TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
|
|
- Ami Jennings
- 6 years ago
- Views:
Transcription
1 EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B
2 Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger than the associated rebar, sometimes referred to as a Bar Break connection) allowing a safe, reliable and efficient method of providing continuity of reinforcement through stop ends and element intersections. The adoption of a metric parallel thread on an enlarged bar diameter provides sufficient cross sectional area of material at the joint to outweigh the tensile capabilities of the equivalent diameter reinforcing bar. This attribute means the performance of the coupling at the joint can be ignored in any structural assessment, in turn this makes the adoption of the Terwa couplers over the standard detailed bars a simple exchange. The Terwa Parallel Threaded Coupler System has a full CARES Technical approval, this not only verifies the performance of the system in accordance with BS8110 and EC2 it also provides confidence that the components are manufactured and assembled in a fully audited ISO9001 facility. The female coupler (PSA) is supplied to the customer ready assembled on the reinforcing bar, the length of the bar is generally supplied as a full tension lap length in accordance with EC2, however, where the couplers are being used as a means of removing splicing laps the bars can be manufactured with any available and transportable length of reinforcing bar. There is no requirement for any threading of the corresponding male bars (TSE) as these are supplied prefabricated with the corresponding metric parallel thread. There are no specialist tools required to complete the connection, this can be carried out using a simple open jawed pipe wrench. Euro Accessories can supply a calibrated wrench to ensure the correct torque settings are achieved. Benefits 1 Full CARES Technical Approval. Simplifies shutter design. Reduces damage to formwork. Makes stripping shuttering system easier. Ideal for use in continuous pour processes and jump shutters. Eliminates the need for dangerous projecting reinforcement. No drilling of shuttering materials. Reduces the congestion of rebar at laps. Lack of congestion facilitates easier concrete placement, reducing the risk of voids. No post drilling of concrete in order to expoxy resin fix continuity bars. Provides a full bar strength coupling. Connection made utilising standard metric threads. Accelerates the production process. No requirement for thread cutting or assembling of products. Full tension lap bar lengths available from stock. Fabricated components can be bolted directly to the structure using standard metric threads. No specialist tools required. Increasing the diameter of the bar to cut the male thread. Swaging the female threaded sleeve onto the reinforcement steel.
3 Applications Stop ends. Stair landings. Cantilevered slabs. Vertical connections in columns. Column head connections. Wall intersections. Temporary openings in water retaining structures. Crane voids through slabs. Fixing points for additional steel structures and components. Provides reinforcement connections for future developments that may tie into the existing structure. Quality Assurance Manufactured by Terwa, PSA,TSE and PSC mechanical couplers have achieved accreditations as follows. TECHNICAL APPROVAL 50 TERWA Mobile Unit Can be placed on site to produce on site rebar connections. Any rebar length can be coupled. Utilises locally sourced reinforcement steel. Tested and certified accordance with domestic and international norms. KOMO EC Declaration of Conformity FS t
4 PSA Female Couplers Supplied as a straight reinforcement bar with sleeved and swaged female coupler body. Generally used in the first pour to allow subsequent addition of male continuity bar in the second pour. Can also be used in conjunction with nailing plates or threaded inserts to ease fixings to shutters. Standard Stock Sizes Product Code Length Thread Dimensions L M (Metric) A D Coupler Dimensions L1 d Reinforcement Steel Tensile Force (kn) Rated Section (mm 2 ) PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA This is the cast in part of the system, it comprises a socket swaged onto a high yield reinforcement bar. The socket area is larger than the bar ensuring that the bar itself is the weakest part of the coupler. Also available in Stainless Steel. 3
5 TSE Male Couplers Supplied as a straight male reinforcement bar, the threaded portion of the TSE is threaded into the exposed female section of the PSA once the shuttering has been removed. This provides the continuity reinforcement for the second pour. Standard Stock Sizes Product Code Length Thread Dimensions L M (Metric) A d Reinforcement Steel Tensile Force (kn) Rated Section (mm 2 ) TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE TSE Use PSA + PSC Connector for 40mm diameter reinforcement.(see next page) This is the screw in coupler. It has an enlarged threaded end to maximize the bar strength. t
