CONCRETE ACCESSORIES. Plastic. Spacers SPACERS
|
|
|
- Chloe Campbell
- 6 years ago
- Views:
Transcription
1 ACCESSORIES Plastic Spacers 60
2 REBAR LOCKING WHEEL The CONAC Wheel Chairs are the strongest wheel chairs on the market. The patented locking system will not allow the wheel to rotate around the rebar or slide along the rebar, assuring that the rebar will stay in place. CONAC Locking Wheels are available for cover from 1" to 3". REFERENCE RW10L 1 3 & RW12L 1 1/4 3 & RW15L 1 1/ RW20L RW25L 2 1/ RW30L U.S. Patents # 7,451,579 and 5,347,787 REBAR WHEELS Spacer for universal use. Clamping tongues for a wide range of bar sizes. Wide contact surface and foot members increase load-carrying capacity and prevent tipping. Open construction which does not interrupt concrete flow. Minimal contact with formwork. Type M Type M5-M6 Wide range rebar RW05M 12.5/4-8 1/ RW58M 15/4-8 5/ RW58M4 15/8-12 5/ RW58M5 15/ / RW585 15/ / RW75M 20/4-8 3/ RW75M3 20/6-10 3/ RW75M5 20/6-18 3/ RW75M6 20/4-18 3/ RW10M 25/ RW10M5 25/ RW103 25/ RW145 25/ RW121 30/ / RW126 30/ / RW15M 40/ / RW15M5 40/ / RW153 40/ / RW154 40/ / RW158 40/ / RW20M 50/ RW20M6 50/ RW203 50/ RW204 50/ RW238 60/ / RW254HD 60/ / RW259 60/ / RW30M5 75/ RW RW375 95/ /4 M RW / RW40M5 100/
3 REBAR SPUNCAST WHEEL Special rebar wheel used in the manufacturing of spuncast utility poles. REFERENCE COLOR RW 10MM 3/ Gray RW 10MMB 3/ Black RW 10MMG 3/ Green PICOFIX Economical round spacer with extra wide bar support. Minimal formwork contact. RW58MP 15/5-10 5/8 M RW75MP 20/5-10 3/4 M RW10MP 25/4-8 1 M RW12MP 30/ /4 M SPARFIX Inexpensive spacer for use in precast. RW05MS 10/3-5 3/8 Mesh RW58MS 15/3-5 5/8 Mesh 4000 RW75MS 20/3-5 3/4 Mesh 2000 RW10MT 25/3-5 1 Mesh
4 REBAR CLIPS NORMFIX Heavy duty chairs. BAR SIZE Normfix20 3/ Normfix Normfix30 1 1/ Normfix40 1 1/ Normfix BAR CLIPS Stable clip-on spacer for #4 & #5 Bar. SIZE (MM) BAR SIZE BCL 75 20/ / BCL 10 25/ BCL 15 40/ / BCL 20 50/ MESH CLIPS Economically priced spacer for use in low-load situations. SIZE (MM) BAR SIZE MCL75 20/5 3/ MCL10 25/ MCL15 40/5 1 1/ MCL20 50/ REBAR CLIPS Stable bottom spacer with large clamp range. SIZE (MM) RCL05 15/4-12 5/ RCL75 20/4-16 3/ RCL10 25/ RCL12 30/ / RCL15 40/ / RCL20 50/ RCL24 60/ / RCL25 65/ / RCL30 75/ SNAPFIX Stable, sturdy spacer. Low-cost, good concrete flow. Minimal formwork contact because of edge position. Snapfix25 1 M Snapfix30 1 1/4 M Snapfix40 1 1/2 M Snapfix50 2 M Snapfix60 2 3/8 M Snapfix70 2 3/4 M Snapfix80 3 M Snapfix90 3 1/2 M Snapfix100 4 M
5 REBAR CHAIRS CROSS CHAIR Cross chair is a stable, sturdy chair for bottom reinforcement. Allows excellent concrete flow with minimal form contact. CR75 3/ CR10 1 FOR 1000 CR12 1-1/4 ALL 1000 CR15 1-1/2 BAR 1000 CR20 2 SIZES 500 CR22 2-1/4 200 CR25 2-1/2 200 CR27 2-3/4 200 STACKABLE HIGH CROSS CHAIR High Cross Chair is stable, sturdy chair for top matt reinforcing. Chairs are stackable to provide additional height. CR CR32 3-1/4 200 CR35 3-1/2 200 CR37 3-3/4 FOR 200 CR40 4 ALL 200 CR42 4-1/4 BAR 200 CR45 4-1/2 200 SIZES CR47 4-3/4 200 CR White Only CR52 5-1/4 200 CR55 5-1/2 200 CR57 5-3/4 200 CR CR65 6-1/2 200 CR
6 REBAR CHAIRS AC CHAIRS Stable for vertical and horizontal reinforcement. Good concrete flow. Tapered legs to ensure minimal form contact. Perfect for exposed aggregate surfaces. AC05 15/6-20 5/8 Mesh AC75 20/6-20 3/4 Mesh AC10 25/ Mesh AC14 30/ /4 Mesh AC15 40/ /2 Mesh AC20 50/ Mesh AC CHAIRS - F Same design as the AC Chairs except with flat bottom legs, for more stability. For castings such as double-tees, manholes and septic tanks. AC05F 15/6-20 5/8 Mesh AC75F 20/6-20 3/4 Mesh AC10F 25/ Mesh AC14F 30/ /4 Mesh AC15F 40/ /2 Mesh AC20F 50/ Mesh AC CHAIRS - K (STACKABLE) For top reinforcement, heavy duty, stackable high chairs. AC20K 2 Mesh AC25K 2-1/2 Mesh AC30K 3 Mesh AC35K 3-1/2 Mesh AC40K 4 Mesh AC45K 4-1/2 Mesh AC50K 5 Mesh AC55K 5-1/2 Mesh AC60K 6 Mesh
