Match The Product To The Purpose.
|
|
- Theodore Dorsey
- 5 years ago
- Views:
Transcription
1 Copper Stockton Products' New Moisture Management Products Provide Solutions Stockton Products offers several profiles for water management and protection. One and two-piece products offer design features that mitigate the concern of moisture penetration in a horizontal condition. All products come standard in 26 gauge G90 galvanized. Match The Product To The Purpose. Zinc Galvanized Stainless Steel Improved solid-leg design allows no opportunity for moisture penetration. Aluminum The New EWC Expansion Water-Resistant Channel (#40) The Original #40 ECS Expansion Channel Screed With the leg in the horizontal condition, the new #40 solid hem design disallows moisture penetration. The original #40 Expansion Channel Screed (to the right) is ideal for ceiling and soffit conditions, but does not offer the best option for moisture protection. Available With: Custom reveal and ground sizes Custom attachment leg lengths Weep holes Can be curved * Factory fabricated inside/outside corners Available in galvanized, zinc, aluminum, copper and stainless steel. * Please call the factory for specifications and limitations on radius curves. Available through factory authorized dealers only. Call for the dealer nearest you.
2 MSX: M-Slide Expansion Joint EWC: Expansion Water-Resistant Channel (#40) / The dual function self-aligning expansion joint provides movement capability at floor line while allow moisture to release from the top ground and lock out moisture from the bottom. Special "Step" on the attachment leg provides a locator for correct placement of the fasteners and helps keep the molding laying flat on the wall. Available with and without weep holes 1/ Holes at O. C. Longer attachment legs available. XLF: XL Foundation Screed The unique hem design stops moisture penetration in a horizontal condition. The two-piece design allows for movement. Matching factory miter-cut, solid-soldered inside and outside corners are available for most profiles. Special "Step" on the attachment leg provides a locator for correct placement of the fasteners and helps keep the molding laying flat on the wall. Available with and without weep holes 1/8" Holes at O. C. OWC: Offset Water-Resistant Channel Stucco installation guidelines require stucco to be held up off of hard scape. XLF provides an extended back leg to protect waterproof membranes. Available with and without weep holes 1/ Holes at O. C. SSF: Stucco Screed Flashing (#3) The OWC is the same as the EWC accept that it offers two leg lengths (X & Z) for situations where two dissimilar depths come together. Special "Step" on the attachment leg provides a locator for correct placement of the fasteners and helps keep the molding laying flat on the wall. Available with and without weep holes 1/8" Holes at O. C. PWC: Plaster Water-Resistant Channel SSF combines a stucco screed and head flashing into one uniformed piece. Weep screed allows moisture to escape and travel over top of flashing. SSF provides ideal water management at window head, floor line and transition to dissimilar materials. Available with and without weep holes 1/ Holes at O. C. One-piece solid-leg design feature mitigates the concern of moisture penetration in a horizontal condition. Matching factory miter-cut, solid-soldered inside and outside corners are available for most profiles, giving you moisture management confidence throughout the entire installation. Available with and without weep holes 1/8" Holes at O. C. All Products Come In 26 Gauge G90 Galvanized. Many are available in aluminum, copper, stainless steel & zinc. ASTM: A653 LFQ, C1063, B209, B69
3 TWM: T Water-Resistant Molding SST: Stucco Stop (#36) One-piece solid leg design feature mitigates the concern of moisture penetration in a horizontal condition. FWC: F Water-Resistant Channel A variation of the traditional weep screed that provides a plaster stop at the foundation line. Available with 1/ or weep holes O. C. BSS: Blind Stop Screed 2 3 One-piece design feature mitigates the concern of moisture penetration in a horizontal condition. W-S: Weep Screed (#7) A plaster stop that terminates the stucco at the base of walls or at the fascia, or fascia/soffit conditions. Also provides a drip edge and has weep holes. NFD: #5 Drip /2 A traditional weep screed that provides a plaster stop and functions as a weep screed at the foundation. Available with and without weep holes 1/ or Holes at O. C. A drip screed that helps align the soffit to give it a clean, straight edge at the fascia/soffit line. Available with key holes. All Moisture Protection Products Are Available With: Factory fabricated inside & outside corners Custom reveal and ground sizes Radius curves Custom attachment leg lengths Weep holes
4 WTP: Window Termination Point JCB: J Caulking Bead 2 3/8" 2 3/8" 3 Provides a termination/drip edge above exterior door and window openings. NOTE: When used as a drip edge over windows, proper flashing must be used in conjunction with this trim piece. DKD: Deck Diato Standard plaster stop/casing bead for terminating stucco with an extended return key for caulking. DHF: Drip Head Flashing (#6) Deck Diato combines a plaster stop for conventional 3-coat stucco and pan flashing at a wall/deck condition where a plaster stop and flashing are required. OWS: Offset Weep Screed An angled window and door head plaster stop. Custom "Z" dimension is available. TSF: Transition Step Flashing A special weep screed for those conditions where the sheer wall exceeds the foundation in plane. This special design permits the bottom leg of the weep screed to return back to the foundation. Available with and without weep holes 1/ or Holes at O. C. A step flashing for use when flashing dissimilar materials is required Stockton Products. All rights reserved worldwide. Pleae Note: Not all items are in stock, lead times may apply.
