DINAK Camiño do Laranxo, , VIGO (SPAIN) DIFLUX POLYPOPRYLENE. TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD
|
|
- Rodger Todd
- 6 years ago
- Views:
Transcription
1 Rev.2 DECLARATION OF CONFORMITY AND PRODUCT DESCRIPTION Chimneys - System chimneys with plastic flue liners - Requirements and test methods Manufacturer: Product commercial name: Product description: DINAK Camiño do Laranxo, , VIGO (SPAIN) DIFLUX POLYPOPRYLE Double wall plastic chimney Name and function of the responsible person: Notified Body: Certificate number: Íñigo A. Canoa (General Manager) TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD Designations according to 14471: 0.1 Double wall plastic chimney (DN 160) Product description Standard number Temperature class Pressure class T120 H1 O W 2 O00 E E L0 Mechanical resistance and stability Tensile strength: 30 m. Inner roughness: 1 mm (according to Standard) coefficients ζ according to Standard Sootfire resistance Condensate resistance class Wet working conditions: Yes Corrosion resistance class Distance to combustible material Location Reaction to fire Enclosures class 1
2 Rev.2 DECLARATION OF CONFORMITY AND PRODUCT DESCRIPTION Chimneys - System chimneys with plastic flue liners - Requirements and test methods Manufacturer: Product commercial name: Product description: DINAK Camiño do Laranxo, , VIGO (SPAIN) DIFLUX POLYPOPRYLE Double wall plastic chimney Name and function of the responsible person: Notified Body: Certificate number: Íñigo A. Canoa (General Manager) TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD Designations according to 14471: 0.1 Double wall plastic chimney (DN > 160) Product description Standard number Temperature class Pressure class T120 P1 O W 2 O00 E E L0 Mechanical resistance and stability Tensile strength: 30 m. Inner roughness: 1 mm (according to Standard) coefficients ζ according to Standard Sootfire resistance Condensate resistance class Wet working conditions: Yes Corrosion resistance class Distance to combustible material Location Reaction to fire Enclosures class 2
3 Rev.2 Characteristics Unit s 1 Nominal dimensions mm 5 2 Material inner wall Quality Nominal thickness (minimum thickness mm Ref Inner: 60, 80, 100 Outer: 100, 125, 150 Polypropylene ND 60: 2,0 ND 80: 2,0 ND 100: 2,2 3 Material outer wall 6 Steel ST 1203 Values / Levels Remarks Thickness 0,8 mm 4 Thermal performance According to Mechanical behaviour and stability 6 Wind load resistance m Non applicable 7 Fire resistance 6.4 None 8 Gas tightness Recycling Accidental human contact Adjacent combustible materials 12 Thermal resistance 13 Tightness against moisture and condensate Long-term resistance to thermal load Long-term resistance to condensate exposure Resistance to wet/dry cycling Resistance to ultraviolet radiation (UV) 19 Geometrical stability 20 Reaction to fire Pressure level: DN 160: H1 (leakage rate <0.006 L/s/m 2 at 5000 Pa) DN > 160: P1 (leakage rate <0.006 L/s/m 2 at 200 Pa) Protection in the traffic area needed None None The chimney is resistant According to Long-term resistance to thermal load fulfilled Long-term resistance to condensate exposure fulfilled Resistance to wet/dry cycling fulfilled Non applicable, because the free end of the plastic flue liner is not more than 0,4 m in length exposed to UV of the sun. Fulfilled Fulfilled according to Class E 21 Seals and sealants EPDM. Fulfilled according to Density g/c m3 1,10 Hardness ShA 52 Lengthening strength to 100% MPa 1, /07 3
4 Rev.2 Characteristics Unit s Ref Tensile strength MPa 12,1 Lengthening to breakage % 489 Permanent deformation % 22 Dimensions 60, 80, 100 Values / Levels Remarks 4
5 Rev. 2 DECLARATION OF CONFORMITY AND PRODUCT DESCRIPTION Chimneys Requirements for metal chimneys. Part 1: System chimney products Manufacturer: Product commercial name: Product description: Name and function of the responsible person: Notified Body: Certificate number: DINAK Camiño do Laranxo, , VIGO (ESPAÑA) DIFLUX INOX Concentric double wall metal chimney for roomsealed appliances providing the flue gas outlet through the inner wall and the air supply through the outer wall Íñigo A. Canoa (General Manager) TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD Designations according to : 0.1 Metal chimney with seal /316L Product description Standard number Temperature level Pressure level Condensate resistance (W: wet; D: dry) Corrosion resistance and inner wall material Sootfire resistance (G: yes; O: no) and distance to combustible materials (in mm) T200 P1 W V2-L50040 O(50) Compressive strength Up to 27 m. See Annex Inner roughness: 1 mm (according to Standard) coefficients ζ according to Standard Thermal resistance 0 m 2 K / W at reference temperature Mechanical resistance and stability Non vertical installation: maximum deflection 90º and maximum length of the slope 1 m. Wind load resistance: Maximum length between supports 3 m. Maximum length from the last support 1,5 m. See Annex Wet working conditions: Yes 1
