MS SE 30AH 500 Equipment options

Transcription

1 MS SE 0AH 500 Equipment options

2 Equipment options with Schuko and CEE Order-No.: MS SE 0AH 500-Bsp Distribution units (10 partitions) 4Schuko-Outlets 1 6/0,0A, 4-pol. 4MCB, B, 1-pol. Order-No.: MS SE 0AH 500-Bsp Distribution units (10 partitions) 6 Schuko-Outlets 1 6/0,0A, 4-pol. 6 MCB, B, 1-pol. Order-No.: MS SE 0AH 500-Bsp Distribution units (10 partitions) Schuko-Outlets 1 6/0,0A, 4-pol. 5 MCB, B, 1-pol. 2 CEE, -pol. Order-No.: MS SE 0AH 500-Bsp Distribution units (10 partitions) 1 6/0,0A, 4-pol. 6 MCB, B, 1-pol. 6 CEE, -pol. 1 MCB2A, C, 1-pol. for heating Order-No.: MS SE 0AH 500-Bsp Distribution units (10 partitions) 1 6/0,0A, 4-pol. MCB, B, 1-pol. Schuko-Outlets 1 CEE, 5-pol. 1 MCB, B, -pol. 1 MCB2A, C, 1-pol. for heating 2

3 Equipment options with CEE and lockable outlets Order-No.: MS SE 0AH 500-Bsp Distribution unit (10 partitions) Schuko-Outlet 1 6/0,0A, 4-pol. MCB, B, 1-pol. 2 CEE, 5-pol. 2 MCB, B, -pol. Order-No.: MS SE 0AH 500-Bsp-10 2 Distribution unit (10 partitions) CEE, -pol. 1 6/0,0A, 4-pol. MCB, B, 1-pol. 1 CEE, 5-pol. 1 MCB, B, -pol. Order-No.: MS SE 0AH 500-Bsp Distribution unit (10 partitions) 2 CEE, -pol. 1 6/0,0A, 4-pol. 2 MCB, B, 1-pol. 2 CEE, 5-pol. 2 MCB, B, -pol. CEE CEE -pol. -pol. CEE CEE -pol. -pol. Order-No.: MS SE 0AH 500-Bsp Distribution unit (10 partitions) 4CEE, -pol. lockable 1 6/0,0A, 4-pol. 4MCB, B, 1-pol. Order-No.: MS SE 0AH 500-Bsp-110 CEE 5-pol. CEE 5-pol. 2 Distribution unit (10 partitions) 2 CEE, 5-pol. lockable 1 6/0,0A, 4-pol. 2 MCB, B, -pol.

4 Equipment options with lockable outlets Order-No.: MS SE 0AH 500-Bsp-107 CEE CEE -pol. -pol. 2 Distribution units (10 partitions) CEE CEE 1 6/0,0A, 4-pol. -pol. 5-pol. MCB, B, 1-pol. 1 MCB, B, -pol. CEE, -pol. lockable 1 CEE, 5-pol. lockable Order-No.: MS SE 0AH 500-Bsp-108 CEE CEE -pol. -pol. CEE CEE 5-pol. 5-pol. 2 Distribution units (10 partitions) 2 CEE, -pol. lockable 1 6/0,0A, 4-pol. 2 CEE, 5-pol. lockable 2 MCB, B, 1-pol. 2 MCB, B, -pol. We have a total 14 different equipment options in our product range. MS SE 0AH 500 equipment options 07/200 echnical alternations are subject to change without prior notice. Moser Systemelektrik Erikaweg 1 D Schönwald elefon 0049(0)77 22/ Fax 0049(0)77 22/ info@moser-systemelektrik.de Great Britain Sugg Lighting Ltd. Electric Equipment Sussex Maor Business Park Gatwick Road Crawley West Sussex RH 10 2 GD el / Fax 0044 /

5 ype description for retractable supply post MS SE 0A Standard echnical data Protection stages: IP 44 for electrical outlets IP 55 for distributors Protection equipment: earth contact class 1 Mains voltage/ frequency: 20/400 V, 50 Hz Kind of voltage: N-S System Connection value: approx. 15 kw Feed in cable max. permissible: 5 x 16 mm 2 Equipment side A Equipment side B 1 distributor, 10 partitions 1 CEE, 5-pol. 1 fault current protective switch 2 pieces of earthed outlets 40/0,0A, 4-pol. 1 cable protect. switch 16 A, B, -pol. 2 cables protect. switch 16 A, B, 1-pol. 1 cable protec. switch 2 A, K, 1-pol. (for heating) Weights Concrete shaft + Shaft insert: 450 kg Device column equipped: 0 kg Dimensions Concrete shaft (H x W x D:) 795 x 610 x 885 mm Cover support (incl. sealing compound): 110 mm Installation depth: 905 mm Stroke: 2 mm Space for pavement in cover: 50 mm Load capacity for the paved cover under DIN EN/ 24: D 400, 40 t point load Lifting mechanism: hread spindle Sewage connections: 2 x DN 40 Order-No. MS SE 0A-Sta-01 B D 18 A 51 C A D 885 C 1 - Cover 10 - Guide 2 - Case of insulated material 11 - surface water drainage - Cover support 12 - Lifting mechanism 4 - Concrete shaft 1 - Frame of guide 5 - Cable connection box 14 - Bottom support 6 - Connection clamps 15 - Drainage of shaft 7 - Pre-fuse 8 - Flexible connection cable 9 - Lead in cable (to prov. before inst.) B

