TERWA REBAR CONNECTION COUPLERS

Size: px
Start display at page:

Download "TERWA REBAR CONNECTION COUPLERS"

Transcription

1 TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B

2 Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger than the associated rebar, sometimes referred to as a Bar Break connection) allowing a safe, reliable and efficient method of providing continuity of reinforcement through stop ends and element intersections. The adoption of a metric parallel thread on an enlarged bar diameter provides sufficient cross sectional area of material at the joint to outweigh the tensile capabilities of the equivalent diameter reinforcing bar. This attribute means the performance of the coupling at the joint can be ignored in any structural assessment, in turn this makes the adoption of the Terwa couplers over the standard detailed bars a simple exchange. The Terwa Parallel Threaded Coupler System has a full CARES Technical approval, this not only verifies the performance of the system in accordance with BS8110 and EC2 it also provides confidence that the components are manufactured and assembled in a fully audited ISO9001 facility. The female coupler (PSA) is supplied to the customer ready assembled on the reinforcing bar, the length of the bar is generally supplied as a full tension lap length in accordance with EC2, however, where the couplers are being used as a means of removing splicing laps the bars can be manufactured with any available and transportable length of reinforcing bar. There is no requirement for any threading of the corresponding male bars (TSE) as these are supplied prefabricated with the corresponding metric parallel thread. There are no specialist tools required to complete the connection, this can be carried out using a simple open jawed pipe wrench. We can supply a calibrated wrench to ensure the correct torque settings are achieved. Benefits 1 Full CARES Technical Approval. Simplifies shutter design. Reduces damage to formwork. Makes stripping shuttering system easier. Ideal for use in continuous pour processes and jump shutters. Eliminates the need for dangerous projecting reinforcement. No drilling of shuttering materials. Reduces the congestion of rebar at laps. Lack of congestion facilitates easier concrete placement, reducing the risk of voids. No post drilling of concrete in order to expoxy resin fix continuity bars. Provides a full bar strength coupling. Connection made utilising standard metric threads. Accelerates the production process. No requirement for thread cutting or assembling of products. Full tension lap bar lengths available from stock. Fabricated components can be bolted directly to the structure using standard metric threads. No specialist tools required. Increasing the diameter of the bar to cut the male thread. Swaging the female threaded sleeve onto the reinforcement steel.

3 Applications Stop ends. Stair landings. Cantilevered slabs. Vertical connections in columns. Column head connections. Wall intersections. Temporary openings in water retaining structures. Crane voids through slabs. Fixing points for additional steel structures and components. Provides reinforcement connections for future developments that may tie into the existing structure. Manufactured by Terwa, PSA,TSE and PSC mechanical couplers have achieved accreditations as follows. TECHNICAL APPROVAL 50 TERWA Mobile Unit Can be placed on site to produce on site rebar connections. Any rebar length can be coupled. Utilises locally sourced reinforcement steel. Tested and certified accordance with domestic and international norms. KOMO EC Declaration of Conformity FS

4 PSA Female Couplers Supplied as a straight reinforcement bar with sleeved and swaged female coupler body. Generally used in the first pour to allow subsequent addition of male continuity bar in the second pour. Can also be used in conjunction with nailing plates or threaded inserts to ease fixings to shutters. Standard Stock Sizes Product Code Length Thread L M (Metric) A D Coupler L1 d Reinforcement Steel Tensile Force (kn) Rated Section (mm 2 ) PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA This is the cast in part of the system, it comprises a socket swaged onto a high yield reinforcement bar. The socket area is larger than the bar ensuring that the bar itself is the weakest part of the coupler. Also available in Stainless Steel. 3

5 TSE Male Couplers Supplied as a straight male reinforcement bar, the threaded portion of the TSE is threaded into the exposed female section of the PSA once the shuttering has been removed. This provides the continuity reinforcement for the second pour. Standard Stock Sizes Product Code Length Thread L M (Metric) A d Reinforcement Steel Tensile Force (kn) Rated Section (mm 2 ) TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE Use PSA + PSC Connector for 40mm diameter reinforcement.(see next page) This is the screw in coupler. It has an enlarged threaded end to maximize the bar strength. 4

6 PSC Threaded Connector PSC threaded connector is used for converting PSA couplers into males couplers. Product Code Description Thread M (Metric) Lb Coupler Range Type Thread PSC016 PSC Bolt PSA M16 PSC020 PSC Bolt PSA M20 PSC024 PSC Bolt PSA M24 PSC030 PSC Bolt PSA M30 PSC042 PSC Bolt PSA M42 PSC048 PSC Bolt PSA M48 Instructions Place in and rotate the threaded PSC Bolt into the PSA Coupler already cast into the concrete. Mount the second PSA Coupler E P Rotate by hand the second PSA Coupler until the couplers are fastened together. The connection is finished by using a special torque wrench made by Terwa, to tighten the connection. The necessary torque for each type of rebar is shown in the table below. Reinforcement dia. Thread (M) Torque (Nm) TERWA Wrench (available on request) Product Code PSAWR Description Wrench 5

