ALTERNATOR. LSA 36 - single-phase to 11.5 kva
|
|
|
- Leonard Terry
- 6 years ago
- Views:
Transcription
1 3692 en / f ALTERNATOR LSA 36 - single-phase to 11.5 kva
2 LSA 36 ALTERNATOR Developed using special modelling software to give optimised electrical performance Designed to supply power to all electrical tools and electronic equipment : THC 3.5 % High motor starting capacity : 2 Pn Short-circuit current : 4 In One LSA 36 for all coupling types Adaptor kits Single bearing with flex-plate IM 1201 Compact and lightweight 10 kva mm - 31 kg Two bearing IM 1001 A single frame from 3.5 to 11.5 kva SAE J 609a VAIT 23 and 30 Complies with the following standards : I.E.C., NF, UTE, C.S.A., NEMA, V.D.E., B.S., UL 1446 (insulation system) etc.
3 - 3000/3600 rpm - IP 23 Modular terminal box Easy access to power terminals Removable facia for integrating sockets, circuit-breakers and voltmeters Quick assembly Less than 3 minutes to couple to the (patented system) Vertical or horizontal mounting Simple fixing using a single screw size (13 mm socket) Declaration of incorporation for marking available
4 LSA 36 ALTERNATOR Power ratings 3000 rpm - 50 Hz / 230V - Single-phase - P.F. 1 Type kw / kva Regulation (voltage) (1) Harmonic THC (2) Efficiency 4/4 of load (3) Air flow m 3 /h SAE J 609a LSA 36 L15 A1/2 3,5 71% LSA 36 L25 A1/2 4,2 LSA 36 L35 A1/2 4,8 71% 73,5% A ext 5 LSA 36 L5 A1/2 5,5 76% LSA 36 L7 A1/2 6,5 77,5% LSA 36 L8 A1/2 7 78% LSA 36 L10 A1/2 LSA 36 L12 A1/2 LSA 36 L25 A1/2 LSA 36 L35 A1/2 LSA 36 L5 A1/2 LSA 36 L7 A1/2 LSA 36 L8 A1/2 LSA 36 L10 A1/2 LSA 36 L12 A1/2 LSA 36 L25 LSA 36 L35 LSA 36 L5 LSA 36 L7 LSA 36 L8 LSA 36 L , ,0055 0,006 0,007 0, ,0085 0,009 0,01 0, % 79,5% Power ratings 3600 rpm - 60 Hz / 240V - Single-phase - P.F. 1 Type kw / kva Regulation (voltage) (1) Harmonic THC (2) LSA 36 L15 A1/2 4,2 71,5% 3,5% 71,5% 74% 76,5% 78% 79% 79,5% LSA 36 L , , , , ,0055 3,5% (1) Voltage regulation when cold at rated speed. (2) THC on non-distorting load or no load. (3) Efficiency when cold at rated speed. Type Efficiency 4/4 of load (3) 80% 2 Weight (kg) / Centre of gravity (mm) / Inertia J (kg.m ) Weight (kg) Tapered shaft SAE J 609a (mm) J (kg.m 2 ) Single bearing with disc IM 1201 Weight (kg) (mm) J (kg.m 2 ) Weight (kg) Tapered shaft VAIT (mm) J (kg.m 2 ) 0,0055 0,006 0,007 0, ,5 23,5 26,5 29, ,0055 0,006 0, , , ,007 26, ,007 0, , , , ,011 29, , ,00796 Air flow m 3 /h Weight (kg) SAE J 609a A ext 5 Two bearing IM 1001 (mm) J (kg.m 2 ) LSA 36 L , , , , ,00858
5 - 3000/3600 rpm - IP 23 Ø 41, ,05 Single bearing with tapered shaft - SAE J 609a Ø ,127 Ø 314, Ø 105 J7 30,2 5-0,050-0,1 Ø 215, ,12 + 0,08 Ø _ 1 308, , _ 1 313,5 307,5 +_ 1 (M8 nut) 323, , (M10 nut) (SAE J 609a A ext 5) (SAE J 609a ) Single bearing with tapered shaft - VAIT (M8 nut) (M10 nut) ,5 Air inlet 275,5 4 equidistant holes Ø 8.5 on Ø ,5 Air inlet Single bearing with disc - IM SAE Ø equidistant holes Ø 9 on Ø 135 Air outlet 1/2 6 equidistant holes Ø 9 on Ø Dimensions of taper on next page 22 30' 4 holes Ø 11 on Ø Ø Dimensions of taper on next page 5 308,5 +_ 1 (M8 nut) ,5 +0 (M10 nut) Air inlet 8 equidistant holes Ø 11 on Ø Two bearing - IM 1001 (B3 or B34) 60 3, equidistant holes M8 on Ø 130 Ø 110 j6 Ø 28 j , , M10x22 10,5 328,5 + _ 1 (M8 nut) ,5 +0 (M10 nut) Air inlet Ø 12 Dimensions in millimetres
