FRANK Stremaform formwork elements
|
|
- Eugenia McDowell
- 6 years ago
- Views:
Transcription
1 FRANK formwork elements technologies for the construction industry
2 Applications Working joints working joints enable large structural elements to be formed in sections. The sequence of these working joints is precisely scheduled depending on work at the construction site. Working joints may be fitted with water stops and / or with transverse force dowels for absorption of shear forces. 1.pour 2.pour Standard 1.pour 2.pour with water stop Splitboard slab separation joint elements Other types of working joints is suited for all types of working joints. Spacer Box-Outs Free standing formwork elements Kicker formwork Controlled crack joints controlled crack joints are used to produce intended cracks in working joints by deliberate weakening of the concrete cross section. The cross section is weakened by introducing a separation layer, which prevents the production of a concrete bond within one third of the concrete cross section. Standard with water stop Expansion joints Expansion joints or movement joints separate structural elements made of concrete from each other. EPS or mineral wool inserts are used to form the required joint between the structural elements. Watertight expansion joints are produced by incorporating a waterstop. elements are prefabricated in our factory, ready for installation on site. elements can be manufactured with a metal waterstop or a rubber water bar cage. The rubber water bar is installed in the cage at the construction site. Standard with water stop 2
3 Quick manufacture to your layout drawings On receipt of your layout drawings our design department will submit proposals for suitable joint designs. elements will be shaped to the required size in our factory so that they are ready for quick on-site installation in conformity with installation layouts supplied. Benefits of 2. pour The resistance of construction joints produced with to shear forces is identical to the values obtained with monolithic concrete. Spacer ensures a reliable concrete cover and formwork for the lower reinforcement layers without any gaps. Water stops are integrated in our factory. Reduced assembly time, formwork elements will be shaped to size in our factory. No formwork removal required. Anchors placed at the rear side of the formwork elements provide for increased freedom of movement in the second concrete pour. Short delivery times due to sufficient stock accompanied by quick cutting to size in our factory. No need for formwork removal, i.e. the reinforcement can be continued without interruption in the second concrete pour. Our transport department with factory owned trucks guarantees fast dispatch and reduces delivery times to the construction site to a minimum. Technologies for the construction industry 3
4 Different types is the formwork material for medium size slabs and walls. is fixed between the reinforcement layers. With its rough surface flat material satisfies the requirements of an indented joint to DIN A metal water stop or a rubber water bar cage can be installed in our factory if required. The formwork is supplied precisely to your layout specifications. Strong Strong with factory made stiffening made of lattice girders is suited for any dimensions of structural elements. If required, a metal water stop or a rubber water bar cage can also be installed in this case as well. Strong is supplied precisely to your layout specifications. Product Application: Slab widths Wall thicknesses Benefits: 500 mm 300 mm Elements precisely delivered to your specifications for medium size slabs Water bars can be integrated in our factory Strong > 500 mm > 300 mm Suited for very thick slabs due to vertical stiffening Elements are exactly shaped to the required size Water bars can be integrated in our factory 4
5 Working joints Working joints in reinforced concrete constructions Complete formwork element for reduced structural element heights Stremaweb with fibre concrete rail Other types of formwork material Standard Strong Other designs and types of assembly Spacer with fibre concrete rail Stremafix rear anchoring for underwater base slabs Technologies for the construction industry 5
6 Working joints Working joints with water stop With metal water stop Stremaflex with coated metal water stop With rubber water bar cage Other types of working joints Kicker formwork Free standing formwork elements Box-Outs Hopper formwork elements 6
7 Standard is used as lost formwork for working joints in floor slabs, ceilings and walls. Consisting of an expanded metal welded between steel bars, is placed between the reinforcement bars providing a rough surface to the finished concrete. This surface forms an indented structure with the second concrete pour so that the working joint transfers shear forces identical to those obtained with monolithic concrete (proven by tests carried out at the IBMB Brunswick). Wooden strip Fibre concrete rail Distance of the formwork The bond between concrete and provides a shear strength equivalent to that of monolithic concrete Manufactured to size in our factory, eliminates the need for traditional formwork erection and stripping, as well as subsequent scabbling of the joint resulting in faster pouring cycles Maximizing off-site prefabrication minimizes work on the construction site and guarantees fast progress of the project. Technologies for the construction industry 7
8 Strong Strong Strong is the combination between flat material with factory-made stiffening and it is eminently suited for use with thick structural elements. Factory made stiffening of the rear side with girders (e.g. with Stremafix) produces formwork elements for any size of working joints. Rear side stiffening Wooden strip Strong Fibre concrete rail or Spacer Distance of the formwork Strong Strong with indented joint Formwork elements for very large working joints can be produced. No additional formwork elements are required for the 2nd concrete pour due to rear anchoring via supports in the first concrete pour. Installed formwork elements remain in the concrete and reinforcement layout is unaffected. 8
9 Metal water stop formwork element with metal water stop All formwork elements can be supplied with a metal water stop. The jointing plate is available in standard widths of 250 mm or 300 mm or according to your specifications. To prevent void formation under the metal waterstop during concrete placement, the waterstop can be angled upwards by 15º on both sides. Wooden strip Metal water stop Fibre concrete rail or Spacer Distance of the formwork with metal water stop Transition base slab / wall formwork elements remain in the concrete. There is no need for formwork removal and associated tasks. The rough surface of the formwork element produces a bond with shear strengths equivalent to those of monolithic concrete. Technologies for the construction industry 9
10 Rubber water bar cage formwork element with integrated rubber water bar cage All elements can be supplied with an integrated rubber water bar cage. The cage is suited to take a rubber water bar 200, 250 or 320 mm wide or made to order. To prevent void formation under the rubber water bar during concrete placement, the cage can be angled upwards by 15º on both sides. Wooden strip Rubber water bar cage Rubber water bar Fibre concrete rail or Spacer Distance of the formwork with rubber water bar cage Transition base slab / wall 10
11 Kicker formwork Kicker formwork Kicker formwork can be used between base slab/wall or wall/ ceiling and can optionally be supplied with metal water stop (also coated) or alternatively with rubber water bar cage. Special designs and connections (e.g. round, T-piece) are also available. kicker formwork with metal water stop Stremaflex kicker formwork with coated metal water stop kicker formwork with rubber water bar cage Sheet metal height 250 or 300 mm (Standard: d = 2 mm, alternatively 1.5 mm), special designs can be supplied. Sheet metal height 150 mm d = 1.5 mm special designs can be supplied. Rubber water bar cage design matches planned joint sealant T-piece Angled element Linear Curved element Cross piece Optimum assembly at the construction site due to factory-made adapters! Technologies for the construction industry 11
12 Free standing formwork elements Free standing formwork elements free standing formwork elements for slabs are available in different heights. Free standing formwork elements are positioned on top of the lower reinforcement layer. They guarantee that the correct distance lower and upper reinforcement is maintained. Wooden strip free standing formwork element Spacer Distance of the formwork 2. pour Economically priced formwork elements with quick installation, offer all benefits of Easy installation of upper reinforcement by simple positioning. 12
13 Foundation Box-outs Foundation Box-outs formwork elements are used to form box-outs in foundations that are used as a recess for subsequent production of supports and columns. After completion of the foundation slab or individual foundations, steel or reinforced concrete columns can be positioned exactly according to the layout. The internal surface of the box-out produced by formwork elements is perfectly indented. Between the column and base slab there is a positive connection after pouring of the infill concrete Using a Pecafil external formwork in combination with internal formwork, individual column foundations can be easily and economically produced. Pecafil formwork elements can be reused for several identical foundations. They can be easily moved to a new position manually without the need for lifting equipment. Technologies for the construction industry 13
14 Box-Outs / Hopper formwork elements Box-Outs formwork elements for box-outs are used for wall or slab openings. These openings for e.g. large diameter pipe leadthroughs, are subsequently filled with concrete. formwork elements for recesses are available in various designs and sizes. Many options are available, such as elements with stiffening, concrete cover rails, chutes, with seals and wooden covers used as drop protection. Box-Outs Hopper formwork elements Hopper formwork elements Hopper formwork elements are used to produce conical concrete structures (e.g. for wastewater treatment plants or silos) where they form the upper formwork. The surface is subsequently covered with a screed to the required concrete cover. Fixing at the bottom via anchors / lift protectors prevents the risk of flotation. hopper formwork elements can also be supplied complete with factory-made bracing. 14