7 REBAR SUPPORT STYROFIX - EXTRA Special spacer with sand plate used on soft surfaces and insulation material. Extremely stable design with double coverage. SF15/20 5/8-3/4 M-#5 500 SF25/ /4 M-#5 500 SF40/50 1 1/2-2 M-#5 200 SF50/ /2 M-#5 100 SF60/70 2 1/2-2 3/4 M-#5 100 SF70/80 2 3/4-3 1/4 M-#5 100 SF90/ /2-4 M-#5 100 QTY/BAGS. PRIMAFIX Stable bolster for bottom reinforcement. Low cost, good concrete flow. FT./BOX Primafix 20 3/ BEAM BOLSTER PLASTIC Spacer with unique joints, connects to achieve the length you desire. This spacer provides sturdy support for heavy loads and is conveniently boxed for easy shipping and storage. LENGTH FT./BOX BBP 3/4 3/ BBP BBP / BBP BBP 2-1/4 2-1/ BBP 2-3/4 2-3/ BBP U-FIX SLAB BOLSTER Plastic rod spacer for cost-effective laying of the reinforcement. Reduces labor costs by 90%. Also available without cut outs for laying on soft bases, and insulating material. LF/BDLE LF/PALLET U-Fix 20 3/ U-Fix 20 ISO w/o ct outs 3/ U-Fix U-Fix 25 ISO w/o cut outs U-Fix / U-Fix 30 ISO w/o cut outs 1-1/ U-Fix / U-Fix 40 ISO w/o cut outs 1-1/ U-Fix U-Fix 50 ISO w/o cut outs
8 ACCESSORIES CORNER GUARDS Protects precast concrete parts against damage during transport. Reinforced edges. Side lugs prevent chains, straps and ropes from slipping. Long life. Made from virgin Polyethylene to increase flexibility and withstand colder weather. STRAP WIDTH COGDS PANEL PADS Prevents staining of precast and prestressed concrete units during storage. Scored for even more economical use. ORDER CODE STRAP WIDTH UP TO PPADS Aprox. 2 1/2 x PANEL TIES Stable plastic tie for fixing insulating plates. CONSPACE Triple cover fiber concrete spacer with tying wire. Also available without tying wire. FOR INSULATION THICKNESS UP TO OVERALL LENGTH PTIE 20 3/ PTIE / PTIE /2 3-1/ PTIE PTIE / PTIE PTIE WIDTH Conspace 25 3/4 3/ /4 Conspace / /2 2 PARKING CURB SPACER CHAIR Made of non-corrosive, light weight plastic polymer. The curb spacer chair positions and supports rebar during the casting of parking curbs. All rebars are properly placed in one easy step. 3-1/ /2 ITEM NO. PCC-Chair 1-1/
9 ACCESSORIES THREADED PLASTIC INSERT Simple and economical method for anchoring to concrete. Available in three sizes manufactured from non-corrosive glass fiber reinforced polyamide. T THREAD TYPE UNC INSERT LENGTH (L) BASE DIAMETER (B) TOP DIAMETER (T) TENSION CAPACITY (LBS) QTY. PER CARTON TPI 038 3/8 1-5/8 1 9/16 1, L TPI 050 1/2 2-9/16 1-1/16 11/16 2, TPI 075 3/4 2-3/4 1-1/2 1 3, Note: Tension capacities are based on the material strength of the insert, tested at 70 f with a 3:1 safety factor applied to the ultimate load. Tests were conducted with bolts threaded fully into the insert. Should not be used for lifting. B 68
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" 1 of 10 Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 X-Chairs.. 4 Rod Spacers.. 4 Type-A. 5 Sand
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 Stackable Chair... 5 X-Chairs.. 7 Rod Spacers.. 8
Concrete Product Solutions
Concrete Product Solutions Product Catalog 2014-2015 3 About CONAC CONAC was established in 1985 to provide cost effective materials of the highest quality to manufacturers of precast concrete products.
