Outdoor + Switchgear, Walk-in Equipment Buildings Low & Medium Voltage NEMA 3R

Size: px
Start display at page:

Download "Outdoor + Switchgear, Walk-in Equipment Buildings Low & Medium Voltage NEMA 3R"

Transcription

1 Outdoor + Switchgear, Walk-in Equipment Buildings Low & Medium Voltage NEMA 3R Product Brochure N. 36 th Street PROVIDING A COMPREHENSIVE Lafayette, IN North APPROACH 36 th Street, TO Lafayette, RELIABLE Indiana POWER Tel

2 1 Features & Benefits Low or Medium Voltage Paralleling, Distribution & Motor Control Applications Packaged in a modified and reinforced 20 foot or 40 foot ISO container, or in a custom equipment building to meet your exact needs. Walk-in switchgear isle is constructed as one piece of custom building or enclosure to simplify onsite installation. All equipment inside is factory installed and wired. Available with insulated walls, floor and ceiling. Optional aluminum diamond plate provides a safe, long lasting, easy to clean floor. Complete with internal lighting (AC and/or DC) and convenience receptacles. Heating and/or cooling units designed for its operating environment. Separate rooms when appropriate for the application (transformer compartment, etc.) Rugged, durable, weather resistant construction for the worlds harshest environments. Long life, no maintenance aluminum, insulated walls and ceiling. For operator safety and a finished look and feel, all internal wiring is run in enclosed ducts, or conduit. Utility metering compartments can be integrated in the switchgear. Configurable for a wide range of applications: o Automatic and/or manual generator paralleling switchgear. o AC or DC variable speed motor control. o Power distribution switchgear. Side, top or bottom cable entry and exit. o Power and control quick connect receptacles are available. Optional site control and monitoring: o Modbus serial or Ethernet communications. o SCADA computer systems. o Master control panels. 433 North 36th Street, Lafayette, Indiana Tel

3 2 Outdoor Walk-in Equipment Building Construction Insulation Walls and roof insulated to customer specifications Siding & Roofing Multi-Rib panels with a Kynar 500 finish Roof & Walls Galvanized steel structural frame engineered to building codes in your area Interior Wall 16GA Aluminum or as specified Personnel Doors Insulated steel doors with panic hardware and stainless steel hinges Floor ¼ steel plate with optional non-skid additive Optional Cutouts Cutouts in base plate for cable access Insulation Optional spray foam insulation in base Shipping Split Building can be split for shipping if required *HVAC Optional heating and cooling to meet customer specifications Exterior Doors Optional equipment access doors Base ASTM A36 structural steel members continually welded and engineered for lifting and placing building with equipment installed

4 3 ++ Outdoor Switchboards Low Voltage & Medium Voltage (Included NEMA 3R Roof Not Pictured) APT also offers medium voltage (bottom), combination low & medium voltage (middle), and low voltage (top) switchgear in an outdoor NEMA 3R non walk-in arrangement in a variety of colors

5 4 Outdoor Walk-in Equipment Buildings Low Voltage & Medium Voltage APT s outdoor walk-in switchgear offers a clean and safe work environment in an optional climate controlled aisle

6 5 ISO Container Based Switchgear

7 6 Dimensional Drawings Typical Dimensions & Layout of Low Voltage Outdoor Switchboards

8 7 Dimensional Drawings Typical Dimensions & Layout of Medium Voltage Outdoor Switchboards

9 1 18 Dimensional Drawings Typical Dimensions & Layout of Low Voltage Walk-in Building

10 9 Dimensional Drawings Typical Dimensions & Layout of Medium Voltage Walk-in Building

Power Zone Center. Your solution for power distribution and control systems

Power Zone Center. Your solution for power distribution and control systems Power Zone Center Your solution for power distribution and control systems The Strength of One Powerful When you need to install a new power distribution center in your facility, you need it done in fastest

More information

GE EQUIPMENT CENTERS APPLICATION CONSIDERATIONS

GE EQUIPMENT CENTERS APPLICATION CONSIDERATIONS g GE Electrical Distribution and Control General Electric Company 41 Woodford Avenue, Plainville, CT 06062 860 747-7111 GE EQUIPMENT CENTERS APPLICATION CONSIDERATIONS Introduction For many years the petro/chemical

More information

Power Electronics, Inc. Packaged Equipment Center Standard Construction and Design Features

Power Electronics, Inc. Packaged Equipment Center Standard Construction and Design Features DESIGN CRITERIA FOR STANDARD CONSTRUCTION: These standard design elements of the P.E.I. Power Equipment Center are utilized to meet the following design criteria per ASCE 7-05 as adopted by the IBC (International

More information

SECTION INTEGRATED POWER ASSEMBLY (IPA)

SECTION INTEGRATED POWER ASSEMBLY (IPA) INTEGRATED POWER ASSEMBLY (IPA) PART 1 GENERAL 1.01 1.02 1.03 SCOPE The specification covers requirements applicable to the provision of Integrated Power Assembly (IPA). The IPA shall be environmentally

