Transcription

1 DO NOT RETURN TO RETAILER IF YOU HAVE ANY QUESTIONS OR CONCERNS PLEASE VISIT OUR WEBSITE AT: OR TOLL FREE AT: MONDAY-FRIDAY 11:30 AM TO 8:30 PM PACIFIC STANDARD TIME MONDAY-FRIDAY 8:30 AM TO 4:30 PM EASTERN STANDARD TIME SUNJOY GROUP INTERNATIONAL PTE LTD 619 Slack Street Steubenville, Ohio US

2 ASSEMBLY INSTRUCTIONS ITEM# L-GZ798PST-E SKU# GAZEBO REGENCY II W/A.I.M.

3 SAFETY INFORMATION: Please read and understand this entire manual before attempting to assemble or install the product. When installing and assembling the item, it is recommended two or more adults are involved. This product is intended for outdoor use only and should be placed on flat, horizontal ground. Ensure enough clearance around the product. Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightning. Do not climb on top of the item. Falling off it can result in serious injury, possibly even death. Never barbecue under this item or use lanterns that contain open flames. This package contains small items and plastic bags that should be kept away from children. Ensure all connectors and poles are firmly secured in position. It is important to do so before use to avoid collapsing or damage to the item, which could also result in injury. Center hook s maximum weight capacity is 26 lbs. WARNING: Keep all flame and heat sources away from the tent fabric. This tent is made with fabric that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective. Remove the roof during severe weather conditions such as sustained strong winds, hurricanes, tropical downpours and snow. The manufacturer or retailer is not liable for any loss of the product or other items due to the failure to take down the item during any inclement weather. PREPARATION: Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 30 minutes No Tools Required for Assembly.

4 Parts List Corner Panel A 4 Long Cross Beam 1 B 2 Long Cross Beam 2 C 2 Short Cross Beam 1 D 2 Short Cross Beam 2 E 2 Oblique Beam F 4 Long Middle Beam G1 2 Short Middle Beam G2 2 Bottom Long Middle Beam H 2 Bottom Short Middle Beam I 2 Bottom Oblique Beam 1 J1 2 Bottom Oblique Beam 2 J2 2 Big Roof Connector K 1 Hook L 1 Small Roof Oblique Beam M 4 Small Roof Connector N 1 Corner Shelf O 4 Big Canopy P 1

5 Small Canopy Q 1 Mosquito netting R 1 Knob S 12 Hardware Pack 1 Fig.1: Spread the Corner Panel (A) on the ground Fig.2: Insert Long & Short Cross Beam 2(C&E) into Long & Short Cross Beam 1(B&D), tighten with Knob (S). Fig.3: Insert the assembled Cross Beam (B, C, D, E) into Corner Panel (A)

6 Hardware Pack 2 Fig.4: Insert the Oblique Beam (F) into Bottom Oblique Beam (J1&J2) Fig.5: Insert the Big Roof Connector (K) into another side of the Oblique Beam (F) Fig.6: Insert the assembled Bottom Oblique Beam (J1&J2) into the Corner Panel (A) Fig.7: Insert the Middle Beam (G1&G2)into the Bottom Middle Beam (H&I) Fig.8: Insert the Long Middle Beam (G1) and Short Middle Beam (G2) into the big Roof Connector (K), attached the Hook (L) on the big Roof Connector (K) Fig.9: Insert the assembled bottom middle beams (H&I) into the Cross Beam (E&C), tighten with Knob (S), place the Big Canopy (P) to the roof, do not spread it. Fig.10: Insert the Small Roof Oblique Beam (M) into the Small Roof Connector (N) Fig.11: Attach Small Canopy (Q) to the small roof along the Small Roof Oblique Beam (M), aligning the corners and stretching it to fit. Fig.12: Insert the Small Roof Oblique Beam (M) into the Oblique Beam (F)

7 Hardware Pack 3 AA Plastic Ring 52 PCS BB Φ6X180MM 7 Stake 16 PCS Fig.13: Spread Large Canopy (P) to the roof along the Bottom Oblique Beam (J1&J2), aligning the corners and stretching it to fit. Fig.14: Place Corner Shelves (O) onto Corner Panels (A) as desired. Fig.15: Hang Mosquito netting (R) to the Cross Beams (B, C, D, E), by using Plastic Ring (AA). Fig.16: Secure the assembled gazebo to lawn with stakes (BB) through the bottom of corner panels (A). Made in China