7 Cutting and Bending Service Wecan also of fer a Cutting & Bending service for the Terwa Coupler System. The production process is automated through the use of specialised machinery to enable high volume production. Benefits No bending required on site. Eliminates manual handling risks. No site wastage. Quick delivery times. Bent bars from 10mm up to 40mm. Examples PSAB1 TSEB1 PSAB2 TSEB2 PSAB3 TSEB3 * Please specify dimensions required M, d, LA, LB and DB. **Please specify angle of bend. 6

TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B

TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B www.euroacc.co.uk Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger

More information

CARES Technical Approval Report TA1-B 5058

CARES Technical Approval Report TA1-B 5058 CARES Technical Approval Report TA1-B 5058 Issue 3 Terwa PSA/TSE and PSA/PSC Standard couplers Assessment of the Terwa PSA/TSE and PSA/PSC Standard Coupler Product and Quality System for Production 5058

More information

CARES Technical Approval Report TA1-B 5040

CARES Technical Approval Report TA1-B 5040 CARES Technical Approval Report TA1-B 5040 Terwa PSA/TSE and PSA/PSE Standard couplers Assessment of the Terwa PSA/TSE and PSA/PSE Standard Coupler Product and Quality System for Production 5040 Product

More information

CI/SfB (29) Et6. October Starter Bar System for the Construction Industry

CI/SfB (29) Et6. October Starter Bar System for the Construction Industry CI/SfB (29) Et6 October 2007 Starter Bar System for the Construction Industry 2 ncon designs and manufactures high integrity steel products for the construction industry. Through continuous programmes

More information

TECHNICAL MANUAL. MODIX Rebar Coupler Safe and Flexible Rebar Coupling System

TECHNICAL MANUAL. MODIX Rebar Coupler Safe and Flexible Rebar Coupling System TECHNICAL MANUAL MODIX Rebar Coupler Safe and Flexible Rebar Coupling System Version: PEIKKO GROUP 01/2016 MODIX Rebar Couplers Safe and flexible rebar splicing system Reduces congestion of reinforcement

More information

BUILDING STRENGTH TAPER-LOCK REBAR THREADING SYSTEM CONCRETE CONSTRUCTION SOLUTIONS BROCHURE

BUILDING STRENGTH TAPER-LOCK REBAR THREADING SYSTEM CONCRETE CONSTRUCTION SOLUTIONS BROCHURE BUILDING STRENGTH TPER-LOCK REBR THREDING SYSTEM CONCRETE CONSTRUCTION SOLUTIONS BROCHURE Taper-Lock Threading Machines The Next Generation of Rebar Threading Technology The Taper Lock Threading Machines

More information

PERFORM WITH PRECISION TAPER-LOCK REBAR THREADING SYSTEM CONCRETE CONSTRUCTION SOLUTIONS BROCHURE

PERFORM WITH PRECISION TAPER-LOCK REBAR THREADING SYSTEM CONCRETE CONSTRUCTION SOLUTIONS BROCHURE TPER-LOCK REBR THREDING SYSTEM PERFORM WITH PRECISION CONCRETE CONSTRUCTION SOLUTIONS BROCHURE Taper-Lock Threading Machines The Next Generation of Rebar Threading Technology The Taper Lock Threading Machines

More information

TAPER THREADED GRIP-TWIST

TAPER THREADED GRIP-TWIST TAPER THREADED GRIP-TWIST And Position Couplers MECHANICAL SPLICES FOR REINFORCED CONCRETE CONSTRUCTION PROJECTS Technical Data and Performance Review JULY 2003 BarSplice Products, Inc., 4900 Webster Street,

More information

CARES Technical Approval Report TA1-B 5061

CARES Technical Approval Report TA1-B 5061 CARES Technical Approval Report TA1-B 5061 Issue 1 B U I L D I N G P R O D U C T S Ancon KSN Anchors for Reinforcing Steel Assessment of the Ancon KSN Anchor Product and Quality System for Production 5061

More information

Contents. Company description. Company description 1 Product description 2 Reinforcement rebar Couplers 3

Contents. Company description. Company description 1 Product description 2 Reinforcement rebar Couplers 3 C A T A L O G U E Contents Company description 1 Product description 2 Reinforcement rebar Couplers 3 Features 4 Bartek Systems Coupler Dimensions 4 BARTEK SYSTEMS P Parallel rib peeling direct rolling

More information

HIGH PERFORMANCE REINFORCEMENT PRODUCTS. Product Catalogue.