15 Spacer Spacer: The combined spacer Spacers formwork elements are used to maintain the concrete cover and the gap beneath the continuous reinforcement and the main formwork elements. Spacers prevent seepage of the concrete thus avoiding timeconsuming cleaning of the formwork. Different pitches and spacing to suit all rebar diameters are incorporated during production in our factory. Wooden strip Spacer Distance the formwo Fibre reinforced concrete rails are available in square or triangular A large range of concrete covers are available. Suitable for slabs with very heavy reinforcement. Technologies for the construction industry 15
16 Indented joint formwork element with indented joint All formwork elements can be supplied with one or more indented joints. The standard indented joint satisfies all requirements to DIN The geometry of the indented joint can be designed to suit your specific requirements. Wooden strip Fibre concrete rail or Spacer Distance of the formwork n x 3 x 2 x 1 x with indented joint Strong with indented joint formwork elements can be designed to meet your individual requirements. Strong with factory-made stiffening can also be supplied with indented joints. All elements can be supplied with an integrated metal water stop or rubber waterbar cage. 16
17 Fixing anchor Stremafix fixing anchor The Stremafix fixing anchor for formwork elements in working joints ensures tensile and compressive strength of the formwork during the installation phase and protects it against the pressure of the concrete. The fixing anchor consists of a loop hook with safety bolt for hanging into the lower reinforcement, a tension rebar and a spring clamp. Stremafix fixing anchors are recommended for slab widths > 1.0 metre Quick assembly due to high degree of prefabrication. No welding is required on site for fixing the formwork element in place. The snap-on clip is reusable. Technologies for the construction industry 17
18 Max Frank Limited Technologies for the construction industry Distributed in New Zealand by Phone W W
Stremaform. Formwork elements. Edition International
Formwork elements Edition International www.maxfrank.com Formwork elements Content Applications...................................4 System........................................6 Material types..................................7
More informationProject s fiche INOV. Frisomat Case study project's fiche INOV
Project s fiche INOV Clear Flatro building 49 metres long The Flatro industrial building in Villers-le-Bouillet measures 15 metres by 49 metres and is 6 metres high. The building rests on concrete plinths
More informationDesign No. HI/BP PERIMETER FIRE BARRIER SYSTEM Hilti, Inc. ASTM E 2307 Table 1
FIRESTOP JOINT SPRAY CFS-SP WB SILICONE JOINT SPRAY CFS-SP SIL F-RATING 2-HR. 2-HR. T-RATING -HR. -HR. APPLICATION THICKNESS PERIMETER FIRE BARRIER SYSTEM Hilti, Inc. ASTM E 2307 Table /8" WET FILM (/6"
More informationSPECIFICATION FOR REINFORCED SOIL WALL
SPECIFICATION FOR REINFORCED SOIL WALL 1.0 EXTENT OF WORK The work shall consist of Reinforced Soil walls built in accordance with this specification and in conformity with the lines, levels and details
More informationSealing products. The new Generation of sealing-products
Sealing products The new Generation of sealing-products Product Overview Product wolfseal KB 16 Application wolfseal KB 16.7 can be installed in construction joints of all types in concrete units up to
More informationReinforced concrete double walls
Reinforced concrete double walls Build faster, pay less. Strength in building technology Uses The Kerkstoel reinforced double walls consist of two slabs of reinforced concrete joined to each other by lattice
More informationTECHNICAL MANUAL. TENLOC Panel Connector. Hidden Latch Connection for Precast Panels
TECHNICAL MANUAL TENLOC Panel Connector Hidden Latch Connection for Precast Panels Version: Peikko Group 06/2018 TENLOC Panel Connector Fast connection for precast elements TENLOC Panel Connector is a
More informationRequirements for Measuring and Pricing of Structural Concrete
Requirements for Measuring and Pricing of Structural Concrete October 2016 TRANSPORT INFRASTRUCTURE IRELAND (TII) PUBLICATIONS About TII Transport Infrastructure Ireland (TII) is responsible for managing
More informationTECHNICAL MANUAL. PVL Connecting Loop. Wall Connecting Loop Box with Single Wire
TECHNICAL MANUAL PVL Connecting Loop Wall Connecting Loop Box with Single Wire Version: PEIKKO GROUP 11/2012 PVL Connecting Loop Single wire wall connecting loop Benefits of PVL Easy to install, individual
More informationTECHNICAL MANUAL. PEC Column Shoe. Heavy-duty Bolted Column Connections
TECHNICAL MANUAL PEC Column Shoe Heavy-duty Bolted Column Connections Version: PEIKKO GROUP 09/2018 PEC Column Shoe For bolted column connections Advanced casting process with the help of standard accessories
More informationTHE CUPOLEX SOLUTION EXPANSIVE SOILS. www. cupolex.ca
THE CUPOLEX SOLUTION EXPANSIVE SOILS www. cupolex.ca EXPANSIVE SOILS IDENTIFYING THE PROBLEM The problem of expansive soils is well known to engineers and builders. It affects construction sites throughout
More informationReinforced concrete double walls
Reinforced concrete double walls HOW YOUR BUILDING WORKS TAKES PLACE FASTER WHILE YOUR COSTS REMAIN LOW DOUBLE WALLS Strength in building technology The Kerkstoel reinforced double walls consist of two
More informationmodular scaffolding R+
modular scaffolding R+ 1. Stand 6. Transverse U-transom Stand is the main element of modular scaffolding. Made of 48.2x3.2 mm steel pipe. Every 0,5m on the whole stand length are installed steel plates