More information

Equipment Specifications Low Voltage. Active Harmonic Filter

Equipment Specifications Low Voltage. Active Harmonic Filter Equipment Specifications Low Voltage Active Harmonic Filter 1.0 General Description This section contains the design standards, general equipment type and configuration, components, product description,

More information

Arc Resistant Switchgear & Integrated Factory Assembled Buildings

Arc Resistant Switchgear & Integrated Factory Assembled Buildings Arc Resistant Switchgear & Integrated Factory Assembled Buildings Factory Assembled Factory Pre-commissioned Fully Tested Arc Resistant Designs Proven Long Distance Transport Capability Five Days for Site

More information

Electrical Houses. Coordinated. Coordinated Electrical Houses Integrated Power Assemblies IPAs Contents

Electrical Houses. Coordinated. Coordinated Electrical Houses Integrated Power Assemblies IPAs Contents September 2011 Sheet 001 Coordinated.0-1 Electrical Houses Contents General Description............................................0-2 Technical Data Layout Dimensions..............................0-6

More information

Power Control Distribution Building (PCD) Technical Specification General Purpose (Non-Hazardous) Environment

Power Control Distribution Building (PCD) Technical Specification General Purpose (Non-Hazardous) Environment Power Control Distribution Building (PCD) Technical Specification PART I: GENERAL 1. Scope 1.1. The specification covers requirements applicable to the provision of power distribution centers (PCD) suitable

More information

INC Pre-Assembled Structures

INC Pre-Assembled Structures INC Pre-Assembled Structures Drop-In In-Place Noise Control Pre-Engineered Factory Finished High Performance Rugged Durability INC pre-assembled structures offer a high performance, cost-effective alternative

More information

SECTION PARK NON-SEGREGATED BUS SPECIFICATION

SECTION PARK NON-SEGREGATED BUS SPECIFICATION Page 1 of 5 SECTION ------- PARK NON-SEGREGATED BUS SPECIFICATION 1.0 SCOPE 1.1. This specification describes assemblies of 600V, 5Kv and 15Kv non-segregated bus duct, which will be installed indoors and

More information

Power Control Distribution Building (PCD) Technical Specification Corrosive Environment

Power Control Distribution Building (PCD) Technical Specification Corrosive Environment PART I - GENERAL 1. SCOPE 1.1. The specification covers requirements applicable to the provision of power distribution centers (PCD) suitable for installation in highly corrosive environments. The PCD

More information

STARRCO M O D U L A R O F F I C E S Y S T E M S S P A C E S O L U T I O N S F O R T O D A Y A N D T O M O R R O W

STARRCO M O D U L A R O F F I C E S Y S T E M S S P A C E S O L U T I O N S F O R T O D A Y A N D T O M O R R O W STARRCO M O D U L A R O F F I C E S Y S T E M S SPACE SOLUTIONS FOR TODAY W.W. Cannon, Inc. 2653 Brenner Dr. Dallas, TX 75220 Phone: 214-357-2846 Toll Free: 800-442-3061 Fax: 214-357-4576 www.wwcannon.com

More information

SECTION MOTOR CONTROL CENTER

SECTION MOTOR CONTROL CENTER SECTION 16445 MOTOR CONTROL CENTER PART 1 GENERAL 1.01 DESCRIPTION A. This section covers the contract item Motor Control Center (MCC). The contract item includes demolition and removal of existing MCC;

More information

Place & Connect Pumping Stations

Place & Connect Pumping Stations Place & Connect Pumping Stations Flo-Pak Integrated Municipal Pumping Systems www.pattersonpumps.com When Quality Matters Flo-Pak Municipal Packaged Pumping Systems Setting the Bar for Packaged Systems

More information

Moduline. Acoustic Enclosure System. Rugged Noise Control Structures Using Acoustically Rated & Field Proven Demountable Components

Moduline. Acoustic Enclosure System. Rugged Noise Control Structures Using Acoustically Rated & Field Proven Demountable Components Moduline Acoustic Enclosure System Rugged Noise Control Structures Using Acoustically Rated & Field Proven Demountable Components Lab certified acoustic ratings Broad range of performance levels 63 Hz

More information

Superior Pre-engineered Modular Systems

Superior Pre-engineered Modular Systems Superior Pre-engineered Modular Systems Revolutionizing Interior Construction WHEN CHANGE MEANS CONSTRUCTION. $ AND TIME EQUALS MONEY. With Starcco it s possible to efficiently manage your project because

More information

Electrical Houses. Coordinated. Coordinated Electrical Houses Integrated Power Assemblies IPAs Contents

Electrical Houses. Coordinated. Coordinated Electrical Houses Integrated Power Assemblies IPAs Contents Sheet 001 Coordinated.0-1 Electrical Houses Contents General Description............................................0-2 Technical Data Layout Dimensions..............................0-6 Specifications

More information

MANUFACTURING TECHNICAL INSTRUCTIONS SAFETY Subject: DESIGN, MAINTENANCE AND INSPECTION OF SECONDARY ELECTRICAL DISTRIBUTION SYSTEMS

MANUFACTURING TECHNICAL INSTRUCTIONS SAFETY Subject: DESIGN, MAINTENANCE AND INSPECTION OF SECONDARY ELECTRICAL DISTRIBUTION SYSTEMS DAIMLERCHRYSLER MANUFACTURING TECHNICAL INSTRUCTIONS SAFETY Subject: DESIGN, MAINTENANCE AND INSPECTION OF SECONDARY ELECTRICAL DISTRIBUTION SYSTEMS ISSUE DATE: 5/1/90 EFFECTIVE DATE: 2/4/92 REVIEW DATE:

More information

Noise Control. Commercial, Industrial, and Environmental Products and Solutions.