6 Rev. 2 DECLARATION OF CONFORMITY AND PRODUCT DESCRIPTION Chimneys Requirements for metal chimneys. Part 1: System chimney products Manufacturer: Product commercial name: Product description: Name and function of the responsible person: Notified Body: Certificate number: DINAK Camiño do Laranxo, , VIGO (ESPAÑA) DIFLUX INOX Concentric double wall metal chimney for roomsealed appliances providing the flue gas outlet through the inner wall and the air supply through the outer wall Íñigo A. Canoa (General Manager) TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD Designations according to : 0.1 Metal chimney with seal /444 Product description Standard number Temperature level Pressure level Condensate resistance (W: wet; D: dry) Corrosion resistance and inner wall material Sootfire resistance (G: yes; O: no) and distance to combustible materials (in mm) T200 P1 W V2-L99040 O(50) Compressive strength Up to 27 m. See Annex Inner roughness: 1 mm (according to Standard) coefficients ζ according to Standard Thermal resistance 0 m 2 K / W at reference temperature Mechanical resistance and stability Non vertical installation: maximum deflection 90º and maximum length of the slope 1 m. Wind load resistance: Maximum length between supports 3 m. Maximum length from the last support 1,5 m. See Annex Wet working conditions: Yes 2
7 Rev. 2 DECLARATION OF CONFORMITY AND PRODUCT DESCRIPTION Chimneys Requirements for metal chimneys. Part 1: System chimney products Manufacturer: Product commercial name: Product description: Name and function of the responsible person: Notified Body: Certificate number: DINAK Camiño do Laranxo, , VIGO (ESPAÑA) DIFLUX INOX Concentric double wall metal chimney for roomsealed appliances providing the flue gas outlet through the inner wall and the air supply through the outer wall Íñigo A. Canoa (General Manager) TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD Designations according to : 0.1 Metal chimney with seal /S32101 Product description Standard number Temperature level Pressure level Condensate resistance (W: wet; D: dry) Corrosion resistance and inner wall material Sootfire resistance (G: yes; O: no) and distance to combustible materials (in mm) T200 P1 W V2-L99050 O(50) Compressive strength Up to 27 m. See Annex Inner roughness: 1 mm (according to Standard) coefficients ζ according to Standard Thermal resistance 0 m 2 K / W at reference temperature Mechanical resistance and stability Non vertical installation: maximum deflection 90º and maximum length of the slope 1 m. Wind load resistance: Maximum length between supports 3 m. Maximum length from the last support 1,5 m. See Annex Wet working conditions: Yes 3
8 Rev. 2 DECLARATION OF CONFORMITY AND PRODUCT DESCRIPTION Chimneys Requirements for metal chimneys. Part 1: System chimney products Manufacturer: Product commercial name: Product description: Name and function of the responsible person: Notified Body: Certificate number: DINAK Camiño do Laranxo, , VIGO (ESPAÑA) DIFLUX INOX Concentric double wall metal chimney for roomsealed appliances providing the flue gas outlet through the inner wall and the air supply through the outer wall Íñigo A. Canoa (General Manager) TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD Designations according to : 0.1 Metal chimney with seal /304 Product description Standard number Temperature level T200 P1 W Vm- L20040 O(50) Compressive strength Up to 27 m. See Annex Inner roughness: 1 mm (according to Standard) coefficients ζ according to Standard Thermal resistance 0 m 2 K / W at reference temperature Pressure level Condensate resistance (W: wet; D: dry) Corrosion resistance and inner wall material Sootfire resistance (G: yes; O: no) and distance to combustible materials (in mm) Mechanical resistance and stability Non vertical installation: maximum deflection 90º and maximum length of the slope 1 m. Wind load resistance: Maximum length between supports 3 m. Maximum length from the last support 1,5 m. See Annex Wet working conditions: Yes 4
9 Rev. 2 Characteristics Unit s Ref Values / Levels Remarks 1.0 Nominal dimensions mm 4, 5 80, 100, 130 See Annex 2.0 Inner/outer diameter 80/125, 100/150, 130/ Inner diameter (minimum) 4.0 Inner wall material mm 4, 5 78,4; 98,4; 128,4 4, 5, Quality / 316L / 444 Nominal thickness (minimum thickness) Description according to Outer wall material / S / 304 mm 0,4 (0,34) 0,4 (0,34) 0,5 (0,44) 0,4 (0,34) 4, 5, L50040 L99040 L99050 L20040 Quality / / 316L Nominal thickness (minimum thickness) Description according to mm 0,4 (0,34) 0,4 (0,34) L20040 L50040 Quality / / / 430 Nominal thickness (minimum thickness) Description according to Insulation 7.2 None 7.0 Seals 7.2 Designation according to standard Density mm 0,4 (0,34) 0,4 (0,34) 0,4 (0,34) g/c ± 0.1 m Hardness ShA Lengthening strength to 100% Tensile strength N/m m N/m m Permanent deformation % 25 L99040 L99040 L T200 W 2 K2 I RP: IMQ- 01SG00017 Nominal dimensions 80, 100, 130 Mechanical resistance and stability Compressive strength Up to 27 m. See Annex 9.0 Tensile strength Up to 23 m. See Annex 10.0 Wind load resistance Non vertical installation Maximum length from the last support: 1,5 m. Maximum length between supports: 3 m. See Annex 11.0 Maximum deflection 90º (horizontal installation) See Annex 5
10 Rev Characteristics Maximum length of the slope Unit s Ref Gas tightness 6.3 Pressure level: P Distance to combustible materials at T200 Accidental human contact at T Thermal resistance 17.0 Condensate resistance Resistance against rainwater penetration mm (O50) m 2 K / W , Mean value of roughness Coefficients of flow resistance for fittings Terminal Coefficient of flow resistance Protection against rainwater Values / Levels Remarks 1 m. See Annex Protection in the traffic area is not needed (back ventilated air gap between de inner wall and the outer wall) Designation: W (wet) Not apply (not insulated) mm (according to standard) Values according to standard Values according to standard N.P.D Aerodynamic behavior N.P.D Corrosion resistance / 316L / / S32101 V2 V2 V2 Vm 25.0 Freeze / thaw resistance Fulfilled according to / / Dangerous substances 7.2 None 27.0 Typical installation drawing 7.2 See Annex 28.0 Assembly instructions 7.2 See Annex 29.0 Flow direction 7.2 Installation with the outer Female at the top 30.0 Storage instructions 7.2 No corrosive atmosphere 31.0 Method of application of any sealant required 7.2 None 6