The Art of Construction and The Design. Direct, rebar chair.
The Art of Construction and The Design Direct, rebar chair. Prefabricated element, made out of a thin steel rebar with plastic tipped legs in order to prevent corrosion of the support area between the
Smarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
POLYLOK / ZABEL PRODUCT BROCHURE v.3
POLYLOK / ZABEL PRODUCT BROCHURE v.3 Heavy Duty Trench Drain (Black, Grey, Green, Tan & Ductile ) 3, 4, 6, 8, 10 & 12 Black & Green Pipe s Flow Gate 12 Polylok & Pipe Adapter Ring x3 / Pan x2 & 24 x2 X-Chairs
SECTION 415 REINFORCING FOR CONCRETE
SECTION 415 REINFORCING FOR CONCRETE Module 5 August 2018 Release 10, Module 5 1 Release 10, August 2018 5-1 415 1 Description Furnish and place steel and fiber reinforced polymer (FRP) reinforcing of
PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS
![PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS](/thumbs/93/113339169.jpg "PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS")
PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS LONG PUN ENTERPRISE PTE LTD SPACER SPECIALIST SDN BHD FORMWORK PRODUCT CATALOGUE PRE-CAST YARDS CATERPILLAR
Interior Hangers. Application
Application Interior bridge deck hangers are typically fabricated using two heavy duty sheet metal end clips that have been electrically resistance welded to an appropriate sized wire or formed metal connecting
Contact Tel No : Fax No: Add:
Contact Tel No : +974 40053333 Fax No: +974 40059902 Email Add: info@castle-mba.com www.castlemba.com 0 Clip Spacer (MC) Product Code Item Description Concrete Cover (mm) For Steel Bar Diameter (mm) Packing
CONCRETE ACCESSORIES. Formwork Accessories FORMWORK
CONCRETE CCESSORIES Formwork ccessories 69 MGNETS K SERIES The K Series magnet is machined from solid material and fitted with high performance magnets, providing a high power system for securing DR nchors.
CONCRETE ACCESSORIES
CONCRETE CCESSORIES Formwork ccessories 74 MGNETS K SERIES The K Series magnet is machined from solid material and fitted with high performance magnets, providing a high power system for securing DR nchors.
Miller Collective Safety at Height Solutions EPIC ULTRA Barrier System EPIC Post-N-Barrier System EPIC Basic Barrier System
For over 65 years the Miller brand has been synonymous with personal fall protection products and services. As the global leader in safety at height solutions, Honeywell Safety Products introduces a new
Since it was established in 1989, with a small manufacturing base in Qwa Qwa, Uni-Span has grown to become one
access scaffolding Since it was established in 1989, with a small manufacturing base in Qwa Qwa, Uni-Span has grown to become one of the major players in the scaffolding and formwork industry in South
UNIVERSITY OF MISSOURI Electrical Manholes and Handholes 2016 Q1
GENERAL: The scope of this document is to provide instruction for the design and installation of medium voltage concrete electric manholes and handholes. DESIGN GUIDELINES: 1. Design for Manhole 1.1. The
INSTALLATION CHECKLIST 2 ND EDITION. Fox Blocks Abbott Drive Omaha, NE
Fox Blocks INSTALLATION CHECKLIST ND EDITION Fox Blocks Installation Checklist: ND Edition 6110 Abbott Drive Omaha, NE 6110-69-6 WWW.FOXBLOCKS.COM INSTALLATION CHECKLISTS The Checklists on the following
Table of contents Our products We are offering three product groups: Quality and Service Our product groups Basic products-panels EURO, Light Version, Compensatory, Round Top Gates and Pedestrian Gates
TILT-UP PRECAST CONCRETE SANDWICH PANELS. A. Work includes, but is not limited to, the following:
PART 1 GENERAL 1.01 SUMMARY SECTION 03460 TILT-UP PRECAST CONCRETE SANDWICH PANELS A. Work includes, but is not limited to, the following: 1. Architectural precast concrete sandwich wall panels. 2. Integral
18. Wall rebar arrangement
18. Wall rebar arrangement 1) Sequence of rebar arrangement The worker is not allowed to change the rules and instructions of reinforcement without permission. All the reinforcement should be in accordance
CANADIAN MANUFACTURED PALLET RACKING OUR STRENGTH IS OUR PRODUCT ROLLFORMED RACK
NORTH AMERICAN STEEL CANADIAN MANUFACTURED PALLET RACKING OUR STRENGTH IS OUR PRODUCT ROLLFORMED RACK www.northamericansteel.ca RACK ASSEMBLY Drum Drum Cradle Banker Boxes Fork Entry Bar Skid Channel Roof
Rapid Clamp EUROBUYSERVICES EBS
Rapid Clamp Forming System EUROBUYSERVICES EBS System Design The Symons Rapid Clamp system is a highstrength concrete forming system designed for fast-paced gangform operations. Panels and fillers This
A. Prepare formwork shop drawings using qualified professional engineer. Include detail of fabrication, assembly, and support of formwork.
