMICAL ANCHORING Specifi ers Anchoring Resource Book Book 3.3 of 3 CHEMICAL ANCHORING Book 3.3 2009 Chemical Anchoring Welcome to the Ramset Anchoring Resource Book These concise and systematically presented
More informationSpaTec Plus. Cracked Concrete - Mechanical Anchoring 46.1 CRACKED CONCRETE - SAFETY ANCHORS 46.1 GENERAL INFORMATION
46.1 CRACKED CONCRETE - SAFETY ANCHORS 46.1 GENERAL INFORMATION Product A high security, high performance, through fixing, torque controlled expansion anchor which has approval for use in cracked and noncracked
More informationTruBolt A4 316 SS. Cracked Concrete - Mechanical Anchoring 47.1 CRACKED CONCRETE - STUD ANCHOR 47.1 GENERAL INFORMATION
47.1 CRACKED CONCRETE - STUD ANCHOR 47.1 GENERAL INFORMATION PERFORMANCE RELATED MATERIAL INSTALLATION RELATED Product A Heavy duty, torque controlled expansion anchor, made of stainless steel for use
More informationMECHANICAL ANCHORING. Specifi ers Anchoring Resource Book Book 2.3 of 3 MECHANICAL ANCHORING
MECHANICAL ANCHORING Specifi ers Anchoring Resource Book Book 2.3 of 3 MECHANICAL ANCHORING Book 2.3 2009 Mechanical Anchoring Welcome to the Ramset Anchoring Resource Book These concise and systematically
More informationCast-In Anchoring. Solutions. Design Manual R E I N F O R C I N G P R E C A S T T I L T - U P
Cast-In Anchoring Solutions Design Manual TM R E I N F O R C I N G P R E C A S T T I L T - U P 2 TM R E I N F O R C I N G P R E C A S T T I L T - U P 3 Reid has been supplying quality engineered products
More informationTrutek TCM380 PRO. Trutek Fasteners Polska Al. Krakowska 55 Sekocin nowy Rasxyn Poland T:
Features and Benefits Version 23/12/2013 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
More informationweber.anc 405 BFX formerly Conrep.405 BFX
1/ weber.anc 5 BFX formerly Conrep.5 BFX PURE EPOXY ANCHORING RESIN IN CARTRIDGE PRODUCT weber.anc 5 BFX is a two-component high strength pure epoxy chemical anchoring resin system. It is especially recoended
More informationPure Epoxy Adhesive For Premium Engineering Applications. Product Advantages. Meets the highest anchoring standards
Date of Issue: March 27, 2015 Pure Epoxy Adhesive For Premium Engineering Applications EPCON C8 is a high performance pure epoxy that meets the highest international anchoring standards such as seismic
More informationHigh Strength Epoxy Tested in Accordance with ICC-ES AC308
ADHESIVE ANCHORING SPECIALISTS High Strength Epoxy Tested in Accordance with ICC-ES AC308 DESCRIPTION/SUGGESTED SPECIFICATIONS* The epoxy resin and hardener are completely mixed as they are dispensed from
More informationC6+ High Strength Epoxy for All. conditions. One product for most environmental conditions and weather conditions. Curing Times
ADHESIVE ANCHORING SPECIALISTS High Strength Epoxy for All Conditions DESCRIPTION/SUGGESTED SPECIFICATIONS* One product for most environmental conditions and weather conditions Design and use with confidence
More informationHigh Strength Epoxy Tested in Accordance with ICC-ES AC308
ADHESIVE ANCHORING SPECIALISTS DESCRIPTION/SUGGESTED SPECIFICATIONS* The 100% epoxy resin and hardener are completely mixed as they are dispensed from the dual cartridge through a static mixing nozzle,
More informationHilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer
with HIT-V Hilti HIT-HY 200 with HIT-V Injection Mortar System Benefits Hilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer HIT-V rods HIT-V (Zinc) HIT-V-F (Gal) HIT-V-R
More informationMaterials Polyester Resin Anchors: Carbon Steel grade 5.8 Stainless Steel: AISI 316
Chemset Injection is a two component polyester resin anchor system in a coaxial cartridge with mixing nozzle. Developed for fixing awkward materials in hollow and solid sections where access may be difficult.