6 LSA 36 ALTERNATOR Dimensions of the taper coupling SAE J 609a Ø Ø 19,05 Ø 41,27 +0,05 +0 Ø 17,46 (gauge plane) + 0,3 5/16 UNF 60,7 Taper angle : 5 21'20" 60,7 76,6 3,5 71,8 Flange A - ext 5 + 0,12 +0,08 Ø 146 Ø 19,05 (gauge plane) + 0,12 +0,08 Ø 146 Ø 19,05 (gauge plane) 96,5 + Ø 35 0,2 J7 Ø Ø Ø 105 Ø Ø 30 5/16 UNF Taper angle : 5 21'20" Ø 19,05 (gauge plane) Ø 35 10,5 + 0,4 97,2 38 5/16 UNF + 1,5 Taper angle : + 0,4 + 0,4 97,2 109, '20" 97,2 Ø 19,05 (gauge plane) 84,5 + 97,2 0,4 Flange B - ext 6 - C 22 / C 25 - Rod : 5/16 UNF x 245 Flange B - ext 6 - C 35 - Rod : 5/16 UNF x 263 Dimensions of the taper coupling VAIT Ø 23 - Ø 30 J7 Ø 30 M 8 Taper angle : 5 42'38" M 14x Taper angle : 5 42'38" VAIT Ø 23 - C23 - Rod M8 x 323 VAIT Ø 30 - C30 - Rod M14 x 313 Dimensions in millimetres
7 - 3000/3600 rpm - IP 23 Optional electrical equipment Type : L15/L25/L35/L5/L7 Kit 1 F (French) or Kit 1 S (Schuko) - 2 single-phase sockets* 16 A + earth + circuit-breaker Kit 2 F (French) or Kit 2 S (Schuko) - 2 single-phase sockets* 16 A + earth + circuit-breaker - 1 voltmeter with led Kit 3 F (French) or Kit 3 S (Schuko) - 2 single-phase sockets* 16 A + earth + circuit-breaker - 3 terminals 12 / 24 V + circuit-breaker Type : L8/L10/L12 Kit 5 F (French) or Kit 5 S (Schuko) - 1 single-phase socket 32 A + earth - 1 single-phase socket* 16 A + earth + circuit-breaker Kit 6 F (French) or Kit 6 S (Schuko) - 1 single-phase socket 32 A + earth - 1 single-phase socket* 16 A + earth + circuit-breaker - 1 voltmeter with led Kit 7 F (French) or Kit 7 S (Schuko) - 1 single-phase socket 32 A + earth - 1 single-phase socket* 16 A + earth + circuit-breaker - 3 terminals 12 / 24 V + circuit-breaker Kit 4 F (French) or Kit 4 S (Schuko) - 2 single-phase sockets* 16 A + earth + circuit-breaker - 3 terminals 12 / 24 V + circuit-breaker - 1 voltmeter with led Kit 8 F (French) or Kit 8 S (Schuko) - 1 single-phase socket 32 A + earth - 1 single-phase socket* 16 A + earth + circuit-breaker - 3 terminals 12 / 24 V + circuit-breaker - 1 voltmeter with led * Single-phase socket 16 Amp French (kit.. F) or Schuko (kit..s).
8 LEROY-SOMER ANGOULÊME CEDEX - FRANCE RCS ANGOULÊME N B S.A. au capital de
3867 en / a
3867 en - 9.24 / a Alternators LSA 49.1-4 Pole Electrical and mechanical data SPECIALLY ADAPTED FOR APPLICATIONS The LSA 49.1 alternator is designed to be suitable for typical generator applications, such
Alternators single phase dedicated - 4 Pole LSA 43.2 / LSA 44.2
Alternators single phase dedicated - 4 Pole LSA 43.2 / LSA 44.2 5 to 135 kva Electrical and mechanical data 3542 en - 12.08 / f LSA 43.2 / 44.2-4 Pole SPECIALLY ADAPTED FOR SINGLE PHASE Dedicated single
3363 en / e
3363 en - 03.2005 / e alternators 4 Pole range : 5-2700 kva General features and ratings ALTERNATORS Summary Page 1 - RATING DEFINITION... 3 2 - INSULATION CLASS AND TEMPERATURE RISE... 3 3 - DERATING...
