Textile Air Dispersion Systems
|
|
|
- Jocelyn Wiggins
- 5 years ago
- Views:
Transcription
1 Textile Air Dispersion Systems Kevin J. Gebke New Product Development Engineer DuctSox ASHRAE Annual Conference 1
2 LEARNING OBJECTIVES: 1. Become familiar with air dispersion systems. 2. Understand the advantages of air dispersion systems relative to traditional metal duct systems. 3. Learn basic design principles of air dispersion systems. 4. Learn applications where textile or metal air dispersion systems are commonly employed. 5. Compare the performance of textile and metal air dispersion systems. 6. Learn of new textile and metal air dispersion system products that are becoming available commercially. ASHRAE is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported to ASHRAE Records for AIA members. Certificates of Completion for non-aia members are available on request. This program is registered with the AIA/ASHRAE for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation. 2
3 What are Textile Air Dispersion Systems? 3
4 Configuring a Textile Air Dispersion System Shape & Suspension/Fabric Retention Layout/Fittings Air Dispersion Fabric Options 4
5 Shape Round Quarter-Round D-Shape 5
6 Suspension & Retention 6
7 1, 2, or 3 Row Track or Cable Inflated Easy installation & maintenance Lowest initial cost 1 Row: 100% Deflation, Disruptive noise & fabric motion Deflated 2 Row: 45% Deflation, Noticeable noise & fabric motion 3 Row: 17% Deflation, Minor noise & fabric motion 7
8 Internal Hoop System Inflated Minimal fabric sagging and wrinkling Longer life expectancy VAV applications 1-5% Deflation No inflation noise Minimal fabric motion Deflated 8
9 Fabric Tensioning System Inflated 0% Deflation No sagging / No wrinkles Longest product life Higher design velocities No inflation noise, no fabric motion Ideal for VAV applications Deflated 9
10 Surface Mount D-Shape Quarter-Round D-Shape and Quarter-Round: For applications with finished ceilings or specialty airflow requirements 1-5% Deflation Minimum noise & fabric motion 10
11 2) Layout & Fittings 11
12 Layout Simple and efficient layouts compared to metal 12
13 Fittings Radius Elbows Transitions Take-Offs Crosses 13
14 3) Air Dispersion 14
15 Air Dispersion Air-Porous Fabric Nozzles Fixed Linear Vents Adjustable Orifices 15
16 4) Fabric 16
17 Fabric Options Porous: No condensation, replaces double-wall duct Non-Porous: Replaces single-wall duct 17
18 Fabric Porous: No condensation, replaces double-wall duct Non-Porous: Replaces single-wall duct 18
19 5) Options 19
20 Options Dampers Airflow control and helps offset effects of static regain 20
21 Damper 21
22 Damper: Uses Balance Static Regain Flow Straightener Stage Inflation Balancing 22
23 Code Compliance Air Dispersion Systems Shall: 1. Be installed entirely in exposed locations. 2. Be utilized in systems under positive pressure. 3. Not pass through or penetrate fire-resistant rated construction. 4. Be listed and labeled in compliance with UL
24 24
25 25
26 26
27 27
28 28
29 29
30 30
31 31
32 Kevin Gebke 32
2017/12/8 SPECIFICATION 2017 VERSION 1.0 NANOSOX FABRIC AIR DISPERSION SYSTEM
2017/12/8 SPECIFICATION 2017 VERSION 1.0 NANOSOX FABRIC AIR DISPERSION SYSTEM All rights reserved. Unless otherwise specified, no part of the following standards and specification may be reproduced or
Fundamentals of Test & Balance for Engineers, Cx & Energy Providers Course Number: CXENERGY1619
AABC Commissioning Group AIA Provider Number 50111116 Fundamentals of Test & Balance for Engineers, Cx & Energy Providers Course Number: CXENERGY1619 Jim Hall, PE, TBE, CxA Systems Management & Balancing,
Better Air Dispersion for. Critical. Environments