More informationEJOT Chemical Anchoring Systems. High strength anchoring of threaded resin studs into masonry blocks, cracked and non-cracked concrete
EJOT Chemical Anchoring Systems High strength anchoring of threaded resin studs into masonry blocks, cracked and non-cracked concrete The Quality Connection www.ejot.co.uk EJOT Multifix VSF EJOT Multifix
More informationHilti HIT-RE 100 mortar with rebar (as anchor)
Injection mortar system Hilti HIT-RE 100 330 ml, 500 ml and 1400 ml foil pack Statik mixer rebar BSt 500 S Benefits - suitable for non-cracked and cracked concrete C 20/25 to C 50/60 - high loading capacity
More informationAdhesive Anchors SECTION CONTENTS. General Information. Installation Information Design Information Material Information Ordering Information
General Information General Information AC100-PRO Vinylester Injection Adhesive Anchoring System ProDUCT DESCRIPTION The AC100-PRO is a two-component vinylester adhesive anchoring system. The system includes
More informationAC100-PRO. AC100-PRO Vinylester 160ML AC100-PRO Vinylester 300ML AC100-PRO Vinylester 360ML AC100-PRO Vinylester 410ML AC100-PRO 160ML AC100-PRO 300ML
Vinylester 160ML Vinylester 300ML Vinylester 360ML Vinylester 410ML 160ML 300ML 360ML 410ML Approvals and test reports POWERS TEST LABORATORY 0756-CPD-0236 EUROPEAN TECHNICAL APPROVAL ETA-08/0290 - ETAG
More informationHilti HIT-HY 170 mortar with HIT-V rod. Anchor Fastening Technology Manual. Hilti HIT-HY 170 with HIT-V HIS-(R)N 03 / /
Anchor Fastening Technology Manual Hilti HIT-HY 170 with HIT-V HIS-(R)N 1 Hilti HIT-HY 170 with HIT-V Injection mortar system Benefits Hilti HIT-HY 170 500 ml foil pack (also available as 330 ml foil pack)
More informationHigh Strength Epoxy tested in accordance to ICC-ES AC308
ADHESIVE ANCHORING SPECIALISTS High Strength Epoxy tested in accordance to ICC-ES AC308 2006 IBC Compliant ICC-ES Report No. 1137 DESCRIPTION/SUGGESTED SPECIFICATIONS* The epoxy resin and hardener are
More informationPF18 CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM
PF18 CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM APPROVAL DOC TDS MSDS Technical Data Sheet JAN 2016 For Install Support techadvice@allfasteners.com.au For Specification Support engineering@allfasteners.com.au
More informationSHP-VE / Hammer-in capsule Vinylester capsule resin for use in concrete
BASIC PRODUCT INFORMATION SUBSTRATE: Non-cracked concrete C20/25 C50/60 (Option 7) Reinforced and unreinforced concrete Dry or wet concrete (Category 1) Flooded holes, except sea water (Category 2) FEATURES:
More informationThis Technical Assessment meets the testing requirements stipulated in Standards Australia Technical Specification: SA TS101:2015
A founding member of AEFAC Anchor testing to TS101:2015 Appendix B performed by ramsetreid TM Concrete Structures Laboratory, an ISO 9001 Accredited Laboratory Report Number: TR16047 Fastener Technical
More informationInjection Resin Technical Guide
Injection Resin Technical Guide European Technical Approval www.vjtechnology.com Injection Resin Anchors The V.J. Technology Range VJT has an injection resin system to satisfy every possible need of the
More informationInjection Resin Technical Guide
Injection Resin Technical Guide European Technical Approval www.vjtechnology.com Injection Resin Anchors The V.J. Technology Range VJT has an injection resin system to satisfy every possible need of the
More informationDESCRIPTION ADVANTAGES
ADHESIVE ANCHORING SPECIALISTS A7P-10 The Most Versatile Quick Cure Adhesive A7P-28 APPLICATIONS / USES n Concrete dowelling (slabs, walls, columns) n Steel framing (columns, beams, ledgers) n Brick pinning
More informationA7+ The Most Versatile Quick Cure Adhesive
ADHESIVE ANCHORING SPECIALISTS A7P-10 The Most Versatile Quick Cure Adhesive A7P-28 APPLICATIONS / USES n Concrete dowelling (slabs, walls, columns) n Steel framing (columns, beams, ledgers) n Brick pinning
More informationCHEMSET 801 XTREM TECHNICAL DATA SHEET. Fast Setting Vinyl Ester For Extreme Anchoring Applications
Date of Issue: April 27, 2016 Fast Setting Vinyl Ester For Extreme Anchoring Applications CHEMSET 801 XTREM is a heavy duty Vinyl Ester mortar certified for challenging engineering design conditions such
More informationHilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1. Rebar BSt 500 S
Hilti HIT-HY 110 Injection Mortar System Benefits Hilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1 suitable for non-cracked concrete C 20/25 to C 50/60 suitable for dry and water
More informationSVM-PSC Polyester resin for use in concrete
SVM-PSC Polyester resin for use in concrete Bonded anchor with anchor rod made of galvanized steel or stainless steel of sizes M8 to M30 for use in non-cracked concrete Basic product information Features
More informationHilti HIT-ICE with rebar
Hilti HIT-ICE Injection mortar system Benefits Hilti HIT-ICE 296 ml cartridge Statik mixer rebar BSt 500 S - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity - suitable for
More informationMasterFlow 920 ANS. Epoxy acrylate (styrene-free) resin based high performance anchoring grout
Epoxy acrylate (styrene-free) resin based high performance anchoring grout DESCRIPTION MasterFlow 920 ANS is a two component epoxy acrylate resin based high performance anchoring grout. It is a styrene-free
More informationTechnical data No. 17/0001 of 25/04/2017
Hilti Corporation Feldkircherstrasse 100 FL-9494 Schaan Principality of Liechtenstein www.hilti.group Technical data No. 17/0001 of 25/04/2017 General Part Trade name Injection system Hilti HIT-RE 500
More informationFosroc Lokfix E75. High performance pure epoxy 3:1 resin cartridge system, for anchoring reinforcement and fixings into a variety of substrates.
High performance pure epoxy 3:1 resin cartridge system, for anchoring reinforcement and fixings into a variety of substrates. Re-usable Slow gel times allow for more complex procedures 24 month shelf life
More informationV420+ Hybrid Vinylester Resin
Building Confidence European Technical Approval -Option 1 for cracked concrete European Technical Approval -Post Installed Rebar LEED tested DesignFIX V420 + Hybrid is a high performance vinylester resin
More informationDeclaration of Performance
Declaration of Performance 1343-CPR-M 530-11/01.15 1. Unique identification code of the product-type: Bonded injection type anchor Mungo MIT Tropical and MIT- VE Plus for use in non-cracked concrete 2.
More informationEuropean Technical Assessment ETA-16/0865 of 08/11/2016
ETA-Danmark A/S Göteborg Plads 1 DK-21590 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationThe ONLY Fast Cure ICC-ES Listed Adhesive for Water-filled Holes and Submerged Concrete
ADHESIVE ANCHORING SPECIALISTS DESCRIPTION Fast Curing The ONLY Fast Cure ICC-ES Listed Adhesive for Water-filled Holes and Submerged Concrete The resin and hardening agent are completely mixed as they
More informationHilti HIT-CT 1 with HIT-V
Hilti HIT-CT 1 Injection mortar system Benefits - Hilti Clean technology (clean- Tec) Hilti HIT-CT 1 330 ml foil pack (also available as 500 ml foil pack) Static mixer HIT-V(-F) rods rods rods - Environmentaly
More informationEasy to Use A7 Saves You Time and Money
ADHESIVE ANCHORING SPECIALISTS Easy to Use Saves You Time and Money DESCRIPTION/SUGGESTED SPECIFICATIONS* Fast Dispensing, Fast Curing The acrylic resin and hardening agent are completely mixed as they
More informationSystem Components. Grades. General Information. Installation Information Design Information Material Information Ordering Information
General Information General Information PV5 PRO Polyester Injection Adhesive Anchoring System ProDUCT DESCRIPTION The PV5PRO is a twocomponent polyester adhesive anchoring system. The system includes injection
More informationRS 600 High Strength Epoxy Anchoring System
RS 600 High Strength Epoxy Anchoring System Pilgrim Permocoat, Inc. 402 S. 22nd Street, Tampa, FL 33605 (83) 248-3328 FAX# (83) 248-076 www.pilgrimpermocoat.com PILGRIM RS 600 Cartridge is a two-component,
More informationAC50 Silver Adhesive Anchoring System
General Information General Information AC50 Silver Adhesive Anchoring System Product Description The AC50 Sliver is a two-component, adhesive anchoring system. The system includes injection adhesive in
More informationTP EA. Product Description. Properties and Benefits. Applications. Reaction Resin Mortar Based on Epoxy Acrylate. Approvals / Certificates:
Approvals / Certificates: Product Description The TP EA is a 2-component reaction resin mortar based on an epoxy acrylate. This product may be used in combination of a hand-, battery- or pneumatic tool
More informationDesignated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment)
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011
More informationAnchor Fastening Technology Manual. HIT-HY 170 mortar with rebar (as anchor) Hilti HIT-HY 170 mortar with rebar (as anchor) Version
Anchor Fastening Technology Manual Hilti HIT-HY 170 mortar with HIT-HY 170 mortar with rebar (as anchor) Version 2016-10 1 November 3, 2016 Hilti HIT-HY 170 mortar with Injection mortar system Benefits
More informationEuropean Technical Assessment. ETA 15/0226 of General Part TCM400PE, TCM600PE. Trade name of the construction product
Member of Wellington, 19 ES 08018 Barcelona Tel: (+34) 93 309 34 04 qualprod@itec.cat www.itec.cat www.eota.eu European Technical Assessment ETA 15/0226 of 17.04.2015 General Part Trade name of the construction
More informationEuropean Technical Assessment ETA-15/0288 of 17/06/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationCIA-GEL 7000 EPOXY. One Product For All Applications ADHESIVE ANCHORING SYSTEMS FOR CONCRETE AND MASONRY
CIA-GEL 000 EPOXY One Product For All Applications ADHESIVE ANCHORING SYSTEMS FOR CONCRETE AND MASONRY City of Los Angeles Research Report No. (in Concrete, Block and Brick) City of Los Angeles Research
More informationSystem Components. Grades. General Information Installation Information
General Information SECTION CONTENTS AC100-PRO General Information Installation Information Vinylester Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The AC100-PRO is a two-component
More informationMasterFlow 936 AN. Pure epoxy (3:1) resin based high performance anchoring grout
Pure epoxy (3:1) resin based high performance anchoring grout DESCRIPTION MasterFlow 936 AN is a two component (3:1) pure epoxy resin based high performance anchoring grout for use in cracked and un. Designed
More informationConstruction. Universal anchoring adhesive. Product Description 1 1/7. Product Data Sheet Edition _1 Sika AnchorFix -S
Product Data Sheet Edition 2010-08_1 Sika AnchorFix -S Sika AnchorFix -S Universal anchoring adhesive Construction Product Description Uses Characteristics / Advantages Styrenated polyester based two part
More informationVF22PRO Chemical Injection System STYRENE-FREE INJECTION SYSTEM - VINYLESTER
CHEMICAL ANCHORING SYSTEMS TECHNICAL DATA SHEET VF22PRO Chemical Injection System STYRENE-FREE INJECTION SYSTEM - VINYLESTER STYRENE FREE - STYRENE FREE - LOW VOC VF22PRO is a versatile high-strength two-part
More informationR-CAS-V Spin-In Capsule with Threaded Rods
R-CAS-V Spin-In Capsule with Threaded Rods High-performance, quick-setting, styrene-free vinylester resin for concrete Approvals and Reports ETA-10-0108 Product information Features and benefits Approved
More informationTECHNICAL DATA SHEET SIKA ANCHORFIX-1 GREY 300ML (6's)
TECHNICAL DATA SHEET SIKA ANCHORFIX-1 GREY 300ML (6's) Sika AnchorFix-1 is a single cartridge, two component, mix-in-the-nozzle, fast curing, solvent and styrene free, methacrylate based chemical anchoring
More informationDeclaration of Performance
Declaration of Performance 1343-CPR-M 530-7/01.15 1. Unique identification code of the product-type: Bonded injection type anchor Mungo MIT-SP/MIT-SPE Plus, MIT-SP Winter for use in non-cracked concrete
More informationInjection System VMZ. Injection System for cracked and non-cracked concrete. Conical Stud VMZ-A. Cartridge VMZ 150
Injection System for cracked and non Injection System Conical Stud A Cartridge Coaxial Cartridge for silicone guns Content: ml Cartridge 2 Coaxial Cartridge for silicone guns Content: 2ml, incl. 2 Static
More informationHigh Strength Epoxy tested in accordance to ICC-ES AC308
ADHESIVE ANCHORING SPECIALISTS High Strength Epoxy tested in accordance to ICC-ES AC308 2006 IBC Compliant ICC-ES Report No. 1137 DESCRIPTION/SUGGESTED SPECIFICATIONS* The epoxy resin and hardener are
More informationCHEMICAL /4" 3/8" to 5/8" /8" 3/4" to 1-1/4" 1 10