5 Metal Trim Roll And Brake Formed Metal Plaster Stops, Expansion Joints And Control Joints Galvanized Copper Zinc Stainless Steel Aluminum Welded Wire CornerAid And Other Welded Wire Products For Stucco, Drywall & Fireproofing Galvanized Stainless Steel Plastic Nose Specialty Products Decorative accessories for plaster, drywall, moisture protection, ventilation and other applications. Radius curves, corners and custom fabrication. Pozalite Pump, Hose & Gun Lubricant. Gives More Open Time, Stops Jerking & Packing Hoses Extends Pump Life Retains Moisture Makes Troweling & Cleanup Easier The originator of welded wire Corner Aid, Stockton continues to provide the lath & plaster professional with quality wire products for a variety of applications. Extruded Aluminum Standard & Custom Reveal Moldings For Stucco & Drywall Clear Anodized Alodine/Chem-Film Kynar Paint Color Anodized Enhances strength. Reduces shrinking and cracking. Saves time. Ends problems with pumping to extreme heights and distances. Now available in a 4 pound single charge package! Complete line of extruded aluminum trims for stucco and drywall. Custom shapes, curving and special fabrication available. Call 1-87-Stockton For More Information! 2011 Stockton Products. All rights reserved worldwide.
WHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED.
WHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED. Build walls and ceilings with a strong base, sturdy reinforcements and much more with Phillips extensive line of high quality products. As a single source
More informationEXTRUDED ALUMINUM ώά ώά ώά ώά ώά ώά ώά ώά
EXTRUDED ALUMINUM A comprehensive line of etruded aluminum products for drwall, plaster and stucco applications. These products are designed so that the can be curved for installation. Gives ou more options
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS DAVIS, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationFiber Cement Panel Moldings
www.stocktonproducts.com Six New Profiles To Choose From! Fiber Cement Panel Moldings Stockton Products now offers a complete line of extruded aluminum moldings for use with 5/16" Fiber Cement Panels.
More informationGalvanized Steel Bead Accessories for Stucco and Plaster Installations ALABAMA METAL INDUSTRIES CORPORATION. Contract Number:
SUBMITTAL SUBMITTAL TRANSMITTAL DETAILS AMICO Galvanized Steel Bead Accessories for Stucco and Plaster Installations Project Submittals as manufactured by Submittal Date: Contract : Project Name: Section
More informationJC Code & Construction Consultants, Inc. Advanced Training: The FBC & ASTM C 1063
JC Code & Construction Consultants, Inc. Advanced Training: The FBC & ASTM C 1063 1 Welcome! This course was developed by : JC Code & Construction Consultants, Inc. DBPR Provider Number 0003379 www.jccode.com
More informationZinc Alloy Bead Accessories for Stucco and Plaster Installations ALABAMA METAL INDUSTRIES CORPORATION
SUBMITTAL SUBMITTAL TRANSMITTAL DETAILS AMICO Zinc Alloy Bead Accessories for Stucco and Plaster Installations Project Submittals as manufactured by Submittal Date: Contract : Project Name: Section : Contractor
More informationSECTION PLASTER TRIM AND ACCESSORIES
SECTION 09205 PLASTER TRIM AND ACCESSORIES Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2013-2013 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Plaster
More informationPanel Clip with (2) ¼ 14 x 2 Fasteners at Each Panel Joint. Base Angle. Fasteners to Concrete 24 O/C Base Z Flashing
EXTERIOR BASE DETAIL (FLUSH) EXTERIOR BASE DETAIL (OVERHANG) Base Trim with Panel Clip with (2) ¼ 14 x 2 Fasteners at Each Panel Joint Sealant Marriage Bead to Vertical Panel Joint Above and Below Z Flashing
More informationAugust, 2016 SECTION 09271
SECTION 09271 GYPSUM BOARD ** ACCESSORIES ** PART 1 - GENERAL 1.1 SUMMARY A. Related work specified elsewhere includes: 1. Rough carpentry. 2. Finish carpentry and millwork. 3. Metal support systems. 4.
More informationProduct Brochure. Masonry Drainage and Ventilation Products
Product Brochure Masonry Drainage and Ventilation Products Every building professional who works with masonry knows the #1 reason masonry buildings fail is moisture trapped behind the veneer. Professionals
More informationPerimeter Relief and Control Joints in Fire-Rated Gypsum Board
Perimeter Relief and Control Joints in Fire-Rated Gypsum Board In multi-family residential construction, involving fire-rated assemblies stress relief in the firerated assemblies is important, but often
More informationArchitectural Wall Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Wall Products Guide Specifications FORMED METAL WALL PANELS This Guide Specification is
More informationSECTION ROOF SPECIALTIES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 71 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationSECTION ALUMINUM HANDRAIL SYSTEMS
SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American
More informationCAN BE CURVED. Feet Per. Note: Standard length is 10 feet. Additional lengths available upon request.
AA: ArchAid Designed for smooth, symmetrical arches and curves with minimal distortion. Enables faster construction of inside and outside curves. It has standard 2 3/8 legs; one is rigid and one is flexible
More informationSPECIFICATIONS Section Cantilevered Walkway Cover
Part 1: General 1.1 Related Documents SPECIFICATIONS Section 107301 Cantilevered Walkway Cover A. The requirements of Division 1 specifications shall apply to work specified in the section. 1.2 Engineering
More information1 Exam Prep Architectural Sheet Metal Manual Tabs and Highlights
1 Exam Prep Architectural Sheet Metal Manual Tabs and Highlights These 1 Exam Prep tabs are based on the 2012 Sheet Metal and Air Conditioning Contractors' National Association, Inc., seventh edition.
More informationUltrakote Cementitious Finish System
Part 1 GENERAL 1.01 SECTION INCLUDES A. Ultrakote exterior wall system: one coat stucco, acrylic primer, cementitious finishes and protective coatings. 1.02 RELATED SECTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9.
More informationSheet Metal Flashing and Trim
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 076200 - Sheet
More informationInspection Fundamentals: Stucco & EIFS
Inspection Fundamentals: Stucco & EIFS By Ben Gromicko To be able to identify the stucco system you must understand system components. You should understand the basic components of the most common stucco
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 092216 - NON-STRUCTURAL METAL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationExpansion Joint Covers (079513)
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
More informationSECTION STAINLESS STEEL WALL PANELS
SECTION 07400 PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Dry joint, Rainscreen stainless steel wall panel system. 2. Accessories including attachments, clips, sub girts, shims, and fasteners 3.
More informationArchitectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL ROOF AND WALL PANELS This Guide Specification is to be used
More informationARCHITECT PRODUCT SPEC GUIDE
ARCHITECT PRODUCT SPEC GUIDE I-Studs & Fire Rated Assemblies Metal Channels & Interior Framing Structural Framing Metal Lath Stucco, Veneer, Plaster Beads & Trims Metal Beads & Trims Vinyl Beads & Trims
More informationOCS ONE COAT STUCCO A custom blend of Portland cement, sand, extenders, fiber reinforcement and modifiers.
OCS ONE COAT STUCCO A custom blend of Portland cement, sand, extenders, fiber reinforcement and modifiers. Designed to save material by functioning as an exterior cladding in thicknesses ranging from 3/8
More informationEXCEL Medical Waste - Equipment Installation Section SECTION GYPSUM BOARD
SECTION 09 29 00 GYPSUM BOARD PART 1 - GENERAL 1.1 DESCRIPTION This section specifies installation and finishing of gypsum board. 1.2 RELATED WORK A. Installation of steel framing members for walls, partitions,
More informationSECTION ALUMINUM WALKWAY COVERS. A. The requirements of Division 1 specifications shall apply to work specified in the section.
SECTION 10 5300 ALUMINUM WALKWAY COVERS Part 1 General 1.01 Related Documents A. The requirements of Division 1 specifications shall apply to work specified in the section. 1.02 References A. International
More informationINTRODUCTION Twentieth-century stucco wall claddings
It has long been determined that incidental moisture can find its way past the cement stucco membrane on framed walls and with proper design, detailing and installation, the assembly works. However, excessive
More informationFinestone Stucco Ultra Wall System
Finestone Stucco Ultra Wall System Premium impact and puncture resistant, rain screen design cement plaster stucco system with enhanced water management Typical Details BLANK PAGE Finestone Stucco Ultra
More informationMetafor Panel System Installation Guide
Installation Guide innovative cladding design solutions Product Description Universal Flashing Kit Supplemental Guide for VM Pro-Zinc Training To enroll in a VM PRO-ZINC Training Course contact: UMICORE
More informationSECTION GYPSUM BOARD ASSEMBLIES
PART 1 - GENERAL 1.1 SUMMARY SECTION 09 21 16 A. Provide gypsum board assemblies as shown and specified. Work includes: 1. Walls, partitions, and soffits, including metal framing systems. 2. Acoustical
More informationMoisture Management for Masonry
Moisture Management for Masonry Products Brochure 800.664.6638 mortarnet.com THE ORIGINAL MORTAR DROPPING COLLECTION DEVICE Over 20 years of installations. Thousands of walls. Not a single wall failure.
More informationSERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651
SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows as
More informationAmeriplate. Rain Screen Wall System
Ameriplate Rain Screen Wall System Efficiency and fascinating free-floating effects are hallmarks of Metalwërks Ameriplate wall systems. With Ameriplate, the cut edges of the face plate material are the
More informationSiding and Soffit Installation Guidelines
Siding and Soffit Installation Guidelines email web phone 07 46 16 Longboard Siding & Soffit INTRODUCTION INSTALLATION GUIDELINES NOTE: These instructions are prepared for persons experienced in the field
More informationFull-Line Product Catalog from PHILLIPSmfg.com. Download a FREE
Download a FREE Full-Line Product Catalog from PHILLIPSmfg.com Also available online: - LEED Form - Installation Instructions - Packaging Sheets - Assembly Drawings - And much more! Metal Beads & Trims
More informationWATERGATE COMMUNITY ASSOCIATION 8 Captain Drive Emeryville, California Office: / Fax: WINDOW REPLACEMENT GUIDELINES
WINDOW REPLACEMENT GUIDELINES GENERAL 1. Complete and receive approval for WCA s Unit Modification Application for window replacement. 2. Obtain a permit for replacement window installation from the City
More informationSECTION PREFORMED CLADDING. A. Part A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 074213 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. Part A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationAmeriplate. Rain Screen Wall System
Ameriplate Rain Screen Wall System Efficiency and fascinating free-floating effects are hallmarks of Metalwërks Ameriplate wall systems. With Ameriplate, the cut edges of the face plate material are the
More informationMETALWORKS Torsion Spring
METALWORKS Torsion Spring Assembly and Installation Instructions 1. GENERAL 1.1 Product Description MetalWorks Torsion Spring is a downward accessible aluminum ceiling panel available in standard 2' x
More informationCaulks & Sealants. Professional. Catalog
Caulks & Sealants Professional Catalog TM WeatherMaster Sealant Titebond WeatherMaster Sealant has been specifically formulated to outperform all other sealant technologies, including silicones, tripolymers
More informationWATER MANAGEMENT PRODUCTS
WATER MANAGEMENT PRODUCTS ALSO AVAILABLE IN G D E A I B H F C A #15 Solid Leg* F #9 Transition Control Joint* B M-Slide Expansion Joint * G #6 Drip Head C J-Series Casing Bead H #17 Base Flashing* D #3
More informationExpansion Joint Covers
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
More informationSECTION METAL FLAT LOCK TILE PANELS
SECTION 07 4213 METAL FLAT LOCK TILE PANELS This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can
More informationGuide Specifications- Section
Guide Specifications- Section 084113 LaCantina ALUMINUM Folding Door System PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum and glass folding door system with fingertip operation up to 52 wide and 10
More informationTender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Extruded aluminum windows with fixed sash..2 Factory glazed..3 Perimeter sealant. 1.2 RELATED SECTIONS.1 Section 05500 - Metal Fabrications.2
More informationSection Metal Lath and Accessories
Section 09 22 36.23 Metal Lath and Accessories This master specification has been prepared by AMICO, Alabama Metal Industries Corporation to assist design professionals in specifying This may be used as
More informationOmniplate Barrier Wall System
is an economical barrier wall system with visible caulk joints at all horizontal and vertical panel joints. As a barrier wall, serves as the primary weather barrier for the building envelope. It can be
More informationStructalath Twin Trac 316 System Section Corporate P.O. Box 397 Fortson Georgia FAX Technical
PART 1 GENERAL 1.01 SECTION INCLUDES A. Materials and installation of a Master Wall Cemplaster Fiberstucco system. B. System shall consist of the following components: Item WRB01 CFS03 Description Weather
More informationPART 1 / GENERAL SECTION ALUMINUM PLATE PANEL SYSTEM. ALPLY Insulated Panels. Alply TECH WALL Aluminum Plate System 2002
SECTION 07 42 13 ALUMINUM PLATE PANEL SYSTEM ALPLY Insulated Panels Alply TECH WALL Aluminum Plate System 2002 PART 1 / GENERAL 1.1 SYSTEM DESCRIPTION A. Preformed Aluminum Plate System for Screen wall
More informationST. JOHNS COUNTY ARCH. PROJ. NO SECTION PREFABRICATED ALUMINUM CANOPIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 10530 PREFABRICATED ALUMINUM CANOPIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationAND ACCESSORIES FOR DRYWALL CONSTRUCTION
STEEL TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION Quality in your corner. THE STRENGTH WITHIN MONTREAL TORONTO CALGARY EDMONTON VANCOUVER STEEL TRIMS AND ACCESSORIES for Construction BAILEY HAS YOUR
More informationIce Rink Renovation & New Clubhouse
SECTION 074243- METAL COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationAddendum # 6. Date: March 16, 2017 RFT Construction of New Building Addition to the Town of Caledon Yard 1 Garage Building
Addendum # 6 Date: March 16, 2017 RFT 2017-08 Construction of New Building Addition to the Town of Caledon Yard 1 Garage Building Closing Date: Friday, March 17, 2017 2:00 PM This addendum refers to additions,
More informationDrywall & Veneer Accessories ACCESSORY SPECIFICATIONS
All products conform to ASTM D1784 cell classification 13244C Accessories ACCESSORY SPECIFICATIONS 1. NAME Rigid Vinyl Accessories Rigid Vinyl also known as PVC (Unplasticized Chloride) 2. MANUFACTURER
More informationSpecifications for FL-100 Soffit Panel
Union Corrugating Company Specifications for FL-100 Soffit Panel SECTION 07410 METAL SOFFIT PANELS PART 1 GENERAL 1.1 DESCRIPTON A. Section Includes: 1. Preformed metal soffit panel system 2. Associated
More informationStudent Services & Classroom Addition
SECTION 074243 - METAL COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION METAL FRAMED SKYLIGHT. A. Engineering, preparation of fabrication drawings and structural calculations for the entire skylight system.
SECTION 08625 METAL FRAMED SKYLIGHT PART 1 GENERAL 1.01 SECTION INCLUDES: A. Engineering, preparation of fabrication drawings and structural calculations for the entire skylight system. B. Fabrication
More informationPRESTON HEALTH SERVICES ARCHITECT'S NO. 2700
SECTION 09 5113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationArchitectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL WALL PANELS This Guide Specification
More informationArcwall. Rain Screen Wall System
Arcwall Rain Screen Wall System Arcwall is an economical drained and back-ventilated rain screen system for both walls and soffits manufactured from formed aluminum or stainless plate. The system combines
More informationSPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide
More informationLather (Interior Systems Mechanic) Level 3
Level 3 Lather/Interior Systems Mechanic (ISM) Unit: B3 Blueprint Reading and Specifications 3 Duration: 35 hours 20 hours 15 hours This unit is designed to provide the apprentice with the knowledge and
More informationSPECIFICATIONS Section Gable Walkway Covers
Part 1: General 1.1 Related Documents SPECIFICATIONS Section 107303 Gable Walkway Covers A. The requirements of Division 1 specifications shall apply to work specified in the section. 1.2 Engineering Design
More information* Other widths available upon request. 24 Gauge Galvalume - Standard Surface. Other gauges and aluminium available upon request.
is a concealed fastener architectural standing seam roof panel. The panels are easily installed over decking, utilizing metal clips. panels are ideally suited for decorative mansard, fascia and roofs.
More informationDist. by: BEST MATERIALS Ph:
Dist. by: BEST MATERIALS Ph: 800-474-7570 www.bestmaterials.com Email: Sales@BestMaterials.com FLASHING SYSTEM ENGINEERED PRODUCT SYSTEMS PRODUCT BROCHURE Distributed by: BEST MATERIALS Distributed by:
More informationStandard Installation Fire Damper Models: 119, 119(F), 119(SS), D19
Standard Installation Fire Damper Models: 119, 119(F), 119(SS), D19 Page 1 or 8 APPLICATION This fi re damper is intended to restrict the passage of fl ame. The standard installation requires that the
More informationInstallation Guide. Titan Slate. Rev102606
Installation Guide Titan Slate Rev102606 Titan Manufacturing 200 bella citta blvd. Davenport, fl 33897 Phone: (920) 716-1411 Fax: (866) 601-4395 www.titanroofsystems.com This document includes the recommended
More informationMoisture Management for Masonry
Moisture Management for Masonry Includes NEW LATHNET Drainage & Lath in One Complete Products Brochure 800.664.6638 mortarnet.com THE ORIGINAL MORTAR DROPPING COLLECTION DEVICE Over 20 years of installations.
More information2002 Advanced Building Products, Inc., P.O. Box 98, Springvale, Maine TEL: ; FAX: ; WEBSITE:
SECTION 07651 FLEXIBLE COPPER SHEET FLASHINGS Advanced Building Products, Inc. manufacturer many types of flexible copper sheet flashings. Due to their ductility, high tensile strength, and resistance
More informationSTANDARD PRODUCTS - CUSTOM LOOK
AXIOM ClOUDS STANDARD PRODUCTS - CUSTOM LOOK AXIOM AXIOM can give your next space a unique and crisp feel. The AXIOM family offers dramatic visuals with a variety of flat vertical trims and design profiles.
More informationSTUCCO FAILURES and REMEDIATION Roger G. Morse AIA
STUCCO FAILURES and REMEDIATION Roger G. Morse AIA Morse Zehnter Associates Rensselaer Technology Park 165 Jordan Road Troy, NY 12180 rgmorse@mzaconsulting.com Florida Environment Hot Humid High ground
More informationFACE CFP - HORIZONTAL PANELS - OPTION 'B'
- Vertical Transitions 12F - H10.3 VHB TAPE 5.000" 127.0mm 5" FORMED TRANSITION STRIP w/ FLAT FACE CFP - - OPTION 'B' H10.3 CONCEALED FASTENED Panel Index 12F - H0 BASE DETAILS JOINT DETAIL PARAPET ROOF
More informationSECTION Specification for Building Limes Specification For Building Sands from Natural Sources Methods of Tests for Paints.
SECTION 09200 PART 1 - GENERAL 1.01 DESCRIPTION A. Extent of Work: The extent of lath and plaster work is shown on the drawings and in schedules and includes interior and exterior plaster work, and fibreglass
More informationLymTal International, Inc.
Iso-Flex Deck-Lock Installation Instructions Figure 1 (Parts Drawing) SPLIT SLAB/PLAZA DECK JOINT COVER SYSTEM Installation Instructions The following installation instructions are very important. Read
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 095113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationMARQUIS Tualatin FIBER-CEMENT SIDING June 15, rev
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes: 1. Reinforced fiber-cement shingle panel siding, 2. Reinforced fiber-cement lap siding. B. Related Sections: 1. Division 1 Section "Quality Requirements"
More informationStudent Services & Classroom Addition
SECTION 095133 - ACOUSTICAL METAL PAN CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationArcwall. Rain Screen Wall System
Rain Screen Wall System is an economical drained and back-ventilated rain screen system for both walls and soffits manufactured from formed aluminum or stainless plate. The system combines excellent performance
More informationDIVISION 04 MASONRY CAST STONE. A. Design Considerations. 1. Cast stone shall comply with ASTM C1364, Standard Specification for Cast Stone.
DIVISION 04 MASONRY 04720 CAST STONE A. Design Considerations 1. Cast stone shall comply with ASTM C1364, Standard Specification for Cast Stone. 2. Care must be taken in the design of individual units
More informationDIVISION 7 THERMAL AND MOISTURE PROTECTION
DIVISION 7 THERMAL AND MOISTURE PROTECTION UCSC Campus Standards Handbook Waterproofing Standards 07100 1 SECTION 07100: WATERPROOFING STANDARDS A. Guarantee 1. Provide a guarantee on Contractor's letterhead
More informationSECTION SLIDING PATIO DOORS. Display hidden notes to specifier by using Tools/Options/View/Hidden Text
SECTION 08260 SLIDING PATIO DOORS Display hidden notes to specifier by using Tools/Options/View/Hidden Text PART 1 GENERAL 1.1 SECTION INCLUDES A. Vinyl sliding patio doors (Spencer Walcott). 1.2 RELATED
More informationSiding and Soffit Installation Guidelines
Siding and Soffit Installation Guidelines email web phone 07 46 16 Longboard Siding & Soffit INTRODUCTION INSTALLATION GUIDELINES NOTE: These instructions are prepared for persons experienced in the field
More informationSECTION POLYPROPYLENE FABRIC WALL COVERING
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 09 72 31 POLYPROPYLENE FABRIC WALL COVERING SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or paragraph not
More informationSpecifiers: Click on the icon in the WORD toolbar to reveal detailed instructions
Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions (Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying perforated
More informationSECTION ORNAMENTAL ALUMINUM RAILING
SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Pipe Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in concrete.
More informationLather/Interior Systems Mechanic (ISM) Level 3
Level 3 B3 Blueprint Reading and Specifications 3 Duration: 35 hours 20 hours 15 hours This unit is designed to provide the apprentice with the knowledge and skills of blueprint reading and specifications.
More informationSenergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board
Senergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board NOTES Senergy Platinum CI Stucco Typical details for an
More informationNortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1
16 May 2014 Page 1 PART 1 GENERAL 1.1 DESCRIPTION This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More informationSECTION ORNAMENTAL ALUMINUM RAILING
SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Decorative Wire Rope Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in
More informationA. Provide all labor, equipment, and materials fabricate and install the following. 2. Counterflashings over bituminous base flashing.
SECTION 076200 - FLASHING AND SHEET METAL PART 1 GENERAL 1.1 SECTION INCLUDES: A. Provide all labor, equipment, and materials fabricate and install the following. 1. Edge strip and flashing. 2. Counterflashings
More informationSTEEL STUD, TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION MONTREAL TORONTO CALGARY EDMONTON VANCOUVER THE STRENGTH WITHIN
STEEL STUD, TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION MONTREAL TORONTO CALGARY EDMONTON VANCOUVER THE STRENGTH WITHIN STEEL STUD AND TRACK FOR DRYWALL PARTITIONS TAKE ADVANTAGE OF THE SAVINGS IN TIME
More informationSentry Stucco Ultra Wall System
Typical Details Sentry Stucco Ultra Wall System Premium impact and puncture resistant, rain screen design cement plaster stucco system with enhanced water management 1. Typical Sentry Stucco Ultra Wall
More informationA. Environmental Limitations: Comply with ASTM C 840 requirements or gypsum board manufacturer's written instructions, whichever are more stringent.
SECTION 092900 - GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More information