DIVISION 03 CONCRETE 03 0100 MAINTENANCE OF CONCRETE 03 0505 UNDER SLAB VAPOR BARRIER A. Sheet vapor retarder shall be polyethylene sheet, ASTM D 4397, 10 mils thick minimum. Consult with Facilities Management
CONSULTANT PROCEDURES & DESIGN GUIDELINES Electrical Manholes and Handholes UNIVERSITY OF MISSOURI
GENERAL: The scope of this document is to provide instruction for the installation of concrete electric manholes. DESIGN GUIDELINES: 1. Materials for Manhole 1.1. Cast-in-Place or Pre-Cast concrete may
5.0 NUDURA PRODUCTS ON SITE STORAGE PACKAGING, UNIT ASSEMBLY, USAGE
5.0 NUDURA PRODUCTS ON SITE STORAGE PACKAGING, UNIT ASSEMBLY, USAGE NUDURA Inc. has one of the most complete lineups of products and accessories available today in the construction industry. NUDURA s Integrated
E U G REUSS-SEIFERT GMBH
CATALOGUE A warm welcome! Dear partners, We have restructured our updated product catalogue in line with your needs to ensure that you can find your way around even more easily. From now on, you will be
Wind Power Solutions. Company Registration No: Vat Registration No.:
Wind Power Solutions Foundation Grounding and Construction, Bonding, Power Connections, Surge Protection, and Lightning Protection ERICO offers a complete range of foundation grounding and construction,
SECTION TILT-UP PRECAST CONCRETE SANDWICH PANELS. A. Work includes, but is not limited to, the following:
PART 1 GENERAL 1.01 SUMMARY SECTION 03460 TILT-UP PRECAST CONCRETE SANDWICH PANELS A. Work includes, but is not limited to, the following: 1. Architectural precast concrete sandwich wall panels. 2. Integral
Walco Equipment has grown into a successful Canadian manufacturing & distribution Company.
WALCO CARGO CONTROL COMPONENTS WINCHES H.D. Small Frame ------Page 1 Portable-----------------Page 1 Loose Frame -----------Page 1 Weld-on ----------------Page 1 Low Profile -------------Page 2 Three Bar
Heartland Perma-Column 1841 E 1450 Rd. Lawrence, KS (785)
Perma-Column Installation Instructions Unlike any other concrete post-frame foundation system, Perma-Column Precast Concrete Piers use 10,000 psi concrete and our unique Sturdi-Wall Plus wet-set bracket
1.02 RELATED WORK: Refer to the following sections for related work:
SECTION 4200 - CONCRETE STRUCTURES PART 1 - GENERAL 1.01 SCOPE: This Section covers installation of header curb, retaining walls, energy dissipation structures for drainage channels, reinforced concrete
Polycrete Big Block Standard Specification
Polycrete Big Block Standard Specification SECTION 03 11 19 INSULATED CONCRETE FORMING 10/13 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent
SECTION ALUMINUM HANDRAIL SYSTEMS
SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American
NORTH AMERICAN STEEL INNOVATIVE STORAGE SOLUTIONS OUR S T R E N G T H IS OUR PEOPLE AMERICAN TEARDROP RACK
NORTH AMERICAN STEEL INNOVATIVE STORAGE SOLUTIONS OUR S T R E N G T H IS OUR PEOPLE AMERICAN TEARDROP RACK AMERICAN TEARDROP American Teardrop racking (with its 2 adjustable and tapered locking connection)
Lifting Sockets. Flat Lifting Sockets
Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer
PS 3000 Installation Manual Step-By-Step Procedures C.9. DOOR AND WINDOW OPENINGS C.9.1 PREPARE IN ADVANCE. C.9.2 VBUCK CONSTRUCTION.
