GRC Teknoloji. Seismic Isolation Table Model TSD. for server computers and other vital devices

Transcription

1 for server computers and other vital devices Seismic Isolation Table Model TSD To help ensure business continuity when earthquakes strike

2 Cable wiring port 1 Trigger-A attachment

3 Seismic Isolation Table_TSD ties and artworks threat to statuary and other artwork of historithe danger of toppling in an earthquake. The smic Isolation Tables Model TSD is a highly eventive measure. ooden god of a national uin temple, Japan) nstruments TSD-1000 "Warrior of Capestrano" Naples National Archaeological Museum, Italy. onsiderable time can be lost waiting for repairs TSD are easily installed and offer highly effective nuity. TSD-1000: Microscope. 2

4 Structure Connector bars Cable-protecting V zone LM Guide Lower table Position-restoring spring Upper table Mounted cable supports Sample configurations Free-access floor Mounting pedestal Multiple connected tables

5 Seismic Isolation Table_TSD Required clearance Vibration tests Southern Hyogo Prefecture Earthquake (monitored at Kobe Marine Observatory), 800kg load East-west orientation Niigata Prefecture Chuetsu Earthquake (monitored at Ojiya), 800kg load North-south orientation East-west orientation North-south orientation

6 Seismic Isolation Table Model TSD: Technical data Model TSD-450 Basic type TSD-400 Dimensions (W) 450 (D) 80 (H) 400 (W) 1,000 (D) 90 (H) Seismic isolation effect Acceleration of 0.2G or less in response to input acceleration of 0.8G Maximum displacement Load 30kg - 100kg ±200mm on x - y axis 50kg - 150kg Orientation Horizontal Table weight 20kg 45kg *For loads exceeding 800kg, please consult THK , Standard accessories Optional accessories Trigger for TSD (stadby lock mechanism) 1 Instruction manual 2 Rubber mats 3 Marking tape 4 Wire (sleeves included) 5 Hex. bolts, washers 6 Cable supports (set screws included) 7 Hex. wrenches Note: TSD-450 comes with accessories 1 and 3 only. TSD-400 comes with accessories 1 though 5 only. Consult the manual for instructions on using accessories. Trigger-A Trigger-B Trigger-A, Trigger-B Both types unlock in response to seismic motion. Either type can be attached to a table already in place (excluding the TSD-450). Trigger-A is designed for repeated use; at least two must be attached. Trigger-A is relocked manually after the table has completed its motion. Trigger-B, made of plastic, is designed for one-time use only. At least four must be attached, all of which must be replaced with new locks after the table has completed its motion. Note: The optimal number of locks is determined by the weight of the load please consult THK for further details.

7 Seismic Isolation Table_TSD THK offers four types of Seismic Isolation Tables Model TSD for a variety of applications. Additional modules can be added to the TSD-1000 and TSD-1200 for expanded coverage, and the pitch between modules can be adjusted as needed. 1, ,000 Connecting type TSD-1000 TSD ,000 (W) 1,000 (D) 90 (H) 1,200 (W) 1,190 (D) 90 (H) (for TSD-450, input acceleration of 0.5G) (for TSD-450, ±150mm) 300kg - 1,200kg* 90kg 110kg 90 1, , Connecting modules: TSD-1000 and TSD-1200 With TSD-1000 and TSD 1200, more modules can be added to accommodate larger loads. The pitch between modules can be adjusted in 50mm increments within a range of 200 to 400mm. Consult THK for details on congurations for dimensions other than those shown above. Model Number Coding: Model number Number of modules (if 2, this sufx is omitted) Pitch between modules Pitch between modules Pitch between modules Module