6 PSC Threaded Connector PSC threaded connector is used for converting PSA couplers into males couplers. Product Code Description Thread Dimensions M (Metric) Lb Coupler Range Type Thread PSC016 PSC Bolt PSA M16 PSC020 PSC Bolt PSA M20 PSC024 PSC Bolt PSA M24 PSC030 PSC Bolt PSA M30 PSC042 PSC Bolt PSA M42 PSC048 PSC Bolt PSA M48 Instructions Place in and rotate the threaded PSC Bolt into the PSA Coupler already cast into the concrete. Mount the second PSA Coupler E P Rotate by hand the second PSA Coupler until the couplers are fastened together. The connection is finished by using a special torque wrench made by Terwa, to tighten the connection. The necessary torque for each type of rebar is shown in the table below. Reinforcement dia. Thread (M) Torque (Nm) TERWA Wrench (available on request) Product Code PSAWR Description Wrench 5
7 Cutting and Bending Service Euro Accessories also offer a Cutting & Bending service for the Terwa Coupler System. The production process is automated through the use of specialised machinery to enable high volume production. Benefits No bending required on site. Eliminates manual handling risks. No site wastage. Quick delivery times. Bent bars from 10mm up to 40mm. Examples PSAB1 PSAB2 TSEB1 TSEB2 PSAB3 TSEB3 Please specify dimensions required M, d, LA, LB and DB. Please specify angle of bend. t
8 Branches: Euro Accessories Ltd (Head Office) Units 1-3 Shannon Industrial Estate Lodge Road Sandbach Cheshire CW11 3HP t f Euro Accessories Ltd (Southern) Unit 3, Stewart Road Kingsland Business Park Basingstoke Hampshire RG24 8NF t f Euro Accessories Ltd (Ireland) Strokestown Road Roosky Co. Roscommon N41 XW59 Rep. of Ireland t Euro Accessories Product Range: Plastic, Concrete & Wire Spacers Slab Accessories Magnet Systems Cast-in Channel Precast Accessories Screed Rails MAX Rebar Systems Reinforcement Continuity Systems Formwork Systems & Accessories Piling Accessories Lifting & Fixing Systems Double Walling Accessories Chemicals & Sprayers BAG Column Formers
TERWA REBAR CONNECTION COUPLERS
TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger than the associated rebar, sometimes
More informationNON - DRILL Rapid Post System
EURO ACCESSORIES NON - DRILL Rapid Post System www.euroacc.co.uk Introduction: The Non-Drill Rapid Post System utilises the Euro Accessories Pin Anchor lifting system as a ready-made fixing point for fencing,
More informationCARES Technical Approval Report TA1-B 5058
CARES Technical Approval Report TA1-B 5058 Issue 3 Terwa PSA/TSE and PSA/PSC Standard couplers Assessment of the Terwa PSA/TSE and PSA/PSC Standard Coupler Product and Quality System for Production 5058
More informationCARES Technical Approval Report TA1-B 5040
CARES Technical Approval Report TA1-B 5040 Terwa PSA/TSE and PSA/PSE Standard couplers Assessment of the Terwa PSA/TSE and PSA/PSE Standard Coupler Product and Quality System for Production 5040 Product
More informationEUROACCESSORIES COLUMN FORMERS
EURO ACCESSORIES COLUMN FORMERS www.euroacc.co.uk Introduction: Euro Accessories are the sole distributors of the BAG Column Formers in the UK and Ireland. BAG have 15 years experience in the production
More informationTECHNICAL MANUAL. MODIX Rebar Coupler Safe and Flexible Rebar Coupling System
TECHNICAL MANUAL MODIX Rebar Coupler Safe and Flexible Rebar Coupling System Version: PEIKKO GROUP 01/2016 MODIX Rebar Couplers Safe and flexible rebar splicing system Reduces congestion of reinforcement
More informationCI/SfB (29) Et6. October Starter Bar System for the Construction Industry
CI/SfB (29) Et6 October 2007 Starter Bar System for the Construction Industry 2 ncon designs and manufactures high integrity steel products for the construction industry. Through continuous programmes
More informationContents. Company description. Company description 1 Product description 2 Reinforcement rebar Couplers 3
C A T A L O G U E Contents Company description 1 Product description 2 Reinforcement rebar Couplers 3 Features 4 Bartek Systems Coupler Dimensions 4 BARTEK SYSTEMS P Parallel rib peeling direct rolling
More informationBUILDING STRENGTH TAPER-LOCK REBAR THREADING SYSTEM CONCRETE CONSTRUCTION SOLUTIONS BROCHURE
BUILDING STRENGTH TPER-LOCK REBR THREDING SYSTEM CONCRETE CONSTRUCTION SOLUTIONS BROCHURE Taper-Lock Threading Machines The Next Generation of Rebar Threading Technology The Taper Lock Threading Machines
More informationPERFORM WITH PRECISION TAPER-LOCK REBAR THREADING SYSTEM CONCRETE CONSTRUCTION SOLUTIONS BROCHURE
TPER-LOCK REBR THREDING SYSTEM PERFORM WITH PRECISION CONCRETE CONSTRUCTION SOLUTIONS BROCHURE Taper-Lock Threading Machines The Next Generation of Rebar Threading Technology The Taper Lock Threading Machines
More informationCARES Technical Approval Report TA1-B 5061
CARES Technical Approval Report TA1-B 5061 Issue 1 B U I L D I N G P R O D U C T S Ancon KSN Anchors for Reinforcing Steel Assessment of the Ancon KSN Anchor Product and Quality System for Production 5061
More informationHIGH PERFORMANCE REINFORCEMENT PRODUCTS. Product Catalogue.