Better Air Dispersion for Critical Environments LabSox TM Products are Fabric Air Dispersion Devices designed for laboratory environments (vivariums, pharmaceutical, research education, etc.) in critical
Fan Efficiency Grade Classification for Fans
Fan Efficiency Grade Classification for Fans Dr. Michael Brendel Lau Industries/Ruskin Company Dayton, OH USA ASHRAE Annual Meeting 2012 San Antonio, TX Learning Objectives 1. Describe Fan Efficiency Grade
SECTION AIR TERMINAL UNITS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
SECTION AIR OUTLETS AND INLETS
PART 1 - GENERAL 1.1 DESCRIPTION A. Roof Curbs SECTION 23 37 00 AIR OUTLETS AND INLETS SPEC WRITER NOTE: 1. Delete between //----// if not applicable to project. Also delete any other item or paragraph
Cementitious Wood Fiber Ceiling and Wall Solutions
November 2017 Course Number: ArmTEC099 Cementitious Wood Fiber Ceiling and Wall Solutions Cementitious Wood Fiber Products 2 Tectum Inc. is a Registered Provider with The American Institute of Architects
Price Flat Faced Displacement Diffusers
Price Flat Faced Displacement Diffusers Division 23 Heating, Ventilating, and Air Conditioning Section 23 37 13 Diffusers, Registers, and Grilles PART 1 GENERAL 1.01 Section includes: A. Flat Faced Displacement
Level 1 Modules tdp-101 hvac industry overview tdp-103 concepts of air conditioning tdp-102 abcs of comfort
TDP-101 HVAC Industry Overview This TDP provides a general overview of the commercial HVAC industry and provides an awareness of the design process and construction. The documents involved in construction,
Seminar 4 Energy Performance of Active Chilled Beam Installations
Paul Christy Superintendent Clark County Public Schools paul.christy@clark.kyschools.us Seminar 4 Energy Performance of Active Chilled Beam Installations Successful Application of Chilled Beams in a High
Passive House Northwest AIA CEU Provider
Passive House Northwest AIA CEU Provider Multifamily Ventilation Strategies Workshop AIA Course # phnw Matt Groves, Albert Rooks March 11, 2016 Credit(s) earned on completion of this course will be reported
BUILD. CONNECT. ACHIEVE.
Continuous Commissioning How to make big Data work for you Michael P. Johnson BUILD. CONNECT. ACHIEVE. Business Development Executive 0 AIA Quality Assurance The Building Commissioning Association is a
Air Distribution Specialist
Air Distribution Specialist A Division of Faisal Jassim Group About Us Flowtech Air Distribution is a division of Faisal Jassim Group, a well-established group, specializing in the engineering, nanufacturing
Proceedings of Clima 2007 WellBeing Indoors
Experimental Study of Thermal Environment and Comfort in an Office Room with a Variable Air Volume (VAV) System under Low Supply Air Temperature Conditions Mari-Liis Maripuu Chalmers University of Technology,
Reducing Maintenance-Water Consumption in Evaporative Cooling Equipment
Reducing Maintenance-Water Consumption in Evaporative Cooling Equipment Mark Modera Western Cooling Efficiency Center University of California, Davis June 25, 2013 Seminar 24 ASHRAE Summer Meeting Learning
ACOUSTICAL WALL TREATMENT SECTION 09840
ACOUSTICAL WALL TREATMENT PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Site-fabricated, stretched fabric acoustical wall system built with rigid polymer stretching system to secure fabric over the wall
OBTAINING LEED CERTIFICATION FOR TOILET PARTITIONS. By AMPCO Products, LLC
OBTAINING LEED CERTIFICATION FOR TOILET PARTITIONS By AMPCO Products, LLC AMPCO PRODUCTS is a registered provider with The American Institute of Architects Continuing Education Systems. Credit earned on
1.02 Related Sections A. Section Heating, Ventilation and Air Conditioning (HVAC). C. Section Pneumatic and Electric Control HVAC.