C.9. DOOR AND WINDOW OPENINGS Openings for doors and windows are formed with bucks, or frames, which are constructed to the rough opening dimensions required for the doors and windows to be installed.
DOOR AND WINDOW OPENINGS PREPARE IN ADVANCE VBUCK CONSTRUCTION
DOOR AND WINDOW OPENINGS Openings for doors and windows are formed with bucks, or frames, which are constructed to the rough opening dimensions required for the doors and windows to be installed. These
BROCHURE. Steel Forming System. A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. DAYTONSUPERIOR.
Max-A-Form Steel Forming System BROCHURE A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. DAYTONSUPERIOR.COM Max-A-Form System Design The Max-A-Form Forming
INSTALLATION MANUAL KOCH
INSTALLATION MANUAL KOCH TECHNICAL SYSTEMS GROUP PRE-FAB ACOUSTICAL/THERMAL PANELS AND ENCLOSURES GEORGE KOCH SONS, LLC TECHNICAL SYSTEMS GROUP 10 South Eleventh Avenue Evansville, Indiana 47744 812-465-9600
Facility Sanitary Sewers
University of New Hampshire University of New Hampshire Scholars' Repository Division 22 Plumbing Chapter 5 Technical Construction and Renovation Standards 4-23-2015 221313 - Facility Sanitary Sewers Sandra
Sealing products. The new Generation of sealing-products
Sealing products The new Generation of sealing-products Product Overview Product wolfseal KB 16 Application wolfseal KB 16.7 can be installed in construction joints of all types in concrete units up to
Requirements for Measuring and Pricing of Structural Concrete
Requirements for Measuring and Pricing of Structural Concrete October 2016 TRANSPORT INFRASTRUCTURE IRELAND (TII) PUBLICATIONS About TII Transport Infrastructure Ireland (TII) is responsible for managing
CONCRETE BLOCK MASONRY
CONCRETE BLOCK MASONRY CONTENT Introduction Types Manufacturing process Properties Advantages Introduction These are the concrete blocks either hollow or solid. A hollow unit is that unit which has core
Wall Panels. Structural wall panel. Architectural wall panel. Cladding wall panel. Sandwich wall panel
Wall Panels Structural wall panel Architectural wall panel Cladding wall panel Sandwich wall panel Wall Panels Assorted styles and colours Reveals and other patterns Painted finish Bolted, welded and knife
Important: Before You Start
Advantage ICF System Advantage ICF System TM Field Guide Important: Before You Start Does Your Building Inspector Know You Are Building with the Advantage ICF System? You are required to check with your
Construction Red Flags. April 17, 2018 William (Clay) Herndon, P.E.
Construction Red Flags April 17, 2018 William (Clay) Herndon, P.E. 1 General Site Management & Safety Site Safety Site Specific PPE Hard Hat, Safety Glass, Vest What does the Contractor provide? Safe working
1. Cast-in-place concrete is specified in Section
SECTION 03 38 00 PART 1 - GENERAL 1.01 DESCRIPTION A. This Section describes the requirements for furnishing and installing post-tensioned slabs, jacks, jacking and anchors at Parking Structure, and record
R-Group Finland Oy. REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 10.2.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
UTILUX CABLE MANAGEMENT
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/ documentaty style or portrait of engineer. UTILUX CABLE
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required
PFEIFER Lifting Anchors: The original as standard for quality and a maximum of safety.
PFEIFER Lifting Anchors: The original as standard for quality and a maximum of safety. 16 PFEIFER Round Thread Exceptionally robust thread even no chance for hammer blows Not sensitive against dirt enables
Frequently Asked Questions
Frequently Asked Questions Q1: What is a temporary horizontal lifeline system? A1: A temporary horizontal lifeline (HLL) system is a fall protection anchorage system designed to attach to a suitable anchor.