LSA 53.2 Low Voltage Alternator - 4 pole
LSA 53.2 Low Voltage Alternator - 4 pole 400V - 50 Hz / 480V - 60 Hz Electrical and mechanical data Specially adapted to applications The LSA 53.2 alternators are designed to be suitable for typical generator
3867 en / f. Alternators. LSA Pole Electrical and mechanical data
3867 en - 21.4 / f 66... 1 kva - Hz 7... 12 kva - 6 Hz Alternators LSA 49.1-4 Pole Electrical and mechanical data SPECIALLY ADAPTED FOR APPLICATIONS The LSA 49.1 alternator is designed to be suitable for
LSA 42.3 Low Voltage Alternators - 4 pole
LSA 42.3 Low Voltage Alternators - 4 pole 2 to 60 kva - 0 Hz / 31. to 7 kva - 60 Hz Electrical and mechanical data Specially adapted to applications The LSA 42.3 alternator is designed to be suitable for
LSA 47.2 Low Voltage Alternators - 4 pole
LSA 47.2 36 to 6 kva - Hz / 46 to 7 kva - 6 Hz Electrical and mechanical data LSA 47.2-36 to 6 kva - Hz / 46 to 7 kva - 6 Hz Specially adapted to applications The LSA 47.2 alternator is designed to be
LSA 51.2 Low Voltage Alternators - 4 pole
LSA 1.2 Low Voltage Alternators - 4 pole 186 to 2 kva - Hz / 223 to 3 kva - 6 Hz Electrical and mechanical data Specially adapted to applications The LSA 1.2 alternator is designed to be suitable for typical
Low Voltage Alternators - 4 pole LSA 46.2
LSA 46.2 18 to 31 kva - Hz / 228 to 381 kva - 6 Hz Electrical and mechanical data LSA 46.2-18 to 31 kva - Hz / 228 to 381 kva - 6 Hz Specially adapted to applications The LSA 46.2 alternator is designed
Low Voltage Alternators - 4 pole LSA 46.3
LSA 46.3 180 to 365 kva - 50 Hz / 225 to 435 kva - 60 Hz Electrical and mechanical data Specially adapted to applications The LSA 46.3 alternator is designed to be suitable for typical generator applications,
Low Voltage alternators - 4 pole LSA 42.3
Low Voltage alternators - 4 pole LSA 42.3 2 to 60 kva - 0 Hz / 31. to 7 kva - 60 Hz Electrical and mechanical data 42en - 12.02 / c SPECIALLY ADAPTED TO APPLICATIONS The LSA 42.3 alternator is designed
3820 en / c
38 en -.6 / c Alternators LSA 44.2-4 Pole Electrical and mechanical data SPECIALLY ADAPTED FOR APPLICATIONS The LSA 44.2 alternator is designed to be suitable for typical generator applications, such as:
LSA Rating Table Low Voltage Alternators - 4 pole
LSA Rating Table Low Voltage Alternators - 10 to 3300 kva - 50 Hz / 12.5 to 3900 kva - 60 Hz General features and ratings Summary 1 - RATING DEFINITION... 3 2 - INSULATION CLASS AND TEMPERATURE RISE...
3456 en / c. 1 to 20 MW Land and offshore applications
3456 en - 12.2005 / c 1 to 20 MW Land and offshore applications POWER ALTERNATORS Generating Progress Gas or steam turbine application There is currently an enormous increase in energy requirements throughout
ALTERNATEURS - ALTERNATORS
Réf. 2266 - E 2/a - 02.96 ALTERNATEURS - ALTERNATORS LSA 2.1, 5 / 5 E - A - monophasé/single phase ALTERNATEURS / ALTERNATORS LSA 2.1 PUISSANES à 000 min -1-50 Hz - MONOPHASE - os Ø = 1 RATING at 000 RPM
Environmental Product Declaration FLSES. 3-phase induction motors with cast iron frame
FLSES 3-phase induction motors with cast iron frame INFORMATION ABOUT THE COMPANY Leroy-Somer is one of the world leaders in electromechanical and electronic drive systems and the world leader in industrial
Product Environnemental Profile LSES. 3-phase induction motors with aluminium frame
Product Environnemental Profile LSES 3-phase induction motors with aluminium frame INFORMATION ABOUT THE COMPANY Leroy-Somer is one of the world leaders in electromechanical and electronic drive systems
Environmental Product Declaration PLSES. 3-phase induction ODP motors
PLSES 3-phase induction ODP motors INFORMATION ABOUT THE COMPANY Leroy-Somer is one of the world leaders in electromechanical and electronic drive systems and the world leader in industrial alternators.