11 Rev. 2 Outer material COMPRESSIVE STRGTH TSILE STRGTH Height Size D (m) Height (m) /304; / 316L; / 444; / 441; / 430 ND (mm) ND (mm) Outer material NON VERTICAL INSTALLATION Maximum deflection α (º) Maximum length of the slope Size E (m) /304; / 316L; / 444; / 441; / Outer material Model COMPRESSIVE STRGTH OF THE SUPPORT Height /304; / 316L; / 444; / 441; / 430 Wall support 080 Adjustable wall support 083 ND (mm)
12 Rev.0 DECLARATION OF CONFORMITY AND PRODUCT DESCRIPTION Chimneys Requirements for metal chimneys. Part 2: Metal liners and connecting flue pipes Manufacturer: Product commercial name: Product description: DINAK Camiño do Laranxo, , VIGO (ESPAÑA) DIFLUX ALUMINIUM EVB/01 Concentric metal chimney Name and function of the responsible person: Notified Body: Certificate number: Íñigo A. Canoa (General Manager) TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD Designations according to standard: 0.1 Metal chimney T200 P1 W Vm- L13100 O Compressive strength N.P.D. Product description Standard number Temperature level Inner roughness: 1 mm (according to Standard) coefficients ζ according to Standard Pressure level Condensate resistance (W: wet; D: dry) Corrosion resistance and inner wall material Sootfire resistance (G: yes; O: no) Thermal resistance 0 m 2 K/W at reference temperature Mechanical resistance and stability Tensile strength: 0 m. Non vertical installation: maximum deflection 90º and maximum length of the slope up to 1 m. Wet working conditions: Yes 1
13 Rev.0 Characteristics Unit s Ref Nominal dimensions mm 4, 5 60, Nominal/Outer dimension 3.0 Inner wall material mm 60/100, 80/125 4, 5, Values / Levels Quality Aluminium AW Nominal thickness (minimum thickness) Description according to Outer wall material mm 4, 5, ,0 L13100 Quality Aluminium AW Nominal thickness (minimum thickness) Description according to mm 1,0 L Insulation 7.2 None 6.0 Seals 7.2 Remarks Mechanical resistance and stability Compressive strength N.P.D. 8.0 Tensile strength m. Non vertical installation Maximum deflection 90º (horizontal installation) 10.0 Maximum length of the slope Up to 1 m Gas tightness 6.3 Pressure level: P Accidental human contact 13.0 Thermal resistance 14.0 Condensate resistance Resistance against rainwater penetration m 2 K / W Protection in the traffic area needed , Mean value of roughness Coefficients of flow resistance for fittings Terminal Coefficient of flow resistance Protection against rainwater Designation: W (wet) Not apply (not insulated) mm (according to standard) Values according to standard Values according to standard N.P.D Aerodynamic behavior N.P.D. 2
14 Rev.0 Characteristics Unit s Ref Corrosion resistance Vm 22.0 Freeze / thaw resistance Fulfilled according to Values / Levels Remarks 23.0 Dangerous substances 7.2 None 24.0 Typical installation drawing Assembly instructions Flow direction 7.2 Installation with the Female at the top See product brochures See product brochures 27.0 Storage instructions 7.2 No corrosive atmosphere 28.0 Method of application of any sealant required 7.2 None 3
Declaration of Performance (DOP)
Declaration of Performance (DOP) No. 9174 009 DOP 2014-01-27 1. Unique identification code of the product-type: Multi-wall chimney system type DW-VISION according to 2. Type, batch or serial number or
More informationDeclaration of Performance (DOP)
Declaration of (DOP) No. 9174 073 DOP 2015-07-27 1. Unique identification code of the product-type: Multi-wall chimney system type FURADO-F according to 2. Type, batch or serial number or any other element
More information2. Type, batch or serial number or any other element allowing identification of the construction product as required under Article 11(4):
1. Unique identification code of the product-type: Rigid and flexible flue liner type TEC-FLEX 2. Type, batch or serial number or any other element allowing identification of the construction product as
More informationIssued in accordance with the Construction Products Directive 89/106/EEC. Oude Veerseweg 23 Middelburg - The Netherlands
EC-DECLARATION OF CONFORMITY Page 1 / 6 0432 Issued in accordance with the Construction Products Directive 89/106/EEC Product: Twin walled stainless steel system chimney products with insulation System
More informationEEC-DECLARATION OF CONFORMITY
0432 EEC-DECLARATION OF CONFORMITY Herewith, the : interactive B.V. Lichtenhorststraat 2 Postbus 200 6940 HA Didam (NL) declares that, in accordance with EEC-Construction Products Directive 89/106/EEC,
More informationDINAK NEW. GREEN Line. Range of modular steel chimneys for combined heat and power (CHP) and micro combined heat and power (micro CHPs) equipment.
DINAK hp TUV.... SUD 0036 Type tested Production monitored Baumuster geprüft Produktion überwacht DINAK DW hp Modular steel chimney with a double insulated wall 0036 CPD 90220 028 T200 H1 W V2-L50040 O00
More informationInstallation instructions
Installation instructions Holetherm Double-walled flue gas discharge system (DW) 2016 All information in this release is subject to misprints. No liability is accepted for the consequences of misprints.
