BRIEF CV. Specialisation: Structural Engineering. Academic Qualification:

Transcription

1 Academic Qualification: BRIEF CV Professor Dato Abang Abdullah Abang Ali Department of Civil Engineering, Universiti Putra Malaysia UPM-Serdang MALAYSIA Tel : or 7850 aaaa@eng.upm.edu.my Specialisation: Structural Engineering University of Manchester / MSc (Structural Eng) University of Brighton / BSc(Hons) (Civil Eng) Professional Qualification/ Membership/ Affiliation: FICE, CEng (United Kingdom) HonFIEM, PEng (Malaysia) FIFS FAAET FASc HonFAFEO Past Honorary Adviser, Master Builders Association, Malaysia (MBAM) HonFelow & Past President, Federation of Engineering Institutions of Islamic Countries (FEIIC) Past President, Institution of Engineers, Malaysia (IEM) President, Malaysian Society for Engineering & Technology (mset) Appointments: Apr 2008 President, Malaysian Society for Engineering & Technology (mset) Feb Promoted to Senior Professor Special Grade A Aug 2006 Adviser, King Abdullah Univ of Science & Technology, Saudi Arabia. Oct 2005 Adjunct Professor, Univ Malaysia Sarawak (Unimas). Apr 2003 Apr 2005 President, Institution of Engineers, Malaysia (IEM) Jul 2002 Board & Council Member, Universiti Kuala Lumpur (UniKL) Jan 2003 Feb 2003 Research Visitor, University of Cambridge, United Kingdom. July 2002 President, Federation of Engineering Institution of Islamic Countries (FEIIC) Aug 2000 Aug 2005 Board Member, Board of Engineers, Malaysia (BEM). Nov 1999 Aug 2001 Director & Professor, Institute of Advanced Technology, Univ Putra Malaysia Aug 1993 Sept 1999 Dean & Professor, Faculty of Engineering, Univ Putra Malaysia. (Chairman, Malaysian Council of Engineering Deans (MCED)) Dec Promoted to Professor Special Grade B May 1997 Board Member, National Accreditation Board (LAN) Jul 1996 Director, Housing Research Centre, Univ Putra Malaysia. Jan Jul 1993 Head & Professor, Dept. of Civil Eng., Univ Putra Malaysia. Jun Dis 1989 Professor of Civil Eng., Univ Putra Malaysia. Aug Jun 1989 Royal Society Research Fellow, University of Manchester, U.K. Aug Aug 1988 Dean & Professor, Faculty of Eng., Univ Putra Malaysia. Aug 1987 Promoted to Professor of Civil Engineering Sep 1985 Aug 2000 Board Member, Malaysian Highway Authority (LLM). Dec Jul 1987 Dean & Assoc Professor, Faculty of Eng., Univ Putra Malaysia.

2 Sep Dec 1982 Deputy Dean & Associate Professor, Univ Putra Malaysia. Jul Aug 1981 Lecturer in Structural Engineering, Univ Putra Malaysia. Sep Jun 1981 Structural Engineer, Malaysian International Consultants Sdn. Bhd. Dec Aug 1980 Lecturer in Structural Engineering, Univ Putra Malaysia. Jun Dec 1978 Civil Engineer, Perunding Bakti (Engineering Consultants) Sdn. Bhd. Jan Jun 1978 Lecturer in Structural Engineering, Univ Putra Malaysia. Areas of Interest: Structural and Materials Engineering, Affordable Quality Housing, Industrialised Building System and Engineering Education. Research Topics Year Topic/ Sponsor Amount A preliminary survey of farm structures in Malaysia Low cost materials of construction Lightweight concrete using palm oil shell and clinkers Utilization of Malaysian Bamboo as an Engineering Material Road embankment on soft soil at Tangkak, Johor Use of interlocking load-bearing hollow-blocks in housing construction National Science Research Council IRPA thrust area: "Materials & Structures". Low cost settlement, partially prestressed concrete and building systems Development of Industrialised Building System RM2,705 RM24,344 RM2,500 RM11,100 RM1.0 million. RM80,000 RM1,137,000 RM994,250 RM305, Ministry of Housing and Local Government - Interlocking Load bearing Hollow Block Construction 2003 National Research Programme on Affordable Quality Housing Earthquake Resistant Housing Design and Building System, Akademi Sains Malaysia Application of Putra Block in Low-cost Housing Construction, BABENA CORP. Sustainable Housing Design, KESDEC RM 1.58 million RM26.0 million RM297,000 RM100, 000 RM122, Academy of Science Malaysia on Earthquake Resistant Housing Design RM297, Industrialised Building System, Naim Engineering Sdn. Bhd. RM1.0 million Student Supervision > 20 MS and PhD students > 30 BE projects