LUBRICATION PUMP Z2 CENTRAL LUBRICATION
LUBRICATION PUMP APPLICATION Lubrication pumps are used as a source of pressure lubricant in the circuits of two-line central lubrication systems. Pumps can be used for lubrication of high number of lubricated
INDeX Rack Installation Notes
INDeX Rack Installation Notes 38PJC00001SBA - Issue 8 (09/01/2002) Page 2 Contents Contents Rack Mounted Installation...3 Introduction... 3 Rack Installation Requirements... 3 Summary Details... 3 The
M A N U F A C T U R I N G R A N G E S S A L E S C O N T A C T S B U S I N E S S S E C T O R S
4016 en - 02.2006/a L E R O Y - S O M E R F O U N D R Y B U S I N E S S S E C T O R S ELECTRIC MOTORS, GEARBOXES, ALTERNATORS AIR AND REFRIGERATION COMPRESSORS TEXTILE MACHINERY AGRICULTURAL MACHINERY
OptiLine 70. Service Poles. Technical and Material data
P9 P97 P97 Description is a service pole range for all types of. Service poles are made of natural anodized aluminium with a high surface fi nish. They are installed free-standing in the room, mounted
Insulated enclosure, +knockouts, RAL7032, HxWxD=500x375x225mm
DATASHEET - CI45E-200-RAL7032 Delivery program Insulated enclosure, +knockouts, RAL7032, HxWxD=500x375x225mm Part no. CI45E-200-RAL7032 Catalog No. 090160 EL-Nummer (Norway) 2502339 Dimensions mm Product
Miniature I/P, E/P Transducer
Miniature I/P, E/P Transducer Accurate and economical electronic pressure control The Type 550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional
Axial Fans - Basic principles. Expertise, performance, innovation
Axial Fans - Basic principles Expertise, performance, innovation Fans Motors Control electronics Appendix 15 The truly space-saving axial fans from ebm-papst are used to exchange hot and cold air in all
PHRT HEAT PUMP WITH HYDRAULIC EQUIPMENT AIR / WATER 7 to 16 KW
TECHNICAL INSTRUCTIONS PHRT HEAT PUMP WITH HYDRAULIC EQUIPMENT AIR / WATER to KW PHRT PHRT PHRT For terminal units and boiler overhaul applications Heating Cooling PHRT.0 kw -.0 kw PHRT.00 kw -.0 kw 0.0
Installation plan. Washer-extractor PW 6107 EL. en - GB M.-Nr / 01
Installation plan Washer-extractor PW 6107 EL en - GB 10.11 M.-Nr. 09 270 450 / 01 M.-Nr. 09 270 450 / 01 2 Technical Datasheet Washer-extractor: Heating: PW 6107 Electric (EL) Legend: Solid circle
G2D Series Performance Data Discharge: 1-1/4 Solids: 1/4. Wholesale Products Page: JP10075SSD-1 Section: Performance Data Dated: January, 2011
100 Best Efficiency Point 90 80 70 TDH (ft) 60 50 40 30 20 10 The curve reflects maximum performance characteristics without exceeding full load (Nameplate) horsepower. Operation is recommended near the
G2DT Series Performance Data Discharge: 1-1/4 Solids: 1/4. Wholesale Products Page: JP10074SSD-1 Section: Performance Data Dated: January, 2011
100 Best Efficiency Point 90 80 70 TDH (ft) 60 50 40 30 20 10 The curve reflects maximum performance characteristics without exceeding full load (Nameplate) horsepower. Operation is recommended near the
RL SERIES. Two Stage Light Oil Burners FIRING RATES LIGHT OIL
The RL series of burners covers a firing range from 154 to 2700 kw, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation
Close Coupled Sump Pumps Type ETLB
Close Coupled Sump Pumps Type ETLB»dry running safe«technical data Flow rate Q up to 104 m 3 /h Head H up to 36 m Submersion depth up to 775 (795) mm Suction extension up to 1500 mm Materials limits of
Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
Series Sump and Sewage Systems
Series 000 Sump and Sewage Systems file no: 0. date: may 17, 13 supersedes: 0. date: march 29, 13 Series 000 Sump Series 0 & 2 Armstrong offers a complete range of high performance, easily maintained Column
EC medium pressure axial fans. The efficient system solution.