More informationR-Group Finland Oy. REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 10.2.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
More informationR-Group Finland Oy. RLA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy RLA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 16.8.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
More informationInnovative Construction Technology
Innovative Construction Technology Learning Objectives Be able to explain the innovativeness of the following construction technology / method Top Down Construction Pre-stressed concrete System Formwork
More informationInterior Hangers. Application
Application Interior bridge deck hangers are typically fabricated using two heavy duty sheet metal end clips that have been electrically resistance welded to an appropriate sized wire or formed metal connecting
More informationAlisply Circular Headquarters - Spain Alsina USA - Chicago Alsina USA - Miami
Alisply Circular Headquarters - Spain Encofrados J. Alsina, S.A. Camí de la Font Freda, 1 08110 - Montcada i Reixac, Barcellona - Spain Tel. +34 935 753 000 Fax. +34 935 647 059 E-mail: alsina@alsina.es
More informationGarage Beam System DAYTONSUPERIOR.COM FORMING. For Post-Tensioned Beam and Slab Parking Structures
Garage Beam System For Post-Tensioned Beam and Slab Parking Structures FORMING The Garage Beam System is a complete forming system designed specifically for post-tensioned beam and slab multi-story parking
More informationSECTION 8130 XR-3-PW FABRIC BAFFLE WALL SPECIFICATION
SECTION 8130 XR-3-PW FABRIC BAFFLE WALL SPECIFICATION PART 1 GENERAL 1.01 WORK INCLUDED 1.01.1 This specification covers the design, fabrication, and erection of tension-fabric baffle systems composed
More informationSECTION CONCRETE FORMWORK
SECTION 03100 CONCRETE FORMWORK PART 1 GENERAL 1.1 REFERENCES A. The following is a list of standards which may be referenced in this section: 1. American Concrete Institute (ACI): a. 117, Standard Specifications
More information1 Exam Prep Prov Module: Vertical Formwork Questions and Answers
1 Exam Prep Prov Module: 27308-14 Vertical Formwork Questions and Answers 1. The amount of formwork needed for a job can be influenced by. A. The size of the forming crew B. The project budget C. Materials
More informationTERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B www.euroacc.co.uk Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger
More informationStep 4: Can my rate of production be met with a single. Step 5: Prepare a simple line drawing of the ideal and
Design Guidelines PACLINE Enclosed Track Conveyor An enclosed track overhead conveyor consists of a powered chain running within a round track. Loads are suspended from the chain pendants that stick out
More informationPreventing Water Leakage through Construction Joints using SYNKOFLEX Preformed Compressible Waterstop
Preventing Water Leakage through Construction Joints using SYNKOFLEX Preformed Compressible Waterstop Introduction A typical problem in most Water Retaining Structures is the leakage of water through Construction
More informationPFEIFER Lifting Anchors: The original as standard for quality and a maximum of safety.
PFEIFER Lifting Anchors: The original as standard for quality and a maximum of safety. 16 PFEIFER Round Thread Exceptionally robust thread even no chance for hammer blows Not sensitive against dirt enables
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS
PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment
More informationSECTION RIGID PAVEMENT
SECTION 02750 PART 1 GENERAL RIGID PAVEMENT 1.1 SUMMARY A. Section Includes: 1. Concrete sidewalks. 2. Concrete stair steps. 3. Concrete integral curbs gutters. 4. Concrete parking areas and roads. B.
More informationElevated Slab Sequence
Elevated Slab Sequence The following group of photos shows the sequence for installa4on of a one- way elevated slab. (Slab & Beam with Reinforcing & Post- Tensioning) Columns Placed & Form Support (Scaffolding)
More informationSigmaJoint. The Ultimate Joint J. Armouring & Load Transfer Systems. Metallic Leave-In-Place Contraction & Day Joints for INDUSTRIAL CONCRETE FLOORS
SigmaJoint Metallic Leave-In-Place Contraction & Day Joints for INDUSTRIAL CONCRETE FLOORS TYPE - D TYPE - O The Ultimate Joint J Armouring & Load Transfer Systems SigmaJoint Introduction Joints are unavoidable
More informationtried tested trusted since 1982 manufacturing
tried tested trusted F O R 3 0 Y E A R S Developed in the early 80 s Pecafil was patented by the FRANK Group in 1982 and has been developed into a complete permanent formwork system that primarily speeds
More informationRPA Plate Lifting Inserts Technical Manual
R-Group Finland Oy RPA Plate Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 13.7.2017 2 Table of Contents 1 DESCRIPTION OF THE
More informationSECTION VIBRATION ISOLATION
SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping
More informationKS - Assembly and operating manual Trench box
Summary Technical data Montage Implementation Extraction Cinematic p4 p7 p9 p12 p13 KRINGS INTERNATIONAL FRANCE - KS - Your Trench Shoring equipment is a monoblock box system, KS type (KS60 or KS100 according
More informationSchöck Isokorb type KS
Schöck Isokorb type Schöck Isokorb type Fig. 1: Schöck Isokorb type Schöck Isokorb type Suitable for cantilevered steel balconies and canopies. It transfers negative moments and positive shear forces.