PART 1: GENERAL 1.01 Section Includes A. Dual duct terminal units. B. Variable volume regulators. C. Integral damper motor operators. D. Integral controls. 1.02 Related Sections A. Section 23 00 00 Heating,
Air Dispersion Direction Diagram of CFD Airflow System Simulation
urkeesox Air ispersion ystem With utilization of professional uniform velocity air dispersion controlling technology, non-linear conic air duct is designed and manufactured to achieve the optimum spatial
The Role of Control Layers in Building Enclosure Design
The Role of Control Layers in Building Enclosure Design COLIN SHANE M.ENG., P.ENG. ASSOCIATE, SENIOR PROJECT MANAGER OCTOBER 13, 2016 Disclaimer: This presentation was developed by a third party and is
Reducing Hospital Energy Use and Maintaining Savings. Glen Anderson, PE
Reducing Hospital Energy Use and Maintaining Savings Glen Anderson, PE AIA Quality Assurance The Building Commissioning Association is a Registered Provider with The American Institute of Architects Continuing
RETRO-COMMISSIONING: AN OWNER S LOOK AT THE TRUE COSTS AND RETURN ON INVESTMENT. Adam Renzi, PE
RETRO-COMMISSIONING: AN OWNER S LOOK AT THE TRUE COSTS AND RETURN ON INVESTMENT Adam Renzi, PE AIA Quality Assurance The Building Commissioning Association is a Registered Provider with The American Institute
SECTION AIR-TO-AIR ENERGY RECOVERY EQUIPMENT
SECTION 23 72 00 AIR-TO-AIR ENERGY RECOVERY EQUIPMENT PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
Project Information: Scott Bloom, PE, LEEDTM AP Energy Information: Dennis Elliot, PE, CEM
The University of California, Office of the President is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be
ACOUSTICAL DUCT & PIPE LAGGING INDUSTRIAL NOISE CONTROL PRODUCTS
23 07 13 ACOUSTICAL DUCT & PIPE LAGGING INDUSTRIAL NOISE CONTROL PRODUCTS ACOUSTICAL DUCT AND PIPE LAGGING Acoustical Lagging is wrapped around the outside of duct or pipe to reduce the radiated noise
Practical Differences in Working With Low & High Glide Blends, and Implications for Retrofitting. Stephen V. Spletzer
Practical Differences in Working With Low & High Glide Blends, and Implications for Retrofitting Stephen V. Spletzer 2014 ASHRAE Winter Conference New York, NY January 22, 2014 Learning Objectives 1. Describe
STANDING SEAM METAL ROOFING. Presented by MBCI Credit: 1 AIA LU/HSW AIA course number: SSRLU2B
STANDING SEAM METAL ROOFING Presented by MBCI Credit: 1 AIA LU/HSW AIA course number: SSRLU2B Credit earned on completion of this course will be reported to AIA CES for AIA members. To receive a certificate
LEED for Homes Approved ID Request:
LEED for Homes Approved ID Request: Introduction The following is an Innovative Design Request (IDR) that has been approved for broader use in for the LEED for Homes program. This credit should not be
Water Penetration and Air Leakage Testing of Flanged Window Details
Water Penetration and Air Leakage Testing of Flanged Window Details T. Brown, J. Posenecker, K. Simon BES/Terracon and JE Dunn Construction Air Barrier Association of America (ABAA) is a Registered Provider
Continuing Education System
Continuing Education System This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or
Learning Objectives! R Values. R-value Myth Busting. Dr John Straube, P.Eng. Building Science Corp Associate Professor University of Waterloo
Better Buildings by Design R-Value "Myth Busting" February 9, 2012 Efficiency Vermont is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES). Credit(s)
Installation Guide D-Shape
Installation Guide D-Shape Thank you for selecting a DuctSox ventilation system. This guide should be helpful for installing Surface Mount Suspension Systems. Sections of fabric will be labeled, assembled,
LATERAL DRIFT DESIGN IN COLD FORMED STEEL WALL SYSTEMS
1 LATERAL DRIFT DESIGN IN COLD FORMED STEEL WALL SYSTEMS Thomas Castle, S.E. 2 This presentation is published by the Cold-Formed Steel Engineers Institute ( CFSEI ). The information herein shall not constitute
Noise Control. Commercial, Industrial, and Environmental Products and Solutions.