More informationDECLARATIONS OF CONFORMITY AND INSTALLATION INSTRUCTIONS FOR A CORRECT INSTALLATION OF A FLEXIBLE LINERS (METALLIC LINERS)
0063 En DECLARATIONS OF CONFORMITY AND INSTALLATION INSTRUCTIONS FOR A CORRECT INSTALLATION OF A FLEXIBLE LINERS (METALLIC LINERS) 07-2009 INDEX En Declarations of conformity: 1 - Conformity declaration
More informationSkoberne Flue systems
Skoberne Flue systems Product Catalogue 2018 2 The Skoberne flue system The components of the Skoberne flue system are made of high quality, flame-retardant polypropylene. They are characterised by their
More informationInoxSabiana 25 Flues. Stainless Steel Double Wall
Cert. n 0545/5 Flues Stainless Steel Double Wall Introduction and main constructional characteristics Double Wall, Stainless Steel Flues The is the result of innovative development based on over 0 years
More informationInstallation instructions
Installation instructions Holetherm Single-walled flue gas discharge system (EW) 2016 All information in this release is subject to misprints. No liability is accepted for the consequences of misprints.
More informationXtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade)
CERTIFICATE NO. 03/0183 DETAIL SHEET 1 Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) PRODUCT DESCRIPTION This Detail Sheet relates to Xtratherm Thin-R Partial Fill Cavity Wall Board, as
More informationINSTRUCTION MANUAL OF INSTALLATION, SELECTION AND OPERATION OF METAL CHIMNEYS AND THEIR SYSTEM ELEMENTS
INSTRUCTION MANUAL OF INSTALLATION, SELECTION AND OPERATION OF METAL CHIMNEYS AND THEIR SYSTEM ELEMENTS Edition No. 4 Approved: 03 07 2016 2016 Manufacturer: SAURESTA UAB Rasų street 39, LT-11351 Vilnius,
More informationIndependent certification of your products & services. 2.2 Relevant Standards 1. SCOPE
1. SCOPE This schedule specifies requirements for the AquaSpira CSR (Composite Steel Reinforced) pipe system as manufactured by AquaSpira Limited. It is applicable for underground gravity drains, sewer
More informationfemale pipe. A Wall Support must be installed just above the tee and at least every 8 feet thereafter. If the pipe is to be run through a roof overhang then a Flashing, Storm Collar and Vertical Rain Cap
More informationDate of update January 25, 2018 Valid until
CERTIFICATE PRODUCT APPLICATION VTT-C-4805-09 Date of update January 25, 2018 Valid until 12.10.2020 U Protect fire insulation solutions for ventilation ducts MANUFACTURER Saint-Gobain Finland Oy / ISOVER
More informationInstallation Instructions
Installation Instructions Flue Gas System Basic Kit HT-K - Horizontal Flue Gas System For GB125 Oil Condensing Boiler For trained and certified Installers Please read carefully prior to installation. 6
More informationCorium Brick Rainscreen System Specifications
CORIUM BRICK RAINSCREEN SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Work Included: The Work of this Section shall include but not be limited to the following: 1. Corium brick plates 2. Galvanized and coated
More informationHEATING SOLUTIONS LTD. Cascade Flue Systems
HEATING SOLUTIONS LTD Cascade Flue Systems 01256 587 800 Cascade Flue Systems The two types of Vertical Cascade Flue Systems from Gemtex prevent multiple flue penetrations through roofs or walls by allowing
More informationExterior Wall Solutions Building Shell
A strong, water tight and thermally insulated building shell will ensure the buildings sustainability of usage over time. The Exterior Shell is the most important factor of protection to ensure that the
More informationASSE International Product (Seal) Listing Program. ASSE Outdoor Enclosures for Fluid Conveying Components
ASSE International Product (Seal) Listing Program ASSE 1060-2017 Outdoor Enclosures for Fluid Conveying Components Manufacturer: Contact Person: E-mail: Address: Laboratory: Laboratory File Number: Model
More informationInstallation instruction
Installation instruction Ci51 www.contura.eu 114 CERTIFICATE Declaration of performance according to Regulation (EU) 305/2011 No. Ci51-CPR-150821-SE-2 PRODUCT Product type Type designation Manufacturing
More informationPRODUCT APPLICATION MANUFACTURER INTRODUCTION CERTIFICATION PROCEDURE. Date of update April 6, 2018 Valid until
CERTIFICATE VTT-C-12188-17 Date of update April 6, 2018 Valid until 6.12.2022 PRODUCT APPLICATION CONLIT insulation solutions for ventilation ducts MANUFACTURER Rockwool Finland Oy P.O. Box 78 FI-01511
More informationiglidur J200 For Anodized Aluminium iglidur J200 Phone Fax Very long service life with hard anodized aluminium
For Anodized Aluminium Very long service life with hard anodized aluminium Low coefficients of friction Low wear Maintenance-free 28.1 For Anodized Aluminium The specialist for low friction-values and
More informationØ mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGY OF SUCCESS ISO 9001
Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGY OF SUCCESS Contents 3 System KAN-therm PP The material... 94 Sanitary systems installation... 95 Pipes... 95 Thermal elongation...