More informationEUROACCESSORIES COLUMN FORMERS
EURO ACCESSORIES COLUMN FORMERS www.euroacc.co.uk Introduction: Euro Accessories are the sole distributors of the BAG Column Formers in the UK and Ireland. BAG have 15 years experience in the production
More informationFIRESTOP JOINT SPRAY CFS-SP WB. 2mm (0.079") WET FILM ± 7.5 ± 5
Design No. CEJ 27 P (HI/JS 20-05) Table. CONCRETE FLOOR ASSEMBLY: Max. two-hour rated concrete floor assembly made from either lightweight or normal weight concrete with a density of 00-50 pcf, with a
More informationLattice Plate Flooring
Lattice Plate Flooring Introduction Pekso Precast manufacturers and supplies a range of precast concrete structural building products ranging from foundations and flooring systems that includes Lattice
More informationTECHNICAL MANUAL. PETRA Slab Hanger. Hollow-Core Support for Slab Openings
TECHNICAL MANUAL Slab Hanger Hollow-Core Support for Slab Openings Version: PEIKKO GROUP 9/1 Support for Hollow-Core Slabs Around Floor Openings Create openings in hollow-core slab floor with Readily available
More informationTECHNICAL MANUAL. PSB Punching Reinforcement. Shear Reinforcement for Concrete Structures
TECHNICAL MANUAL PSB Punching Reinforcement Shear Reinforcement for Concrete Structures Version: PEIKKO GROUP 06/2013 PSB Reinforcement against punching failure of slabs System benefits Higher resistances
More informationPro-Con Structural Study of Alternate Floor Systems
Andrew Covely Structural Dr. Linda Hanagan The Helena New York City, NY October 27, 2004 Pictures courtesy of Fox & Fowle Architects Pro-Con Structural Study of Alternate Floor Systems Executive Summary
More informationIntermountain Section AWWA Conference - 2.0MG Layton Water Tank. Jake O Brien
Intermountain Section AWWA Conference - 2.0MG Layton Water Tank Jake O Brien Presentation Outline Layton City s decision process Tank Design/Construction Tendon Tanks - don t shed the good stuff Layton
More informationItem 442 Metal for Structures
Item 442 Metal for Structures 1. DESCRIPTION 2. MATERIALS Provide structural steel, high-strength bolts, forgings, steel castings, iron castings, wrought iron, steel pipe and tubing, aluminum castings
More informationAluma EasySet Continuing Innovation from Aluma S ystems
Product Sheet Aluma EasySet Aluma Systems Concrete Construction Aluma EasySet Continuing Innovation from Aluma S ystems Introduction With more than 35 years of experience in shoring and formwork, Aluma
More informationLinear Drainage Z886. Perma-Trench. Installation Instructions. 100mm Clear Opening
Linear Drainage Z886 100mm Clear Opening Perma-Trench Installation Instructions Z886 Tools Required Tape Measure Phillips Head Screwdriver Hammer Utility Knife Marker Cordless Drill Reciprocating Saw Ear
More informationSECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationThe ACR : Advanced Design Features for a Short Construction Schedule
Transactions of the 17 th International Conference on Structural Mechanics in Reactor Technology (SMiRT 17) Prague, Czech Republic, August 17 22, 2003 Paper # S01-3 The ACR : Advanced Design Features for
More information1/22/2014. Pre & Post Pour
Pre & Post Pour Inspection 2 1 Overview 3 Documentation Pre-Pour P Inspection Equipment Reinforcement Post-Pour Inspection Stripping & Handling Visual & Dimensional Why Document? 4 Not just for posterity
More informationTERWA REBAR CONNECTION COUPLERS
TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger than the associated rebar, sometimes
More informationConstruction. Flexible PVC waterstops. Product Description. Product Data. Tests. Form. Storage. Technical Data