Noise Control Commercial, Industrial, and Environmental Products and Solutions www.kineticsnoise.com Commercial Duct Silencers Kinetics Noise Control offers the design and engineering assistance to integrate
Performance Monitoring for Efficiency
Performance Monitoring for Efficiency THOMAS ANDERSON, CCP EMILY CROSS, MASc, PEng, CEM Burlington, Vermont cx associates.com tom@cx associates.com emily@cx associates.com Efficiency Vermont is a Registered
A Protocol. Advanced Air Sealing
A Protocol Advanced Air Sealing Efficiency Vermont is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES). Credit(s) earned on completion of this program
Wood Frame STUDENT HOUSING
The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES). Credit(s) earned on completion of this program will be reported to AIA/CES
PECI s RCx Programs: The Next Generation. Michelle Lichtenfels Program Manager PECI
PECI s RCx Programs: The Next Generation Michelle Lichtenfels Program Manager PECI AIA Quality Assurance Learning Objectives 1. Understand the background and history of PECI s 2006-2009 California RCx
Karl Helmink, P.E., CEM Retrocommissioning Manager University of Illinois. Retrocommissioning Saving the Planet One Building at a Time
Karl Helmink, P.E., CEM Retrocommissioning Manager University of Illinois Retrocommissioning Saving the Planet One Building at a Time AIA Quality Assurance Portland Energy Conservation, Inc is a registered
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 102239 - FOLDING PANEL PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Modular Wood Framing Goes Vertical
Modular Wood Framing Goes Vertical By: Troy Bean, P.E., S.E. DCI Engineers January 2013 The Wood Products Council is a Registered Provider with. Credit(s) earned on completion of this program will be reported
Chilled Beams Selection BY DAN INT-HOUT, FELLOW ASHRAE; AND LILLI WILBAR
This article was published in ASHRAE Journal, November 2014. Copyright 2014 ASHRAE. Reprinted here by permission from ASHRAE at www.krueger-hvac.com This article may not be copied nor distributed in either
Section SoundPly LR M25 Acoustic Ceiling Panels
Section 095126 Acoustic Ceiling Panels PART 1 GENERAL 1.1 RELATED DOCUMENTS 1.2 SUMMARY A. Drawings and general conditions of the Contract, including General and Supplementary Conditions and Division 1
BUILDING ENCLOSURE AIR TIGHTNESS TESTING Course Number: BCLUNA018-01P
BUILDING ENCLOSURE AIR TIGHTNESS TESTING Course Number: BCLUNA018-01P Provider Number:404108121 Darek Brandt, PE Chief Engineer, Building Science Solutions AIA CES DISCLAIMER Credit(s) earned on completion
Wireless Pneumatic Thermostats:
Wireless Pneumatic Thermostats: Quality Commissioning is Essential Peter Pollard, P.E. Principal kw Engineering AIA Quality Assurance The Building Commissioning Association is a Registered Provider with
Advantages and Disadvantages of using the ASHRAE Tracer Gas Test Method for the Chemical Laboratory Hood Certification
CASE Case Western Reserve University Advantages and Disadvantages of using the ASHRAE 110-1995 Tracer Gas Test Method for the Chemical Laboratory Hood Certification Mahdi Fahim, MS Chicago, IL 2006 ASHRAE
SECTION AIR DISTRIBUTION
SECTION 15880 AIR DISTRIBUTION PART 1 GENERAL 1.1 SUMMARY A. This section describes minimum requirements, products and methods of execution relating to the project air distribution systems. PART 2 PRODUCTS
Copyright Materials 11/8/2012. Learning Objectives
Copyright Materials This presentation is protected by US and International Copyright laws. Reproduction, distribution, display and use of the presentation without written permission of the speaker is prohibited.