3 Research Products/ patent: Product Name PUTRA BLOCK Interlocking Load Bearing Hollow Block Building System. Patent Patent No. GB (2002) Publications: More than 200 papers Research Report - 10 Consultancy 8 Fellowships 7 Selected Papers 1. M. A. Algorafi, A. A. A. Ali, I. Othman, M. S. Jaafar, M. P. Anwar, 2010, Experimental Study of Externally Prestressed Segmental Beam Under Torsion, Journal of Engineering Structures, Vol.32:11:pp , IF Abang Abdullah Abang Ali, Engineering A Disaster-Prone World : A Professional Response, World Engineering Congress 2010, Conference on Building and Infrastructure Technology, Kuching, Sarawak, Malaysia, 2-5 Ogos Algorafi, M.A., A.A.A.Ali, M.S.Jaafar, I.Othman, M.P.Anwar and R.Rashid, 2009, Effect of Torsion on Externally Prestressed Segmental Concrete Bridge with Shear Key, American J. of Engineering and Applied Sciences, V2: pp 54-60, DOAJ 4. Hejazi, F, Noorzaei, J, Abang Abdullah, A.A. & Jaafar, M.S. (2007). Development of a computational algorithm to restrain lateral movement of buildings subjected to strong earthquake. Regional Conf on Engineering and Disaster Management, Lahore, Pakistan, March. 5. Abang Abdullah, A.A. (2007). Engineering excellence in a highly competitive world. Keynote Address, International Engineering Convention, March, Jeddah, Saudi Arabia. Republished in Al-Mohandis, March, Saudi Council of Engineers. 6. Benayoune,A, Abdul Samad, A.A. Trikha, D.N., Abang Abdullah, A.A., & Ellinna, S.H.M. (2007). Flexural behaviour of pre-cast concrete sandwich composite panel experimental and theoretical investigations. Construction and Building Materials. 7. Huat, B.B.K, Mohammed, T.A, Abang Abdullah, A.A., & Abdullah, A.A. (2007). Numerical and field study on triangular shell footing for low rise building. International Engineering Convention, March, Jeddah, Saudi Arabia. 8. Thanoon, W.A, Abang Abdullah, A.A, & Abbaker, A.F.E. (2007) Structural behaviour of sandwich panel under combined axial and lateral loading. International Engineering Convention, March, Jeddah, Saudi Arabia. 9. Omar, M.Z., Zaharim,A., Nik Mohamed, N.A, Haris, S.M, Abang Abdullah, A.A, & Basri,H. (2007). Soft skills and engineering graduates in Malaysia: Employers perspective. International Engineering Convention, March, Jeddah, Saudi Arabia. 10. Azlan A.A, Jaafar, M.S, Megat Mohd Nor, M.J, & Abang Abdullah, A.A. (2007). Project based learning in a civil engineering design coursed; A case study of implementation for outcomes. International Engineering Convention, March, Jeddah, Saudi Arabia 11. Hejazi,F, Noorzaei, J, Seifi, M, Jaafar, M.S, Abang Abdullah, A.A & Thanoo, W.A. (2007). Protection of buildings in vibration excitation. Proc of 3 rd World Engineering Congress, Penang. 5-9 August. 12. Peyman,G, Azmi, I, Jaafar, M.S, & Abang Abdullah, A.A. (2007). Performance-based seismic design philosophy incorporating vertical seismic component in the near field. Proc of 3 rd World Engineering Congress, Penang. 5-9 August.