Construction Product Data Sheet Edition 2016-07_1 Flexible PVC waterstops Product Description Uses Characteristics / Advantages Flexible PVC waterstops used to seal construction and expansion joints in
More informationSika KAB combination joint waterbars waterstopping systems
PRODUCT DATA SHEET Sika KAB combination joint waterbars Waterbars for waterproofing construction and crack induced shrinkage joints in new reinforced concrete structures PRODUCT- DESCRIPTION KAB 125/KAB
More informationSECTION STAY-IN-PLACE INSULATED CONCRETE FORMING SYSTEM
ARCHITECTURAL SPECIFICATIONS MANUFACTURER: InterBlock LLC PO Box 1123, Sheboygan, WI 53082 Phone Number 920-207-7234 SECTION 03100 STAY-IN-PLACE INSULATED CONCRETE FORMING SYSTEM PART 1 GENERAL 1.01 Summary
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationSpacer Technologies. P:
P A R C H E M C O N S T R U C T I O N S U P P L I E S Spacer Technologies P: 1800 801 108 www.parchem.com.au Parchem / Max Frank Parchem Construction Supplies is the National Distributor of the Max Frank
More informationA-ONE Insulated Forms Installation Manual
A-ONE Insulated Forms Installation Manual Rockford, MN www.aoneform.com www.diversifoam.com info@diversifoam.com A-ONE Manual 180426.docx Disclaimer Notice The information in the A-ONE Insulated Forms
More informationLifting Sockets. Flat Lifting Sockets
Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer
More informationAnchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel ASTM A36, Fy = 36 ksi
STRUCTURAL NOTES MATERIAL STRENGTHS Structural Steel Reinforcing Steel Concrete Masonry Structural Lumber Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel
More informationRAPID Column Formwork For the highest requirements on concrete surfaces and edge formation. Product Brochure Issue 10/2017
For the highest requirements on concrete surfaces and edge formation Product Brochure Issue 10/2017 Content System advantages 5 For the highest requirements on concrete surfaces and edge formation 8 For
More informationmodular scaffolding R+
modular scaffolding R+ 1. Stand 6. Transverse U-transom Stand is the main element of modular scaffolding. Made of 48.2x3.2 mm steel pipe. Every 0,5m on the whole stand length are installed steel plates
More informationTILT-UP PRECAST CONCRETE SANDWICH PANELS. A. Work includes, but is not limited to, the following:
PART 1 GENERAL 1.01 SUMMARY SECTION 03460 TILT-UP PRECAST CONCRETE SANDWICH PANELS A. Work includes, but is not limited to, the following: 1. Architectural precast concrete sandwich wall panels. 2. Integral
More informationFS-DUO. Wastewater Flow Distributor Technical Data. Submittal Special Precautions Specifications Installation. (62.2 cm) (62.2 cm)
Wastewater Flow Distributor Technical Data Submittal Special Precautions Specifications Installation 24½" (62.2 cm) 12½" (31.8 cm) 24½" (62.2 cm) (30.5 cm) SUBMITTAL STANDARD: 4" plain end inlet/outlet
More informationTECHNICAL MANUAL. HPKM Column Shoe. Reliable Bolted Column Connections
TECHNICAL MANUAL Column Shoe Reliable Bolted Column Connections Version: PEIKKO GROUP 05/2014 Column Shoe For bolted column connections System benefits The stiff ness of Peikko s column connection is verifi
More informationCANADIAN MANUFACTURED PALLET RACKING OUR STRENGTH IS OUR PRODUCT ROLLFORMED RACK
NORTH AMERICAN STEEL CANADIAN MANUFACTURED PALLET RACKING OUR STRENGTH IS OUR PRODUCT ROLLFORMED RACK www.northamericansteel.ca RACK ASSEMBLY Drum Drum Cradle Banker Boxes Fork Entry Bar Skid Channel Roof
More informationSECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Welded stainless steel railing systems. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete; coordination with substrate.