UNIVERSITY OF NORTH FLORIDA Arena HVAC Replacement
SECTION - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
Achieving acoustical standards in the classroom Study of HVAC systems and classroom acoustics
Achieving acoustical standards in the classroom Study of HVAC systems and classroom acoustics Trane believes the facts and suggestions presented here to be accurate. However, final design and application
YORK BULKHEAD MOUNTED CHILLED BEAMS ENGINEERING GUIDE
YORK BULKHEAD MOUNTED CHILLED BEAMS ENGINEERING GUIDE Contents YORK Bulkhead Active Chilled Beams 3 CB-ABB-YK / CB-ABC-YK Performance Data 5 CB-ABB-YK Dimensions 10 CB-ABC-YK Dimensions 11 Specifications
FEDERAL EMERGENCY MANAGEMENT AGENCY FEMA 414/January 2004 INSTALLING SEISMIC RESTRAINTS FOR DUCT AND PIPE
FEDERAL EMERGENCY MANAGEMENT AGENCY FEMA 414/January 2004 INSTALLING SEISMIC RESTRAINTS FOR DUCT AND PIPE Notice: This guide was prepared by the Vibration Isolation and Seismic Control Manufacturers Association
Incorporating Uncertainty Analysis into a Building Retrofit Analysis Using OpenStudio and EnergyPlus
Incorporating Uncertainty Analysis into a Building Retrofit Analysis Using OpenStudio and EnergyPlus Hayes Zirnhelt 1, Ellen Franconi 1, Nicholas Long 2, Brian Ball 2 1 Rocky Mountain Institute 2 National
Learning Objectives. Copyright Materials
INNOVATION IN ARCHITECTURAL STRUCTURE: ALLOWING THE DESIGN TO LEAD Wood Solutions Fair Long Beach, CA March 2, 2011 The Wood Products Council is a Registered Provider with The American Institute of Architects
ACBC Floor Mounted Active Beam
Floor Mounted Active Beam The Price Floor Mounted Active Beam,, is designed for occupant comfort. It provides high cooling and heating capacities while simultaneously supplying ventilation air from a DOAS
Thermal Bridging Solutions. Improving Building Envelope Performance
Thermal Bridging Solutions Improving Building Envelope Performance AIA Best Practices Armatherm sponsors this program provided by Hanley Wood, a Registered Provider with the American Institute of Architects
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 23 3114 - DUCTWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Book Division 01 Specification
ASHRAE Chapter Meeting HVAC Noise & Vibration Control Specifications & Best Practices
ASHRAE Chapter Meeting HVAC Noise & Vibration Control Specifications & Best Practices Industrial Presented By OEM Architectural Noise & Vibration Control, Inc. 610-863-6300 www.brd-nonoise.com HVAC Marine
Steel Louvered Supply/Return Grille
500 Steel Louvered Supply/Return Grille Typical Applications Most commonly used in sidewall applications, 500 Series grilles are available with both supply and return constructions options. With a variety
Code Compliance for Fire Resistance-Rated Assemblies in Light-Frame Buildings
Code Compliance for Fire Resistance-Rated Assemblies in Light-Frame Buildings Michelle Kam-Biron, PE, SE, SECB Senior Director, Education American Wood Council Copyright This presentation is protected
Gypsum 101. An AIA Continuing Education Program. Mundise Mortimer National Gypsum Company
Gypsum 101 Mundise Mortimer National Gypsum Company 2001 Rexford Road Charlotte, NC 28211 704-365-7494 MMortimer@nationalgypsum.com www.nationalgypsum.com Please note: you will need to complete the conclusion
UNDERFLOOR DISTRIBUTION PRODUCTS UFAD
PRODUCTS Round Diffusers Rectangular Diffusers Segmented Linear Diffuser Continuous Linear Plenum Power Supply Module Extruded Aluminum Grille Perimeter Heat/Cool Convector System Airflow Panel UNDERFLOOR
Applying the Building Code During Design
Applying the Building Code During Design A Step-By-Step Process AIA Learning Units The Salt Lake City CSI Chapter is a Registered Provider with The American Institute of Architects Continuing Education