HIGH PERFORMANCE REINFORCEMENT PRODUCTS. Product Catalogue. HIGH PERFORMANCE REINFORCEMENT PRODUCTS Product Catalogue www.hrc-europe.com HRC and its product philosophy The use of T-headed bars in concrete structures has some remarkable benefits compared to the

More information

CARES Technical Approval Report TA1C

CARES Technical Approval Report TA1C CARES Technical Approval Report TA1C - 5003 Issue 3 January 2010 ERICO LENTON Mechanical Rebar Splicing System Assessment of the ERICO LENTON Taper Threaded Coupler Product, Sellafield Ltd type B Couplers

More information

Mechanical Rebar Splice Solutions

Mechanical Rebar Splice Solutions Mechanical Rebar Splice Solutions About BARUS LLC Why a Mechanical Splice? BARUS Product range SimGrip Upset Parallel System SimGrip System Equipments SimGrip Standart SimGrip LT SimGrip PS SimGrip Crossing

More information

International Version CI/SfB (29) Et6. June CXL Parallel Thread Couplers for the Construction Industry

International Version CI/SfB (29) Et6. June CXL Parallel Thread Couplers for the Construction Industry International Version CI/SfB (29) Et6 June 2015 CXL Parallel Thread Couplers for the Construction Industry Reinforcing Bar Couplers Lapped joints are not always an appropriate means of connecting reinforcing

More information

CARES Technical Approval Report TA1-B 5065

CARES Technical Approval Report TA1-B 5065 CARES Technical Approval Report TA1-B 5065 Issue 1 Terwa Alligator (ALC) Mechanical Coupler Assessment of the Terwa Alligator (ALC) Mechanical Coupler Product and Quality System for Production 5065 Product

More information

Smarter. Safer. Leaner.

Smarter. Safer. Leaner. Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter

More information

Originally Issued: 04/18/2014 Revised: 05/02/2018 Valid Through: 04/30/2019

Originally Issued: 04/18/2014 Revised: 05/02/2018 Valid Through: 04/30/2019 DAYTON SUPERIOR CORPORATION MECHANICAL SPLICE SYSTEMS FOR STEEL REINFORCING BARS: BAR-LOCK TAPER-LOCK DB/DI CSI Section: 03 21 00 Reinforcing Steel 1.0 RECOGNITION The Dayton Superior Mechanical Splice

More information

American Metal Specialties, Inc.

American Metal Specialties, Inc. American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best

More information

CARES Technical Approval Report TA1-B 5054

CARES Technical Approval Report TA1-B 5054 CARES Technical Approval Report TA1-B 5054 Issue 1 Shanxi Taigang Stainless Steel Standard Couplers Assessment of the Shanxi Taigang Stainless Steel Standard Coupler Product and Quality System for Production

More information

SDG Euro Starter Packs type RSH meet the demands of a key profiled joint according to EC 2 (Eurocode 2: Design of Concrete Structures).

SDG Euro Starter Packs type RSH meet the demands of a key profiled joint according to EC 2 (Eurocode 2: Design of Concrete Structures). Euro Starter Pack Description SDG Euro Starter Packs consist of pre-bent reinforcement housed in a uniquely trapezoidal profiled corrosion resistant casing. The starter pack is then cast into the front

More information

Features Advantages Benefits

Features Advantages Benefits What is BoxBolt? A KEE SAFETY PRODUCT BoxBolt Guide - Eurocode 3 / DIN 18800 BOXBOLT is a fully tested and approved blind fixing solution for connecting to hollow section steelwork or where access is restricted

More information

CARES Technical Approval Report TA1-B&C 5039

CARES Technical Approval Report TA1-B&C 5039 CARES Technical Approval Report TA1-B&C 5039 Issue 3 Armaturis Herisson Plus Standard and Positional Couplers Assessment of the Armaturis Herisson Plus Standard and Positional Couplers Product and Quality

More information

Miller Collective Safety at Height Solutions EPIC ULTRA Barrier System EPIC Post-N-Barrier System EPIC Basic Barrier System

Miller Collective Safety at Height Solutions EPIC ULTRA Barrier System EPIC Post-N-Barrier System EPIC Basic Barrier System For over 65 years the Miller brand has been synonymous with personal fall protection products and services. As the global leader in safety at height solutions, Honeywell Safety Products introduces a new

More information

TECHNICAL MANUAL. HPKM Column Shoe Reliable Bolted Column Connections. Version: PEIKKO GROUP ACI-M 01/2017 Designed according to ACI 318M-11

TECHNICAL MANUAL. HPKM Column Shoe Reliable Bolted Column Connections. Version: PEIKKO GROUP ACI-M 01/2017 Designed according to ACI 318M-11 TECHNICAL MANUAL Column Shoe Reliable Bolted Column Connections Version: PEIKKO GROUP -M 01/2017 Designed according to 318M-11 Column Shoe For bolted column connections Full-Scale tested & approved connection

More information

R-STEEL. RPK-N2, RPK-E2 Column shoes USER GUIDE

R-STEEL. RPK-N2, RPK-E2 Column shoes USER GUIDE R-STEEL RPK-N2, RPK-E2 Column shoes USER GUIDE 12.6.2018 Contents 1. DESIGN APPROACH...3 2. MATERIALS AND DIMENSIONS...4 3. FABRICATION...5 3.1 Fabrication Method... 5 3.2 Quality Control... 5 3.3 Shoe

More information

CONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE

CONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 905 APRIL 2007 CONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE TABLE OF CONTENTS 905.01 SCOPE 905.02 REFERENCES 905.03 DEFINITIONS

More information

Features Advantages Benefits

Features Advantages Benefits What is BoxBolt? A KEE SAFETY PRODUCT BoxBolt Guide - Eurocode 3 / DIN 18800 BOXBOLT is a fully tested and approved blind fixing solution for connecting to hollow section steelwork or where access is restricted