More informationStandard Details for FAST TREAD Preformed Stairs
Standard Details for FAST TREAD Preformed Stairs REV.7 050517 1.1 FAST TREAD TYPICAL LANDING CONNECTION DETAIL Galvanised steel stringer Formwork setback dimension Concrete landing pour line Reinforcement
More informationStandard program overview fire doors
Fire doors Standard program overview fire doors Fire-resistant and fire-proof steel doors Product Dimensions in mm width/height (clear opening) Tested as fire-resistant door in acc. with DIN 4102 / EN
More informationConcrete Framing Systems - Walls and Columns
Concrete Framing Systems - Walls and Columns Casting a Concrete Wall Wall Footing Reinforcing Wall Forms Pouring Concrete Finishing the Concrete Controlling Cracking Insulating Concrete Forms (ICF) Tilt-Up
More informationHARVEY MUDD COLLEGE TEACHING AND LEARNING CENTER SECTION Page 1 of 6 VOIDED CONCRETE SLAB
030111 Page 1 of 6 PART 1 - GENERAL 1.1 SUMMARY A. This Section specifies: 1. Voided concrete floor and roof slab system consisting of structural reinforced concrete containing hollow (bubbles) spherical
More informationBitumen Softboard. Applications: Physical Properties: Jolly Bitulex Expansion Joint Fillers conform to the following required standards
Bitumen Softboard Jolly Bitulex Softboard is processed from cane fibre, the raw material tested and proven to provide the best resilience. Impregnated with Bitumen in various percentages, it is a perfect
More informationBOX TYPE RCC BUILDINGS USING ALUMINIUM WALL FORMS UPCOMING TREND FOR HIGH RISE BUILDINGS
BOX TYPE RCC BUILDINGS USING ALUMINIUM WALL FORMS UPCOMING TREND FOR HIGH RISE BUILDINGS Mr. Harish C. Ringe 1, Mr. Mahesh R. More 2, Miss. Amruta S. Shete 3 1,2, 3 Civil Engg. Department Csmss college
More informationCompression Test for Precast Encased Composite Columns with Corrugated Steel Tube
Compression Test for Precast Encased Composite Columns with Corrugated Steel Tube *Kwang-Won Jo 1) and Hong-Gun Park 2) 1), 2) Dept. of Architecture and Architectural Engineering, Seoul National Univ.,
More informationTECHNICAL MANUAL. SUMO Wall Shoe. For Bolted Wall Connections
TECHNICAL MANUAL Wall Shoe For Bolted Wall Connections Version: PEIKKO GROUP 11/2014 Wall Shoe For bolted wall connections System benefits Strong tensile connection: enables shear walls to be built of
More informationC. Concrete Inertia Bases: Drawings showing required concrete steel reinforcing, construction details, and dimensions.
15240 VIBRATION ISOLATION ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 230548 An optional keynote
More informationR-Group Finland Oy. RTA, RWTL and RWTS Lifting anchors Design instructions
R-Group Finland Oy RTA, RWTL and RWTS Lifting anchors Design instructions According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 28.12.2016 2 Table of contents 1 DESCRIPTION
More informationPolycrete Big Block Standard Specification
Polycrete Big Block Standard Specification SECTION 03 11 19 INSULATED CONCRETE FORMING 10/13 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent
More informationHANDSET WALL FORM. Handset Wall Form. Quick Assembly - can be built using only a hammer. Reduced weight increases productivity
HANDSET WALL FORM Quick Assembly - can be built using only a hammer Reduced weight increases productivity Unsurpassed flexibility in design and availability of panels for a wide variety of applications
More informationBARRIER BARRIER. quick installation. high quality collective side protection. ideal for escape routes. pleasing, unobtrusively design
BARRIER Guardrail systems EN The BARRIER fall protection system from provides many varied application options in collective side protection, because it has been designed in such a way that it can be optimally
More informationArcelorMittal Europe - Long Products Sections and Merchant Bars. Office Building ArcelorMittal in Esch Alzette
ArcelorMittal Europe - Long Products Sections and Merchant Bars Office Building ArcelorMittal in Esch Alzette Location the country, at the heart of the iron and steel region. It has good access to the
More informationConstruction. Hydrophilic, swellable hose for sealing construction joints in watertight structures. (formerly Sika Injectoflex HPM)
System Product Data Sheet Edition 06/12/2010 Identification no: 02 07 03 07 010 2 000099 (formerly Sika Injectoflex HPM) SikaFuko Swell 1 (formerly Sika Injectoflex HPM) Hydrophilic, swellable hose for
More informationProduct Data Sheet SikaFuko Swell-1 Positioning Description Uses Advantages Approval / Standards Construction Product Data Packaging
Product Data Sheet Version Nos.: 0414 SikaFuko Swell-1 Hydrophilic, swellable hose for sealing construction joints in watertight structures Construction Positioning Description Uses Swellable and injectable
More informationUnderground Exhaust System
Operation and Maintenance Manual Underground Exhaust MONOXIVENT - SOURCE CAPTURE SYSTEMS - info@ Oct. - 2015 Underground Duct Construction Standards 1. Dig trench depth to allow for minimum distance from
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.