More informationDECLARATION OF PERFORMANCE
EN DECLARATION OF PERFORMANCE according to Annex III of the Regulation (EU) Nr. 305/2011 (Construction Products Regulation) Hilti Firestop Wrap CFS-W No. Hilti CFS 0843-CPD-0103 1. Unique identification
More informationAir flue duct for use with ecotec boilers
For the installer Flue installation instructions Air flue duct for use with ecotec boilers Concentric System Ø 80/5 (Galvanized steel air duct/plastic flue duct) GB Contents Notes on the documentation
More informationSheet Metal Protective Films
Sheet Metal Protective Films Protective films manufactured by R-FOLL based on an adhesive polyethylene film are designed for protecting surfaces from mechanical and chemical damage. Our films form a temporal
More informationPipe Joints. Requirements and Test Methods. VdS-Guidelines for water extinguishing systems. VdS en. VdS en : (01)
VdS-Guidelines for water extinguishing systems VdS 2100-6en Requirements and Test Methods Reproduction prohibited even for internal use VdS 2100-6en : 2004-01 (01) Publisher and Publishing house: VdS Schadenverhütung
More informationP36-10 / P36E-10 Gas Fireplace. 11 W.C. (2.74 kpa) 10 W.C. (2.49 kpa) 6.4 W.C. (1.59 kpa) 22,000 BTU/h (6.44 kw) 28,500 BTU/h (8.
Model P36-NG10 P36-LP10 P36E-NG10 P36E-LP10 Fuel Type Natural Gas Propane Natural Gas Propane Gas Fireplaces P36-10 / P36E-10 Gas Fireplace Minimum Supply Pressure 5 W.C. (1.25 kpa) 12 W.C. (3.00 kpa)
More informationINSTRUCTION MANUAL OF INSTALLATION, SELECTION AND OpERATION OF METAL CHIMNEYS AND THEIR SYSTEM ELEMENTS
INSTRUCTION MANUAL OF INSTALLATION, SELECTION AND OpERATION OF METAL CHIMNEYS AND THEIR SYSTEM ELEMENTS Edition No. 6 Approved: 2017-02-05 2017 Manufacturer: SAURESTA UAB Rasų street 39, LT-11351 Vilnius,
More informationMetal Roof Certification & Listing Program
145 Limekiln Road, Suite 100B Issue Dated: 10/27/2017 New Cumberland, PA 17070 Revision Date: 10/27/2017 www.keystonecerts.com Expiration Date: 10/27/2022 Construction Specifications Institute (CSI) Category:
More informationInstallation Instructions
Installation Instructions Flue Gas System Basic Kit GA-K - Chimney Flue Gas System for GB125 Oil Condensing Boiler For trained and certified installers Please read carefully prior to installation. 6 720
More informationP36 / P36E Gas Fireplace. 11 W.C. (2.74 kpa) 10 W.C. (2.49 kpa) 6.4 W.C. (1.59 kpa) 22,000 BTU/h (6.44 kw) 28,500 BTU/h (8.35 kw)
P36 / P36E Gas Fireplace Model P36-NG10 P36-LP10 P36E-NG10 P36E-LP10 Fuel Type Natural Gas Propane Natural Gas Propane Minimum Supply Pressure 5 W.C. (1.25 kpa) 12 W.C. (3.00 kpa) 5 W.C. (1.25 kpa) 11
More informationPRODUCT CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE
Certificate No C-11669-16 Issued June 14, 2016 Updated September 12, 2018 PRODUCT CERTIFICATE NAME OF PRODUCT Knauf Insulation Fire Insulation System for ventilation ducts MANUFACTURER Knauf Insulation
More informationEPV Pellet Vent Pellet Stove Venting System Installation Instructions
EPV Pellet Vent Pellet Stove Venting System Installation Instructions A MAJOR CAUSE OF VENT RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF THE
More informationXtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade)
CERTIFICATE NO. 03/0183 DETAIL SHEET 1 Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) PRODUCT DESCRIPTION This Detail Sheet relates to Xtratherm Thin-R Partial Fill Cavity Wall Board, as
More informationDunbrik A1 Concrete Flue Liners
Dunbrik A1 Concrete Flue Liners System Guide Firebelly stove FB2 woodburner in pewter domestic flue & chimney systems Certificate No.FM24104 Benefits of a Chimney A chimney adds appeal to a house A real
More informationPIPEWORK INSULATION. 14/ Page 1 of 10 Pipework Insulation Rev D
PIPEWORK INSULATION 14/10-2014 Page 1 of 10 Pipework Insulation Rev D Contents INTRODUCTION General Scope Surfaces to be Insulated Pumps, Turbines etc Performance Minimum Pipe Insulation Thickness Physical
More informationF Ü R D I E ZU K U N FT G E DAC HT. Flat roof vents. Soil vent pipes Refurbishment vents Cold roof vents
F Ü R D I E ZU K U N FT G E DAC HT. Flat roof vents 1 Soil vent pipes Refurbishment vents Cold roof vents F Ü R D I E ZU K U N FT G E DAC HT. alwitra waterproofing system Flat roof vents are part of the
More informationDWKL/SWKL PRODUCT LINE DWFL/SWFL PRODUCT LINE DWGV/SWGV PRODUCT LINE
For Our Representatives Clarification of Jeremias Products for Specific DWKL/SWKL PRODUCT LINE DWFL/SWFL PRODUCT LINE DWGV/SWGV PRODUCT LINE Some of you are confused with our product variations, and what
More informationBuildingName The Description of the Project P DOCUMENTS
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
More informationEuropean Technical Assessment. ETA-18/0083 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (EU) No 305/2011 Member of www.eota.eu
More informationiglidur A180 Very Appetising iglidur A180 Fax Phone
Very Appetising The material complies with FOOD AND DRUG ADMINISTRATION (FDA) regulations For direct contact with food or pharmaceuticals For wet environments 7.1 Very Appetising The material complies
More informationXtratherm Thin-R Thermal Liner (XT/TL Grade)
CERTIFICATE NO. 03/0183 DETAIL SHEET 4 Xtratherm Thin-R Thermal Liner (XT/TL Grade) PRODUCT DESCRIPTION: This Detail Sheet relates to Xtratherm Thin-R Thermal Liner, as defined in NSAI Agrément Certificate
More informationA. This Section provides information regarding vapor permeable roof underlayment for the exterior roof.