More information

RPA Plate Lifting Inserts Technical Manual

RPA Plate Lifting Inserts Technical Manual R-Group Finland Oy RPA Plate Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 13.7.2017 2 Table of Contents 1 DESCRIPTION OF THE

More information

TILT-UP LIFTING PRODUCTS

TILT-UP LIFTING PRODUCTS TILT-UP LIFTING PRODUCTS 37 Super-Lift www.meadowburke.com 877-518-7665 STRONGBACKS When will they be needed? A. If a panel looks like it would fall over when standing up. The strongback acts as a crutch

More information

CARES Technical Approval Report TA1-B 5064

CARES Technical Approval Report TA1-B 5064 CARES Technical Approval Report TA1-B 5064 Issue 1 BARUS SimGrip Standard and Positional Parallel Threaded Couplers Assessment of the BARUS SimGrip Standard and Positional Parallel Thread Coupler Product

More information

Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"

Art Mould Plastics SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966 Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" 1 of 10 Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 X-Chairs.. 4 Rod Spacers.. 4 Type-A. 5 Sand

More information

HRC 400 Series High Performance Reinforcement Couplers:

HRC 400 Series High Performance Reinforcement Couplers: HIGH PERFORMANCE REINFORCEMENT PRODUCTS HRC 400 Series High Performance Reinforcement Couplers: Proven and documented quality Exceed all known requirements for reinforcement couplers General advantages

More information

Mechanical Splicing Couplers for Reinforcement

Mechanical Splicing Couplers for Reinforcement MECHANICAL SPLICING SYSTEM 156 Mechanical Splicing Couplers for Reinforcement 1 M 2 Uday Sheth1, Dhruva Sheth2 Ishita Enterprises echanical Splice/Joint is the common terminology for the complete assembly

More information

Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.

Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available. Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon

More information

R-Group Finland Oy. RTA, RWTL and RWTS Lifting anchors Design instructions

R-Group Finland Oy. RTA, RWTL and RWTS Lifting anchors Design instructions R-Group Finland Oy RTA, RWTL and RWTS Lifting anchors Design instructions According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 28.12.2016 2 Table of contents 1 DESCRIPTION

More information

TECHNICAL DESIGN AND INSTALLATION GUIDE THE COMPLETE ENGINEERED SOLUTION FOR TEMPORARY MOVEMENT JOINTS

TECHNICAL DESIGN AND INSTALLATION GUIDE THE COMPLETE ENGINEERED SOLUTION FOR TEMPORARY MOVEMENT JOINTS TECHNICAL DESIGN AND INSTALLATION GUIDE THE COMPLETE ENGINEERED SOLUTION FOR TEMPORARY MOVEMENT JOINTS LOW COST, ECONOMICAL, TECHNICAL AND PRACTICAL SOLUTION. FULLY SEALED SYSTEM. FULLY GROUTED SYSTEM

More information

R-Group Finland Oy. REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved

R-Group Finland Oy. REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved R-Group Finland Oy REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 10.2.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...

More information

HANDSET WALL FORM. Handset Wall Form. Quick Assembly - can be built using only a hammer. Reduced weight increases productivity

HANDSET WALL FORM. Handset Wall Form. Quick Assembly - can be built using only a hammer. Reduced weight increases productivity HANDSET WALL FORM Quick Assembly - can be built using only a hammer Reduced weight increases productivity Unsurpassed flexibility in design and availability of panels for a wide variety of applications

More information

Reinforcement Couplers As An Alternative To Lap Splices: A Case Study

Reinforcement Couplers As An Alternative To Lap Splices: A Case Study Reinforcement Couplers As An Alternative To Lap Splices: A Case Study Singh R. Department of Civil Engineering, Graphic Era University, Dehradun, Uttarakhand, INDIA Himanshu S. K. Department of Civil Engineering,

More information

PS 3000 Installation Manual Step-By-Step Procedures C.9. DOOR AND WINDOW OPENINGS C.9.1 PREPARE IN ADVANCE. C.9.2 VBUCK CONSTRUCTION.

PS 3000 Installation Manual Step-By-Step Procedures C.9. DOOR AND WINDOW OPENINGS C.9.1 PREPARE IN ADVANCE. C.9.2 VBUCK CONSTRUCTION. C.9. DOOR AND WINDOW OPENINGS Openings for doors and windows are formed with bucks, or frames, which are constructed to the rough opening dimensions required for the doors and windows to be installed.