EC medium pressure axial fans. The efficient system solution. GreenTech EC technology in a new dimension. Thanks to the new axial fans, our highly efficient GreenTech EC technology is now available for
heavy mate D Rated voltage 250 V Rated current 10 A A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128
heavy mate D Rated voltage 250 V Rated current 10 A... 16 A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128 22 heavy mate D Brief information Approvals, Testhouse Characteristics Approval-Number
RL SERIES. Two Stage Light Oil Burners FIRING RATES LIGHT OIL
The RL series of burners covers a firing range from 154 to 2700 kw, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation
Differential pressure
Differential pressure 228 Overview Differential pressure 230 VEGADIF 65 232 Chemical seal 236 Oval flange adapter, mounting bracket, cutting ring screwing 238 Valve block 227 Overview Differential pressure
TDC46M Carbon Steel Thermodynamic Steam Trap with Maintainable Seat
2 3 4 7 6 5 8 9 1 Optional extra V1 integral blowdown valve See spare parts for details on how to order; Alternatively please specify at the time of order placement. escription The TC46M is a carbon steel,
PRESSURE SWITCHES D-LT Electro-mechanical pneumatic pressure switches. 18D-LT x2 Electro-mechanical pneumatic pressure switches.
PRESSURE SWITCHES 8D-LT Electro-mechanical pneumatic pressure switches 8D-LT x Electro-mechanical pneumatic pressure switches Page -0 Page -0-0 8D-LT G/, / NPT or flange Microswitch with gold plated contacts
Manual adjustable guide rails
A FlexLink standard solution EDS Standardised Solutions 5611EN-1 Manual adjustable guide rails system for quick product changeovers The manual adjustable guiding system provides a very flexible way to
Load cell Pendeo Process and mounting kits
Load cell Pendeo Process and mounting kits Digital weighing technology for maximum transparency and precision The digital compression load cells in the Pendeo Process series are specially designed for
Marine motors. 10/2 Orientation 10/2 Overview 10/3 Benefits 10/3 Application 10/3 Technical specifications 10/5 More information
/2 Orientation /2 Overview /3 Benefits /3 Application /3 Technical specifications /5 More information /6 Type approved standard motors up to frame size 315 L /6 Overview /7 Type approved explosion-proof
Product Environmental Profile
LSES 3-phase induction motors with aluminium frame 4592 en - 2016.1 / b INFORMATION ABOUT THE COMPANY Leroy-Somer is one of the world leaders in electromechanical and electronic drive systems and the world
Cannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
Product Application. Prestige Power Post in White Epoxy Coated Aluminium Finish
Product Application 83 Prestige Power Post in White Epoxy Coated Aluminium Finish 84 Floor Distribution Technical Floor Distribution Technical 85 Range Technical Data Raised Floor Systems Interact Underfloor
Vibranivo Mononivo. Series VN 4000 MN Series. Instruction manual
Vibranivo Mononivo Series Series VN 4000 MN 4000 Instruction manual 010516 1 UWT GmbH Westendstraße 5 Tel.: +49 (0)831 57123-0 Internet:www.uwt.de D-87488 Betzigau Fax: +49 (0)831 76879 E-Mail: info@uwt.de
fischer termoz SV II ecotwist
fischer termoz SV II ecotwist The innovative countersinkable ETICS fixing for all building material classes. ETA-12/0208 ETAG 014 Use categories A, B, C, D, E We are turning towards your success: With
Unit Coolers SKB. 4 kw 30,5 kw.
Unit Coolers SKB 4 kw 30,5 kw www.friga-bohn.com SKB range unit coolers are suitable for chilling or low temperature storage applications. 24 basic models with capacities ranging from 4 to 30.5 kw. NOMENCLATURE...
DRUM MOTOR 138LS 138.5Ø 0.10kW kW, with steel helical gearbox
8 DRUM MOTOR DRUM MOTOR 18LS 18.5Ø 0.10kW - 1.00kW, with steel helical gearbox Product description The drum motor 18LS is a very fl exible component thanks to the wide range of powers and speeds. Characteristics
Water headers are made of reinforced plastic and the design of the spray tree ensures uniform water distribution.