DELTA -VENT S Vapor Permeable (Breathable) Roof Underlayment Division 7 Thermal and Moisture Protection PART 1 GENERAL 1.1 SUMMARY A. This Section provides information regarding vapor permeable roof underlayment
More informationMULTILINE FLUE KIT EVOMAX P - 80P
MULTILINE FLUE KIT EVOMAX 30-150 30P - 80P When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance specification that we require. Do
More informationMetal Roof Certification & Listing Program. 4. Evaluated Roof System Description: 1. Program Licensee: 2. Certified Roof Covering: 5.
11030 002 KCI 145 Limekiln Road, Suite 100B Issue Dated: 11/29/2017 New Cumberland, PA 17070 Revision Date: 11/29/2017 www.keystonecerts.com Expiration Date: 11/29/2022 Construction Specifications Institute
More informationAPPENDIX "B" November 5, 2002 Page 1 of 6 BOILERSMITH LTD. STACKS AND BREECHING
APPENDIX "B" November 5, 2002 Page 1 of 6 BOILERSMITH LTD. STACKS AND BREECHING NOTE The Stack and Breeching shall be installed in conformance with national, regional and local codes and standards and/or
More informationMidtherm Vitrelux flue pipe is available from stock, in the following standard colours and diameters, unless otherwise stated:
Introduction Midtherm Flue Systems Limited is an independent ritish manufacturing company producing a wide range of flue and chimney products, along with associated components and services. Established
More informationAppraisal No. 719 (2011) BRANZ Appraisals Marshall Innovations Limited BRANZ
TRADE-SEAL PIPE AND SERVICES Amended 16 June 2014 s Technical Assessments of products for building and construction. Marshall Innovations Limited PO Box 9411 Greerton Tauranga Tel: 07 543 0948 Fax: 07
More informationEN :2003. TESTS OF INDUSTRIAL, COMMERCIAL and GARAGE DOORS and GATES. A Report To: D4 Products Ltd. Document Reference: WIL
Exova Warringtonapt Key Industrial Park Fernside Road Willenhall West Midlands WV13 3YA T : +44 (0) 1902 722 122 F : +44 (0) 1902 727 242 E : willenhall@exova.com W: www.exova.com EN13241-1:2003 TESTS
More informationType II Environmental Declaration according ISO 14021:2001/A1:2011
Type II Environmental Declaration according ISO 14021:2001/A1:2011 Product: Hunter Douglas Panels Module 200-600mm Product code: 26005 Module 601-900mm Product code: 26025 Module 901-1200mm Product code:
More informationCERTIFICATE No VTT-C Date of issue
NAME OF PRODUCT CERTIFICATE No VTT-C-9190-12 Date of issue 3.12.2012 CERTIFICATE HOLDER ACTIS SA Avenue de Catalogne 11300 Limoux France MANUFACTURER ACTIS SA PRODUCT DESCRIPTION is a vapour control multifoil
More informationQuality NBR Insulation
Quality NBR Insulation Thickness Guide for Condensation Control Recommended Thickness (mm) for Condensate, Chilled Water and Refrigeration Systems Ambient Temperature 26 o C 30 o C 35 o C Relative Humidity
More informationFabrications, Safety & Lighting Solutions. Product Data Sheet. Kingspan Day-Lite Trapezoidal Plus KS1000 DLTR PLUS 1.3 & 0.8
Fabrications, Safety & Lighting Solutions Kingspan Day-Lite KS1000 DLTR PLUS 1.3 & 0.8 Applications Designed to be an integral part of the Trapezoidal Roof panel system, Kingspan Day-Lite is a range of
More informationGas Fireplaces. P36D-10 Gas Fireplace. Unit Dimensions With Vignette Faceplate. *** Important: Framing height requires consideration of the hearth
28-15/16 (735mm) Model P36D-NG10 P36D-LP10 Fuel Type Natural Gas Propane Gas Fireplaces Minimum Supply Pressure Manifold Pressure - High Manifold Pressure - Low 5 W.C. (1.25 kpa) 3.8 W.C. (0.95 kpa) 1.1
More informationDraft proposals for Test methods for close-coupled solar water heating systems - Reliability and safety
IEA/SHC Task 57, Subtask B Draft proposals for new test procedures B4: Final Draft Draft proposals for Test methods for close-coupled solar water heating systems - Reliability and safety HE Zinian Beijing
More informationFabrications, Safety & Lighting Solutions. Product Data Sheet. Kingspan Day-Lite Klick KS500 DLKK
Fabrications, Safety & Lighting Solutions Kingspan Day-Lite KS500 DLKK Applications Kingspan Day-Lite is a secret-fix wall light system typically suited for vertical applications. Featuring an innovative
More informationEuropean Technical Assessment. ETA-11/0372 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (EU) No 305/2011 Member of www.eota.eu
More informationiglidur F The Lightning Conductor iglidur F Phone Fax Electrically conductive High compressive strength
The Lightning Conductor Electrically conductive High compressive strength High temperature resistance High p x v value Good resistance to chemicals 11.1 The Lightning Conductor When the electrical conductivity
More informationFire resistant toughened safety glass. Heat-reflective coating*
Thermally toughened soda-lime silicate safety glass in conformance with EN 12150 VETROFLAM 30 Fire resistance (EN 13501-2) 30 A1 ±0.2 mm 1 (C) 1 classification CE certificate No. of conformity 0336-CPR-5064F/ID
More informationRevision:C Pipework Insulation Issued:14/11/2012 PIPEWORK INSULATION CU14. 14/11/2012 Page 1 of 10 Pipework Insulation - RevC
PIPEWORK INSULATION CU14 14/11/2012 Page 1 of 10 - RevC Contents INTRODUCTION 5 General 5 Scope 5 Surfaces to be Insulated 5 Pumps, Turbines etc 5 Performance 6 Minimum Pipe Insulation Thickness 6 Physical
More informationSI T T FST
SI 440-600-700-700T-780-780T-900-1100 Freestanding TAPER TOP Open Fire - Wood Burner Installation Instructions Note: FLUE SYSTEMS Casing. Flue System may require to be Doubled Lined to Comply. Ref ASNZS:2918:2001
More informationROCKWOOL Board Insulation Section Master Guide Specification Page 1 Jan 2017
Master Guide Specification Page 1 Click on the pilcrow in the MS Word Toolbar to toggle ROCKWOOL GUIDE NOTES on and off. Delete this text before incorporating the section into a Project Manual. 1 GENERAL
More information1. Description Damper Design Dimensions, weights Placement and Assembly Statement of installations...