Noise Control. Commercial, Industrial, and Environmental Products and Solutions. Noise Control Commercial, Industrial, and Environmental Products and Solutions www.kineticsnoise.com Commercial Duct Silencers Kinetics Noise Control offers the design and engineering assistance to integrate

More information

CONTENTS. B. System Design and Performance Requirements

CONTENTS. B. System Design and Performance Requirements 16060 Grounding and Bonding This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or

More information

Power Control Distribution Building (PCD) Technical Specification Classified Environment

Power Control Distribution Building (PCD) Technical Specification Classified Environment PART I - GENERAL 1. SCOPE 1.1. The specification covers requirements applicable to the provision of power distribution centers (PCD) suitable for installation in classified (hazardous) environments. The

More information

PORTABLE ELECTRICAL SHELTERS

PORTABLE ELECTRICAL SHELTERS PORTABLE ELECTRICAL SHELTERS A WHOLE SOLUTION APPLICATION AREAS SYSTEM FEATURES VALUE PROPOSITION PROJECTS / REFERENCES A WHOLE SOLUTION APPLICATION AREAS SYSTEM FEATURES VALUE PROPOSITION PROJECTS /

More information

Important Considerations for Specifying MV Mining Switchgear Western Mining Electrical Association Edmonton, Canada June 13, 2008

Important Considerations for Specifying MV Mining Switchgear Western Mining Electrical Association Edmonton, Canada June 13, 2008 Important Considerations for Specifying MV Mining Switchgear Western Mining Electrical Association Edmonton, Canada June 13, 2008 (Above 1000V and up to 38kV for Surface Mining) Key Components of Specification:

More information

INDEX. Page SECTION 1.0: SCOPE Toronto Hydro Requirements Ontario Electrical Safety Code 1 SECTION 2.0: PURPOSE 1

INDEX. Page SECTION 1.0: SCOPE Toronto Hydro Requirements Ontario Electrical Safety Code 1 SECTION 2.0: PURPOSE 1 INDEX Page SECTION 1.0: SCOPE 1 1.1 Toronto Hydro Requirements 1 1.2 Ontario Electrical Safety Code 1 SECTION 2.0: PURPOSE 1 SECTION 3.0: DEFINITIONS AND THE INTERNATIONAL SYSTEM OF UNITS 1 3.1 Definitions

More information

1.0 Total Points % 2.1 Building Exterior Elements % 2.2 Accessibility % 2.3 Structural %

1.0 Total Points % 2.1 Building Exterior Elements % 2.2 Accessibility % 2.3 Structural % 8/11/ Building Rating System Percent Site: 1.0 Total 0 163 82% Building: 2.1 Building Exterior Elements 0 82 82% 2.2 Accessibility 0 92 92% 2.3 Structural 0 91 91% 2.4 Building Envelope 0 84 84% 2. Interior

More information

B. Accept materials on site in original factory packaging, labeled with manufacturer s identification.

B. Accept materials on site in original factory packaging, labeled with manufacturer s identification. SECTION 26 05 02 - BASIC ELECTRICAL REQUIREMENTS PART 1 - GENERAL 1.1 SUMMARY A. Work Included: Furnish all labor, material, services and skilled supervision necessary for the construction, erection, installation,

More information

SECTION FIELD PANELS

SECTION FIELD PANELS Stanford University Facilities Design Guidelines SECTION 25 14 23 FIELD PANELS PART 1 - GENERAL 1.1 SUMMARY A. This section includes control panel and enclosure requirements for building control systems.

More information

SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS

SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS INDIANA UNIVERSITY BIDDING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 (REVISED 2005) MINORITY,

More information

Standard Model Coolers, Freezers and Combination Cooler/Freezers In Stock for SAME DAY SHIPMENT

Standard Model Coolers, Freezers and Combination Cooler/Freezers In Stock for SAME DAY SHIPMENT NOR-LAKE, INCORPORATED 727 Second Street P.O. Box 248 Hudson, Wisconsin 54016 800-955-5253 715-386-2323 866-961-5253 Parts 800-388-5253 Service 715-386-4290 FAX www.norlake.com Kold Locker Walk-Ins Standard

More information

DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT

DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT TABLE OF CONTENTS INTRODUCTORY INFORMATION 00 00 10 Title Page 00 00 20 Table of Contents DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT Section 00 02 00 Notice to Bidders

More information

INSTALLATION MANUAL KOCH

INSTALLATION MANUAL KOCH INSTALLATION MANUAL KOCH TECHNICAL SYSTEMS GROUP PRE-FAB ACOUSTICAL/THERMAL PANELS AND ENCLOSURES GEORGE KOCH SONS, LLC TECHNICAL SYSTEMS GROUP 10 South Eleventh Avenue Evansville, Indiana 47744 812-465-9600

More information

MOBILE SUBSTATIONS TRAILER AND SKID. tgood.com. Energy, Fast!