SPECIFICATION & DESIGN MANUAL " AISI 1060 to 1065 Rockwell Hardness 51 to 55 Perma-Seal coated Stick-E Pin 3/4" (Step Shank) 1"
Trak-It /Stick-E TM SPECIFICATION & DESIGN MANUAL TM Stick-E Electrical and Mechanical Fastening System PRODUCT DESCRIPTION The Stick-E fastening system uses Trak-It gas technology with specially designed
Rak Production Technology of Concrete Structures (2015) Concrete Reinforcement
Rak-82-2121 Production Technology of Concrete Structures (2015) Concrete Reinforcement 09.10.2015 1 Learning Outcomes To acquaint the student with concrete reinforcement 2 Reinforcement The of concrete
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY DISTRIBUTION ENGINEERING DISTRIBUTION EQUIPMENT
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY 10003 DISTRIBUTION ENGINEERING DISTRIBUTION EQUIPMENT SPECIFICATION EO-1124 REVISION 3 November 2013 EFFECTIVE DATE November 11,
SUPPORT AND ANCHORS SECTION 15090
SUPPORT AND ANCHORS SECTION 15090 PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. Work included in this Section: Materials, equipment, fabrication, installation and tests in conformity with applicable codes
SECTION COMPOSITE EXTERIOR SHUTTERS AND ACCESSORIES
SECTION 10712 COMPOSITE EXTERIOR SHUTTERS AND ACCESSORIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Functional exterior shutters. B. Exterior shutter hardware. 1.2 RELATED SECTIONS A. Section 09900 - Paints
TECHNICAL EVALUATION REPORT No. 27/2008/2060
TECHNICAL EVALUATION REPORT No. 27/2008/2060 Sheet 1 of 16 Sheets This report is a correct record of the measurements and observations made. The report is intended for the private information of those
INDEX. introduction 4. access scaffolding 5. selflock system 16. wall system 17. column boxes 29. slab system 31. props 36. contact details 40
PRODUCT BROCHURE INDEX introduction 4 access scaffolding 5 selflock system 16 wall system 17 column boxes 29 slab system 31 props 36 contact details 40 INTRODUCTION Augusta Manufacturing was established
Inverted Double T BEAMS and SLABS Applications
NORDIMPIANTI P R O D U C T S APPLICATIONS T U R N K E Y S E R V I C E G L O B A L Inverted Double T BEAMS and SLABS Applications Inverted Double T Beams U Panels Inverted Double T Slabs Inverted Triple
PHYSICAL BARRIERS MACHINE GUARDS ROBOTIC WORK CELLS PERIMETER OR AREAS GUARDS PHYSICAL BARRIERS
PHYSICAL BARRIERS MACHINE GUARDS ROBOTIC WORK CELLS PERIMETER OR AREAS GUARDS PHYSICAL BARRIERS Quick-Ship Ships in 48 Hours The 6-2 Guard System Our barriers are a reliable, versatile, and economical
LITHOCRETE ARCHITECTURAL CONCRETE PAVING
LITHOCRETE ARCHITECTURAL CONCRETE PAVING PART 1 GENERAL 1.1 GENERAL CONDITIONS A. Requirements of "General Conditions of the Contract" and of Division 1, "General Requirements," apply to work in this Section
1. Structural Steel Sections Structural steel sections can be classified into various groups according to their shapes.
1 Structural Steelwork 1. Structural Steel Sections Structural steel sections can be classified into various groups according to their shapes. A steel section is designated by the serial size in millimeters
High Performance Insulating Concrete Form
Insulating Concrete Form High Performance Insulating Concrete Form The Best Way to Build! liteform.com FlexxBlock Insulating Concrete Forms PROVIDE sustainable, energy efficient building envelopes. LiteForm
Tilt-Up 3 Lifting System
TILT-UP 3 LIFTING SYSTEM The Dayton Superior Tilt-Up 3 is a quality high strength, economical method for lifting, handling and placing concrete tilt-up wall panels. The System features hardware applicable
FENCE STUNNING BEAUTY LIFETIME DURABILITY. (800)
FENCE STUNNING BEAUTY LIFETIME DURABILITY www.discountfence.com (800) 878-7829 sales@discountfence.com WE CREATE BEAUTIFUL YARDS SimTek decorative walls offer elegance, privacy, and security for your yard.
1:100 GABION WALLS LEGEND NOT FOR CONSTRUCTION TYPICAL DRAWING TEXT SETTING TYPE CHARACTER HEIGHT PEN SETUP FOR PLOTTING SUBTITLE
LEGEND SHEET 0 BATTERED WALLS - TYPICAL SECTIONS AND CONSTRUCTION S VERTICAL WALLS - TYPICAL SECTIONS AND CONSTRUCTION S AND CONSTRUCTION S SHEET 02 SHEET 0 SHEET 04 RETAINING STRUCTURES WITH CUT OFF WALLS