A. This Section includes ceiling- and wall-mounted diffusers, registers, grilles and louvers.
SECTION 23 37 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Section SoundPly RF M25 Acoustic Wall Panels
Section 097714 Acoustic Wall Panels PART 1 GENERAL 1.1 RELATED DOCUMENTS 1.2 SUMMARY A. Drawings and general conditions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Cementitious Wood Fiber Products For Ceilings, Walls, and Roof Decks
November 2017 Course Number: AIA - ArmTEC098 IDCEC Cementitious Wood Fiber Products For Ceilings, Walls, and Roof Decks Cementitious Wood Fiber Products 2 Armstrong World Industries is a Registered Provider
Meeting Residential Energy. Construction. Copyright Materials. Loren Ross, P.E. Manager, Engineering Research American Wood Council
Meeting Residential Energy Requirements with Wood-Frame Construction Loren Ross, P.E. Manager, Engineering Research American Wood Council Copyright Materials This presentation is protected by US and International
Optimizing BAS Information for Operator Effectiveness and Optimal Control
Optimizing BAS Information for Operator Effectiveness and Optimal Control Len Beyea, CBCxP, EBCxP, HBDP, CEM, LEED AP Principal RetroCom Energy Strategies, Inc. AIA Quality Assurance The Building Commissioning
Towards Earthquake-Proof Wood Buildings
Towards Earthquake-Proof Wood Buildings Full-scale shake table test of a two-story mass timber building Presented by Shiling Pei, Ph.D. P.E. Colorado School of Mines Disclaimer: This presentation was developed
TDPs provide you with new technical training materials designed to help your contractors, engineers, and designers to effectively design, specify,
TDP Catalog TDPs provide you with new technical training materials designed to help your contractors, engineers, and designers to effectively design, specify, sell, and apply HVAC equipment in commercial
NV series. Induction VAV air volume control terminals
NV series Induction VAV Table of contents Description Page Type designation 1 Technical data - General 2 - Specification 3 - Installation instruction 3 overview / dimensions 4-5 Sound data NVOAOOB 6-7
Passive House Northwest
Passive House Northwest AIA CEU Provider Passive House Case Studies: Roy Passivhaus, Owl Haven Passive, and View Haus 5 AIA Course # phnw087 Various March 27, 2015 Owl Haven Passive Owl Haven Passive House
Monitoring-Based Commissioning: A Case Study in Higher Education. Janelle H. Griffin, PE, CCP, LEED AP
Monitoring-Based Commissioning: A Case Study in Higher Education Janelle H. Griffin, PE, CCP, LEED AP AIA Quality Assurance The Commissioning Association is a Registered Provider with The American Institute
lindab we simplify construction Lindab Ventilation More than ducting
lindab we simplify construction More than Ducting Lindab Ventilation More than ducting A complete ventilation package Lindab solutions comprise all the elements needed to execute a complete ventilation
Square and Rectangular Directional Diffusers
Square and Rectangular Directional Diffusers Product Overview Price offers a complete line of square and rectangular directional diffusers for a velocity of. Models SMD / AMD This series of louvered face
Keene Building Products
Keene Building Products Keene Building Products is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported
Stage: A Case Study. Course Description. Learning Objectives
Arena Stage: A Case Study Brought to Lifeto The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES), Provider #G516. Credit(s)
Sustainability and Energy Use
AIA Provider #: 40108008 Sustainability and Energy Use AIA Course #: SUS101 Presented by: Jason Borowski, PE LEED AP BD+C, Vice President jborowski@centuryeng.com 1 Sustainability and Energy Use Credit(s)
Commissioning Case Study: University of Iowa s Bowen Science Building HVAC Modernization Project Course Number: CXENERGY1630
AABC Commissioning Group AIA Provider Number 50111116 Commissioning Case Study: University of Iowa s Bowen Science Building HVAC Modernization Project Course Number: CXENERGY1630 John G. Bixler, PE, LEED