More information

CI/SfB Et6. September Stainless Steel Reinforcement for the Construction Industry

CI/SfB Et6. September Stainless Steel Reinforcement for the Construction Industry CI/SfB Et6 September 2012 Stainless Steel Reinforcement for the Construction Industry 2 2 Tel: 1300 304 320 www.ancon.com.au Ancon designs and manufactures high integrity steel products for the construction

More information

Civil Engineering Construction I (CBE5031)

Civil Engineering Construction I (CBE5031) Civil Engineering Construction I (CBE5031) Precast Concrete 1 Definition of Precast Concrete Precasting means casting a concrete member at a place other than where it will be used and then moving it to

More information

TECHNICAL MANUAL. PEC Column Shoe. Heavy-duty Bolted Column Connections

TECHNICAL MANUAL. PEC Column Shoe. Heavy-duty Bolted Column Connections TECHNICAL MANUAL PEC Column Shoe Heavy-duty Bolted Column Connections Version: PEIKKO GROUP 09/2018 PEC Column Shoe For bolted column connections Advanced casting process with the help of standard accessories

More information

A. Division 01: Administrative, procedural, and temporary work requirements apply to this section.

A. Division 01: Administrative, procedural, and temporary work requirements apply to this section. Copyright 2015 Metal Roof Innovations, Ltd. www.s-5.com SECTION 07 72 53 COLORGARD SNOW GUARDS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Snow guards for metal roofs. 2. [Non-penetrating] [Face

More information

CI/SfB. Xt6. May 2010 HALFEN KWIKASTRIP KT 10-EE HALFEN KWIKASTRIP CONCRETE CONCRETE

CI/SfB. Xt6. May 2010 HALFEN KWIKASTRIP KT 10-EE HALFEN KWIKASTRIP CONCRETE CONCRETE CI/SfB ay 2010 Xt6 HALFEN KWIKASTRIP HALFEN KWIKASTRIP CONCRETE CONCRETE KT 10-EE Halfen Kwikastrip reinforcement continuity strip Halfen Halfen Limited is a leading supplier of building fixings and components,

More information

3.2 SuperTie 50K Installation Guide

3.2 SuperTie 50K Installation Guide 3.2 SuperTie 50K Installation Guide FORM ERECTION 1. This G50K Gripper has been shipped partially disassembled. It is necessary for you only to attach the base plate. The Gripper Body, Base Plate, and

More information

CARES Technical Approval Report TA1-B 5053

CARES Technical Approval Report TA1-B 5053 CARES Technical Approval Report TA1-B 5053 Issue 3 Company Bartec Company Linxion Parallel Threaded Couplers Assessment of the Linxion Standard Type C and PI Parallel Threaded Coupler Product and Quality

More information

Originally Issued: 08/22/2014 Revised 03/10/2017 Valid Through: 08/31/2017

Originally Issued: 08/22/2014 Revised 03/10/2017 Valid Through: 08/31/2017 EVALUATION SUBJECT: DBDI REINFORCING BAR MECHANICAL SPLICE SYSTEM FOR STEEL REINFORCING BARS IN CONCRETE REPORT HOLDER: Dayton Superior Corporation 1125 Byers Road Miamisburg, OH 45342 (800) 745-3700 www.daytonsuperior.com

More information

DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS

DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS Peter J. Carrato, William F. Brittle Bechtel Power Corporation, USA Abstract Fossil fueled power-plant projects provide many design

More information

-165 C / -265 F CRYOGENIC REBAR SPLICING SYSTEMS

-165 C / -265 F CRYOGENIC REBAR SPLICING SYSTEMS -165 C / -265 F CRYOGENIC REAR SPLICING SYSTEMS Cryogenic Rebar Splicing Systems Cryogenic Rebar Splicing systems are an extension to the LENTON line of concrete reinforcement products available from Pentair.

More information

Racking Solutions for Timber Framed Buildings T-RS-UK Edition. +44 (0)

Racking Solutions for Timber Framed Buildings T-RS-UK Edition. +44 (0) Racking Solutions for Timber Framed Buildings T-RS-UK 2014 Edition +44 (0) 1827 255 600 www.strongtie.co.uk Racking Solutions for Timber Framed Buildings About Simpson Strong-Tie For more than 50 years

More information

SECTION DUALGARD SNOW GUARDS

SECTION DUALGARD SNOW GUARDS Copyright 2016 Metal Roof Innovations, Ltd. www.s-5.com SECTION 07 72 53 DUALGARD SNOW GUARDS This section has been prepared by Metal Roof Innovations, Ltd. for use in the preparation of a project specification.

More information

US Pool Lift Model #114 (Independence) Installation Guide

US Pool Lift Model #114 (Independence) Installation Guide US Pool Lift Model #114 (Independence) Installation Guide This manual has been provided to assist with lift installation. For further assistance please contact your authorized US Pool Lift dealer. Toll

More information

Frequently Asked Questions

Frequently Asked Questions Frequently Asked Questions Q1: What is a temporary horizontal lifeline system? A1: A temporary horizontal lifeline (HLL) system is a fall protection anchorage system designed to attach to a suitable anchor.