1. Include plans, elevations, sections, details, and attachments to other work.
SECTION 102213- PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
Rack Guard Safety. Industrial. InCord incord.com
Industrial ack Guard Safety Our Sure-gard industrial rack guard systems are ideal for single racks and gravity-flow racks in any type of warehouse, distribution center, or manufacturing environment. They
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Multifunction Rolling Scaffold Towers 6, 12 and 18 READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides
CONSTRUCTION PRODUCTS PRICE LIST
Andy Wyatt, Products Manager Office (615) 255-1900 Mobile (615) 394-3610 CONSTRUCTION PRODUCTS PRICE LIST We are pleased to quote the following prices: 1) Concrete Reinforcement and Form Materials Rebar
TECHNICAL MANUAL. PC Beam Shoe. Hidden Beam Shoe for Corbel System
TECHNICAL MANUAL PC Beam Shoe Hidden Beam Shoe for Corbel System Version: PEIKKO GROUP 03/2012 PC Beam Shoe Corbel system to support beams System benefits Easy and fast beam installationtion Fits into
R-Group Finland Oy. RLA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy RLA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 16.8.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
Q Line Shelving Bulk Storage Shelving Heavy Duty Reinforced Shelving
Q Line Shelving Bulk Storage Shelving Heavy Duty Reinforced Shelving SYSTEMS FOR SUCCESS Q Line Shelving Q Line Shelving is designed for those storage applications that demand strength and versatility.
1 Exam Prep Placing Reinforcing Bars Tabs and Highlights
1 Exam Prep Placing Reinforcing Bars Tabs and s These 1 Exam Prep Tabs are based on the CRSI Placing Reinforcing Bars Recommended Practices, 9 th Edition. Each 1 Exam Prep tabs sheet has five rows of tabs.
INDUSTRIAL GUARDRAIL SYSTEMS
INDUSTRIAL GUARDRAIL SYSTEMS STRONGEST GUARDRAIL ON THE MARKET MANUFACTURED IN THE U.S.A. BEST PRICES MOST VARIETIES HEAVY DUTY ONE-LINE OR TWO-LINE Posts: 4 Sched 80 pipe Rail: 6 Sched 40 pipe Sleeved
R-Group Finland Oy. RTA, RWTL and RWTS Lifting anchors Design instructions
R-Group Finland Oy RTA, RWTL and RWTS Lifting anchors Design instructions According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 28.12.2016 2 Table of contents 1 DESCRIPTION
axis design New Range 2004 Design and performance HAUTE CLOTURE FRANÇAISE
axis design Design and performance New Range 2004 HAUTE CLOTURE FRANÇAISE axis design The fencing system for all requirements. Panel and post : quick and efficient The AXIS SYSTEM comprising of a welded
Delivering Reliability. Electrical Vaults. Power & Energy-Underground Structures
A Delivering Reliability Electrical Vaults Power & Energy-Underground Structures A The Benefits of Precast Vaults Electrical vaults house power cables and transformers, and are a preferred alternative
1. Hangers and supports for electrical equipment and systems.
PART 1 - GENERAL... 1 1.1 RELATED DOCUMENTS... 1 1.2 SUMMARY... 1 1.3 DEFINITIONS... 1 1.4 PERFORMANCE REQUIREMENTS... 1 1.5 SUBMITTALS... 2 1.6 QUALITY ASSURANCE... 2 1.7 COORDINATION... 2 PART 2 - PRODUCTS...
Steel Forming System BROCHURE. A durable, all-steel forming system that is ideal for pier caps and self-spanning applications.
Max-A-Form Steel Forming System BROCHURE A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. Max-A-Form System Design The Max-A-Form Forming System combines
For Anchors, Frame Ties, Steel Piers, & LLBS Support Systems
For Anchors, Frame Ties, Steel Piers, & LLBS Support Systems Installation... 1 Strap Tensioner... 1 Stabilizer... 2 Frame Tie to Anchor... 2 Frame Tie Instructions... 3 Locking Frame Clamp II... 3 EZ
SECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
Nortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1
16 May 2014 Page 1 PART 1 GENERAL 1.1 DESCRIPTION This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
The Kodiak 3200 Seating System by Royal Stewart Ltd.:
The Kodiak 3200 Seating System by Royal Stewart Ltd.: PART 1 GENERAL 1.01 Summary A. Bleacher System shall be Series 3200 Platforms as manufactured by Royal Stewart Ltd., Winnipeg, Manitoba, in accordance
D-1 THE CITY OF HARRISBURG 1 1/2" MIN. ID-2 WEARING COARSE EXISTING STREET SURFACE AC-20 SEALER (ALL AROUND) 1 1/2" MIN. ID-2 BINDER COARSE
EXISTING STREET SURFACE 1 1/2" MIN. ID-2 BINDER COARSE 1 1/2" MIN. ID-2 WEARING COARSE AC-20 SEALER (ALL AROUND) 8" CLASS A P.C. CONCRETE SAW CUT TOP OF CONCRETE SHALL MEET SURFACE OF EXISTING CONCRETE.