HIGH PERFORMANCE REINFORCEMENT PRODUCTS Product Catalogue www.hrc-europe.com HRC and its product philosophy The use of T-headed bars in concrete structures has some remarkable benefits compared to the
More informationTAPER THREADED GRIP-TWIST
TAPER THREADED GRIP-TWIST And Position Couplers MECHANICAL SPLICES FOR REINFORCED CONCRETE CONSTRUCTION PROJECTS Technical Data and Performance Review JULY 2003 BarSplice Products, Inc., 4900 Webster Street,
More informationGarage Beam System DAYTONSUPERIOR.COM FORMING. For Post-Tensioned Beam and Slab Parking Structures
Garage Beam System For Post-Tensioned Beam and Slab Parking Structures FORMING The Garage Beam System is a complete forming system designed specifically for post-tensioned beam and slab multi-story parking
More informationCARES Technical Approval Report TA1-B 5064
CARES Technical Approval Report TA1-B 5064 Issue 1 BARUS SimGrip Standard and Positional Parallel Threaded Couplers Assessment of the BARUS SimGrip Standard and Positional Parallel Thread Coupler Product
More informationCARES Technical Approval Report TA1C
CARES Technical Approval Report TA1C - 5003 Issue 3 January 2010 ERICO LENTON Mechanical Rebar Splicing System Assessment of the ERICO LENTON Taper Threaded Coupler Product, Sellafield Ltd type B Couplers
More informationTECHNICAL MANUAL. HPKM Column Shoe Reliable Bolted Column Connections. Version: PEIKKO GROUP ACI-M 01/2017 Designed according to ACI 318M-11
TECHNICAL MANUAL Column Shoe Reliable Bolted Column Connections Version: PEIKKO GROUP -M 01/2017 Designed according to 318M-11 Column Shoe For bolted column connections Full-Scale tested & approved connection
More informationArt Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" 1 of 10 Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 X-Chairs.. 4 Rod Spacers.. 4 Type-A. 5 Sand
More informationCARES Technical Approval Report TA1-B 5065
CARES Technical Approval Report TA1-B 5065 Issue 1 Terwa Alligator (ALC) Mechanical Coupler Assessment of the Terwa Alligator (ALC) Mechanical Coupler Product and Quality System for Production 5065 Product
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationCI/SfB Et6. September Stainless Steel Reinforcement for the Construction Industry
CI/SfB Et6 September 2012 Stainless Steel Reinforcement for the Construction Industry 2 2 Tel: 1300 304 320 www.ancon.com.au Ancon designs and manufactures high integrity steel products for the construction
More informationCivil Engineering Construction I (CBE5031)
Civil Engineering Construction I (CBE5031) Precast Concrete 1 Definition of Precast Concrete Precasting means casting a concrete member at a place other than where it will be used and then moving it to
More informationCARES Technical Approval Report TA1-B&C 5039
CARES Technical Approval Report TA1-B&C 5039 Issue 3 Armaturis Herisson Plus Standard and Positional Couplers Assessment of the Armaturis Herisson Plus Standard and Positional Couplers Product and Quality
More informationMechanical Rebar Splice Solutions
Mechanical Rebar Splice Solutions About BARUS LLC Why a Mechanical Splice? BARUS Product range SimGrip Upset Parallel System SimGrip System Equipments SimGrip Standart SimGrip LT SimGrip PS SimGrip Crossing
More informationCONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 905 APRIL 2007 CONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE TABLE OF CONTENTS 905.01 SCOPE 905.02 REFERENCES 905.03 DEFINITIONS
More informationR-Group Finland Oy. RTA, RWTL and RWTS Lifting anchors Design instructions
R-Group Finland Oy RTA, RWTL and RWTS Lifting anchors Design instructions According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 28.12.2016 2 Table of contents 1 DESCRIPTION
More informationRPA Plate Lifting Inserts Technical Manual
R-Group Finland Oy RPA Plate Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 13.7.2017 2 Table of Contents 1 DESCRIPTION OF THE
More informationMiller Collective Safety at Height Solutions EPIC ULTRA Barrier System EPIC Post-N-Barrier System EPIC Basic Barrier System
For over 65 years the Miller brand has been synonymous with personal fall protection products and services. As the global leader in safety at height solutions, Honeywell Safety Products introduces a new
More informationAmerican Metal Specialties, Inc.