194 ASTM A193 GRADE B7 HIGH-STRENGTH CARBON, ZINC PLATED (ASTM B 633 YELLOW DICHROMATE) B7 (AISI 414) anchor rod is supplied with nuts meeting the requirements of ASTM Specification A 194, Grade 2H (ASTM
More informationApprovals / Certificates:
Approvals / Certificates: Product Description The TP E SD mortar is a 2-component reaction resin mortar based on a pure epoxy and will be delivered in an exclusive 2-C cartridge system. This high performance
More informationSubmittal Information
Adhesive Fast Dispensing, Fast Curing The acrylic resin and hardening agent are completely mixed as they are simultaneously dispensed from the dual cartridge through a static mixing nozzle, directly into
More informationPage 9, issued on 03. February 2009 Threaded rod M8, M10, M12, M16, M20, M24, M27, M30 with washer and hexagon nut L df h h ef 0 tfix h min Reinforcing bar 8, 10, 12, 14, 16, 20, 25, 28, 32 acc. to Annex
More informationAdhesive Anchoring Selection Guide Solid Concrete Applications
ADHESIVE ANCHORING SPECIALISTS Adhesive Anchoring Selection Guide Solid Concrete Applications Doweling into Concrete with Rebar ultimate tensile product systems key features properties performance 1,2
More informationHigh-performance anchoring adhesive. n Styrene-free n Low odour n Low wastage n No transportation restrictions
Product Data Sheet Edition 23/12/2008 Identification no: 02 04 02 06 001 0 000020 Sika AnchorFix -2 Sika AnchorFix -2 High-performance anchoring adhesive Construction Description Uses Characteristics /
More informationEnglish translation prepared by CSTB - Original version in French language
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical
More informationHilti HIT-RE 500 V3 mortar with HIT-V rod
Hilti HIT-RE 500 V3 Injection mortar system Hilti HIT-RE 500 V3 330 ml, 500 ml and 1400 ml foil pack Static mixer HIT-V rod Benefits - SafeSet technology: Simplified method of borehole preparation leaving
More informationR-CAS-V Spin-In Capsule with Threaded Rods
R-CAS-V Spin-In Capsule with Threaded Rods High-performance, quick-setting, styrene-free vinylester resin for concrete Approvals and Reports ETA-10-0108 Product information Features and benefits Approved
More informationCONCRETE ANCHORING SYSTEMS
CONCRETE ANCHORING SYSTEMS Notes RH 2 CONCRETE ANCHORING SYSTEMS TABLE OF CONTENTS Anchoring Working Principles... RH 4 Red Head Adhesive Anchoring Systems... RH 7 Adhesive Anchoring Selection Guide...
More informationAnchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide you with
More informationMKT Fixing. JAM The Professional Standard. Quality Management. Environmental Management. Energy Management
MKT Fixing QHSAS 18001 Quality Management Environmental Management Energy Management Occupational Health and Safety Management System 36 Fire Resistance Fire Resistant Anchor Systems Tested according to
More informationSubmittal Information
Adhesive INSTALLATION STEPS 35 Minute Cure Time at 60 F Fast Dispensing at all Temperatures Cures Down to 0 F and Below Multi-Patented Formula Miami-Dade County Product Control Approved Contents: 825 ml
More informationSIMPLE CERTAINTY MAXIMUM VERSATILITY INCREASES ANCHOR RELIABILITY AND JOBSITE PRODUCTIVITY
SIMPLE CERTAINTY MAXIMUM VERSATILITY INCREASES ANCHOR RELIABILITY AND JOBSITE PRODUCTIVITY QUICK-CURE ADHESIVE ANCHOR FOR CONCRETE AND MASONRY APPLICATIONS THE RELIABLE CHOICE NO LONGER REQUIRES A CHOICE
More informationHigh-Strength Anchoring Epoxy
Product Description ULTRABOND is a 2-component, : mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 F to
More informationInject-TITE AW All-Weather
Product Description Inject-TITE AW is a two-component styrene free, acrylic system used for anchoring and doweling applications in uncracked concrete using threaded rod and rebar. May be used in temperatures
More informationPOLYESTER INJECTION MORTAR Good Quality and Competitve Price
Good Quality and Competitve Price Date of Issue: Feb 22, 2012 PRODUCT Good Use is a chemical anchor system based on the polyester mortar. The two parts are dispensed and mixed in one action through a static
More informationESR ICC Evaluation Service, Inc. Reissued January 1, 2008 This report is subject to re-examination in one year.