COOLING TOWERS Main features of CT series cooling towers Standard Modural design Towers are constructed of standardized panels fabricated from heavy gauge hot-dip galvanized steel. Final assembly is made
SECTION A. NEC Compliance: Comply with NEC as applicable to installation and construction of electrical power/distribution transformers.
N 16461 DRY TYPE TRANSFORMERS PART 1 - GENERAL 1.01 WORK INCLUDED: A. Copper-wound transformer optimized for light loading, meeting US Department of Energy proposed Candidate Standard Level (CSL) 3 efficiency,
INSULATION GUARD MEG (Code ) INSTRUCTION MANUAL ( M / 99A ) (c) CIRCUTOR S.A.
INSULATION GUARD MEG-1000 (Code 2 28 981) INSTRUCTION MANUAL ( M 981 220 / 99A ) (c) CIRCUTOR S.A. ----- Insulation guard MEG-1000 -------- M - 981 220 --- Page nº 1 Insulation guard MEG-1000 1.- BASIC
Product information. UP-DO Pump Series Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.
Product information Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.4581 Description Normal priming centrifugal pumps with a double Mechanical seal Application:
Playmaker in the premium league
Playmaker in the premium league Wherever they are, FLENDER SIP planetary gear units provide top performance, and without a doubt in the Siemens drive train. siemens.com/flendersip Answers for industry.
MS SE 30AH 500 Equipment options
MS SE 0AH 500 Equipment options Equipment options with Schuko and CEE Order-No.: MS SE 0AH 500-Bsp-001 2 Distribution units (10 partitions) 4Schuko-Outlets 1 6/0,0A, 4-pol. 4MCB, B, 1-pol. Order-No.: MS
Borehole Pumps Best Practises
Borehole Pumps Best Practises When it has been identified that water should be abstracted for any reasons a Scope of Work should be developed. 1. Essential Steps when determining Scope. - Determine the
VSS S U B M E R S I B L E S E W A G E P U M P S
7 2 9 8 / 2 3 HP % % 64% 7 5 HP HP 5 HP % % C u r v e P a g e V S S - 4 5 R P M M O D E L : V S S - 4 E I M P E L L E R : V S A - 4 C - 2-5 A l s o a p p l i e s t o V S S - 5 E & V S S - 6 E 7 7 65 55
sivacon Safety Embedded in Supreme Design: The Power Distribution Board, that sets new standards.
Safety Embedded in Supreme Design: The Power Distribution Board, that sets new standards. sivacon Everything. Perfect. With Low-Voltage Power Distribution by Siemens. SIVACON S4 the attractive power distribution
BUSWAY LOW VOLTAGE (POW-R-WAY III) SECTION SECTION 16466
BUSWAY LOW VOLTAGE (POW-R-WAY III) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein
Instruction manual AS 300 CG. Waste water filtration unit. Im Geer 20, D Isselburg. Descriptioin / Type-No.: AS 300 CG Typ 539
Waste water filtration unit Manufacturer: deconta GmbH Im Geer 20, D - 46419 Isselburg Descriptioin / Type-No.: Typ 539 Table of contents on page 1 Introduction 3 2 Basic safety advice 4 2.1 Intended use
2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8" and 1/4" NPT. Features. Construction. Electrical
ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 -WAY Features -way normally closed operation Compact design Brass and 6 stainless steel
Better by being quick to translate market trends into products. In this way, our innovative strength helps you to secure competitive advantages.
02 Stainless Steel Rittal The System. The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind, we have bundled our innovative enclosure, power distribution,
SUPPLY NETWORK ANALYZER CVM-SP SERIES INSTRUCTION MANUAL ( M / 01A
SUPPLY NETWORK ANALYZER CVM-SP SERIES INSTRUCTION MANUAL ( M 981 310 / 01A ) (c) CIRCUTOR S.A. ----- CVM-SP & CVM-SP-RS485-C -------- --- Page No. 1 1.- MAIN FEATURES... 2 1.1.- Parameters measured and
Presented By. NicolScales.com Contact Us
Presented By Dallas Ft Worth ustin Houston NicolScales.com 800.225.8181 Contact Us Nicol Scales & Measurement is an ISO ccredited Calibration Company that has provided calibration, repair and sales of
Bedienungsanleitung. Operating Instructions
Bedienungsanleitung Operating Instructions ExOn8 3x400V, DX318 Extrusionstechnik GmbH Eitorfer Strasse 1 D 53809 Ruppichteroth www.dohle-extruder.de We retain all copyrights of all descriptions, drawings
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300
BSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
In-line Twin Pump. Type Series Booklet. Omega DSL
In-line Twin Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed
Computer Room Floor Grille
PI/9/1/B/2 Computer Room Floor Grille AFG TROX UK Ltd Telephone +44(0) 1842 754545 Caxton Way Telefax +44(0) 1842 763051 Thetford e-mail trox@troxuk.co.uk Norfolk IP24 3SQ www.trox.co.uk Contents Application
MGF TECHNICAL FILE MGF 400 SERIES STRUT. Description. Product Notes.