These technical specifications state a row of manufactured sizes and models of fire dampers (further only dampers) CFDM. It is valid for production, designing, ordering, delivery, assembly and operation.
More informationSoCal Dynamic Dome Skylight SECTION UNIT SKYLIGHTS
VELUX SECTION 08 62 00 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Dynamic dome unit skylight with formed curb counterflashing for mounting on site-built or prefabricated roof curbs, for flat, low-slope and
More informationXtratherm Thin-R Thermal Liner (XT/TL Grade)
CERTIFICATE NO. 03/0183 DETAIL SHEET 4 Xtratherm Thin-R Thermal Liner (XT/TL Grade) PRODUCT DESCRIPTION: This Detail Sheet relates to Xtratherm Thin-R Thermal Liner, as defined in NSAI Agrément Certificate
More informationSPECIFICATION For the Supply and Installation of BRITAL SG-2-56-HFF. Two Sided Structurally Glazed Curtain Walling. (Horizontal Structural joints)
SPECIFICATION For the Supply and Installation of BRITAL SG-2-56-HFF Two Sided Structurally Glazed Curtain Walling (Horizontal Structural joints) Issue date Revision Comment R0 Draft 05/05/09 R1 Approved
More informationARTICLE 12 INTERNATIONAL RESIDENTIAL CODE 2012 International Residential Code Modification Summary (Statutory Authority: 1976 Code Section )
8-1200. International Residential Code. ARTICLE 12 INTERNATIONAL RESIDENTIAL CODE 2012 International Residential Code Modification Summary (Statutory Authority: 1976 Code Section 6-9-40) NOTE-This article
More informationRegency Bellerive & Berwick Zero Clearance Box and Flue Kit Part No Assembly Instructions
Regency Bellerive & Berwick Zero Clearance Box and Flue Kit Part No 946-762 Assembly Instructions Kit Contents 63 screws Base assembly LH Inner side panel RH Inner side panel Back Inner panel Top Inner
More informationOne off tiled/mortared stoves Calculation method
CEN/TC 295 Date: 2005-05 TC 295 WI CEN/TC 295 Sekretariat: BSI One off tiled/mortared stoves Calculation method Ortsfest gesetzte Kachelöfen/Putzöfen Berechnungsverfahren ICS: 91.140.20 Deskriptoren Dokument-Typ:
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C Date of issue , Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More informationA Closer Look Inspection Service 2015 IECC Residential DFW area handout
103.2 Information required on construction documents 1. Designation of the Thermal Building Envelope on the plans 2. Insulation Material and their R Value 3. Fenestration U and SHGC values 4. Area weighted
More informationTechnical Assessment Body issuing the ETA: Kiwa Nederland B.V. Sinh Board
Member of Kiwa Nederland B.V. www.eota.eu Sir Winston Churchilllaan 273 NL-2288 EA Rijswijk Postbus 70 NL-2280 AB Rijswijk Tel.: +31 (0)88 998 44 00 Fax: +31 (0)88 998 44 20 E-mail: info@kiwa.nl European
More information1. Description Damper Design Dimensions, weights Placement and Assembly Statement of installations...
These technical specifications state a row of manufactured sizes and models of fire dampers (further only dampers) CFDM. It is valid for production, designing, ordering, delivery, assembly and operation.
More informationThe syphonic roof drainage system
The syphonic roof drainage system P. C. Chang, Mr. Abstract The Geberit Pluvia roof drainage system is based on the ingenious gravity-induced vacuum principle. Consisting of HDPE roof outlets, pipes and
More informationInstallation Instructions
Installation Instructions SAVE THESE INSTRUCTIONS Please read this entire manual before you install and use your room heater. Failure to follow instructions may result in property damage, bodily injury,
More informationCUAP 06.02/13. Blind rivets for metal members and sheeting
CUAP 06.02/13 Common Understanding of Assessment Procedure for European Technical Approval according to Article 9.2 of the Construction Products Directive Blind rivets for metal members and sheeting Version
More informationSprinkler Identification Numbers (SINs)
Worldwide Contacts www.tyco-fire.com Model 2.8 K-factor Combustible Concealed Space Sprinklers Specific Application, Upright General Description The Model Combustible Concealed Sprinklers are fast response,
More informationAssembly Instruction. FLAMRO Variant N II A / N II KS
Assembly Instruction / N II KS Please respect the permit specifications. All documents may be downloaded from www.flamro.com/services/downloads. It is assumed that - any damage to the seal will be repaired
More informationGas Fireplaces. P33-10/P33E-10 Gas Fireplace P33 DIMENSIONS WITH VIGNETTE FACEPLATE CLEARANCES WITH VIGNETTE FACEPLATE
Model P33-NG10 P33-LP10 P33E-NG10 P33E-LP10 Fuel Type Natural Gas Propane Natural Gas Propane Minimum Supply Pressure 5 W.C. (1.25 kpa) 11 W.C. (2.74 kpa) 5 W.C. (1.25 kpa) 11 W.C. (2.74 kpa) Manifold
More informationSI T T FSS/FSTT Open Fire
SI 440-600-700-700T-780-780T-900-1100 FSS/FSTT Open Fire Freestanding Solid Fuel Burner - Indoor Open Wood Fire Available in Square Top or Taper Top Options Installation Instructions Note: Flue System
More informationAll pipes and fittings produced by Iplex Pipelines are manufactured using a Quality Management System accredited to ISO 9001:2000.