2008 Questions & Solutions Engineering, Inc.
BNP Media is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported to CES Records for AIA members. Certificates
Leveraging Brute Force. Steve Cook // The Walsh Group // 03 November 2011
Leveraging Brute Force Steve Cook // The Walsh Group // 03 November 2011 The Associated General Contractors of America (AGC) is a Registered Provider with The American Institute of Architects Continuing
Ultra-Thin Prestressed Precast Panel Technology
Ultra-Thin Prestressed Precast Panel Technology AIA/CES PROGRAM PURPOSE AltusGroup Inc. is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on
Multi-Cavity Insulating Glass Units
Multi-Cavity Insulating Glass Units GANA is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported to
Metal Roofing. The Devil is in the Details SSRLU3B. I LU/HSW Hour
Metal Roofing The Devil is in the Details SSRLU3B I LU/HSW Hour Best Practice Slide MBCI is a Registered Provider with the American Institute of Architects Continuing Education Systems. Credit earned on
Project Management. Time and Resources DPLE 157
Project Management Time and Resources DPLE 157 RLI Design Professionals is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this
Building Enclosure Design Fundamentals, Components, and Assemblies
Building Enclosure Design Fundamentals, Components, and Assemblies COLIN SHANE M.ENG., P.ENG., P.E. PRINCIPAL, SENIOR PROJECT MANAGER RDH BUILDING SCIENCE INC. JULY 11, 2018 Disclaimer: This presentation
NVR / NVS / NVF / NVA
NVR / / NVF / NV Product Overview Models Rectangular Roof Stack Unit Square Roof Stack Unit Facade Mounted Natural Vent Wall Mounted Transfer Unit NVR NVF NV The Price natural ventilation system operates
Energy Efficiency: Designing Wood-Frame Buildings for Occupant Comfort
Please add relevant logo here Energy Efficiency: Designing Wood-Frame Buildings for Occupant Comfort Presented by: Peter J. Arsenault, FAIA, NCARB, LEED-AP Disclaimer: This presentation was developed by
Upcoming Courses.
Upcoming Courses www.seventhwave.org/education/events Commercial courses November 11, 2015 LEDs: technology, controls and costs Green Bay, WI Residential courses November 3, 4 and 5 Problem free basements,
SAUDI AIR CONTROL SYSTEM INDUSTRIAL REGISTRATION NO.353 FIRE DAMPERS
SAUDI AIR CONTROL SYSTEM INDUSTRIAL REGISTRATION NO.353 FIRE DAMPERS FIRE DAMPERS OUTSTANDING FEATURES: Gravity operated for vertical installation and with closure springs and latches for horizontal installation.
SECTION DUCTS PART 1 GENERAL 1.01 SUMMARY
1 1 1 1 1 1 1 1 0 1 0 1 SECTION 1 DUCTS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Duct Materials.. Insulated flexible ducts.. Single wall spiral round ducts.. Ductwork fabrication.. Duct cleaning.
Airflow in Mid to High-rise Multi-Unit Residential Buildings
Airflow in Mid to High-rise Multi-Unit Residential Buildings LORNE RICKETTS, MASC RDH BUILDING ENGINEERING LTD. VANCOUVER, BC CO-AUTHORS: GRAHAM FINCH, MASC, P.ENG. RDH BUILDING ENGINEERING LTD. DR. JOHN
Full-Scope Commissioning for High-Quality Buildings
Full-Scope Commissioning for High-Quality Buildings Pieter L. van der Mersch, PE, QCxP University of Colorado Boulder 21 st National Conference on Building Commissioning AIA Quality Assurance The Building
The International Building Code (IBC ) is a model code that provides minimum requirements to safeguard the public health, safety and general welfare
AIA Austin is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES). Credit(s) earned on completion of this program will be reported to AIA/CES for AIA
Building Enclosure Details and Assemblies for Wood-Frame Buildings
Building Enclosure Details and Assemblies for Wood-Frame Buildings COLIN SHANE M.ENG., P.ENG. ASSOCIATE, SENIOR PROJECT MANAGER RDH BUILDING SCIENCES INC. NOVEMBER 19, 2015 Disclaimer: This presentation
2017 Winter Conference. Las Vegas, Nevada. Seminar 55 Urban-Scale Energy Modeling, Part 4 PRESENTER
2017 Winter Conference Las Vegas, Nevada Michael Bobker City University of New York mbobker@ccny.cuny.edu Seminar 55 Urban-Scale Energy Modeling, Part 4 Urban-scale Building Energy Modeling: Why Working
VLD/VLV Industrial diffusers
DAL358 MADE IN VLD/VLV Industrial diffusers catalog 116 Table of content Description and benefits 1 Configuration 2 Mode of operation 3 Range of application and quick selection 4 Performance diagrams Temperature
BRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT NON-STRUCTURAL ELEMENTS # 3. Restraint systems
SEISMICALLY BRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT DESIGN CRITERIA # 2 NON-STRUCTURAL ELEMENTS # 3 Restraint systems The next step in the non-specific design pathway in NZS