Description Highly versatile, simple to assemble, heavy duty, modular bracing strut system designed primarily to be used as intermediate struts with MGF hydraulic bracing systems. The system can also be
Mechanical Ratings. Description Plastic (800EP/ES) Metal (800EM/EB) 1/2 cycle sine wave for 11 ms and no damage at 100 G
Specifications ➊ Front of Panel (Operators) Mechanical Ratings Description Plastic (8EP/ES) Metal (8EM/EB) Vibration (assembled to panel) 1 2 Hz, 1.52 mm max./1 G max. Shock and no damage at 1 G Degree
LSA Connecting Technology. LSA Connecting Technology Distributor Cabinets and Boxes Accessories
LSA Connecting Technology www.efb-elektronik.de LSA Connecting Technology Distributor Cabinets and Boxes Accessories 224 225 Telecommunication LSA Terminal Blocks Range 1 LSA Connection Module 1/20 20pairs
bts 900x - Belt & Disc Linisher Sander 100 x 915mm (W x L) Belt Ø150mm Disc
bts 900x - Belt & Disc Linisher Sander 100 x 915mm (W x L) Belt Ø150mm Disc Ex GST Inc GST $220.00 $242.00 ORDER CODE: MODEL: Belt Size (mm): Disc Diameter (mm): Table Size (mm): Disc Table Size (mm):
Switch Disconnectors with Fuses
SENTRON 3KL up to 800 General data Overview 7 2 NSE0_01557b 4 1 5 6 7 9 8 3 3KL or 3KM basic device Plug-in contact strip for 3KM Fuses, optionally BS-88 or LV HRC fuses Terminal cover, IP20 (vertical
Series MTD Magnetic Pump
Magnetic Pump Features Close-coupled design. Polypropylene or PVDF construction. Replaceable shaft. Neodmium magnets to handle specific gravity (SG.8). Mounts to standard NEMA and IEC motor frames. Mounts
TECHNICAL BROCHURE BBLASTER. Filtered Effluent Pump
TECHNICAL BROCHURE BBLASTER Filtered Effluent Pump FEATURES Designed for pumping filtered effluent from processed septic systems only. Field Serviceable: Pump can be rebuilt in the field to like new condition
UNDERGROUND SERVICES SECONDARY
Reference UNDERGROUND SERVICES SECONDARY Underground services secondary... U- 1 General requirements for underground service... U- 2 Name of parts for underground service... U- 3 Conduit layouts... U-
Practibox ELEGANT & PRACTICAL 18 MODULES/ROW FLUSH-MOUNTING DISTRIBUTION CABINETS CATALOGUE PAGES INSIDE
Practibox ELEGANT & PRACTICAL 18 MODULES/ROW FLUSH-MOUNTING DISTRIBUTION CABINETS CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES WITH PRACTIBOX CABINETS
Wilo MC Self Priming, Horizontal Multi-Stage, High Pressure Pumps. Engineering Specification
Wilo MC Self Priming, Horizontal Multi-Stage, High Pressure Pumps Engineering Specification PART 1 - GENERAL 1.1 SUMMARY A. Furnish and install horizontal multi-stage, high pressure, self priming pressure
Pressure Booster System. Hya-Eco VP. Type Series Booklet
Pressure Booster System Hya-Eco VP Type Series Booklet Legal information/copyright Type Series Booklet Hya-Eco VP KSB Aktiengesellschaft Frankenthal All rights reserved. Contents provided herein must neither
Customer Responsibilities
Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation, please refer to this specification or set of requirements. Correct site preparation
NUCLEAR POWER CORPORATION OF INDIA LTD TECHNICAL SPECIFICATION ON SUBMERSIBLE PUMPS PAGE NO: 1 OF 4 REV NO : 0 DATA SHEET A
TECHNICAL SPECIFICATION ON SUBMERSIBLE PUMPS PAGE NO: 1 OF 4 DATA SHEET A ANNEXURE - A Sr. Item Description Sr. Item Description A. GENERAL DATA B. PUMP DUTY PARAMETERS 1. System Name 1. Rated capacity,
Micro Hydro Turbine Test Facility at the NERDC
International Conference on Small Hydropower - Hydro Sri Lanka, -4 October 007 Micro Hydro Turbine Test Facility at the NERDC T.A.Wickramasinghe and M.Narayana Department of Renewable Energy, National
ELECTRICITY OUTPUT THERMAL OUTPUT ELECTRIC EFFICIENCY THERMAL EFFICIENCY TOTAL EFFICIENCY
CHP Technical Data Sheet for T160 Natural Gas Indoor Canopy Cento Series Standard Features High performance electrical efficiency Fully modulating output 3 packages Open frame, Indoor Canopy, Outdoor Container
- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202-203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300-301 QUANTITY FOR
OVERHEAD SERVICES - SECONDARY
OVERHEAD SERVICES - SECONDARY Contents - Overhead Services... O-1 General Requirements for Overhead Service... O-2 Names of Parts for Overhead Service... O-3 Service Attachment on an Unguyed Service Mast...