American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best
More informationR-STEEL. RPK-N2, RPK-E2 Column shoes USER GUIDE
R-STEEL RPK-N2, RPK-E2 Column shoes USER GUIDE 12.6.2018 Contents 1. DESIGN APPROACH...3 2. MATERIALS AND DIMENSIONS...4 3. FABRICATION...5 3.1 Fabrication Method... 5 3.2 Quality Control... 5 3.3 Shoe
More informationSDG Euro Starter Packs type RSH meet the demands of a key profiled joint according to EC 2 (Eurocode 2: Design of Concrete Structures).
Euro Starter Pack Description SDG Euro Starter Packs consist of pre-bent reinforcement housed in a uniquely trapezoidal profiled corrosion resistant casing. The starter pack is then cast into the front
More informationHANDSET WALL FORM. Handset Wall Form. Quick Assembly - can be built using only a hammer. Reduced weight increases productivity
HANDSET WALL FORM Quick Assembly - can be built using only a hammer Reduced weight increases productivity Unsurpassed flexibility in design and availability of panels for a wide variety of applications
More informationTECHNICAL DESIGN AND INSTALLATION GUIDE THE COMPLETE ENGINEERED SOLUTION FOR TEMPORARY MOVEMENT JOINTS
TECHNICAL DESIGN AND INSTALLATION GUIDE THE COMPLETE ENGINEERED SOLUTION FOR TEMPORARY MOVEMENT JOINTS LOW COST, ECONOMICAL, TECHNICAL AND PRACTICAL SOLUTION. FULLY SEALED SYSTEM. FULLY GROUTED SYSTEM
More informationwww.fastformsystems.com info@fastformsystems.comm South Tel: 00 44 (0) 207 1481274 North Tel: 00 44 (0) 8456 171152 Fast-Form The Complete Formwork system Safer / Faster / Greener / Cheaper One system,
More informationInternational Version CI/SfB (29) Et6. June CXL Parallel Thread Couplers for the Construction Industry
International Version CI/SfB (29) Et6 June 2015 CXL Parallel Thread Couplers for the Construction Industry Reinforcing Bar Couplers Lapped joints are not always an appropriate means of connecting reinforcing
More informationTECHNICAL MANUAL. PEC Column Shoe. Heavy-duty Bolted Column Connections
TECHNICAL MANUAL PEC Column Shoe Heavy-duty Bolted Column Connections Version: PEIKKO GROUP 09/2018 PEC Column Shoe For bolted column connections Advanced casting process with the help of standard accessories
More informationCARES Technical Approval Report TA1-B 5054
CARES Technical Approval Report TA1-B 5054 Issue 1 Shanxi Taigang Stainless Steel Standard Couplers Assessment of the Shanxi Taigang Stainless Steel Standard Coupler Product and Quality System for Production
More informationSection REINFORCING STEEL
Section 03210 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and subsequent placing of reinforcing steel, deformed and smooth, chairs, ties, splicing devices, and other reinforcing accessory
More informationR-Group Finland Oy. REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 10.2.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
More informationPRODUCT DESIGN AND SELECTION GUIDE REVOLUTIONISING CONCRETE LIFTING
REVOLUTIONISING CONCRETE LIFTING PRODUCT DESIGN AND SELECTION GUIDE PRECAST CONCRETE, TILT WALL CONSTRUCTION, CIVIL ENGINEERING & DEMOLITION LIFTING SYSTEMS Contents Page Section 1.0 - Introduction Obelix
More informationA. Division 01: Administrative, procedural, and temporary work requirements apply to this section.