4 13. Al-Gorafi, M.A, Abang Abdullah, A.A, Jaafar, M.S. & Othman, I. (2007). Performance of segmental prestressed concrete bridges under combined stresses: a critical review. Proc of 3 rd World Engineering Congress, Penang. 5-9 August. 14. Hejazi, F, Abang Abdullah, A.A, Waleed, A.T, Jaafar, M.S. & Noorzaei, J. (2007). Seismic resistance of frame buildings using effective control system. Proc. of World Housing Congress, 1-5 July, Kuala Trengganu. 15. Hejazi, F, Noorzaei, J, Abang Abdullah, A.A. & Jaafar, M.S. (2007). Optimization of building structures equipped with active variable stiffness system under earthquake excitation. Journal of Structural Engineering, India. 16. Abang Abdullah, A.A. (2007). Frontiers in Engineering: A journey in Creativity, Innovation and Excellence. Keynote Address. 3 rd World Engineering Congress., Penang. 5-9 August 17. Abang Abdullah, A.A. (2007). Engineering technology the way forward. Keynote Address. International Conf on Engineering Technology 2007 (ICET2007), Kuala Lumpur, December. 18. J. Noorzaei, S.J.S. Hakim, M.S. Jaafar, A.A. Abang Ali & W.A.M. Thanoon, 2007, An optimal architecture of artificial neural network for predicting compressive strength of concrete. The Indian Concrete Journal, v2007: pp Aziz, A., Noor, M.J.M.M., Ali, A.A.A. and Jaafar, M.S A Malaysian Outcome-Based Engineering Education Model. International Journal of Engineering and Technology, 1(1): Benayoune, A., Samad, A.A.A., Trikha, D.N., Abang Ali, A.A. and Ashrabov A.A., Structural Behaviour of Eccentrically Loaded Precast Sandwich Panels. Construction and Building materials, 20 (2006) Benayoune, A., Samad, A.A.A., Abang Ali, A.A. and Trikha, D.N., Response of Pre-Cast Reinforced Composite Sandwich Panels to Axial Loading, Construction and Building materials, 21 (2007) Jaafar, M.S., Thanoon, W.A., Najm, A.M.S., Kadir, M.R.A. and Ali, A.A.A Strength Correlation between Individual Block, Prism and Basic Wall Panel for Interlocking Mortarless Hollow Block Masonry. Construction and Building Materials, 20(7): Kadir, M.R.A., Lee, W.P., Jaafar, M.S., Sapuan, S.M. and Ali, A.A.A Construction Performance Comparison between Conventional and Industrialized Building System in Malaysia. Structural Survey, 1: Zahurul Islam, S.M., Ali, A.A.A. and Jaafar, M.S An Investigation on Structural Performance of Profiled Steel Sheet to Develop Self-Supporting Roofing System. Advanced Steel Construction, 2(2006): Kadir, M.R.A., Lee, W.P., Jaafar, M.S., Sapuan, S.M. and Ali, A.A.A Factors Affecting Construction Productivity for Malaysian Residential Construction Projects. International Journal of Structural Survey (United Kingdom), 23(1):42-54(13). 26. Kadir, M.R.A., Lee, W.P., Jaafar, M.S., Sapuan, S.M. and Ali, A.A.A Performance Comparison between Structural Elements of Building Systems in Malaysia. American Journal of Applied Science, 2(5): Zahrul, S.M., Abang Abdullah, A.A. & Jaafar, M.S.(2005).Structural behaviour of corrugated zincalume thin shell metal elements as a self-supporting roofing element. Fourth International Conference on Advances in Steel structures. pp Abang Abdullah, A.A., (2005). Teachers of engineering and graduate employment: A professional perspective. Regional Conference on Engineering Education Engineering Education: Meeting the challenges of graduates employability. Keynote Address December, Eden Garden Hotel, Johor Bahru.

5 Awards & Recognitions: National Level Awards/Honors Year 1. Johan Bintang Kenyalang (JBK), (Sarawak State Award) CIDB R&D Award for Putra Block Building System MBAM Bronze Medal Dato Paduka Mahkota Selangor (DPMS), (Selangor State Award) 2008 International Level Awards/Honors 1. Gold Medal for PUTRA BLOCK at the International Exhibition of Inventions and Innovations, Geneva, Switzerland. 4 April. 2. U.S., U.K., Swiss & Malaysian Patent - PUTRA BLOCK Interlocking Load Bearing Hollow Block Building System. 3. Honorary Fellow, Federation of Engineering Institutions of Islamic Countries Year