Block D- Reinforcing
Iron worker IP Red Seal Practice Exam Block D- Reinforcing 1. What type of bar support would you use in a beam a. SB b. HC c. CB d. BB 2. How many classes of bar support are there? a. 3 b. 4 c. 5 d. 6
TRANSPORT and LIFTING spherical head anchors
Technical specification head anchors The best way of calculating the lifting anchors is step by step. The following steps are in the correct sequence: Determine the weight of the element. (concrete : +/-
Strengthened Soil Wall Construction Manual
Strengthened Soil Wall Construction Manual This information has been prepared by Shaw Technologies, Inc. as an aid in constructing their Strengthened Soil Wall system. Final determination of the suitability
Aluminum Beam Gang System
Aluminum Beam Gang Aluminum Beam Gang System Symons Aluminum Beam Gang Forming System offers computer-optimized aluminum beams with an extremely high strength-toweight ratio. The unique beam attachment
For Anchors, Frame Ties, Steel Piers, & LLBS Support Systems
For Anchors, Frame Ties, Steel Piers, & LLBS Support Systems Installation... 1 Strap Tensioner... 1 Stabilizer... 2 Frame Tie to Anchor... 2 Frame Tie Instructions... 3 Locking Frame Clamp II... 3 EZ
SECTION CONCRETE FORMWORK
SECTION 03100 CONCRETE FORMWORK PART 1 GENERAL 1.1 REFERENCES A. The following is a list of standards which may be referenced in this section: 1. American Concrete Institute (ACI): a. 117, Standard Specifications
Drainage, Road Drainage and Collection Pit A - EXCAVATION:
57 Drainage, Road Drainage and Collection Pit SCHEDULE OF QUANTITY Sl.N o. 1 Particulars Qty Unit Rate Amount A - EXCAVATION: Earth work in EXCAVATION IN FOUNDATION TRENCHES IN ALL KIND OF SOIL including
Installation Instructions
Installation Instructions Dynarail Safety Ladder System Corrosion Resistant Nonconductive Fire Retardant High Strength-To-Weight Ratio Long, Low Maintenance Life Meets OSHA, BOCA & Other Building Code
PECAFIL APPLICATION PRODUCT DESCRIPTION ADVANTAGES SITE SAFETY BENEFITS SIZES
PRODUCT DESCRIPTION The form work of the future is here now! The innovative solution to conventional formwork is the result of many years of intensive research and development overseas. The basic material
Special Provision No. 109S17 June 2017
AMENDMENT TO OPSS 905, NOVEMBER 2014 Special Provision No. 109S17 June 2017 OPSS 905, November 2014 Construction Specification for Steel Reinforcement for Concrete is deleted in its entirety and replaced
Alisply Walls. Product brochure
Alisply Walls Product brochure Encofrados J. Alsina S.A. Pol. Ind. Pla d en Coll Camí de la Font Freda, 1 08110 Montcada i Reixac (Barcelona - Spain) Tel.: (+34) 935 753 000 Fax: (+34) 935 647 059 E-mail:
Rosette Modular Scaffolding System
Rosette Modular Scaffolding System The rosette modular security scaffolding system to be used in facades, has been produced in accordance with the structural design conditions stated by the following applicable
ALL-IN-ONE THERMAL FLOOR SYSTEM NON STRUCTURAL TOPPING (NST)
ALL-IN-ONE THERMAL FLOOR SYSTEM NON STRUCTURAL TOPPING (NST) Jablite All-in-One Thermal Floor System Non Structural Topping (NST) is an innovation-update on the patented Jablite All-in-One Thermal Floor
NEMO TANK INSTALLATION GUIDE INSTALLATION INSTRUCTIONS FOR THE NEMO TANK STAGE
NEMO TANK INSTALLATION GUIDE INSTALLATION INSTRUCTIONS FOR THE NEMO TANK STAGE 1. Before undertaking the work 2. Receiving the materials 3. Handling and storage 4. Tank layout 5. Installing the tanks STAGE
SPECIFICATION FOR REINFORCED SOIL WALL
SPECIFICATION FOR REINFORCED SOIL WALL 1.0 EXTENT OF WORK The work shall consist of Reinforced Soil walls built in accordance with this specification and in conformity with the lines, levels and details