Copyright 2015 Metal Roof Innovations, Ltd. www.s-5.com SECTION 07 72 53 COLORGARD SNOW GUARDS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Snow guards for metal roofs. 2. [Non-penetrating] [Face
More informationSymons Soldier DAYTONSUPERIOR.COM FORMING. Versatile Soldier Beam System
Symons Soldier Versatile Soldier Beam System FORMING The Symons Soldier system is a lightweight, yet extremely strong, construction beam system that is adaptable to almost any forming or shoring configuration
More information-165 C / -265 F CRYOGENIC REBAR SPLICING SYSTEMS
-165 C / -265 F CRYOGENIC REAR SPLICING SYSTEMS Cryogenic Rebar Splicing Systems Cryogenic Rebar Splicing systems are an extension to the LENTON line of concrete reinforcement products available from Pentair.
More informationTILT-UP LIFTING PRODUCTS
TILT-UP LIFTING PRODUCTS 37 Super-Lift www.meadowburke.com 877-518-7665 STRONGBACKS When will they be needed? A. If a panel looks like it would fall over when standing up. The strongback acts as a crutch
More informationBROCHURE. Steel Forming System. A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. DAYTONSUPERIOR.
Max-A-Form Steel Forming System BROCHURE A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. DAYTONSUPERIOR.COM Max-A-Form System Design The Max-A-Form Forming
More informationReinforcement Couplers As An Alternative To Lap Splices: A Case Study
Reinforcement Couplers As An Alternative To Lap Splices: A Case Study Singh R. Department of Civil Engineering, Graphic Era University, Dehradun, Uttarakhand, INDIA Himanshu S. K. Department of Civil Engineering,
More informationOriginally Issued: 04/18/2014 Revised: 05/02/2018 Valid Through: 04/30/2019
DAYTON SUPERIOR CORPORATION MECHANICAL SPLICE SYSTEMS FOR STEEL REINFORCING BARS: BAR-LOCK TAPER-LOCK DB/DI CSI Section: 03 21 00 Reinforcing Steel 1.0 RECOGNITION The Dayton Superior Mechanical Splice
More informationRED T H E L I T T L E STEEL AND REINFORCING PRODUCTS FOR THE CONSTRUCTION INDUSTRY
T H E L I T T L E RED BOOK STEEL AND REINFORCING PRODUCTS FOR THE CONSTRUCTION INDUSTRY 01227 863770 sales@buildersbeams.co.uk INTRODUCTION Welcome to The Little Red Book from Builders Beams; your go-to
More informationFRANK Stremaform formwork elements
FRANK formwork elements technologies for the construction industry Applications Working joints working joints enable large structural elements to be formed in sections. The sequence of these working joints
More information1 Exam Prep Placing Reinforcing Bars Tabs and Highlights
1 Exam Prep Placing Reinforcing Bars Tabs and s These 1 Exam Prep Tabs are based on the CRSI Placing Reinforcing Bars Recommended Practices, 9 th Edition. Each 1 Exam Prep tabs sheet has five rows of tabs.
More information1D - THREADED LIFTING SYSTEMS
1D - THREADED LIFTING SYSTEMS WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING SYSTEMS THL THS1 THS3-HD TIL Page 38 Page 40 Page 42 Page 46
More informationSECTION DUALGARD SNOW GUARDS
Copyright 2016 Metal Roof Innovations, Ltd. www.s-5.com SECTION 07 72 53 DUALGARD SNOW GUARDS This section has been prepared by Metal Roof Innovations, Ltd. for use in the preparation of a project specification.