More information

fischer Test Report Fixing Tests for

fischer Test Report Fixing Tests for fischer Test Report Fixing Tests for CONTENTS 1. Test Parameters 2. Fixings Products Tested 2.1 fischer Nylon SX Plug 2.2 fischer Nylon M Unit 2.3 fischer FFS Frame Fixing Screw 2.4 fischer FIS V 360 S

More information

SUPERPLUS M8-M16. The undercut fixing system that does not require a special setting tool. FUNCTION BENEFITS

SUPERPLUS M8-M16. The undercut fixing system that does not require a special setting tool. FUNCTION BENEFITS SUPERPLUS M8-M16 The undercut fixing system that does not require a special setting tool. FUNCTION Automatic self-undercutting. The unique design of the SUPERPLUS causes an undercut to be created when

More information

Heavy Rib. Page 1 of 6. Expanded Mesh & Metal Products. Key Product Features:

Heavy Rib. Page 1 of 6. Expanded Mesh & Metal Products. Key Product Features: TMI- is used widely in construction work for joints, stop-end, retaining walls and columns. It creates a strong bond base for successive pours. is fixed as permanent formwork. Key Product Features: Unique

More information

Garage Beam System DAYTONSUPERIOR.COM FORMING. For Post-Tensioned Beam and Slab Parking Structures

Garage Beam System DAYTONSUPERIOR.COM FORMING. For Post-Tensioned Beam and Slab Parking Structures Garage Beam System For Post-Tensioned Beam and Slab Parking Structures FORMING The Garage Beam System is a complete forming system designed specifically for post-tensioned beam and slab multi-story parking

More information

ASSEMBLY INSTRUCTIONS RESIDENTIAL SOLUTION CROSSRAIL GROUND MOUNT SYSTEM USA

ASSEMBLY INSTRUCTIONS RESIDENTIAL SOLUTION CROSSRAIL GROUND MOUNT SYSTEM USA ASSEMBLY INSTRUCTIONS RESIDENTIAL SOLUTION CROSSRAIL GROUND MOUNT SYSTEM USA TABLE OF CONTENTS TABLE OF CONTENTS SAFETY REGULATIONS MATERIALS REQUIRED ASSEMBLY ENGINEERING DRAWINGS TERMS AND CONDITIONS

More information

www.fastformsystems.com info@fastformsystems.comm South Tel: 00 44 (0) 207 1481274 North Tel: 00 44 (0) 8456 171152 Fast-Form The Complete Formwork system Safer / Faster / Greener / Cheaper One system,

More information

Product Guide Specification

Product Guide Specification HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier

More information

fischer Test Report Fixing Tests for Bison Hollow Core Slabs

fischer Test Report Fixing Tests for Bison Hollow Core Slabs fischer Test Report Fixing Tests for Bison Hollow Core Slabs Testing on Bison Hollow Core Slabs 1. Introduction Contents Test Parameters Bison Hollow Core Slab Information 2. Fixings Products Tested FISV

More information

Fig Beam Clamp Retaining Strap (B-Line B3367)

Fig Beam Clamp Retaining Strap (B-Line B3367) Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized

More information

Concrete Screw-Anchors

Concrete Screw-Anchors Screw-Anchors Screw-Anchor are a totally removable rotation setting, thread forming anchor, ideal for either temporary or permanent anchoring into substrates such as concrete, brick, hollow brick or block.

More information

Easy to Use A7 Saves You Time and Money

Easy to Use A7 Saves You Time and Money ADHESIVE ANCHORING SPECIALISTS Easy to Use Saves You Time and Money DESCRIPTION/SUGGESTED SPECIFICATIONS* Fast Dispensing, Fast Curing The acrylic resin and hardening agent are completely mixed as they

More information

FALSEWORK SOLUTIONS: SLAB SHORING SYSTEM - ROYALFRAME50 SERIES

FALSEWORK SOLUTIONS: SLAB SHORING SYSTEM - ROYALFRAME50 SERIES ROYALFRAME50 SLAB SHORING SYSTEM ROYAL FRAME 50 ROYALframe50 is a lightweight, improved alternate formwork shoring frame. It has galvanised tube legs, each with a 51mm outside diameter and a safe work

More information

PRODUCT DESIGN AND SELECTION GUIDE REVOLUTIONISING CONCRETE LIFTING

PRODUCT DESIGN AND SELECTION GUIDE REVOLUTIONISING CONCRETE LIFTING REVOLUTIONISING CONCRETE LIFTING PRODUCT DESIGN AND SELECTION GUIDE PRECAST CONCRETE, TILT WALL CONSTRUCTION, CIVIL ENGINEERING & DEMOLITION LIFTING SYSTEMS Contents Page Section 1.0 - Introduction Obelix

More information

FEATURES APPLICATIONS. Technical data sheet SSW - STEEL STRONG-WALL FOR TIMBER FRAME RACKING RESISTANCE.

FEATURES APPLICATIONS. Technical data sheet SSW - STEEL STRONG-WALL FOR TIMBER FRAME RACKING RESISTANCE. The Steel Strong-Wall is a corrugated steel panel which is designed to be fixed directly to the concrete foundations of a building, within the external or internal wall, via a bolted connection. FEATURES

More information

SECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.

SECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate. SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Welded stainless steel railing systems. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete; coordination with substrate.

More information

REINFORCING STEEL. Delete every occurrence of ASTM A 706 and replace with AASHTO M 31, Type W.