More informationlindab we simplify construction LindabSandwichPanels Installation instructions Mineral Wool Panels
lindab we simplify construction LindabSandwichPanels Installation instructions Mineral Wool Panels Assembly instructions Handling Receiving of goods Check that the material has not been damaged in transit
More informationPrecast concrete structures
Precast concrete structures History of prefarication early 20.century 1904 concrete precast panels system in Liverpool (house.12 flats) 1907 hollow wall and slab panels for low-storey family houses 1926
More informationNORTH AMERICAN STEEL INNOVATIVE STORAGE SOLUTIONS OUR S T R E N G T H IS OUR PEOPLE AMERICAN TEARDROP RACK
NORTH AMERICAN STEEL INNOVATIVE STORAGE SOLUTIONS OUR S T R E N G T H IS OUR PEOPLE AMERICAN TEARDROP RACK AMERICAN TEARDROP American Teardrop racking (with its 2 adjustable and tapered locking connection)
More informationRAPID-EPS PATENT PENDING
SAFETY INSTRUCTIONS AND INSTALLATION GUIDE Rapid-Edge Protection Systems Document ref: MK 3 1108 Issue Date: Issued by:. Approved by: CONTENTS Safety instructions 3 Important 4 General 5 Product information..
More informationSECTION TILT-UP PRECAST CONCRETE SANDWICH PANELS. A. Work includes, but is not limited to, the following:
PART 1 GENERAL 1.01 SUMMARY SECTION 03460 TILT-UP PRECAST CONCRETE SANDWICH PANELS A. Work includes, but is not limited to, the following: 1. Architectural precast concrete sandwich wall panels. 2. Integral
More informationMethod of Measurement for Road Works Series MM Structural Concrete
Method of Measurement for Road Works Series MM 1700 - CC-RMP-01700 December 2013 CC Construction & Commissioning Standards TRANSPORT INFRASTRUCTURE IRELAND (TII) PUBLICATIONS About TII Transport Infrastructure
More informationTHE FORENSIC MEDICAL CENTER
THE FORENSIC MEDICAL CENTER Image courtesy of Gaudreau, Inc. TECHNICAL REPORT #2 OCTOBER 26, 2007 KEENAN YOHE STRUCTURAL OPTION DR. MEMARI FACULTY ADVISOR EXECUTIVE SUMMARY Image courtesy of Gaudreau,
More informationStandardised Foundation Bolt Kits
with cages Standardised Foundation Kits Over the last few years, eedi and the Australian Institute of Steel Construction, now the Australian Steel Institute [ASI], in a joint initiative, have worked to
More informationSTEEL STRUCTURAL SYSTEMS
STEEL STRUCTURAL SYSTEMS Steel elements are of two basic types: Structural steel shapes are formed into their final shapes by hot-rolling. This method produces such common elements as wide flange sections,
More informationTRITEC light Steel Panel Formwork
TRITEC light Steel Panel Formwork Perfection made in Germany Various practical illustrations of TRITEC Panel Combinations Guaranteed the largest possible range of sizes with the least possible amount of
More informationDESIGN OF PREFAB RC BUILDING USING EPS FOR DISASTER RESISTANCE
DESIGN OF PREFAB RC BUILDING USING EPS FOR DISASTER RESISTANCE S. Selvi Rajan CSIR-Structural Engineering Research Centre Chennai, India 11 March 2016 CSIR-CBRI Roorkee Engineering of prefab structures
More informationCIRCULAR COLUMN SK 100
CIRCULAR COLUMN SK 100 www.variant-factory.eu 1 2 VARIANT FACTORY LTD. CIRCULAR COLUMN SK 100 Contents GENERAL INSTRUCTIONS.....................................................................................
More informationTECHNICAL MANUAL. HPKM Column Shoe Reliable Bolted Column Connections. Version: PEIKKO GROUP ACI-M 01/2017 Designed according to ACI 318M-11
TECHNICAL MANUAL Column Shoe Reliable Bolted Column Connections Version: PEIKKO GROUP -M 01/2017 Designed according to 318M-11 Column Shoe For bolted column connections Full-Scale tested & approved connection
More informationConcrete Formwork Systems
Concrete Formwork Systems Victory Bear is proud to introduce K-FORM North America Proven by a decade of use in the United Kingdom, K-FORM is an all-in-one screed rail and concrete forming system. Simple
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationModcrete. Modcrete OVERVIEW COMPONENTS COMPONENTS
Modcrete OVERVIEW Modcrete COMPONENTS 7 > Modcrete is a fast, versatile and cost effective permanent formwork system for the construction of reinforced concrete filled structural walls for single and multi-storey
More informationZurn Z886. 6" Perma-Trench. Installation Instructions
Zurn Z886 6" Perma-Trench Installation Instructions Z886 Accessories 6" [152mm] Wide Trench Drain System Below are the components of the Z886 trench drain typical to an installation. Check your order to
More information