More informationFeatures Advantages Benefits
What is BoxBolt? A KEE SAFETY PRODUCT BoxBolt Guide - Eurocode 3 / DIN 18800 BOXBOLT is a fully tested and approved blind fixing solution for connecting to hollow section steelwork or where access is restricted
More informationMaterials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
More informationArt Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 Stackable Chair... 5 X-Chairs.. 7 Rod Spacers.. 8
More informationLifting Sockets. Flat Lifting Sockets
Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer
More informationLinkStudPSR. Specialists in Punching Shear Reinforcement
LinkStudPSR Specialists in Punching Shear Reinforcement A PSR system, manufactured & tested in-house, with full CARES certification, full traceability, comprehensive design manuals and batch testing for
More informationRapidBrace Installation Guide
RapidBrace Installation Guide RapidBrace cast-in Brace Anchor System enables structural bracing in early strength concrete. RapidBrace is cast-into the concrete floor and is ready to load in concrete with
More informationFeatures Advantages Benefits
What is BoxBolt? A KEE SAFETY PRODUCT BoxBolt Guide - Eurocode 3 / DIN 18800 BOXBOLT is a fully tested and approved blind fixing solution for connecting to hollow section steelwork or where access is restricted
More informationfischer Test Report Fixing Tests for Bison Hollow Core Slabs
fischer Test Report Fixing Tests for Bison Hollow Core Slabs Testing on Bison Hollow Core Slabs 1. Introduction Contents Test Parameters Bison Hollow Core Slab Information 2. Fixings Products Tested FISV
More informationRequirements for Measuring and Pricing of Structural Concrete
Requirements for Measuring and Pricing of Structural Concrete October 2016 TRANSPORT INFRASTRUCTURE IRELAND (TII) PUBLICATIONS About TII Transport Infrastructure Ireland (TII) is responsible for managing
More informationRacking Solutions for Timber Framed Buildings T-RS-UK Edition. +44 (0)
Racking Solutions for Timber Framed Buildings T-RS-UK 2014 Edition +44 (0) 1827 255 600 www.strongtie.co.uk Racking Solutions for Timber Framed Buildings About Simpson Strong-Tie For more than 50 years
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationCARES Technical Approval Report TA1-B 5053
CARES Technical Approval Report TA1-B 5053 Issue 3 Company Bartec Company Linxion Parallel Threaded Couplers Assessment of the Linxion Standard Type C and PI Parallel Threaded Coupler Product and Quality
More informationTECHNICAL MANUAL. HPKM Column Shoe. Reliable Bolted Column Connections
TECHNICAL MANUAL Column Shoe Reliable Bolted Column Connections Version: PEIKKO GROUP 05/2014 Column Shoe For bolted column connections System benefits The stiff ness of Peikko s column connection is verifi
More informationCONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 905 MAY 1994 CONSTRUCTION SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE 905.01 SCOPE 905.02 REFERENCES 905.03 DEFINITIONS TABLE OF CONTENTS 905.04
More informationCI/SfB. Xt6. May 2010 HALFEN KWIKASTRIP KT 10-EE HALFEN KWIKASTRIP CONCRETE CONCRETE
CI/SfB ay 2010 Xt6 HALFEN KWIKASTRIP HALFEN KWIKASTRIP CONCRETE CONCRETE KT 10-EE Halfen Kwikastrip reinforcement continuity strip Halfen Halfen Limited is a leading supplier of building fixings and components,
More information5.0 NUDURA PRODUCTS ON SITE STORAGE PACKAGING, UNIT ASSEMBLY, USAGE
5.0 NUDURA PRODUCTS ON SITE STORAGE PACKAGING, UNIT ASSEMBLY, USAGE NUDURA Inc. has one of the most complete lineups of products and accessories available today in the construction industry. NUDURA s Integrated
More informationThe Art of Construction and The Design. Direct, rebar chair.
The Art of Construction and The Design Direct, rebar chair. Prefabricated element, made out of a thin steel rebar with plastic tipped legs in order to prevent corrosion of the support area between the
More informationHRC 400 Series High Performance Reinforcement Couplers:
HIGH PERFORMANCE REINFORCEMENT PRODUCTS HRC 400 Series High Performance Reinforcement Couplers: Proven and documented quality Exceed all known requirements for reinforcement couplers General advantages
More informationSpecial Provision No. 109S17 June 2017
AMENDMENT TO OPSS 905, NOVEMBER 2014 Special Provision No. 109S17 June 2017 OPSS 905, November 2014 Construction Specification for Steel Reinforcement for Concrete is deleted in its entirety and replaced
More informationMETHOD STATEMENT for INSTALLATION OF MICROPILE
METHOD STATEMENT for INSTALLATION OF MICROPILE A. MATERIAL TO BE USED 1. Grout Grout shall be mixed from Ordinary Portland Cement and clean water free from harmful substances. Usage of other cement which
More informationFEATURES APPLICATIONS. Technical data sheet SSW - STEEL STRONG-WALL FOR TIMBER FRAME RACKING RESISTANCE.