REINFORCING STEEL. Delete every occurrence of ASTM A 706 and replace with AASHTO M 31, Type W. July 1, 2018 REINFORCING STEEL The 2007 SCDOT Standard Specifications is amended as follows: Delete every occurrence of ASTM A 706 and replace with AASHTO M 31, Type W. Delete Subsection 703.2.1 in its

More information

1 Exam Prep Placing Reinforcing Bars Tabs and Highlights

1 Exam Prep Placing Reinforcing Bars Tabs and Highlights 1 Exam Prep Placing Reinforcing Bars Tabs and s These 1 Exam Prep Tabs are based on the CRSI Placing Reinforcing Bars Recommended Practices, 9 th Edition. Each 1 Exam Prep tabs sheet has five rows of tabs.

More information

F500 Steeplechase Waterjump with Valve Option

F500 Steeplechase Waterjump with Valve Option Gill Athletics www.gillathletics.com Phone: (800) 367-3090 Fax: (217) 367-8440 Excavation F500 Steeplechase Waterjump with Valve Option Installation Guide Read all instructions before installing!!! Establish

More information

1. Temperature Change: 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material surfaces.

1. Temperature Change: 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material surfaces. SECTION 05500- METAL FABRICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Tru-lift. The self lifting, core forming system from Forming Concepts Inc

Tru-lift. The self lifting, core forming system from Forming Concepts Inc Tru-lift The self lifting, core forming system from Forming Concepts Inc Features & Benefits Complete system raised during the lifting cycle, maximizing system effectiveness. Introduction Tru-lift is the

More information

1D - THREADED LIFTING SYSTEMS

1D - THREADED LIFTING SYSTEMS 1D - THREADED LIFTING SYSTEMS WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING SYSTEMS THL THS1 THS3-HD TIL Page 38 Page 40 Page 42 Page 46

More information

Tips For Designing Constructable Concrete Buildings

Tips For Designing Constructable Concrete Buildings Tips For Designing Constructable Concrete Buildings by Clifford Schwinger, P.E. The Harman Group, Structural Engineers King of Prussia, Pa. Structural Engineers Association of Ohio Annual Conference Presentation

More information

DIVISION: CONCRETE SECTION: REINFORCING STEEL REPORT HOLDER: SAS STRESSTEEL INC. 100 NEW DUTCH LANE FAIRFIELD, NEW JERSEY 07004

DIVISION: CONCRETE SECTION: REINFORCING STEEL REPORT HOLDER: SAS STRESSTEEL INC. 100 NEW DUTCH LANE FAIRFIELD, NEW JERSEY 07004 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1163 Reissued 12/2016 This report is subject to renewal 12/2017. DIVISION: 03 00

More information

BRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT NON-STRUCTURAL ELEMENTS # 3. Restraint systems

BRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT NON-STRUCTURAL ELEMENTS # 3. Restraint systems SEISMICALLY BRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT DESIGN CRITERIA # 2 NON-STRUCTURAL ELEMENTS # 3 Restraint systems The next step in the non-specific design pathway in NZS

More information

1/26/2015 DETAILS CIP DETAIL EXAMPLES WHY SIMPLIFY DETAILS? CIP DETAIL EXAMPLES DETAILING FOR SIMPLICITY

1/26/2015 DETAILS CIP DETAIL EXAMPLES WHY SIMPLIFY DETAILS? CIP DETAIL EXAMPLES DETAILING FOR SIMPLICITY Detailing of ABC Bridges for Simplicity and Durability Michael P. Culmo, P.E. CME Associates, Inc. East Hartford, CT DETAILS This presentation contains many preferred details My favorite details will be

More information

Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"

Art Mould Plastics SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966 Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 Stackable Chair... 5 X-Chairs.. 7 Rod Spacers.. 8

More information

Concrete Inserts. B Adjustable Metal Deck Ceiling Bolt

Concrete Inserts. B Adjustable Metal Deck Ceiling Bolt B3019 - Adjustable Metal Deck Ceiling Bolt Size Range: 3 /8"-16 thru 3 /4"-10 rod Function: For use in metal deck formed concrete to attach hanger rods. Allows for pre-positioning of hanger rods in poured

More information

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR HEADED AND MECHANICALLY ANCHORED DEFORMED REINFORCEMENT BARS IN TENSION EC 006-2014 (Adopted

More information

The Art of Construction and The Design. Direct, rebar chair.

The Art of Construction and The Design. Direct, rebar chair. The Art of Construction and The Design Direct, rebar chair. Prefabricated element, made out of a thin steel rebar with plastic tipped legs in order to prevent corrosion of the support area between the

More information

G-FIRE GROOVED COUPLINGS

G-FIRE GROOVED COUPLINGS G-FIRE GROOVED COUPLINGS Figure 5 G-FIRE Rigid Page 5 Figure 5 Flexible Page GRINNELL are designed for grooved end pipe and are available in nominal sizes of 25mm (") to 3mm (2") including BS, and ISO

More information

Item 442 Metal for Structures

Item 442 Metal for Structures Item 442 Metal for Structures 1. DESCRIPTION 2. MATERIALS Provide structural steel, high-strength bolts, forgings, steel castings, iron castings, wrought iron, steel pipe and tubing, aluminum castings

More information

R-RBL Rawlbolt - Loose Bolt for use in hollow core slab and cera mic substrates

R-RBL Rawlbolt - Loose Bolt for use in hollow core slab and cera mic substrates Mechanical Anchors R-RBL Rawlbolt - Loose Bolt for use in hollow core slab and cera mic substrates World's most popular all-purpose expanding shield anchor - loose bolt version Product information Features