MOBILE SUBSTATIONS TRAILER AND SKID. tgood.com. Energy, Fast! MOBILE SUBSTATIONS TRAILER AND SKID tgood.com Energy, Fast! Global leader in E-House and prefabricated substation solutions PRODUCT OVERVIEW Custom configurable skid-mounted and trailer-mounted designs.

More information

Power IT Compact Secondary Substations, CSS. Technical catalogue for sheet steel substations

Power IT Compact Secondary Substations, CSS. Technical catalogue for sheet steel substations Power IT Compact Secondary Substations, CSS Technical catalogue for sheet steel substations The New Standard for Individual Solutions The new CSS substations represent a unique concept, which is introducing

More information

SUGGESTED SPECIFICATION for Low Voltage (600V) Generator Paralleling Switchboard

SUGGESTED SPECIFICATION for Low Voltage (600V) Generator Paralleling Switchboard SUGGESTED SPECIFICATION for Low Voltage (600V) Generator Paralleling Switchboard PART 1 GENERAL 1.1 Scope A. The intent of this specification is to provide power control for the parallel operation of generator

More information

Integrated Power Assemblies - Electro/Centers

Integrated Power Assemblies - Electro/Centers Supersedes TD02300001E 12/02 Contents Integrated Power Assemblies Product Description.................................................................. 2 Integrated Power Assemblies Section View................................................

More information

Watercrest - Sand Hill - Columbia, SC TABLE OF CONTENTS PROCUREMENT AND CONTRACTING REQUIREMENTS

Watercrest - Sand Hill - Columbia, SC TABLE OF CONTENTS PROCUREMENT AND CONTRACTING REQUIREMENTS Watercrest - Sand Hill - Columbia, SC 00 0110-1 TABLE OF CONTENTS DIVISION 00 PROCUREMENT AND CONTRACTING REQUIREMENTS INTRODUCTORY INFORMATION Document 00 0101 Document 00 0110 Project Title Page CONTRACTING

More information

SECTION METAL-ENCLOSED BUS MEDIUM VOLTAGE

SECTION METAL-ENCLOSED BUS MEDIUM VOLTAGE METAL-ENCLOSED BUS MEDIUM VOLTAGE PART 1 GENERAL 1.01 1.02 1.03 1.04 1.05 SCOPE The Contractor shall furnish and install the equipment as specified herein and as shown on the contract drawings. The medium

More information

Packaged Systems Building Specification

Packaged Systems Building Specification Packaged Systems Building Specification Each building shall be supplied complete with all necessary components to form a complete building system, and all parts shall be new and free from all defects or

More information

VERTEX. different. Molded Fiberglass Composite Shelters

VERTEX. different. Molded Fiberglass Composite Shelters VERTEX Molded Fiberglass Composite Shelters different Vertex shelters are unique: joint-less molded fiberglass outer and inner shells with a foamed-in-place polyurethane foam core between, to produce the

More information

METAL ENCLOSED BUS SOLUTIONS

METAL ENCLOSED BUS SOLUTIONS METAL ENCLOSED BUS SOLUTIONS ABOUT TECHNIBUS Technibus, Inc is a global leader in the supply of metal enclosed bus systems operating for more than 50 years. Our products include Isolated Phase, Non-Segregated,

More information

A. Access doors and frames are part of an access door and frame allowance.

A. Access doors and frames are part of an access door and frame allowance. SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

a) Line and load compartments must be separated by a stable barrier.

a) Line and load compartments must be separated by a stable barrier. 1.00 GENERAL 1.01 The electric utility shall furnish and connect all meters, instrument transformers, test switches, and meter control wiring necessary to complete the meter installation. 1.02 The customer

More information

Whitley Shower Locker Toilet Facilities

Whitley Shower Locker Toilet Facilities Whitley Manufacturing Co., Inc. 201 W. First Street S. Whitley, IN 46787 Phone (260) 723-5131 Sales Fax (260) 723-6396 whitley@whitleyman.com Building Type Building Code Whitley Shower Locker Toilet Facilities

More information

Architect s Project Number of 5 Decentralized HVAC Equipment District Master Specs 2013 Edition

Architect s Project Number of 5 Decentralized HVAC Equipment District Master Specs 2013 Edition PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 23 81 00 DECENTRALIZED HVAC EQUIPMENT A. The other Contract Documents complement the requirements of this section. The General requirements apply to the work

More information

1.0 In addition to the requirements previously presented herein, each specification shall contain the following general information:

1.0 In addition to the requirements previously presented herein, each specification shall contain the following general information: SECTION 260500 - GENERAL REQUIREMENTS FOR ELECTRICAL 1.0 In addition to the requirements previously presented herein, each specification shall contain the following general information: A. Codes, Laws,

More information

ADDENDUM 2 - JULY 14, 2015

ADDENDUM 2 - JULY 14, 2015 7/9/2015 The Professional(s) of Record above has signed for the following specification sections: DIVISION 1 GENERAL REQUIREMENTS Section 01 10 00 Summary of Work Section 01 25 00 Substitution Procedures

More information

2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING

2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING 2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING E3305.3: now reads The space equal to the width and depth of the panelboard and extending

More information

N-SERIES: NTH2700 SPECIFICATIONS Tubular Composite Top Hung Sliding Door System

N-SERIES: NTH2700 SPECIFICATIONS Tubular Composite Top Hung Sliding Door System Version 5.22.13 N-SERIES: NTH2700 SPECIFICATIONS Tubular Composite Top Hung Sliding Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER

More information

Overbrook Theater / Fruenthal Foundation Art Center. 1.0 Total Points % 2.1 Building Exterior Elements %

Overbrook Theater / Fruenthal Foundation Art Center. 1.0 Total Points % 2.1 Building Exterior Elements % 8/13/ Building Rating System Percent Site: 1.0 Total 0 9 8 Building: 2.1 Building Exterior Elements 0 64 64% 2.2 Accessibility 0 66 66% 2.3 Structural 0 77 77% 2.4 Building Envelope 0 4 4% 2. Interior

More information

Vertical Aeroponic Portable Indoor Farms

Vertical Aeroponic Portable Indoor Farms Vertical Aeroponic Portable Indoor Farms Featuring Automated Rows For Easiest Operation Style: Leafy Green and Herb Grower Farm Specifications and Price List Superior Farm Equipment at Great Prices Contact

More information

ECOCASITA PLUS63. Drawings. Outside elevation example. Ground floor plan example. Page 1 of 27

ECOCASITA PLUS63. Drawings. Outside elevation example. Ground floor plan example. Page 1 of 27 ECOCASITA PLUS63 Drawings Outside elevation example Ground floor plan example Page 1 of 27 House Shell: High quality, environmentally friendly and affordable house made from Skintong. Outside walls: Inner

More information

1.0 Total Points % 2.1 Building Exterior Elements % 2.2 Accessibility % 2.3 Structural %

1.0 Total Points % 2.1 Building Exterior Elements % 2.2 Accessibility % 2.3 Structural % 8/11/ Building Rating System Percent Site: 1.0 Total 0 9 8 Building: 2.1 Building Exterior Elements 0 82 82% 2.2 Accessibility 0 82 82% 2.3 Structural 0 7 7% 2.4 Building Envelope 0 47 47% 2. Interior

More information

PHYSICAL BARRIERS MACHINE GUARDS ROBOTIC WORK CELLS PERIMETER OR AREAS GUARDS PHYSICAL BARRIERS

PHYSICAL BARRIERS MACHINE GUARDS ROBOTIC WORK CELLS PERIMETER OR AREAS GUARDS PHYSICAL BARRIERS PHYSICAL BARRIERS MACHINE GUARDS ROBOTIC WORK CELLS PERIMETER OR AREAS GUARDS PHYSICAL BARRIERS Quick-Ship Ships in 48 Hours The 6-2 Guard System Our barriers are a reliable, versatile, and economical

More information

LTH3700, HOLLOW METAL SLIDING FIRE DOOR

LTH3700, HOLLOW METAL SLIDING FIRE DOOR LTH3700, HOLLOW METAL SLIDING FIRE DOOR Consult Manufacturer for additional options or modifications PART 1-GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General

More information

Details of technical leaflets/write-up on various pieces of equipment.

Details of technical leaflets/write-up on various pieces of equipment. Details of technical leaflets/write-up on various pieces of equipment. (1) Insulator Designs: The insulators are provided in one, two, three, or four insulator designs per location and spaced to provide

More information

Vertical Aeroponic Portable Indoor Farms

Vertical Aeroponic Portable Indoor Farms Vertical Aeroponic Portable Indoor Farms Featuring Automated Rows For Easiest Operation Style: Leafy Green and Herb Grower Farm Specifications and Price List Superior Farm Equipment at Great Prices Contact

More information

DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT

DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT TABLE OF CONTENTS INTRODUCTORY INFORMATION Section 00 00 10 Title Page 00 00 20 Table of Contents DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT Section 00 02 00 Invitation

More information

SECTION ENCLOSED BUS ASSEMBLIES

SECTION ENCLOSED BUS ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the

More information

1.0 Total Points % 2.1 Building Exterior Elements % 2.2 Accessibility % 2.3 Structural %

1.0 Total Points % 2.1 Building Exterior Elements % 2.2 Accessibility % 2.3 Structural % BartelsRode Gymnasium 8/11/ Building Rating System Percent Site: 1.0 Total 0 13 77% Building: 2.1 Building Exterior Elements 0 8 8% 2.2 Accessibility 0 74 74% 2.3 Structural 0 76 76% 2.4 Building Envelope