The Steel Strong-Wall is a corrugated steel panel which is designed to be fixed directly to the concrete foundations of a building, within the external or internal wall, via a bolted connection. FEATURES
More informationA. Division 01: Administrative, procedural, and temporary work requirements apply to this section.
Copyright 2016 Metal Roof Innovations, Ltd. www.s-5.com SECTION 26 31 00.01 PHOTOVOLTAIC COLLECTOR ATTACHMENT SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Photovoltaic Collector Attachment
More informationMechanical Splicing Couplers for Reinforcement
MECHANICAL SPLICING SYSTEM 156 Mechanical Splicing Couplers for Reinforcement 1 M 2 Uday Sheth1, Dhruva Sheth2 Ishita Enterprises echanical Splice/Joint is the common terminology for the complete assembly
More informationLesson 7 REINFORCING CAGE. Version 1-1/
Lesson 7 REINFORCING CAGE 7-1 Version 1-1/15 7-1 Learning Outcomes Describe cage construction Determine the circumference of a shaft and rebar cage and calculate the required number of side spacers. Explain
More informationPost-tensioned Concrete Design PT Installation Guidance
Post-tensioned Concrete Design PT Installation Guidance Lee Maartensz Construction Manager - Structural Systems UK Ltd PT Installation Bonded Flat Slabs Installation 1 Flat Slabs Beam and Slab Installation
More informationDesign Guidance for TAB-Deck Composite Slabs using SMD Metal Decking reinforced with ArcelorMittal Steel Fibres
Design Guidance for TAB-Deck Composite Slabs using SMD Metal Decking reinforced with ArcelorMittal Steel Fibres Version 2 Revised October 2008 Design Guidance for TAB-Deck Composite Slabs using SMD Metal
More informationSECTION 415 REINFORCING FOR CONCRETE
SECTION 415 REINFORCING FOR CONCRETE Module 5 August 2018 Release 10, Module 5 1 Release 10, August 2018 5-1 415 1 Description Furnish and place steel and fiber reinforced polymer (FRP) reinforcing of
More informationG-FIRE GROOVED COUPLINGS
G-FIRE GROOVED COUPLINGS Figure 5 G-FIRE Rigid Page 5 Figure 5 Flexible Page GRINNELL are designed for grooved end pipe and are available in nominal sizes of 25mm (") to 3mm (2") including BS, and ISO
More informationBonner Bridge Replacement Update:
Bonner Bridge Replacement Update: Jerry D. Jennings, PE - NCDOT Division 1 Engineer Pablo A. Hernandez, - NCDOT Resident Engineer September 18, 2017 Bonner Bridge Replacement Timeline Refresher Bonner
More informationFrequently Asked Questions
Frequently Asked Questions Q1: What is a temporary horizontal lifeline system? A1: A temporary horizontal lifeline (HLL) system is a fall protection anchorage system designed to attach to a suitable anchor.
More informationPLEASE READ ENTIRE INSTRUCTION MANUAL BEFORE PROCEEDING!
INSTALLATION GUIDE This guide is intended to aide in the installation of Dura-Trench systems. There are many different applications and situations for the use of this product and the installation procedures
More informationSECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Welded stainless steel railing systems. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete; coordination with substrate.
More informationK. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.
DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:
More informationSUPERPLUS M8-M16. The undercut fixing system that does not require a special setting tool. FUNCTION BENEFITS
SUPERPLUS M8-M16 The undercut fixing system that does not require a special setting tool. FUNCTION Automatic self-undercutting. The unique design of the SUPERPLUS causes an undercut to be created when
More informationTECHNICAL MANUAL. PVL Connecting Loop. Wall Connecting Loop Box with Single Wire
TECHNICAL MANUAL PVL Connecting Loop Wall Connecting Loop Box with Single Wire Version: PEIKKO GROUP 11/2012 PVL Connecting Loop Single wire wall connecting loop Benefits of PVL Easy to install, individual
More informationPS 3000 Installation Manual Step-By-Step Procedures C.9. DOOR AND WINDOW OPENINGS C.9.1 PREPARE IN ADVANCE. C.9.2 VBUCK CONSTRUCTION.