IPLEX PIPELINES - THE COMPANY Iplex Pipelines (NZ) Limited manufactures a comprehensive range of plastic pressure and non-pressure pipe systems for the building, civil, rural, telecommunication, energy
More informationEarth Retaining Structures and Systems Submittal Checklist. Part One: Materials and Material Properties
Earth Retaining Structures and Systems Submittal Checklist Part One: Materials and Material Properties Provide a sample of the reinforcement material and material specifications describing the material
More informationESSERGULLY. Safe conventional drainage. Gully systems for flat roofs, balconies and terraces
2017 ESSERGULLY Safe conventional drainage Gully systems for flat roofs, balconies and terraces 2 ESSERGULLY The system for safe conventional drainage The tried and trusted system for the internal drainage
More informationArcwall. Rain Screen Wall System
Arcwall Rain Screen Wall System Arcwall is an economical drained and back-ventilated rain screen system for both walls and soffits manufactured from formed aluminum or stainless plate. The system combines
More informationmcr LAM louvered vents
mcr LAM louvered vents KLAPY LOUVERED ŻALUZJOWE VENTS Smoke and hot gases generated during fire pose a serious hazard to the life of people in burning rooms, to the property stored in the building and
More informationiglidur A180 FDA-general purpose waterproof material
A18 A18 FDA-general purpose waterproof material Standard range from stock The A18 material complies with FOOD AND DRUG ADMINISTRATION (FDA) regulations For direct contact with food or pharmaceuticals For
More informationEuropean Technical Assessment ETA-18/0449 of 2018/06/01
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according toarticle 29 of the Regulation (EU) No 305/2011 of
More informationCharacteristics of Packings for Stuffing Boxes for the Proof of Strength, Function and Tightness of Valves
Characteristics of Packings for Stuffing Boxes for the Proof of Strength, Function and Tightness of Valves Jaroslav Bartonicek 1), Rolf Hahn 2), Hans Kockelmann 2), Eberhard Roos 2) and Friedrich Schöckle
More informationCRYOGENIC SUPPORTS INTRODUCTION
1 2 3 4 INTRODUCTION Pipe Supports Group has developed a range of cryogenic products to meet the varying requirements of both the Piping and the Pipe Supporting Engineers. Our solutions provide options
More informationSRP-AirOutshield ROOF Issued:
SECTION 07276: Breathable Underlayment Guide Specification This specification is a guide only and may need editing for the specific intended application. It is the responsibility of the design professional
More informationDANGEROUS GOODS PETRO INDUSTRIAL TANK COMPLIANCE CHECKLIST FORM
DANGEROUS GOODS PETRO INDUSTRIAL TANK COMPLIANCE CHECKLIST FORM Tank Manufacturer : Consultant Ref No. File No. PETRO Industrial Pty Ltd Kelvin Cooper - Accreditation Number 6IM055 KGC 150213 Proposed
More informationROCKWOOL Board Insulation Section Master Guide Specification Page 1 Jan 2017
Master Guide Specification Page 1 Click on the pilcrow in the MS Word Toolbar to toggle ROCKWOOL GUIDE NOTES on and off. Delete this text before incorporating the section into a Project Manual. 1 GENERAL
More informationDesign Criteria, CPVC Pipe
Worldwide Contacts www.tyco-fire.com Model CC3 4.2 and 5.6 K-factor Combustible Concealed Space Sprinklers Specific Application, Upright General Description The Model CC3 Combustible Concealed Sprinklers
More informationATTENTION INSTALLING PERSONNEL
DCVK-20 & DCVK-30 CONCENTRIC VENT TERMINATION KIT INSTALLATION INSTRUCTIONS Goodman Manufacturing Company, L.P. 2003-2007 5151 San Felipe, Suite 500, Houston, TX 77056 www.goodmanmfg.com -or- www.amana-hac.com
More informationHoesch isodach integral Technical information
Technical information A company of ThyssenKrupp Steel tk Contents Page General 3 Main dimensions and properties 4 Corrosion protection 5 Thermal protection / Insulating core 5 Fire protection 5 Information
More informationBeele Engineering B.V.
561/170522 Covenant K96711/01 Issued 2017-09-15 Replaces - Page 1 of 18 STATEMENT BY KIWA With this Covenant, issued in accordance with the Kiwa Regulations for Product Certification, Kiwa declares that
More informationROOFING UNDERLAYS AND MEMBRANES.
RFING UNDERLAYS AND MEMBRANES 1 2 DES YUR RF BREATHE? MEMBRANES THE WAY T A WARM AND DRY RF WATERTIGHTNESS VAPUR - PERMEABILITY The FAKR Company offers a wide range of membranes and underlays designed
More information