More information

VOLUME 4 DIVISION SPECIFICATIONS

VOLUME 4 DIVISION SPECIFICATIONS Page 1 Section Title Consultant Pages VOLUME 4 DIVISION 00-01 SPECIFICATIONS Division 00 - Procurement and Contracting Requirements 00 01 07 SEALS PAGE All 5 00 01 11r6 TABLE OF CONTENTS All 7 00 21 13r1

More information

Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner

Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional

More information

SECTION to 5000 AMPERE PLUG-IN AND FEEDER BUSWAYS - SPECTRA. A. Low-Voltage Plug-in Busway to 5000 ampere, 600 VAC

SECTION to 5000 AMPERE PLUG-IN AND FEEDER BUSWAYS - SPECTRA. A. Low-Voltage Plug-in Busway to 5000 ampere, 600 VAC PART 1 GENERAL A. The requirements of the Contract, Division 1, and Division 16 apply to work in this Section. 1.01 SECTION INCLUDES A. Low-Voltage Plug-in Busway - 225 to 5000 ampere, 600 VAC 1.02 RELATED

More information

EXTRA DURABILITY BY DESIGN TO LOWER YOUR LIFECYCLE COST

EXTRA DURABILITY BY DESIGN TO LOWER YOUR LIFECYCLE COST EXTRA DURABILITY BY DESIGN TO LOWER YOUR LIFECYCLE COST With maximized strength-to-weight ratio, Kidron s Emperor G2 trailer introduces a new generation of food service distribution advantages, uniquely

More information

Power IT Compact Secondary Substations, CSS. Technical Brochure

Power IT Compact Secondary Substations, CSS. Technical Brochure Power IT Compact Secondary Substations, CSS Technical Brochure Substations from ABB Content Definitions In accordance with the EN 61330 standard, Prefabricated Secondary Substations are defined as substations

More information

High Light. Motors are fully submersible Pumps can handle up to 2 spherical solids Indoor and outdoor installation Easy installation and removal

High Light. Motors are fully submersible Pumps can handle up to 2 spherical solids Indoor and outdoor installation Easy installation and removal High Light Motors are fully submersible Pumps can handle up to 2 spherical solids Indoor and outdoor installation Easy installation and removal For sump and rain water Control system available Fiberglass

More information

A new market trend. E-House. Make the most of your energy

A new market trend. E-House. Make the most of your energy A new market trend E-House Make the most of your energy An optimized solution realized in an industrial process 02 E - House The Electrical House (E-House) is a factory integrated, tested, validated, compact

More information

SECTION PRE-ENGINEERED MEMBRANE STRUCTURE

SECTION PRE-ENGINEERED MEMBRANE STRUCTURE SECTION 13125 PART 1 - GENERAL 1.1 SUMMARY A. Section includes the design, engineering, fabrication and erection of a frame-supported, tensilemembrane structure complete with entrance and exit doors and

More information

SECTION PART 1 GENERAL

SECTION PART 1 GENERAL SECTION 16060 GROUNDING AND BONDING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Grounding of electrical systems and equipment and basic requirements for ground for equipment, circuits, and systems.

More information

Permit Application Commercial / Industrial / Multi-Family BUILDING, ELECTRICAL, MECHANICAL, PLUMBING, BUILDING SEWER & WATER SERVICE

Permit Application Commercial / Industrial / Multi-Family BUILDING, ELECTRICAL, MECHANICAL, PLUMBING, BUILDING SEWER & WATER SERVICE STAFF USE ONLY RECEIVED BY: DATE: Permit Application Commercial / Industrial / Multi-Family BUILDING, ELECTRICAL, MECHANICAL, PLUMBING, BUILDING SEWER & WATER SERVICE Applicant must complete numbered items

More information

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION

More information

"SRMZ" ROOFTOP PACKAGED MULTIZONE UNITS Self Contained Single Package Units 17.5 to 43 Ton Cooling Capacities

SRMZ ROOFTOP PACKAGED MULTIZONE UNITS Self Contained Single Package Units 17.5 to 43 Ton Cooling Capacities "SRMZ" ROOFTOP PACKAGED MULTIZONE UNITS Self Contained Single Package Units 17.5 to 43 Ton Cooling Capacities Packaged Rooftop Multizone shall be Spinnaker Industries Inc. Model Series SRMZ. Units shall

More information

DIVISION MEDIUM VOLTAGE VAULT DESIGN Contents

DIVISION MEDIUM VOLTAGE VAULT DESIGN Contents DIVISION 13 00 60 - MEDIUM VOLTAGE VAULT DESIGN Contents 13 00 60 - MEDIUM VOLTAGE VAULT DESIGN... 2 DIVISION 13 00 60 LIST OF FIGURES... 6 Page 1 of 6 13 00 60 - MEDIUM VOLTAGE VAULT DESIGN 1. General

More information

SIEMENS. Instructions. Outdoor Metal Clad Switchgear. Installation Assembly OGM&SGM SG kV and 15kV. www. ElectricalPartManuals.

SIEMENS. Instructions. Outdoor Metal Clad Switchgear. Installation Assembly OGM&SGM SG kV and 15kV. www. ElectricalPartManuals. SIEMENS Outdoor Metal Clad Switchgear 5kV and 15kV Instructions Installation Assembly OGM&SGM SG 3258-00 THIS EQUIPMENT CONTAINS HAZARDOUS VOLTAGES. SEVERE PERSONAL INJURY OR PROPERTY DAMAGE CAN RESULT

More information

Division 00 Procurement and Contracting Requirements

Division 00 Procurement and Contracting Requirements SECTION 00 01 10 TABLE OF CONTENTS Division SECTION NO. VOLUME ONE Title SECTION TITLE Division 00 Procurement and Contracting Requirements 00 11 00 Invitation to Bidders 00 21 00 Instructions to Bidders

More information

INTRODUCTION MOBILE OFFICES

INTRODUCTION MOBILE OFFICES PRODUCT CATALOG INTRODUCTION................. 04 MOBILE OFFICES Models MO208 and MO248............. 05 Model MO328............................ 06 Model MO3610........................... 07 Models MO4410

More information

Built to Order. Stile. Frames. Section Contents. Profiles. Elevations. Double Egress Frames Pocket Frames

Built to Order. Stile. Frames. Section Contents. Profiles. Elevations.  Double Egress Frames Pocket Frames Frames Section Contents General Frame Construction Profiles F-1.0 Typical Jamb & Sill Profiles F-2.0-2.1 Frame Welding Elevations F-3.0 Frame Elevations F-4.0-4.2 Custom Frame Elevations Panel Types +

More information

SECTION AWNINGS

SECTION AWNINGS SECTION 10 73 13 AWNINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Fixed metal awnings. 1.2 DEFINITIONS A. Awning: An architectural projection that provides weather protection,

More information

SECTION DUMBWAITERS

SECTION DUMBWAITERS Ascent Dumbwaiter SECTION 14100 DUMBWAITERS PART 1 GENERAL 1.01 SUMMARY A. The product described herein, manufactured by Summit Lifts, Inc., is a dumbwaiter designed and dimensioned to provide material

More information

Specifications for RM Products Ltd. Pre-Assembled & Unassembled Fiberglass Buildings

Specifications for RM Products Ltd. Pre-Assembled & Unassembled Fiberglass Buildings Phone (705) 326-5580 Fax (705) 326-3646 www.rmfiberglass.com sales@rmfiberglass.com Specifications for RM Products Ltd Pre-Assembled & Unassembled Fiberglass Buildings GENERAL SCOPE: This specification

More information

POWER BOX ENCLOSURES. Product Catalog June 2017

POWER BOX ENCLOSURES. Product Catalog June 2017 POWER BOX ENCLOSURES TM Product Catalog June 2017 CUSTOM ENCLOSURES PROVIDE SUPERIOR PROTECTION FOR ELECTRICAL EQUIPMENT IN OUTDOOR APPLICATIONS Power Box Enclosures are custom designed for pole, pad or

More information

L-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System

L-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System Version 5.22.13 L-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER

More information

Coordinated Outdoor Houses Electro/Centers

Coordinated Outdoor Houses Electro/Centers New Information Technical Data Effective: August 1999 Page 1 Coordinated Outdoor Houses Quality Products in a Single Enclosure at a Lower Installed Cost We invented the concept of grouping electrical distribution

More information

A. Provide and install a factory made, wood framed, storage building. B. Building Construction Type: IBC Type V-B Wood Frame.

A. Provide and install a factory made, wood framed, storage building. B. Building Construction Type: IBC Type V-B Wood Frame. Farmington, Missouri Project Number M1801-0l PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide and install a factory made, wood framed, storage building. B. Building Construction Type: IBC Type V-B Wood

More information

New Main Hospital, Site Park, and Underground Garage Construction Progress Update #16

New Main Hospital, Site Park, and Underground Garage Construction Progress Update #16 New Main Hospital, Site Park, and Underground Garage Construction Progress Update #16 Date: March 1, 2010 From: Gary Claar Engineering Services 355-1660 Gary.Claar@NationwideChildrens.org More and more

More information

Permit Application Commercial / Industrial / Mutli-Family BUILDING, ELECTRICAL, MECHANICAL, PLUMBING, BUILDING SEWER & WATER SERVICE (Form #2)

Permit Application Commercial / Industrial / Mutli-Family BUILDING, ELECTRICAL, MECHANICAL, PLUMBING, BUILDING SEWER & WATER SERVICE (Form #2) STAFF USE ONLY RECEIVED BY: DATE: Permit Application Commercial / Industrial / Mutli-Family BUILDING, ELECTRICAL, MECHANICAL, PLUMBING, BUILDING SEWER & WATER SERVICE (Form #2) Applicant must complete

More information

Phone Toll-Free Fax

Phone Toll-Free Fax FRP Manufacturing (2010) Inc. builds quality fiberglass products. We manufacture a wide range of custom storage tanks as well as a variety of standard model above-and-below ground tanks with capacities