More information

A. Division 01: Administrative, procedural, and temporary work requirements apply to this section.

A. Division 01: Administrative, procedural, and temporary work requirements apply to this section. Copyright 2016 Metal Roof Innovations, Ltd. www.s-5.com SECTION 26 31 00.01 PHOTOVOLTAIC COLLECTOR ATTACHMENT SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Photovoltaic Collector Attachment

More information

FRANK Stremaform formwork elements

FRANK Stremaform formwork elements FRANK formwork elements technologies for the construction industry Applications Working joints working joints enable large structural elements to be formed in sections. The sequence of these working joints

More information

TECHNICAL MANUAL. HPKM Column Shoe. Reliable Bolted Column Connections

TECHNICAL MANUAL. HPKM Column Shoe. Reliable Bolted Column Connections TECHNICAL MANUAL Column Shoe Reliable Bolted Column Connections Version: PEIKKO GROUP 05/2014 Column Shoe For bolted column connections System benefits The stiff ness of Peikko s column connection is verifi

More information

5.0 NUDURA PRODUCTS ON SITE STORAGE PACKAGING, UNIT ASSEMBLY, USAGE

5.0 NUDURA PRODUCTS ON SITE STORAGE PACKAGING, UNIT ASSEMBLY, USAGE 5.0 NUDURA PRODUCTS ON SITE STORAGE PACKAGING, UNIT ASSEMBLY, USAGE NUDURA Inc. has one of the most complete lineups of products and accessories available today in the construction industry. NUDURA s Integrated

More information

R-CAS-V Spin-In Capsule with Threaded Rods

R-CAS-V Spin-In Capsule with Threaded Rods R-CAS-V Spin-In Capsule with Threaded Rods High-performance, quick-setting, styrene-free vinylester resin for concrete Approvals and Reports ETA-10-0108 Product information Features and benefits Approved

More information

Lesson 7 REINFORCING CAGE. Version 1-1/

Lesson 7 REINFORCING CAGE. Version 1-1/ Lesson 7 REINFORCING CAGE 7-1 Version 1-1/15 7-1 Learning Outcomes Describe cage construction Determine the circumference of a shaft and rebar cage and calculate the required number of side spacers. Explain

More information

CI/SfB (29) Et6. July Punching Shear Reinforcement for the Construction Industry

CI/SfB (29) Et6. July Punching Shear Reinforcement for the Construction Industry CI/SfB (29) July 2009 Et6 Punching Shear Reinforcement for the Construction Industry 2 This brochure is printed on paper produced from 80% recycled post-consumer fibre and 20% virgin pulp which is sourced

More information

Special Provision No. 109S17 June 2017

Special Provision No. 109S17 June 2017 AMENDMENT TO OPSS 905, NOVEMBER 2014 Special Provision No. 109S17 June 2017 OPSS 905, November 2014 Construction Specification for Steel Reinforcement for Concrete is deleted in its entirety and replaced

More information

RapidBrace Installation Guide

RapidBrace Installation Guide RapidBrace Installation Guide RapidBrace cast-in Brace Anchor System enables structural bracing in early strength concrete. RapidBrace is cast-into the concrete floor and is ready to load in concrete with

More information

COLUMN SHOES HPKM, PPKM, PEC

COLUMN SHOES HPKM, PPKM, PEC COLUMN SHOES HPKM, PPKM, PEC Version 9/2007 (Update 7/2009) Replaces brochure /2006 HPKM, PPKM, PEC -column shoes Benefits of Peikko -column joints Saves time, costs and materials Easy and fast adjustments

More information

INSTALLATION GUIDE PLEASE READ ENTIRE INSTRUCTION MANUAL BEFORE PROCEEDING!

INSTALLATION GUIDE PLEASE READ ENTIRE INSTRUCTION MANUAL BEFORE PROCEEDING! DURA - TRENCH INSTALLATION GUIDE This guide is intended to aide in the installation of Dura-Trench systems. There are many different applications and situations for the use of this product and the installation

More information

Originally Issued: 02/02/2009 Revised: 11/09/2017 Valid Through:02/28/2019

Originally Issued: 02/02/2009 Revised: 11/09/2017 Valid Through:02/28/2019 EVALUATION SUBJECT: LENTON Mechanical Splice System for Steel Reinforcing Bars In Concrete REPORT HOLDER: ERICO International Corporation 34600 Solon Road Solon, Ohio 44139 800 248-2677 www.erico.com mugalde@erico.com

More information

Post-tensioned Concrete Design PT Installation Guidance

Post-tensioned Concrete Design PT Installation Guidance Post-tensioned Concrete Design PT Installation Guidance Lee Maartensz Construction Manager - Structural Systems UK Ltd PT Installation Bonded Flat Slabs Installation 1 Flat Slabs Beam and Slab Installation

More information

CONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE

CONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 905 MAY 1994 CONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE 905.01 SCOPE 905.02 REFERENCES 905.03 DEFINITIONS TABLE OF CONTENTS 905.04

More information