6 Submission text for retractable supply post MS SE 0A Standard Retractable, practicable, column for connection and distribution of electricity as per the VDE-regulations for open space, soil flushing installation. Load capacity of the paved cover under the provisions of DIN EN D 400 (40t point load), kind of protection IP 44 for earth plugs, kind of protection IP 55 for distributors consisting of: Concrete shaft Supporting concrete shaft under the provisions of DIN B 45 (for traffic loads under the provisions of DIN 1072, bridge class SLW 60) for a protected insertion of the retractable supply post into soil. here are integrated: - Cable connection box for assembling of a connecting module - two cable lead through for receiving a cable lead-on - C-bar for tension relief of the connection cable - hread-connection plug for the installation of the exterior earth contact - Surface water drainage DN40 - Shaft drainage DN40 Shift insertion Metal insertion of corrosion resistant aluminium consisting of: - Guide frame (corrosion resistant aluminium profiles) as sliding supports for the device column - Cover support with sealing, pavement frame, drainage, open pipe for surface water drainage - Bottom support with lifting mechanism (thread-spindle, spindle-guide and spindle nut) Device column Horizontal draw out case construction of weather resistant PVC with built on shift cover of cast aluminium, built-in space of 50 mm for pavement. he case of insulated material (IP 55) is a self supporting construction and constructed as a rugged and shock resistant device. 2 sides (A+B) are provided for the equipment of the device. Lead-in can be plugged by flexible connection cable 5 x 6 mm 2. he lifting mechanism with thread spindle is located in the centre of the device column. For the operating by crank handle the spindle is passed through the cover and is watertight.

7 Electric device modules he interior wiring of the devices and the feeding-in are arranged for the N-S system (as per diagram of connections). Wiring for other systems only after technical clarification and written contract. Side A: 1 piece of distribution module with transparent cover for 10 partitions 1 piece of fault current protective switch FI 6A, 4-pol., 0 m A 1 piece of cable protective switch LS 16 A, B, -pol. 2 pieces of cable protective switch LS 16 A, B, 1-pol. 1 piece of cable protective switch LS 2 A, K, 1-pol. for heating Side B: 1 piece of attached electrical outlet CEE 16 A, -pol. 2 pieces of electrical earth outlets Cable connection module KAM 16-1 PVC device supporting base with series clamps mm 2 for feeding in or sliding on of lead in cable. Pre-fuse NH 0025 A plug-clutch 5 A and tension relief for the flexible connection cable. Cable leading on KDF 16-1 Screwing sockets PG 29 with shrink-hose for watertight leading in of the connection cable and of the leading-off cable. Crank handle (included in price when ordered) Price: Delivery: Delivery time: per piece + VA assembled completely, completely wired and checked ex factory, packaging not included min. 6-8 weeks after receipt of order and technical clarification.

8 Survey of diagram of connections for retractable supply post MS SE 0A Standard PE N 20/400V 50 Hz N-S system 5 Fault current protective switch FI 40/0,0A flexible cable H07RN-F 5G 6 mm A-plug connection Cable connection module KAM 16 with NH A K 2 A Cable lead through KDF ) 2) /N/PE CEE 16 A Earth contact 5-pol. (to connect when installing) 2 pieces of earth electrical plugs Heating Lead in cable max. 16 mm 2 (to provide before installing) 1) M 10 pin (super refined steel) at the outside of concrete shaft 2) Shaft insertion 7/2000 MS SE ypenbeschreibung SE 0A Standard - E. echnical alterations are subject to change without notice. Moser Systemelektrik Erikaweg 1 D Schönwald elefon 0049(0)77 22/ Fax 0049(0)77 22/ Moser.Systemelektrik@t-online.de Internet:

9 ype description for retractable supply post MS SE 0AH 500 Standard echnical data Protection stages: IP 44 for electrical outlets IP 55 for distributors Protection equipment: earth contact class 1 Mains voltage/ frequency: 20/400 V, 50 Hz Kind of voltage: N-S System Connection value: approx. 15 kw Feed in cable max. permissible: 5 x 16 mm 2 Equipment side A Equipment side B 2 distributor, 10 partitions 6 CEE, -pol. 1 fault current protective switch 6/0,0 A, 4-pol. 6 cables protective switch 16 A, B, 1-pol. 1 cable protective switch 2 A, C, 1-pol. (for heating) Weights Concrete shaft + Shaft insert: 580 kg Device column equipped: 50 kg Dimensions Concrete shaft (HxWxD): 795 x 610 x 885 mm Cover support (incl. sealing compound): 110 mm Installation depth: 905 mm Stroke: 400 mm Space for pavement in cover: 50 mm Load capacity for the paved cover under DIN EN 124: D 400, 40 t point load Lifting mechanism: hread spindle Sewage connections: 2 x DN 40 Order-No. MS SE 0AH 500-Sta-01 Equipment side A Equipment side B B D 18 A 51 C A 610 D 885 C 1 - Cover 10 - Guide 2 - Case of insulated material 11 - surface water drainage - Cover support 12 - Lifting mechanism 4 - Concrete shaft 1 - Frame of guide 5 - Cable connection box 14 - Bottom support 6 - Connection clamps 15 - Drainage of shaft 7 - Pre-fuse 8 - Flexible connection cable 9 - Lead in cable (to prov. before inst.) B

10 Submission text for retractable supply post MS SE 0AH 500 Standard Retractable, practicable, column for connection and distribution of electricity as per the VDE-regulations for open space, soil flushing installation. Load capacity of the paved cover under the provisions of DIN EN D 400 (40t point load), kind of protection IP 44 for earth plugs, kind of protection IP 55 for distributors, consisting of: Concrete shaft Supporting concrete shaft under the provisions of DIN B 5 (for traffic loads under the provisions of DIN 1072, bridge class SLW 60) for a protected insertion of the retractable supply post into soil. here are integrated: - Cable connection box for assembling of a connecting module - two cable lead through for receiving a cable lead-on - C-bar for tension relief of the connection cable - hread-connection plug for the installation of the exterior earth contact - Surface water drainage DN 40 - Shaft drainage DN 40 Shift insertion Metal insertion of corrosion resistant aluminium consisting of: - Guide frame (corrosion resistant aluminium profiles) as sliding supports for the device column - Cover support with sealing, pavement frame, drainage, open pipe for surface water drainage - Bottom support with lifting mechanism (thread-spindle, spindle-guide and spindle nut). Device column Horizontal draw out case construction of weather resistant PVC with built on shift cover of cast aluminium, built-in space of 50 mm for pavement. he case of insulated material (IP 55) is a self supporting construction and constructed as a rugged and shock resistant device. 2 sides (A+B) are provided for the equipment of the device. Lead-in can be plugged by flexible connection cable 5 x 6 mm 2. he lifting mechanism with thread spindle is located in the centre of the device column. For the operating by crank handle the spindle is passed through the cover and is watertight.

11 Electric device modules he interior wiring of the devices and the feeding-in are arranged for the N-S system (as per diagram of connections). Wiring for other systems only after technical clarification and written contract. Side A: 2 pieces of distribution modules with transparent cover for 10 partitions 1 piece of fault current protective switch FI 6A, 4-pol., 0 m A 6 pieces of cable protective switch LS 16 A, B, 1-pol. 1 piece of cable protective switch LS 2 A, C, 1-pol. for heating Side B: 6 pieces of attached electrical outlet CEE 16 A, -pol. Cable connection module KAM 16-1 PVC device supporting base with series clamps mm 2 for feeding in or sliding on of lead in cable. Prefuse NH 005 A plug-clutch 5 A and tension relief for the flexible connection cable. Cable leading on KDF 16-1 Screwing sockets PG 29 with shrink-hose for watertight leading in of the connection cable and of the leading-off cable. Crank handle (included in price when ordered) Price: Delivery: Delivery time: per piece + VA assembled completely, completely wired and checked ex factory, packaging not included min. 6-8 weeks after receipt of order and technical clarification

12 Survey of diagram of connections for retractable supply post MS SE 0AH 500 Standard PE N 20/400V 50 Hz N-S system 5 flexible cable H07RN-F 5G 6 mm 2 Fault current protective switch FI 6/0,0 A 4 5 A-plug connection Cable connection module KAM 16 with NH-00 5 A C 2 A Cable lead through KDF 16 1) 2) Earth contact (to connect when installing) 6 pieces of CEE 16 A, -pol. Heating Lead in cable max. 16 mm 2 (to provide before installing) 1) M 10 pin (super refined steel) at the outside of concrete shaft 2) Shaft insertion 01/2004 MS SE ype description SE 0AH E. echnical alterations are subject to change without notice. Moser Systemelektrik Erikaweg 1 D Schönwald elefon 0049(0)77 22/ Fax 0049(0)77 22/ info@moser-systemelektrik.de