More information

MODULAR COLD STORAGE SPACE. USS John Stennis DESIGN CONSTRUCTION HARDWARE FEATURES OPTIONS

MODULAR COLD STORAGE SPACE. USS John Stennis DESIGN CONSTRUCTION HARDWARE FEATURES OPTIONS MODULAR COLD STORAGE SPACE DESIGN Designed and created by Cospolich to meet the demand for large cold-storage spaces, our walk-in offers many advantages, even in situations that present installation and

More information

1. Section , Gas and Vacuum systems for Laboratory and Healthcare Facilities

1. Section , Gas and Vacuum systems for Laboratory and Healthcare Facilities PART 1 - GENERAL 1.01 SUMMARY A. Section Includes 1. Pre-Fabricated Modular Futrus Headwall System a. Futrus Headwall as detailed on the drawings, including related components and accessories required

More information

ASSE International Product (Seal) Listing Program. ASSE Outdoor Enclosures for Fluid Conveying Components

ASSE International Product (Seal) Listing Program. ASSE Outdoor Enclosures for Fluid Conveying Components ASSE International Product (Seal) Listing Program ASSE 1060-2017 Outdoor Enclosures for Fluid Conveying Components Manufacturer: Contact Person: E-mail: Address: Laboratory: Laboratory File Number: Model

More information

AUTOMATIC VERTICALLY RETRACTABLE Skyfold Mirage ACOUSTIC INTERIOR GLASS WALL Section Page 1 October 2017

AUTOMATIC VERTICALLY RETRACTABLE Skyfold Mirage ACOUSTIC INTERIOR GLASS WALL Section Page 1 October 2017 Page 1 PART 1: GENERAL 1.01 Related Documents: A. All applicable provisions of the Bidding and Contract Requirements, and Division 1 - General Requirements shall govern the work under this section. 1.02

More information

SECTION ENCLOSED BUS ASSEMBLIES

SECTION ENCLOSED BUS ASSEMBLIES SECTION 262500 ENCLOSED BUS ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Utility Cabinet System (UCS)

Utility Cabinet System (UCS) (UCS) The Ultimate in Stainless Steel Modular Walls UCS: Eliminates the need and the costs of constructing a traditional wall Provides easier access and faster installation of the utilities compared to

More information

The exterior skin of the enclosure shall be manufactured from thick H32 aluminum which has been powder coated with polyester powder.

The exterior skin of the enclosure shall be manufactured from thick H32 aluminum which has been powder coated with polyester powder. 2.01 -- MATERIAL OF FABRICATION A. EXTERIOR SKIN: 1. MILL FINISH EXTERIOR SKIN: The exterior skin of the enclosure shall be fabricated from 0.050 thick or 0.125 thick 5052-H32 marine grade mill finish

More information

SECTION FIBERGLASS REINFORCED PLASTIC (FRP) ENCLOSURE

SECTION FIBERGLASS REINFORCED PLASTIC (FRP) ENCLOSURE SECTION 13121 FIBERGLASS REINFORCED PLASTIC (FRP) ENCLOSURE PART 1 - GENERAL 1.01 SUMMARY A. This section covers materials and accessories for provision of a pre-engineered fiberglass reinforced plastic

More information

City of Omaha Plans and Permits Commercial Alterations and Conversions Building Permit Submittal Checklist

City of Omaha Plans and Permits Commercial Alterations and Conversions Building Permit Submittal Checklist City of Omaha Plans and Permits Commercial Alterations and Conversions Building Permit Submittal Checklist This checklist contains the standard information required on submittals for commercial construction

More information

OPERATING PROCEDURE NO. 310

OPERATING PROCEDURE NO. 310 OPERATING PROCEDURE NO. 310 Related Operating Procedures: 310A; 310B; 310C; 310D SUBJECT: Conditions of Service Issued: February 10, 2014 Revised: March 28, 2016 OBJECTIVE: To establish the rules, regulations

More information

Section BUILDINGS, SHELTERS, ENCLOSURES

Section BUILDINGS, SHELTERS, ENCLOSURES Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices

More information

CLCF Climate Changer for comfort applications. Next generation air handling performance from Trane

CLCF Climate Changer for comfort applications. Next generation air handling performance from Trane CLCF Climate Changer for comfort applications Next generation air handling performance from Trane Customized performance and maximum comfort at minimum cost For many years Trane has been a global leader

More information

B. Provide equipment complying with this specification and manufactured by one of the following:

B. Provide equipment complying with this specification and manufactured by one of the following: SECTION 230910 PAINT SPRAY BOOTH PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Provide Paint Spray Booth, Prep Booth and Paint Mix Room, and associated ventilation equipment, complying with the

More information

SECTION SECONDARY UNIT SUBSTATIONS

SECTION SECONDARY UNIT SUBSTATIONS SECTION 26 12 16 SECONDARY UNIT SUBSTATIONS PART 1 GENERAL 1.1 SUMMARY This section describes metal-clad, indoor or outdoor, secondary unit substations with integral primary fused disconnect switches,

More information