ESR-1967 Reissued January 1, 2008 This report is subject to re-examination in one year. ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California
More informationTechnical Data Sheet. CHEMSET INJECTION 800 SERIES Date of Issue: February 4, 2002 Page 1 of 6
Date of Issue: February 4, 22 Page 1 of 6 PRODUCT Chemset Injection 8 Series is a chemical anchor system based on epoxy mortar. The two parts are dispensed and mixed in one action through a static mixing
More informationAC200+ Acrylic Injection Adhesive Anchoring System
GENERAL INFORMATION GENERAL INFORMATION AC200+ Acrylic Injection Adhesive Anchoring System PRODUCT DESCRIPTION The AC200+ is a two-component, high strength adhesive anchoring system. The system includes
More informationPRODUCT DATA SHEET Sika AnchorFix -3001
PRODUCT DATA SHEET HIGH PERFORMANCE, PROFESSIONAL EPOXY ANCHORING ADHESIVE DESCRIPTION Solvent-free, thixotropic, 2-component, epoxy resinbased, high performance anchoring adhesive for threaded rods and
More informationSormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art.
ITH 165 Pe art. 72900 Application in noncracked concrete ITH 300 Pe art. 72940 ITH 410 Pe art. 72941 Content Page Product description 2 Properties and benefits 2 Sample applications 2 Applications and
More informationPower-Bond CHEMICAL PUMP & DUAL CARTRIDGE PRODUCT DESCRIPTION PRODUCT DESCRIPTION MIXING GUIDELINES POWER-BOND MATERIAL PROPERTIES
184 Power-Bond PUMP & DUAL CARTRIDGE BASE MATERIAL Solid Concrete, Block, Brick, Stone or Masonry SIZE RANGE 3" to Anchor Rod. No. 3 to No. 8 Reinforcing Bar Upon completion of mixing, pull the plunger
More informationSOUDAFIX VE400-SF. Temperature -10 C (1) -5 C 0 C 5 C 10 C 20 C 30 C 35 C 40 C
Revision: 20/06/2014 Page 1 of 9 Technical Data: Base Consistency Curing system (1) Cartridge temperature = 15 C (2) Curing time on dry surface (20 C/65% R.H.) (x2 on wet surface) Specific Gravity Vinylester
More informationEuropean Technical Assessment ETA-14/0453 of 11/12/2014
ETA-Danmark A/S Göteborg Plads 1 DK-21590 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationFIVE STAR PRODUCTS, INC. (800)
FIVE STAR PRODUCTS, INC. www.fivestarproducts.com (800) 243-2206 Page 1 of 11 DESIGN-A-SPEC GUIDELINES FIVE STAR RS ANCHOR GEL CONTENTS PART A - GENERAL CONDITIONS PART B - MATERIAL SPECIFICATIONS PART
More informationPRO-POXY 400 A.11. New technology for all weather anchoring... PRO-POXY 400! BENEFITS:
PRO-POXY 400 ALL WEATHER EPOXY ACRYLATE HYBRID ANCHORING GEL BENEFITS: Guns & Performs to -15 F STYRENE FREE! Meets performance requirements of ASTM-C-881; Types I, II*, IV & V * ; Classes A, B & C; Grade
More informationCITY OF LOS ANGELES CALIFORNIA
BOARD OF BUILDING AND SAFETY COMMISSIONERS MARSHA L. BROWN PRESIDENT VAN AMBATIELOS VICE-PRESIDENT VICTOR H. CUEVAS HELENA JUBANY ELENORE A. WILLIAMS CITY OF LOS ANGELES CALIFORNIA ANTONIO R. VILLARAIGOSA
More information