Page - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB
SUBMERSIBLE MULTISTAGE PUMPS SB 3 CONTENENTS 50 Hz Page - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB 3 15-23-30-45 203 - CONSTRUCTIONS
TUNNEL54 FIRE PROOF PUNCTURE CONNECTION TUNNEL FAN POWER
SERIE TUNNEL54 FIRE PROOF PUNCTURE InsuLATION CONNECTION TUNNEL FAN POWER SUPPLY SYSTEMS FOR TUNNELS, road tunnels and major FIRE risk places the products and their recommended applications NICHE VENTILATION
NM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions. Motor
lose oupled entrifugal Pumps The electropumps NM, NM, NMS, NMS series comply with the uropean Regulation no. 7/. Materials omponents NM, NMS NM, NMS Pump casing ast iron ronze Lantern bracket NM asing
DRUM MOTOR 216LS 216.0Ø 0.11kW kW, with steel helical gearbox
5 DRUM MOTOR UNIT HANDLING Product description The drum motor 16LS is able to provide high torques and withstand high radial loads. Characteristics Salt water resistant aluminum bearing housing Induction
www.eaton.eu\busbars Power Xpert XP2 Aluminium Eaton Power Xpert XP2 is a 1000 Volt totally encased, non-ventilated, low impedance sandwich construction. The range is available from 800A - 5000A with multiple
ALUMAX. High Amperage Power Solutions
ALUMAX High Amperage Power Solutions ALUMAX: The technique As an historic leader in heavy duty designing of low voltage industrial power sockets, PALAZZOLI has enlarged its offer by developing the ALUMAX
MINOR. Electrical submersible drainage pump. Tel Fax Hz. No: PD603-EN. Revision
o: PD63-E Revision 27.12 z MIOR 793 mm Ø 286 mm Ø1 mm Weight: 2 kg P (kw) 6 (m) 4 3 2 1 4 3 3 2 2 1 1 1 1 2 2 3 3 ISO 996/A : ormal pressure : igh pressure Insulation class (IEC 8) Rated output Max. power
DESIGN. DEVELOP. DELIVER. CAPABILITY STATEMENT
DESIGN. DEVELOP. DELIVER. CAPABILITY STATEMENT Mining & Industrial Switchgear Kiosk Substations Water Infrastructure Projects Project Management Slurry Management Systems Pumping Solutions Fire Protection
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL and BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
Modular Scaffolding MEKA 48
Modular Scaffolding MEKA 48 MODULAR SCAFFOLDING MEKA 48 MODULAR SCAFFOLDING The Modular Scaffolding MEKA 48 is designed to adapt to the most complex scaffold structures. Its versatility offers a wide range
PRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
04 05 PRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES Over floor trunking 0 300 9 0 300 93 0 38 00 Conform to standard EN 50085-- For creating a link between trunking, column,
Operating & Maintenance Manual JEC JCP Series. Centrifugal Pumps
Operating & Maintenance Manual JEC JCP Series Centrifugal Pumps JEC LTD. 408, Cheongyo-ri, Bibong-myun, Hwaseong-si, Gyeonggi-do, South Korea Tel: +82 31 355 0316 Fax: +82 31 355 0319 www.jecpump.com E-mail:
Stack Parking Surface Mounted Stackers
1 / 6 Stack Parking Surface Mounted Stackers swiss-park V-2 Comfort The V-2 is designed to park cars of any size thanks to its vertical adjustability. It will accommodate cars as tall as the garage ceiling