C.9. DOOR AND WINDOW OPENINGS Openings for doors and windows are formed with bucks, or frames, which are constructed to the rough opening dimensions required for the doors and windows to be installed.
More informationTRITEC light Steel Panel Formwork
TRITEC light Steel Panel Formwork Perfection made in Germany Various practical illustrations of TRITEC Panel Combinations Guaranteed the largest possible range of sizes with the least possible amount of
More informationRAPID Column Formwork For the highest requirements on concrete surfaces and edge formation. Product Brochure Issue 10/2017
For the highest requirements on concrete surfaces and edge formation Product Brochure Issue 10/2017 Content System advantages 5 For the highest requirements on concrete surfaces and edge formation 8 For
More informationGrade Separation Systems. Single-Span Rail Bridge Construction Procedure. An innovation from art engineering inc.
Grade Separation Systems Single-Span Rail Bridge Construction Procedure An innovation from art engineering inc. GSS Single-Span Example Shown: An existing railroad grade crossing. Existing railroad Existing
More informationSafety Eyebolt Solutions
Y O U L L N E V E R B E B E T T E R P R O T E C T E D Safety Eyebolt Solutions CE Approved to PPE Directive SUITABLE FOR USE IN TENSION AND IN SHEAR COMPREHENSIVE RANGE OF EYEBOLTS AND ACCESSORIES 0194
More informationInterior Hangers. Application
Application Interior bridge deck hangers are typically fabricated using two heavy duty sheet metal end clips that have been electrically resistance welded to an appropriate sized wire or formed metal connecting
More informationREINFORCING STEEL. Delete every occurrence of ASTM A 706 and replace with AASHTO M 31, Type W.
July 1, 2018 REINFORCING STEEL The 2007 SCDOT Standard Specifications is amended as follows: Delete every occurrence of ASTM A 706 and replace with AASHTO M 31, Type W. Delete Subsection 703.2.1 in its
More informationINSTALLATION GUIDE PLEASE READ ENTIRE INSTRUCTION MANUAL BEFORE PROCEEDING!
DURA - TRENCH INSTALLATION GUIDE This guide is intended to aide in the installation of Dura-Trench systems. There are many different applications and situations for the use of this product and the installation
More informationUS Pool Lift Model #114 (Independence) Installation Guide
US Pool Lift Model #114 (Independence) Installation Guide This manual has been provided to assist with lift installation. For further assistance please contact your authorized US Pool Lift dealer. Toll
More informationOriginally Issued: 02/02/2009 Revised: 11/09/2017 Valid Through:02/28/2019
EVALUATION SUBJECT: LENTON Mechanical Splice System for Steel Reinforcing Bars In Concrete REPORT HOLDER: ERICO International Corporation 34600 Solon Road Solon, Ohio 44139 800 248-2677 www.erico.com mugalde@erico.com
More informationINDEX. introduction 4. access scaffolding 5. selflock system 16. wall system 17. column boxes 29. slab system 31. props 36. contact details 40
PRODUCT BROCHURE INDEX introduction 4 access scaffolding 5 selflock system 16 wall system 17 column boxes 29 slab system 31 props 36 contact details 40 INTRODUCTION Augusta Manufacturing was established
More informationFALSEWORK SOLUTIONS: SLAB SHORING SYSTEM - ROYALFRAME50 SERIES
ROYALFRAME50 SLAB SHORING SYSTEM ROYAL FRAME 50 ROYALframe50 is a lightweight, improved alternate formwork shoring frame. It has galvanised tube legs, each with a 51mm outside diameter and a safe work
More informationASSEMBLY INSTRUCTIONS RESIDENTIAL SOLUTION CROSSRAIL GROUND MOUNT SYSTEM USA
ASSEMBLY INSTRUCTIONS RESIDENTIAL SOLUTION CROSSRAIL GROUND MOUNT SYSTEM USA TABLE OF CONTENTS TABLE OF CONTENTS SAFETY REGULATIONS MATERIALS REQUIRED ASSEMBLY ENGINEERING DRAWINGS TERMS AND CONDITIONS
More information