8 Seismic Isolation Table Model TSD Safety precautions Warranty Use of Seismic Isolation Tables Please read the instruction manual carefully before using the Seismic Isolation Table. Do not dismantle or attempt to modify the Seismic Isolation Table. Any such action could cause the table to malfunction. Seismic Isolation Tables are designed for indoor use only. Setup To prevent the possibility of injury during an earthquake, make sure there are no objects within the table's range of motion (the maximum displacement stated in the catalog) and that all personnel stay clear as well. To ensure proper performance, make sure the table load is within the weight range stated in the catalog. Do not load the table with any object that has a high center of gravity or that would topple if pushed. For proper seismic isolation, the table must be placed on a level, even surface; placement on a slanted or uneven surface could cause misalignment, undue strain or irregular movement. When dealing with slanted or uneven surfaces, please obtain professional assistance or consult your local distributor. Position the load so that its center of gravity is situated over the center of the table. Improper positioning of a load or loading of objects that are outside the stated weight range could result in an unstable load and adversely affect the table or its load. Make sure the table is locked in place with the anchoring hardware before loading any object onto it. Make sure the table is locked before operating any device loaded onto the table. During an earthquake If a seismic tremor occurs, move away from the seismic isolation table immediately to prevent any possibility of injury through accidental contact with the moving table. If an earthquake of intensity-level 6 or greater (on the Japanese scale) occurs, review the post-setup checklist in the instruction manual following the earthquake and follow the directions provided. NORTH AMERICA THK America,Inc. HEADQUARTERS Phone: Fax: CHICAGO OFFICE Phone: Fax: NORTH EAST OFFICE Phone: Fax: ATLANTA OFFICE Phone: Fax: LOS ANGELES OFFICE Phone: Fax: SAN FRANCISCO OFFICE Phone: Fax: DETROIT OFFICE Phone: Fax: TORONTO OFFICE Phone: Fax: SOUTH AMERICA THK BRAZIL INDUSTRIA E COMERCIO LTDA. Phone: Fax: EUROPE THK GmbH EUROPEAN HEADQUARTERS Phone: Fax: DÜSSELDORF OFFICE Phone: Fax: STUTTGART OFFICE Phone: Fax: U.K. OFFICE Phone: Fax: ITALY OFFICE Phone: Fax: Head Office Nishigotanda, Shinagawa-ku, Tokyo JAPAN International Sales Department Phone: Fax: Global site : SWEDEN OFFICE Phone: Fax: AUSTRIA OFFICE Phone: Fax: SPAIN OFFICE Phone: Fax: TURKEY OFFICE Phone: Fax: PRAGUE OFFICE Phone: Fax: MOSCOW OFFICE Phone: Fax: THK Europe B.V. EINDHOVEN OFFICE Phone: Fax: THK France S.A.S. PARIS OFFICE Phone: Fax: CHINA THK (CHINA) CO.,LTD. HEADQUARTERS Phone: Fax: SHANGHAI OFFICE Phone: Fax: BEIJING OFFICE Phone: Fax: CHENGDU OFFICE Phone: Fax: GUANGZHOU OFFICE Phone: Fax: SHENZHEN OFFICE Phone: Fax: (1) This product is designed to attenuate horizontal seismic motion; it is not intended to be effective against vertical seismic motion. This table will reduce the effect of tremors on an object loaded onto it, but there is no guarantee that the object will not move or topple. (2) In the event of seismic motion stronger than this product is designed to absorb, the table can be expected to strike the stopper, exerting an impact on any object atop the table. Warranty period The warranty period is one year from the date of delivery. Scope of warranty This warranty covers repairs to or replacement of a Seismic Isolation Table. It does not cover accidental damage, loss of business prots, interruption of business activities, loss or alteration of data, or the like, arising from the use of this product or due to the product being out of service. Disclaimer THK is not liable for any Seismic Isolation Table malfunction arising from any of the following: Tsunami, lightning, ooding, re, or another such accident or disaster. Damage to or collapse of a building due to an earthquake. Damage caused by the actions of a third party, intentional or unintentional misuse of the product by the customer, or use of the product under abnormal conditions. Loading of an object that is not within the table-load weight range stated in the product specications. Seismic input exceeding the product capacity stated in the specications or input exceeding the maximum displacement stated in the specications. Damage to an object located within range of the table s maximum displacement or caused by the presence of an object that obstructs the table s movement. Loading of an object that does not conform to the stated restrictions concern table loads. Placement or setup of a Seismic Isolation Table other than in conformity with instructions for correct placement and setup set forth in the instruction manual. LM Guide, Ball Retainer, and are registered trademarks of THK CO., LTD. Discrepancies may exist between photographic representations of products and the products themselves. Modications may be made, without prior notice, to a product's appearance and specications; please consult THK before using the product. Great care has been taken in the preparation of this brochure. Nevertheless, THK is not liable for damages arising from typographical errors or omissions. THK observes a policy of full compliance with the Foreign Exchange and Foreign Trade Act and other relevant laws and regulations in relation to the export of THK products and technology and to export-related sales activities. Please consult THK in advance concerning the export of individual products. All rights reserve XIAN OFFICE Phone: Fax: THK (SHANGHAI) CO.,LTD. Phone: Fax: TAIWAN THK TAIWAN CO.,LTD. TAIPEI HEAD OFFICE Phone: Fax: TAICHUNG OFFICE Phone: Fax: TAINAN OFFICE Phone: Fax: KOREA SEOUL REPRESENTATIVE OFFICE Phone: Fax: SINGAPORE THK LM System Pte. Ltd. Phone: Fax: THAILAND THK RHYTHM(THAILAND) CO., LTD. LM System Division Bangkok Branch Phone: Fax: INDIA THK India Pvt. Ltd. HEADQUARTERS & Bangalore Branch Phone: Fax: Pune Branch Phone: Chennai Branch Phone: Ahmedabad Branch Phone: Delhi Branch Phone: