Civil and Environmental Engineering
|
|
- Wilfrid Robertson
- 6 years ago
- Views:
Transcription
1 Civil and Environmental Engineering Civil and Environmental Engineering Laboratories Lab Name Location Person in Charge Programs Served Courses Served Structure Laboratory M Ahmed Shweiki Civil and Environmental Engineering(BSC &MSCE) Material for Civil Engineering Mechanics of Material Materials Laboratory M Nabila al Hawawini Civil and Environmental Engineering(BSC &MSCE) Mechanical Engineering Architectural Engineering Material for Civil Engineering Advanced Concrete Technology Advanced Materials in Construction Geotechnical Laboratory M Mohamad Qisiah Civil and Environmental Engineering(BSC &MSCE) Geotechnical Engineering Advanced Geotechnical Engineering Soil Improvement Soil Dynamics Surveying Laboratory W Priya kaimal Civil and Environmental Engineering(BSC &MSCE) Surveying Fluid Mechanics and Water Resources Laboratory M Nuha Adam Civil and Environmental Engineering(BSC &MSCE) Sustainable Renewable Energy Fluid Mechanics Hydraulics Water Resources Hydraulic Structures Fluvial Hydraulics Transportation Laboratory W Ahmed Shweiki Civil and Environmental Engineering(BSC &MSCE) Transportation Applied Traffic Operations Pavement Design Environmental Laboratory W Loubna Chaabi Civil and Environmental Engineering(BSC &MSCE) Biotechnology Chemistry Health science Nutrition Introduction to Environmental Engineering Wastewater Treatment and Reuse Instrumental Chemistry, Health Sciences Courses Research projects for health sciences and dentistry and pharmacy Mechanics of Materials Laboratory M Nabila al Hawawini, Ahmed Shweiki Civil and Environmental Engineering(BSC &MSCE) Mechanical engineering Architectural engineering Mechanics of Material Engineering Workshop M Keezhilath Madhu Engineering College Industrial Manufacturing Serves all the college of engineering in different student projects 31
2
3 Tests and Services Steel Truss with GUNT 32 Channel Data Acquisition Bending Moments in a Beam Shear Force in a Beam Deflection of Beams and Cantilevers Bending Stress in a Beam Torsion Test Beam Apparatus: CR 3000 MICROLOGGER & RELAY MULTIPLEXER with Support Software VISHAY 7000 Micro Measurements with Vishay Micro Controller Software Large Scale Specimens, Scaffoldings, Beams, Columns, Walls, etc. 33
4
5 Tests and Services The following are the tests that may be performed in UOS Laboratories: Fresh Concrete Testing Mix Design Workability Air Content Density Aggregate, Cement Mortar Testing Sampling of Aggregate Specific Gravity & Water Absorption Abrasion of Aggregates Particles Size Distribution (Sieve Analysis) Flakiness and Elongation Indexes Consistency and Setting Time of Cement & Gypsum Cement Setting Time and Compressive Strength Heat of Hydration of Cement Hardened Concrete Testing Permeability Flexural Strength Compressive Strength Indirect Tensile of Concrete Density & Water Absorption Chloride Penetration Shrinkage of Concrete Restrained Shrinkage Cracking Non-Destructive Testing of Hardened Concrete Cracks Detection and Movement, Width Measurement SHMIDT Hammer Testing for Compressive Strength Ultrasonic Testing for Concrete In situ Moisture Content Measurement Steel Rebar Location & Cover (Covermeter) Chloride Ion Penetration Tester (CIP) Free Shrinkage Measurement Corrosion Activity of Rebar 35
6
7 Rock Testing Point Load Test Unconfined Compression Soil Consolidation Test One-Dimensional Consolidation Test Measure Consolidation Characteristic Soil Permeability Coefficient Determination Swell/Collapse Tests In-Situ Testing Field Density Test Manual Subsurface Boring Tests Dynamic Cone Pentrometer Digital Load Cell Pentrometer Insitu and Lab Electrical Resistivity Test Soil Permeability Testing Falling Head Permeability Constant Head Permeability Particle Size and Index Properties Testing Grain and Particle Size Determination Sieve and Hydrometer Tests Liquid Limit Test Plastic Limit Test Shrinkage Limit Test Soil Compaction Test Standard & Modified Proctor Tests Field Density Test Soil and Water Chemical Testing Content Test: Sulfate, Chloride, Carbonate Organic Matter and Gypsum Conductivity Test ph Measurement Test 37
8
9 Fluid Mechanics and Water Resources Laboratory Introduction The Fluid Mechanics and Water Resources Laboratory contains modern instruments and apparatuses for teaching and researches purposes. Some of the instruments and equipment can well be utilized for industrial use with minor modifications. The laboratory is supervised by experienced teaching staff and technicians with services meeting the highest of international standards. Equipment and Instruments Pump Test Apparatus Pressure Gauges Calibrator Determination of Fluid Properties Apparatus Pelton Wheel Hydraulic Ram Apparatus Standard Hydraulic Bench Bernoulli s Apparatus Center of Pressure Apparatus Free and Forced Vortices Apparatus Open Channel-Flow Visualization Bench Reynolds Apparatus Determination of Capillary Rise of a Liquid Apparatus Air Flow Bench Apparatus Rainfall-Runoff Hydrographic Apparatus Rainfall Simulator Apparatus Field Drain filter Test Apparatus Sedimentation Transport Apparatus Network of Pipe Apparatus Determination of Liquid Surface tension Apparatus Viscometer Apparatus Friction Losses in Pipes Apparatus Boundary Layer Experiment Hydrostatic Force Apparatus Flow Measuring Apparatus Impact of Jets Apparatus Seepage Flow Apparatus Permeability Apparatus Pressure Transducer Apparatus 39
10
11 Transportation Lab Introduction The Transportation and pavement Laboratory is furnished with a great deal of state-of-theart equipment. This equipment is used to collect and analyze data needed for the study and development of different types of transportation systems used on streets to major freeways. Students are trained on the use of this equipment to a high level of accuracy and safety. Much of the equipment can be installed and used for traffic data collection and to run traffic counts at different types of locations such as minor and major interchanges. They can also be utilized to analyze existing traffic problems, such as congestion and accidents. In addition, the Transportation and pavement lab is also equipped with machines to test asphalt concrete material (i.e. asphalt, bitumen and asphalt mixes). Equipment and Instruments Lane Traffic Counters Lane Traffic Detectors Video Detectors Intersection Turning Movement Counters (Digital and Mechanical) Traffic Analysis Software Speed Radar Guns Marshall Test Apparatus Digital Measuring Wheel Bitumen and Asphalt Ductility Saybolt Furol Viscometer Bitumen Consistency and Penetration Bitumen Content by Ignition Method Experiments Traffic Counting Traffic Trend Analysis Traffic Studies Traffic Impact Studies Asphalt Content of Hot-Mix Asphalt by Ignition Method Marshall Properties Tests Bitumen Content Ductility of Bitumen Viscosity of Bitumen 41
12
13 Environmental Laboratory Introduction The Environmental Laboratory carries out scientific investigations on fresh and marine water quality, wastewater treatment, industrial waste management, solid waste management, environmental impact monitoring, environmental information systems, geo-environmental studies, and environmental site investigations. Equipment and Instruments Gas Chromatography / Mass Spectroscopy (GC/MS) Gas Chromatography (GC) Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) Bench Top Stirred Pressure Reactor Ion- Chromatograph Automatic Weather Station Deep Wells Water Quality & Velocity Apparatus Multi Parameter of Data Logger Total Organic Carbon (TOC-VCPH) Spectrophotometers (DR/4000, DR2800, DR/2010) Fast Fat Extraction System Binocular Microscope Biotrace Uni-Lite Xcel Illuminometer Digestion System ( Digesdahl digestion Apparatus, Microwaves Digestion ) Jar Tester ph Meter, Turbidity Meter, Conductivity Meter, Dissolved Oxygen Meter, BOD Track, COD Reactor, Furnaces, Ovens, and etc Water, Soil and Sediment Sampling Equipment Deep Wells Water Quality & Velocity Apparatus Multi Parameter of Data Logger System Automatic Weather Station Tests and Services Fresh Water, Groundwater and Marine Water Quality *ph, Salinity, Conductivity, BOD, COD, TOC, Coliform Bacteria, Nitrogen, Heavy metals, Ammonia, Sulphates, Phosphorus, Turbidity, Color, hydrocarbons, Gravimetric Analysis for Solids, Transparency, Chlorophyll etc. Water and Wastewater Treatability Testing (Physical, Chemical and Biological Treatment) 43
14
15 Mechanics of Materials Laboratory Introduction The Mechanics of Materials Laboratory for the Civil & Environmental Engineering Department is equipped with different educational and training set-ups to support the theoretical part of education. The main objective of the Mechanics of Materials Laboratory is to teach students both the basic principles and the advanced concepts of mechanics of materials. The educational and training set-ups in the lab put theory into practice and students become more interested and involved in various subject matter. Equipment and Instruments SM04 STR2 STR3 STR4 STR5 STR6 MF40 Tests and Services - Beam Apparatus - Bending Moment in a Beam Apparatus - Shear Force in a Beam Apparatus - Deflection of a Beam Apparatus - Bending Stress in a Beam Apparatus - Torsion of Circular Sections Apparatus - Materials Lab with Data Capture Beam Apparatus Bending Moment in a Beam With STR2000 Software Shear Force in a Beam Deflection of Beams & Cantilevers Bending Stress in a Beam Torsion of Circular Sections Load Frame with Digital Load Extensometer 45
16
17 Experiments Gear Manufacturing Practice Turning and Taper Turning Welding Practice Carpentry Practice Tests and Services Lathe Machine: This equipment is very useful in fabricating threaded, nuts and bolts for heavy equipment machineries (cars, oil drilling machineries etc.) Welding Machine: This machine is very useful in fabrication of welded steel structures like steel beams and steel columns Universal Milling Machine: This machine could be used in the manufacture of gears, grooves, slots and many others 47
Civil and Environmental Engineering
Central Laboratories Catalog Civil and Environmental Engineering Civil and Environmental Engineering Laboratories Lab Name Location Person in Charge Programs Served Courses Served Structure Laboratory
More informationStandard Testing & Engineering, LLC
Standard Testing & Engineering, LLC dba Standard Testing & Engineering Company in Oklahoma City, Oklahoma, USA has demonstrated proficiency for the testing of construction materials and has conformed to
More informationStandard test method for organic impurities in fine aggregates for concrete. Standard test method for chemical analysis of hydraulic cement
IAS Accreditation Number TL-454 Company Name (QEL)- Foreign Branch Address Shed-9, Building-2189, Road-1529, Block 115 P.O. Box 50191 Hidd Kingdom of Bahrain Contact Name Sreekala Prabasankar, Technical
More informationFollowing are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.
CODES & STANDARDS FOR ON-SITE TESTING LABORATORY Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner. Codes & Standards are published
More informationDiscipline Mechanical Testing Issue Date Certificate Number T-1169 Valid Until Last Amended on
Last Amended on 08.06.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Reinforcing Bar Nominal mass of HSD rebar IS 1786: 2008 (RA 2013) 0.075 kg/m to 15 kg/m Tensile Test of HSD rebar 2. Strands
More informationDepartment of Civil Engineering. Consultancy Experiments and Charges
Department of Civil Engineering Consultancy Experiments and Charges TRANSPORTATION ENGINEERING LABORATORY Rate Per Test (Rs.) S.N0. Test Name Proposed = Existing existing *1.5 1 CBR @ Field moisture Contents
More informationRegistration for Experimental Work
University of Malta Faculty for the Built Environment Department of Civil and Structural Engineering Registration for Experimental Work Name of Researcher / Student: Telephone number: Mobile number: Email
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
More informationSCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4 PROFESSIONAL SERVICES Principal Engineer / Geologist $160.00 per hour Senior Engineer / Geologist $160.00 per hour Senior Environmental Scientist
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA Jeff Roberts Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA 50309 Jeff Roberts Phone: 515 282 8818 Valid To: April 30, 2019 Certificate Number: 0576.01 In recognition
More informationIndex FM 5-472/NAVFAC MO 330/AFJMAN (I)
RETURN TO TOC FM 5-472/NAVFAC MO 330/AFJMAN 32-1221(I) Index A accelerators, 4-7 additive, 5-1, 5-2, 5-5, 5-6 admixtures, 4-2, 4-3, 4-7, 4-8, 4-9, 4-20 adsorption, 2-6, 2-7 aerial photographs, 2-28, 2-30,
More informationCivil Engineering Dept
LAB DETAILS The Civil Engineering department has Eight Laboratories with advanced equipments. It also has two additional workshops/labs. All the experiments performed in the laboratories emphasize on the
More informationLaboratory Certification For. Build Afghanistan Engineering Services (BAES) Laboratory
Laboratory Certification For Build Afghanistan Engineering Services (BAES) Laboratory Lab ID: LCP-017 Issue date: Oct 5, 2016 Expiry date: April 4, 2017 This Extension letter confirms the completion of
More informationFaculty of Civil Engineering B.E. Civil Engineering (R 2013) Semester III. Requirements for a batch of 30 students
(R 20) Semester III CE SURVEY PRACTICAL I Requirements for a batch of 0 students Total Station.. 7. 8. 9. 0. Theodolites Dumpy level Plane table Pocket stereoscope Ranging rods Leveling staff Cross staff
More informationFlood Testing Laboratories, Inc.
in Chicago, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More informationFHWA-Central Federal Lands Highway Division
in Denver, Colorado, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More information(DEPARTMENT OF CIVIL ENGINEERING)
CONSULTANCY & MATERIAL TESTING SERVICES (DEPARTMENT OF CIVIL ENGINEERING) VNR VIGNANA JYOTHI INSTITUTE OF ENGINEERING & TECHNOLOGY Bachupally, Nizampet( S.O.),Hyderabad -500 090 Phone: 040-23042758/59/60
More information2. To determine Normal Consistency, Initial & Final setting time, Specific Gravity, fineness & compressive strength of Cement (IS: )
List of Experiments: CIVIL ENGINEERING MATERIAL LAB 1. Identification of Materials by Visual Inspection 2. To determine Normal Consistency, Initial & Final setting time, Specific Gravity, fineness & compressive
More information+91-8048762011 Scientific & Technological Equipment Corporation http://www.stecoscientific.com/ We are a well acclaimed enterprise, engaged in the manufacture and delivery of a vast collection of Material
More informationLIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
More informationFrom: Samaniego, Eric E@DOT Date: Tue, Jul 1, 2014 at 8:38 AM Subject: FW: FW: City of Los Angeles 2014 QAP To: "ray.solomon@lacity.org" Cc: "Kumar,
More informationGENERAL EQUIPMENT. 3 Electronic analytical balance (320gr capacity - 0,001gr readability)
1. Laboratory Equipment Every laboratory equipment has its own calibration certificate and is operatedmaintained according to its manual guide. The equipment of the laboratory is listed below. The laboratory
More informationGOVERNMENT ENGINEERING COLLEGE BANSWARA
GOVERNMENT ENGINEERING COLLEGE BANSWARA CIVIL ENGINEERING DEPARTMENT Date: Third year students of Civil Engineering, B.Tech has visited BVM Vallabh Vidyanagar from 27/04/2018 to 02/05/2018. During the
More informationCollege of Computing, Engineering & Construction Civil Engineering Course Descriptions
CATALOG 2010-2011 Undergraduate Information College of Computing, Engineering & Construction Civil Engineering Course Descriptions CEG3011C: Geotechnical Engineering 4 Prerequisites: CES 3104C, CWR 3201.
More informationCriterion 7. Facilities
2011 EAC/ABET Self-Study Report: Temple University Civil and Environmental Engineering Criterion 7 - Page 1 Criterion 7. Facilities The CEE Department s teaching and research activities take place primarily
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHWEST GEOTECH, INC. d/b/a NORTHWEST TESTING, INC. 9120 SW Pioneer Court, Suite B Wilsonville, OR 97070 Thomas Ginsbach, P.E. Phone: 503 682 1880 Valid To:
More information(laboratory) (fall semester)
Civil Engineering Courses-1 CIV 211/Surveying Prerequisite: MAT 127 An introduction to the theory and applications of modern surveying processes. Students use optical and digital land surveying instruments
More informationPRI Asphalt Technologies, Inc.
in Tampa, Florida, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QC LABORATORIES, INC. 10810 Northwest Freeway Houston, TX 77092 Damon Dolat Phone: 713 695 1133 Valid to: July 31, 2018 Certificate Number: 1127.01 In recognition
More informationLaboratory Certification For. Reno Geotech & Construction Material Testing Company
Laboratory Certification For Reno Geotech & Construction Material Testing Company Lab ID: LCP-011 Issue date: June 10 th, 2018 Expiry date: Dec 9 th, 2018 This letter confirms the completion of inspection
More informationJAZAN UNIVERSITY. CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory
JAZAN UNIVERSITY College of Engineering CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory The Equipment The Purpose To determination of compressive strength of samples Bricks,
More informationDetails of Laboratory
Details of Laboratory Strength of Materials Laboratory Strength of materials is one of the core subjects in mechanical engineering. It is the physical science that looks at the reaction of a body to movement
More informationOklahoma DOT Central Laboratory Test List
Aggregate Count of Tests: 21 Aggregate Durability Index 00091 T210 AR Bulk Density and Voids 00086 T19 AR Clay Lumps and Friable Particles 00080 T112 AR OHDL9-OHDL38 Dust Coating of Cover Aggregates 00149
More information1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
More informationLABORATORY INSPECTION INFORMATION REQUEST
LABORATORY INSPECTION INFORMATION REQUEST This information will assist in the processing of laboratory inspections. The inspection is a two-man day comprehensive review that includes review of the quality
More informationSTRATA Certified Laboratory Tests
STRATA Certified Laboratory Tests Table 1. List of Certified Soil Tests 1 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2 ASTM D 698-12 Standard Test Method for Compaction Characteristics
More informationFHWA-Western Federal Lands Highway Division
in Vancouver, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationDiscipline Mechanical Testing Issue Date Certificate Number T-2522 Valid Until Last Amended on - Page 1 of 13
Bureau Veritas (India) Pvt. Ltd. - Construction Services, Last Amended on - Page 1 of 13 I. MECHANICAL PROPERTIES OF MATERIALS 1. Steel Reinforcement Weight/meter IS 1786: 2008 (RA 2013) 0.1 kg to 20 kg
More informationPennoni Associates, Inc.
in Bethlehem, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationLaboratory Certification For. National Engineering Services for Rehabilitation of Afghanistan (NESRA)
Laboratory Certification For National Engineering Services for Rehabilitation of Afghanistan (NESRA) Lab ID: LCP-004 Issue date: Feb 15 th, 2018 Expiry date: Aug 14 th, 2018 This extension letter confirms
More informationUPSC ESE/IES Civil Engineering Syllabus
1 UPSC ESE/IES Civil Engineering Syllabus PAPER I 1. Building Materials: Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminum, Fly Ash, Basic Admixtures, Timber, Bricks and Aggregates: Classification,
More informationBeyond Engineering & Testing, LLC.
in Round Rock, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
More informationRadhey Testing & Consultants Pvt. Ltd., B-363, Kalindi Vihar, Agra, Uttar Pradesh. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 10 I. BUILDING MATERIALS 1. Aggregates (Coarse & Fine) Sieve Analysis IS 2386 (Part 1) 1963 (RA 2002) 4.75 mm to 100 mm 0.150 to 4.75 Specific Gravity IS 2386 (Part 3) 1963
More informationCivil Engg. Department Semester : 5
Civil Engg. Department Semester : 5 Teaching Scheme Course Code Course Name Lecture hours Tutorial hours Practical hours Credit CE 3001 Matrix Analysis of Structures 1 1 0 2 CE 3002 Soil Mechanics 3 1
More informationLaboratory Certification For. Delta Afghan Technical Engineering Services (DATES)
Laboratory Certification For Delta Afghan Technical Engineering Services (DATES) Lab ID: LCP-026 Issue date: Jan 6 th, 2019 Expiry date: July 5 th, 2019 This letter confirms the completion of inspection
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. 3011 South Huson Street, Suite A Tacoma, WA 98409 Eric Allen Phone: 253 589 1804 Valid To: December 31, 2019 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OTTO ROSENAU & ASSOCIATES, INC. 6747 Martin Luther King Jr. Way S. Seattle, WA 98118 Judi Rosenau-Payseno Phone: 206 725 4600 Valid To: February 28, 2019 Certificate
More informationGeoTesting Express, Inc.
in Acton, Massachusetts, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
More informationWe are renowned manufacturers, exporters and suppliers of a superior quality range of Testing Machines for extensive industrial usage.
+91-8048078596 Veekay Industries http://www.veekayindustries.org/ We are renowned manufacturers, exporters and suppliers of a superior quality range of Testing Machines for extensive industrial usage.
More informationExclusive Services for Infrastructure / Civil Sector
Exclusive Services for Infrastructure / Civil Sector Introduction Spectro Analytical Labs is pioneer in providing Material, Inspection, Non Destructive analysis of various structures. Spectro provides
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CARLSON TESTING, INC Hudson Avenue, NE Salem, OR James Hathaway, PE Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARLSON TESTING, INC. 4060 Hudson Avenue, NE Salem, OR 97301 James Hathaway, PE Phone: 503 589 1252 Valid To: January 31, 2020 Certificate Number: 0258.03 In
More informationMethod of Test For In-Place Density of Treated and Untreated Soils and Aggregates
Rev. 04-12-17 Aggregates and Soils T102H T103G T104D T106B T107B T108C T111D T112F T115D T116A T200E T203G T206G T209C T210J T211J& T212J T224C T227I T228C T230D T235B Method of Test For In-Place Density
More informationASTM Volume 04.08, March 2017 Soil and Rock (I): D421 D5876
Table of Contents 1 D425-88(2008) Standard Test Method for Centrifuge Moisture Equivalent of Soils 2 D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures 3
More informationLIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
More information(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
More information(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
More informationGeotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
More informationMechanical Engineering Workshop. Location: Block G, L1. Lab Facilities
Mechanical Engineering Workshop Location: Block G, L1 Lathe Lathe Digital machine. Wood Cutting Saw machine. Milling machine. Hydraulic Press. Drilling machine (vertical). MIG Welding machine. Arc welding
More informationHISTORICAL PERSPECTIVES OF TXDOT MATERIALS. Footer Text
HISTORICAL PERSPECTIVES OF TXDOT MATERIALS WHAT HAS CHANGED OVER THE LAST 40 YEARS Construction Materials and Technology Table of Contents 1 Hot Mix Asphalt and Asphalt Binder 4-21 2 Concrete, Cement,
More informationFaculty of Mechanical Engineering B.E. Material Science and Engineering (R 2013) Semester III. Requirements for a batch of 30 students
CE635 (R 203) Semester III STRENGTH OF MATERIALS LABORATORY. Universal Tensile Testing machine with double shear attachment 40 Ton Capacity Torsion Testing Machine (60 NM Capacity) Impact Testing Machine
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. HTS, INC. CONSULTANTS 416 Pickering Houston, TX Terry J. Jackson, P.E. Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HTS, INC. CONSULTANTS 416 Pickering Houston, TX 77206 Terry J. Jackson, P.E. Phone: 713 692 8373 Valid To: October 31, 2018 Certificate Number: 0029.01 In recognition
More informationCourse Descriptions. CIV 202 Surveying (3 = 2 + 1) Prerequisite: FES 270
Course Descriptions CIV 100 Civil Engineering Drafting (3 = 3 + 0) Prerequisite: FES 113 This course introduces the principles and processes of engineering design and drafting. It explores the role of
More informationTerracon Consultants, Inc.
in College Station, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationCourse Concrete Technology Course Code Theory Term Work POE Total Max. Marks Contact Hours/ week
Course Concrete Technology Course Code 43588 Examination Scheme Theory Term Work POE Total Max. Marks 100 50 -- 150 Contact Hours/ week 3 2 -- 5 Prepared by Mr. C.S. Patil / Mr. S.P. Patil Date Prerequisites
More informationM/s. NILAWAR LABORATORIES, NAGPUR
M/s. NILAWAR LABORATORIES, NAGPUR M/s. Nilawar Laboratory, has started functioning in the year 2001 in Nagpur. It has been established with a firm commitment to deliver the best service in terms of most
More informationWiss, Janney, Elstner Associates, Inc.
in Northbrook, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationNelson Testing Laboratories
in Elmhurst, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
More informationB.Sc. Course Description for Courses Offered By The Civil Engineering Department
B.Sc. Course Description for Courses Offered By The Civil Engineering Department (X, Y, Z) : X= Lecture hours, Y = Practical hours, Z= Course Credit hours * = Co-requisite Course 110401211 Statics: (3,0,3),
More informationCapability Statement
Capability Statement Trilab is Australasia's leading independent supplier of specialised soil and rock mechanics testing, to the Asia-Pacific mining, civil construction and infrastructure industries. Two
More informationIAS Accreditation Number Materials Testing and Inspection 2791 South Victory View Way Boise, Idaho 83709
IAS Accreditation Number Company Name Inspection Address 2791 South Victory View Way Boise, Idaho 83709 Contact Name Elizabeth Brown, P.E. Corporate Quality Manager Telephone (208) 376-4748 Effective Date
More informationDEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355 REPLY TO ATTENTION OF USACE-EC-TSB 1 June 2013 (Expiration: 2 June 2015) 2013 INSPECTION AND CERTIFICATION
More informationGeotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
More informationBrooks/Cole Thomson LearningiM. Fundamentals of Geotechnical Engineering. Braja M. Das. California State University, Sacramento
Fundamentals of Geotechnical Engineering Braja M. Das California State University, Sacramento Brooks/Cole Thomson LearningiM Australia Canada Mexico Singapore Spain United Kingdom United States CHAPTER
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
More informationCONCRETE MATERIALS PROPERTIES AND TESTING
CONCRETE MATERIALS PROPERTIES AND TESTING 1 Concrete ingredients Cement Fine aggregate Coarse aggregate Water Admixtures 2 3 4 Properties of cement Physical properties of cement Fineness Standard consistency
More informationCourse Outcomes ( )
Course Outcomes (2016-2017) Basic Civil Engineering FIRST SEMESTER B. E. C101.1 Know the scope of civil engineering in various fields and understand and describe the basic terms related to survey, planning,
More information2501 PART V SECTION 2501 PART V
SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable procedures as outlined in the KDOT Construction Manual, Part V. This includes, but is not limited
More informationDIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
More informationSTRUCTURAL MODELING AND. Harry G. Harris. . Drexel University Philadelphia, Pennsylvania. and. Gajanan M. Sabnis. Howard University Washington, D.C.
STRUCTURAL MODELING AND EXPERIMENTAL TECHNIQUES SECOND EDITION Harry G. Harris. Drexel University Philadelphia, Pennsylvania and Gajanan M. Sabnis Howard University Washington, D.C. CRC Press Boca Raton
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
More informationAction Recommendation: Budget Impact:
City of Fayetteville Staff Review Form Matt Casey 1/30/2019 ENGINEERING (621) Submitted By 2019 0086 Legistar File ID 2/19/2019 City Council Meeting Date Agenda Item Only N/A for Non Agenda Item Submitted
More informationTopic wise Tests. Numerical Methods, Probability and Statistics, Laplace transform & Fourier series
Test No Topic code Topic CE-01 CE-02 GEM-1 (Engineering Mathematics) GEM-2 (Engineering Mathematics) Topic wise Tests Each test carries 25 marks and 45 minutes duration Test consists of 5 one mark questions
More informationBhumi Research Centre (Civil Engineering Testing Laboratory), 2/1362, 'Bhumi House', Sagrampura, Ring Road, Surat, Gujarat
Bhumi Research Centre (Civil Engineering Testing ), Last Amended on - Page 1 of 6 AT LABORATORY I. SOIL & ROCK 1. Soil Grain Size Analysis IS 2720 (Part 4): 1985 Rev. 2, (RA 2007) Hydrometer Analysis IS
More informationGEOTECHNICAL THE BEST IN TEST AGGREGATE
GEO THE BEST IN TEST AGGREGATE Catalog 2018 Aggregate Aggregate is a component of a composite material used to resist compressive stress and provide bulk to the composite material. For efficient filling,
More informationDegree Offered: B.S. in Civil Engineering; Areas of Specialization: Geotechnical, Water Resources, and Structural
Civil Engineering Professors Cal (Chair of Department), Richardson Associate Professor Wilson Assistant Professor Dong Adjunct Faculty Ghosh, Hendrickx, McCord, McMullin, Kuhn Degree Offered: B.S. in Civil
More informationUnited-Heider Inspection Group Goldencrest Drive, Suite 114, Moreno Valley, CA 92553, USA Martin Lowenthal, General Manager
IAS Accreditation Number Company Name Address Contact Name Telephone +1 (951) 697-4777 Effective Date of Scope August 28, 2017 Accreditation Standard ISO/IEC 17025:2005 CMT TL-699 22620 Goldencrest Drive,
More informationINSTITUTE OF CONCRETE TECHNOLOGY CONCRETE TECHNOLOGY & CONSTRUCTION Stage 2: GENERAL PRINCIPLES Learning objectives
INSTITUTE OF CONCRETE TECHNOLOGY CONCRETE TECHNOLOGY & CONSTRUCTION Stage 2: GENERAL PRINCIPLES Learning objectives 2.00 Introduction to the course 2.00.01 Outline the aims, objectives and content of the
More informationCivil Engineering (CVEG)
2017-2018 Prairie View A & M University 1 Civil Engineering (CVEG) Courses CVEG 1011 Intro Engineering & Comp Sci: 1 semester hour. Introduction to basic engineering, computer science and technology concepts.
More informationHND CIVIL ENGINEERING COURSE OUTLINE
HND CIVIL ENGINEERING COURSE OUTLINE AFS 102: AFRICAN STUDIES (2-0-2) Pre-historic Africa and the great civilizations of Africa, traditional African government, social systems and practices. COS 101: COMMUNICATION
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TOLUNAY-WONG ENGINEERS, INC 10710 Sam Houston Parkway West, Suite 100 Houston, TX 77031 Patricia Hodgkins Phone: 504 202 7541 Valid To: February 29, 2020 Certificate
More informationName of the Department: Mechanical Engineering. Semester: III rd Semester. Laboratory Name: Manufacturing Process- I
Name of the Department: Mechanical Engineering Semester: III rd Semester Laboratory Name: Manufacturing Process- I 1. Study of Cupola furnace. 2. Study of Moulding techniques. 3. Study of Casting process.
More informationIAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531
IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA 98531 Contact Name Tim A. Barney, President Telephone (360) 736-3922 Effective Date of Scope November 30, 2017
More informationPROGRAMME OF WORK : STANDARDS
Report : 09-0- Of 7 08 08/SC 0 470 (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes 08-08-0 508.0 Concrete retaining blocks 08-08-0 54 (SABS 54) 4.0 Concrete roofing tiles 08-08-0
More informationCIVIL ENGINEERING. Subject Code: CE. Course Structure. Engineering Mathematics. Ordinary Differential Equation (ODE)
CIVIL ENGINEERING Subject Code: CE Course Structure Sections/Units Section A Unit 2 Unit 3 Unit 4 Unit 5 Unit 6 Section B Unit 2 Unit 3 Unit 4 Unit 5 Unit 6 Section C Unit 2 Section D Topics Engineering
More informationCivil Engineering (CE)
Civil Engineering (CE) 1 Civil Engineering (CE) Courses CE A201 Introduction to Civil Engineering 1 Credit Introduces students to roles, responsibilities, and capabilities of the various civil engineering
More informationGATE Civil Engineering Syllabus. Linear Algebra: Matrix algebra; Systems of linear equations; Eigen values and Eigen
GATE Civil Engineering Syllabus Section 1: Engineering Mathematics Linear Algebra: Matrix algebra; Systems of linear equations; Eigen values and Eigen vectors. Calculus: Functions of single variable; Limit,
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
This annex is valid from: 16-08-2017 to 01-08-2020 Replaces annex dated: 23-05-2016 Vlamoven 41 6826 TM Arnhem The Netherlands Location(s) where activities are performed under accreditation Head Office
More informationGeotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
More information